diff options
Diffstat (limited to 'drivers/char')
51 files changed, 0 insertions, 20308 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 7b8cf02..04f8b2d0 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -15,34 +15,6 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". -config SX - tristate "Specialix SX (and SI) card support" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN - help - This is a driver for the SX and SI multiport serial cards. - Please read the file <file:Documentation/serial/sx.txt> for details. - - This driver can only be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called sx. If you want to do that, say M here. - -config RIO - tristate "Specialix RIO system support" - depends on SERIAL_NONSTANDARD && BROKEN - help - This is a driver for the Specialix RIO, a smart serial card which - drives an outboard box that can support up to 128 ports. Product - information is at <http://www.perle.com/support/documentation.html#multiport>. - There are both ISA and PCI versions. - -config RIO_OLDPCI - bool "Support really old RIO/PCI cards" - depends on RIO - help - Older RIO PCI cards need some initialization-time configuration to - determine the IRQ and some control addresses. If you have a RIO and - this doesn't seem to work, try setting this to Y. - config STALDRV bool "Stallion multiport serial support" depends on SERIAL_NONSTANDARD @@ -55,22 +27,6 @@ config STALDRV in this case. If you have never heard about all this, it's safe to say N. -config A2232 - tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ZORRO && BROKEN - ---help--- - This option supports the 2232 7-port serial card shipped with the - Amiga 2000 and other Zorro-bus machines, dating from 1989. At - a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip - each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The - ports were connected with 8 pin DIN connectors on the card bracket, - for which 8 pin to DB25 adapters were supplied. The card also had - jumpers internally to toggle various pinning configurations. - - This driver can be built as a module; but then "generic_serial" - will also be built as a module. This has to be loaded before - "ser_a2232". If you want to do this, answer M here. - config SGI_SNSC bool "SGI Altix system controller communication support" depends on (IA64_SGI_SN2 || IA64_GENERIC) diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 48bb8ac..3ca1f62 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -5,13 +5,7 @@ obj-y += mem.o random.o obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o obj-y += misc.o -obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -obj-$(CONFIG_SX) += sx.o generic_serial.o -obj-$(CONFIG_RIO) += rio/ generic_serial.o obj-$(CONFIG_RAW_DRIVER) += raw.o obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o obj-$(CONFIG_MSPEC) += mspec.o diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c deleted file mode 100644 index 5954ee1..0000000 --- a/drivers/char/generic_serial.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * generic_serial.c - * - * Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl - * - * written for the SX serial driver. - * Contains the code that should be shared over all the serial drivers. - * - * Credit for the idea to do it this way might go to Alan Cox. - * - * - * Version 0.1 -- December, 1998. Initial version. - * Version 0.2 -- March, 1999. Some more routines. Bugfixes. Etc. - * Version 0.5 -- August, 1999. Some more fixes. Reformat for Linus. - * - * BitWizard is actively maintaining this file. We sometimes find - * that someone submitted changes to this file. We really appreciate - * your help, but please submit changes through us. We're doing our - * best to be responsive. -- REW - * */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/tty.h> -#include <linux/sched.h> -#include <linux/serial.h> -#include <linux/mm.h> -#include <linux/generic_serial.h> -#include <linux/interrupt.h> -#include <linux/tty_flip.h> -#include <linux/delay.h> -#include <linux/gfp.h> -#include <asm/uaccess.h> - -#define DEBUG - -static int gs_debug; - -#ifdef DEBUG -#define gs_dprintk(f, str...) if (gs_debug & f) printk (str) -#else -#define gs_dprintk(f, str...) /* nothing */ -#endif - -#define func_enter() gs_dprintk (GS_DEBUG_FLOW, "gs: enter %s\n", __func__) -#define func_exit() gs_dprintk (GS_DEBUG_FLOW, "gs: exit %s\n", __func__) - -#define RS_EVENT_WRITE_WAKEUP 1 - -module_param(gs_debug, int, 0644); - - -int gs_put_char(struct tty_struct * tty, unsigned char ch) -{ - struct gs_port *port; - - func_enter (); - - port = tty->driver_data; - - if (!port) return 0; - - if (! (port->port.flags & ASYNC_INITIALIZED)) return 0; - - /* Take a lock on the serial tranmit buffer! */ - mutex_lock(& port->port_write_mutex); - - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { - /* Sorry, buffer is full, drop character. Update statistics???? -- REW */ - mutex_unlock(&port->port_write_mutex); - return 0; - } - - port->xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= SERIAL_XMIT_SIZE - 1; - port->xmit_cnt++; /* Characters in buffer */ - - mutex_unlock(&port->port_write_mutex); - func_exit (); - return 1; -} - - -/* -> Problems to take into account are: -> -1- Interrupts that empty part of the buffer. -> -2- page faults on the access to userspace. -> -3- Other processes that are also trying to do a "write". -*/ - -int gs_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - struct gs_port *port; - int c, total = 0; - int t; - - func_enter (); - - port = tty->driver_data; - - if (!port) return 0; - - if (! (port->port.flags & ASYNC_INITIALIZED)) - return 0; - - /* get exclusive "write" access to this port (problem 3) */ - /* This is not a spinlock because we can have a disk access (page - fault) in copy_from_user */ - mutex_lock(& port->port_write_mutex); - - while (1) { - - c = count; - - /* This is safe because we "OWN" the "head". Noone else can - change the "head": we own the port_write_mutex. */ - /* Don't overrun the end of the buffer */ - t = SERIAL_XMIT_SIZE - port->xmit_head; - if (t < c) c = t; - - /* This is safe because the xmit_cnt can only decrease. This - would increase "t", so we might copy too little chars. */ - /* Don't copy past the "head" of the buffer */ - t = SERIAL_XMIT_SIZE - 1 - port->xmit_cnt; - if (t < c) c = t; - - /* Can't copy more? break out! */ - if (c <= 0) break; - - memcpy (port->xmit_buf + port->xmit_head, buf, c); - - port -> xmit_cnt += c; - port -> xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE -1); - buf += c; - count -= c; - total += c; - } - mutex_unlock(& port->port_write_mutex); - - gs_dprintk (GS_DEBUG_WRITE, "write: interrupts are %s\n", - (port->port.flags & GS_TX_INTEN)?"enabled": "disabled"); - - if (port->xmit_cnt && - !tty->stopped && - !tty->hw_stopped && - !(port->port.flags & GS_TX_INTEN)) { - port->port.flags |= GS_TX_INTEN; - port->rd->enable_tx_interrupts (port); - } - func_exit (); - return total; -} - - - -int gs_write_room(struct tty_struct * tty) -{ - struct gs_port *port = tty->driver_data; - int ret; - - func_enter (); - ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (ret < 0) - ret = 0; - func_exit (); - return ret; -} - - -int gs_chars_in_buffer(struct tty_struct *tty) -{ - struct gs_port *port = tty->driver_data; - func_enter (); - - func_exit (); - return port->xmit_cnt; -} - - -static int gs_real_chars_in_buffer(struct tty_struct *tty) -{ - struct gs_port *port; - func_enter (); - - port = tty->driver_data; - - if (!port->rd) return 0; - if (!port->rd->chars_in_buffer) return 0; - - func_exit (); - return port->xmit_cnt + port->rd->chars_in_buffer (port); -} - - -static int gs_wait_tx_flushed (void * ptr, unsigned long timeout) -{ - struct gs_port *port = ptr; - unsigned long end_jiffies; - int jiffies_to_transmit, charsleft = 0, rv = 0; - int rcib; - - func_enter(); - - gs_dprintk (GS_DEBUG_FLUSH, "port=%p.\n", port); - if (port) { - gs_dprintk (GS_DEBUG_FLUSH, "xmit_cnt=%x, xmit_buf=%p, tty=%p.\n", - port->xmit_cnt, port->xmit_buf, port->port.tty); - } - - if (!port || port->xmit_cnt < 0 || !port->xmit_buf) { - gs_dprintk (GS_DEBUG_FLUSH, "ERROR: !port, !port->xmit_buf or prot->xmit_cnt < 0.\n"); - func_exit(); - return -EINVAL; /* This is an error which we don't know how to handle. */ - } - - rcib = gs_real_chars_in_buffer(port->port.tty); - - if(rcib <= 0) { - gs_dprintk (GS_DEBUG_FLUSH, "nothing to wait for.\n"); - func_exit(); - return rv; - } - /* stop trying: now + twice the time it would normally take + seconds */ - if (timeout == 0) timeout = MAX_SCHEDULE_TIMEOUT; - end_jiffies = jiffies; - if (timeout != MAX_SCHEDULE_TIMEOUT) - end_jiffies += port->baud?(2 * rcib * 10 * HZ / port->baud):0; - end_jiffies += timeout; - - gs_dprintk (GS_DEBUG_FLUSH, "now=%lx, end=%lx (%ld).\n", - jiffies, end_jiffies, end_jiffies-jiffies); - - /* the expression is actually jiffies < end_jiffies, but that won't - work around the wraparound. Tricky eh? */ - while ((charsleft = gs_real_chars_in_buffer (port->port.tty)) && - time_after (end_jiffies, jiffies)) { - /* Units check: - chars * (bits/char) * (jiffies /sec) / (bits/sec) = jiffies! - check! */ - - charsleft += 16; /* Allow 16 chars more to be transmitted ... */ - jiffies_to_transmit = port->baud?(1 + charsleft * 10 * HZ / port->baud):0; - /* ^^^ Round up.... */ - if (jiffies_to_transmit <= 0) jiffies_to_transmit = 1; - - gs_dprintk (GS_DEBUG_FLUSH, "Expect to finish in %d jiffies " - "(%d chars).\n", jiffies_to_transmit, charsleft); - - msleep_interruptible(jiffies_to_msecs(jiffies_to_transmit)); - if (signal_pending (current)) { - gs_dprintk (GS_DEBUG_FLUSH, "Signal pending. Bombing out: "); - rv = -EINTR; - break; - } - } - - gs_dprintk (GS_DEBUG_FLUSH, "charsleft = %d.\n", charsleft); - set_current_state (TASK_RUNNING); - - func_exit(); - return rv; -} - - - -void gs_flush_buffer(struct tty_struct *tty) -{ - struct gs_port *port; - unsigned long flags; - - func_enter (); - - port = tty->driver_data; - - if (!port) return; - - /* XXX Would the write semaphore do? */ - spin_lock_irqsave (&port->driver_lock, flags); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore (&port->driver_lock, flags); - - tty_wakeup(tty); - func_exit (); -} - - -void gs_flush_chars(struct tty_struct * tty) -{ - struct gs_port *port; - - func_enter (); - - port = tty->driver_data; - - if (!port) return; - - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !port->xmit_buf) { - func_exit (); - return; - } - - /* Beats me -- REW */ - port->port.flags |= GS_TX_INTEN; - port->rd->enable_tx_interrupts (port); - func_exit (); -} - - -void gs_stop(struct tty_struct * tty) -{ - struct gs_port *port; - - func_enter (); - - port = tty->driver_data; - - if (!port) return; - - if (port->xmit_cnt && - port->xmit_buf && - (port->port.flags & GS_TX_INTEN) ) { - port->port.flags &= ~GS_TX_INTEN; - port->rd->disable_tx_interrupts (port); - } - func_exit (); -} - - -void gs_start(struct tty_struct * tty) -{ - struct gs_port *port; - - port = tty->driver_data; - - if (!port) return; - - if (port->xmit_cnt && - port->xmit_buf && - !(port->port.flags & GS_TX_INTEN) ) { - port->port.flags |= GS_TX_INTEN; - port->rd->enable_tx_interrupts (port); - } - func_exit (); -} - - -static void gs_shutdown_port (struct gs_port *port) -{ - unsigned long flags; - - func_enter(); - - if (!port) return; - - if (!(port->port.flags & ASYNC_INITIALIZED)) - return; - - spin_lock_irqsave(&port->driver_lock, flags); - - if (port->xmit_buf) { - free_page((unsigned long) port->xmit_buf); - port->xmit_buf = NULL; - } - - if (port->port.tty) - set_bit(TTY_IO_ERROR, &port->port.tty->flags); - - port->rd->shutdown_port (port); - - port->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->driver_lock, flags); - - func_exit(); -} - - -void gs_hangup(struct tty_struct *tty) -{ - struct gs_port *port; - unsigned long flags; - - func_enter (); - - port = tty->driver_data; - tty = port->port.tty; - if (!tty) - return; - - gs_shutdown_port (port); - spin_lock_irqsave(&port->port.lock, flags); - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE); - port->port.tty = NULL; - port->port.count = 0; - spin_unlock_irqrestore(&port->port.lock, flags); - - wake_up_interruptible(&port->port.open_wait); - func_exit (); -} - - -int gs_block_til_ready(void *port_, struct file * filp) -{ - struct gs_port *gp = port_; - struct tty_port *port = &gp->port; - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - int CD; - struct tty_struct *tty; - unsigned long flags; - - func_enter (); - - if (!port) return 0; - - tty = port->tty; - - gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n"); - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->close_wait); - if (port->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - gs_dprintk (GS_DEBUG_BTR, "after hung up\n"); - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - gs_dprintk (GS_DEBUG_BTR, "after nonblock\n"); - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - - add_wait_queue(&port->open_wait, &wait); - - gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n"); - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) { - port->count--; - } - port->blocked_open++; - spin_unlock_irqrestore(&port->lock, flags); - while (1) { - CD = tty_port_carrier_raised(port); - gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD); - set_current_state (TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->flags & ASYNC_INITIALIZED)) { - if (port->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n", - (int)signal_pending (current), *(long*)(¤t->blocked)); - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n", - port->blocked_open); - set_current_state (TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) { - port->count++; - } - port->blocked_open--; - if (retval == 0) - port->flags |= ASYNC_NORMAL_ACTIVE; - spin_unlock_irqrestore(&port->lock, flags); - func_exit (); - return retval; -} - - -void gs_close(struct tty_struct * tty, struct file * filp) -{ - unsigned long flags; - struct gs_port *port; - - func_enter (); - - port = tty->driver_data; - - if (!port) return; - - if (!port->port.tty) { - /* This seems to happen when this is called from vhangup. */ - gs_dprintk (GS_DEBUG_CLOSE, "gs: Odd: port->port.tty is NULL\n"); - port->port.tty = tty; - } - - spin_lock_irqsave(&port->port.lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->port.lock, flags); - if (port->rd->hungup) - port->rd->hungup (port); - func_exit (); - return; - } - - if ((tty->count == 1) && (port->port.count != 1)) { - printk(KERN_ERR "gs: gs_close port %p: bad port count;" - " tty->count is 1, port count is %d\n", port, port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_ERR "gs: gs_close port %p: bad port count: %d\n", port, port->port.count); - port->port.count = 0; - } - - if (port->port.count) { - gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->port.count); - spin_unlock_irqrestore(&port->port.lock, flags); - func_exit (); - return; - } - port->port.flags |= ASYNC_CLOSING; - - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - /* if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->closing_wait); */ - - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - - spin_lock_irqsave(&port->driver_lock, flags); - port->rd->disable_rx_interrupts (port); - spin_unlock_irqrestore(&port->driver_lock, flags); - spin_unlock_irqrestore(&port->port.lock, flags); - - /* close has no way of returning "EINTR", so discard return value */ - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - gs_wait_tx_flushed (port, port->closing_wait); - - port->port.flags &= ~GS_ACTIVE; - - gs_flush_buffer(tty); - - tty_ldisc_flush(tty); - tty->closing = 0; - - spin_lock_irqsave(&port->driver_lock, flags); - port->event = 0; - port->rd->close (port); - port->rd->shutdown_port (port); - spin_unlock_irqrestore(&port->driver_lock, flags); - - spin_lock_irqsave(&port->port.lock, flags); - port->port.tty = NULL; - - if (port->port.blocked_open) { - if (port->close_delay) { - spin_unlock_irqrestore(&port->port.lock, flags); - msleep_interruptible(jiffies_to_msecs(port->close_delay)); - spin_lock_irqsave(&port->port.lock, flags); - } - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED); - spin_unlock_irqrestore(&port->port.lock, flags); - wake_up_interruptible(&port->port.close_wait); - - func_exit (); -} - - -void gs_set_termios (struct tty_struct * tty, - struct ktermios * old_termios) -{ - struct gs_port *port; - int baudrate, tmp, rv; - struct ktermios *tiosp; - - func_enter(); - - port = tty->driver_data; - - if (!port) return; - if (!port->port.tty) { - /* This seems to happen when this is called after gs_close. */ - gs_dprintk (GS_DEBUG_TERMIOS, "gs: Odd: port->port.tty is NULL\n"); - port->port.tty = tty; - } - - - tiosp = tty->termios; - - if (gs_debug & GS_DEBUG_TERMIOS) { - gs_dprintk (GS_DEBUG_TERMIOS, "termios structure (%p):\n", tiosp); - } - - if(old_termios && (gs_debug & GS_DEBUG_TERMIOS)) { - if(tiosp->c_iflag != old_termios->c_iflag) printk("c_iflag changed\n"); - if(tiosp->c_oflag != old_termios->c_oflag) printk("c_oflag changed\n"); - if(tiosp->c_cflag != old_termios->c_cflag) printk("c_cflag changed\n"); - if(tiosp->c_lflag != old_termios->c_lflag) printk("c_lflag changed\n"); - if(tiosp->c_line != old_termios->c_line) printk("c_line changed\n"); - if(!memcmp(tiosp->c_cc, old_termios->c_cc, NCC)) printk("c_cc changed\n"); - } - - baudrate = tty_get_baud_rate(tty); - - if ((tiosp->c_cflag & CBAUD) == B38400) { - if ( (port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baudrate = 57600; - else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baudrate = 115200; - else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - baudrate = 230400; - else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - baudrate = 460800; - else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) - baudrate = (port->baud_base / port->custom_divisor); - } - - /* I recommend using THIS instead of the mess in termios (and - duplicating the above code). Next we should create a clean - interface towards this variable. If your card supports arbitrary - baud rates, (e.g. CD1400 or 16550 based cards) then everything - will be very easy..... */ - port->baud = baudrate; - - /* Two timer ticks seems enough to wakeup something like SLIP driver */ - /* Baudrate/10 is cps. Divide by HZ to get chars per tick. */ - tmp = (baudrate / 10 / HZ) * 2; - - if (tmp < 0) tmp = 0; - if (tmp >= SERIAL_XMIT_SIZE) tmp = SERIAL_XMIT_SIZE-1; - - port->wakeup_chars = tmp; - - /* We should really wait for the characters to be all sent before - changing the settings. -- CAL */ - rv = gs_wait_tx_flushed (port, MAX_SCHEDULE_TIMEOUT); - if (rv < 0) return /* rv */; - - rv = port->rd->set_real_termios(port); - if (rv < 0) return /* rv */; - - if ((!old_termios || - (old_termios->c_cflag & CRTSCTS)) && - !( tiosp->c_cflag & CRTSCTS)) { - tty->stopped = 0; - gs_start(tty); - } - -#ifdef tytso_patch_94Nov25_1726 - /* This "makes sense", Why is it commented out? */ - - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&port->gs.open_wait); -#endif - - func_exit(); - return /* 0 */; -} - - - -/* Must be called with interrupts enabled */ -int gs_init_port(struct gs_port *port) -{ - unsigned long flags; - - func_enter (); - - if (port->port.flags & ASYNC_INITIALIZED) { - func_exit (); - return 0; - } - if (!port->xmit_buf) { - /* We may sleep in get_zeroed_page() */ - unsigned long tmp; - - tmp = get_zeroed_page(GFP_KERNEL); - spin_lock_irqsave (&port->driver_lock, flags); - if (port->xmit_buf) - free_page (tmp); - else - port->xmit_buf = (unsigned char *) tmp; - spin_unlock_irqrestore(&port->driver_lock, flags); - if (!port->xmit_buf) { - func_exit (); - return -ENOMEM; - } - } - - spin_lock_irqsave (&port->driver_lock, flags); - if (port->port.tty) - clear_bit(TTY_IO_ERROR, &port->port.tty->flags); - mutex_init(&port->port_write_mutex); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore(&port->driver_lock, flags); - gs_set_termios(port->port.tty, NULL); - spin_lock_irqsave (&port->driver_lock, flags); - port->port.flags |= ASYNC_INITIALIZED; - port->port.flags &= ~GS_TX_INTEN; - - spin_unlock_irqrestore(&port->driver_lock, flags); - func_exit (); - return 0; -} - - -int gs_setserial(struct gs_port *port, struct serial_struct __user *sp) -{ - struct serial_struct sio; - - if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) - return(-EFAULT); - - if (!capable(CAP_SYS_ADMIN)) { - if ((sio.baud_base != port->baud_base) || - (sio.close_delay != port->close_delay) || - ((sio.flags & ~ASYNC_USR_MASK) != - (port->port.flags & ~ASYNC_USR_MASK))) - return(-EPERM); - } - - port->port.flags = (port->port.flags & ~ASYNC_USR_MASK) | - (sio.flags & ASYNC_USR_MASK); - - port->baud_base = sio.baud_base; - port->close_delay = sio.close_delay; - port->closing_wait = sio.closing_wait; - port->custom_divisor = sio.custom_divisor; - - gs_set_termios (port->port.tty, NULL); - - return 0; -} - - -/*****************************************************************************/ - -/* - * Generate the serial struct info. - */ - -int gs_getserial(struct gs_port *port, struct serial_struct __user *sp) -{ - struct serial_struct sio; - - memset(&sio, 0, sizeof(struct serial_struct)); - sio.flags = port->port.flags; - sio.baud_base = port->baud_base; - sio.close_delay = port->close_delay; - sio.closing_wait = port->closing_wait; - sio.custom_divisor = port->custom_divisor; - sio.hub6 = 0; - - /* If you want you can override these. */ - sio.type = PORT_UNKNOWN; - sio.xmit_fifo_size = -1; - sio.line = -1; - sio.port = -1; - sio.irq = -1; - - if (port->rd->getserial) - port->rd->getserial (port, &sio); - - if (copy_to_user(sp, &sio, sizeof(struct serial_struct))) - return -EFAULT; - return 0; - -} - - -void gs_got_break(struct gs_port *port) -{ - func_enter (); - - tty_insert_flip_char(port->port.tty, 0, TTY_BREAK); - tty_schedule_flip(port->port.tty); - if (port->port.flags & ASYNC_SAK) { - do_SAK (port->port.tty); - } - - func_exit (); -} - - -EXPORT_SYMBOL(gs_put_char); -EXPORT_SYMBOL(gs_write); -EXPORT_SYMBOL(gs_write_room); -EXPORT_SYMBOL(gs_chars_in_buffer); -EXPORT_SYMBOL(gs_flush_buffer); -EXPORT_SYMBOL(gs_flush_chars); -EXPORT_SYMBOL(gs_stop); -EXPORT_SYMBOL(gs_start); -EXPORT_SYMBOL(gs_hangup); -EXPORT_SYMBOL(gs_block_til_ready); -EXPORT_SYMBOL(gs_close); -EXPORT_SYMBOL(gs_set_termios); -EXPORT_SYMBOL(gs_init_port); -EXPORT_SYMBOL(gs_setserial); -EXPORT_SYMBOL(gs_getserial); -EXPORT_SYMBOL(gs_got_break); - -MODULE_LICENSE("GPL"); diff --git a/drivers/char/rio/Makefile b/drivers/char/rio/Makefile deleted file mode 100644 index 1661875..0000000 --- a/drivers/char/rio/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux rio-subsystem. -# -# (C) R.E.Wolff@BitWizard.nl -# -# This file is GPL. See other files for the full Blurb. I'm lazy today. -# - -obj-$(CONFIG_RIO) += rio.o - -rio-y := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \ - rioparam.o rioroute.o riotable.o riotty.o diff --git a/drivers/char/rio/board.h b/drivers/char/rio/board.h deleted file mode 100644 index bdea633..0000000 --- a/drivers/char/rio/board.h +++ /dev/null @@ -1,132 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : board.