diff options
Diffstat (limited to 'drivers/char')
| -rw-r--r-- | drivers/char/esp.c | 591 |
1 files changed, 283 insertions, 308 deletions
diff --git a/drivers/char/esp.c b/drivers/char/esp.c index 996d323..9525eac 100644 --- a/drivers/char/esp.c +++ b/drivers/char/esp.c @@ -8,7 +8,7 @@ * Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now * much more extensible to support other serial cards based on the * 16450/16550A UART's. Added support for the AST FourPort and the - * Accent Async board. + * Accent Async board. * * set_serial_info fixed to set the flags, custom divisor, and uart * type fields. Fix suggested by Michael K. Johnson 12/12/92. @@ -61,11 +61,11 @@ #include <linux/bitops.h> #include <asm/system.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/dma.h> #include <linux/slab.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/hayesesp.h> @@ -127,8 +127,10 @@ static struct tty_driver *esp_driver; #undef SERIAL_DEBUG_FLOW #if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) -#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ - tty->name, (info->flags), serial_driver.refcount,info->count,tty->count,s) +#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ + tty->name, info->flags, \ + serial_driver.refcount, \ + info->count, tty->count, s) #else #define DBG_CNT(s) #endif @@ -189,7 +191,7 @@ static inline void serial_out(struct esp_struct *info, int offset, */ static void rs_stop(struct tty_struct *tty) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_stop")) @@ -206,12 +208,12 @@ static void rs_stop(struct tty_struct *tty) static void rs_start(struct tty_struct *tty) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; - + if (serial_paranoia_check(info, tty->name, "rs_start")) return; - + spin_lock_irqsave(&info->lock, flags); if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { info->IER |= UART_IER_THRI; @@ -233,7 +235,7 @@ static void rs_start(struct tty_struct *tty) * rs_interrupt() should try to keep the interrupt handler as fast as * possible. After you are done making modifications, it is not a bad * idea to do: - * + * * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c * * and look at the resulting assemble code in serial.s. @@ -290,7 +292,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes) } status_mask = (info->read_status_mask >> 2) & 0x07; - + for (i = 0; i < num_bytes - 1; i += 2) { *((unsigned short *)(pio_buf->data + i)) = inw(info->port + UART_ESI_RX); @@ -325,8 +327,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes) flag = TTY_BREAK; if (info->flags & ASYNC_SAK) do_SAK(tty); - } - else if (err_buf->data[i] & 0x02) + } else if (err_buf->data[i] & 0x02) flag = TTY_FRAME; else if (err_buf->data[i] & 0x01) flag = TTY_PARITY; @@ -341,23 +342,29 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes) release_pio_buffer(err_buf); } -static inline void receive_chars_dma(struct esp_struct *info, int num_bytes) +static void program_isa_dma(int dma, int dir, unsigned long addr, int len) { unsigned long flags; + + flags = claim_dma_lock(); + disable_dma(dma); + clear_dma_ff(dma); + set_dma_mode(dma, dir); + set_dma_addr(dma, addr); + set_dma_count(dma, len); + enable_dma(dma); + release_dma_lock(flags); +} + +static void receive_chars_dma(struct esp_struct *info, int num_bytes) +{ info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; dma_bytes = num_bytes; info->stat_flags |= ESP_STAT_DMA_RX; - - flags=claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - set_dma_mode(dma, DMA_MODE_READ); - set_dma_addr(dma, isa_virt_to_bus(dma_buffer)); - set_dma_count(dma, dma_bytes); - enable_dma(dma); - release_dma_lock(flags); - - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX); + + program_isa_dma(dma, DMA_MODE_READ, isa_virt_to_bus(dma_buffer), + dma_bytes); + serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX); } static inline void receive_chars_dma_done(struct esp_struct *info, @@ -366,22 +373,22 @@ static inline void receive_chars_dma_done(struct esp_struct *info, struct tty_struct *tty = info->tty; int num_bytes; unsigned long flags; - - flags=claim_dma_lock(); + + flags = claim_dma_lock(); disable_dma(dma); clear_dma_ff(dma); info->stat_flags &= ~ESP_STAT_DMA_RX; num_bytes = dma_bytes - get_dma_residue(dma); release_dma_lock(flags); - + info->icount.rx += num_bytes; if (num_bytes > 0) { tty_insert_flip_string(tty, dma_buffer, num_bytes - 1); status &= (0x1c & info->read_status_mask); - + /* Is the status significant or do we throw the last byte ? */ if (!