diff options
Diffstat (limited to 'drivers/clk/sunxi-ng')
| -rw-r--r-- | drivers/clk/sunxi-ng/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/clk/sunxi-ng/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 207 | ||||
| -rw-r--r-- | drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 19 | ||||
| -rw-r--r-- | drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 72 |
5 files changed, 293 insertions, 11 deletions
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index 79dfd29..826674d 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -16,6 +16,11 @@ config SUN50I_H6_CCU default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST +config SUN50I_H6_R_CCU + bool "Support for the Allwinner H6 PRCM CCU" + default ARM64 && ARCH_SUNXI + depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST + config SUN4I_A10_CCU bool "Support for the Allwinner A10/A20 CCU" default MACH_SUN4I diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 128a40e..acaa14c 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -23,6 +23,7 @@ lib-$(CONFIG_SUNXI_CCU) += ccu_mp.o # SoC support obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o +obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c new file mode 100644 index 0000000..27554ea --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> + */ + +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_nm.h" + +#include "ccu-sun50i-h6-r.h" + +/* + * Information about AR100 and AHB/APB clocks in R_CCU are gathered from + * clock definitions in the BSP source code. + */ + +static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k", + "pll-periph0", "iosc" }; +static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = { + { .index = 2, .shift = 0, .width = 5 }, +}; + +static struct ccu_div ar100_clk = { + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + + .mux = { + .shift = 24, + .width = 2, + + .var_predivs = ar100_r_apb2_predivs, + .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), + }, + + .common = { + .reg = 0x000, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("ar100", + ar100_r_apb2_parents, + &ccu_div_ops, + 0), + }, +}; + +static CLK_FIXED_FACTOR(r_ahb_clk, "r-ahb", "ar100", 1, 1, 0); + +static struct ccu_div r_apb1_clk = { + .div = _SUNXI_CCU_DIV(0, 2), + + .common = { + .reg = 0x00c, + .hw.init = CLK_HW_INIT("r-apb1", + "r-ahb", + &ccu_div_ops, + 0), + }, +}; + +static struct ccu_div r_apb2_clk = { + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + + .mux = { + .shift = 24, + .width = 2, + + .var_predivs = ar100_r_apb2_predivs, + .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), + }, + + .common = { + .reg = 0x010, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("r-apb2", + ar100_r_apb2_parents, + &ccu_div_ops, + 0), + }, +}; + +/* + * Information about the gate/resets are gathered from the clock header file + * in the BSP source code, although most of them are unused. The existence + * of the hardware block is verified with "3.1 Memory Mapping" chapter in + * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified + * with "3.3.2.1 System Bus Tree" chapter inthe same document. + */ +static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1", + 0x11c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb1_twd_clk, "r-apb1-twd", "r-apb1", + 0x12c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb1_pwm_clk, "r-apb1-pwm", "r-apb1", + 0x13c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2", + 0x18c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2", + 0x19c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1", + 0x1cc, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1", + 0x1cc, BIT(0), 0); + +/* Information of IR(RX) mod clock is gathered from BSP source code */ +static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", + r_mod0_default_parents, 0x1c0, + 0, 5, /* M */ + 8, 2, /* P */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +/* + * BSP didn't use the 1-wire function at all now, and the information about + * this mod clock is guessed from the IR mod clock above. The existence of + * this mod clock is proven by BSP clock header, and the dividers are verified + * by contents in the 1-wire related chapter of the User Manual. + */ + +static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1", + r_mod0_default_parents, 0x1e0, + 0, 5, /* M */ + 8, 2, /* P */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static struct ccu_common *sun50i_h6_r_ccu_clks[] = { + &ar100_clk.common, + &r_apb1_clk.common, + &r_apb2_clk.common, + &r_apb1_timer_clk.common, + &r_apb1_twd_clk.common, + &r_apb1_pwm_clk.common, + &r_apb2_uart_clk.common, + &r_apb2_i2c_clk.common, + &r_apb1_ir_clk.common, + &r_apb1_w1_clk.common, + &ir_clk.common, + &w1_clk.common, +}; + +static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { + .hws = { + [CLK_AR100] = &ar100_clk.common.hw, + [CLK_R_AHB] = &r_ahb_clk.hw, + [CLK_R_APB1] = &r_apb1_clk.common.hw, + [CLK_R_APB2] = &r_apb2_clk.common.hw, + [CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw, + [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, + [CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw, + [CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw, + [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, + [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, + [CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw, + [CLK_IR] = &ir_clk.common.hw, + [CLK_W1] = &w1_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { + [RST_R_APB1_TIMER] = { 0x11c, BIT(16) }, + [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, + [RST_R_APB1_PWM] = { 0x13c, BIT(16) }, + [RST_R_APB2_UART] = { 0x18c, BIT(16) }, + [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, + [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, + [RST_R_APB1_W1] = { 0x1ec, BIT(16) }, +}; + +static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = { + .ccu_clks = sun50i_h6_r_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks), + + .hw_clks = &sun50i_h6_r_hw_clks, + + .resets = sun50i_h6_r_ccu_resets, + .num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets), +}; + +static void __init sunxi_r_ccu_init(struct device_node *node, + const struct sunxi_ccu_desc *desc) +{ + void __iomem *reg; + + reg = of_io_request_and_map(node, 0, of_node_full_name(node)); + if (IS_ERR(reg)) { + pr_err("%pOF: Could not map the clock registers\n", node); + return; + } + + sunxi_ccu_probe(node, reg, desc); +} + +static void __init sun50i_h6_r_ccu_setup(struct device_node *node) +{ + sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc); +} +CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu", + sun50i_h6_r_ccu_setup); diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h new file mode 100644 index 0000000..782117d --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz> + */ + +#ifndef _CCU_SUN50I_H6_R_H +#define _CCU_SUN50I_H6_R_H + +#include <dt-bindings/clock/sun50i-h6-r-ccu.h> +#include <dt-bindings/reset/sun50i-h6-r-ccu.h> + +/* AHB/APB bus clocks are not exported except APB1 for R_PIO */ +#define CLK_R_AHB 1 + +#define CLK_R_APB2 3 + +#define CLK_NUMBER (CLK_W1 + 1) + +#endif /* _CCU_SUN50I_H6_R_H */ diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c index 933f2e6..65ba645 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c @@ -12,7 +12,8 @@ */ #include <linux/clk-provider.h> -#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> #include "ccu_common.h" #include "ccu_reset.h" @@ -1250,17 +1251,45 @@ static struct ccu_mux_nb sun8i_r40_cpu_nb = { .bypass_index = 1, /* index of 24 MHz oscillator */ }; -static void __init sun8i_r40_ccu_setup(struct device_node *node) +/* + * Add a regmap for the GMAC driver (dwmac-sun8i) to access the + * GMAC configuration register. + * Only this register is allowed to be written, in order to + * prevent overriding critical clock configuration. + */ + +#define SUN8I_R40_GMAC_CFG_REG 0x164 +static bool sun8i_r40_ccu_regmap_accessible_reg(struct device *dev, + unsigned int reg) +{ + if (reg == SUN8I_R40_GMAC_CFG_REG) + return true; + return false; +} + +static struct regmap_config sun8i_r40_ccu_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0x320, /* PLL_LOCK_CTRL_REG */ + + /* other devices have no business accessing other registers */ + .readable_reg = sun8i_r40_ccu_regmap_accessible_reg, + .writeable_reg = sun8i_r40_ccu_regmap_accessible_reg, +}; + +static int sun8i_r40_ccu_probe(struct platform_device *pdev) { + struct resource *res; + struct regmap *regmap; void __iomem *reg; u32 val; + int ret; - reg = of_io_request_and_map(node, 0, of_node_full_name(node)); - if (IS_ERR(reg)) { - pr_err("%s: Could not map the clock registers\n", - of_node_full_name(node)); - return; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(reg)) + return PTR_ERR(reg); /* Force the PLL-Audio-1x divider to 4 */ val = readl(reg + SUN8I_R40_PLL_AUDIO_REG); @@ -1277,7 +1306,14 @@ static void __init sun8i_r40_ccu_setup(struct device_node *node) val &= ~GENMASK(25, 20); writel(val, reg + SUN8I_R40_USB_CLK_REG); - sunxi_ccu_probe(node, reg, &sun8i_r40_ccu_desc); + regmap = devm_regmap_init_mmio(&pdev->dev, reg, + &sun8i_r40_ccu_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun8i_r40_ccu_desc); + if (ret) + return ret; /* Gate then ungate PLL CPU after any rate changes */ ccu_pll_notifier_register(&sun8i_r40_pll_cpu_nb); @@ -1285,6 +1321,20 @@ static void __init sun8i_r40_ccu_setup(struct device_node *node) /* Reparent CPU during PLL CPU rate changes */ ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk, &sun8i_r40_cpu_nb); + + return 0; } -CLK_OF_DECLARE(sun8i_r40_ccu, "allwinner,sun8i-r40-ccu", - sun8i_r40_ccu_setup); + +static const struct of_device_id sun8i_r40_ccu_ids[] = { + { .compatible = "allwinner,sun8i-r40-ccu" }, + { } +}; + +static struct platform_driver sun8i_r40_ccu_driver = { + .probe = sun8i_r40_ccu_probe, + .driver = { + .name = "sun8i-r40-ccu", + .of_match_table = sun8i_r40_ccu_ids, + }, +}; +builtin_platform_driver(sun8i_r40_ccu_driver); |