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:07 -** Retrieved : 11/6/98 11:34:20 -** -** ident @(#)board.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_board_h__ -#define __rio_board_h__ - -/* -** board.h contains the definitions for the *hardware* of the host cards. -** It describes the memory overlay for the dual port RAM area. -*/ - -#define DP_SRAM1_SIZE 0x7C00 -#define DP_SRAM2_SIZE 0x0200 -#define DP_SRAM3_SIZE 0x7000 -#define DP_SCRATCH_SIZE 0x1000 -#define DP_PARMMAP_ADDR 0x01FE /* offset into SRAM2 */ -#define DP_STARTUP_ADDR 0x01F8 /* offset into SRAM2 */ - -/* -** The shape of the Host Control area, at offset 0x7C00, Write Only -*/ -struct s_Ctrl { - u8 DpCtl; /* 7C00 */ - u8 Dp_Unused2_[127]; - u8 DpIntSet; /* 7C80 */ - u8 Dp_Unused3_[127]; - u8 DpTpuReset; /* 7D00 */ - u8 Dp_Unused4_[127]; - u8 DpIntReset; /* 7D80 */ - u8 Dp_Unused5_[127]; -}; - -/* -** The PROM data area on the host (0x7C00), Read Only -*/ -struct s_Prom { - u16 DpSlxCode[2]; - u16 DpRev; - u16 Dp_Unused6_; - u16 DpUniq[4]; - u16 DpJahre; - u16 DpWoche; - u16 DpHwFeature[5]; - u16 DpOemId; - u16 DpSiggy[16]; -}; - -/* -** Union of the Ctrl and Prom areas -*/ -union u_CtrlProm { /* This is the control/PROM area (0x7C00) */ - struct s_Ctrl DpCtrl; - struct s_Prom DpProm; -}; - -/* -** The top end of memory! -*/ -struct s_ParmMapS { /* Area containing Parm Map Pointer */ - u8 Dp_Unused8_[DP_PARMMAP_ADDR]; - u16 DpParmMapAd; -}; - -struct s_StartUpS { - u8 Dp_Unused9_[DP_STARTUP_ADDR]; - u8 Dp_LongJump[0x4]; - u8 Dp_Unused10_[2]; - u8 Dp_ShortJump[0x2]; -}; - -union u_Sram2ParmMap { /* This is the top of memory (0x7E00-0x7FFF) */ - u8 DpSramMem[DP_SRAM2_SIZE]; - struct s_ParmMapS DpParmMapS; - struct s_StartUpS DpStartUpS; -}; - -/* -** This is the DP RAM overlay. -*/ -struct DpRam { - u8 DpSram1[DP_SRAM1_SIZE]; /* 0000 - 7BFF */ - union u_CtrlProm DpCtrlProm; /* 7C00 - 7DFF */ - union u_Sram2ParmMap DpSram2ParmMap; /* 7E00 - 7FFF */ - u8 DpScratch[DP_SCRATCH_SIZE]; /* 8000 - 8FFF */ - u8 DpSram3[DP_SRAM3_SIZE]; /* 9000 - FFFF */ -}; - -#define DpControl DpCtrlProm.DpCtrl.DpCtl -#define DpSetInt DpCtrlProm.DpCtrl.DpIntSet -#define DpResetTpu DpCtrlProm.DpCtrl.DpTpuReset -#define DpResetInt DpCtrlProm.DpCtrl.DpIntReset - -#define DpSlx DpCtrlProm.DpProm.DpSlxCode -#define DpRevision DpCtrlProm.DpProm.DpRev -#define DpUnique DpCtrlProm.DpProm.DpUniq -#define DpYear DpCtrlProm.DpProm.DpJahre -#define DpWeek DpCtrlProm.DpProm.DpWoche -#define DpSignature DpCtrlProm.DpProm.DpSiggy - -#define DpParmMapR DpSram2ParmMap.DpParmMapS.DpParmMapAd -#define DpSram2 DpSram2ParmMap.DpSramMem - -#endif diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h deleted file mode 100644 index 5ab5167..0000000 --- a/drivers/char/rio/cirrus.h +++ /dev/null @@ -1,210 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* CIRRUS.H ******* - ******* ******* - **************************************************************************** - - Author : Jeremy Rolls - Date : 3 Aug 1990 - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _cirrus_h -#define _cirrus_h 1 - -/* Bit fields for particular registers shared with driver */ - -/* COR1 - driver and RTA */ -#define RIOC_COR1_ODD 0x80 /* Odd parity */ -#define RIOC_COR1_EVEN 0x00 /* Even parity */ -#define RIOC_COR1_NOP 0x00 /* No parity */ -#define RIOC_COR1_FORCE 0x20 /* Force parity */ -#define RIOC_COR1_NORMAL 0x40 /* With parity */ -#define RIOC_COR1_1STOP 0x00 /* 1 stop bit */ -#define RIOC_COR1_15STOP 0x04 /* 1.5 stop bits */ -#define RIOC_COR1_2STOP 0x08 /* 2 stop bits */ -#define RIOC_COR1_5BITS 0x00 /* 5 data bits */ -#define RIOC_COR1_6BITS 0x01 /* 6 data bits */ -#define RIOC_COR1_7BITS 0x02 /* 7 data bits */ -#define RIOC_COR1_8BITS 0x03 /* 8 data bits */ - -#define RIOC_COR1_HOST 0xef /* Safe host bits */ - -/* RTA only */ -#define RIOC_COR1_CINPCK 0x00 /* Check parity of received characters */ -#define RIOC_COR1_CNINPCK 0x10 /* Don't check parity */ - -/* COR2 bits for both RTA and driver use */ -#define RIOC_COR2_IXANY 0x80 /* IXANY - any character is XON */ -#define RIOC_COR2_IXON 0x40 /* IXON - enable tx soft flowcontrol */ -#define RIOC_COR2_RTSFLOW 0x02 /* Enable tx hardware flow control */ - -/* Additional driver bits */ -#define RIOC_COR2_HUPCL 0x20 /* Hang up on close */ -#define RIOC_COR2_CTSFLOW 0x04 /* Enable rx hardware flow control */ -#define RIOC_COR2_IXOFF 0x01 /* Enable rx software flow control */ -#define RIOC_COR2_DTRFLOW 0x08 /* Enable tx hardware flow control */ - -/* RTA use only */ -#define RIOC_COR2_ETC 0x20 /* Embedded transmit options */ -#define RIOC_COR2_LOCAL 0x10 /* Local loopback mode */ -#define RIOC_COR2_REMOTE 0x08 /* Remote loopback mode */ -#define RIOC_COR2_HOST 0xc2 /* Safe host bits */ - -/* COR3 - RTA use only */ -#define RIOC_COR3_SCDRNG 0x80 /* Enable special char detect for range */ -#define RIOC_COR3_SCD34 0x40 /* Special character detect for SCHR's 3 + 4 */ -#define RIOC_COR3_FCT 0x20 /* Flow control transparency */ -#define RIOC_COR3_SCD12 0x10 /* Special character detect for SCHR's 1 + 2 */ -#define RIOC_COR3_FIFO12 0x0c /* 12 chars for receive FIFO threshold */ -#define RIOC_COR3_FIFO10 0x0a /* 10 chars for receive FIFO threshold */ -#define RIOC_COR3_FIFO8 0x08 /* 8 chars for receive FIFO threshold */ -#define RIOC_COR3_FIFO6 0x06 /* 6 chars for receive FIFO threshold */ - -#define RIOC_COR3_THRESHOLD RIOC_COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */ - -#define RIOC_COR3_DEFAULT (RIOC_COR3_FCT | RIOC_COR3_THRESHOLD) - /* Default bits for COR3 */ - -/* COR4 driver and RTA use */ -#define RIOC_COR4_IGNCR 0x80 /* Throw away CR's on input */ -#define RIOC_COR4_ICRNL 0x40 /* Map CR -> NL on input */ -#define RIOC_COR4_INLCR 0x20 /* Map NL -> CR on input */ -#define RIOC_COR4_IGNBRK 0x10 /* Ignore Break */ -#define RIOC_COR4_NBRKINT 0x08 /* No interrupt on break (-BRKINT) */ -#define RIOC_COR4_RAISEMOD 0x01 /* Raise modem output lines on non-zero baud */ - - -/* COR4 driver only */ -#define RIOC_COR4_IGNPAR 0x04 /* IGNPAR (ignore characters with errors) */ -#define RIOC_COR4_PARMRK 0x02 /* PARMRK */ - -#define RIOC_COR4_HOST 0xf8 /* Safe host bits */ - -/* COR4 RTA only */ -#define RIOC_COR4_CIGNPAR 0x02 /* Thrown away bad characters */ -#define RIOC_COR4_CPARMRK 0x04 /* PARMRK characters */ -#define RIOC_COR4_CNPARMRK 0x03 /* Don't PARMRK */ - -/* COR5 driver and RTA use */ -#define RIOC_COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */ -#define RIOC_COR5_LNE 0x40 /* Enable LNEXT processing */ -#define RIOC_COR5_CMOE 0x20 /* Match good and errored characters */ -#define RIOC_COR5_ONLCR 0x02 /* NL -> CR NL on output */ -#define RIOC_COR5_OCRNL 0x01 /* CR -> NL on output */ - -/* -** Spare bits - these are not used in the CIRRUS registers, so we use -** them to set various other features. -*/ -/* -** tstop and tbusy indication -*/ -#define RIOC_COR5_TSTATE_ON 0x08 /* Turn on monitoring of tbusy and tstop */ -#define RIOC_COR5_TSTATE_OFF 0x04 /* Turn off monitoring of tbusy and tstop */ -/* -** TAB3 -*/ -#define RIOC_COR5_TAB3 0x10 /* TAB3 mode */ - -#define RIOC_COR5_HOST 0xc3 /* Safe host bits */ - -/* CCSR */ -#define RIOC_CCSR_TXFLOFF 0x04 /* Tx is xoffed */ - -/* MSVR1 */ -/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the - RTA. This is because otherwise DCD would get lost on the 1 parallel / 3 - serial option. -*/ -#define RIOC_MSVR1_CD 0x80 /* CD (DSR on Cirrus) */ -#define RIOC_MSVR1_RTS 0x40 /* RTS (CTS on Cirrus) */ -#define RIOC_MSVR1_RI 0x20 /* RI */ -#define RIOC_MSVR1_DTR 0x10 /* DTR (CD on Cirrus) */ -#define RIOC_MSVR1_CTS 0x01 /* CTS output pin (RTS on Cirrus) */ -/* Next two used to indicate state of tbusy and tstop to driver */ -#define RIOC_MSVR1_TSTOP 0x08 /* Set if port flow controlled */ -#define RIOC_MSVR1_TEMPTY 0x04 /* Set if port tx buffer empty */ - -#define RIOC_MSVR1_HOST 0xf3 /* The bits the host wants */ - -/* Defines for the subscripts of a CONFIG packet */ -#define RIOC_CONFIG_COR1 1 /* Option register 1 */ -#define RIOC_CONFIG_COR2 2 /* Option register 2 */ -#define RIOC_CONFIG_COR4 3 /* Option register 4 */ -#define RIOC_CONFIG_COR5 4 /* Option register 5 */ -#define RIOC_CONFIG_TXXON 5 /* Tx XON character */ -#define RIOC_CONFIG_TXXOFF 6 /* Tx XOFF character */ -#define RIOC_CONFIG_RXXON 7 /* Rx XON character */ -#define RIOC_CONFIG_RXXOFF 8 /* Rx XOFF character */ -#define RIOC_CONFIG_LNEXT 9 /* LNEXT character */ -#define RIOC_CONFIG_TXBAUD 10 /* Tx baud rate */ -#define RIOC_CONFIG_RXBAUD 11 /* Rx baud rate */ - -#define RIOC_PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */ - -/* Packet types going from Host to remote - with the exception of OPEN, MOPEN, - CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not - be used -*/ -#define RIOC_OPEN 0x00 /* Open a port */ -#define RIOC_CONFIG 0x01 /* Configure a port */ -#define RIOC_MOPEN 0x02 /* Modem open (block for DCD) */ -#define RIOC_CLOSE 0x03 /* Close a port */ -#define RIOC_WFLUSH (0x04 | RIOC_PRE_EMPTIVE) /* Write flush */ -#define RIOC_RFLUSH (0x05 | RIOC_PRE_EMPTIVE) /* Read flush */ -#define RIOC_RESUME (0x06 | RIOC_PRE_EMPTIVE) /* Resume if xoffed */ -#define RIOC_SBREAK 0x07 /* Start break */ -#define RIOC_EBREAK 0x08 /* End break */ -#define RIOC_SUSPEND (0x09 | RIOC_PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */ -#define RIOC_FCLOSE (0x0a | RIOC_PRE_EMPTIVE) /* Force close */ -#define RIOC_XPRINT 0x0b /* Xprint packet */ -#define RIOC_MBIS (0x0c | RIOC_PRE_EMPTIVE) /* Set modem lines */ -#define RIOC_MBIC (0x0d | RIOC_PRE_EMPTIVE) /* Clear modem lines */ -#define RIOC_MSET (0x0e | RIOC_PRE_EMPTIVE) /* Set modem lines */ -#define RIOC_PCLOSE 0x0f /* Pseudo close - Leaves rx/tx enabled */ -#define RIOC_MGET (0x10 | RIOC_PRE_EMPTIVE) /* Force update of modem status */ -#define RIOC_MEMDUMP (0x11 | RIOC_PRE_EMPTIVE) /* Send back mem from addr supplied */ -#define RIOC_READ_REGISTER (0x12 | RIOC_PRE_EMPTIVE) /* Read CD1400 register (debug) */ - -/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS - use data[4] / data[3] to indicate current state and modem status respectively -*/ - -#define RIOC_COMPLETE (0x20 | RIOC_PRE_EMPTIVE) - /* Command complete */ -#define RIOC_BREAK_RECEIVED (0x21 | RIOC_PRE_EMPTIVE) - /* Break received */ -#define RIOC_MODEM_STATUS (0x22 | RIOC_PRE_EMPTIVE) - /* Change in modem status */ - -/* "Command" packet that could go either way - handshake wake-up */ -#define RIOC_HANDSHAKE (0x23 | RIOC_PRE_EMPTIVE) - /* Wake-up to HOST / RTA */ - -#endif diff --git a/drivers/char/rio/cmdblk.h b/drivers/char/rio/cmdblk.h deleted file mode 100644 index 9ed4f86..0000000 --- a/drivers/char/rio/cmdblk.h +++ /dev/null @@ -1,53 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : cmdblk.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:09 -** Retrieved : 11/6/98 11:34:20 -** -** ident @(#)cmdblk.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_cmdblk_h__ -#define __rio_cmdblk_h__ - -/* -** the structure of a command block, used to queue commands destined for -** a rup. -*/ - -struct CmdBlk { - struct CmdBlk *NextP; /* Pointer to next command block */ - struct PKT Packet; /* A packet, to copy to the rup */ - /* The func to call to check if OK */ - int (*PreFuncP) (unsigned long, struct CmdBlk *); - int PreArg; /* The arg for the func */ - /* The func to call when completed */ - int (*PostFuncP) (unsigned long, struct CmdBlk *); - int PostArg; /* The arg for the func */ -}; - -#define NUM_RIO_CMD_BLKS (3 * (MAX_RUP * 4 + LINKS_PER_UNIT * 4)) -#endif diff --git a/drivers/char/rio/cmdpkt.h b/drivers/char/rio/cmdpkt.h deleted file mode 100644 index c1e7a27..0000000 --- a/drivers/char/rio/cmdpkt.h +++ /dev/null @@ -1,177 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : cmdpkt.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:09 -** Retrieved : 11/6/98 11:34:20 -** -** ident @(#)cmdpkt.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ -#ifndef __rio_cmdpkt_h__ -#define __rio_cmdpkt_h__ - -/* -** overlays for the data area of a packet. Used in both directions -** (to build a packet to send, and to interpret a packet that arrives) -** and is very inconvenient for MIPS, so they appear as two separate -** structures - those used for modifying/reading packets on the card -** and those for modifying/reading packets in real memory, which have an _M -** suffix. -*/ - -#define RTA_BOOT_DATA_SIZE (PKT_MAX_DATA_LEN-2) - -/* -** The boot information packet looks like this: -** This structure overlays a PktCmd->CmdData structure, and so starts -** at Data[2] in the actual pkt! -*/ -struct BootSequence { - u16 NumPackets; - u16 LoadBase; - u16 CodeSize; -}; - -#define BOOT_SEQUENCE_LEN 8 - -struct SamTop { - u8 Unit; - u8 Link; -}; - -struct CmdHdr { - u8 PcCommand; - union { - u8 PcPhbNum; - u8 PcLinkNum; - u8 PcIDNum; - } U0; -}; - - -struct PktCmd { - union { - struct { - struct CmdHdr CmdHdr; - struct BootSequence PcBootSequence; - } S1; - struct { - u16 PcSequence; - u8 PcBootData[RTA_BOOT_DATA_SIZE]; - } S2; - struct { - u16 __crud__; - u8 PcUniqNum[4]; /* this is really a uint. */ - u8 PcModuleTypes; /* what modules are fitted */ - } S3; - struct { - struct CmdHdr CmdHdr; - u8 __undefined__; - u8 PcModemStatus; - u8 PcPortStatus; - u8 PcSubCommand; /* commands like mem or register dump */ - u16 PcSubAddr; /* Address for command */ - u8 PcSubData[64]; /* Date area for command */ - } S4; - struct { - struct CmdHdr CmdHdr; - u8 PcCommandText[1]; - u8 __crud__[20]; - u8 PcIDNum2; /* It had to go somewhere! */ - } S5; - struct { - struct CmdHdr CmdHdr; - struct SamTop Topology[LINKS_PER_UNIT]; - } S6; - } U1; -}; - -struct PktCmd_M { - union { - struct { - struct { - u8 PcCommand; - union { - u8 PcPhbNum; - u8 PcLinkNum; - u8 PcIDNum; - } U0; - } CmdHdr; - struct { - u16 NumPackets; - u16 LoadBase; - u16 CodeSize; - } PcBootSequence; - } S1; - struct { - u16 PcSequence; - u8 PcBootData[RTA_BOOT_DATA_SIZE]; - } S2; - struct { - u16 __crud__; - u8 PcUniqNum[4]; /* this is really a uint. */ - u8 PcModuleTypes; /* what modules are fitted */ - } S3; - struct { - u16 __cmd_hdr__; - u8 __undefined__; - u8 PcModemStatus; - u8 PcPortStatus; - u8 PcSubCommand; - u16 PcSubAddr; - u8 PcSubData[64]; - } S4; - struct { - u16 __cmd_hdr__; - u8 PcCommandText[1]; - u8 __crud__[20]; - u8 PcIDNum2; /* Tacked on end */ - } S5; - struct { - u16 __cmd_hdr__; - struct Top Topology[LINKS_PER_UNIT]; - } S6; - } U1; -}; - -#define Command U1.S1.CmdHdr.PcCommand -#define PhbNum U1.S1.CmdHdr.U0.PcPhbNum -#define IDNum U1.S1.CmdHdr.U0.PcIDNum -#define IDNum2 U1.S5.PcIDNum2 -#define LinkNum U1.S1.CmdHdr.U0.PcLinkNum -#define Sequence U1.S2.PcSequence -#define BootData U1.S2.PcBootData -#define BootSequence U1.S1.PcBootSequence -#define UniqNum U1.S3.PcUniqNum -#define ModemStatus U1.S4.PcModemStatus -#define PortStatus U1.S4.PcPortStatus -#define SubCommand U1.S4.PcSubCommand -#define SubAddr U1.S4.PcSubAddr -#define SubData U1.S4.PcSubData -#define CommandText U1.S5.PcCommandText -#define RouteTopology U1.S6.Topology -#define ModuleTypes U1.S3.PcModuleTypes - -#endif diff --git a/drivers/char/rio/daemon.h b/drivers/char/rio/daemon.h deleted file mode 100644 index 4af9032..0000000 --- a/drivers/char/rio/daemon.h +++ /dev/null @@ -1,307 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : daemon.h -** SID : 1.3 -** Last Modified : 11/6/98 11:34:09 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)daemon.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_daemon_h__ -#define __rio_daemon_h__ - - -/* -** structures used on /dev/rio -*/ - -struct Error { - unsigned int Error; - unsigned int Entry; - unsigned int Other; -}; - -struct DownLoad { - char __user *DataP; - unsigned int Count; - unsigned int ProductCode; -}; - -/* -** A few constants.... -*/ -#ifndef MAX_VERSION_LEN -#define MAX_VERSION_LEN 256 -#endif - -#ifndef MAX_XP_CTRL_LEN -#define MAX_XP_CTRL_LEN 16 /* ALSO IN PORT.H */ -#endif - -struct PortSetup { - unsigned int From; /* Set/Clear XP & IXANY Control from this port.... */ - unsigned int To; /* .... to this port */ - unsigned int XpCps; /* at this speed */ - char XpOn[MAX_XP_CTRL_LEN]; /* this is the start string */ - char XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */ - u8 IxAny; /* enable/disable IXANY */ - u8 IxOn; /* enable/disable IXON */ - u8 Lock; /* lock port params */ - u8 Store; /* store params across closes */ - u8 Drain; /* close only when drained */ -}; - -struct LpbReq { - unsigned int Host; - unsigned int Link; - struct LPB __user *LpbP; -}; - -struct RupReq { - unsigned int HostNum; - unsigned int RupNum; - struct RUP __user *RupP; -}; - -struct PortReq { - unsigned int SysPort; - struct Port __user *PortP; -}; - -struct StreamInfo { - unsigned int SysPort; - int RQueue; - int WQueue; -}; - -struct HostReq { - unsigned int HostNum; - struct Host __user *HostP; -}; - -struct HostDpRam { - unsigned int HostNum; - struct DpRam __user *DpRamP; -}; - -struct DebugCtrl { - unsigned int SysPort; - unsigned int Debug; - unsigned int Wait; -}; - -struct MapInfo { - unsigned int FirstPort; /* 8 ports, starting from this (tty) number */ - unsigned int RtaUnique; /* reside on this RTA (unique number) */ -}; - -struct MapIn { - unsigned int NumEntries; /* How many port sets are we mapping? */ - struct MapInfo *MapInfoP; /* Pointer to (user space) info */ -}; - -struct SendPack { - unsigned int PortNum; - unsigned char Len; - unsigned char Data[PKT_MAX_DATA_LEN]; -}; - -struct SpecialRupCmd { - struct PKT Packet; - unsigned short Host; - unsigned short RupNum; -}; - -struct IdentifyRta { - unsigned long RtaUnique; - u8 ID; -}; - -struct KillNeighbour { - unsigned long UniqueNum; - u8 Link; -}; - -struct rioVersion { - char version[MAX_VERSION_LEN]; - char relid[MAX_VERSION_LEN]; - int buildLevel; - char buildDate[MAX_VERSION_LEN]; -}; - - -/* -** RIOC commands are for the daemon type operations -** -** 09.12.1998 ARG - ESIL 0776 part fix -** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a -** #ifndef here first. -** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now -** allowed to be used by customers. -*/ -#ifndef RIOC -#define RIOC ('R'<<8)|('i'<<16)|('o'<<24) -#endif - -/* -** Boot stuff -*/ -#define RIO_GET_TABLE (RIOC | 100) -#define RIO_PUT_TABLE (RIOC | 101) -#define RIO_ASSIGN_RTA (RIOC | 102) -#define RIO_DELETE_RTA (RIOC | 103) -#define RIO_HOST_FOAD (RIOC | 104) -#define RIO_QUICK_CHECK (RIOC | 105) -#define RIO_SIGNALS_ON (RIOC | 106) -#define RIO_SIGNALS_OFF (RIOC | 107) -#define RIO_CHANGE_NAME (RIOC | 108) -#define RIO_DOWNLOAD (RIOC | 109) -#define RIO_GET_LOG (RIOC | 110) -#define RIO_SETUP_PORTS (RIOC | 111) -#define RIO_ALL_MODEM (RIOC | 112) - -/* -** card state, debug stuff -*/ -#define RIO_NUM_HOSTS (RIOC | 120) -#define RIO_HOST_LPB (RIOC | 121) -#define RIO_HOST_RUP (RIOC | 122) -#define RIO_HOST_PORT (RIOC | 123) -#define RIO_PARMS (RIOC | 124) -#define RIO_HOST_REQ (RIOC | 125) -#define RIO_READ_CONFIG (RIOC | 126) -#define RIO_SET_CONFIG (RIOC | 127) -#define RIO_VERSID (RIOC | 128) -#define RIO_FLAGS (RIOC | 129) -#define RIO_SETDEBUG (RIOC | 130) -#define RIO_GETDEBUG (RIOC | 131) -#define RIO_READ_LEVELS (RIOC | 132) -#define RIO_SET_FAST_BUS (RIOC | 133) -#define RIO_SET_SLOW_BUS (RIOC | 134) -#define RIO_SET_BYTE_MODE (RIOC | 135) -#define RIO_SET_WORD_MODE (RIOC | 136) -#define RIO_STREAM_INFO (RIOC | 137) -#define RIO_START_POLLER (RIOC | 138) -#define RIO_STOP_POLLER (RIOC | 139) -#define RIO_LAST_ERROR (RIOC | 140) -#define RIO_TICK (RIOC | 141) -#define RIO_TOCK (RIOC | 241) /* I did this on purpose, you know. */ -#define RIO_SEND_PACKET (RIOC | 142) -#define RIO_SET_BUSY (RIOC | 143) -#define SPECIAL_RUP_CMD (RIOC | 144) -#define RIO_FOAD_RTA (RIOC | 145) -#define RIO_ZOMBIE_RTA (RIOC | 146) -#define RIO_IDENTIFY_RTA (RIOC | 147) -#define RIO_KILL_NEIGHBOUR (RIOC | 148) -#define RIO_DEBUG_MEM (RIOC | 149) -/* -** 150 - 167 used..... See below -*/ -#define RIO_GET_PORT_SETUP (RIOC | 168) -#define RIO_RESUME (RIOC | 169) -#define RIO_MESG (RIOC | 170) -#define RIO_NO_MESG (RIOC | 171) -#define RIO_WHAT_MESG (RIOC | 172) -#define RIO_HOST_DPRAM (RIOC | 173) -#define RIO_MAP_B50_TO_50 (RIOC | 174) -#define RIO_MAP_B50_TO_57600 (RIOC | 175) -#define RIO_MAP_B110_TO_110 (RIOC | 176) -#define RIO_MAP_B110_TO_115200 (RIOC | 177) -#define RIO_GET_PORT_PARAMS (RIOC | 178) -#define RIO_SET_PORT_PARAMS (RIOC | 179) -#define RIO_GET_PORT_TTY (RIOC | 180) -#define RIO_SET_PORT_TTY (RIOC | 181) -#define RIO_SYSLOG_ONLY (RIOC | 182) -#define RIO_SYSLOG_CONS (RIOC | 183) -#define RIO_CONS_ONLY (RIOC | 184) -#define RIO_BLOCK_OPENS (RIOC | 185) - -/* -** 02.03.1999 ARG - ESIL 0820 fix : -** RIOBootMode is no longer use by the driver, so these ioctls -** are now obsolete : -** -#define RIO_GET_BOOT_MODE (RIOC | 186) -#define RIO_SET_BOOT_MODE (RIOC | 187) -** -*/ - -#define RIO_MEM_DUMP (RIOC | 189) -#define RIO_READ_REGISTER (RIOC | 190) -#define RIO_GET_MODTYPE (RIOC | 191) -#define RIO_SET_TIMER (RIOC | 192) -#define RIO_READ_CHECK (RIOC | 196) -#define RIO_WAITING_FOR_RESTART (RIOC | 197) -#define RIO_BIND_RTA (RIOC | 198) -#define RIO_GET_BINDINGS (RIOC | 199) -#define RIO_PUT_BINDINGS (RIOC | 200) - -#define RIO_MAKE_DEV (RIOC | 201) -#define RIO_MINOR (RIOC | 202) - -#define RIO_IDENTIFY_DRIVER (RIOC | 203) -#define RIO_DISPLAY_HOST_CFG (RIOC | 204) - - -/* -** MAKE_DEV / MINOR stuff -*/ -#define RIO_DEV_DIRECT 0x0000 -#define RIO_DEV_MODEM 0x0200 -#define RIO_DEV_XPRINT 0x0400 -#define RIO_DEV_MASK 0x0600 - -/* -** port management, xprint stuff -*/ -#define rIOCN(N) (RIOC|(N)) -#define rIOCR(N,T) (RIOC|(N)) -#define rIOCW(N,T) (RIOC|(N)) - -#define RIO_GET_XP_ON rIOCR(150,char[16]) /* start xprint string */ -#define RIO_SET_XP_ON rIOCW(151,char[16]) -#define RIO_GET_XP_OFF rIOCR(152,char[16]) /* finish xprint string */ -#define RIO_SET_XP_OFF rIOCW(153,char[16]) -#define RIO_GET_XP_CPS rIOCR(154,int) /* xprint CPS */ -#define RIO_SET_XP_CPS rIOCW(155,int) -#define RIO_GET_IXANY rIOCR(156,int) /* ixany allowed? */ -#define RIO_SET_IXANY rIOCW(157,int) -#define RIO_SET_IXANY_ON rIOCN(158) /* allow ixany */ -#define RIO_SET_IXANY_OFF rIOCN(159) /* disallow ixany */ -#define RIO_GET_MODEM rIOCR(160,int) /* port is modem/direct line? */ -#define RIO_SET_MODEM rIOCW(161,int) -#define RIO_SET_MODEM_ON rIOCN(162) /* port is a modem */ -#define RIO_SET_MODEM_OFF rIOCN(163) /* port is direct */ -#define RIO_GET_IXON rIOCR(164,int) /* ixon allowed? */ -#define RIO_SET_IXON rIOCW(165,int) -#define RIO_SET_IXON_ON rIOCN(166) /* allow ixon */ -#define RIO_SET_IXON_OFF rIOCN(167) /* disallow ixon */ - -#define RIO_GET_SIVIEW ((('s')<<8) | 106) /* backwards compatible with SI */ - -#define RIO_IOCTL_UNKNOWN -2 - -#endif diff --git a/drivers/char/rio/errors.h b/drivers/char/rio/errors.h deleted file mode 100644 index bdb0523..0000000 --- a/drivers/char/rio/errors.h +++ /dev/null @@ -1,98 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : errors.