(status & info->ignore_status_mask)) { int statflag = 0; @@ -393,13 +400,13 @@ static inline void receive_chars_dma_done(struct esp_struct *info, do_SAK(tty); } else if (status & 0x08) { statflag = TTY_FRAME; - (info->icount.frame)++; - } - else if (status & 0x04) { + info->icount.frame++; + } else if (status & 0x04) { statflag = TTY_PARITY; - (info->icount.parity)++; + info->icount.parity++; } - tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], statflag); + tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], + statflag); } tty_schedule_flip(tty); } @@ -484,8 +491,6 @@ static inline void transmit_chars_pio(struct esp_struct *info, /* Caller must hold info->lock */ static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes) { - unsigned long flags; - dma_bytes = num_bytes; if (info->xmit_tail + dma_bytes <= ESP_XMIT_SIZE) { @@ -517,26 +522,18 @@ static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes) } info->stat_flags |= ESP_STAT_DMA_TX; - - flags=claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - set_dma_mode(dma, DMA_MODE_WRITE); - set_dma_addr(dma, isa_virt_to_bus(dma_buffer)); - set_dma_count(dma, dma_bytes); - enable_dma(dma); - release_dma_lock(flags); - - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); + + program_isa_dma(dma, DMA_MODE_WRITE, isa_virt_to_bus(dma_buffer), + dma_bytes); + serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); } static inline void transmit_chars_dma_done(struct esp_struct *info) { int num_bytes; unsigned long flags; - - flags=claim_dma_lock(); + flags = claim_dma_lock(); disable_dma(dma); clear_dma_ff(dma); @@ -547,27 +544,21 @@ static inline void transmit_chars_dma_done(struct esp_struct *info) if (dma_bytes != num_bytes) { dma_bytes -= num_bytes; memmove(dma_buffer, dma_buffer + num_bytes, dma_bytes); - - flags=claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - set_dma_mode(dma, DMA_MODE_WRITE); - set_dma_addr(dma, isa_virt_to_bus(dma_buffer)); - set_dma_count(dma, dma_bytes); - enable_dma(dma); - release_dma_lock(flags); - - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); + + program_isa_dma(dma, DMA_MODE_WRITE, + isa_virt_to_bus(dma_buffer), dma_bytes); + + serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); } else { dma_bytes = 0; info->stat_flags &= ~ESP_STAT_DMA_TX; } } -static inline void check_modem_status(struct esp_struct *info) +static void check_modem_status(struct esp_struct *info) { int status; - + serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); status = serial_in(info, UART_ESI_STAT2); @@ -588,7 +579,7 @@ static inline void check_modem_status(struct esp_struct *info) #if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) printk("ttys%d CD now %s...", info->line, (status & UART_MSR_DCD) ? "on" : "off"); -#endif +#endif if (status & UART_MSR_DCD) wake_up_interruptible(&info->open_wait); else { @@ -605,7 +596,7 @@ static inline void check_modem_status(struct esp_struct *info) */ static irqreturn_t rs_interrupt_single(int irq, void *dev_id) { - struct esp_struct * info; + struct esp_struct *info; unsigned err_status; unsigned int scratch; @@ -617,7 +608,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id) scratch = serial_in(info, UART_ESI_SID); spin_lock(&info->lock); - + if (!info->tty) { spin_unlock(&info->lock); return IRQ_NONE; @@ -637,7 +628,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id) if (err_status & 0x80) /* Start break */ wake_up_interruptible(&info->break_wait); } - + if ((scratch & 0x88) || /* DMA completed or timed out */ (err_status & 0x1c) /* receive error */) { if (info->stat_flags & ESP_STAT_DMA_RX) @@ -667,7 +658,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id) receive_chars_dma(info, num_bytes); } } - + if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) && (scratch & 0x02) && (info->IER & UART_IER_THRI)) { if ((info->xmit_cnt <= 0) || info->tty->stopped) { @@ -722,11 +713,11 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id) * --------------------------------------------------------------- */ -static inline void esp_basic_init(struct esp_struct * info) +static void esp_basic_init(struct esp_struct *info) { /* put ESPC in enhanced mode */ serial_out(info, UART_ESI_CMD1, ESI_SET_MODE); - + if (info->stat_flags & ESP_STAT_NEVER_DMA) serial_out(info, UART_ESI_CMD2, 0x01); else @@ -783,13 +774,13 @@ static inline void esp_basic_init(struct esp_struct * info) serial_out(info, UART_ESI_CMD2, 0xff); } -static int startup(struct esp_struct * info) +static int startup(struct esp_struct *info) { unsigned long flags; - int retval=0; - unsigned int