summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/Kconfig12
-rw-r--r--drivers/clocksource/Makefile5
-rw-r--r--drivers/clocksource/arm_arch_timer.c391
-rw-r--r--drivers/clocksource/arm_generic.c232
-rw-r--r--drivers/clocksource/bcm2835_timer.c9
-rw-r--r--drivers/clocksource/clksrc-of.c35
-rw-r--r--drivers/clocksource/cs5535-clockevt.c11
-rw-r--r--drivers/clocksource/dw_apb_timer_of.c6
-rw-r--r--drivers/clocksource/nomadik-mtu.c45
-rw-r--r--drivers/clocksource/sunxi_timer.c21
-rw-r--r--drivers/clocksource/tcb_clksrc.c7
-rw-r--r--drivers/clocksource/tegra20_timer.c281
-rw-r--r--drivers/clocksource/time-armada-370-xp.c150
-rw-r--r--drivers/clocksource/vt8500_timer.c180
14 files changed, 1055 insertions, 330 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 75bc752..e507ab7 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,3 +1,6 @@
+config CLKSRC_OF
+ bool
+
config CLKSRC_I8253
bool
@@ -25,6 +28,9 @@ config ARMADA_370_XP_TIMER
config SUNXI_TIMER
bool
+config VT8500_TIMER
+ bool
+
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
@@ -54,10 +60,8 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
help
Use the always on PRCMU Timer as sched_clock
-config CLKSRC_ARM_GENERIC
- def_bool y if ARM64
- help
- This option enables support for the ARM generic timer.
+config ARM_ARCH_TIMER
+ bool
config CLKSRC_METAG_GENERIC
def_bool y if METAG
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 09dcd49..4d8283a 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o
obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
@@ -16,6 +17,8 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
+obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
+obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
-obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o
+obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
new file mode 100644
index 0000000..d7ad425
--- /dev/null
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -0,0 +1,391 @@
+/*
+ * linux/drivers/clocksource/arm_arch_timer.c
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+#include <asm/arch_timer.h>
+#include <asm/virt.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+static u32 arch_timer_rate;
+
+enum ppi_nr {
+ PHYS_SECURE_PPI,
+ PHYS_NONSECURE_PPI,
+ VIRT_PPI,
+ HYP_PPI,
+ MAX_TIMER_PPI
+};
+
+static int arch_timer_ppi[MAX_TIMER_PPI];
+
+static struct clock_event_device __percpu *arch_timer_evt;
+
+static bool arch_timer_use_virtual = true;
+
+/*
+ * Architected system timer support.
+ */
+
+static inline irqreturn_t timer_handler(const int access,
+ struct clock_event_device *evt)
+{
+ unsigned long ctrl;
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
+ if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
+ ctrl |= ARCH_TIMER_CTRL_IT_MASK;
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt);
+}
+
+static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt);
+}
+
+static inline void timer_set_mode(const int access, int mode)
+{
+ unsigned long ctrl;
+ switch (mode) {
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
+ ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
+ break;
+ default:
+ break;
+ }
+}
+
+static void arch_timer_set_mode_virt(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode);
+}
+
+static void arch_timer_set_mode_phys(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode);
+}
+
+static inline void set_next_event(const int access, unsigned long evt)
+{
+ unsigned long ctrl;
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
+ ctrl |= ARCH_TIMER_CTRL_ENABLE;
+ ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+ arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt);
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
+}
+
+static int arch_timer_set_next_event_virt(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ set_next_event(ARCH_TIMER_VIRT_ACCESS, evt);
+ return 0;
+}
+
+static int arch_timer_set_next_event_phys(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ set_next_event(ARCH_TIMER_PHYS_ACCESS, evt);
+ return 0;
+}
+
+static int __cpuinit arch_timer_setup(struct clock_event_device *clk)
+{
+ clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
+ clk->name = "arch_sys_timer";
+ clk->rating = 450;
+ if (arch_timer_use_virtual) {
+ clk->irq = arch_timer_ppi[VIRT_PPI];
+ clk->set_mode = arch_timer_set_mode_virt;
+ clk->set_next_event = arch_timer_set_next_event_virt;
+ } else {
+ clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
+ clk->set_mode = arch_timer_set_mode_phys;
+ clk->set_next_event = arch_timer_set_next_event_phys;
+ }
+
+ clk->cpumask = cpumask_of(smp_processor_id());
+
+ clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, NULL);
+
+ clockevents_config_and_register(clk, arch_timer_rate,
+ 0xf, 0x7fffffff);
+
+ if (arch_timer_use_virtual)
+ enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0);
+ else {
+ enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0);
+ if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+ enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0);
+ }
+
+ arch_counter_set_user_access();
+
+ return 0;
+}
+
+static int arch_timer_available(void)
+{
+ u32 freq;
+
+ if (arch_timer_rate == 0) {
+ freq = arch_timer_get_cntfrq();
+
+ /* Check the timer frequency. */
+ if (freq == 0) {
+ pr_warn("Architected timer frequency not available\n");
+ return -EINVAL;
+ }
+
+ arch_timer_rate = freq;
+ }
+
+ pr_info_once("Architected local timer running at %lu.%02luMHz (%s).\n",
+ (unsigned long)arch_timer_rate / 1000000,
+ (unsigned long)(arch_timer_rate / 10000) % 100,
+ arch_timer_use_virtual ? "virt" : "phys");
+ return 0;
+}
+
+u32 arch_timer_get_rate(void)
+{
+ return arch_timer_rate;
+}
+
+/*
+ * Some external users of arch_timer_read_counter (e.g. sched_clock) may try to
+ * call it before it has been initialised. Rather than incur a performance
+ * penalty checking for initialisation, provide a default implementation that
+ * won't lead to time appearing to jump backwards.