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:10 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)errors.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_errors_h__ -#define __rio_errors_h__ - -/* -** error codes -*/ - -#define NOTHING_WRONG_AT_ALL 0 -#define BAD_CHARACTER_IN_NAME 1 -#define TABLE_ENTRY_ISNT_PROPERLY_NULL 2 -#define UNKNOWN_HOST_NUMBER 3 -#define ZERO_RTA_ID 4 -#define BAD_RTA_ID 5 -#define DUPLICATED_RTA_ID 6 -#define DUPLICATE_UNIQUE_NUMBER 7 -#define BAD_TTY_NUMBER 8 -#define TTY_NUMBER_IN_USE 9 -#define NAME_USED_TWICE 10 -#define HOST_ID_NOT_ZERO 11 -#define BOOT_IN_PROGRESS 12 -#define COPYIN_FAILED 13 -#define HOST_FILE_TOO_LARGE 14 -#define COPYOUT_FAILED 15 -#define NOT_SUPER_USER 16 -#define RIO_ALREADY_POLLING 17 - -#define ID_NUMBER_OUT_OF_RANGE 18 -#define PORT_NUMBER_OUT_OF_RANGE 19 -#define HOST_NUMBER_OUT_OF_RANGE 20 -#define RUP_NUMBER_OUT_OF_RANGE 21 -#define TTY_NUMBER_OUT_OF_RANGE 22 -#define LINK_NUMBER_OUT_OF_RANGE 23 - -#define HOST_NOT_RUNNING 24 -#define IOCTL_COMMAND_UNKNOWN 25 -#define RIO_SYSTEM_HALTED 26 -#define WAIT_FOR_DRAIN_BROKEN 27 -#define PORT_NOT_MAPPED_INTO_SYSTEM 28 -#define EXCLUSIVE_USE_SET 29 -#define WAIT_FOR_NOT_CLOSING_BROKEN 30 -#define WAIT_FOR_PORT_TO_OPEN_BROKEN 31 -#define WAIT_FOR_CARRIER_BROKEN 32 -#define WAIT_FOR_NOT_IN_USE_BROKEN 33 -#define WAIT_FOR_CAN_ADD_COMMAND_BROKEN 34 -#define WAIT_FOR_ADD_COMMAND_BROKEN 35 -#define WAIT_FOR_NOT_PARAM_BROKEN 36 -#define WAIT_FOR_RETRY_BROKEN 37 -#define HOST_HAS_ALREADY_BEEN_BOOTED 38 -#define UNIT_IS_IN_USE 39 -#define COULDNT_FIND_ENTRY 40 -#define RTA_UNIQUE_NUMBER_ZERO 41 -#define CLOSE_COMMAND_FAILED 42 -#define WAIT_FOR_CLOSE_BROKEN 43 -#define CPS_VALUE_OUT_OF_RANGE 44 -#define ID_ALREADY_IN_USE 45 -#define SIGNALS_ALREADY_SET 46 -#define NOT_RECEIVING_PROCESS 47 -#define RTA_NUMBER_WRONG 48 -#define NO_SUCH_PRODUCT 49 -#define HOST_SYSPORT_BAD 50 -#define ID_NOT_TENTATIVE 51 -#define XPRINT_CPS_OUT_OF_RANGE 52 -#define NOT_ENOUGH_CORE_FOR_PCI_COPY 53 - - -#endif /* __rio_errors_h__ */ diff --git a/drivers/char/rio/func.h b/drivers/char/rio/func.h deleted file mode 100644 index 078d44f..0000000 --- a/drivers/char/rio/func.h +++ /dev/null @@ -1,143 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : func.h -** SID : 1.3 -** Last Modified : 11/6/98 11:34:10 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)func.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __func_h_def -#define __func_h_def - -#include <linux/kdev_t.h> - -/* rioboot.c */ -int RIOBootCodeRTA(struct rio_info *, struct DownLoad *); -int RIOBootCodeHOST(struct rio_info *, struct DownLoad *); -int RIOBootCodeUNKNOWN(struct rio_info *, struct DownLoad *); -void msec_timeout(struct Host *); -int RIOBootRup(struct rio_info *, unsigned int, struct Host *, struct PKT __iomem *); -int RIOBootOk(struct rio_info *, struct Host *, unsigned long); -int RIORtaBound(struct rio_info *, unsigned int); -void rio_fill_host_slot(int, int, unsigned int, struct Host *); - -/* riocmd.c */ -int RIOFoadRta(struct Host *, struct Map *); -int RIOZombieRta(struct Host *, struct Map *); -int RIOCommandRta(struct rio_info *, unsigned long, int (*func) (struct Host *, struct Map *)); -int RIOIdentifyRta(struct rio_info *, void __user *); -int RIOKillNeighbour(struct rio_info *, void __user *); -int RIOSuspendBootRta(struct Host *, int, int); -int RIOFoadWakeup(struct rio_info *); -struct CmdBlk *RIOGetCmdBlk(void); -void RIOFreeCmdBlk(struct CmdBlk *); -int RIOQueueCmdBlk(struct Host *, unsigned int, struct CmdBlk *); -void RIOPollHostCommands(struct rio_info *, struct Host *); -int RIOWFlushMark(unsigned long, struct CmdBlk *); -int RIORFlushEnable(unsigned long, struct CmdBlk *); -int RIOUnUse(unsigned long, struct CmdBlk *); - -/* rioctrl.c */ -int riocontrol(struct rio_info *, dev_t, int, unsigned long, int); - -int RIOPreemptiveCmd(struct rio_info *, struct Port *, unsigned char); - -/* rioinit.c */ -void rioinit(struct rio_info *, struct RioHostInfo *); -void RIOInitHosts(struct rio_info *, struct RioHostInfo *); -void RIOISAinit(struct rio_info *, int); -int RIODoAT(struct rio_info *, int, int); -caddr_t RIOCheckForATCard(int); -int RIOAssignAT(struct rio_info *, int, void __iomem *, int); -int RIOBoardTest(unsigned long, void __iomem *, unsigned char, int); -void RIOAllocDataStructs(struct rio_info *); -void RIOSetupDataStructs(struct rio_info *); -int RIODefaultName(struct rio_info *, struct Host *, unsigned int); -struct rioVersion *RIOVersid(void); -void RIOHostReset(unsigned int, struct DpRam __iomem *, unsigned int); - -/* riointr.c */ -void RIOTxEnable(char *); -void RIOServiceHost(struct rio_info *, struct Host *); -int riotproc(struct rio_info *, struct ttystatics *, int, int); - -/* rioparam.c */ -int RIOParam(struct Port *, int, int, int); -int RIODelay(struct Port *PortP, int); -int RIODelay_ni(struct Port *PortP, int); -void ms_timeout(struct Port *); -int can_add_transmit(struct PKT __iomem **, struct Port *); -void add_transmit(struct Port *); -void put_free_end(struct Host *, struct PKT __iomem *); -int can_remove_receive(struct PKT __iomem **, struct Port *); -void remove_receive(struct Port *); - -/* rioroute.c */ -int RIORouteRup(struct rio_info *, unsigned int, struct Host *, struct PKT __iomem *); -void RIOFixPhbs(struct rio_info *, struct Host *, unsigned int); -unsigned int GetUnitType(unsigned int); -int RIOSetChange(struct rio_info *); -int RIOFindFreeID(struct rio_info *, struct Host *, unsigned int *, unsigned int *); - - -/* riotty.c */ - -int riotopen(struct tty_struct *tty, struct file *filp); -int riotclose(void *ptr); -int riotioctl(struct rio_info *, struct tty_struct *, int, caddr_t); -void ttyseth(struct Port *, struct ttystatics *, struct old_sgttyb *sg); - -/* riotable.c */ -int RIONewTable(struct rio_info *); -int RIOApel(struct rio_info *); -int RIODeleteRta(struct rio_info *, struct Map *); -int RIOAssignRta(struct rio_info *, struct Map *); -int RIOReMapPorts(struct rio_info *, struct Host *, struct Map *); -int RIOChangeName(struct rio_info *, struct Map *); - -#if 0 -/* riodrvr.c */ -struct rio_info *rio_install(struct RioHostInfo *); -int rio_uninstall(struct rio_info *); -int rio_open(struct rio_info *, int, struct file *); -int rio_close(struct rio_info *, struct file *); -int rio_read(struct rio_info *, struct file *, char *, int); -int rio_write(struct rio_info *, struct file *f, char *, int); -int rio_ioctl(struct rio_info *, struct file *, int, char *); -int rio_select(struct rio_info *, struct file *f, int, struct sel *); -int rio_intr(char *); -int rio_isr_thread(char *); -struct rio_info *rio_info_store(int cmd, struct rio_info *p); -#endif - -extern void rio_copy_to_card(void *from, void __iomem *to, int len); -extern int rio_minor(struct tty_struct *tty); -extern int rio_ismodem(struct tty_struct *tty); - -extern void rio_start_card_running(struct Host *HostP); - -#endif /* __func_h_def */ diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h deleted file mode 100644 index 78f2454..0000000 --- a/drivers/char/rio/host.h +++ /dev/null @@ -1,123 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : host.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:10 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)host.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_host_h__ -#define __rio_host_h__ - -/* -** the host structure - one per host card in the system. -*/ - -#define MAX_EXTRA_UNITS 64 - -/* -** Host data structure. This is used for the software equiv. of -** the host. -*/ -struct Host { - struct pci_dev *pdev; - unsigned char Type; /* RIO_EISA, RIO_MCA, ... */ - unsigned char Ivec; /* POLLED or ivec number */ - unsigned char Mode; /* Control stuff */ - unsigned char Slot; /* Slot */ - void __iomem *Caddr; /* KV address of DPRAM */ - struct DpRam __iomem *CardP; /* KV address of DPRAM, with overlay */ - unsigned long PaddrP; /* Phys. address of DPRAM */ - char Name[MAX_NAME_LEN]; /* The name of the host */ - unsigned int UniqueNum; /* host unique number */ - spinlock_t HostLock; /* Lock structure for MPX */ - unsigned int WorkToBeDone; /* set to true each interrupt */ - unsigned int InIntr; /* Being serviced? */ - unsigned int IntSrvDone; /* host's interrupt has been serviced */ - void (*Copy) (void *, void __iomem *, int); /* copy func */ - struct timer_list timer; - /* - ** I M P O R T A N T ! - ** - ** The rest of this data structure is cleared to zero after - ** a RIO_HOST_FOAD command. - */ - - unsigned long Flags; /* Whats going down */ -#define RC_WAITING 0 -#define RC_STARTUP 1 -#define RC_RUNNING 2 -#define RC_STUFFED 3 -#define RC_READY 7 -#define RUN_STATE 7 -/* -** Boot mode applies to the way in which hosts in this system will -** boot RTAs -*/ -#define RC_BOOT_ALL 0x8 /* Boot all RTAs attached */ -#define RC_BOOT_OWN 0x10 /* Only boot RTAs bound to this system */ -#define RC_BOOT_NONE 0x20 /* Don't boot any RTAs (slave mode) */ - - struct Top Topology[LINKS_PER_UNIT]; /* one per link */ - struct Map Mapping[MAX_RUP]; /* Mappings for host */ - struct PHB __iomem *PhbP; /* Pointer to the PHB array */ - unsigned short __iomem *PhbNumP; /* Ptr to Number of PHB's */ - struct LPB __iomem *LinkStrP; /* Link Structure Array */ - struct RUP __iomem *RupP; /* Sixteen real rups here */ - struct PARM_MAP __iomem *ParmMapP; /* points to the parmmap */ - unsigned int ExtraUnits[MAX_EXTRA_UNITS]; /* unknown things */ - unsigned int NumExtraBooted; /* how many of the above */ - /* - ** Twenty logical rups. - ** The first sixteen are the real Rup entries (above), the last four - ** are the link RUPs. - */ - struct UnixRup UnixRups[MAX_RUP + LINKS_PER_UNIT]; - int timeout_id; /* For calling 100 ms delays */ - int timeout_sem; /* For calling 100 ms delays */ - unsigned long locks; /* long req'd for set_bit --RR */ - char ____end_marker____; -}; -#define Control CardP->DpControl -#define SetInt CardP->DpSetInt -#define ResetTpu CardP->DpResetTpu -#define ResetInt CardP->DpResetInt -#define Signature CardP->DpSignature -#define Sram1 CardP->DpSram1 -#define Sram2 CardP->DpSram2 -#define Sram3 CardP->DpSram3 -#define Scratch CardP->DpScratch -#define __ParmMapR CardP->DpParmMapR -#define SLX CardP->DpSlx -#define Revision CardP->DpRevision -#define Unique CardP->DpUnique -#define Year CardP->DpYear -#define Week CardP->DpWeek - -#define RIO_DUMBPARM 0x0860 /* what not to expect */ - -#endif diff --git a/drivers/char/rio/link.h b/drivers/char/rio/link.h deleted file mode 100644 index f3bf11a0..0000000 --- a/drivers/char/rio/link.h +++ /dev/null @@ -1,96 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* L I N K - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _link_h -#define _link_h 1 - -/************************************************* - * Define the Link Status stuff - ************************************************/ -/* Boot request stuff */ -#define BOOT_REQUEST ((ushort) 0) /* Request for a boot */ -#define BOOT_ABORT ((ushort) 1) /* Abort a boot */ -#define BOOT_SEQUENCE ((ushort) 2) /* Packet with the number of packets - and load address */ -#define BOOT_COMPLETED ((ushort) 3) /* Boot completed */ - - -struct LPB { - u16 link_number; /* Link Number */ - u16 in_ch; /* Link In Channel */ - u16 out_ch; /* Link Out Channel */ - u8 attached_serial[4]; /* Attached serial number */ - u8 attached_host_serial[4]; - /* Serial number of Host who - booted the other end */ - u16 descheduled; /* Currently Descheduled */ - u16 state; /* Current state */ - u16 send_poll; /* Send a Poll Packet */ - u16 ltt_p; /* Process Descriptor */ - u16 lrt_p; /* Process Descriptor */ - u16 lrt_status; /* Current lrt status */ - u16 ltt_status; /* Current ltt status */ - u16 timeout; /* Timeout value */ - u16 topology; /* Topology bits */ - u16 mon_ltt; - u16 mon_lrt; - u16 WaitNoBoot; /* Secs to hold off booting */ - u16 add_packet_list; /* Add packets to here */ - u16 remove_packet_list; /* Send packets from here */ - - u16 lrt_fail_chan; /* Lrt's failure channel */ - u16 ltt_fail_chan; /* Ltt's failure channel */ - - /* RUP structure for HOST to driver communications */ - struct RUP rup; - struct RUP link_rup; /* RUP for the link (POLL, - topology etc.) */ - u16 attached_link; /* Number of attached link */ - u16 csum_errors; /* csum errors */ - u16 num_disconnects; /* number of disconnects */ - u16 num_sync_rcvd; /* # sync's received */ - u16 num_sync_rqst; /* # sync requests */ - u16 num_tx; /* Num pkts sent */ - u16 num_rx; /* Num pkts received */ - u16 module_attached; /* Module tpyes of attached */ - u16 led_timeout; /* LED timeout */ - u16 first_port; /* First port to service */ - u16 last_port; /* Last port to service */ -}; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/linux_compat.h b/drivers/char/rio/linux_compat.h deleted file mode 100644 index 34c0d28..0000000 --- a/drivers/char/rio/linux_compat.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) 2000 R.E.Wolff@BitWizard.nl - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/interrupt.h> - - -#define DEBUG_ALL - -struct ttystatics { - struct termios tm; -}; - -extern int rio_debug; - -#define RIO_DEBUG_INIT 0x000001 -#define RIO_DEBUG_BOOT 0x000002 -#define RIO_DEBUG_CMD 0x000004 -#define RIO_DEBUG_CTRL 0x000008 -#define RIO_DEBUG_INTR 0x000010 -#define RIO_DEBUG_PARAM 0x000020 -#define RIO_DEBUG_ROUTE 0x000040 -#define RIO_DEBUG_TABLE 0x000080 -#define RIO_DEBUG_TTY 0x000100 -#define RIO_DEBUG_FLOW 0x000200 -#define RIO_DEBUG_MODEMSIGNALS 0x000400 -#define RIO_DEBUG_PROBE 0x000800 -#define RIO_DEBUG_CLEANUP 0x001000 -#define RIO_DEBUG_IFLOW 0x002000 -#define RIO_DEBUG_PFE 0x004000 -#define RIO_DEBUG_REC 0x008000 -#define RIO_DEBUG_SPINLOCK 0x010000 -#define RIO_DEBUG_DELAY 0x020000 -#define RIO_DEBUG_MOD_COUNT 0x040000 - - -/* Copied over from riowinif.h . This is ugly. The winif file declares -also much other stuff which is incompatible with the headers from -the older driver. The older driver includes "brates.h" which shadows -the definitions from Linux, and is incompatible... */ - -/* RxBaud and TxBaud definitions... */ -#define RIO_B0 0x00 /* RTS / DTR signals dropped */ -#define RIO_B50 0x01 /* 50 baud */ -#define RIO_B75 0x02 /* 75 baud */ -#define RIO_B110 0x03 /* 110 baud */ -#define RIO_B134 0x04 /* 134.5 baud */ -#define RIO_B150 0x05 /* 150 baud */ -#define RIO_B200 0x06 /* 200 baud */ -#define RIO_B300 0x07 /* 300 baud */ -#define RIO_B600 0x08 /* 600 baud */ -#define RIO_B1200 0x09 /* 1200 baud */ -#define RIO_B1800 0x0A /* 1800 baud */ -#define RIO_B2400 0x0B /* 2400 baud */ -#define RIO_B4800 0x0C /* 4800 baud */ -#define RIO_B9600 0x0D /* 9600 baud */ -#define RIO_B19200 0x0E /* 19200 baud */ -#define RIO_B38400 0x0F /* 38400 baud */ -#define RIO_B56000 0x10 /* 56000 baud */ -#define RIO_B57600 0x11 /* 57600 baud */ -#define RIO_B64000 0x12 /* 64000 baud */ -#define RIO_B115200 0x13 /* 115200 baud */ -#define RIO_B2000 0x14 /* 2000 baud */ diff --git a/drivers/char/rio/map.h b/drivers/char/rio/map.h deleted file mode 100644 index 8366978..0000000 --- a/drivers/char/rio/map.h +++ /dev/null @@ -1,98 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : map.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:11 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)map.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_map_h__ -#define __rio_map_h__ - -/* -** mapping structure passed to and from the config.rio program to -** determine the current topology of the world -*/ - -#define MAX_MAP_ENTRY 17 -#define TOTAL_MAP_ENTRIES (MAX_MAP_ENTRY*RIO_SLOTS) -#define MAX_NAME_LEN 32 - -struct Map { - unsigned int HostUniqueNum; /* Supporting hosts unique number */ - unsigned int RtaUniqueNum; /* Unique number */ - /* - ** The next two IDs must be swapped on big-endian architectures - ** when using a v2.04 /etc/rio/config with a v3.00 driver (when - ** upgrading for example). - */ - unsigned short ID; /* ID used in the subnet */ - unsigned short ID2; /* ID of 2nd block of 8 for 16 port */ - unsigned long Flags; /* Booted, ID Given, Disconnected */ - unsigned long SysPort; /* First tty mapped to this port */ - struct Top Topology[LINKS_PER_UNIT]; /* ID connected to each link */ - char Name[MAX_NAME_LEN]; /* Cute name by which RTA is known */ -}; - -/* -** Flag values: -*/ -#define RTA_BOOTED 0x00000001 -#define RTA_NEWBOOT 0x00000010 -#define MSG_DONE 0x00000020 -#define RTA_INTERCONNECT 0x00000040 -#define RTA16_SECOND_SLOT 0x00000080 -#define BEEN_HERE 0x00000100 -#define SLOT_TENTATIVE 0x40000000 -#define SLOT_IN_USE 0x80000000 - -/* -** HostUniqueNum is the unique number from the host card that this RTA -** is to be connected to. -** RtaUniqueNum is the unique number of the RTA concerned. It will be ZERO -** if the slot in the table is unused. If it is the same as the HostUniqueNum -** then this slot represents a host card. -** Flags contains current boot/route state info -** SysPort is a value in the range 0-504, being the number of the first tty -** on this RTA. Each RTA supports 8 ports. The SysPort value must be modulo 8. -** SysPort 0-127 correspond to /dev/ttyr001 to /dev/ttyr128, with minor -** numbers 0-127. SysPort 128-255 correspond to /dev/ttyr129 to /dev/ttyr256, -** again with minor numbers 0-127, and so on for SysPorts 256-383 and 384-511 -** ID will be in the range 0-16 for a `known' RTA. ID will be 0xFFFF for an -** unused slot/unknown ID etc. -** The Topology array contains the ID of the unit connected to each of the -** four links on this unit. The entry will be 0xFFFF if NOTHING is connected -** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link. -** The Name field is a null-terminated string, upto 31 characters, containing -** the 'cute' name that the sysadmin/users know the RTA by. It is permissible -** for this string to contain any character in the range \040 to \176 inclusive. -** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The -** special character '%' IS allowable, and needs no special action. -** -*/ - -#endif diff --git a/drivers/char/rio/param.h b/drivers/char/rio/param.h deleted file mode 100644 index 7e9b628..0000000 --- a/drivers/char/rio/param.h +++ /dev/null @@ -1,55 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : param.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:12 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)param.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_param_h__ -#define __rio_param_h__ - -/* -** the param command block, as used in OPEN and PARAM calls. -*/ - -struct phb_param { - u8 Cmd; /* It is very important that these line up */ - u8 Cor1; /* with what is expected at the other end. */ - u8 Cor2; /* to confirm that you've got it right, */ - u8 Cor4; /* check with cirrus/cirrus.h */ - u8 Cor5; - u8 TxXon; /* Transmit X-On character */ - u8 TxXoff; /* Transmit X-Off character */ - u8 RxXon; /* Receive X-On character */ - u8 RxXoff; /* Receive X-Off character */ - u8 LNext; /* Literal-next character */ - u8 TxBaud; /* Transmit baudrate */ - u8 RxBaud; /* Receive baudrate */ -}; - -#endif diff --git a/drivers/char/rio/parmmap.h b/drivers/char/rio/parmmap.h deleted file mode 100644 index acc8fa43..0000000 --- a/drivers/char/rio/parmmap.h +++ /dev/null @@ -1,81 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* H O S T M E M O R Y M A P - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- -6/4/1991 jonb Made changes to accommodate Mips R3230 bus - ***************************************************************************/ - -#ifndef _parmap_h -#define _parmap_h - -typedef struct PARM_MAP PARM_MAP; - -struct PARM_MAP { - u16 phb_ptr; /* Pointer to the PHB array */ - u16 phb_num_ptr; /* Ptr to Number of PHB's */ - u16 free_list; /* Free List pointer */ - u16 free_list_end; /* Free List End pointer */ - u16 q_free_list_ptr; /* Ptr to Q_BUF variable */ - u16 unit_id_ptr; /* Unit Id */ - u16 link_str_ptr; /* Link Structure Array */ - u16 bootloader_1; /* 1st Stage Boot Loader */ - u16 bootloader_2; /* 2nd Stage Boot Loader */ - u16 port_route_map_ptr; /* Port Route Map */ - u16 route_ptr; /* Unit Route Map */ - u16 map_present; /* Route Map present */ - s16 pkt_num; /* Total number of packets */ - s16 q_num; /* Total number of Q packets */ - u16 buffers_per_port; /* Number of buffers per port */ - u16 heap_size; /* Initial size of heap */ - u16 heap_left; /* Current Heap left */ - u16 error; /* Error code */ - u16 tx_max; /* Max number of tx pkts per phb */ - u16 rx_max; /* Max number of rx pkts per phb */ - u16 rx_limit; /* For high / low watermarks */ - s16 links; /* Links to use */ - s16 timer; /* Interrupts per second */ - u16 rups; /* Pointer to the RUPs */ - u16 max_phb; /* Mostly for debugging */ - u16 living; /* Just increments!! */ - u16 init_done; /* Initialisation over */ - u16 booting_link; - u16 idle_count; /* Idle time counter */ - u16 busy_count; /* Busy counter */ - u16 idle_control; /* Control Idle Process */ - u16 tx_intr; /* TX interrupt pending */ - u16 rx_intr; /* RX interrupt pending */ - u16 rup_intr; /* RUP interrupt pending */ -}; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/pci.h b/drivers/char/rio/pci.h deleted file mode 100644 index 6032f91..0000000 --- a/drivers/char/rio/pci.h +++ /dev/null @@ -1,72 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : pci.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:12 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)pci.