num_chars; + int retval = 0; + unsigned int num_chars; - spin_lock_irqsave(&info->lock, flags); + spin_lock_irqsave(&info->lock, flags); if (info->flags & ASYNC_INITIALIZED) goto out; @@ -802,7 +793,8 @@ static int startup(struct esp_struct * info) } #ifdef SERIAL_DEBUG_OPEN - printk("starting up ttys%d (irq %d)...", info->line, info->irq); + printk(KERN_DEBUG "starting up ttys%d (irq %d)...", + info->line, info->irq); #endif /* Flush the RX buffer. Using the ESI flush command may cause */ @@ -863,7 +855,7 @@ static int startup(struct esp_struct * info) dma_buffer = NULL; info->stat_flags |= ESP_STAT_USE_PIO; } - + } info->MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; @@ -872,7 +864,7 @@ static int startup(struct esp_struct * info) serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); serial_out(info, UART_ESI_CMD2, UART_MCR); serial_out(info, UART_ESI_CMD2, info->MCR); - + /* * Finally, enable interrupts */ @@ -881,7 +873,7 @@ static int startup(struct esp_struct * info) UART_IER_DMA_TC; serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); serial_out(info, UART_ESI_CMD2, info->IER); - + if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; @@ -900,7 +892,7 @@ static int startup(struct esp_struct * info) if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) info->tty->alt_speed = 460800; } - + /* * set the speed of the serial port */ @@ -918,7 +910,7 @@ out_unlocked: * This routine will shutdown a serial port; interrupts are disabled, and * DTR is dropped if the hangup on close termio flag is on. */ -static void shutdown(struct esp_struct * info) +static void shutdown(struct esp_struct *info) { unsigned long flags, f; @@ -929,7 +921,7 @@ static void shutdown(struct esp_struct * info) printk("Shutting down serial port %d (irq %d)....", info->line, info->irq); #endif - + spin_lock_irqsave(&info->lock, flags); /* * clear delta_msr_wait queue to avoid mem leaks: we may free the irq @@ -941,14 +933,14 @@ static void shutdown(struct esp_struct * info) /* stop a DMA transfer on the port being closed */ /* DMA lock is higher priority always */ if (info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) { - f=claim_dma_lock(); + f = claim_dma_lock(); disable_dma(dma); clear_dma_ff(dma); release_dma_lock(f); - + dma_bytes = 0; } - + /* * Free the IRQ */ @@ -970,7 +962,7 @@ static void shutdown(struct esp_struct * info) free_pages((unsigned long)dma_buffer, get_order(DMA_BUFFER_SZ)); dma_buffer = NULL; - } + } } if (info->xmit_buf) { @@ -992,7 +984,7 @@ static void shutdown(struct esp_struct * info) if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); - + info->flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&info->lock, flags); } @@ -1005,7 +997,7 @@ static void change_speed(struct esp_struct *info) { unsigned short port; int quot = 0; - unsigned cflag,cval; + unsigned cflag, cval; int baud, bits; unsigned char flow1 = 0, flow2 = 0; unsigned long flags; @@ -1014,14 +1006,14 @@ static void change_speed(struct esp_struct *info) return; cflag = info->tty->termios->c_cflag; port = info->port; - + /* byte size and parity */ switch (cflag & CSIZE) { - case CS5: cval = 0x00; bits = 7; break; - case CS6: cval = 0x01; bits = 8; break; - case CS7: cval = 0x02; bits = 9; break; - case CS8: cval = 0x03; bits = 10; break; - default: cval = 0x00; bits = 7; break; + case CS5: cval = 0x00; bits = 7; break; + case CS6: cval = 0x01; bits = 8; break; + case CS7: cval = 0x02; bits = 9; break; + case CS8: cval = 0x03; bits = 10; break; + default: cval = 0x00; bits = 7; break; } if (cflag & CSTOPB) { cval |= 0x04; @@ -1037,14 +1029,12 @@ static void change_speed(struct esp_struct *info) if (cflag & CMSPAR) cval |= UART_LCR_SPAR; #endif - baud = tty_get_baud_rate(info->tty); if (baud == 38400 && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) + ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) quot = info->custom_divisor; else { - if (baud == 134) - /* Special case since 134 is really 134.5 */ + if (baud == 134) /* Special case since 134 is really 134.5 */ quot = (2*BASE_BAUD / 269); else if (baud) quot = BASE_BAUD / baud; @@ -1052,7 +1042,12 @@ static void change_speed(struct esp_struct *info) /* If the quotient is ever zero, default to 9600 bps */ if (!quot) quot = BASE_BAUD / 9600; - + + if (baud) { + /* Actual rate */ + baud = BASE_BAUD/quot; + tty_encode_baud_rate(info->tty, baud, baud); + } info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50); /* CTS flow control flag and modem status interrupts */ @@ -1066,10 +1061,8 @@ static void change_speed(struct