+ */
+static u64 arch_timer_read_zero(void)
+{
+ return 0;
+}
+
+u64 (*arch_timer_read_counter)(void) = arch_timer_read_zero;
+
+static cycle_t arch_counter_read(struct clocksource *cs)
+{
+ return arch_timer_read_counter();
+}
+
+static cycle_t arch_counter_read_cc(const struct cyclecounter *cc)
+{
+ return arch_timer_read_counter();
+}
+
+static struct clocksource clocksource_counter = {
+ .name = "arch_sys_counter",
+ .rating = 400,
+ .read = arch_counter_read,
+ .mask = CLOCKSOURCE_MASK(56),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct cyclecounter cyclecounter = {
+ .read = arch_counter_read_cc,
+ .mask = CLOCKSOURCE_MASK(56),
+};
+
+static struct timecounter timecounter;
+
+struct timecounter *arch_timer_get_timecounter(void)
+{
+ return &timecounter;
+}
+
+static void __cpuinit arch_timer_stop(struct clock_event_device *clk)
+{
+ pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
+ clk->irq, smp_processor_id());
+
+ if (arch_timer_use_virtual)
+ disable_percpu_irq(arch_timer_ppi[VIRT_PPI]);
+ else {
+ disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]);
+ if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+ disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
+ }
+
+ clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+}
+
+static int __cpuinit arch_timer_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ struct clock_event_device *evt = this_cpu_ptr(arch_timer_evt);
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_STARTING:
+ arch_timer_setup(evt);
+ break;
+ case CPU_DYING:
+ arch_timer_stop(evt);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block arch_timer_cpu_nb __cpuinitdata = {
+ .notifier_call = arch_timer_cpu_notify,
+};
+
+static int __init arch_timer_register(void)
+{
+ int err;
+ int ppi;
+
+ err = arch_timer_available();
+ if (err)
+ goto out;
+
+ arch_timer_evt = alloc_percpu(struct clock_event_device);
+ if (!arch_timer_evt) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+ cyclecounter.mult = clocksource_counter.mult;
+ cyclecounter.shift = clocksource_counter.shift;
+ timecounter_init(&timecounter, &cyclecounter,
+ arch_counter_get_cntpct());
+
+ if (arch_timer_use_virtual) {
+ ppi = arch_timer_ppi[VIRT_PPI];
+ err = request_percpu_irq(ppi, arch_timer_handler_virt,
+ "arch_timer", arch_timer_evt);
+ } else {
+ ppi = arch_timer_ppi[PHYS_SECURE_PPI];
+ err = request_percpu_irq(ppi, arch_timer_handler_phys,
+ "arch_timer", arch_timer_evt);
+ if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) {
+ ppi = arch_timer_ppi[PHYS_NONSECURE_PPI];
+ err = request_percpu_irq(ppi, arch_timer_handler_phys,
+ "arch_timer", arch_timer_evt);
+ if (err)
+ free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
+ arch_timer_evt);
+ }
+ }
+
+ if (err) {
+ pr_err("arch_timer: can't register interrupt %d (%d)\n",
+ ppi, err);
+ goto out_free;
+ }
+
+ err = register_cpu_notifier(&arch_timer_cpu_nb);
+ if (err)
+ goto out_free_irq;
+
+ /* Immediately configure the timer on the boot CPU */
+ arch_timer_setup(this_cpu_ptr(arch_timer_evt));
+
+ return 0;
+
+out_free_irq:
+ if (arch_timer_use_virtual)
+ free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt);
+ else {
+ free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
+ arch_timer_evt);
+ if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+ free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI],
+ arch_timer_evt);
+ }
+
+out_free:
+ free_percpu(arch_timer_evt);
+out:
+ return err;
+}
+
+static const struct of_device_id arch_timer_of_match[] __initconst = {
+ { .compatible = "arm,armv7-timer", },
+ { .compatible = "arm,armv8-timer", },
+ {},
+};
+
+int __init arch_timer_init(void)
+{
+ struct device_node *np;
+ u32 freq;
+ int i;
+
+ np = of_find_matching_node(NULL, arch_timer_of_match);
+ if (!np) {
+ pr_err("arch_timer: can't find DT node\n");
+ return -ENODEV;
+ }
+
+ /* Try to determine the frequency from the device tree or CNTFRQ */
+ if (!of_property_read_u32(np, "clock-frequency", &freq))
+ arch_timer_rate = freq;
+
+ for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
+ arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+
+ of_node_put(np);
+
+ /*
+ * If HYP mode is available, we know that the physical timer
+ * has been configured to be accessible from PL1. Use it, so
+ * that a guest can use the virtual timer instead.
+ *
+ * If no interrupt provided for virtual timer, we'll have to
+ * stick to the physical timer. It'd better be accessible...