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_pci_h__ -#define __rio_pci_h__ - -/* -** PCI stuff -*/ - -#define PCITpFastClock 0x80 -#define PCITpSlowClock 0x00 -#define PCITpFastLinks 0x40 -#define PCITpSlowLinks 0x00 -#define PCITpIntEnable 0x04 -#define PCITpIntDisable 0x00 -#define PCITpBusEnable 0x02 -#define PCITpBusDisable 0x00 -#define PCITpBootFromRam 0x01 -#define PCITpBootFromLink 0x00 - -#define RIO_PCI_VENDOR 0x11CB -#define RIO_PCI_DEVICE 0x8000 -#define RIO_PCI_BASE_CLASS 0x02 -#define RIO_PCI_SUB_CLASS 0x80 -#define RIO_PCI_PROG_IFACE 0x00 - -#define RIO_PCI_RID 0x0008 -#define RIO_PCI_BADR0 0x0010 -#define RIO_PCI_INTLN 0x003C -#define RIO_PCI_INTPIN 0x003D - -#define RIO_PCI_MEM_SIZE 65536 - -#define RIO_PCI_TURBO_TP 0x80 -#define RIO_PCI_FAST_LINKS 0x40 -#define RIO_PCI_INT_ENABLE 0x04 -#define RIO_PCI_TP_BUS_ENABLE 0x02 -#define RIO_PCI_BOOT_FROM_RAM 0x01 - -#define RIO_PCI_DEFAULT_MODE 0x05 - -#endif /* __rio_pci_h__ */ diff --git a/drivers/char/rio/phb.h b/drivers/char/rio/phb.h deleted file mode 100644 index a4c48ae..0000000 --- a/drivers/char/rio/phb.h +++ /dev/null @@ -1,142 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* P H B H E A D E R ******* - ******* ******* - **************************************************************************** - - Author : Ian Nandhra, Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _phb_h -#define _phb_h 1 - -/************************************************* - * Handshake asserted. Deasserted by the LTT(s) - ************************************************/ -#define PHB_HANDSHAKE_SET ((ushort) 0x001) /* Set by LRT */ - -#define PHB_HANDSHAKE_RESET ((ushort) 0x002) /* Set by ISR / driver */ - -#define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET | PHB_HANDSHAKE_SET) - /* Reset by ltt */ - - -/************************************************* - * Maximum number of PHB's - ************************************************/ -#define MAX_PHB ((ushort) 128) /* range 0-127 */ - -/************************************************* - * Defines for the mode fields - ************************************************/ -#define TXPKT_INCOMPLETE 0x0001 /* Previous tx packet not completed */ -#define TXINTR_ENABLED 0x0002 /* Tx interrupt is enabled */ -#define TX_TAB3 0x0004 /* TAB3 mode */ -#define TX_OCRNL 0x0008 /* OCRNL mode */ -#define TX_ONLCR 0x0010 /* ONLCR mode */ -#define TX_SENDSPACES 0x0020 /* Send n spaces command needs - completing */ -#define TX_SENDNULL 0x0040 /* Escaping NULL needs completing */ -#define TX_SENDLF 0x0080 /* LF -> CR LF needs completing */ -#define TX_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel - port */ -#define TX_HANGOVER (TX_SENDSPACES | TX_SENDLF | TX_SENDNULL) -#define TX_DTRFLOW 0x0200 /* DTR tx flow control */ -#define TX_DTRFLOWED 0x0400 /* DTR is low - don't allow more data - into the FIFO */ -#define TX_DATAINFIFO 0x0800 /* There is data in the FIFO */ -#define TX_BUSY 0x1000 /* Data in FIFO, shift or holding regs */ - -#define RX_SPARE 0x0001 /* SPARE */ -#define RXINTR_ENABLED 0x0002 /* Rx interrupt enabled */ -#define RX_ICRNL 0x0008 /* ICRNL mode */ -#define RX_INLCR 0x0010 /* INLCR mode */ -#define RX_IGNCR 0x0020 /* IGNCR mode */ -#define RX_CTSFLOW 0x0040 /* CTSFLOW enabled */ -#define RX_IXOFF 0x0080 /* IXOFF enabled */ -#define RX_CTSFLOWED 0x0100 /* CTSFLOW and CTS dropped */ -#define RX_IXOFFED 0x0200 /* IXOFF and xoff sent */ -#define RX_BUFFERED 0x0400 /* Try and pass on complete packets */ - -#define PORT_ISOPEN 0x0001 /* Port open? */ -#define PORT_HUPCL 0x0002 /* Hangup on close? */ -#define PORT_MOPENPEND 0x0004 /* Modem open pending */ -#define PORT_ISPARALLEL 0x0008 /* Parallel port */ -#define PORT_BREAK 0x0010 /* Port on break */ -#define PORT_STATUSPEND 0x0020 /* Status packet pending */ -#define PORT_BREAKPEND 0x0040 /* Break packet pending */ -#define PORT_MODEMPEND 0x0080 /* Modem status packet pending */ -#define PORT_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel - port */ -#define PORT_FULLMODEM 0x0200 /* Full modem signals */ -#define PORT_RJ45 0x0400 /* RJ45 connector - no RI signal */ -#define PORT_RESTRICTED 0x0600 /* Restricted connector - no RI / DTR */ - -#define PORT_MODEMBITS 0x0600 /* Mask for modem fields */ - -#define PORT_WCLOSE 0x0800 /* Waiting for close */ -#define PORT_HANDSHAKEFIX 0x1000 /* Port has H/W flow control fix */ -#define PORT_WASPCLOSED 0x2000 /* Port closed with PCLOSE */ -#define DUMPMODE 0x4000 /* Dump RTA mem */ -#define READ_REG 0x8000 /* Read CD1400 register */ - - - -/************************************************************************** - * PHB Structure - * A few words. - * - * Normally Packets are added to the end of the list and removed from - * the start. The pointer tx_add points to a SPACE to put a Packet. - * The pointer tx_remove points to the next Packet to remove - *************************************************************************/ - -struct PHB { - u8 source; - u8 handshake; - u8 status; - u16 timeout; /* Maximum of 1.9 seconds */ - u8 link; /* Send down this link */ - u8 destination; - u16 tx_start; - u16 tx_end; - u16 tx_add; - u16 tx_remove; - - u16 rx_start; - u16 rx_end; - u16 rx_add; - u16 rx_remove; - -}; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/pkt.h b/drivers/char/rio/pkt.h deleted file mode 100644 index a945816..0000000 --- a/drivers/char/rio/pkt.h +++ /dev/null @@ -1,77 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* P A C K E T H E A D E R F I L E - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _pkt_h -#define _pkt_h 1 - -#define PKT_CMD_BIT ((ushort) 0x080) -#define PKT_CMD_DATA ((ushort) 0x080) - -#define PKT_ACK ((ushort) 0x040) - -#define PKT_TGL ((ushort) 0x020) - -#define PKT_LEN_MASK ((ushort) 0x07f) - -#define DATA_WNDW ((ushort) 0x10) -#define PKT_TTL_MASK ((ushort) 0x0f) - -#define PKT_MAX_DATA_LEN 72 - -#define PKT_LENGTH sizeof(struct PKT) -#define SYNC_PKT_LENGTH (PKT_LENGTH + 4) - -#define CONTROL_PKT_LEN_MASK PKT_LEN_MASK -#define CONTROL_PKT_CMD_BIT PKT_CMD_BIT -#define CONTROL_PKT_ACK (PKT_ACK << 8) -#define CONTROL_PKT_TGL (PKT_TGL << 8) -#define CONTROL_PKT_TTL_MASK (PKT_TTL_MASK << 8) -#define CONTROL_DATA_WNDW (DATA_WNDW << 8) - -struct PKT { - u8 dest_unit; /* Destination Unit Id */ - u8 dest_port; /* Destination POrt */ - u8 src_unit; /* Source Unit Id */ - u8 src_port; /* Source POrt */ - u8 len; - u8 control; - u8 data[PKT_MAX_DATA_LEN]; - /* Actual data :-) */ - u16 csum; /* C-SUM */ -}; -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/port.h b/drivers/char/rio/port.h deleted file mode 100644 index 49cf6d1..0000000 --- a/drivers/char/rio/port.h +++ /dev/null @@ -1,179 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : port.h -** SID : 1.3 -** Last Modified : 11/6/98 11:34:12 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)port.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_port_h__ -#define __rio_port_h__ - -/* -** Port data structure -*/ -struct Port { - struct gs_port gs; - int PortNum; /* RIO port no., 0-511 */ - struct Host *HostP; - void __iomem *Caddr; - unsigned short HostPort; /* Port number on host card */ - unsigned char RupNum; /* Number of RUP for port */ - unsigned char ID2; /* Second ID of RTA for port */ - unsigned long State; /* FLAGS for open & xopen */ -#define RIO_LOPEN 0x00001 /* Local open */ -#define RIO_MOPEN 0x00002 /* Modem open */ -#define RIO_WOPEN 0x00004 /* Waiting for open */ -#define RIO_CLOSING 0x00008 /* The port is being close */ -#define RIO_XPBUSY 0x00010 /* Transparent printer busy */ -#define RIO_BREAKING 0x00020 /* Break in progress */ -#define RIO_DIRECT 0x00040 /* Doing Direct output */ -#define RIO_EXCLUSIVE 0x00080 /* Stream open for exclusive use */ -#define RIO_NDELAY 0x00100 /* Stream is open FNDELAY */ -#define RIO_CARR_ON 0x00200 /* Stream has carrier present */ -#define RIO_XPWANTR 0x00400 /* Stream wanted by Xprint */ -#define RIO_RBLK 0x00800 /* Stream is read-blocked */ -#define RIO_BUSY 0x01000 /* Stream is BUSY for write */ -#define RIO_TIMEOUT 0x02000 /* Stream timeout in progress */ -#define RIO_TXSTOP 0x04000 /* Stream output is stopped */ -#define RIO_WAITFLUSH 0x08000 /* Stream waiting for flush */ -#define RIO_DYNOROD 0x10000 /* Drain failed */ -#define RIO_DELETED 0x20000 /* RTA has been deleted */ -#define RIO_ISSCANCODE 0x40000 /* This line is in scancode mode */ -#define RIO_USING_EUC 0x100000 /* Using extended Unix chars */ -#define RIO_CAN_COOK 0x200000 /* This line can do cooking */ -#define RIO_TRIAD_MODE 0x400000 /* Enable TRIAD special ops. */ -#define RIO_TRIAD_BLOCK 0x800000 /* Next read will block */ -#define RIO_TRIAD_FUNC 0x1000000 /* Seen a function key coming in */ -#define RIO_THROTTLE_RX 0x2000000 /* RX needs to be throttled. */ - - unsigned long Config; /* FLAGS for NOREAD.... */ -#define RIO_NOREAD 0x0001 /* Are not allowed to read port */ -#define RIO_NOWRITE 0x0002 /* Are not allowed to write port */ -#define RIO_NOXPRINT 0x0004 /* Are not allowed to xprint port */ -#define RIO_NOMASK 0x0007 /* All not allowed things */ -#define RIO_IXANY 0x0008 /* Port is allowed ixany */ -#define RIO_MODEM 0x0010 /* Stream is a modem device */ -#define RIO_IXON 0x0020 /* Port is allowed ixon */ -#define RIO_WAITDRAIN 0x0040 /* Wait for port to completely drain */ -#define RIO_MAP_50_TO_50 0x0080 /* Map 50 baud to 50 baud */ -#define RIO_MAP_110_TO_110 0x0100 /* Map 110 baud to 110 baud */ - -/* -** 15.10.1998 ARG - ESIL 0761 prt fix -** As LynxOS does not appear to support Hardware Flow Control ..... -** Define our own flow control flags in 'Config'. -*/ -#define RIO_CTSFLOW 0x0200 /* RIO's own CTSFLOW flag */ -#define RIO_RTSFLOW 0x0400 /* RIO's own RTSFLOW flag */ - - - struct PHB __iomem *PhbP; /* pointer to PHB for port */ - u16 __iomem *TxAdd; /* Add packets here */ - u16 __iomem *TxStart; /* Start of add array */ - u16 __iomem *TxEnd; /* End of add array */ - u16 __iomem *RxRemove; /* Remove packets here */ - u16 __iomem *RxStart; /* Start of remove array */ - u16 __iomem *RxEnd; /* End of remove array */ - unsigned int RtaUniqueNum; /* Unique number of RTA */ - unsigned short PortState; /* status of port */ - unsigned short ModemState; /* status of modem lines */ - unsigned long ModemLines; /* Modem bits sent to RTA */ - unsigned char CookMode; /* who expands CR/LF? */ - unsigned char ParamSem; /* Prevent write during param */ - unsigned char Mapped; /* if port mapped onto host */ - unsigned char SecondBlock; /* if port belongs to 2nd block - of 16 port RTA */ - unsigned char InUse; /* how many pre-emptive cmds */ - unsigned char Lock; /* if params locked */ - unsigned char Store; /* if params stored across closes */ - unsigned char FirstOpen; /* TRUE if first time port opened */ - unsigned char FlushCmdBodge; /* if doing a (non)flush */ - unsigned char MagicFlags; /* require intr processing */ -#define MAGIC_FLUSH 0x01 /* mirror of WflushFlag */ -#define MAGIC_REBOOT 0x02 /* RTA re-booted, re-open ports */ -#define MORE_OUTPUT_EYGOR 0x04 /* riotproc failed to empty clists */ - unsigned char WflushFlag; /* 1 How many WFLUSHs active */ -/* -** Transparent print stuff -*/ - struct Xprint { -#ifndef MAX_XP_CTRL_LEN -#define MAX_XP_CTRL_LEN 16 /* ALSO IN DAEMON.H */ -#endif - unsigned int XpCps; - char XpOn[MAX_XP_CTRL_LEN]; - char XpOff[MAX_XP_CTRL_LEN]; - unsigned short XpLen; /* strlen(XpOn)+strlen(XpOff) */ - unsigned char XpActive; - unsigned char XpLastTickOk; /* TRUE if we can process */ -#define XP_OPEN 00001 -#define XP_RUNABLE 00002 - struct ttystatics *XttyP; - } Xprint; - unsigned char RxDataStart; - unsigned char Cor2Copy; /* copy of COR2 */ - char *Name; /* points to the Rta's name */ - char *TxRingBuffer; - unsigned short TxBufferIn; /* New data arrives here */ - unsigned short TxBufferOut; /* Intr removes data here */ - unsigned short OldTxBufferOut; /* Indicates if draining */ - int TimeoutId; /* Timeout ID */ - unsigned int Debug; - unsigned char WaitUntilBooted; /* True if open should block */ - unsigned int statsGather; /* True if gathering stats */ - unsigned long txchars; /* Chars transmitted */ - unsigned long rxchars; /* Chars received */ - unsigned long opens; /* port open count */ - unsigned long closes; /* port close count */ - unsigned long ioctls; /* ioctl count */ - unsigned char LastRxTgl; /* Last state of rx toggle bit */ - spinlock_t portSem; /* Lock using this sem */ - int MonitorTstate; /* Monitoring ? */ - int timeout_id; /* For calling 100 ms delays */ - int timeout_sem; /* For calling 100 ms delays */ - int firstOpen; /* First time open ? */ - char *p; /* save the global struc here .. */ -}; - -struct ModuleInfo { - char *Name; - unsigned int Flags[4]; /* one per port on a module */ -}; - -/* -** This struct is required because trying to grab an entire Port structure -** runs into problems with differing struct sizes between driver and config. -*/ -struct PortParams { - unsigned int Port; - unsigned long Config; - unsigned long State; - struct ttystatics *TtyP; -}; - -#endif diff --git a/drivers/char/rio/protsts.h b/drivers/char/rio/protsts.h deleted file mode 100644 index 8ab7940..0000000 --- a/drivers/char/rio/protsts.h +++ /dev/null @@ -1,110 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* P R O T O C O L S T A T U S S T R U C T U R E ******* - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _protsts_h -#define _protsts_h 1 - -/************************************************* - * ACK bit. Last Packet received OK. Set by - * rxpkt to indicate that the Packet has been - * received OK and that the LTT must set the ACK - * bit in the next outward bound Packet - * and re-set by LTT's after xmit. - * - * Gets shoved into rx_status - ************************************************/ -#define PHB_RX_LAST_PKT_ACKED ((ushort) 0x080) - -/******************************************************* - * The Rx TOGGLE bit. - * Stuffed into rx_status by RXPKT - ******************************************************/ -#define PHB_RX_DATA_WNDW ((ushort) 0x040) - -/******************************************************* - * The Rx TOGGLE bit. Matches the setting in PKT.H - * Stuffed into rx_status - ******************************************************/ -#define PHB_RX_TGL ((ushort) 0x2000) - - -/************************************************* - * This bit is set by the LRT to indicate that - * an ACK (packet) must be returned. - * - * Gets shoved into tx_status - ************************************************/ -#define PHB_TX_SEND_PKT_ACK ((ushort) 0x08) - -/************************************************* - * Set by LTT to indicate that an ACK is required - *************************************************/ -#define PHB_TX_ACK_RQRD ((ushort) 0x01) - - -/******************************************************* - * The Tx TOGGLE bit. - * Stuffed into tx_status by RXPKT from the PKT WndW - * field. Looked by the LTT when the NEXT Packet - * is going to be sent. - ******************************************************/ -#define PHB_TX_DATA_WNDW ((ushort) 0x04) - - -/******************************************************* - * The Tx TOGGLE bit. Matches the setting in PKT.H - * Stuffed into tx_status - ******************************************************/ -#define PHB_TX_TGL ((ushort) 0x02) - -/******************************************************* - * Request intr bit. Set when the queue has gone quiet - * and the PHB has requested an interrupt. - ******************************************************/ -#define PHB_TX_INTR ((ushort) 0x100) - -/******************************************************* - * SET if the PHB cannot send any more data down the - * Link - ******************************************************/ -#define PHB_TX_HANDSHAKE ((ushort) 0x010) - - -#define RUP_SEND_WNDW ((ushort) 0x08) ; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/rio.h b/drivers/char/rio/rio.h deleted file mode 100644 index 1bf3622..0000000 --- a/drivers/char/rio/rio.h +++ /dev/null @@ -1,208 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 1998 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rio.h -** SID : 1.3 -** Last Modified : 11/6/98 11:34:13 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)rio.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_rio_h__ -#define __rio_rio_h__ - -/* -** Maximum numbers of things -*/ -#define RIO_SLOTS 4 /* number of configuration slots */ -#define RIO_HOSTS 4 /* number of hosts that can be found */ -#define PORTS_PER_HOST 128 /* number of ports per host */ -#define LINKS_PER_UNIT 4 /* number of links from a host */ -#define RIO_PORTS (PORTS_PER_HOST * RIO_HOSTS) /* max. no. of ports */ -#define RTAS_PER_HOST (MAX_RUP) /* number of RTAs per host */ -#define PORTS_PER_RTA (PORTS_PER_HOST/RTAS_PER_HOST) /* ports on a rta */ -#define PORTS_PER_MODULE 4 /* number of ports on a plug-in module */ - /* number of modules on an RTA */ -#define MODULES_PER_RTA (PORTS_PER_RTA/PORTS_PER_MODULE) -#define MAX_PRODUCT 16 /* numbr of different product codes */ -#define MAX_MODULE_TYPES 16 /* number of different types of module */ - -#define RIO_CONTROL_DEV 128 /* minor number of host/control device */ -#define RIO_INVALID_MAJOR 0 /* test first host card's major no for validity */ - -/* -** number of RTAs that can be bound to a master -*/ -#define MAX_RTA_BINDINGS (MAX_RUP * RIO_HOSTS) - -/* -** Unit types -*/ -#define PC_RTA16 0x90000000 -#define PC_RTA8 0xe0000000 -#define TYPE_HOST 0 -#define TYPE_RTA8 1 -#define TYPE_RTA16 2 - -/* -** Flag values returned by functions -*/ - -#define RIO_FAIL -1 - -/* -** SysPort value for something that hasn't any ports -*/ -#define NO_PORT 0xFFFFFFFF - -/* -** Unit ID Of all hosts -*/ -#define HOST_ID 0 - -/* -** Break bytes into nybles -*/ -#define LONYBLE(X) ((X) & 0xF) -#define HINYBLE(X) (((X)>>4) & 0xF) - -/* -** Flag values passed into some functions -*/ -#define DONT_SLEEP 0 -#define OK_TO_SLEEP 1 - -#define DONT_PRINT 1 -#define DO_PRINT 0 - -#define PRINT_TO_LOG_CONS 0 -#define PRINT_TO_CONS 1 -#define PRINT_TO_LOG 2 - -/* -** Timeout has trouble with times of less than 3 ticks... -*/ -#define MIN_TIMEOUT 3 - -/* -** Generally useful constants -*/ - -#define HUNDRED_MS ((HZ/10)?(HZ/10):1) -#define ONE_MEG 0x100000 -#define SIXTY_FOUR_K 0x10000 - -#define RIO_AT_MEM_SIZE SIXTY_FOUR_K -#define RIO_EISA_MEM_SIZE SIXTY_FOUR_K -#define RIO_MCA_MEM_SIZE SIXTY_FOUR_K - -#define COOK_WELL 0 -#define COOK_MEDIUM 1 -#define COOK_RAW 2 - -/* -** Pointer manipulation stuff -** RIO_PTR takes hostp->Caddr and the offset into the DP RAM area -** and produces a UNIX caddr_t (pointer) to the object -** RIO_OBJ takes hostp->Caddr and a UNIX pointer to an object and -** returns the offset into the DP RAM area. -*/ -#define RIO_PTR(C,O) (((unsigned char __iomem *)(C))+(0xFFFF&(O))) -#define RIO_OFF(C,O) ((unsigned char __iomem *)(O)-(unsigned char __iomem *)(C)) - -/* -** How to convert from various different device number formats: -** DEV is a dev number, as passed to open, close etc - NOT a minor -** number! -**/ - -#define RIO_MODEM_MASK 0x1FF -#define RIO_MODEM_BIT 0x200 -#define RIO_UNMODEM(DEV) (MINOR(DEV) & RIO_MODEM_MASK) -#define RIO_ISMODEM(DEV) (MINOR(DEV) & RIO_MODEM_BIT) -#define RIO_PORT(DEV,FIRST_MAJ) ( (MAJOR(DEV) - FIRST_MAJ) * PORTS_PER_HOST) \ - + MINOR(DEV) -#define CSUM(pkt_ptr) (((u16 *)(pkt_ptr))[0] + ((u16 *)(pkt_ptr))[1] + \ - ((u16 *)(pkt_ptr))[2] + ((u16 *)(pkt_ptr))[3] + \ - ((u16 *)(pkt_ptr))[4] + ((u16 *)(pkt_ptr))[5] + \ - ((u16 *)(pkt_ptr))[6] + ((u16 *)(pkt_ptr))[7] + \ - ((u16 *)(pkt_ptr))[8] + ((u16 *)(pkt_ptr))[9] ) - -#define RIO_LINK_ENABLE 0x80FF /* FF is a hack, mainly for Mips, to */ - /* prevent a really stupid race condition. */ - -#define NOT_INITIALISED 0 -#define INITIALISED 1 - -#define NOT_POLLING 0 -#define POLLING 1 - -#define NOT_CHANGED 0 -#define CHANGED 1 - -#define NOT_INUSE 0 - -#define DISCONNECT 0 -#define CONNECT 1 - -/* ------ Control Codes ------ */ - -#define CONTROL '^' -#define IFOAD ( CONTROL + 1 ) -#define IDENTIFY ( CONTROL + 2 ) -#define ZOMBIE ( CONTROL + 3 ) -#define UFOAD ( CONTROL + 4 ) -#define IWAIT ( CONTROL + 5 ) - -#define IFOAD_MAGIC 0xF0AD /* of course */ -#define ZOMBIE_MAGIC (~0xDEAD) /* not dead -> zombie */ -#define UFOAD_MAGIC 0xD1E /* kill-your-neighbour */ -#define IWAIT_MAGIC 0xB1DE /* Bide your time */ - -/* ------ Error Codes ------ */ - -#define E_NO_ERROR ((ushort) 0) - -/* ------ Free Lists ------ */ - -struct rio_free_list { - u16 next; - u16 prev; -}; - -/* NULL for card side linked lists */ -#define TPNULL ((ushort)(0x8000)) -/* We can add another packet to a transmit queue if the packet pointer pointed - * to by the TxAdd pointer has PKT_IN_USE clear in its address. */ -#define PKT_IN_USE 0x1 - -/* ------ Topology ------ */ - -struct Top { - u8 Unit; - u8 Link; -}; - -#endif /* __rio_h__ */ diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c deleted file mode 100644 index 5e33293..0000000 --- a/drivers/char/rio/rio_linux.c +++ /dev/null @@ -1,1204 +0,0 @@ - -/* rio_linux.c -- Linux driver for the Specialix RIO series cards. - * - * - * (C) 1999 R.E.Wolff@BitWizard.nl - * - * Specialix pays for the development and support of this driver. - * Please DO contact support@specialix.co.uk if you require - * support. But please read the documentation (rio.txt) first. - * - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - * */ - -#include <linux/module.h> -#include <linux/kdev_t.h> -#include <asm/io.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/mm.h> -#include <linux/serial.h> -#include <linux/fcntl.h> -#include <linux/major.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/miscdevice.h> -#include <linux/init.h> - -#include <linux/generic_serial.h> -#include <asm/uaccess.h> - -#include "linux_compat.