diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/bcm_kona_timer.c | 15 | ||||
| -rw-r--r-- | drivers/clocksource/cadence_ttc_timer.c | 23 | ||||
| -rw-r--r-- | drivers/clocksource/nomadik-mtu.c | 60 |
3 files changed, 70 insertions, 28 deletions
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c index 350f493..ba3d859 100644 --- a/drivers/clocksource/bcm_kona_timer.c +++ b/drivers/clocksource/bcm_kona_timer.c @@ -103,16 +103,10 @@ static const struct of_device_id bcm_timer_ids[] __initconst = { {}, }; -static void __init kona_timers_init(void) +static void __init kona_timers_init(struct device_node *node) { - struct device_node *node; u32 freq; - node = of_find_matching_node(NULL, bcm_timer_ids); - - if (!node) - panic("No timer"); - if (!of_property_read_u32(node, "clock-frequency", &freq)) arch_timer_rate = freq; else @@ -199,13 +193,12 @@ static struct irqaction kona_timer_irq = { .handler = kona_timer_interrupt, }; -static void __init kona_timer_init(void) +static void __init kona_timer_init(struct device_node *node) { - kona_timers_init(); + kona_timers_init(node); kona_timer_clockevents_init(); setup_irq(timers.tmr_irq, &kona_timer_irq); kona_timer_set_next_event((arch_timer_rate / HZ), NULL); } -CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", - kona_timer_init); +CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init); diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c index 685bc60..4cbe28c 100644 --- a/drivers/clocksource/cadence_ttc_timer.c +++ b/drivers/clocksource/cadence_ttc_timer.c @@ -51,6 +51,8 @@ #define TTC_CNT_CNTRL_DISABLE_MASK 0x1 +#define TTC_CLK_CNTRL_CSRC_MASK (1 << 5) /* clock source */ + /* * Setup the timers to use pre-scaling, using a fixed value for now that will * work across most input frequency, but it may need to be more dynamic @@ -396,8 +398,9 @@ static void __init ttc_timer_init(struct device_node *timer) { unsigned int irq; void __iomem *timer_baseaddr; - struct clk *clk; + struct clk *clk_cs, *clk_ce; static int initialized; + int clksel; if (initialized) return; @@ -421,14 +424,24 @@ static void __init ttc_timer_init(struct device_node *timer) BUG(); } - clk = of_clk_get_by_name(timer, "cpu_1x"); - if (IS_ERR(clk)) { + clksel = __raw_readl(timer_baseaddr + TTC_CLK_CNTRL_OFFSET); + clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK); + clk_cs = of_clk_get(timer, clksel); + if (IS_ERR(clk_cs)) { + pr_err("ERROR: timer input clock not found\n"); + BUG(); + } + + clksel = __raw_readl(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET); + clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK); + clk_ce = of_clk_get(timer, clksel); + if (IS_ERR(clk_ce)) { pr_err("ERROR: timer input clock not found\n"); BUG(); } - ttc_setup_clocksource(clk, timer_baseaddr); - ttc_setup_clockevent(clk, timer_baseaddr + 4, irq); + ttc_setup_clocksource(clk_cs, timer_baseaddr); + ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq); pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq); } diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index e405531..b9415b6 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -13,6 +13,9 @@ #include <linux/io.h> #include <linux/clockchips.h> #include <linux/clocksource.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <linux/clk.h> #include <linux/jiffies.h> #include <linux/delay.h> @@ -188,22 +191,15 @@ static struct irqaction nmdk_timer_irq = { .dev_id = &nmdk_clkevt, }; -void __init nmdk_timer_init(void __iomem *base, int irq) +static void __init __nmdk_timer_init(void __iomem *base, int irq, + struct clk *pclk, struct clk *clk) { unsigned long rate; - struct clk *clk0, *pclk0; mtu_base = base; - pclk0 = clk_get_sys("mtu0", "apb_pclk"); - BUG_ON(IS_ERR(pclk0)); - BUG_ON(clk_prepare(pclk0) < 0); - BUG_ON(clk_enable(pclk0) < 0); - - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - BUG_ON(clk_prepare(clk0) < 0); - BUG_ON(clk_enable(clk0) < 0); + BUG_ON(clk_prepare_enable(pclk)); + BUG_ON(clk_prepare_enable(clk)); /* * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz @@ -213,7 +209,7 @@ void __init nmdk_timer_init(void __iomem *base, int irq) * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer * with 16 gives too low timer resolution. */ - rate = clk_get_rate(clk0); + rate = clk_get_rate(clk); if (rate > 32000000) { rate /= 16; clk_prescale = MTU_CRn_PRESCALE_16; @@ -247,3 +243,43 @@ void __init nmdk_timer_init(void __iomem *base, int irq) mtu_delay_timer.freq = rate; register_current_timer_delay(&mtu_delay_timer); } + +void __init nmdk_timer_init(void __iomem *base, int irq) +{ + struct clk *clk0, *pclk0; + + pclk0 = clk_get_sys("mtu0", "apb_pclk"); + BUG_ON(IS_ERR(pclk0)); + clk0 = clk_get_sys("mtu0", NULL); + BUG_ON(IS_ERR(clk0)); + + __nmdk_timer_init(base, irq, pclk0, clk0); +} + +static void __init nmdk_timer_of_init(struct device_node *node) +{ + struct clk *pclk; + struct clk *clk; + void __iomem *base; + int irq; + + base = of_iomap(node, 0); + if (!base) + panic("Can't remap registers"); + + pclk = of_clk_get_by_name(node, "apb_pclk"); + if (IS_ERR(pclk)) + panic("could not get apb_pclk"); + + clk = of_clk_get_by_name(node, "timclk"); + if (IS_ERR(clk)) + panic("could not get timclk"); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("Can't parse IRQ"); + + __nmdk_timer_init(base, irq, pclk, clk); +} +CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu", + nmdk_timer_of_init); |
