14 files changed, 25 insertions, 309 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4364303..ee946865 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -66,21 +66,6 @@ config TTY_PRINTK
 
 	  If unsure, say N.
 
-config BRIQ_PANEL
-	tristate 'Total Impact briQ front panel driver'
-	depends on PPC_CHRP
-	---help---
-	  The briQ is a small footprint CHRP computer with a frontpanel VFD, a
-	  tristate led and two switches. It is the size of a CDROM drive.
-
-	  If you have such one and want anything showing on the VFD then you
-	  must answer Y here.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called briq_panel.
-
-	  It's safe to say N here.
-
 config BFIN_OTP
 	tristate "Blackfin On-Chip OTP Memory Support"
 	depends on BLACKFIN && (BF51x || BF52x || BF54x)
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 32762ba..0dc5d7c 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
 obj-$(CONFIG_VIOTAPE)		+= viotape.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
 obj-$(CONFIG_SGI_MBCS)		+= mbcs.o
-obj-$(CONFIG_BRIQ_PANEL)	+= briq_panel.o
 obj-$(CONFIG_BFIN_OTP)		+= bfin-otp.o
 
 obj-$(CONFIG_PRINTER)		+= lp.o
diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c
deleted file mode 100644
index 095ab90..0000000
--- a/drivers/char/briq_panel.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Drivers for the Total Impact PPC based computer "BRIQ"
- * by Dr. Karsten Jeppesen
- *
- */
-
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/timer.h>
-#include <linux/kernel.h>
-#include <linux/wait.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-
-#define		BRIQ_PANEL_MINOR	156
-#define		BRIQ_PANEL_VFD_IOPORT	0x0390
-#define		BRIQ_PANEL_LED_IOPORT	0x0398
-#define		BRIQ_PANEL_VER		"1.1 (04/20/2002)"
-#define		BRIQ_PANEL_MSG0		"Loading Linux"
-
-static int		vfd_is_open;
-static unsigned char	vfd[40];
-static int		vfd_cursor;
-static unsigned char	ledpb, led;
-
-static void update_vfd(void)
-{
-	int	i;
-
-	/* cursor home */
-	outb(0x02, BRIQ_PANEL_VFD_IOPORT);
-	for (i=0; i<20; i++)
-		outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
-	/* cursor to next line */
-	outb(0xc0, BRIQ_PANEL_VFD_IOPORT);
-	for (i=20; i<40; i++)
-		outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
-}
-
-static void set_led(char state)
-{
-	if (state == 'R')
-		led = 0x01;
-	else if (state == 'G')
-		led = 0x02;
-	else if (state == 'Y')
-		led = 0x03;
-	else if (state == 'X')
-		led = 0x00;
-	outb(led, BRIQ_PANEL_LED_IOPORT);
-}
-
-static int briq_panel_open(struct inode *ino, struct file *filep)
-{
-	tty_lock();
-	/* enforce single access, vfd_is_open is protected by BKL */
-	if (vfd_is_open) {
-		tty_unlock();
-		return -EBUSY;
-	}
-	vfd_is_open = 1;
-
-	tty_unlock();
-	return 0;
-}
-
-static int briq_panel_release(struct inode *ino, struct file *filep)
-{
-	if (!vfd_is_open)
-		return -ENODEV;
-
-	vfd_is_open = 0;
-
-	return 0;
-}
-
-static ssize_t briq_panel_read(struct file *file, char __user *buf, size_t count,
-			 loff_t *ppos)
-{
-	unsigned short c;
-	unsigned char cp;
-
-	if (!vfd_is_open)
-		return -ENODEV;
-
-	c = (inb(BRIQ_PANEL_LED_IOPORT) & 0x000c) | (ledpb & 0x0003);
-	set_led(' ');
-	/* upper button released */
-	if ((!(ledpb & 0x0004)) && (c & 0x0004)) {
-		cp = ' ';
-		ledpb = c;
-		if (copy_to_user(buf, &cp, 1))
-			return -EFAULT;
-		return 1;
-	}
-	/* lower button released */
-	else if ((!(ledpb & 0x0008)) && (c & 0x0008)) {
-		cp = '\r';
-		ledpb = c;
-		if (copy_to_user(buf, &cp, 1))
-			return -EFAULT;
-		return 1;
-	} else {
-		ledpb = c;
-		return 0;
-	}
-}
-
-static void scroll_vfd( void )
-{
-	int	i;
-
-	for (i=0; i<20; i++) {
-		vfd[i] = vfd[i+20];
-		vfd[i+20] = ' ';
-	}
-	vfd_cursor = 20;
-}
