diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/mxs_timer.c | 304 |
2 files changed, 305 insertions, 0 deletions
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 5e2176f..00c0862 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o obj-$(CONFIG_ARCH_MARCO) += timer-marco.o +obj-$(CONFIG_ARCH_MXS) += mxs_timer.o obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c new file mode 100644 index 0000000..02af420 --- /dev/null +++ b/drivers/clocksource/mxs_timer.c @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2000-2001 Deep Blue Solutions + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/stmp_device.h> + +#include <asm/mach/time.h> +#include <asm/sched_clock.h> + +/* + * There are 2 versions of the timrot on Freescale MXS-based SoCs. + * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 + * extends the counter to 32 bits. + * + * The implementation uses two timers, one for clock_event and + * another for clocksource. MX28 uses timrot 0 and 1, while MX23 + * uses 0 and 2. + */ + +#define MX23_TIMROT_VERSION_OFFSET 0x0a0 +#define MX28_TIMROT_VERSION_OFFSET 0x120 +#define BP_TIMROT_MAJOR_VERSION 24 +#define BV_TIMROT_VERSION_1 0x01 +#define BV_TIMROT_VERSION_2 0x02 +#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) + +/* + * There are 4 registers for each timrotv2 instance, and 2 registers + * for each timrotv1. So address step 0x40 in macros below strides + * one instance of timrotv2 while two instances of timrotv1. + * + * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 + * on MX28 while timrot2 on MX23. + */ +/* common between v1 and v2 */ +#define HW_TIMROT_ROTCTRL 0x00 +#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) +/* v1 only */ +#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) +/* v2 only */ +#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) +#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) + +#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) +#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) +#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) +#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) +#define BP_TIMROT_TIMCTRLn_SELECT 0 +#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 +#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb +#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf + +static struct clock_event_device mxs_clockevent_device; +static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *mxs_timrot_base; +static u32 timrot_major_version; + +static inline void timrot_irq_disable(void) +{ + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); +} + +static inline void timrot_irq_enable(void) +{ + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET); +} + +static void timrot_irq_acknowledge(void) +{ + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); +} + +static cycle_t timrotv1_get_cycles(struct clocksource *cs) +{ + return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) + & 0xffff0000) >> 16); +} + +static int timrotv1_set_next_event(unsigned long evt, + struct clock_event_device *dev) +{ + /* timrot decrements the count */ + __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); + + return 0; +} + +static int timrotv2_set_next_event(unsigned long evt, + struct clock_event_device *dev) +{ + /* timrot decrements the count */ + __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); + + return 0; +} + +static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + timrot_irq_acknowledge(); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mxs_timer_irq = { + .name = "MXS Timer Tick", + .dev_id = &mxs_clockevent_device, + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = mxs_timer_interrupt, +}; + +#ifdef DEBUG +static const char *clock_event_mode_label[] const = { + [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", + [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", + [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", + [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" +}; +#endif /* DEBUG */ + +static void mxs_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + /* Disable interrupt in timer module */ + timrot_irq_disable(); + + if (mode != mxs_clockevent_mode) { + /* Set event time into the furthest future */ + if (timrot_is_v1()) + __raw_writel(0xffff, + mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); + else + __raw_writel(0xffffffff, + mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); + + /* Clear pending interrupt */ + timrot_irq_acknowledge(); + } + +#ifdef DEBUG + pr_info("%s: changing mode from %s to %s\n", __func__, + clock_event_mode_label[mxs_clockevent_mode], + clock_event_mode_label[mode]); +#endif /* DEBUG */ + + /* Remember timer mode */ + mxs_clockevent_mode = mode; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_err("%s: Periodic mode is not implemented\n", __func__); + break; + case CLOCK_EVT_MODE_ONESHOT: + timrot_irq_enable(); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +static struct clock_event_device mxs_clockevent_device = { + .name = "mxs_timrot", + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_mode = mxs_set_mode, + .set_next_event = timrotv2_set_next_event, + .rating = 200, +}; + +static int __init mxs_clockevent_init(struct clk *timer_clk) +{ + if (timrot_is_v1()) + mxs_clockevent_device.set_next_event = timrotv1_set_next_event; + mxs_clockevent_device.cpumask = cpumask_of(0); + clockevents_config_and_register(&mxs_clockevent_device, + clk_get_rate(timer_clk), + timrot_is_v1() ? 0xf : 0x2, + timrot_is_v1() ? 0xfffe : 0xfffffffe); + + return 0; +} + +static struct clocksource clocksource_mxs = { + .name = "mxs_timer", + .rating = 200, + .read = timrotv1_get_cycles, + .mask = CLOCKSOURCE_MASK(16), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static u32 notrace mxs_read_sched_clock_v2(void) +{ + return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); +} + +static int __init mxs_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + if (timrot_is_v1()) + clocksource_register_hz(&clocksource_mxs, c); + else { + clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), + "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); + setup_sched_clock(mxs_read_sched_clock_v2, 32, c); + } + + return 0; +} + +static void __init mxs_timer_init(struct device_node *np) +{ + struct clk *timer_clk; + int irq; + + mxs_timrot_base = of_iomap(np, 0); + WARN_ON(!mxs_timrot_base); + + timer_clk = of_clk_get(np, 0); + if (IS_ERR(timer_clk)) { + pr_err("%s: failed to get clk\n", __func__); + return; + } + + clk_prepare_enable(timer_clk); + + /* + * Initialize timers to a known state + */ + stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); + + /* get timrot version */ + timrot_major_version = __raw_readl(mxs_timrot_base + + (of_device_is_compatible(np, "fsl,imx23-timrot") ? + MX23_TIMROT_VERSION_OFFSET : + MX28_TIMROT_VERSION_OFFSET)); + timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; + + /* one for clock_event */ + __raw_writel((timrot_is_v1() ? + BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : + BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + + /* another for clocksource */ + __raw_writel((timrot_is_v1() ? + BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : + BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | + BM_TIMROT_TIMCTRLn_RELOAD, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); + + /* set clocksource timer fixed count to the maximum */ + if (timrot_is_v1()) + __raw_writel(0xffff, + mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); + else + __raw_writel(0xffffffff, + mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); + + /* init and register the timer to the framework */ + mxs_clocksource_init(timer_clk); + mxs_clockevent_init(timer_clk); + + /* Make irqs happen */ + irq = irq_of_parse_and_map(np, 0); + setup_irq(irq, &mxs_timer_irq); +} +CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init); |