+ */
+ if (is_hyp_mode_available() || !arch_timer_ppi[VIRT_PPI]) {
+ arch_timer_use_virtual = false;
+
+ if (!arch_timer_ppi[PHYS_SECURE_PPI] ||
+ !arch_timer_ppi[PHYS_NONSECURE_PPI]) {
+ pr_warn("arch_timer: No interrupt available, giving up\n");
+ return -EINVAL;
+ }
+ }
+
+ if (arch_timer_use_virtual)
+ arch_timer_read_counter = arch_counter_get_cntvct;
+ else
+ arch_timer_read_counter = arch_counter_get_cntpct;
+
+ return arch_timer_register();
+}
diff --git a/drivers/clocksource/arm_generic.c b/drivers/clocksource/arm_generic.c
deleted file mode 100644
index 8ae1a61..0000000
--- a/drivers/clocksource/arm_generic.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Generic timers support
- *
- * Copyright (C) 2012 ARM Ltd.
- * Author: Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/of_irq.h>
-#include <linux/io.h>
-
-#include <clocksource/arm_generic.h>
-
-#include <asm/arm_generic.h>
-
-static u32 arch_timer_rate;
-static u64 sched_clock_mult __read_mostly;
-static DEFINE_PER_CPU(struct clock_event_device, arch_timer_evt);
-static int arch_timer_ppi;
-
-static irqreturn_t arch_timer_handle_irq(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
- unsigned long ctrl;
-
- ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
- if (ctrl & ARCH_TIMER_CTRL_ISTATUS) {
- ctrl |= ARCH_TIMER_CTRL_IMASK;
- arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
- evt->event_handler(evt);
- return IRQ_HANDLED;
- }
-
- return IRQ_NONE;
-}
-
-static void arch_timer_stop(void)
-{
- unsigned long ctrl;
-
- ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
- ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
- arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
-}
-
-static void arch_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
- switch (mode) {
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- arch_timer_stop();
- break;
- default:
- break;
- }
-}
-
-static int arch_timer_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long ctrl;
-
- ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
- ctrl |= ARCH_TIMER_CTRL_ENABLE;
- ctrl &= ~ARCH_TIMER_CTRL_IMASK;
-
- arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt);
- arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
-
- return 0;
-}
-
-static void __cpuinit arch_timer_setup(struct clock_event_device *clk)
-{
- /* Let's make sure the timer is off before doing anything else */
- arch_timer_stop();
-
- clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
- clk->name = "arch_sys_timer";
- clk->rating = 400;
- clk->set_mode = arch_timer_set_mode;
- clk->set_next_event = arch_timer_set_next_event;
- clk->irq = arch_timer_ppi;
- clk->cpumask = cpumask_of(smp_processor_id());
-
- clockevents_config_and_register(clk, arch_timer_rate,
- 0xf, 0x7fffffff);
-
- enable_percpu_irq(clk->irq, 0);
-
- /* Ensure the virtual counter is visible to userspace for the vDSO. */
- arch_counter_enable_user_access();
-}
-
-static void __init arch_timer_calibrate(void)
-{
- if (arch_timer_rate == 0) {
- arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0);
- arch_timer_rate = arch_timer_reg_read(ARCH_TIMER_REG_FREQ);
-
- /* Check the timer frequency. */
- if (arch_timer_rate == 0)
- panic("Architected timer frequency is set to zero.\n"
- "You must set this in your .dts file\n");
- }
-
- /* Cache the sched_clock multiplier to save a divide in the hot path. */
-
- sched_clock_mult = DIV_ROUND_CLOSEST(NSEC_PER_SEC, arch_timer_rate);
-
- pr_info("Architected local timer running at %u.%02uMHz.\n",
- arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100);
-}
-
-static cycle_t arch_counter_read(struct clocksource *cs)
-{
- return arch_counter_get_cntpct();
-}
-
-static struct clocksource clocksource_counter = {
- .name = "arch_sys_counter",
- .rating = 400,
- .read = arch_counter_read,
- .mask = CLOCKSOURCE_MASK(56),
- .flags = (CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_VALID_FOR_HRES),
-};
-
-int read_current_timer(unsigned long *timer_value)
-{
- *timer_value = arch_counter_get_cntpct();
- return 0;
-}
-
-unsigned long long notrace sched_clock(void)
-{
- return arch_counter_get_cntvct() * sched_clock_mult;
-}
-
-static int __cpuinit arch_timer_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
-{
- int cpu = (long)hcpu;
- struct clock_event_device *clk = per_cpu_ptr(&arch_timer_evt, cpu);
-
- switch(action) {
- case CPU_STARTING:
- case CPU_STARTING_FROZEN:
- arch_timer_setup(clk);
- break;
-
- case CPU_DYING:
- case CPU_DYING_FROZEN:
- pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
- clk->irq, cpu);
- disable_percpu_irq(clk->irq);
- arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata arch_timer_cpu_nb = {
- .notifier_call = arch_timer_cpu_notify,
-};
-
-static const struct of_device_id arch_timer_of_match[] __initconst = {
- { .compatible = "arm,armv8-timer" },
- {},
-};
-
-int __init arm_generic_timer_init(void)
-{
- struct device_node *np;
- int err;
- u32 freq;
-
- np = of_find_matching_node(NULL, arch_timer_of_match);
- if (!np) {
- pr_err("arch_timer: can't find DT node\n");
- return -ENODEV;
- }
-
- /* Try to determine the frequency from the device tree or CNTFRQ */
- if (!of_property_read_u32(np, "clock-frequency", &freq))
- arch_timer_rate = freq;
