diff options
Diffstat (limited to 'drivers/cpufreq/cpufreq-dt.c')
-rw-r--r-- | drivers/cpufreq/cpufreq-dt.c | 151 |
1 files changed, 100 insertions, 51 deletions
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 6bbb8b9..9bc2720 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -18,6 +18,7 @@ #include <linux/cpu.h> #include <linux/cpu_cooling.h> #include <linux/cpufreq.h> +#include <linux/cpufreq-dt.h> #include <linux/cpumask.h> #include <linux/err.h> #include <linux/module.h> @@ -57,6 +58,8 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index) old_freq = clk_get_rate(cpu_clk) / 1000; if (!IS_ERR(cpu_reg)) { + unsigned long opp_freq; + rcu_read_lock(); opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz); if (IS_ERR(opp)) { @@ -66,13 +69,16 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index) return PTR_ERR(opp); } volt = dev_pm_opp_get_voltage(opp); + opp_freq = dev_pm_opp_get_freq(opp); rcu_read_unlock(); tol = volt * priv->voltage_tolerance / 100; volt_old = regulator_get_voltage(cpu_reg); + dev_dbg(cpu_dev, "Found OPP: %ld kHz, %ld uV\n", + opp_freq / 1000, volt); } dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", - old_freq / 1000, volt_old ? volt_old / 1000 : -1, + old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1, new_freq / 1000, volt ? volt / 1000 : -1); /* scaling up? scale voltage before frequency */ @@ -88,7 +94,7 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index) ret = clk_set_rate(cpu_clk, freq_exact); if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); - if (!IS_ERR(cpu_reg)) + if (!IS_ERR(cpu_reg) && volt_old > 0) regulator_set_voltage_tol(cpu_reg, volt_old, tol); return ret; } @@ -146,8 +152,8 @@ try_again: goto try_again; } - dev_warn(cpu_dev, "failed to get cpu%d regulator: %ld\n", - cpu, PTR_ERR(cpu_reg)); + dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n", + cpu, PTR_ERR(cpu_reg)); } cpu_clk = clk_get(cpu_dev, NULL); @@ -165,8 +171,8 @@ try_again: if (ret == -EPROBE_DEFER) dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu); else - dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", ret, - cpu); + dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu, + ret); } else { *cdev = cpu_dev; *creg = cpu_reg; @@ -178,13 +184,14 @@ try_again: static int cpufreq_init(struct cpufreq_policy *policy) { + struct cpufreq_dt_platform_data *pd; struct cpufreq_frequency_table *freq_table; - struct thermal_cooling_device *cdev; struct device_node *np; struct private_data *priv; struct device *cpu_dev; struct regulator *cpu_reg; struct clk *cpu_clk; + unsigned long min_uV = ~0, max_uV = 0; unsigned int transition_latency; int ret; @@ -204,16 +211,10 @@ static int cpufreq_init(struct cpufreq_policy *policy) /* OPPs might be populated at runtime, don't check for error here */ of_init_opp_table(cpu_dev); - ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); - if (ret) { - dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); - goto out_put_node; - } - priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { ret = -ENOMEM; - goto out_free_table; + goto out_free_opp; } of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance); @@ -222,42 +223,49 @@ static int cpufreq_init(struct cpufreq_policy *policy) transition_latency = CPUFREQ_ETERNAL; if (!IS_ERR(cpu_reg)) { - struct dev_pm_opp *opp; - unsigned long min_uV, max_uV; - int i; + unsigned long opp_freq = 0; /* - * OPP is maintained in order of increasing frequency, and - * freq_table initialised from OPP is therefore sorted in the - * same order. + * Disable any OPPs where the connected regulator isn't able to + * provide the specified voltage and record minimum and maximum + * voltage levels. */ - for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) - ; - rcu_read_lock(); - opp = dev_pm_opp_find_freq_exact(cpu_dev, - freq_table[0].frequency * 1000, true); - min_uV = dev_pm_opp_get_voltage(opp); - opp = dev_pm_opp_find_freq_exact(cpu_dev, - freq_table[i-1].frequency * 1000, true); - max_uV = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); + while (1) { + struct dev_pm_opp *opp; + unsigned long opp_uV, tol_uV; + + rcu_read_lock(); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + break; + } + opp_uV = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + + tol_uV = opp_uV * priv->voltage_tolerance / 100; + if (regulator_is_supported_voltage(cpu_reg, opp_uV, + opp_uV + tol_uV)) { + if (opp_uV < min_uV) + min_uV = opp_uV; + if (opp_uV > max_uV) + max_uV = opp_uV; + } else { + dev_pm_opp_disable(cpu_dev, opp_freq); + } + + opp_freq++; + } + ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); if (ret > 0) transition_latency += ret * 1000; } - /* - * For now, just loading the cooling device; - * thermal DT code takes care of matching them. - */ - if (of_find_property(np, "#cooling-cells", NULL)) { - cdev = of_cpufreq_cooling_register(np, cpu_present_mask); - if (IS_ERR(cdev)) - dev_err(cpu_dev, - "running cpufreq without cooling device: %ld\n", - PTR_ERR(cdev)); - else - priv->cdev = cdev; + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + pr_err("failed to init cpufreq table: %d\n", ret); + goto out_free_priv; } priv->cpu_dev = cpu_dev; @@ -265,20 +273,29 @@ static int cpufreq_init(struct cpufreq_policy *policy) policy->driver_data = priv; policy->clk = cpu_clk; - ret = cpufreq_generic_init(policy, freq_table, transition_latency); - if (ret) - goto out_cooling_unregister; + ret = cpufreq_table_validate_and_show(policy, freq_table); + if (ret) { + dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__, + ret); + goto out_free_cpufreq_table; + } + + policy->cpuinfo.transition_latency = transition_latency; + + pd = cpufreq_get_driver_data(); + if (!pd || !pd->independent_clocks) + cpumask_setall(policy->cpus); of_node_put(np); return 0; -out_cooling_unregister: - cpufreq_cooling_unregister(priv->cdev); - kfree(priv); -out_free_table: +out_free_cpufreq_table: dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); -out_put_node: +out_free_priv: + kfree(priv); +out_free_opp: + of_free_opp_table(cpu_dev); of_node_put(np); out_put_reg_clk: clk_put(cpu_clk); @@ -292,8 +309,10 @@ static int cpufreq_exit(struct cpufreq_policy *policy) { struct private_data *priv = policy->driver_data; - cpufreq_cooling_unregister(priv->cdev); + if (priv->cdev) + cpufreq_cooling_unregister(priv->cdev); dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); + of_free_opp_table(priv->cpu_dev); clk_put(policy->clk); if (!IS_ERR(priv->cpu_reg)) regulator_put(priv->cpu_reg); @@ -302,6 +321,33 @@ static int cpufreq_exit(struct cpufreq_policy *policy) return 0; } +static void cpufreq_ready(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + struct device_node *np = of_node_get(priv->cpu_dev->of_node); + + if (WARN_ON(!np)) + return; + + /* + * For now, just loading the cooling device; + * thermal DT code takes care of matching them. + */ + if (of_find_property(np, "#cooling-cells", NULL)) { + priv->cdev = of_cpufreq_cooling_register(np, + policy->related_cpus); + if (IS_ERR(priv->cdev)) { + dev_err(priv->cpu_dev, + "running cpufreq without cooling device: %ld\n", + PTR_ERR(priv->cdev)); + + priv->cdev = NULL; + } + } + + of_node_put(np); +} + static struct cpufreq_driver dt_cpufreq_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, @@ -309,6 +355,7 @@ static struct cpufreq_driver dt_cpufreq_driver = { .get = cpufreq_generic_get, .init = cpufreq_init, .exit = cpufreq_exit, + .ready = cpufreq_ready, .name = "cpufreq-dt", .attr = cpufreq_generic_attr, }; @@ -335,6 +382,8 @@ static int dt_cpufreq_probe(struct platform_device *pdev) if (!IS_ERR(cpu_reg)) regulator_put(cpu_reg); + dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev); + ret = cpufreq_register_driver(&dt_cpufreq_driver); if (ret) dev_err(cpu_dev, "failed register driver: %d\n", ret); |