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" -#include "protsts.h" -#include "rioboard.h" - - -#include "rio_linux.h" - -/* I don't think that this driver can handle more than 512 ports on -one machine. Specialix specifies max 4 boards in one machine. I don't -know why. If you want to try anyway you'll have to increase the number -of boards in rio.h. You'll have to allocate more majors if you need -more than 512 ports.... */ - -#ifndef RIO_NORMAL_MAJOR0 -/* This allows overriding on the compiler commandline, or in a "major.h" - include or something like that */ -#define RIO_NORMAL_MAJOR0 154 -#define RIO_NORMAL_MAJOR1 156 -#endif - -#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 -#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000 -#endif - -#ifndef RIO_WINDOW_LEN -#define RIO_WINDOW_LEN 0x10000 -#endif - - -/* Configurable options: - (Don't be too sure that it'll work if you toggle them) */ - -/* Am I paranoid or not ? ;-) */ -#undef RIO_PARANOIA_CHECK - - -/* 20 -> 2000 per second. The card should rate-limit interrupts at 1000 - Hz, but it is user configurable. I don't recommend going above 1000 - Hz. The interrupt ratelimit might trigger if the interrupt is - shared with a very active other device. - undef this if you want to disable the check.... -*/ -#define IRQ_RATE_LIMIT 200 - - -/* These constants are derived from SCO Source */ -static DEFINE_MUTEX(rio_fw_mutex); -static struct Conf - RIOConf = { - /* locator */ "RIO Config here", - /* startuptime */ HZ * 2, - /* how long to wait for card to run */ - /* slowcook */ 0, - /* TRUE -> always use line disc. */ - /* intrpolltime */ 1, - /* The frequency of OUR polls */ - /* breakinterval */ 25, - /* x10 mS XXX: units seem to be 1ms not 10! -- REW */ - /* timer */ 10, - /* mS */ - /* RtaLoadBase */ 0x7000, - /* HostLoadBase */ 0x7C00, - /* XpHz */ 5, - /* number of Xprint hits per second */ - /* XpCps */ 120, - /* Xprint characters per second */ - /* XpOn */ "\033d#", - /* start Xprint for a wyse 60 */ - /* XpOff */ "\024", - /* end Xprint for a wyse 60 */ - /* MaxXpCps */ 2000, - /* highest Xprint speed */ - /* MinXpCps */ 10, - /* slowest Xprint speed */ - /* SpinCmds */ 1, - /* non-zero for mega fast boots */ - /* First Addr */ 0x0A0000, - /* First address to look at */ - /* Last Addr */ 0xFF0000, - /* Last address looked at */ - /* BufferSize */ 1024, - /* Bytes per port of buffering */ - /* LowWater */ 256, - /* how much data left before wakeup */ - /* LineLength */ 80, - /* how wide is the console? */ - /* CmdTimeout */ HZ, - /* how long a close command may take */ -}; - - - - -/* Function prototypes */ - -static void rio_disable_tx_interrupts(void *ptr); -static void rio_enable_tx_interrupts(void *ptr); -static void rio_disable_rx_interrupts(void *ptr); -static void rio_enable_rx_interrupts(void *ptr); -static int rio_carrier_raised(struct tty_port *port); -static void rio_shutdown_port(void *ptr); -static int rio_set_real_termios(void *ptr); -static void rio_hungup(void *ptr); -static void rio_close(void *ptr); -static int rio_chars_in_buffer(void *ptr); -static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); -static int rio_init_drivers(void); - -static void my_hd(void *addr, int len); - -static struct tty_driver *rio_driver, *rio_driver2; - -/* The name "p" is a bit non-descript. But that's what the rio-lynxos -sources use all over the place. */ -struct rio_info *p; - -int rio_debug; - - -/* You can have the driver poll your card. - - Set rio_poll to 1 to poll every timer tick (10ms on Intel). - This is used when the card cannot use an interrupt for some reason. -*/ -static int rio_poll = 1; - - -/* These are the only open spaces in my computer. Yours may have more - or less.... */ -static int rio_probe_addrs[] = { 0xc0000, 0xd0000, 0xe0000 }; - -#define NR_RIO_ADDRS ARRAY_SIZE(rio_probe_addrs) - - -/* Set the mask to all-ones. This alas, only supports 32 interrupts. - Some architectures may need more. -- Changed to LONG to - support up to 64 bits on 64bit architectures. -- REW 20/06/99 */ -static long rio_irqmask = -1; - -MODULE_AUTHOR("Rogier Wolff <R.E.Wolff@bitwizard.nl>, Patrick van de Lageweg <patrick@bitwizard.nl>"); -MODULE_DESCRIPTION("RIO driver"); -MODULE_LICENSE("GPL"); -module_param(rio_poll, int, 0); -module_param(rio_debug, int, 0644); -module_param(rio_irqmask, long, 0); - -static struct real_driver rio_real_driver = { - rio_disable_tx_interrupts, - rio_enable_tx_interrupts, - rio_disable_rx_interrupts, - rio_enable_rx_interrupts, - rio_shutdown_port, - rio_set_real_termios, - rio_chars_in_buffer, - rio_close, - rio_hungup, - NULL -}; - -/* - * Firmware loader driver specific routines - * - */ - -static const struct file_operations rio_fw_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = rio_fw_ioctl, - .llseek = noop_llseek, -}; - -static struct miscdevice rio_fw_device = { - RIOCTL_MISC_MINOR, "rioctl", &rio_fw_fops -}; - - - - - -#ifdef RIO_PARANOIA_CHECK - -/* This doesn't work. Who's paranoid around here? Not me! */ - -static inline int rio_paranoia_check(struct rio_port const *port, char *name, const char *routine) -{ - - static const char *badmagic = KERN_ERR "rio: Warning: bad rio port magic number for device %s in %s\n"; - static const char *badinfo = KERN_ERR "rio: Warning: null rio port for device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != RIO_MAGIC) { - printk(badmagic, name, routine); - return 1; - } - - return 0; -} -#else -#define rio_paranoia_check(a,b,c) 0 -#endif - - -#ifdef DEBUG -static void my_hd(void *ad, int len) -{ - int i, j, ch; - unsigned char *addr = ad; - - for (i = 0; i < len; i += 16) { - rio_dprintk(RIO_DEBUG_PARAM, "%08lx ", (unsigned long) addr + i); - for (j = 0; j < 16; j++) { - rio_dprintk(RIO_DEBUG_PARAM, "%02x %s", addr[j + i], (j == 7) ? " " : ""); - } - for (j = 0; j < 16; j++) { - ch = addr[j + i]; - rio_dprintk(RIO_DEBUG_PARAM, "%c", (ch < 0x20) ? '.' : ((ch > 0x7f) ? '.' : ch)); - } - rio_dprintk(RIO_DEBUG_PARAM, "\n"); - } -} -#else -#define my_hd(ad,len) do{/* nothing*/ } while (0) -#endif - - -/* Delay a number of jiffies, allowing a signal to interrupt */ -int RIODelay(struct Port *PortP, int njiffies) -{ - func_enter(); - - rio_dprintk(RIO_DEBUG_DELAY, "delaying %d jiffies\n", njiffies); - msleep_interruptible(jiffies_to_msecs(njiffies)); - func_exit(); - - if (signal_pending(current)) - return RIO_FAIL; - else - return !RIO_FAIL; -} - - -/* Delay a number of jiffies, disallowing a signal to interrupt */ -int RIODelay_ni(struct Port *PortP, int njiffies) -{ - func_enter(); - - rio_dprintk(RIO_DEBUG_DELAY, "delaying %d jiffies (ni)\n", njiffies); - msleep(jiffies_to_msecs(njiffies)); - func_exit(); - return !RIO_FAIL; -} - -void rio_copy_to_card(void *from, void __iomem *to, int len) -{ - rio_copy_toio(to, from, len); -} - -int rio_minor(struct tty_struct *tty) -{ - return tty->index + ((tty->driver == rio_driver) ? 0 : 256); -} - -static int rio_set_real_termios(void *ptr) -{ - return RIOParam((struct Port *) ptr, RIOC_CONFIG, 1, 1); -} - - -static void rio_reset_interrupt(struct Host *HostP) -{ - func_enter(); - - switch (HostP->Type) { - case RIO_AT: - case RIO_MCA: - case RIO_PCI: - writeb(0xFF, &HostP->ResetInt); - } - - func_exit(); -} - - -static irqreturn_t rio_interrupt(int irq, void *ptr) -{ - struct Host *HostP; - func_enter(); - - HostP = ptr; /* &p->RIOHosts[(long)ptr]; */ - rio_dprintk(RIO_DEBUG_IFLOW, "rio: enter rio_interrupt (%d/%d)\n", irq, HostP->Ivec); - - /* AAargh! The order in which to do these things is essential and - not trivial. - - - hardware twiddling goes before "recursive". Otherwise when we - poll the card, and a recursive interrupt happens, we won't - ack the card, so it might keep on interrupting us. (especially - level sensitive interrupt systems like PCI). - - - Rate limit goes before hardware twiddling. Otherwise we won't - catch a card that has gone bonkers. - - - The "initialized" test goes after the hardware twiddling. Otherwise - the card will stick us in the interrupt routine again. - - - The initialized test goes before recursive. - */ - - rio_dprintk(RIO_DEBUG_IFLOW, "rio: We've have noticed the interrupt\n"); - if (HostP->Ivec == irq) { - /* Tell the card we've noticed the interrupt. */ - rio_reset_interrupt(HostP); - } - - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) - return IRQ_HANDLED; - - if (test_and_set_bit(RIO_BOARD_INTR_LOCK, &HostP->locks)) { - printk(KERN_ERR "Recursive interrupt! (host %p/irq%d)\n", ptr, HostP->Ivec); - return IRQ_HANDLED; - } - - RIOServiceHost(p, HostP); - - rio_dprintk(RIO_DEBUG_IFLOW, "riointr() doing host %p type %d\n", ptr, HostP->Type); - - clear_bit(RIO_BOARD_INTR_LOCK, &HostP->locks); - rio_dprintk(RIO_DEBUG_IFLOW, "rio: exit rio_interrupt (%d/%d)\n", irq, HostP->Ivec); - func_exit(); - return IRQ_HANDLED; -} - - -static void rio_pollfunc(unsigned long data) -{ - func_enter(); - - rio_interrupt(0, &p->RIOHosts[data]); - mod_timer(&p->RIOHosts[data].timer, jiffies + rio_poll); - - func_exit(); -} - - -/* ********************************************************************** * - * Here are the routines that actually * - * interface with the generic_serial driver * - * ********************************************************************** */ - -/* Ehhm. I don't know how to fiddle with interrupts on the Specialix - cards. .... Hmm. Ok I figured it out. You don't. -- REW */ - -static void rio_disable_tx_interrupts(void *ptr) -{ - func_enter(); - - /* port->gs.port.flags &= ~GS_TX_INTEN; */ - - func_exit(); -} - - -static void rio_enable_tx_interrupts(void *ptr) -{ - struct Port *PortP = ptr; - /* int hn; */ - - func_enter(); - - /* hn = PortP->HostP - p->RIOHosts; - - rio_dprintk (RIO_DEBUG_TTY, "Pushing host %d\n", hn); - rio_interrupt (-1,(void *) hn, NULL); */ - - RIOTxEnable((char *) PortP); - - /* - * In general we cannot count on "tx empty" interrupts, although - * the interrupt routine seems to be able to tell the difference. - */ - PortP->gs.port.flags &= ~GS_TX_INTEN; - - func_exit(); -} - - -static void rio_disable_rx_interrupts(void *ptr) -{ - func_enter(); - func_exit(); -} - -static void rio_enable_rx_interrupts(void *ptr) -{ - /* struct rio_port *port = ptr; */ - func_enter(); - func_exit(); -} - - -/* Jeez. Isn't this simple? */ -static int rio_carrier_raised(struct tty_port *port) -{ - struct Port *PortP = container_of(port, struct Port, gs.port); - int rv; - - func_enter(); - rv = (PortP->ModemState & RIOC_MSVR1_CD) != 0; - - rio_dprintk(RIO_DEBUG_INIT, "Getting CD status: %d\n", rv); - - func_exit(); - return rv; -} - - -/* Jeez. Isn't this simple? Actually, we can sync with the actual port - by just pushing stuff into the queue going to the port... */ -static int rio_chars_in_buffer(void *ptr) -{ - func_enter(); - - func_exit(); - return 0; -} - - -/* Nothing special here... */ -static void rio_shutdown_port(void *ptr) -{ - struct Port *PortP; - - func_enter(); - - PortP = (struct Port *) ptr; - PortP->gs.port.tty = NULL; - func_exit(); -} - - -/* I haven't the foggiest why the decrement use count has to happen - here. The whole linux serial drivers stuff needs to be redesigned. - My guess is that this is a hack to minimize the impact of a bug - elsewhere. Thinking about it some more. (try it sometime) Try - running minicom on a serial port that is driven by a modularized - driver. Have the modem hangup. Then remove the driver module. Then - exit minicom. I expect an "oops". -- REW */ -static void rio_hungup(void *ptr) -{ - struct Port *PortP; - - func_enter(); - - PortP = (struct Port *) ptr; - PortP->gs.port.tty = NULL; - - func_exit(); -} - - -/* The standard serial_close would become shorter if you'd wrap it like - this. - rs_close (...){save_flags;cli;real_close();dec_use_count;restore_flags;} - */ -static void rio_close(void *ptr) -{ - struct Port *PortP; - - func_enter(); - - PortP = (struct Port *) ptr; - - riotclose(ptr); - - if (PortP->gs.port.count) { - printk(KERN_ERR "WARNING port count:%d\n", PortP->gs.port.count); - PortP->gs.port.count = 0; - } - - PortP->gs.port.tty = NULL; - func_exit(); -} - - - -static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - int rc = 0; - func_enter(); - - /* The "dev" argument isn't used. */ - mutex_lock(&rio_fw_mutex); - rc = riocontrol(p, 0, cmd, arg, capable(CAP_SYS_ADMIN)); - mutex_unlock(&rio_fw_mutex); - - func_exit(); - return rc; -} - -extern int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg); - -static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int rc; - struct Port *PortP; - int ival; - - func_enter(); - - PortP = (struct Port *) tty->driver_data; - - rc = 0; - switch (cmd) { - case TIOCSSOFTCAR: - if ((rc = get_user(ival, (unsigned __user *) argp)) == 0) { - tty->termios->c_cflag = (tty->termios->c_cflag & ~CLOCAL) | (ival ? CLOCAL : 0); - } - break; - case TIOCGSERIAL: - rc = -EFAULT; - if (access_ok(VERIFY_WRITE, argp, sizeof(struct serial_struct))) - rc = gs_getserial(&PortP->gs, argp); - break; - case TCSBRK: - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n"); - rc = -EIO; - } else { - if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2, 250) == - RIO_FAIL) { - rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n"); - rc = -EIO; - } - } - break; - case TCSBRKP: - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n"); - rc = -EIO; - } else { - int l; - l = arg ? arg * 100 : 250; - if (l > 255) - l = 255; - if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2, - arg ? arg * 100 : 250) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n"); - rc = -EIO; - } - } - break; - case TIOCSSERIAL: - rc = -EFAULT; - if (access_ok(VERIFY_READ, argp, sizeof(struct serial_struct))) - rc = gs_setserial(&PortP->gs, argp); - break; - default: - rc = -ENOIOCTLCMD; - break; - } - func_exit(); - return rc; -} - - -/* The throttle/unthrottle scheme for the Specialix card is different - * from other drivers and deserves some explanation. - * The Specialix hardware takes care of XON/XOFF - * and CTS/RTS flow control itself. This means that all we have to - * do when signalled by the upper tty layer to throttle/unthrottle is - * to make a note of it here. When we come to read characters from the - * rx buffers on the card (rio_receive_chars()) we look to see if the - * upper layer can accept more (as noted here in rio_rx_throt[]). - * If it can't we simply don't remove chars from the cards buffer. - * When the tty layer can accept chars, we again note that here and when - * rio_receive_chars() is called it will remove them from the cards buffer. - * The card will notice that a ports buffer has drained below some low - * water mark and will unflow control the line itself, using whatever - * flow control scheme is in use for that port. -- Simon Allen - */ - -static void rio_throttle(struct tty_struct *tty) -{ - struct Port *port = (struct Port *) tty->driver_data; - - func_enter(); - /* If the port is using any type of input flow - * control then throttle the port. - */ - - if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) { - port->State |= RIO_THROTTLE_RX; - } - - func_exit(); -} - - -static void rio_unthrottle(struct tty_struct *tty) -{ - struct Port *port = (struct Port *) tty->driver_data; - - func_enter(); - /* Always unthrottle even if flow control is not enabled on - * this port in case we disabled flow control while the port - * was throttled - */ - - port->State &= ~RIO_THROTTLE_RX; - - func_exit(); - return; -} - - - - - -/* ********************************************************************** * - * Here are the initialization routines. * - * ********************************************************************** */ - - -static struct vpd_prom *get_VPD_PROM(struct Host *hp) -{ - static struct vpd_prom vpdp; - char *p; - int i; - - func_enter(); - rio_dprintk(RIO_DEBUG_PROBE, "Going to verify vpd prom at %p.\n", hp->Caddr + RIO_VPD_ROM); - - p = (char *) &vpdp; - for (i = 0; i < sizeof(struct vpd_prom); i++) - *p++ = readb(hp->Caddr + RIO_VPD_ROM + i * 2); - /* read_rio_byte (hp, RIO_VPD_ROM + i*2); */ - - /* Terminate the identifier string. - *** requires one extra byte in struct vpd_prom *** */ - *p++ = 0; - - if (rio_debug & RIO_DEBUG_PROBE) - my_hd((char *) &vpdp, 0x20); - - func_exit(); - - return &vpdp; -} - -static const struct tty_operations rio_ops = { - .open = riotopen, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = rio_ioctl, - .throttle = rio_throttle, - .unthrottle = rio_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, -}; - -static int rio_init_drivers(void) -{ - int error = -ENOMEM; - - rio_driver = alloc_tty_driver(256); - if (!rio_driver) - goto out; - rio_driver2 = alloc_tty_driver(256); - if (!rio_driver2) - goto out1; - - func_enter(); - - rio_driver->owner = THIS_MODULE; - rio_driver->driver_name = "specialix_rio"; - rio_driver->name = "ttySR"; - rio_driver->major = RIO_NORMAL_MAJOR0; - rio_driver->type = TTY_DRIVER_TYPE_SERIAL; - rio_driver->subtype = SERIAL_TYPE_NORMAL; - rio_driver->init_termios = tty_std_termios; - rio_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - rio_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(rio_driver, &rio_ops); - - rio_driver2->owner = THIS_MODULE; - rio_driver2->driver_name = "specialix_rio"; - rio_driver2->name = "ttySR"; - rio_driver2->major = RIO_NORMAL_MAJOR1; - rio_driver2->type = TTY_DRIVER_TYPE_SERIAL; - rio_driver2->subtype = SERIAL_TYPE_NORMAL; - rio_driver2->init_termios = tty_std_termios; - rio_driver2->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - rio_driver2->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(rio_driver2, &rio_ops); - - rio_dprintk(RIO_DEBUG_INIT, "set_termios = %p\n", gs_set_termios); - - if ((error = tty_register_driver(rio_driver))) - goto out2; - if ((error = tty_register_driver(rio_driver2))) - goto out3; - func_exit(); - return 0; - out3: - tty_unregister_driver(rio_driver); - out2: - put_tty_driver(rio_driver2); - out1: - put_tty_driver(rio_driver); - out: - printk(KERN_ERR "rio: Couldn't register a rio driver, error = %d\n", error); - return 1; -} - -static const struct tty_port_operations rio_port_ops = { - .carrier_raised = rio_carrier_raised, -}; - -static int rio_init_datastructures(void) -{ - int i; - struct Port *port; - func_enter(); - - /* Many drivers statically allocate the maximum number of ports - There is no reason not to allocate them dynamically. Is there? -- REW */ - /* However, the RIO driver allows users to configure their first - RTA as the ports numbered 504-511. We therefore need to allocate - the whole range. :-( -- REW */ - -#define RI_SZ sizeof(struct rio_info) -#define HOST_SZ sizeof(struct Host) -#define PORT_SZ sizeof(struct Port *) -#define TMIO_SZ sizeof(struct termios *) - rio_dprintk(RIO_DEBUG_INIT, "getting : %Zd %Zd %Zd %Zd %Zd bytes\n", RI_SZ, RIO_HOSTS * HOST_SZ, RIO_PORTS * PORT_SZ, RIO_PORTS * TMIO_SZ, RIO_PORTS * TMIO_SZ); - - if (!(p = kzalloc(RI_SZ, GFP_KERNEL))) - goto free0; - if (!(p->RIOHosts = kzalloc(RIO_HOSTS * HOST_SZ, GFP_KERNEL))) - goto free1; - if (!(p->RIOPortp = kzalloc(RIO_PORTS * PORT_SZ, GFP_KERNEL))) - goto free2; - p->RIOConf = RIOConf; - rio_dprintk(RIO_DEBUG_INIT, "Got : %p %p %p\n", p, p->RIOHosts, p->RIOPortp); - -#if 1 - for (i = 0; i < RIO_PORTS; i++) { - port = p->RIOPortp[i] = kzalloc(sizeof(struct Port), GFP_KERNEL); - if (!port) { - goto free6; - } - rio_dprintk(RIO_DEBUG_INIT, "initing port %d (%d)\n", i, port->Mapped); - tty_port_init(&port->gs.port); - port->gs.port.ops = &rio_port_ops; - port->PortNum = i; - port->gs.magic = RIO_MAGIC; - port->gs.close_delay = HZ / 2; - port->gs.closing_wait = 30 * HZ; - port->gs.rd = &rio_real_driver; - spin_lock_init(&port->portSem); - } -#else - /* We could postpone initializing them to when they are configured. */ -#endif - - - - if (rio_debug & RIO_DEBUG_INIT) { - my_hd(&rio_real_driver, sizeof(rio_real_driver)); - } - - - func_exit(); - return 0; - - free6:for (i--; i >= 0; i--) - kfree(p->RIOPortp[i]); -/*free5: - free4: - free3:*/ kfree(p->RIOPortp); - free2:kfree(p->RIOHosts); - free1: - rio_dprintk(RIO_DEBUG_INIT, "Not enough memory! %p %p %p\n", p, p->RIOHosts, p->RIOPortp); - kfree(p); - free0: - return -ENOMEM; -} - -static void __exit rio_release_drivers(void) -{ - func_enter(); - tty_unregister_driver(rio_driver2); - tty_unregister_driver(rio_driver); - put_tty_driver(rio_driver2); - put_tty_driver(rio_driver); - func_exit(); -} - - -#ifdef CONFIG_PCI - /* This was written for SX, but applies to RIO too... - (including bugs....) - - There is another bit besides Bit 17. Turning that bit off - (on boards shipped with the fix in the eeprom) results in a - hang on the next access to the card. - */ - - /******************************************************** - * Setting bit 17 in the CNTRL register of the PLX 9050 * - * chip forces a retry on writes while a read is pending.* - * This is to prevent the card locking up on Intel Xeon * - * multiprocessor systems with the NX chipset. -- NV * - ********************************************************/ - -/* Newer cards are produced with this bit set from the configuration - EEprom. As the bit is read/write for the CPU, we can fix it here, - if we detect that it isn't set correctly. -- REW */ - -static void fix_rio_pci(struct pci_dev *pdev) -{ - unsigned long hwbase; - unsigned char __iomem *rebase; - unsigned int t; - -#define CNTRL_REG_OFFSET 0x50 -#define CNTRL_REG_GOODVALUE 0x18260000 - - hwbase = pci_resource_start(pdev, 0); - rebase = ioremap(hwbase, 0x80); - t = readl(rebase + CNTRL_REG_OFFSET); - if (t != CNTRL_REG_GOODVALUE) { - printk(KERN_DEBUG "rio: performing cntrl reg fix: %08x -> %08x\n", t, CNTRL_REG_GOODVALUE); - writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET); - } - iounmap(rebase); -} -#endif - - -static int __init rio_init(void) -{ - int found = 0; - int i; - struct Host *hp; - int retval; - struct vpd_prom *vpdp; - int okboard; - -#ifdef CONFIG_PCI - struct pci_dev *pdev = NULL; - unsigned short tshort; -#endif - - func_enter(); - rio_dprintk(RIO_DEBUG_INIT, "Initing rio module... (rio_debug=%d)\n", rio_debug); - - if (abs((long) (&rio_debug) - rio_debug) < 0x10000) { - printk(KERN_WARNING "rio: rio_debug is an address, instead of a value. " "Assuming -1. Was %x/%p.\n", rio_debug, &rio_debug); - rio_debug = -1; - } - - if (misc_register(&rio_fw_device) < 0) { - printk(KERN_ERR "RIO: Unable to register firmware loader driver.\n"); - return -EIO; - } - - retval = rio_init_datastructures(); - if (retval < 0) { - misc_deregister(&rio_fw_device); - return retval; - } -#ifdef CONFIG_PCI - /* First look for the JET devices: */ - while ((pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, pdev))) { - u32 tint; - - if (pci_enable_device(pdev)) - continue; - - /* Specialix has a whole bunch of cards with - 0x2000 as the device ID. They say its because - the standard requires it. Stupid standard. */ - /* It seems that reading a word doesn't work reliably on 2.0. - Also, reading a non-aligned dword doesn't work. So we read the - whole dword at 0x2c and extract the word at 0x2e (SUBSYSTEM_ID) - ourselves */ - pci_read_config_dword(pdev, 0x2c, &tint); - tshort = (tint >> 16) & 0xffff; - rio_dprintk(RIO_DEBUG_PROBE, "Got a specialix card: %x.\n", tint); - if (tshort != 0x0100) { - rio_dprintk(RIO_DEBUG_PROBE, "But it's not a RIO card (%d)...