- arch_timer_calibrate();
-
- arch_timer_ppi = irq_of_parse_and_map(np, 0);
- pr_info("arch_timer: found %s irq %d\n", np->name, arch_timer_ppi);
-
- err = request_percpu_irq(arch_timer_ppi, arch_timer_handle_irq,
- np->name, &arch_timer_evt);
- if (err) {
- pr_err("arch_timer: can't register interrupt %d (%d)\n",
- arch_timer_ppi, err);
- return err;
- }
-
- clocksource_register_hz(&clocksource_counter, arch_timer_rate);
-
- /* Calibrate the delay loop directly */
- lpj_fine = DIV_ROUND_CLOSEST(arch_timer_rate, HZ);
-
- /* Immediately configure the timer on the boot CPU */
- arch_timer_setup(this_cpu_ptr(&arch_timer_evt));
-
- register_cpu_notifier(&arch_timer_cpu_nb);
-
- return 0;
-}
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index bc19f12..50c68fe 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -16,7 +16,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/bcm2835_timer.h>
#include <linux/bitops.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
@@ -101,7 +100,7 @@ static struct of_device_id bcm2835_time_match[] __initconst = {
{}
};
-static void __init bcm2835_time_init(void)
+static void __init bcm2835_timer_init(void)
{
struct device_node *node;
void __iomem *base;
@@ -155,7 +154,5 @@ static void __init bcm2835_time_init(void)
pr_info("bcm2835: system timer (irq = %d)\n", irq);
}
-
-struct sys_timer bcm2835_timer = {
- .init = bcm2835_time_init,
-};
+CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
+ bcm2835_timer_init);
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
new file mode 100644
index 0000000..bdabdaa
--- /dev/null
+++ b/drivers/clocksource/clksrc-of.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+
+extern struct of_device_id __clksrc_of_table[];
+
+static const struct of_device_id __clksrc_of_table_sentinel
+ __used __section(__clksrc_of_table_end);
+
+void __init clocksource_of_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ void (*init_func)(void);
+
+ for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
+ init_func = match->data;
+ init_func();
+ }
+}
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d927938..ea21048 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -100,7 +100,6 @@ static struct clock_event_device cs5535_clockevent = {
.set_mode = mfgpt_set_mode,
.set_next_event = mfgpt_next_event,
.rating = 250,
- .shift = 32
};
static irqreturn_t mfgpt_tick(int irq, void *dev_id)
@@ -169,17 +168,11 @@ static int __init cs5535_mfgpt_init(void)
cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val);
/* Set up the clock event */
- cs5535_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
- cs5535_clockevent.shift);
- cs5535_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
- &cs5535_clockevent);
- cs5535_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
- &cs5535_clockevent);
-
printk(KERN_INFO DRV_NAME
": Registering MFGPT timer as a clock event, using IRQ %d\n",
timer_irq);
- clockevents_register_device(&cs5535_clockevent);
+ clockevents_config_and_register(&cs5535_clockevent, MFGPT_HZ,
+ 0xF, 0xFFFE);
return 0;
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index f7dba5b..ab09ed3 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -107,7 +107,7 @@ static const struct of_device_id osctimer_ids[] __initconst = {
{},
};
-static void __init timer_init(void)
+void __init dw_apb_timer_init(void)
{
struct device_node *event_timer, *source_timer;
@@ -125,7 +125,3 @@ static void __init timer_init(void)
init_sched_clock();
}
-
-struct sys_timer dw_apb_timer = {
- .init = timer_init,
-};
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index 8914c3c..071f6ea 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -15,6 +15,7 @@
#include <linux/clocksource.h>
#include <linux/clk.h>
#include <linux/jiffies.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <asm/mach/time.h>
@@ -64,6 +65,7 @@ static void __iomem *mtu_base;
static bool clkevt_periodic;
static u32 clk_prescale;
static u32 nmdk_cycle; /* write-once */
+static struct delay_timer mtu_delay_timer;
#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
/*
@@ -80,6 +82,11 @@ static u32 notrace nomadik_read_sched_clock(void)
}
#endif
+static unsigned long nmdk_timer_read_current_timer(void)
+{
+ return ~readl_relaxed(mtu_base + MTU_VAL(0));
+}
+
/* Clockevent device: use one-shot mode */
static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
{
@@ -134,12 +141,32 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
}
}
+void nmdk_clksrc_reset(void)
+{
+ /* Disable */
+ writel(0, mtu_base + MTU_CR(0));
+
+ /* ClockSource: configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(0));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+ writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(0));
+}
+
+static void nmdk_clkevt_resume(struct clock_event_device *cedev)
+{
+ nmdk_clkevt_reset();
+ nmdk_clksrc_reset();
+}
+
static struct clock_event_device nmdk_clkevt = {
.name = "mtu_1",
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.rating = 200,
.set_mode = nmdk_clkevt_mode,
.set_next_event = nmdk_clkevt_next,
+ .resume = nmdk_clkevt_resume,
};
/*
@@ -161,19 +188,6 @@ static struct irqaction nmdk_timer_irq = {
.dev_id = &nmdk_clkevt,
};
-void nmdk_clksrc_reset(void)
-{
- /* Disable */
- writel(0, mtu_base + MTU_CR(0));