-
-static ssize_t briq_panel_write(struct file *file, const char __user *buf, size_t len,
-			  loff_t *ppos)
-{
-	size_t indx = len;
-	int i, esc = 0;
-
-	if (!vfd_is_open)
-		return -EBUSY;
-
-	for (;;) {
-		char c;
-		if (!indx)
-			break;
-		if (get_user(c, buf))
-			return -EFAULT;
-		if (esc) {
-			set_led(c);
-			esc = 0;
-		} else if (c == 27) {
-			esc = 1;
-		} else if (c == 12) {
-			/* do a form feed */
-			for (i=0; i<40; i++)
-				vfd[i] = ' ';
-			vfd_cursor = 0;
-		} else if (c == 10) {
-			if (vfd_cursor < 20)
-				vfd_cursor = 20;
-			else if (vfd_cursor < 40)
-				vfd_cursor = 40;
-			else if (vfd_cursor < 60)
-				vfd_cursor = 60;
-			if (vfd_cursor > 59)
-				scroll_vfd();
-		} else {
-			/* just a character */
-			if (vfd_cursor > 39)
-				scroll_vfd();
-			vfd[vfd_cursor++] = c;
-		}
-		indx--;
-		buf++;
-	}
-	update_vfd();
-
-	return len;
-}
-
-static const struct file_operations briq_panel_fops = {
-	.owner		= THIS_MODULE,
-	.read		= briq_panel_read,
-	.write		= briq_panel_write,
-	.open		= briq_panel_open,
-	.release	= briq_panel_release,
-	.llseek		= noop_llseek,
-};
-
-static struct miscdevice briq_panel_miscdev = {
-	BRIQ_PANEL_MINOR,
-	"briq_panel",
-	&briq_panel_fops
-};
-
-static int __init briq_panel_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const char *machine;
-	int i;
-
-	machine = of_get_property(root, "model", NULL);
-	if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0) {
-		of_node_put(root);
-		return -ENODEV;
-	}
-	of_node_put(root);
-
-	printk(KERN_INFO
-		"briq_panel: v%s Dr. Karsten Jeppesen (kj@totalimpact.com)\n",
-		BRIQ_PANEL_VER);
-
-	if (!request_region(BRIQ_PANEL_VFD_IOPORT, 4, "BRIQ Front Panel"))
-		return -EBUSY;
-
-	if (!request_region(BRIQ_PANEL_LED_IOPORT, 2, "BRIQ Front Panel")) {
-		release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-		return -EBUSY;
-	}
-	ledpb = inb(BRIQ_PANEL_LED_IOPORT) & 0x000c;
-
-	if (misc_register(&briq_panel_miscdev) < 0) {
-		release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-		release_region(BRIQ_PANEL_LED_IOPORT, 2);
-		return -EBUSY;
-	}
-
-	outb(0x38, BRIQ_PANEL_VFD_IOPORT);	/* Function set */
-	outb(0x01, BRIQ_PANEL_VFD_IOPORT);	/* Clear display */
-	outb(0x0c, BRIQ_PANEL_VFD_IOPORT);	/* Display on */
-	outb(0x06, BRIQ_PANEL_VFD_IOPORT);	/* Entry normal */
-	for (i=0; i<40; i++)
-		vfd[i]=' ';
-#ifndef MODULE
-	vfd[0] = 'L';
-	vfd[1] = 'o';
-	vfd[2] = 'a';
-	vfd[3] = 'd';
-	vfd[4] = 'i';
-	vfd[5] = 'n';
-	vfd[6] = 'g';
-	vfd[7] = ' ';
-	vfd[8] = '.';
-	vfd[9] = '.';
-	vfd[10] = '.';
-#endif /* !MODULE */
-
-	update_vfd();
-
-	return 0;
-}
-
-static void __exit briq_panel_exit(void)
-{
-	misc_deregister(&briq_panel_miscdev);
-	release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-	release_region(BRIQ_PANEL_LED_IOPORT, 2);
-}
-
-module_init(briq_panel_init);
-module_exit(briq_panel_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Karsten Jeppesen <karsten@jeppesens.com>");
-MODULE_DESCRIPTION("Driver for the Total Impact briQ front panel");
diff --git a/drivers/char/hw_random/tx4939-rng.c b/drivers/char/hw_random/tx4939-rng.c
index 0bc0cb7..de473ef 100644
--- a/drivers/char/hw_random/tx4939-rng.c
+++ b/drivers/char/hw_random/tx4939-rng.c
@@ -115,10 +115,7 @@ static int __init tx4939_rng_probe(struct platform_device *dev)
 	rngdev = devm_kzalloc(&dev->dev, sizeof(*rngdev), GFP_KERNEL);
 	if (!rngdev)
 		return -ENOMEM;
-	if (!devm_request_mem_region(&dev->dev, r->start, resource_size(r),
-				     dev_name(&dev->dev)))
-		return -EBUSY;
-	rngdev->base = devm_ioremap(&dev->dev, r->start, resource_size(r));
+	rngdev->base = devm_request_and_ioremap(&dev->dev, r);
 	if (!rngdev->base)
 		return -EBUSY;
 
