diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 3 | ||||
| -rw-r--r-- | drivers/clocksource/bcm2835_timer.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/clksrc-dbx500-prcmu.c | 3 | ||||
| -rw-r--r-- | drivers/clocksource/dummy_timer.c | 69 | ||||
| -rw-r--r-- | drivers/clocksource/dw_apb_timer.c | 12 | ||||
| -rw-r--r-- | drivers/clocksource/dw_apb_timer_of.c | 6 | ||||
| -rw-r--r-- | drivers/clocksource/mxs_timer.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/nomadik-mtu.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/samsung_pwm_timer.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/tegra20_timer.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/time-armada-370-xp.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/timer-marco.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/timer-prima2.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/vf_pit_timer.c | 194 | ||||
| -rw-r--r-- | drivers/clocksource/zevio-timer.c | 215 |
16 files changed, 497 insertions, 26 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5871933..81465c2 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -87,3 +87,8 @@ config CLKSRC_SAMSUNG_PWM Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver for all devicetree enabled platforms. This driver will be needed only on systems that do not have the Exynos MCT available. + +config VF_PIT_TIMER + bool + help + Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 8d979c7..9ba8b4d 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -22,10 +22,13 @@ obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o +obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o +obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o +obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c index 766611d..07ea7ce 100644 --- a/drivers/clocksource/bcm2835_timer.c +++ b/drivers/clocksource/bcm2835_timer.c @@ -28,8 +28,8 @@ #include <linux/of_platform.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/sched_clock.h> -#include <asm/sched_clock.h> #include <asm/irq.h> #define REG_CONTROL 0x00 diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c index 77398f8..a9fd4ad 100644 --- a/drivers/clocksource/clksrc-dbx500-prcmu.c +++ b/drivers/clocksource/clksrc-dbx500-prcmu.c @@ -14,8 +14,7 @@ */ #include <linux/clockchips.h> #include <linux/clksrc-dbx500-prcmu.h> - -#include <asm/sched_clock.h> +#include <linux/sched_clock.h> #define RATE_32K 32768 diff --git a/drivers/clocksource/dummy_timer.c b/drivers/clocksource/dummy_timer.c new file mode 100644 index 0000000..1f55f96 --- /dev/null +++ b/drivers/clocksource/dummy_timer.c @@ -0,0 +1,69 @@ +/* + * linux/drivers/clocksource/dummy_timer.c + * + * Copyright (C) 2013 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clockchips.h> +#include <linux/cpu.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/cpumask.h> + +static DEFINE_PER_CPU(struct clock_event_device, dummy_timer_evt); + +static void dummy_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + /* + * Core clockevents code will call this when exchanging timer devices. + * We don't need to do anything here. + */ +} + +static void __cpuinit dummy_timer_setup(void) +{ + int cpu = smp_processor_id(); + struct clock_event_device *evt = __this_cpu_ptr(&dummy_timer_evt); + + evt->name = "dummy_timer"; + evt->features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_DUMMY; + evt->rating = 100; + evt->set_mode = dummy_timer_set_mode; + evt->cpumask = cpumask_of(cpu); + + clockevents_register_device(evt); +} + +static int __cpuinit dummy_timer_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) == CPU_STARTING) + dummy_timer_setup(); + + return NOTIFY_OK; +} + +static struct notifier_block dummy_timer_cpu_nb __cpuinitdata = { + .notifier_call = dummy_timer_cpu_notify, +}; + +static int __init dummy_timer_register(void) +{ + int err = register_cpu_notifier(&dummy_timer_cpu_nb); + if (err) + return err; + + /* We won't get a call on the boot CPU, so register immediately */ + if (num_possible_cpus() > 1) + dummy_timer_setup(); + + return 0; +} +early_initcall(dummy_timer_register); diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c index 8c2a35f..e54ca10 100644 --- a/drivers/clocksource/dw_apb_timer.c +++ b/drivers/clocksource/dw_apb_timer.c @@ -387,15 +387,3 @@ cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs) { return (cycle_t)~apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE); } - -/** - * dw_apb_clocksource_unregister() - unregister and free a clocksource. - * - * @dw_cs: The clocksource to unregister/free. - */ -void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs) -{ - clocksource_unregister(&dw_cs->cs); - - kfree(dw_cs); -} diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index cef5544..4cbae4f 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -21,9 +21,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/clk.h> - -#include <asm/mach/time.h> -#include <asm/sched_clock.h> +#include <linux/sched_clock.h> static void timer_get_base_and_rate(struct device_node *np, void __iomem **base, u32 *rate) @@ -68,7 +66,7 @@ static void add_clockevent(struct device_node *event_timer) u32 irq, rate; irq = irq_of_parse_and_map(event_timer, 0); - if (irq == NO_IRQ) + if (irq == 0) panic("No IRQ for clock event timer"); timer_get_base_and_rate(event_timer, &iobase, &rate); diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c index 02af420..0f5e65f 100644 --- a/drivers/clocksource/mxs_timer.c +++ b/drivers/clocksource/mxs_timer.c @@ -29,9 +29,9 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/stmp_device.h> +#include <linux/sched_clock.h> #include <asm/mach/time.h> -#include <asm/sched_clock.h> /* * There are 2 versions of the timrot on Freescale MXS-based SoCs. diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index b9415b6..7d2c2c5 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -21,8 +21,8 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/platform_data/clocksource-nomadik-mtu.h> +#include <linux/sched_clock.h> #include <asm/mach/time.h> -#include <asm/sched_clock.h> /* * The MTU device hosts four different counters, with 4 set of diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c index 0234c8d..584b547 100644 --- a/drivers/clocksource/samsung_pwm_timer.c +++ b/drivers/clocksource/samsung_pwm_timer.c @@ -21,10 +21,10 @@ #include <linux/of_irq.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/sched_clock.h> #include <clocksource/samsung_pwm.h> -#include <asm/sched_clock.h> /* * Clocksource driver diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c index ae877b0..9396170 100644 --- a/drivers/clocksource/tegra20_timer.c +++ b/drivers/clocksource/tegra20_timer.c @@ -26,10 +26,10 @@ #include <linux/io.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/sched_clock.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> -#include <asm/sched_clock.h> #define RTC_SECONDS 0x08 #define RTC_SHADOW_SECONDS 0x0c diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c index 47a6730..efdca32 100644 --- a/drivers/clocksource/time-armada-370-xp.c +++ b/drivers/clocksource/time-armada-370-xp.c @@ -27,8 +27,8 @@ #include <linux/of_address.h> #include <linux/irq.h> #include <linux/module.h> +#include <linux/sched_clock.h> -#include <asm/sched_clock.h> #include <asm/localtimer.h> #include <linux/percpu.h> /* diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c index 97738db..e5dc912 100644 --- a/drivers/clocksource/timer-marco.c +++ b/drivers/clocksource/timer-marco.c @@ -17,7 +17,7 @@ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_address.h> -#include <asm/sched_clock.h> +#include <linux/sched_clock.h> #include <asm/localtimer.h> #include <asm/mach/time.h> diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c index 7608826..ef3cfb2 100644 --- a/drivers/clocksource/timer-prima2.c +++ b/drivers/clocksource/timer-prima2.c @@ -18,7 +18,7 @@ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_address.h> -#include <asm/sched_clock.h> +#include <linux/sched_clock.h> #include <asm/mach/time.h> #define SIRFSOC_TIMER_COUNTER_LO 0x0000 diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c new file mode 100644 index 0000000..587e020 --- /dev/null +++ b/drivers/clocksource/vf_pit_timer.c @@ -0,0 +1,194 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + */ + +#include <linux/interrupt.h> +#include <linux/clockchips.h> +#include <linux/clk.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/sched_clock.h> + +/* + * Each pit takes 0x10 Bytes register space + */ +#define PITMCR 0x00 +#define PIT0_OFFSET 0x100 +#define PITn_OFFSET(n) (PIT0_OFFSET + 0x10 * (n)) +#define PITLDVAL 0x00 +#define PITCVAL 0x04 +#define PITTCTRL 0x08 +#define PITTFLG 0x0c + +#define PITMCR_MDIS (0x1 << 1) + +#define PITTCTRL_TEN (0x1 << 0) +#define PITTCTRL_TIE (0x1 << 1) +#define PITCTRL_CHN (0x1 << 2) + +#define PITTFLG_TIF 0x1 + +static void __iomem *clksrc_base; +static void __iomem *clkevt_base; +static unsigned long cycle_per_jiffy; + +static inline void pit_timer_enable(void) +{ + __raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL); +} + +static inline void pit_timer_disable(void) +{ + __raw_writel(0, clkevt_base + PITTCTRL); +} + +static inline void pit_irq_acknowledge(void) +{ + __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG); +} + +static unsigned int pit_read_sched_clock(void) +{ + return __raw_readl(clksrc_base + PITCVAL); +} + +static int __init pit_clocksource_init(unsigned long rate) +{ + /* set the max load value and start the clock source counter */ + __raw_writel(0, clksrc_base + PITTCTRL); + __raw_writel(~0UL, clksrc_base + PITLDVAL); + __raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL); + + setup_sched_clock(pit_read_sched_clock, 32, rate); + return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate, + 300, 32, clocksource_mmio_readl_down); +} + +static int pit_set_next_event(unsigned long delta, + struct clock_event_device *unused) +{ + /* + * set a new value to PITLDVAL register will not restart the timer, + * to abort the current cycle and start a timer period with the new + * value, the timer must be disabled and enabled again. + * and the PITLAVAL should be set to delta minus one according to pit + * hardware requirement. + */ + pit_timer_disable(); + __raw_writel(delta - 1, clkevt_base + PITLDVAL); + pit_timer_enable(); + + return 0; +} + +static void pit_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pit_set_next_event(cycle_per_jiffy, evt); + break; + default: + break; + } +} + +static irqreturn_t pit_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + pit_irq_acknowledge(); + + /* + * pit hardware doesn't support oneshot, it will generate an interrupt + * and reload the counter value from PITLDVAL when PITCVAL reach zero, + * and start the counter again. So software need to disable the timer + * to stop the counter loop in ONESHOT mode. + */ + if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT)) + pit_timer_disable(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct clock_event_device clockevent_pit = { + .name = "VF pit timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = pit_set_mode, + .set_next_event = pit_set_next_event, + .rating = 300, +}; + +static struct irqaction pit_timer_irq = { + .name = "VF pit timer", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = pit_timer_interrupt, + .dev_id = &clockevent_pit, +}; + +static int __init pit_clockevent_init(unsigned long rate, int irq) +{ + __raw_writel(0, clkevt_base + PITTCTRL); + __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG); + + BUG_ON(setup_irq(irq, &pit_timer_irq)); + + clockevent_pit.cpumask = cpumask_of(0); + clockevent_pit.irq = irq; + /* + * The value for the LDVAL register trigger is calculated as: + * LDVAL trigger = (period / clock period) - 1 + * The pit is a 32-bit down count timer, when the conter value + * reaches 0, it will generate an interrupt, thus the minimal + * LDVAL trigger value is 1. And then the min_delta is + * minimal LDVAL trigger value + 1, and the max_delta is full 32-bit. + */ + clockevents_config_and_register(&clockevent_pit, rate, 2, 0xffffffff); + + return 0; +} + +static void __init pit_timer_init(struct device_node *np) +{ + struct clk *pit_clk; + void __iomem *timer_base; + unsigned long clk_rate; + int irq; + + timer_base = of_iomap(np, 0); + BUG_ON(!timer_base); + + /* + * PIT0 and PIT1 can be chained to build a 64-bit timer, + * so choose PIT2 as clocksource, PIT3 as clockevent device, + * and leave PIT0 and PIT1 unused for anyone else who needs them. + */ + clksrc_base = timer_base + PITn_OFFSET(2); + clkevt_base = timer_base + PITn_OFFSET(3); + + irq = irq_of_parse_and_map(np, 0); + BUG_ON(irq <= 0); + + pit_clk = of_clk_get(np, 0); + BUG_ON(IS_ERR(pit_clk)); + + BUG_ON(clk_prepare_enable(pit_clk)); + + clk_rate = clk_get_rate(pit_clk); + cycle_per_jiffy = clk_rate / (HZ); + + /* enable the pit module */ + __raw_writel(~PITMCR_MDIS, timer_base + PITMCR); + + BUG_ON(pit_clocksource_init(clk_rate)); + + pit_clockevent_init(clk_rate, irq); +} +CLOCKSOURCE_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init); diff --git a/drivers/clocksource/zevio-timer.c b/drivers/clocksource/zevio-timer.c new file mode 100644 index 0000000..ca81809 --- /dev/null +++ b/drivers/clocksource/zevio-timer.c @@ -0,0 +1,215 @@ +/* + * linux/drivers/clocksource/zevio-timer.c + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +#define IO_CURRENT_VAL 0x00 +#define IO_DIVIDER 0x04 +#define IO_CONTROL 0x08 + +#define IO_TIMER1 0x00 +#define IO_TIMER2 0x0C + +#define IO_MATCH_BEGIN 0x18 +#define IO_MATCH(x) (IO_MATCH_BEGIN + ((x) << 2)) + +#define IO_INTR_STS 0x00 +#define IO_INTR_ACK 0x00 +#define IO_INTR_MSK 0x04 + +#define CNTL_STOP_TIMER (1 << 4) +#define CNTL_RUN_TIMER (0 << 4) + +#define CNTL_INC (1 << 3) +#define CNTL_DEC (0 << 3) + +#define CNTL_TOZERO 0 +#define CNTL_MATCH(x) ((x) + 1) +#define CNTL_FOREVER 