-
- /* ClockSource: configure load and background-load, and fire it up */
- writel(nmdk_cycle, mtu_base + MTU_LR(0));
- writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-
- writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
- mtu_base + MTU_CR(0));
-}
-
void __init nmdk_timer_init(void __iomem *base, int irq)
{
unsigned long rate;
@@ -226,5 +240,10 @@ void __init nmdk_timer_init(void __iomem *base, int irq)
/* Timer 1 is used for events, register irq and clockevents */
setup_irq(irq, &nmdk_timer_irq);
nmdk_clkevt.cpumask = cpumask_of(0);
+ nmdk_clkevt.irq = irq;
clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
+
+ mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer;
+ mtu_delay_timer.freq = rate;
+ register_current_timer_delay(&mtu_delay_timer);
}
diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c
index 3cd1bd3..4086b91 100644
--- a/drivers/clocksource/sunxi_timer.c
+++ b/drivers/clocksource/sunxi_timer.c
@@ -23,7 +23,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sunxi_timer.h>
-#include <linux/clk/sunxi.h>
+#include <linux/clk-provider.h>
#define TIMER_CTL_REG 0x00
#define TIMER_CTL_ENABLE (1 << 0)
@@ -74,7 +74,6 @@ static int sunxi_clkevt_next_event(unsigned long evt,
static struct clock_event_device sunxi_clockevent = {
.name = "sunxi_tick",
- .shift = 32,
.rating = 300,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sunxi_clkevt_mode,
@@ -104,7 +103,7 @@ static struct of_device_id sunxi_timer_dt_ids[] = {
{ }
};
-static void __init sunxi_timer_init(void)
+void __init sunxi_timer_init(void)
{
struct device_node *node;
unsigned long rate = 0;
@@ -124,7 +123,7 @@ static void __init sunxi_timer_init(void)
if (irq <= 0)
panic("Can't parse IRQ");
- sunxi_init_clocks();
+ of_clk_init(NULL);
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
@@ -154,18 +153,8 @@ static void __init sunxi_timer_init(void)
val = readl(timer_base + TIMER_CTL_REG);
writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG);
- sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL,
- NSEC_PER_SEC,
- sunxi_clockevent.shift);
- sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff,
- &sunxi_clockevent);
- sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1,
- &sunxi_clockevent);
sunxi_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&sunxi_clockevent);
+ clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL,
+ 0x1, 0xff);
}
-
-struct sys_timer sunxi_timer = {
- .init = sunxi_timer_init,
-};
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 32cb929..8a61872 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -157,7 +157,6 @@ static struct tc_clkevt_device clkevt = {
.name = "tc_clkevt",
.features = CLOCK_EVT_FEAT_PERIODIC
| CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
/* Should be lower than at91rm9200's system timer */
.rating = 125,
.set_next_event = tc_next_event,
@@ -196,13 +195,9 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
timer_clock = clk32k_divisor_idx;
- clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
- clkevt.clkevt.max_delta_ns
- = clockevent_delta2ns(0xffff, &clkevt.clkevt);
- clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
clkevt.clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&clkevt.clkevt);
+ clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);
setup_irq(irq, &tc_irqaction);
}
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
new file mode 100644
index 0000000..0bde03f
--- /dev/null
+++ b/drivers/clocksource/tegra20_timer.c
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/time.h>
+#include <asm/smp_twd.h>
+#include <asm/sched_clock.h>
+
+#define RTC_SECONDS 0x08
+#define RTC_SHADOW_SECONDS 0x0c
+#define RTC_MILLISECONDS 0x10
+
+#define TIMERUS_CNTR_1US 0x10
+#define TIMERUS_USEC_CFG 0x14
+#define TIMERUS_CNTR_FREEZE 0x4c
+
+#define TIMER1_BASE 0x0
+#define TIMER2_BASE 0x8
+#define TIMER3_BASE 0x50
+#define TIMER4_BASE 0x58
+
+#define TIMER_PTV 0x0
+#define TIMER_PCR 0x4
+
+static void __iomem *timer_reg_base;
+static void __iomem *rtc_base;
+
+static struct timespec persistent_ts;
+static u64 persistent_ms, last_persistent_ms;
+
+#define timer_writel(value, reg) \
+ __raw_writel(value, timer_reg_base + (reg))
+#define timer_readl(reg) \
+ __raw_readl(timer_reg_base + (reg))
+
+static int tegra_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ u32 reg;
+
+ reg = 0x80000000 | ((cycles > 1) ? (cycles-1) : 0);
+ timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+
+ return 0;
+}
+
+static void tegra_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ u32 reg;
+
+ timer_writel(0, TIMER3_BASE + TIMER_PTV);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ reg = 0xC0000000 | ((1000000/HZ)-1);
+ timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device tegra_clockevent = {
+ .name = "timer0",
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+ .set_next_event = tegra_timer_set_next_event,
+ .set_mode = tegra_timer_set_mode,
+};
+
+static u32 notrace tegra_read_sched_clock(void)
+{
+ return timer_readl(TIMERUS_CNTR_1US);
+}
+
+/*
+ * tegra_rtc_read - Reads the Tegra RTC registers
+ * Care must be taken that this funciton is not called while the
+ * tegra_rtc driver could be executing to avoid race conditions