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index da3cfee..eaade8a 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -94,7 +94,7 @@
 /* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
  * rtc_lock held. Due to the index-port/data-port design of the RTC, we
  * don't want two different things trying to get to it at once. (e.g. the
- * periodic 11 min sync from time.c vs. this driver.)
+ * periodic 11 min sync from kernel/time/ntp.c vs. this driver.)
  */
 
 #include <linux/types.h>
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 07f6a5a..f6453df 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2484,7 +2484,7 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
 
 	/* verify range of specified line number */
 	line = tty->index;
-	if ((line < 0) || (line >= mgslpc_device_count)) {
+	if (line >= mgslpc_device_count) {
 		printk("%s(%d):mgslpc_open with invalid line #%d.\n",
 			__FILE__,__LINE__,line);
 		return -ENODEV;
@@ -2836,7 +2836,6 @@ static int __init synclink_cs_init(void)
 
     /* Initialize the tty_driver structure */
 
-    serial_driver->owner = THIS_MODULE;
     serial_driver->driver_name = "synclink_cs";
     serial_driver->name = "ttySLP";
     serial_driver->major = ttymajor;
diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
index 9fec323..2a5e45d2 100644
--- a/drivers/char/ramoops.c
+++ b/drivers/char/ramoops.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/kmsg_dump.h>
 #include <linux/time.h>
-#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index ccd124a..872e09a 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -57,8 +57,8 @@
  *	Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
  *	interrupts disabled. Due to the index-port/data-port (0x70/0x71)
  *	design of the RTC, we don't want two different things trying to
- *	get to it at once. (e.g. the periodic 11 min sync from time.c vs.
- *	this driver.)
+ *	get to it at once. (e.g. the periodic 11 min sync from
+ *      kernel/time/ntp.c vs. this driver.)
  */
 
 #include <linux/interrupt.h>
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index 0c964cd..ce29e7c 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -797,7 +797,7 @@ static int __init tlclk_init(void)
 	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
 
 	if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
-		printk(KERN_ERR "telclk_interrup = 0x%x non-mcpbl0010 hw.\n",
+		printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n",
 			telclk_interrupt);
 		ret = -ENXIO;
 		goto out3;
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 7fc75e4..a048199 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -5,7 +5,6 @@
 menuconfig TCG_TPM
 	tristate "TPM Hardware Support"
 	depends on HAS_IOMEM
-	depends on EXPERIMENTAL
 	select SECURITYFS
 	---help---
 	  If you have a TPM security chip in your system, which
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 32362cf..ad7c732 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -1221,12 +1221,13 @@ ssize_t tpm_read(struct file *file, char __user *buf,
 	ret_size = atomic_read(&chip->data_pending);
 	atomic_set(&chip->data_pending, 0);
 	if (ret_size > 0) {	/* relay data */
+		ssize_t orig_ret_size = ret_size;
 		if (size < ret_size)
 			ret_size = size;
 
 		mutex_lock(&chip->buffer_mutex);
 		rc = copy_to_user(buf, chip->data_buffer, ret_size);
-		memset(chip->data_buffer, 0, ret_size);
+		memset(chip->data_buffer, 0, orig_ret_size);
 		if (rc)
 			ret_size = -EFAULT;
 