\n", tshort); - continue; - } - rio_dprintk(RIO_DEBUG_PROBE, "cp1\n"); - - hp = &p->RIOHosts[p->RIONumHosts]; - hp->PaddrP = pci_resource_start(pdev, 2); - hp->Ivec = pdev->irq; - if (((1 << hp->Ivec) & rio_irqmask) == 0) - hp->Ivec = 0; - hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); - hp->CardP = (struct DpRam __iomem *) hp->Caddr; - hp->Type = RIO_PCI; - hp->Copy = rio_copy_to_card; - hp->Mode = RIO_PCI_BOOT_FROM_RAM; - spin_lock_init(&hp->HostLock); - rio_reset_interrupt(hp); - rio_start_card_running(hp); - - rio_dprintk(RIO_DEBUG_PROBE, "Going to test it (%p/%p).\n", (void *) p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr); - if (RIOBoardTest(p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr, RIO_PCI, 0) == 0) { - rio_dprintk(RIO_DEBUG_INIT, "Done RIOBoardTest\n"); - writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); - p->RIOHosts[p->RIONumHosts].UniqueNum = - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0]) & 0xFF) << 0) | - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24); - rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); - - fix_rio_pci(pdev); - - p->RIOHosts[p->RIONumHosts].pdev = pdev; - pci_dev_get(pdev); - - p->RIOLastPCISearch = 0; - p->RIONumHosts++; - found++; - } else { - iounmap(p->RIOHosts[p->RIONumHosts].Caddr); - p->RIOHosts[p->RIONumHosts].Caddr = NULL; - } - } - - /* Then look for the older PCI card.... : */ - - /* These older PCI cards have problems (only byte-mode access is - supported), which makes them a bit awkward to support. - They also have problems sharing interrupts. Be careful. - (The driver now refuses to share interrupts for these - cards. This should be sufficient). - */ - - /* Then look for the older RIO/PCI devices: */ - while ((pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_RIO, pdev))) { - if (pci_enable_device(pdev)) - continue; - -#ifdef CONFIG_RIO_OLDPCI - hp = &p->RIOHosts[p->RIONumHosts]; - hp->PaddrP = pci_resource_start(pdev, 0); - hp->Ivec = pdev->irq; - if (((1 << hp->Ivec) & rio_irqmask) == 0) - hp->Ivec = 0; - hp->Ivec |= 0x8000; /* Mark as non-sharable */ - hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); - hp->CardP = (struct DpRam __iomem *) hp->Caddr; - hp->Type = RIO_PCI; - hp->Copy = rio_copy_to_card; - hp->Mode = RIO_PCI_BOOT_FROM_RAM; - spin_lock_init(&hp->HostLock); - - rio_dprintk(RIO_DEBUG_PROBE, "Ivec: %x\n", hp->Ivec); - rio_dprintk(RIO_DEBUG_PROBE, "Mode: %x\n", hp->Mode); - - rio_reset_interrupt(hp); - rio_start_card_running(hp); - rio_dprintk(RIO_DEBUG_PROBE, "Going to test it (%p/%p).\n", (void *) p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr); - if (RIOBoardTest(p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr, RIO_PCI, 0) == 0) { - writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); - p->RIOHosts[p->RIONumHosts].UniqueNum = - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0]) & 0xFF) << 0) | - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24); - rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); - - p->RIOHosts[p->RIONumHosts].pdev = pdev; - pci_dev_get(pdev); - - p->RIOLastPCISearch = 0; - p->RIONumHosts++; - found++; - } else { - iounmap(p->RIOHosts[p->RIONumHosts].Caddr); - p->RIOHosts[p->RIONumHosts].Caddr = NULL; - } -#else - printk(KERN_ERR "Found an older RIO PCI card, but the driver is not " "compiled to support it.\n"); -#endif - } -#endif /* PCI */ - - /* Now probe for ISA cards... */ - for (i = 0; i < NR_RIO_ADDRS; i++) { - hp = &p->RIOHosts[p->RIONumHosts]; - hp->PaddrP = rio_probe_addrs[i]; - /* There was something about the IRQs of these cards. 'Forget what.--REW */ - hp->Ivec = 0; - hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN); - hp->CardP = (struct DpRam __iomem *) hp->Caddr; - hp->Type = RIO_AT; - hp->Copy = rio_copy_to_card; /* AT card PCI???? - PVDL - * -- YES! this is now a normal copy. Only the - * old PCI card uses the special PCI copy. - * Moreover, the ISA card will work with the - * special PCI copy anyway. -- REW */ - hp->Mode = 0; - spin_lock_init(&hp->HostLock); - - vpdp = get_VPD_PROM(hp); - rio_dprintk(RIO_DEBUG_PROBE, "Got VPD ROM\n"); - okboard = 0; - if ((strncmp(vpdp->identifier, RIO_ISA_IDENT, 16) == 0) || (strncmp(vpdp->identifier, RIO_ISA2_IDENT, 16) == 0) || (strncmp(vpdp->identifier, RIO_ISA3_IDENT, 16) == 0)) { - /* Board is present... */ - if (RIOBoardTest(hp->PaddrP, hp->Caddr, RIO_AT, 0) == 0) { - /* ... and feeling fine!!!! */ - rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); - if (RIOAssignAT(p, hp->PaddrP, hp->Caddr, 0)) { - rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, host%d uniqid = %x.\n", p->RIONumHosts, p->RIOHosts[p->RIONumHosts - 1].UniqueNum); - okboard++; - found++; - } - } - - if (!okboard) { - iounmap(hp->Caddr); - hp->Caddr = NULL; - } - } - } - - - for (i = 0; i < p->RIONumHosts; i++) { - hp = &p->RIOHosts[i]; - if (hp->Ivec) { - int mode = IRQF_SHARED; - if (hp->Ivec & 0x8000) { - mode = 0; - hp->Ivec &= 0x7fff; - } - rio_dprintk(RIO_DEBUG_INIT, "Requesting interrupt hp: %p rio_interrupt: %d Mode: %x\n", hp, hp->Ivec, hp->Mode); - retval = request_irq(hp->Ivec, rio_interrupt, mode, "rio", hp); - rio_dprintk(RIO_DEBUG_INIT, "Return value from request_irq: %d\n", retval); - if (retval) { - printk(KERN_ERR "rio: Cannot allocate irq %d.\n", hp->Ivec); - hp->Ivec = 0; - } - rio_dprintk(RIO_DEBUG_INIT, "Got irq %d.\n", hp->Ivec); - if (hp->Ivec != 0) { - rio_dprintk(RIO_DEBUG_INIT, "Enabling interrupts on rio card.\n"); - hp->Mode |= RIO_PCI_INT_ENABLE; - } else - hp->Mode &= ~RIO_PCI_INT_ENABLE; - rio_dprintk(RIO_DEBUG_INIT, "New Mode: %x\n", hp->Mode); - rio_start_card_running(hp); - } - /* Init the timer "always" to make sure that it can safely be - deleted when we unload... */ - - setup_timer(&hp->timer, rio_pollfunc, i); - if (!hp->Ivec) { - rio_dprintk(RIO_DEBUG_INIT, "Starting polling at %dj intervals.\n", rio_poll); - mod_timer(&hp->timer, jiffies + rio_poll); - } - } - - if (found) { - rio_dprintk(RIO_DEBUG_INIT, "rio: total of %d boards detected.\n", found); - rio_init_drivers(); - } else { - /* deregister the misc device we created earlier */ - misc_deregister(&rio_fw_device); - } - - func_exit(); - return found ? 0 : -EIO; -} - - -static void __exit rio_exit(void) -{ - int i; - struct Host *hp; - - func_enter(); - - for (i = 0, hp = p->RIOHosts; i < p->RIONumHosts; i++, hp++) { - RIOHostReset(hp->Type, hp->CardP, hp->Slot); - if (hp->Ivec) { - free_irq(hp->Ivec, hp); - rio_dprintk(RIO_DEBUG_INIT, "freed irq %d.\n", hp->Ivec); - } - /* It is safe/allowed to del_timer a non-active timer */ - del_timer_sync(&hp->timer); - if (hp->Caddr) - iounmap(hp->Caddr); - if (hp->Type == RIO_PCI) - pci_dev_put(hp->pdev); - } - - if (misc_deregister(&rio_fw_device) < 0) { - printk(KERN_INFO "rio: couldn't deregister control-device\n"); - } - - - rio_dprintk(RIO_DEBUG_CLEANUP, "Cleaning up drivers\n"); - - rio_release_drivers(); - - /* Release dynamically allocated memory */ - kfree(p->RIOPortp); - kfree(p->RIOHosts); - kfree(p); - - func_exit(); -} - -module_init(rio_init); -module_exit(rio_exit); diff --git a/drivers/char/rio/rio_linux.h b/drivers/char/rio/rio_linux.h deleted file mode 100644 index 7f26cd7..0000000 --- a/drivers/char/rio/rio_linux.h +++ /dev/null @@ -1,197 +0,0 @@ - -/* - * rio_linux.h - * - * Copyright (C) 1998,1999,2000 R.E.Wolff@BitWizard.nl - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * RIO serial driver. - * - * Version 1.0 -- July, 1999. - * - */ - -#define RIO_NBOARDS 4 -#define RIO_PORTSPERBOARD 128 -#define RIO_NPORTS (RIO_NBOARDS * RIO_PORTSPERBOARD) - -#define MODEM_SUPPORT - -#ifdef __KERNEL__ - -#define RIO_MAGIC 0x12345678 - - -struct vpd_prom { - unsigned short id; - char hwrev; - char hwass; - int uniqid; - char myear; - char mweek; - char hw_feature[5]; - char oem_id; - char identifier[16]; -}; - - -#define RIO_DEBUG_ALL 0xffffffff - -#define O_OTHER(tty) \ - ((O_OLCUC(tty)) ||\ - (O_ONLCR(tty)) ||\ - (O_OCRNL(tty)) ||\ - (O_ONOCR(tty)) ||\ - (O_ONLRET(tty)) ||\ - (O_OFILL(tty)) ||\ - (O_OFDEL(tty)) ||\ - (O_NLDLY(tty)) ||\ - (O_CRDLY(tty)) ||\ - (O_TABDLY(tty)) ||\ - (O_BSDLY(tty)) ||\ - (O_VTDLY(tty)) ||\ - (O_FFDLY(tty))) - -/* Same for input. */ -#define I_OTHER(tty) \ - ((I_INLCR(tty)) ||\ - (I_IGNCR(tty)) ||\ - (I_ICRNL(tty)) ||\ - (I_IUCLC(tty)) ||\ - (L_ISIG(tty))) - - -#endif /* __KERNEL__ */ - - -#define RIO_BOARD_INTR_LOCK 1 - - -#ifndef RIOCTL_MISC_MINOR -/* Allow others to gather this into "major.h" or something like that */ -#define RIOCTL_MISC_MINOR 169 -#endif - - -/* Allow us to debug "in the field" without requiring clients to - recompile.... */ -#if 1 -#define rio_spin_lock_irqsave(sem, flags) do { \ - rio_dprintk (RIO_DEBUG_SPINLOCK, "spinlockirqsave: %p %s:%d\n", \ - sem, __FILE__, __LINE__);\ - spin_lock_irqsave(sem, flags);\ - } while (0) - -#define rio_spin_unlock_irqrestore(sem, flags) do { \ - rio_dprintk (RIO_DEBUG_SPINLOCK, "spinunlockirqrestore: %p %s:%d\n",\ - sem, __FILE__, __LINE__);\ - spin_unlock_irqrestore(sem, flags);\ - } while (0) - -#define rio_spin_lock(sem) do { \ - rio_dprintk (RIO_DEBUG_SPINLOCK, "spinlock: %p %s:%d\n",\ - sem, __FILE__, __LINE__);\ - spin_lock(sem);\ - } while (0) - -#define rio_spin_unlock(sem) do { \ - rio_dprintk (RIO_DEBUG_SPINLOCK, "spinunlock: %p %s:%d\n",\ - sem, __FILE__, __LINE__);\ - spin_unlock(sem);\ - } while (0) -#else -#define rio_spin_lock_irqsave(sem, flags) \ - spin_lock_irqsave(sem, flags) - -#define rio_spin_unlock_irqrestore(sem, flags) \ - spin_unlock_irqrestore(sem, flags) - -#define rio_spin_lock(sem) \ - spin_lock(sem) - -#define rio_spin_unlock(sem) \ - spin_unlock(sem) - -#endif - - - -#ifdef CONFIG_RIO_OLDPCI -static inline void __iomem *rio_memcpy_toio(void __iomem *dummy, void __iomem *dest, void *source, int n) -{ - char __iomem *dst = dest; - char *src = source; - - while (n--) { - writeb(*src++, dst++); - (void) readb(dummy); - } - - return dest; -} - -static inline void __iomem *rio_copy_toio(void __iomem *dest, void *source, int n) -{ - char __iomem *dst = dest; - char *src = source; - - while (n--) - writeb(*src++, dst++); - - return dest; -} - - -static inline void *rio_memcpy_fromio(void *dest, void __iomem *source, int n) -{ - char *dst = dest; - char __iomem *src = source; - - while (n--) - *dst++ = readb(src++); - - return dest; -} - -#else -#define rio_memcpy_toio(dummy,dest,source,n) memcpy_toio(dest, source, n) -#define rio_copy_toio memcpy_toio -#define rio_memcpy_fromio memcpy_fromio -#endif - -#define DEBUG 1 - - -/* - This driver can spew a whole lot of debugging output at you. If you - need maximum performance, you should disable the DEBUG define. To - aid in debugging in the field, I'm leaving the compile-time debug - features enabled, and disable them "runtime". That allows me to - instruct people with problems to enable debugging without requiring - them to recompile... -*/ - -#ifdef DEBUG -#define rio_dprintk(f, str...) do { if (rio_debug & f) printk (str);} while (0) -#define func_enter() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s\n", __func__) -#define func_exit() rio_dprintk (RIO_DEBUG_FLOW, "rio: exit %s\n", __func__) -#define func_enter2() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s (port %d)\n",__func__, port->line) -#else -#define rio_dprintk(f, str...) /* nothing */ -#define func_enter() -#define func_exit() -#define func_enter2() -#endif diff --git a/drivers/char/rio/rioboard.h b/drivers/char/rio/rioboard.h deleted file mode 100644 index 2522300..0000000 --- a/drivers/char/rio/rioboard.h +++ /dev/null @@ -1,275 +0,0 @@ -/************************************************************************/ -/* */ -/* Title : RIO Host Card Hardware Definitions */ -/* */ -/* Author : N.P.Vassallo */ -/* */ -/* Creation : 26th April 1999 */ -/* */ -/* Version : 1.0.0 */ -/* */ -/* Copyright : (c) Specialix International Ltd. 1999 * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * */ -/* Description : Prototypes, structures and definitions */ -/* describing the RIO board hardware */ -/* */ -/************************************************************************/ - -#ifndef _rioboard_h /* If RIOBOARD.H not already defined */ -#define _rioboard_h 1 - -/***************************************************************************** -*********************** *********************** -*********************** Hardware Control Registers *********************** -*********************** *********************** -*****************************************************************************/ - -/* Hardware Registers... */ - -#define RIO_REG_BASE 0x7C00 /* Base of control registers */ - -#define RIO_CONFIG RIO_REG_BASE + 0x0000 /* WRITE: Configuration Register */ -#define RIO_INTSET RIO_REG_BASE + 0x0080 /* WRITE: Interrupt Set */ -#define RIO_RESET RIO_REG_BASE + 0x0100 /* WRITE: Host Reset */ -#define RIO_INTRESET RIO_REG_BASE + 0x0180 /* WRITE: Interrupt Reset */ - -#define RIO_VPD_ROM RIO_REG_BASE + 0x0000 /* READ: Vital Product Data ROM */ -#define RIO_INTSTAT RIO_REG_BASE + 0x0080 /* READ: Interrupt Status (Jet boards only) */ -#define RIO_RESETSTAT RIO_REG_BASE + 0x0100 /* READ: Reset Status (Jet boards only) */ - -/* RIO_VPD_ROM definitions... */ -#define VPD_SLX_ID1 0x00 /* READ: Specialix Identifier #1 */ -#define VPD_SLX_ID2 0x01 /* READ: Specialix Identifier #2 */ -#define VPD_HW_REV 0x02 /* READ: Hardware Revision */ -#define VPD_HW_ASSEM 0x03 /* READ: Hardware Assembly Level */ -#define VPD_UNIQUEID4 0x04 /* READ: Unique Identifier #4 */ -#define VPD_UNIQUEID3 0x05 /* READ: Unique Identifier #3 */ -#define VPD_UNIQUEID2 0x06 /* READ: Unique Identifier #2 */ -#define VPD_UNIQUEID1 0x07 /* READ: Unique Identifier #1 */ -#define VPD_MANU_YEAR 0x08 /* READ: Year Of Manufacture (0 = 1970) */ -#define VPD_MANU_WEEK 0x09 /* READ: Week Of Manufacture (0 = week 1 Jan) */ -#define VPD_HWFEATURE1 0x0A /* READ: Hardware Feature Byte 1 */ -#define VPD_HWFEATURE2 0x0B /* READ: Hardware Feature Byte 2 */ -#define VPD_HWFEATURE3 0x0C /* READ: Hardware Feature Byte 3 */ -#define VPD_HWFEATURE4 0x0D /* READ: Hardware Feature Byte 4 */ -#define VPD_HWFEATURE5 0x0E /* READ: Hardware Feature Byte 5 */ -#define VPD_OEMID 0x0F /* READ: OEM Identifier */ -#define VPD_IDENT 0x10 /* READ: Identifier string (16 bytes) */ -#define VPD_IDENT_LEN 0x10 - -/* VPD ROM Definitions... */ -#define SLX_ID1 0x4D -#define SLX_ID2 0x98 - -#define PRODUCT_ID(a) ((a>>4)&0xF) /* Use to obtain Product ID from VPD_UNIQUEID1 */ - -#define ID_SX_ISA 0x2 -#define ID_RIO_EISA 0x3 -#define ID_SX_PCI 0x5 -#define ID_SX_EISA 0x7 -#define ID_RIO_RTA16 0x9 -#define ID_RIO_ISA 0xA -#define ID_RIO_MCA 0xB -#define ID_RIO_SBUS 0xC -#define ID_RIO_PCI 0xD -#define ID_RIO_RTA8 0xE - -/* Transputer bootstrap definitions... */ - -#define BOOTLOADADDR (0x8000 - 6) -#define BOOTINDICATE (0x8000 - 2) - -/* Firmware load position... */ - -#define FIRMWARELOADADDR 0x7C00 /* Firmware is loaded _before_ this address */ - -/***************************************************************************** -***************************** ***************************** -***************************** RIO (Rev1) ISA ***************************** -***************************** ***************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_ISA_IDENT "JBJGPGGHINSMJPJR" - -#define RIO_ISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_ISA_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_ISA_CFG_IRQMASK 0x30 /* Interrupt mask */ -#define RIO_ISA_CFG_IRQ12 0x10 /* Interrupt Level 12 */ -#define RIO_ISA_CFG_IRQ11 0x20 /* Interrupt Level 11 */ -#define RIO_ISA_CFG_IRQ9 0x30 /* Interrupt Level 9 */ -#define RIO_ISA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ -#define RIO_ISA_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */ - -/***************************************************************************** -***************************** ***************************** -***************************** RIO (Rev2) ISA ***************************** -***************************** ***************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_ISA2_IDENT "JBJGPGGHINSMJPJR" - -#define RIO_ISA2_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_ISA2_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_ISA2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ -#define RIO_ISA2_CFG_16BIT 0x08 /* 16bit mode, else 8bit */ -#define RIO_ISA2_CFG_IRQMASK 0x30 /* Interrupt mask */ -#define RIO_ISA2_CFG_IRQ15 0x00 /* Interrupt Level 15 */ -#define RIO_ISA2_CFG_IRQ12 0x10 /* Interrupt Level 12 */ -#define RIO_ISA2_CFG_IRQ11 0x20 /* Interrupt Level 11 */ -#define RIO_ISA2_CFG_IRQ9 0x30 /* Interrupt Level 9 */ -#define RIO_ISA2_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ -#define RIO_ISA2_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */ - -/***************************************************************************** -***************************** ****************************** -***************************** RIO (Jet) ISA ****************************** -***************************** ****************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_ISA3_IDENT "JET HOST BY KEV#" - -#define RIO_ISA3_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_ISA3_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ -#define RIO_ISA32_CFG_IRQMASK 0xF30 /* Interrupt mask */ -#define RIO_ISA3_CFG_IRQ15 0xF0 /* Interrupt Level 15 */ -#define RIO_ISA3_CFG_IRQ12 0xC0 /* Interrupt Level 12 */ -#define RIO_ISA3_CFG_IRQ11 0xB0 /* Interrupt Level 11 */ -#define RIO_ISA3_CFG_IRQ10 0xA0 /* Interrupt Level 10 */ -#define RIO_ISA3_CFG_IRQ9 0x90 /* Interrupt Level 9 */ - -/***************************************************************************** -********************************* ******************************** -********************************* RIO MCA ******************************** -********************************* ******************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_MCA_IDENT "JBJGPGGHINSMJPJR" - -#define RIO_MCA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_MCA_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_MCA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ - -/***************************************************************************** -******************************** ******************************** -******************************** RIO EISA ******************************** -******************************** ******************************** -*****************************************************************************/ - -/* EISA Configuration Space Definitions... */ -#define EISA_PRODUCT_ID1 0xC80 -#define EISA_PRODUCT_ID2 0xC81 -#define EISA_PRODUCT_NUMBER 0xC82 -#define EISA_REVISION_NUMBER 0xC83 -#define EISA_CARD_ENABLE 0xC84 -#define EISA_VPD_UNIQUEID4 0xC88 /* READ: Unique Identifier #4 */ -#define EISA_VPD_UNIQUEID3 0xC8A /* READ: Unique Identifier #3 */ -#define EISA_VPD_UNIQUEID2 0xC90 /* READ: Unique Identifier #2 */ -#define EISA_VPD_UNIQUEID1 0xC92 /* READ: Unique Identifier #1 */ -#define EISA_VPD_MANU_YEAR 0xC98 /* READ: Year Of Manufacture (0 = 1970) */ -#define EISA_VPD_MANU_WEEK 0xC9A /* READ: Week Of Manufacture (0 = week 1 Jan) */ -#define EISA_MEM_ADDR_23_16 0xC00 -#define EISA_MEM_ADDR_31_24 0xC01 -#define EISA_RIO_CONFIG 0xC02 /* WRITE: Configuration Register */ -#define EISA_RIO_INTSET 0xC03 /* WRITE: Interrupt Set */ -#define EISA_RIO_INTRESET 0xC03 /* READ: Interrupt Reset */ - -/* Control Register Definitions... */ -#define RIO_EISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_EISA_CFG_LINK20 0x02 /* 20Mbps link, else 10Mbps */ -#define RIO_EISA_CFG_BUSENABLE 0x04 /* Enable processor bus */ -#define RIO_EISA_CFG_PROCRUN 0x08 /* Processor running, else reset */ -#define RIO_EISA_CFG_IRQMASK 0xF0 /* Interrupt mask */ -#define RIO_EISA_CFG_IRQ15 0xF0 /* Interrupt Level 15 */ -#define RIO_EISA_CFG_IRQ14 0xE0 /* Interrupt Level 14 */ -#define RIO_EISA_CFG_IRQ12 0xC0 /* Interrupt Level 12 */ -#define RIO_EISA_CFG_IRQ11 0xB0 /* Interrupt Level 11 */ -#define RIO_EISA_CFG_IRQ10 0xA0 /* Interrupt Level 10 */ -#define RIO_EISA_CFG_IRQ9 0x90 /* Interrupt Level 9 */ -#define RIO_EISA_CFG_IRQ7 0x70 /* Interrupt Level 7 */ -#define RIO_EISA_CFG_IRQ6 0x60 /* Interrupt Level 6 */ -#define RIO_EISA_CFG_IRQ5 0x50 /* Interrupt Level 5 */ -#define RIO_EISA_CFG_IRQ4 0x40 /* Interrupt Level 4 */ -#define RIO_EISA_CFG_IRQ3 0x30 /* Interrupt Level 3 */ - -/***************************************************************************** -******************************** ******************************** -******************************** RIO SBus ******************************** -******************************** ******************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_SBUS_IDENT "JBPGK#\0\0\0\0\0\0\0\0\0\0" - -#define RIO_SBUS_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_SBUS_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_SBUS_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ -#define RIO_SBUS_CFG_IRQMASK 0x38 /* Interrupt mask */ -#define RIO_SBUS_CFG_IRQNONE 0x00 /* No Interrupt */ -#define RIO_SBUS_CFG_IRQ7 0x38 /* Interrupt Level 7 */ -#define RIO_SBUS_CFG_IRQ6 0x30 /* Interrupt Level 6 */ -#define RIO_SBUS_CFG_IRQ5 0x28 /* Interrupt Level 5 */ -#define RIO_SBUS_CFG_IRQ4 0x20 /* Interrupt Level 4 */ -#define RIO_SBUS_CFG_IRQ3 0x18 /* Interrupt Level 3 */ -#define RIO_SBUS_CFG_IRQ2 0x10 /* Interrupt Level 2 */ -#define RIO_SBUS_CFG_IRQ1 0x08 /* Interrupt Level 1 */ -#define RIO_SBUS_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ -#define RIO_SBUS_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */ - -/***************************************************************************** -********************************* ******************************** -********************************* RIO PCI ******************************** -********************************* ******************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_PCI_IDENT "ECDDPGJGJHJRGSK#" - -#define RIO_PCI_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */ -#define RIO_PCI_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_PCI_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ -#define RIO_PCI_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */ -#define RIO_PCI_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */ - -/* PCI Definitions... */ -#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */ -#define SPX_DEVICE_ID 0x8000 /* RIO bridge boards */ -#define SPX_PLXDEVICE_ID 0x2000 /* PLX bridge boards */ -#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */ -#define RIO_SUB_SYS_ID 0x0800 /* RIO PCI board */ - -/***************************************************************************** -***************************** ****************************** -***************************** RIO (Jet) PCI ****************************** -***************************** ****************************** -*****************************************************************************/ - -/* Control Register Definitions... */ -#define RIO_PCI2_IDENT "JET HOST BY KEV#" - -#define RIO_PCI2_CFG_BUSENABLE 0x02 /* Enable processor bus */ -#define RIO_PCI2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */ - -/* PCI Definitions... */ -#define RIO2_SUB_SYS_ID 0x0100 /* RIO (Jet) PCI board */ - -#endif /*_rioboard_h */ - -/* End of RIOBOARD.H */ diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c deleted file mode 100644 index d956dd3..0000000 --- a/drivers/char/rio/rioboot.c +++ /dev/null @@ -1,1113 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioboot.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:36 -** Retrieved : 11/6/98 10:33:48 -** -** ident @(#)rioboot.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/termios.h> -#include <linux/serial.h> -#include <linux/vmalloc.h> -#include <linux/generic_serial.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" - -static int RIOBootComplete(struct rio_info *p, struct Host *HostP, unsigned int Rup, struct PktCmd __iomem *PktCmdP); - -static const unsigned char RIOAtVec2Ctrl[] = { - /* 0 */ INTERRUPT_DISABLE, - /* 1 */ INTERRUPT_DISABLE, - /* 2 */ INTERRUPT_DISABLE, - /* 3 */ INTERRUPT_DISABLE, - /* 4 */ INTERRUPT_DISABLE, - /* 5 */ INTERRUPT_DISABLE, - /* 6 */ INTERRUPT_DISABLE, - /* 7 */ INTERRUPT_DISABLE, - /* 8 */ INTERRUPT_DISABLE, - /* 9 */ IRQ_9 | INTERRUPT_ENABLE, - /* 10 */ INTERRUPT_DISABLE, - /* 11 */ IRQ_11 | INTERRUPT_ENABLE, - /* 12 */ IRQ_12 | INTERRUPT_ENABLE, - /* 13 */ INTERRUPT_DISABLE, - /* 14 */ INTERRUPT_DISABLE, - /* 15 */ IRQ_15 | INTERRUPT_ENABLE -}; - -/** - * RIOBootCodeRTA - Load RTA boot code - * @p: RIO to load - * @rbp: Download descriptor - * - * Called when the user process initiates booting of the card firmware. - * Lads the firmware - */ - -int RIOBootCodeRTA(struct rio_info *p, struct DownLoad * rbp) -{ - int offset; - - func_enter(); - - rio_dprintk(RIO_DEBUG_BOOT, "Data at user address %p\n", rbp->DataP); - - /* - ** Check that we have set asside enough memory for this - */ - if (rbp->Count > SIXTY_FOUR_K) { - rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n"); - p->RIOError.Error = HOST_FILE_TOO_LARGE; - func_exit(); - return -ENOMEM; - } - - if (p->RIOBooting) { - rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code : BUSY BUSY BUSY!\n"); - p->RIOError.Error = BOOT_IN_PROGRESS; - func_exit(); - return -EBUSY; - } - - /* - ** The data we load in must end on a (RTA_BOOT_DATA_SIZE) byte boundary, - ** so calculate how far we have to move the data up the buffer - ** to achieve this. - */ - offset = (RTA_BOOT_DATA_SIZE - (rbp->Count % RTA_BOOT_DATA_SIZE)) % RTA_BOOT_DATA_SIZE; - - /* - ** Be clean, and clear the 'unused' portion of the boot buffer, - ** because it will (eventually) be part of the Rta run time environment - ** and so should be zeroed. - */ - memset(p->RIOBootPackets, 0, offset); - - /* - ** Copy the data from user space into the array - */ - - if (copy_from_user(((u8 *)p->RIOBootPackets) + offset, rbp->DataP, rbp->Count)) { - rio_dprintk(RIO_DEBUG_BOOT, "Bad data copy from user space\n"); - p->RIOError.Error = COPYIN_FAILED; - func_exit(); - return -EFAULT; - } - - /* - ** Make sure that our copy of the size includes that offset we discussed - ** earlier. - */ - p->RIONumBootPkts = (rbp->Count + offset) / RTA_BOOT_DATA_SIZE; - p->RIOBootCount = rbp->Count; - - func_exit(); - return 0; -} - -/** - * rio_start_card_running - host card start - * @HostP: The RIO to kick off - * - * Start a RIO processor unit running. Encapsulates the knowledge - * of the card type. - */ - -void rio_start_card_running(struct Host *HostP) -{ - switch (HostP->Type) { - case RIO_AT: - rio_dprintk(RIO_DEBUG_BOOT, "Start ISA card running\n"); - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_ON | HostP->Mode | RIOAtVec2Ctrl[HostP->Ivec & 0xF], &HostP->Control); - break; - case RIO_PCI: - /* - ** PCI is much the same as MCA. Everything is once again memory - ** mapped, so we are writing to memory registers instead of io - ** ports. - */ - rio_dprintk(RIO_DEBUG_BOOT, "Start PCI card running\n"); - writeb(PCITpBootFromRam | PCITpBusEnable | HostP->Mode, &HostP->Control); - break; - default: - rio_dprintk(RIO_DEBUG_BOOT, "Unknown host type %d\n", HostP->Type); - break; - } - return; -} - -/* -** Load in the host boot code - load it directly onto all halted hosts -** of the correct type. -** -** Put your rubber pants on before messing with this code - even the magic -** numbers have trouble understanding what they are doing here. -*/ - -int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp) -{ - struct Host *HostP; - u8 __iomem *Cad; - PARM_MAP __iomem *ParmMapP; - int RupN; - int PortN; - unsigned int host; - u8 __iomem *StartP; - u8 __iomem *DestP; - int wait_count; - u16 OldParmMap; - u16 offset; /* It is very important that this is a u16 */ - u8 *DownCode = NULL; - unsigned long flags; - - HostP = NULL; /* Assure the compiler we've initialized it */ - - - /* Walk the hosts */ - for (host = 0; host < p->RIONumHosts; host++) { - rio_dprintk(RIO_DEBUG_BOOT, "Attempt to boot host %d\n", host); - HostP = &p->RIOHosts[host]; - - rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec); - - /* Don't boot hosts already running */ - if ((HostP->Flags & RUN_STATE) != RC_WAITING) { - rio_dprintk(RIO_DEBUG_BOOT, "%s %d already running\n", "Host", host); - continue; - } - - /* - ** Grab a pointer to the card (ioremapped) - */ - Cad = HostP->Caddr; - - /* - ** We are going to (try) and load in rbp->Count bytes. - ** The last byte will reside at p->RIOConf.HostLoadBase-1; - ** Therefore, we need to start copying at address - ** (caddr+p->RIOConf.HostLoadBase-rbp->Count) - */ - StartP = &Cad[p->RIOConf.HostLoadBase - rbp->Count]; - - rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for host is %p\n", Cad); - rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for download is %p\n", StartP); - rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase); - rio_dprintk(RIO_DEBUG_BOOT, "size of download is 0x%x\n", rbp->Count); - - /* Make sure it fits */ - if (p->RIOConf.HostLoadBase < rbp->Count) { - rio_dprintk(RIO_DEBUG_BOOT, "Bin too large\n"); - p->RIOError.Error = HOST_FILE_TOO_LARGE; - func_exit(); - return -EFBIG; - } - /* - ** Ensure that the host really is stopped. - ** Disable it's external bus & twang its reset line. - */ - RIOHostReset(HostP->Type, HostP->CardP, HostP->Slot); - - /* - ** Copy the data directly from user space to the SRAM. - ** This ain't going to be none too clever if the download - ** code is bigger than this segment. - */ - rio_dprintk(RIO_DEBUG_BOOT, "Copy in code\n"); - - /* Buffer to local memory as we want to use I/O space and - some cards only do 8 or 16 bit I/O */ - - DownCode = vmalloc(rbp->Count); - if (!DownCode) { - p->RIOError.Error = NOT_ENOUGH_CORE_FOR_PCI_COPY; - func_exit(); - return -ENOMEM; - } - if (copy_from_user(DownCode, rbp->DataP, rbp->Count)) { - kfree(DownCode); - p->RIOError.Error = COPYIN_FAILED; - func_exit(); - return -EFAULT; - } - HostP->Copy(DownCode, StartP, rbp->Count); - vfree(DownCode); - - rio_dprintk(RIO_DEBUG_BOOT, "Copy completed\n"); - - /* - ** S T O P ! - ** - ** Upto this point the code has been fairly rational, and possibly - ** even straight forward. What follows is a pile of crud that will - ** magically turn into six bytes of transputer assembler. Normally - ** you would expect an array or something, but, being me, I have - ** chosen [been told] to use a technique whereby the startup code - ** will be correct if we change the loadbase for the code. Which - ** brings us onto another issue - the loadbase is the *end* of the - ** code, not the start. - ** - ** If I were you I wouldn't start from here. - */ - - /* - ** We now need to insert a short boot section into - ** the memory at the end of Sram2. This is normally (de)composed - ** of the last eight bytes of the download code. The - ** download has been assembled/compiled to expect to be - ** loaded from 0x7FFF downwards. We have loaded it - ** at some other address. The startup code goes into the small - ** ram window at Sram2, in the last 8 bytes, which are really - ** at addresses 0x7FF8-0x7FFF. - ** - ** If the loadbase is, say, 0x7C00, then we need to branch to - ** address 0x7BFE to run the host.bin startup code. We assemble - ** this jump manually. - ** - ** The two byte sequence 60 08 is loaded into memory at address - ** 0x7FFE,F. This is a local branch to location 0x7FF8 (60 is nfix 0, - ** which adds '0' to the .O register, complements .O, and then shifts - ** it left by 4 bit positions, 08 is a jump .O+8 instruction. This will - ** add 8 to .O (which was 0xFFF0), and will branch RELATIVE to the new - ** location. Now, the branch starts from the value of .PC (or .IP or - ** whatever the bloody register is called on this chip), and the .PC - ** will be pointing to the location AFTER the branch, in this case - ** .PC == 0x8000, so the branch will be to 0x8000+0xFFF8 = 0x7FF8. - ** - ** A long branch is coded at 0x7FF8. This consists of loading a four - ** byte offset into .O using nfix (as above) and pfix operators. The - ** pfix operates in exactly the same way as the nfix operator, but - ** without the complement operation. The offset, of course, must be - ** relative to the address of the byte AFTER the branch instruction, - ** which will be (urm) 0x7FFC, so, our final destination of the branch - ** (loadbase-2), has to be reached from here. Imagine that the loadbase - ** is 0x7C00 (which it is), then we will need to branch to 0x7BFE (which - ** is the first byte of the initial two byte short local branch of the - ** download code). - ** - ** To code a jump from 0x7FFC (which is where the branch will start - ** from) to 0x7BFE, we will need to branch 0xFC02 bytes (0x7FFC+0xFC02)= - ** 0x7BFE. - ** This will be coded as four bytes: - ** 60 2C 20 02 - ** being nfix .O+0 - ** pfix .O+C - ** pfix .O+0 - ** jump .O+2 - ** - ** The nfix operator is used, so that the startup code will be - ** compatible with the whole Tp family. (lies, damn lies, it'll never - ** work in a month of Sundays). - ** - ** The nfix nyble is the 1s complement of the nyble value you - ** want to load - in this case we wanted 'F' so we nfix loaded '0'. - */ - - - /* - ** Dest points to the top 8 bytes of Sram2. The Tp jumps - ** to 0x7FFE at reset time, and starts executing. This is - ** a short branch to 0x7FF8, where a long branch is coded. - */ - - DestP = &Cad[0x7FF8]; /* <<<---- READ THE ABOVE COMMENTS */ - -#define NFIX(N) (0x60 | (N)) /* .O = (~(.O + N))<<4 */ -#define PFIX(N) (0x20 | (N)) /* .O = (.O + N)<<4 */ -#define JUMP(N) (0x00 | (N)) /* .PC = .PC + .O */ - - /* - ** 0x7FFC is the address of the location following the last byte of - ** the four byte jump instruction. - ** READ THE ABOVE COMMENTS - ** - ** offset is (TO-FROM) % MEMSIZE, but with compound buggering about. - ** Memsize is 64K for this range of Tp, so offset is a short (unsigned, - ** cos I don't understand 2's complement). - */ - offset = (p->RIOConf.HostLoadBase - 2) - 0x7FFC; - - writeb(NFIX(((unsigned short) (~offset) >> (unsigned short) 12) & 0xF), DestP); - writeb(PFIX((offset >> 8) & 0xF), DestP + 1); - writeb(PFIX((offset >> 4) & 0xF), DestP + 2); - writeb(JUMP(offset & 0xF), DestP + 3); - - writeb(NFIX(0), DestP + 6); - writeb(JUMP(8), DestP + 7); - - rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase); - rio_dprintk(RIO_DEBUG_BOOT, "startup offset is 0x%x\n", offset); - - /* - ** Flag what is going on - */ - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_STARTUP; - - /* - ** Grab a copy of the current ParmMap pointer, so we - ** can tell when it has changed. - */ - OldParmMap = readw(&HostP->__ParmMapR); - - rio_dprintk(RIO_DEBUG_BOOT, "Original parmmap is 0x%x\n", OldParmMap); - - /* - ** And start it running (I hope). - ** As there is nothing dodgy or obscure about the - ** above code, this is guaranteed to work every time. - */ - rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec); - - rio_start_card_running(HostP); - - rio_dprintk(RIO_DEBUG_BOOT, "Set control port\n"); - - /* - ** Now, wait for upto five seconds for the Tp to setup the parmmap - ** pointer: - */ - for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && (readw(&HostP->__ParmMapR) == OldParmMap); wait_count++) { - rio_dprintk(RIO_DEBUG_BOOT, "Checkout %d, 0x%x\n", wait_count, readw(&HostP->__ParmMapR)); - mdelay(100); - - } - - /* - ** If the parmmap pointer is unchanged, then the host code - ** has crashed & burned in a really spectacular way - */ - if (readw(&HostP->__ParmMapR) == OldParmMap) { - rio_dprintk(RIO_DEBUG_BOOT, "parmmap 0x%x\n", readw(&HostP->__ParmMapR)); - rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail\n"); - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_STUFFED; - RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); - continue; - } - - rio_dprintk(RIO_DEBUG_BOOT, "Running 0x%x\n", readw(&HostP->__ParmMapR)); - - /* - ** Well, the board thought it was OK, and setup its parmmap - ** pointer. For the time being, we will pretend that this - ** board is running, and check out what the error flag says. - */ - - /* - ** Grab a 32 bit pointer to the parmmap structure - */ - ParmMapP = (PARM_MAP __iomem *) RIO_PTR(Cad, readw(&HostP->__ParmMapR)); - rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %p\n", ParmMapP); - ParmMapP = (PARM_MAP __iomem *)(Cad + readw(&HostP->__ParmMapR)); - rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %p\n", ParmMapP); - - /* - ** The links entry should be 0xFFFF; we set it up - ** with a mask to say how many PHBs to use, and - ** which links to use. - */ - if (readw(&ParmMapP->links) != 0xFFFF) { - rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name); - rio_dprintk(RIO_DEBUG_BOOT, "Links = 0x%x\n", readw(&ParmMapP->links)); - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_STUFFED; - RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); - continue; - } - - writew(RIO_LINK_ENABLE, &ParmMapP->links); - - /* - ** now wait for the card to set all the parmmap->XXX stuff - ** this is a wait of upto two seconds.... - */ - rio_dprintk(RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n", p->RIOConf.StartupTime); - HostP->timeout_id = 0; - for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && !readw(&ParmMapP->init_done); wait_count++) { - rio_dprintk(RIO_DEBUG_BOOT, "Waiting for init_done\n"); - mdelay(100); - } - rio_dprintk(RIO_DEBUG_BOOT, "OK! init_done!\n"); - - if (readw(&ParmMapP->error) != E_NO_ERROR || !readw(&ParmMapP->init_done)) { - rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name); - rio_dprintk(RIO_DEBUG_BOOT, "Timedout waiting for init_done\n"); - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_STUFFED; - RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot ); - continue; - } - - rio_dprintk(RIO_DEBUG_BOOT, "Got init_done\n"); - - /* - ** It runs! It runs! - */ - rio_dprintk(RIO_DEBUG_BOOT, "Host ID %x Running\n", HostP->UniqueNum); - - /* - ** set the time period between interrupts. - */ - writew(p->RIOConf.Timer, &ParmMapP->timer); - - /* - ** Translate all the 16 bit pointers in the __ParmMapR into - ** 32 bit pointers for the driver in ioremap space. - */ - HostP->ParmMapP = ParmMapP; - HostP->PhbP = (struct PHB __iomem *) RIO_PTR(Cad, readw(&ParmMapP->phb_ptr)); - HostP->RupP = (struct RUP __iomem *) RIO_PTR(Cad, readw(&ParmMapP->rups)); - HostP->PhbNumP = (unsigned short __iomem *) RIO_PTR(Cad, readw(&ParmMapP->phb_num_ptr)); - HostP->LinkStrP = (struct LPB __iomem *) RIO_PTR(Cad, readw(&ParmMapP->link_str_ptr)); - - /* - ** point the UnixRups at the real Rups - */ - for (RupN = 0; RupN < MAX_RUP; RupN++) { - HostP->UnixRups[RupN].RupP = &HostP->RupP[RupN]; - HostP->UnixRups[RupN].Id = RupN + 1; - HostP->UnixRups[RupN].BaseSysPort = NO_PORT; - spin_lock_init(&HostP->UnixRups[RupN].RupLock); - } - - for (RupN = 0; RupN < LINKS_PER_UNIT; RupN++) { - HostP->UnixRups[RupN + MAX_RUP].RupP = &HostP->LinkStrP[RupN].rup; - HostP->UnixRups[RupN + MAX_RUP].Id = 0; - HostP->UnixRups[RupN + MAX_RUP].BaseSysPort = NO_PORT; - spin_lock_init(&HostP->UnixRups[RupN + MAX_RUP].RupLock); - } - - /* - ** point the PortP->Phbs at the real Phbs - */ - for (PortN = p->RIOFirstPortsMapped; PortN < p->RIOLastPortsMapped + PORTS_PER_RTA; PortN++) { - if (p->RIOPortp[PortN]->HostP == HostP) { - struct Port *PortP = p->RIOPortp[PortN]; - struct PHB __iomem *PhbP; - /* int oldspl; */ - - if (!PortP->Mapped) - continue; - - PhbP = &HostP->PhbP[PortP->HostPort]; - rio_spin_lock_irqsave(&PortP->portSem, flags); - - PortP->PhbP = PhbP; - - PortP->TxAdd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_add)); - PortP->TxStart = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_start)); - PortP->TxEnd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_end)); - PortP->RxRemove = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_remove)); - PortP->RxStart = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_start)); - PortP->RxEnd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_end)); - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - /* - ** point the UnixRup at the base SysPort - */ - if (!(PortN % PORTS_PER_RTA)) - HostP->UnixRups[PortP->RupNum].BaseSysPort = PortN; - } - } - - rio_dprintk(RIO_DEBUG_BOOT, "Set the card running... \n"); - /* - ** last thing - show the world that everything is in place - */ - HostP->Flags &= ~RUN_STATE; - HostP->Flags |= RC_RUNNING; - } - /* - ** MPX always uses a poller. This is actually patched into the system - ** configuration and called directly from each clock tick. - ** - */ - p->RIOPolling = 1; - - p->RIOSystemUp++; - - rio_dprintk(RIO_DEBUG_BOOT, "Done everything %x\n", HostP->Ivec); - func_exit(); - return 0; -} - - - -/** - * RIOBootRup - Boot an RTA - * @p: rio we are working with - * @Rup: Rup number - * @HostP: host object - * @PacketP: packet to use - * - * If we have successfully processed this boot, then - * return 1. If we havent, then return 0. - */ - -int RIOBootRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem *PacketP) -{ - struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data; - struct PktCmd_M *PktReplyP; - struct CmdBlk *CmdBlkP; - unsigned int sequence; - - /* - ** If we haven't been told what to boot, we can't boot it. - */ - if (p->RIONumBootPkts == 0) { - rio_dprintk(RIO_DEBUG_BOOT, "No RTA code to download yet\n"); - return 0; - } - - /* - ** Special case of boot completed - if we get one of these then we - ** don't need a command block. For all other cases we do, so handle - ** this first and then get a command block, then handle every other - ** case, relinquishing the command block if disaster strikes! - */ - if ((readb(&PacketP->len) & PKT_CMD_BIT) && (readb(&PktCmdP->Command) == BOOT_COMPLETED)) - return RIOBootComplete(p, HostP, Rup, PktCmdP); - - /* - ** Try to allocate a command block. This is in kernel space - */ - if (!(CmdBlkP = RIOGetCmdBlk())) { - rio_dprintk(RIO_DEBUG_BOOT, "No command blocks to boot RTA! come back later.