+ * on the RTC shadow register
+ */
+static u64 tegra_rtc_read_ms(void)
+{
+ u32 ms = readl(rtc_base + RTC_MILLISECONDS);
+ u32 s = readl(rtc_base + RTC_SHADOW_SECONDS);
+ return (u64)s * MSEC_PER_SEC + ms;
+}
+
+/*
+ * tegra_read_persistent_clock - Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer. Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ * Care must be taken that this funciton is not called while the
+ * tegra_rtc driver could be executing to avoid race conditions
+ * on the RTC shadow register
+ */
+static void tegra_read_persistent_clock(struct timespec *ts)
+{
+ u64 delta;
+ struct timespec *tsp = &persistent_ts;
+
+ last_persistent_ms = persistent_ms;
+ persistent_ms = tegra_rtc_read_ms();
+ delta = persistent_ms - last_persistent_ms;
+
+ timespec_add_ns(tsp, delta * NSEC_PER_MSEC);
+ *ts = *tsp;
+}
+
+static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+ timer_writel(1<<30, TIMER3_BASE + TIMER_PCR);
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction tegra_timer_irq = {
+ .name = "timer0",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH,
+ .handler = tegra_timer_interrupt,
+ .dev_id = &tegra_clockevent,
+};
+
+static const struct of_device_id timer_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-timer" },
+ {}
+};
+
+static const struct of_device_id rtc_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-rtc" },
+ {}
+};
+
+static void __init tegra20_init_timer(void)
+{
+ struct device_node *np;
+ struct clk *clk;
+ unsigned long rate;
+ int ret;
+
+ np = of_find_matching_node(NULL, timer_match);
+ if (!np) {
+ pr_err("Failed to find timer DT node\n");
+ BUG();
+ }
+
+ timer_reg_base = of_iomap(np, 0);
+ if (!timer_reg_base) {
+ pr_err("Can't map timer registers\n");
+ BUG();
+ }
+
+ tegra_timer_irq.irq = irq_of_parse_and_map(np, 2);
+ if (tegra_timer_irq.irq <= 0) {
+ pr_err("Failed to map timer IRQ\n");
+ BUG();
+ }
+
+ clk = clk_get_sys("timer", NULL);
+ if (IS_ERR(clk)) {
+ pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
+ rate = 12000000;
+ } else {
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+ }
+
+ of_node_put(np);
+
+ np = of_find_matching_node(NULL, rtc_match);
+ if (!np) {
+ pr_err("Failed to find RTC DT node\n");
+ BUG();
+ }
+
+ rtc_base = of_iomap(np, 0);
+ if (!rtc_base) {
+ pr_err("Can't map RTC registers");
+ BUG();
+ }
+
+ /*
+ * rtc registers are used by read_persistent_clock, keep the rtc clock
+ * enabled
+ */
+ clk = clk_get_sys("rtc-tegra", NULL);
+ if (IS_ERR(clk))
+ pr_warn("Unable to get rtc-tegra clock\n");
+ else
+ clk_prepare_enable(clk);
+
+ of_node_put(np);
+
+ switch (rate) {
+ case 12000000:
+ timer_writel(0x000b, TIMERUS_USEC_CFG);
+ break;
+ case 13000000:
+ timer_writel(0x000c, TIMERUS_USEC_CFG);
+ break;
+ case 19200000:
+ timer_writel(0x045f, TIMERUS_USEC_CFG);
+ break;
+ case 26000000:
+ timer_writel(0x0019, TIMERUS_USEC_CFG);
+ break;
+ default:
+ WARN(1, "Unknown clock rate");
+ }
+
+ setup_sched_clock(tegra_read_sched_clock, 32, 1000000);
+
+ if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
+ "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
+ pr_err("Failed to register clocksource\n");
+ BUG();
+ }
+
+ ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
+ if (ret) {
+ pr_err("Failed to register timer IRQ: %d\n", ret);
+ BUG();
+ }
+
+ tegra_clockevent.cpumask = cpu_all_mask;
+ tegra_clockevent.irq = tegra_timer_irq.irq;
+ clockevents_config_and_register(&tegra_clockevent, 1000000,
+ 0x1, 0x1fffffff);
+#ifdef CONFIG_HAVE_ARM_TWD
+ twd_local_timer_of_register();
+#endif
+ register_persistent_clock(NULL, tegra_read_persistent_clock);
+}
+CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+
+#ifdef CONFIG_PM
+static u32 usec_config;
+
+void tegra_timer_suspend(void)
+{
+ usec_config = timer_readl(TIMERUS_USEC_CFG);
+}
+
+void tegra_timer_resume(void)
+{
+ timer_writel(usec_config, TIMERUS_USEC_CFG);
+}
+#endif
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index a4605fd..47a6730 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -27,8 +27,10 @@
#include <linux/of_address.h>
#include <linux/irq.h>
#include <linux/module.h>
-#include <asm/sched_clock.h>
+#include <asm/sched_clock.h>
+#include <asm/localtimer.h>
+#include <linux/percpu.h>
/*
* Timer block registers.
*/
@@ -49,6 +51,7 @@
#define TIMER1_RELOAD_OFF 0x0018
#define TIMER1_VAL_OFF 0x001c
+#define LCL_TIMER_EVENTS_STATUS 0x0028
/* Global timers are connected to the coherency fabric clock, and the
below divider reduces their incrementing frequency. */
#define TIMER_DIVIDER_SHIFT 5
@@ -57,14 +60,17 @@
/*
* SoC-specific data.
*/
-static void __iomem *timer_base;
-static int timer_irq;
+static void __iomem *timer_base, *local_base;
+static unsigned int timer_clk;
+static bool timer25Mhz = true;
/*
* Number of timer ticks per jiffy.
*/
static u32 ticks_per_jiffy;
+static struct clock_event_device __percpu **percpu_armada_370_xp_evt;
+
static u32 notrace armada_370_xp_read_sched_clock(void)
{
return ~readl(timer_base + TIMER0_VAL_OFF);
@@ -78,24 +84,23 @@ armada_370_xp_clkevt_next_event(unsigned long delta,
struct clock_event_device *dev)
{
u32 u;
-
/*
* Clear clockevent timer interrupt.
*/
- writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
/*
* Setup new clockevent timer value.