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 0105471..b1c5280 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -99,6 +99,8 @@ struct tpm_vendor_specific {
 	wait_queue_head_t int_queue;
 };
 
+#define TPM_VID_INTEL    0x8086
+
 struct tpm_chip {
 	struct device *dev;	/* Device stuff */
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index a174862..d2a70ca 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -76,7 +76,7 @@ enum tis_defaults {
 #define	TPM_RID(l)			(0x0F04 | ((l) << 12))
 
 static LIST_HEAD(tis_chips);
-static DEFINE_SPINLOCK(tis_lock);
+static DEFINE_MUTEX(tis_lock);
 
 #if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
 static int is_itpm(struct pnp_dev *dev)
@@ -367,7 +367,12 @@ static int probe_itpm(struct tpm_chip *chip)
 		0x00, 0x00, 0x00, 0xf1
 	};
 	size_t len = sizeof(cmd_getticks);
-	int rem_itpm = itpm;
+	bool rem_itpm = itpm;
+	u16 vendor = ioread16(chip->vendor.iobase + TPM_DID_VID(0));
+
+	/* probe only iTPMS */
+	if (vendor != TPM_VID_INTEL)
+		return 0;
 
 	itpm = 0;
 
@@ -390,9 +395,6 @@ static int probe_itpm(struct tpm_chip *chip)
 out:
 	itpm = rem_itpm;
 	tpm_tis_ready(chip);
-	/* some TPMs need a break here otherwise they will not work
-	 * correctly on the immediately subsequent command */
-	msleep(chip->vendor.timeout_b);
 	release_locality(chip, chip->vendor.locality, 0);
 
 	return rc;
@@ -508,7 +510,7 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 			resource_size_t len, unsigned int irq)
 {
 	u32 vendor, intfcaps, intmask;
-	int rc, i, irq_s, irq_e;
+	int rc, i, irq_s, irq_e, probe;
 	struct tpm_chip *chip;
 
 	if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
@@ -538,11 +540,12 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
 	if (!itpm) {
-		itpm = probe_itpm(chip);
-		if (itpm < 0) {
+		probe = probe_itpm(chip);
+		if (probe < 0) {
 			rc = -ENODEV;
 			goto out_err;
 		}
+		itpm = (probe == 0) ? 0 : 1;
 	}
 
 	if (itpm)
@@ -689,9 +692,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 	}
 
 	INIT_LIST_HEAD(&chip->vendor.list);
-	spin_lock(&tis_lock);
+	mutex_lock(&tis_lock);
 	list_add(&chip->vendor.list, &tis_chips);
-	spin_unlock(&tis_lock);
+	mutex_unlock(&tis_lock);
 
 
 	return 0;
@@ -855,7 +858,7 @@ static void __exit cleanup_tis(void)
 {
 	struct tpm_vendor_specific *i, *j;
 	struct tpm_chip *chip;
-	spin_lock(&tis_lock);
+	mutex_lock(&tis_lock);
 	list_for_each_entry_safe(i, j, &tis_chips, list) {
 		chip = to_tpm_chip(i);
 		tpm_remove_hardware(chip->dev);
@@ -871,7 +874,7 @@ static void __exit cleanup_tis(void)
 		iounmap(i->iobase);
 		list_del(&i->list);
 	}
-	spin_unlock(&tis_lock);
+	mutex_unlock(&tis_lock);
 #ifdef CONFIG_PNP
 	if (!force) {
 		pnp_unregister_driver(&tis_pnp_driver);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index eedd547..46b77ed 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -184,12 +184,10 @@ static int __init ttyprintk_init(void)
 	if (!ttyprintk_driver)
 		return ret;
 
-	ttyprintk_driver->owner = THIS_MODULE;
 	ttyprintk_driver->driver_name = "ttyprintk";
 	ttyprintk_driver->name = "ttyprintk";
 	ttyprintk_driver->major = TTYAUX_MAJOR;
 	ttyprintk_driver->minor_start = 3;
-	ttyprintk_driver->num = 1;
 	ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
 	ttyprintk_driver->init_termios = tty_std_termios;
 	ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;