esp_struct *info) info->flags &= ~ASYNC_CTS_FLOW; if (cflag & CLOCAL) info->flags &= ~ASYNC_CHECK_CD; - else { + else info->flags |= ASYNC_CHECK_CD; - /* info->IER |= UART_IER_MSI; */ - } /* * Set up parity check flag @@ -1079,7 +1072,7 @@ static void change_speed(struct esp_struct *info) info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) info->read_status_mask |= UART_LSR_BI; - + info->ignore_status_mask = 0; #if 0 /* This should be safe, but for some broken bits of hardware... */ @@ -1092,7 +1085,7 @@ static void change_speed(struct esp_struct *info) info->ignore_status_mask |= UART_LSR_BI; info->read_status_mask |= UART_LSR_BI; /* - * If we're ignore parity and break indicators, ignore + * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ if (I_IGNPAR(info->tty)) { @@ -1130,19 +1123,19 @@ static void change_speed(struct esp_struct *info) serial_out(info, UART_ESI_CMD2, 0x10); serial_out(info, UART_ESI_CMD2, 0x21); switch (cflag & CSIZE) { - case CS5: - serial_out(info, UART_ESI_CMD2, 0x1f); - break; - case CS6: - serial_out(info, UART_ESI_CMD2, 0x3f); - break; - case CS7: - case CS8: - serial_out(info, UART_ESI_CMD2, 0x7f); - break; - default: - serial_out(info, UART_ESI_CMD2, 0xff); - break; + case CS5: + serial_out(info, UART_ESI_CMD2, 0x1f); + break; + case CS6: + serial_out(info, UART_ESI_CMD2, 0x3f); + break; + case CS7: + case CS8: + serial_out(info, UART_ESI_CMD2, 0x7f); + break; + default: + serial_out(info, UART_ESI_CMD2, 0xff); + break; } } @@ -1158,7 +1151,7 @@ static void change_speed(struct esp_struct *info) static int rs_put_char(struct tty_struct *tty, unsigned char ch) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; int ret = 0; @@ -1181,9 +1174,9 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch) static void rs_flush_chars(struct tty_struct *tty) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; - + if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) return; @@ -1201,11 +1194,11 @@ out: spin_unlock_irqrestore(&info->lock, flags); } -static int rs_write(struct tty_struct * tty, +static int rs_write(struct tty_struct *tty, const unsigned char *buf, int count) { int c, t, ret = 0; - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_write")) @@ -1213,19 +1206,19 @@ static int rs_write(struct tty_struct * tty, if (!info->xmit_buf) return 0; - + while (1) { /* Thanks to R. Wolff for suggesting how to do this with */ /* interrupts enabled */ c = count; t = ESP_XMIT_SIZE - info->xmit_cnt - 1; - + if (t < c) c = t; t = ESP_XMIT_SIZE - info->xmit_head; - + if (t < c) c = t; @@ -1255,10 +1248,10 @@ static int rs_write(struct tty_struct * tty, static int rs_write_room(struct tty_struct *tty) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; int ret; unsigned long flags; - + if (serial_paranoia_check(info, tty->name, "rs_write_room")) return 0; @@ -1273,8 +1266,8 @@ static int rs_write_room(struct tty_struct *tty) static int rs_chars_in_buffer(struct tty_struct *tty) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; - + struct esp_struct *info = tty->driver_data; + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) return 0; return info->xmit_cnt; @@ -1282,9 +1275,9 @@ static int rs_chars_in_buffer(struct tty_struct *tty) static void rs_flush_buffer(struct tty_struct *tty) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; - + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) return; spin_lock_irqsave(&info->lock, flags); @@ -1296,20 +1289,20 @@ static void rs_flush_buffer(struct tty_struct *tty) /* * ------------------------------------------------------------ * rs_throttle() - * + * * This routine is called by the upper-layer tty layer to signal that * incoming characters should be throttled. * ------------------------------------------------------------ */ -static void rs_throttle(struct tty_struct * tty) +static void rs_throttle(struct tty_struct *tty) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; - + printk("throttle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); + tty_chars_in_buffer(tty)); #endif if (serial_paranoia_check(info, tty->name, "rs_throttle")) @@ -1324,20 +1317,20 @@ static void rs_throttle(struct tty_struct * tty) spin_unlock_irqrestore(&info->lock, flags); } -static void rs_unthrottle(struct tty_struct * tty) +static void rs_unthrottle(struct tty_struct *tty) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; - - printk("unthrottle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); + + printk(KERN_DEBUG "unthrottle %s: %d....