*/
- writel(delta, timer_base + TIMER1_VAL_OFF);
+ writel(delta, local_base + TIMER0_VAL_OFF);
/*
* Enable the timer.
*/
- u = readl(timer_base + TIMER_CTRL_OFF);
- u = ((u & ~TIMER1_RELOAD_EN) | TIMER1_EN |
- TIMER1_DIV(TIMER_DIVIDER_SHIFT));
- writel(u, timer_base + TIMER_CTRL_OFF);
+ u = readl(local_base + TIMER_CTRL_OFF);
+ u = ((u & ~TIMER0_RELOAD_EN) | TIMER0_EN |
+ TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ writel(u, local_base + TIMER_CTRL_OFF);
return 0;
}
@@ -107,37 +112,38 @@ armada_370_xp_clkevt_mode(enum clock_event_mode mode,
u32 u;
if (mode == CLOCK_EVT_MODE_PERIODIC) {
+
/*
* Setup timer to fire at 1/HZ intervals.
*/
- writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
- writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+ writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF);
+ writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF);
/*
* Enable timer.
*/
- u = readl(timer_base + TIMER_CTRL_OFF);
- writel((u | TIMER1_EN | TIMER1_RELOAD_EN |
- TIMER1_DIV(TIMER_DIVIDER_SHIFT)),
- timer_base + TIMER_CTRL_OFF);
+ u = readl(local_base + TIMER_CTRL_OFF);
+
+ writel((u | TIMER0_EN | TIMER0_RELOAD_EN |
+ TIMER0_DIV(TIMER_DIVIDER_SHIFT)),
+ local_base + TIMER_CTRL_OFF);
} else {
/*
* Disable timer.
*/
- u = readl(timer_base + TIMER_CTRL_OFF);
- writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+ u = readl(local_base + TIMER_CTRL_OFF);
+ writel(u & ~TIMER0_EN, local_base + TIMER_CTRL_OFF);
/*
* ACK pending timer interrupt.
*/
- writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
-
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
}
}
static struct clock_event_device armada_370_xp_clkevt = {
- .name = "armada_370_xp_tick",
+ .name = "armada_370_xp_per_cpu_tick",
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.shift = 32,
.rating = 300,
@@ -150,32 +156,78 @@ static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id)
/*
* ACK timer interrupt and call event handler.
*/
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
- writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
- armada_370_xp_clkevt.event_handler(&armada_370_xp_clkevt);
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
-static struct irqaction armada_370_xp_timer_irq = {
- .name = "armada_370_xp_tick",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = armada_370_xp_timer_interrupt
+/*
+ * Setup the local clock events for a CPU.
+ */
+static int __cpuinit armada_370_xp_timer_setup(struct clock_event_device *evt)
+{
+ u32 u;
+ int cpu = smp_processor_id();
+
+ /* Use existing clock_event for cpu 0 */
+ if (!smp_processor_id())
+ return 0;
+
+ u = readl(local_base + TIMER_CTRL_OFF);
+ if (timer25Mhz)
+ writel(u | TIMER0_25MHZ, local_base + TIMER_CTRL_OFF);
+ else
+ writel(u & ~TIMER0_25MHZ, local_base + TIMER_CTRL_OFF);
+
+ evt->name = armada_370_xp_clkevt.name;
+ evt->irq = armada_370_xp_clkevt.irq;
+ evt->features = armada_370_xp_clkevt.features;
+ evt->shift = armada_370_xp_clkevt.shift;
+ evt->rating = armada_370_xp_clkevt.rating,
+ evt->set_next_event = armada_370_xp_clkevt_next_event,
+ evt->set_mode = armada_370_xp_clkevt_mode,
+ evt->cpumask = cpumask_of(cpu);
+
+ *__this_cpu_ptr(percpu_armada_370_xp_evt) = evt;
+
+ clockevents_config_and_register(evt, timer_clk, 1, 0xfffffffe);
+ enable_percpu_irq(evt->irq, 0);
+
+ return 0;
+}
+
+static void armada_370_xp_timer_stop(struct clock_event_device *evt)
+{
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
+}
+
+static struct local_timer_ops armada_370_xp_local_timer_ops __cpuinitdata = {
+ .setup = armada_370_xp_timer_setup,
+ .stop = armada_370_xp_timer_stop,
};
void __init armada_370_xp_timer_init(void)
{
u32 u;
struct device_node *np;
- unsigned int timer_clk;
+ int res;
+
np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
timer_base = of_iomap(np, 0);
WARN_ON(!timer_base);
+ local_base = of_iomap(np, 1);
if (of_find_property(np, "marvell,timer-25Mhz", NULL)) {
/* The fixed 25MHz timer is available so let's use it */
+ u = readl(local_base + TIMER_CTRL_OFF);
+ writel(u | TIMER0_25MHZ,
+ local_base + TIMER_CTRL_OFF);
u = readl(timer_base + TIMER_CTRL_OFF);
- writel(u | TIMER0_25MHZ | TIMER1_25MHZ,
+ writel(u | TIMER0_25MHZ,
timer_base + TIMER_CTRL_OFF);
timer_clk = 25000000;
} else {
@@ -183,15 +235,23 @@ void __init armada_370_xp_timer_init(void)
struct clk *clk = of_clk_get(np, 0);
WARN_ON(IS_ERR(clk));
rate = clk_get_rate(clk);
+ u = readl(local_base + TIMER_CTRL_OFF);
+ writel(u & ~(TIMER0_25MHZ),
+ local_base + TIMER_CTRL_OFF);
+
u = readl(timer_base + TIMER_CTRL_OFF);
- writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
+ writel(u & ~(TIMER0_25MHZ),
timer_base + TIMER_CTRL_OFF);
+
timer_clk = rate / TIMER_DIVIDER;
+ timer25Mhz = false;
}
- /* We use timer 0 as clocksource, and timer 1 for
- clockevents */
- timer_irq = irq_of_parse_and_map(np, 1);
+ /*
+ * We use timer 0 as clocksource, and private(local) timer 0
+ * for clockevents
+ */
+ armada_370_xp_clkevt.irq = irq_of_parse_and_map(np, 4);
ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
@@ -216,12 +276,26 @@ void __init armada_370_xp_timer_init(void)
"armada_370_xp_clocksource",
timer_clk, 300, 32, clocksource_mmio_readl_down);
- /*
- * Setup clockevent timer (interrupt-driven).