7 + +/* There are 6 match registers but we only use one. */ +#define TIMER_MATCH 0 + +#define TIMER_INTR_MSK (1 << (TIMER_MATCH)) +#define TIMER_INTR_ALL 0x3F + +struct zevio_timer { + void __iomem *base; + void __iomem *timer1, *timer2; + void __iomem *interrupt_regs; + + struct clk *clk; + struct clock_event_device clkevt; + struct irqaction clkevt_irq; + + char clocksource_name[64]; + char clockevent_name[64]; +}; + +static int zevio_timer_set_event(unsigned long delta, + struct clock_event_device *dev) +{ + struct zevio_timer *timer = container_of(dev, struct zevio_timer, + clkevt); + + writel(delta, timer->timer1 + IO_CURRENT_VAL); + writel(CNTL_RUN_TIMER | CNTL_DEC | CNTL_MATCH(TIMER_MATCH), + timer->timer1 + IO_CONTROL); + + return 0; +} + +static void zevio_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *dev) +{ + struct zevio_timer *timer = container_of(dev, struct zevio_timer, + clkevt); + + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_ONESHOT: + /* Enable timer interrupts */ + writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK); + writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* Disable timer interrupts */ + writel(0, timer->interrupt_regs + IO_INTR_MSK); + writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK); + /* Stop timer */ + writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL); + break; + case CLOCK_EVT_MODE_PERIODIC: + default: + /* Unsupported */ + break; + } +} + +static irqreturn_t zevio_timer_interrupt(int irq, void *dev_id) +{ + struct zevio_timer *timer = dev_id; + u32 intr; + + intr = readl(timer->interrupt_regs + IO_INTR_ACK); + if (!(intr & TIMER_INTR_MSK)) + return IRQ_NONE; + + writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_ACK); + writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL); + + if (timer->clkevt.event_handler) + timer->clkevt.event_handler(&timer->clkevt); + + return IRQ_HANDLED; +} + +static int __init zevio_timer_add(struct device_node *node) +{ + struct zevio_timer *timer; + struct resource res; + int irqnr, ret; + + timer = kzalloc(sizeof(*timer), GFP_KERNEL); + if (!timer) + return -ENOMEM; + + timer->base = of_iomap(node, 0); + if (!timer->base) { + ret = -EINVAL; + goto error_free; + } + timer->timer1 = timer->base + IO_TIMER1; + timer->timer2 = timer->base + IO_TIMER2; + + timer->clk = of_clk_get(node, 0); + if (IS_ERR(timer->clk)) { + ret = PTR_ERR(timer->clk); + pr_err("Timer clock not found! (error %d)\n", ret); + goto error_unmap; + } + + timer->interrupt_regs = of_iomap(node, 1); + irqnr = irq_of_parse_and_map(node, 0); + + of_address_to_resource(node, 0, &res); + scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name), + "%llx.%s_clocksource", + (unsigned long long)res.start, node->name); + + scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name), + "%llx.%s_clockevent", + (unsigned long long)res.start, node->name); + + if (timer->interrupt_regs && irqnr) { + timer->clkevt.name = timer->clockevent_name; + timer->clkevt.set_next_event = zevio_timer_set_event; + timer->clkevt.set_mode = zevio_timer_set_mode; + timer->clkevt.rating = 200; + timer->clkevt.cpumask = cpu_all_mask; + timer->clkevt.features = CLOCK_EVT_FEAT_ONESHOT; + timer->clkevt.irq = irqnr; + + writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL); + writel(0, timer->timer1 + IO_DIVIDER); + + /* Start with timer interrupts disabled */ + writel(0, timer->interrupt_regs + IO_INTR_MSK); + writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK); + + /* Interrupt to occur when timer value matches 0 */ + writel(0, timer->base + IO_MATCH(TIMER_MATCH)); + + timer->clkevt_irq.name = timer->clockevent_name; + timer->clkevt_irq.handler = zevio_timer_interrupt; + timer->clkevt_irq.dev_id = timer; + timer->clkevt_irq.flags = IRQF_TIMER | IRQF_IRQPOLL; + + setup_irq(irqnr, &timer->clkevt_irq); + + clockevents_config_and_register(&timer->clkevt, + clk_get_rate(timer->clk), 0x0001, 0xffff); + pr_info("Added %s as clockevent\n", timer->clockevent_name); + } + + writel(CNTL_STOP_TIMER, timer->timer2 + IO_CONTROL); + writel(0, timer->timer2 + IO_CURRENT_VAL); + writel(0, timer->timer2 + IO_DIVIDER); + writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC, + timer->timer2 + IO_CONTROL); + + clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL, + timer->clocksource_name, + clk_get_rate(timer->clk), + 200, 16, + clocksource_mmio_readw_up); + + pr_info("Added %s as clocksource\n", timer->clocksource_name); + + return 0; +error_unmap: + iounmap(timer->base); +error_free: + kfree(timer); + return ret; +} + +CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_add); |