\n", tty_name(tty, buf), + tty_chars_in_buffer(tty)); #endif if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) return; - + spin_lock_irqsave(&info->lock, flags); info->IER |= UART_IER_RDI; serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); @@ -1353,11 +1346,11 @@ static void rs_unthrottle(struct tty_struct * tty) * ------------------------------------------------------------ */ -static int get_serial_info(struct esp_struct * info, +static int get_serial_info(struct esp_struct *info, struct serial_struct __user *retinfo) { struct serial_struct tmp; - + lock_kernel(); memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_16550A; @@ -1372,16 +1365,16 @@ static int get_serial_info(struct esp_struct * info, tmp.custom_divisor = info->custom_divisor; tmp.hub6 = 0; unlock_kernel(); - if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) return -EFAULT; return 0; } -static int get_esp_config(struct esp_struct * info, +static int get_esp_config(struct esp_struct *info, struct hayes_esp_config __user *retinfo) { struct hayes_esp_config tmp; - + if (!retinfo) return -EFAULT; @@ -1399,7 +1392,7 @@ static int get_esp_config(struct esp_struct * info, return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; } -static int set_serial_info(struct esp_struct * info, +static int set_serial_info(struct esp_struct *info, struct serial_struct __user *new_info) { struct serial_struct new_serial; @@ -1408,7 +1401,7 @@ static int set_serial_info(struct esp_struct * info, int retval = 0; struct esp_struct *current_async; - if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) return -EFAULT; old_info = *info; @@ -1429,7 +1422,7 @@ static int set_serial_info(struct esp_struct * info, return -EINVAL; if (!capable(CAP_SYS_ADMIN)) { - if (change_irq || + if (change_irq || (new_serial.close_delay != info->close_delay) || ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) @@ -1514,8 +1507,8 @@ static int set_serial_info(struct esp_struct * info, return retval; } -static int set_esp_config(struct esp_struct * info, - struct hayes_esp_config __user * new_info) +static int set_esp_config(struct esp_struct *info, + struct hayes_esp_config __user *new_info) { struct hayes_esp_config new_config; unsigned int change_dma; @@ -1557,7 +1550,6 @@ static int set_esp_config(struct esp_struct * info, if (new_config.dma_channel) { /* PIO mode to DMA mode transition OR */ /* change current DMA channel */ - current_async = ports; while (current_async) { @@ -1566,16 +1558,15 @@ static int set_esp_config(struct esp_struct * info, return -EBUSY; } else if (current_async->count) return -EBUSY; - - current_async = - current_async->next_port; + + current_async = current_async->next_port; } shutdown(info); dma = new_config.dma_channel; info->stat_flags &= ~ESP_STAT_NEVER_DMA; - - /* all ports must use the same DMA channel */ + + /* all ports must use the same DMA channel */ spin_lock_irqsave(&info->lock, flags); current_async = ports; @@ -1587,7 +1578,6 @@ static int set_esp_config(struct esp_struct * info, spin_unlock_irqrestore(&info->lock, flags); } else { /* DMA mode to PIO mode only */ - if (info->count > 1) return -EBUSY; @@ -1658,9 +1648,9 @@ static int set_esp_config(struct esp_struct * info, * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. + * allows an RS485 driver to be written in user space. */ -static int get_lsr_info(struct esp_struct * info, unsigned int __user *value) +static int get_lsr_info(struct esp_struct *info, unsigned int __user *value) { unsigned char status; unsigned int result; @@ -1671,13 +1661,13 @@ static int get_lsr_info(struct esp_struct * info, unsigned int __user *value) status = serial_in(info, UART_ESI_STAT1); spin_unlock_irqrestore(&info->lock, flags); result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result,value); + return put_user(result, value); } static int esp_tiocmget(struct tty_struct *tty, struct file *file) { - struct esp_struct * info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned char control, status; unsigned long flags; @@ -1704,7 +1694,7 @@ static int esp_tiocmget(struct tty_struct *tty, struct file *file) static int esp_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct esp_struct * info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, __FUNCTION__)) @@ -1737,9 +1727,9 @@ static int esp_tiocmset(struct tty_struct *tty, struct file *file, */ static void esp_break(struct tty_struct *tty, int break_state) { - struct esp_struct * info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; - + if (serial_paranoia_check(info, tty->name, "esp_break")) return; @@ -1759,10 +1749,10 @@ static void esp_break(struct tty_struct *tty, int break_state) } } -static int rs_ioctl(struct tty_struct *tty, struct file * file, +static int rs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct esp_struct * info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; struct async_icount cprev, cnow; /* kernel counter temps */ struct serial_icounter_struct __user *p_cuser; /* user space */ void __user *argp = (void __user *)arg; @@ -1780,102 +1770,93 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } - - switch (cmd) { - case TIOCGSERIAL: - return get_serial_info(info, argp); - case TIOCSSERIAL: - lock_kernel(); - ret = set_serial_info(info, argp); - unlock_kernel(); - return ret; - case TIOCSERCONFIG: - /* do not reconfigure after initial configuration */ - return 0; - - case TIOCSERGWILD: - return put_user(0L, (unsigned long __user *)argp); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, argp); - - case TIOCSERSWILD: - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - return 0; - - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(info, argp); + case TIOCSSERIAL: + lock_kernel(); + ret = set_serial_info(info, argp); + unlock_kernel(); + return ret; + case TIOCSERGWILD: + return put_user(0L, (unsigned long __user *)argp); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, argp); + case TIOCSERSWILD: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + return 0; + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + spin_lock_irqsave(&info->lock, flags); + cprev = info->icount; /* note the counters on entry */ + spin_unlock_irqrestore(&info->lock, flags); + while (1) { + /* FIXME: convert to new style wakeup */ + interruptible_sleep_on(&info->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; spin_lock_irqsave(&info->lock, flags); - cprev = info->icount; /* note the counters on entry */ + cnow = info->icount; /* atomic copy */ spin_unlock_irqrestore(&info->lock, flags); - while (1) { - /* FIXME: convert to new style wakeup */ - interruptible_sleep_on(&info->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->lock, flags); - if (cnow.rng == cprev.rng && - cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && - cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && - (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && - (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && - (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && - (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; + if (cnow.rng == cprev.rng && + cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && + cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && + (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && + (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && + (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && + (cnow.cts != cprev.cts))) { + return 0; } - /* NOTREACHED */ - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock, flags); - p_cuser = argp; - if (put_user(cnow.cts, &p_cuser->cts) || - put_user(cnow.dsr, &p_cuser->dsr) || - put_user(cnow.rng, &p_cuser->rng) || - put_user(cnow.dcd, &p_cuser->dcd)) - return -EFAULT; - - return 0; - case TIOCGHAYESESP: - return get_esp_config(info, argp); - case TIOCSHAYESESP: - lock_kernel(); - ret = set_esp_config(info, argp); - unlock_kernel(); - return ret; - default: - return -ENOIOCTLCMD; + cprev = cnow; } + /* NOTREACHED */ + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + case TIOCGICOUNT: + spin_lock_irqsave(&info->lock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock, flags); + p_cuser = argp; + if (put_user(cnow.cts, &p_cuser->cts) || + put_user(cnow.dsr, &p_cuser->dsr) || + put_user(cnow.rng, &p_cuser->rng) || + put_user(cnow.dcd, &p_cuser->dcd)) + return -EFAULT; + return 0; + case TIOCGHAYESESP: + return get_esp_config(info, argp); + case TIOCSHAYESESP: + lock_kernel(); + ret = set_esp_config(info, argp); + unlock_kernel(); + return ret; + default: + return -ENOIOCTLCMD; + } return 0; } static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; change_speed(info); @@ -1912,32 +1893,33 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) /* * ------------------------------------------------------------ * rs_close() - * + * * This routine is called when the serial port gets closed. First, we * wait for the last remaining data to be sent. Then, we unlink its * async structure from the interrupt chain if necessary, and we free * that IRQ if nothing is left in the chain. * ------------------------------------------------------------ */ -static