- */
- setup_irq(timer_irq, &armada_370_xp_timer_irq);
+ /* Register the clockevent on the private timer of CPU 0 */
armada_370_xp_clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&armada_370_xp_clkevt,
timer_clk, 1, 0xfffffffe);
-}
+ percpu_armada_370_xp_evt = alloc_percpu(struct clock_event_device *);
+
+
+ /*
+ * Setup clockevent timer (interrupt-driven).
+ */
+ *__this_cpu_ptr(percpu_armada_370_xp_evt) = &armada_370_xp_clkevt;
+ res = request_percpu_irq(armada_370_xp_clkevt.irq,
+ armada_370_xp_timer_interrupt,
+ armada_370_xp_clkevt.name,
+ percpu_armada_370_xp_evt);
+ if (!res) {
+ enable_percpu_irq(armada_370_xp_clkevt.irq, 0);
+#ifdef CONFIG_LOCAL_TIMERS
+ local_timer_register(&armada_370_xp_local_timer_ops);
+#endif
+ }
+}
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
new file mode 100644
index 0000000..8efc86b
--- /dev/null
+++ b/drivers/clocksource/vt8500_timer.c
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-vt8500/timer.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * This file is copied and modified from the original timer.c provided by
+ * Alexey Charkov. Minor changes have been made for Device Tree Support.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <asm/mach/time.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define VT8500_TIMER_OFFSET 0x0100
+#define VT8500_TIMER_HZ 3000000
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0010
+#define TIMER_STATUS_VAL 0x0014
+#define TIMER_IER_VAL 0x001c /* interrupt enable */
+#define TIMER_CTRL_VAL 0x0020
+#define TIMER_AS_VAL 0x0024 /* access status */
+#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
+#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
+#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+static void __iomem *regbase;
+
+static cycle_t vt8500_timer_read(struct clocksource *cs)
+{
+ int loops = msecs_to_loops(10);
+ writel(3, regbase + TIMER_CTRL_VAL);
+ while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
+ && --loops)
+ cpu_relax();
+ return readl(regbase + TIMER_COUNT_VAL);
+}
+
+static struct clocksource clocksource = {
+ .name = "vt8500_timer",
+ .rating = 200,
+ .read = vt8500_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int vt8500_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ int loops = msecs_to_loops(10);
+ cycle_t alarm = clocksource.read(&clocksource) + cycles;
+ while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
+ && --loops)
+ cpu_relax();
+ writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+
+ if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
+ return -ETIME;
+
+ writel(1, regbase + TIMER_IER_VAL);
+
+ return 0;
+}
+
+static void vt8500_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(readl(regbase + TIMER_CTRL_VAL) | 1,
+ regbase + TIMER_CTRL_VAL);
+ writel(0, regbase + TIMER_IER_VAL);
+ break;
+ }
+}
+
+static struct clock_event_device clockevent = {
+ .name = "vt8500_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = vt8500_timer_set_next_event,
+ .set_mode = vt8500_timer_set_mode,
+};
+
+static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq = {
+ .name = "vt8500_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = vt8500_timer_interrupt,
+ .dev_id = &clockevent,
+};
+
+static struct of_device_id vt8500_timer_ids[] = {
+ { .compatible = "via,vt8500-timer" },
+ { }
+};
+
+static void __init vt8500_timer_init(void)
+{
+ struct device_node *np;
+ int timer_irq;
+
+ np = of_find_matching_node(NULL, vt8500_timer_ids);
+ if (!np) {
+ pr_err("%s: Timer description missing from Device Tree\n",
+ __func__);
+ return;
+ }
+ regbase = of_iomap(np, 0);
+ if (!regbase) {
+ pr_err("%s: Missing iobase description in Device Tree\n",
+ __func__);
+ of_node_put(np);
+ return;
+ }
+ timer_irq = irq_of_parse_and_map(np, 0);
+ if (!timer_irq) {
+ pr_err("%s: Missing irq description in Device Tree\n",
+ __func__);
+ of_node_put(np);
+ return;
+ }
+
+ writel(1, regbase + TIMER_CTRL_VAL);
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ writel(~0, regbase + TIMER_MATCH_VAL);
+
+ if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+ pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
+ __func__, clocksource.name);
+
+ clockevent.cpumask = cpumask_of(0);
+
+ if (setup_irq(timer_irq, &irq))
+ pr_err("%s: setup_irq failed for %s\n", __func__,
+ clockevent.name);
+ clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
+ 4, 0xf0000000);
+}
+
+CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init)
OpenPOWER on IntegriCloud