void rs_close(struct tty_struct *tty, struct file * filp) +static void rs_close(struct tty_struct *tty, struct file *filp) { - struct esp_struct * info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long flags; if (!info || serial_paranoia_check(info, tty->name, "rs_close")) return; - + spin_lock_irqsave(&info->lock, flags); - + if (tty_hung_up_p(filp)) { DBG_CNT("before DEC-hung"); goto out; } - + #ifdef SERIAL_DEBUG_OPEN - printk("rs_close ttys%d, count = %d\n", info->line, info->count); + printk(KERN_DEBUG "rs_close ttys%d, count = %d\n", + info->line, info->count); #endif - if ((tty->count == 1) && (info->count != 1)) { + if (tty->count == 1 && info->count != 1) { /* * Uh, oh. tty->count is 1, which means that the tty * structure will be freed. Info->count should always @@ -1945,12 +1927,11 @@ static void rs_close(struct tty_struct *tty, struct file * filp) * one, we've got real problems, since it means the * serial port won't be shutdown. */ - printk("rs_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); + printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->count is %d\n", info->count); info->count = 1; } if (--info->count < 0) { - printk("rs_close: bad serial port count for ttys%d: %d\n", + printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n", info->line, info->count); info->count = 0; } @@ -1962,7 +1943,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) spin_unlock_irqrestore(&info->lock, flags); /* - * Now we wait for the transmit buffer to clear; and we notify + * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; @@ -2003,9 +1984,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp) info->tty = NULL; if (info->blocked_open) { - if (info->close_delay) { + if (info->close_delay) msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); @@ -2018,7 +1998,7 @@ out: static void rs_wait_until_sent(struct tty_struct *tty, int timeout) { - struct esp_struct *info = (struct esp_struct *)tty->driver_data; + struct esp_struct *info = tty->driver_data; unsigned long orig_jiffies, char_time; unsigned long flags; @@ -2060,11 +2040,11 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) */ static void esp_hangup(struct tty_struct *tty) { - struct esp_struct * info = (struct esp_struct *)tty->driver_data; - + struct esp_struct *info = tty->driver_data; + if (serial_paranoia_check(info, tty->name, "esp_hangup")) return; - + rs_flush_buffer(tty); shutdown(info); info->count = 0; @@ -2078,7 +2058,7 @@ static void esp_hangup(struct tty_struct *tty) * esp_open() and friends * ------------------------------------------------------------ */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, +static int block_til_ready(struct tty_struct *tty, struct file *filp, struct esp_struct *info) { DECLARE_WAITQUEUE(wait, current); @@ -2127,11 +2107,11 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, retval = 0; add_wait_queue(&info->open_wait, &wait); #ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttys%d, count = %d\n", + printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n", info->line, info->count); #endif spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) + if (!tty_hung_up_p(filp)) info->count--; info->blocked_open++; while (1) { @@ -2153,7 +2133,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (info->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else - retval = -ERESTARTSYS; + retval = -ERESTARTSYS; #else retval = -EAGAIN; #endif @@ -2172,7 +2152,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, break; } #ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttys%d, count = %d\n", + printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n", info->line, info->count); #endif spin_unlock_irqrestore(&info->lock, flags); @@ -2186,14 +2166,14 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, info->blocked_open--; spin_unlock_irqrestore(&info->lock, flags); #ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttys%d, count = %d\n", + printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n", info->line, info->count); #endif if (retval) return retval; info->flags |= ASYNC_NORMAL_ACTIVE; return 0; -} +} /* * This routine is called whenever a serial port is opened. It @@ -2201,7 +2181,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, * the IRQ chain. It also performs the serial-specific * initialization for the tty structure. */ -static int esp_open(struct tty_struct *tty, struct file * filp) +static int esp_open(struct tty_struct *tty, struct file *filp) { struct esp_struct *info; int retval, line; @@ -2224,7 +2204,7 @@ static int esp_open(struct tty_struct *tty, struct file * filp) } #ifdef SERIAL_DEBUG_OPEN - printk("esp_open %s, count = %d\n", tty->name, info->count); + printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->count); #endif spin_lock_irqsave(&info->lock, flags); info->count++; @@ -2232,7 +2212,7 @@ static int esp_open(struct tty_struct *tty, struct file * filp) info->tty = tty; spin_unlock_irqrestore(&info->lock, flags); - + /* * Start up serial port */ @@ -2243,14 +2223,13 @@ static int esp_open(struct tty_struct *tty, struct file * filp) retval = block_til_ready(tty, filp, info); if (retval) { #ifdef SERIAL_DEBUG_OPEN - printk("esp_open returning after block_til_ready with %d\n", + printk(KERN_DEBUG "esp_open returning after block_til_ready with %d\n", retval); #endif return retval; } - #ifdef SERIAL_DEBUG_OPEN - printk("esp_open %s successful...", tty->name); + printk(KERN_DEBUG "esp_open %s successful...", tty->name); #endif return 0; } @@ -2268,10 +2247,10 @@ static int esp_open(struct tty_struct *tty, struct file * filp) * number, and identifies which options were configured into this * driver. */ - -static inline void show_serial_version(void) + +static void show_serial_version(void) { - printk(KERN_INFO "%s version %s (DMA %u)\n", + printk(KERN_INFO "%s version %s (DMA %u)\n", serial_name, serial_version, dma); } @@ -2279,7 +2258,7 @@ static inline void show_serial_version(void) * This routine is called by espserial_init() to initialize a specific serial * port. */ -static inline int autoconfig(struct esp_struct * info) +static int autoconfig(struct esp_struct *info) { int port_detected = 0; unsigned long flags; @@ -2355,14 +2334,14 @@ static const struct tty_operations esp_ops = { static int __init espserial_init(void) { int i, offset; - struct esp_struct * info; + struct esp_struct *info; struct esp_struct *last_primary = NULL; - int esp[] = {0x100,0x140,0x180,0x200,0x240,0x280,0x300,0x380}; + int esp[] = { 0x100, 0x140, 0x180, 0x200, 0x240, 0x280, 0x300, 0x380 }; esp_driver = alloc_tty_driver(NR_PORTS); if (!esp_driver) return -ENOMEM; - + for (i = 0; i < NR_PRIMARY; i++) { if (irq[i] != 0) { if ((irq[i] < 2) || (irq[i] > 15) || (irq[i] == 6) || @@ -2384,20 +2363,20 @@ static int __init espserial_init(void) if ((flow_off < 1) || (flow_off > 1023)) flow_off = 1016; - + if ((flow_on < 1) || (flow_on > 1023)) flow_on = 944; if ((rx_timeout < 0) || (rx_timeout > 255)) rx_timeout = 128; - + if (flow_on >= flow_off) flow_on = flow_off - 1; show_serial_version(); /* Initialize the tty_driver structure */ - + esp_driver->owner = THIS_MODULE; esp_driver->name = "ttyP"; esp_driver->major = ESP_IN_MAJOR; @@ -2407,10 +2386,11 @@ static int __init espserial_init(void) esp_driver->init_termios = tty_std_termios; esp_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + esp_driver->init_termios.c_ispeed = 9600; + esp_driver->init_termios.c_ospeed = 9600; esp_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(esp_driver, &esp_ops); - if (tty_register_driver(esp_driver)) - { + if (tty_register_driver(esp_driver)) { printk(KERN_ERR "Couldn't register esp serial driver"); put_tty_driver(esp_driver); return 1; @@ -2418,8 +2398,7 @@ static int __init espserial_init(void) info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL); - if (!info) - { + if (!info) { printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); tty_unregister_driver(esp_driver); put_tty_driver(esp_driver); @@ -2482,10 +2461,8 @@ static int __init espserial_init(void) info->stat_flags |= ESP_STAT_NEVER_DMA; info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL); - if (!info) - { - printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); - + if (!info) { + printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); /* allow use of the already detected ports */ return 0; } @@ -2509,22 +2486,20 @@ static int __init espserial_init(void) return 0; } -static void __exit espserial_exit(void) +static void __exit espserial_exit(void) { int e1; struct esp_struct *temp_async; struct esp_pio_buffer *pio_buf; - /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ - if ((e1 = tty_unregister_driver(esp_driver))) - printk("SERIAL: failed to unregister serial driver (%d)\n", - e1); + e1 = tty_unregister_driver(esp_driver); + if (e1) + printk(KERN_ERR "esp: failed to unregister driver (%d)\n", e1); put_tty_driver(esp_driver); while (ports) { - if (ports->port) { + if (ports->port) release_region(ports->port, REGION_SIZE); - } temp_async = ports->next_port; kfree(ports); ports = temp_async; |