\n"); - return 0; - } - - /* - ** Fill in the default info on the command block - */ - CmdBlkP->Packet.dest_unit = Rup < (unsigned short) MAX_RUP ? Rup : 0; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - - CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; - PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data; - - /* - ** process COMMANDS on the boot rup! - */ - if (readb(&PacketP->len) & PKT_CMD_BIT) { - /* - ** We only expect one type of command - a BOOT_REQUEST! - */ - if (readb(&PktCmdP->Command) != BOOT_REQUEST) { - rio_dprintk(RIO_DEBUG_BOOT, "Unexpected command %d on BOOT RUP %d of host %Zd\n", readb(&PktCmdP->Command), Rup, HostP - p->RIOHosts); - RIOFreeCmdBlk(CmdBlkP); - return 1; - } - - /* - ** Build a Boot Sequence command block - ** - ** We no longer need to use "Boot Mode", we'll always allow - ** boot requests - the boot will not complete if the device - ** appears in the bindings table. - ** - ** We'll just (always) set the command field in packet reply - ** to allow an attempted boot sequence : - */ - PktReplyP->Command = BOOT_SEQUENCE; - - PktReplyP->BootSequence.NumPackets = p->RIONumBootPkts; - PktReplyP->BootSequence.LoadBase = p->RIOConf.RtaLoadBase; - PktReplyP->BootSequence.CodeSize = p->RIOBootCount; - - CmdBlkP->Packet.len = BOOT_SEQUENCE_LEN | PKT_CMD_BIT; - - memcpy((void *) &CmdBlkP->Packet.data[BOOT_SEQUENCE_LEN], "BOOT", 4); - - rio_dprintk(RIO_DEBUG_BOOT, "Boot RTA on Host %Zd Rup %d - %d (0x%x) packets to 0x%x\n", HostP - p->RIOHosts, Rup, p->RIONumBootPkts, p->RIONumBootPkts, p->RIOConf.RtaLoadBase); - - /* - ** If this host is in slave mode, send the RTA an invalid boot - ** sequence command block to force it to kill the boot. We wait - ** for half a second before sending this packet to prevent the RTA - ** attempting to boot too often. The master host should then grab - ** the RTA and make it its own. - */ - p->RIOBooting++; - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; - } - - /* - ** It is a request for boot data. - */ - sequence = readw(&PktCmdP->Sequence); - - rio_dprintk(RIO_DEBUG_BOOT, "Boot block %d on Host %Zd Rup%d\n", sequence, HostP - p->RIOHosts, Rup); - - if (sequence >= p->RIONumBootPkts) { - rio_dprintk(RIO_DEBUG_BOOT, "Got a request for packet %d, max is %d\n", sequence, p->RIONumBootPkts); - } - - PktReplyP->Sequence = sequence; - memcpy(PktReplyP->BootData, p->RIOBootPackets[p->RIONumBootPkts - sequence - 1], RTA_BOOT_DATA_SIZE); - CmdBlkP->Packet.len = PKT_MAX_DATA_LEN; - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; -} - -/** - * RIOBootComplete - RTA boot is done - * @p: RIO we are working with - * @HostP: Host structure - * @Rup: RUP being used - * @PktCmdP: Packet command that was used - * - * This function is called when an RTA been booted. - * If booted by a host, HostP->HostUniqueNum is the booting host. - * If booted by an RTA, HostP->Mapping[Rup].RtaUniqueNum is the booting RTA. - * RtaUniq is the booted RTA. - */ - -static int RIOBootComplete(struct rio_info *p, struct Host *HostP, unsigned int Rup, struct PktCmd __iomem *PktCmdP) -{ - struct Map *MapP = NULL; - struct Map *MapP2 = NULL; - int Flag; - int found; - int host, rta; - int EmptySlot = -1; - int entry, entry2; - char *MyType, *MyName; - unsigned int MyLink; - unsigned short RtaType; - u32 RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24); - - p->RIOBooting = 0; - - rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot completed - BootInProgress now %d\n", p->RIOBooting); - - /* - ** Determine type of unit (16/8 port RTA). - */ - - RtaType = GetUnitType(RtaUniq); - if (Rup >= (unsigned short) MAX_RUP) - rio_dprintk(RIO_DEBUG_BOOT, "RIO: Host %s has booted an RTA(%d) on link %c\n", HostP->Name, 8 * RtaType, readb(&PktCmdP->LinkNum) + 'A'); - else - rio_dprintk(RIO_DEBUG_BOOT, "RIO: RTA %s has booted an RTA(%d) on link %c\n", HostP->Mapping[Rup].Name, 8 * RtaType, readb(&PktCmdP->LinkNum) + 'A'); - - rio_dprintk(RIO_DEBUG_BOOT, "UniqNum is 0x%x\n", RtaUniq); - - if (RtaUniq == 0x00000000 || RtaUniq == 0xffffffff) { - rio_dprintk(RIO_DEBUG_BOOT, "Illegal RTA Uniq Number\n"); - return 1; - } - - /* - ** If this RTA has just booted an RTA which doesn't belong to this - ** system, or the system is in slave mode, do not attempt to create - ** a new table entry for it. - */ - - if (!RIOBootOk(p, HostP, RtaUniq)) { - MyLink = readb(&PktCmdP->LinkNum); - if (Rup < (unsigned short) MAX_RUP) { - /* - ** RtaUniq was clone booted (by this RTA). Instruct this RTA - ** to hold off further attempts to boot on this link for 30 - ** seconds. - */ - if (RIOSuspendBootRta(HostP, HostP->Mapping[Rup].ID, MyLink)) { - rio_dprintk(RIO_DEBUG_BOOT, "RTA failed to suspend booting on link %c\n", 'A' + MyLink); - } - } else - /* - ** RtaUniq was booted by this host. Set the booting link - ** to hold off for 30 seconds to give another unit a - ** chance to boot it. - */ - writew(30, &HostP->LinkStrP[MyLink].WaitNoBoot); - rio_dprintk(RIO_DEBUG_BOOT, "RTA %x not owned - suspend booting down link %c on unit %x\n", RtaUniq, 'A' + MyLink, HostP->Mapping[Rup].RtaUniqueNum); - return 1; - } - - /* - ** Check for a SLOT_IN_USE entry for this RTA attached to the - ** current host card in the driver table. - ** - ** If it exists, make a note that we have booted it. Other parts of - ** the driver are interested in this information at a later date, - ** in particular when the booting RTA asks for an ID for this unit, - ** we must have set the BOOTED flag, and the NEWBOOT flag is used - ** to force an open on any ports that where previously open on this - ** unit. - */ - for (entry = 0; entry < MAX_RUP; entry++) { - unsigned int sysport; - - if ((HostP->Mapping[entry].Flags & SLOT_IN_USE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) { - HostP->Mapping[entry].Flags |= RTA_BOOTED | RTA_NEWBOOT; - if ((sysport = HostP->Mapping[entry].SysPort) != NO_PORT) { - if (sysport < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = sysport; - if (sysport > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = sysport; - /* - ** For a 16 port RTA, check the second bank of 8 ports - */ - if (RtaType == TYPE_RTA16) { - entry2 = HostP->Mapping[entry].ID2 - 1; - HostP->Mapping[entry2].Flags |= RTA_BOOTED | RTA_NEWBOOT; - sysport = HostP->Mapping[entry2].SysPort; - if (sysport < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = sysport; - if (sysport > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = sysport; - } - } - if (RtaType == TYPE_RTA16) - rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given IDs %d+%d\n", entry + 1, entry2 + 1); - else - rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given ID %d\n", entry + 1); - return 1; - } - } - - rio_dprintk(RIO_DEBUG_BOOT, "RTA not configured for this host\n"); - - if (Rup >= (unsigned short) MAX_RUP) { - /* - ** It was a host that did the booting - */ - MyType = "Host"; - MyName = HostP->Name; - } else { - /* - ** It was an RTA that did the booting - */ - MyType = "RTA"; - MyName = HostP->Mapping[Rup].Name; - } - MyLink = readb(&PktCmdP->LinkNum); - - /* - ** There is no SLOT_IN_USE entry for this RTA attached to the current - ** host card in the driver table. - ** - ** Check for a SLOT_TENTATIVE entry for this RTA attached to the - ** current host card in the driver table. - ** - ** If we find one, then we re-use that slot. - */ - for (entry = 0; entry < MAX_RUP; entry++) { - if ((HostP->Mapping[entry].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) { - if (RtaType == TYPE_RTA16) { - entry2 = HostP->Mapping[entry].ID2 - 1; - if ((HostP->Mapping[entry2].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry2].RtaUniqueNum == RtaUniq)) - rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slots (%d+%d)\n", entry, entry2); - else - continue; - } else - rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slot (%d)\n", entry); - if (!p->RIONoMessage) - printk("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A'); - return 1; - } - } - - /* - ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA - ** attached to the current host card in the driver table. - ** - ** Check if there is a SLOT_IN_USE or SLOT_TENTATIVE entry on another - ** host for this RTA in the driver table. - ** - ** For a SLOT_IN_USE entry on another host, we need to delete the RTA - ** entry from the other host and add it to this host (using some of - ** the functions from table.c which do this). - ** For a SLOT_TENTATIVE entry on another host, we must cope with the - ** following scenario: - ** - ** + Plug 8 port RTA into host A. (This creates SLOT_TENTATIVE entry - ** in table) - ** + Unplug RTA and plug into host B. (We now have 2 SLOT_TENTATIVE - ** entries) - ** + Configure RTA on host B. (This slot now becomes SLOT_IN_USE) - ** + Unplug RTA and plug back into host A. - ** + Configure RTA on host A. We now have the same RTA configured - ** with different ports on two different hosts. - */ - rio_dprintk(RIO_DEBUG_BOOT, "Have we seen RTA %x before?\n", RtaUniq); - found = 0; - Flag = 0; /* Convince the compiler this variable is initialized */ - for (host = 0; !found && (host < p->RIONumHosts); host++) { - for (rta = 0; rta < MAX_RUP; rta++) { - if ((p->RIOHosts[host].Mapping[rta].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (p->RIOHosts[host].Mapping[rta].RtaUniqueNum == RtaUniq)) { - Flag = p->RIOHosts[host].Mapping[rta].Flags; - MapP = &p->RIOHosts[host].Mapping[rta]; - if (RtaType == TYPE_RTA16) { - MapP2 = &p->RIOHosts[host].Mapping[MapP->ID2 - 1]; - rio_dprintk(RIO_DEBUG_BOOT, "This RTA is units %d+%d from host %s\n", rta + 1, MapP->ID2, p->RIOHosts[host].Name); - } else - rio_dprintk(RIO_DEBUG_BOOT, "This RTA is unit %d from host %s\n", rta + 1, p->RIOHosts[host].Name); - found = 1; - break; - } - } - } - - /* - ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA - ** attached to the current host card in the driver table. - ** - ** If we have not found a SLOT_IN_USE or SLOT_TENTATIVE entry on - ** another host for this RTA in the driver table... - ** - ** Check for a SLOT_IN_USE entry for this RTA in the config table. - */ - if (!MapP) { - rio_dprintk(RIO_DEBUG_BOOT, "Look for RTA %x in RIOSavedTable\n", RtaUniq); - for (rta = 0; rta < TOTAL_MAP_ENTRIES; rta++) { - rio_dprintk(RIO_DEBUG_BOOT, "Check table entry %d (%x)", rta, p->RIOSavedTable[rta].RtaUniqueNum); - - if ((p->RIOSavedTable[rta].Flags & SLOT_IN_USE) && (p->RIOSavedTable[rta].RtaUniqueNum == RtaUniq)) { - MapP = &p->RIOSavedTable[rta]; - Flag = p->RIOSavedTable[rta].Flags; - if (RtaType == TYPE_RTA16) { - for (entry2 = rta + 1; entry2 < TOTAL_MAP_ENTRIES; entry2++) { - if (p->RIOSavedTable[entry2].RtaUniqueNum == RtaUniq) - break; - } - MapP2 = &p->RIOSavedTable[entry2]; - rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entries %d+%d\n", rta, entry2); - } else - rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entry %d\n", rta); - break; - } - } - } - - /* - ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA - ** attached to the current host card in the driver table. - ** - ** We may have found a SLOT_IN_USE entry on another host for this - ** RTA in the config table, or a SLOT_IN_USE or SLOT_TENTATIVE entry - ** on another host for this RTA in the driver table. - ** - ** Check the driver table for room to fit this newly discovered RTA. - ** RIOFindFreeID() first looks for free slots and if it does not - ** find any free slots it will then attempt to oust any - ** tentative entry in the table. - */ - EmptySlot = 1; - if (RtaType == TYPE_RTA16) { - if (RIOFindFreeID(p, HostP, &entry, &entry2) == 0) { - RIODefaultName(p, HostP, entry); - rio_fill_host_slot(entry, entry2, RtaUniq, HostP); - EmptySlot = 0; - } - } else { - if (RIOFindFreeID(p, HostP, &entry, NULL) == 0) { - RIODefaultName(p, HostP, entry); - rio_fill_host_slot(entry, 0, RtaUniq, HostP); - EmptySlot = 0; - } - } - - /* - ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA - ** attached to the current host card in the driver table. - ** - ** If we found a SLOT_IN_USE entry on another host for this - ** RTA in the config or driver table, and there are enough free - ** slots in the driver table, then we need to move it over and - ** delete it from the other host. - ** If we found a SLOT_TENTATIVE entry on another host for this - ** RTA in the driver table, just delete the other host entry. - */ - if (EmptySlot == 0) { - if (MapP) { - if (Flag & SLOT_IN_USE) { - rio_dprintk(RIO_DEBUG_BOOT, "This RTA configured on another host - move entry to current host (1)\n"); - HostP->Mapping[entry].SysPort = MapP->SysPort; - memcpy(HostP->Mapping[entry].Name, MapP->Name, MAX_NAME_LEN); - HostP->Mapping[entry].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT; - RIOReMapPorts(p, HostP, &HostP->Mapping[entry]); - if (HostP->Mapping[entry].SysPort < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = HostP->Mapping[entry].SysPort; - if (HostP->Mapping[entry].SysPort > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = HostP->Mapping[entry].SysPort; - rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) MapP->SysPort, MapP->Name); - } else { - rio_dprintk(RIO_DEBUG_BOOT, "This RTA has a tentative entry on another host - delete that entry (1)\n"); - HostP->Mapping[entry].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT; - } - if (RtaType == TYPE_RTA16) { - if (Flag & SLOT_IN_USE) { - HostP->Mapping[entry2].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT; - HostP->Mapping[entry2].SysPort = MapP2->SysPort; - /* - ** Map second block of ttys for 16 port RTA - */ - RIOReMapPorts(p, HostP, &HostP->Mapping[entry2]); - if (HostP->Mapping[entry2].SysPort < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = HostP->Mapping[entry2].SysPort; - if (HostP->Mapping[entry2].SysPort > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = HostP->Mapping[entry2].SysPort; - rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) HostP->Mapping[entry2].SysPort, HostP->Mapping[entry].Name); - } else - HostP->Mapping[entry2].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT; - memset(MapP2, 0, sizeof(struct Map)); - } - memset(MapP, 0, sizeof(struct Map)); - if (!p->RIONoMessage) - printk("An orphaned RTA has been adopted by %s '%s' (%c).\n", MyType, MyName, MyLink + 'A'); - } else if (!p->RIONoMessage) - printk("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A'); - RIOSetChange(p); - return 1; - } - - /* - ** There is no room in the driver table to make an entry for the - ** booted RTA. Keep a note of its Uniq Num in the overflow table, - ** so we can ignore it's ID requests. - */ - if (!p->RIONoMessage) - printk("The RTA connected to %s '%s' (%c) cannot be configured. You cannot configure more than 128 ports to one host card.\n", MyType, MyName, MyLink + 'A'); - for (entry = 0; entry < HostP->NumExtraBooted; entry++) { - if (HostP->ExtraUnits[entry] == RtaUniq) { - /* - ** already got it! - */ - return 1; - } - } - /* - ** If there is room, add the unit to the list of extras - */ - if (HostP->NumExtraBooted < MAX_EXTRA_UNITS) - HostP->ExtraUnits[HostP->NumExtraBooted++] = RtaUniq; - return 1; -} - - -/* -** If the RTA or its host appears in the RIOBindTab[] structure then -** we mustn't boot the RTA and should return 0. -** This operation is slightly different from the other drivers for RIO -** in that this is designed to work with the new utilities -** not config.rio and is FAR SIMPLER. -** We no longer support the RIOBootMode variable. It is all done from the -** "boot/noboot" field in the rio.cf file. -*/ -int RIOBootOk(struct rio_info *p, struct Host *HostP, unsigned long RtaUniq) -{ - int Entry; - unsigned int HostUniq = HostP->UniqueNum; - - /* - ** Search bindings table for RTA or its parent. - ** If it exists, return 0, else 1. - */ - for (Entry = 0; (Entry < MAX_RTA_BINDINGS) && (p->RIOBindTab[Entry] != 0); Entry++) { - if ((p->RIOBindTab[Entry] == HostUniq) || (p->RIOBindTab[Entry] == RtaUniq)) - return 0; - } - return 1; -} - -/* -** Make an empty slot tentative. If this is a 16 port RTA, make both -** slots tentative, and the second one RTA_SECOND_SLOT as well. -*/ - -void rio_fill_host_slot(int entry, int entry2, unsigned int rta_uniq, struct Host *host) -{ - int link; - - rio_dprintk(RIO_DEBUG_BOOT, "rio_fill_host_slot(%d, %d, 0x%x...)\n", entry, entry2, rta_uniq); - - host->Mapping[entry].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE); - host->Mapping[entry].SysPort = NO_PORT; - host->Mapping[entry].RtaUniqueNum = rta_uniq; - host->Mapping[entry].HostUniqueNum = host->UniqueNum; - host->Mapping[entry].ID = entry + 1; - host->Mapping[entry].ID2 = 0; - if (entry2) { - host->Mapping[entry2].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE | RTA16_SECOND_SLOT); - host->Mapping[entry2].SysPort = NO_PORT; - host->Mapping[entry2].RtaUniqueNum = rta_uniq; - host->Mapping[entry2].HostUniqueNum = host->UniqueNum; - host->Mapping[entry2].Name[0] = '\0'; - host->Mapping[entry2].ID = entry2 + 1; - host->Mapping[entry2].ID2 = entry + 1; - host->Mapping[entry].ID2 = entry2 + 1; - } - /* - ** Must set these up, so that utilities show - ** topology of 16 port RTAs correctly - */ - for (link = 0; link < LINKS_PER_UNIT; link++) { - host->Mapping[entry].Topology[link].Unit = ROUTE_DISCONNECT; - host->Mapping[entry].Topology[link].Link = NO_LINK; - if (entry2) { - host->Mapping[entry2].Topology[link].Unit = ROUTE_DISCONNECT; - host->Mapping[entry2].Topology[link].Link = NO_LINK; - } - } -} diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c deleted file mode 100644 index f121357..0000000 --- a/drivers/char/rio/riocmd.c +++ /dev/null @@ -1,939 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** ported from the existing SCO driver source -** - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riocmd.c -** SID : 1.2 -** Last Modified : 11/6/98 10:33:41 -** Retrieved : 11/6/98 10:33:49 -** -** ident @(#)riocmd.c 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - -#include <linux/termios.h> -#include <linux/serial.h> - -#include <linux/generic_serial.h> - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" - - -static struct IdentifyRta IdRta; -static struct KillNeighbour KillUnit; - -int RIOFoadRta(struct Host *HostP, struct Map *MapP) -{ - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA\n"); - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = MapP->ID; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = IFOAD; - CmdBlkP->Packet.data[1] = 0; - CmdBlkP->Packet.data[2] = IFOAD_MAGIC & 0xFF; - CmdBlkP->Packet.data[3] = (IFOAD_MAGIC >> 8) & 0xFF; - - if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: Failed to queue foad command\n"); - return -EIO; - } - return 0; -} - -int RIOZombieRta(struct Host *HostP, struct Map *MapP) -{ - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA\n"); - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = MapP->ID; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = ZOMBIE; - CmdBlkP->Packet.data[1] = 0; - CmdBlkP->Packet.data[2] = ZOMBIE_MAGIC & 0xFF; - CmdBlkP->Packet.data[3] = (ZOMBIE_MAGIC >> 8) & 0xFF; - - if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: Failed to queue zombie command\n"); - return -EIO; - } - return 0; -} - -int RIOCommandRta(struct rio_info *p, unsigned long RtaUnique, int (*func) (struct Host * HostP, struct Map * MapP)) -{ - unsigned int Host; - - rio_dprintk(RIO_DEBUG_CMD, "Command RTA 0x%lx func %p\n", RtaUnique, func); - - if (!RtaUnique) - return (0); - - for (Host = 0; Host < p->RIONumHosts; Host++) { - unsigned int Rta; - struct Host *HostP = &p->RIOHosts[Host]; - - for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) { - struct Map *MapP = &HostP->Mapping[Rta]; - - if (MapP->RtaUniqueNum == RtaUnique) { - uint Link; - - /* - ** now, lets just check we have a route to it... - ** IF the routing stuff is working, then one of the - ** topology entries for this unit will have a legit - ** route *somewhere*. We care not where - if its got - ** any connections, we can get to it. - */ - for (Link = 0; Link < LINKS_PER_UNIT; Link++) { - if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) { - /* - ** Its worth trying the operation... - */ - return (*func) (HostP, MapP); - } - } - } - } - } - return -ENXIO; -} - - -int RIOIdentifyRta(struct rio_info *p, void __user * arg) -{ - unsigned int Host; - - if (copy_from_user(&IdRta, arg, sizeof(IdRta))) { - rio_dprintk(RIO_DEBUG_CMD, "RIO_IDENTIFY_RTA copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - - for (Host = 0; Host < p->RIONumHosts; Host++) { - unsigned int Rta; - struct Host *HostP = &p->RIOHosts[Host]; - - for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) { - struct Map *MapP = &HostP->Mapping[Rta]; - - if (MapP->RtaUniqueNum == IdRta.RtaUnique) { - uint Link; - /* - ** now, lets just check we have a route to it... - ** IF the routing stuff is working, then one of the - ** topology entries for this unit will have a legit - ** route *somewhere*. We care not where - if its got - ** any connections, we can get to it. - */ - for (Link = 0; Link < LINKS_PER_UNIT; Link++) { - if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) { - /* - ** Its worth trying the operation... - */ - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA\n"); - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = MapP->ID; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = IDENTIFY; - CmdBlkP->Packet.data[1] = 0; - CmdBlkP->Packet.data[2] = IdRta.ID; - - if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: Failed to queue command\n"); - return -EIO; - } - return 0; - } - } - } - } - } - return -ENOENT; -} - - -int RIOKillNeighbour(struct rio_info *p, void __user * arg) -{ - uint Host; - uint ID; - struct Host *HostP; - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "KILL HOST NEIGHBOUR\n"); - - if (copy_from_user(&KillUnit, arg, sizeof(KillUnit))) { - rio_dprintk(RIO_DEBUG_CMD, "RIO_KILL_NEIGHBOUR copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - - if (KillUnit.Link > 3) - return -ENXIO; - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "UFOAD: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = 0; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = UFOAD; - CmdBlkP->Packet.data[1] = KillUnit.Link; - CmdBlkP->Packet.data[2] = UFOAD_MAGIC & 0xFF; - CmdBlkP->Packet.data[3] = (UFOAD_MAGIC >> 8) & 0xFF; - - for (Host = 0; Host < p->RIONumHosts; Host++) { - ID = 0; - HostP = &p->RIOHosts[Host]; - - if (HostP->UniqueNum == KillUnit.UniqueNum) { - if (RIOQueueCmdBlk(HostP, RTAS_PER_HOST + KillUnit.Link, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n"); - return -EIO; - } - return 0; - } - - for (ID = 0; ID < RTAS_PER_HOST; ID++) { - if (HostP->Mapping[ID].RtaUniqueNum == KillUnit.UniqueNum) { - CmdBlkP->Packet.dest_unit = ID + 1; - if (RIOQueueCmdBlk(HostP, ID, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n"); - return -EIO; - } - return 0; - } - } - } - RIOFreeCmdBlk(CmdBlkP); - return -ENXIO; -} - -int RIOSuspendBootRta(struct Host *HostP, int ID, int Link) -{ - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA ID %d, link %c\n", ID, 'A' + Link); - - CmdBlkP = RIOGetCmdBlk(); - - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: GetCmdBlk failed\n"); - return -ENXIO; - } - - CmdBlkP->Packet.dest_unit = ID; - CmdBlkP->Packet.dest_port = BOOT_RUP; - CmdBlkP->Packet.src_unit = 0; - CmdBlkP->Packet.src_port = BOOT_RUP; - CmdBlkP->Packet.len = 0x84; - CmdBlkP->Packet.data[0] = IWAIT; - CmdBlkP->Packet.data[1] = Link; - CmdBlkP->Packet.data[2] = IWAIT_MAGIC & 0xFF; - CmdBlkP->Packet.data[3] = (IWAIT_MAGIC >> 8) & 0xFF; - - if (RIOQueueCmdBlk(HostP, ID - 1, CmdBlkP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: Failed to queue iwait command\n"); - return -EIO; - } - return 0; -} - -int RIOFoadWakeup(struct rio_info *p) -{ - int port; - struct Port *PortP; - unsigned long flags; - - for (port = 0; port < RIO_PORTS; port++) { - PortP = p->RIOPortp[port]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->Config = 0; - PortP->State = 0; - PortP->InUse = NOT_INUSE; - PortP->PortState = 0; - PortP->FlushCmdBodge = 0; - PortP->ModemLines = 0; - PortP->ModemState = 0; - PortP->CookMode = 0; - PortP->ParamSem = 0; - PortP->Mapped = 0; - PortP->WflushFlag = 0; - PortP->MagicFlags = 0; - PortP->RxDataStart = 0; - PortP->TxBufferIn = 0; - PortP->TxBufferOut = 0; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - return (0); -} - -/* -** Incoming command on the COMMAND_RUP to be processed. -*/ -static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struct PKT __iomem *PacketP) -{ - struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *)PacketP->data; - struct Port *PortP; - struct UnixRup *UnixRupP; - unsigned short SysPort; - unsigned short ReportedModemStatus; - unsigned short rup; - unsigned short subCommand; - unsigned long flags; - - func_enter(); - - /* - ** 16 port RTA note: - ** Command rup packets coming from the RTA will have pkt->data[1] (which - ** translates to PktCmdP->PhbNum) set to the host port number for the - ** particular unit. To access the correct BaseSysPort for a 16 port RTA, - ** we can use PhbNum to get the rup number for the appropriate 8 port - ** block (for the first block, this should be equal to 'Rup'). - */ - rup = readb(&PktCmdP->PhbNum) / (unsigned short) PORTS_PER_RTA; - UnixRupP = &HostP->UnixRups[rup]; - SysPort = UnixRupP->BaseSysPort + (readb(&PktCmdP->PhbNum) % (unsigned short) PORTS_PER_RTA); - rio_dprintk(RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort); - - if (UnixRupP->BaseSysPort == NO_PORT) { - rio_dprintk(RIO_DEBUG_CMD, "OBSCURE ERROR!\n"); - rio_dprintk(RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n"); - rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Host number %Zd, name ``%s''\n", HostP - p->RIOHosts, HostP->Name); - rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Rup number 0x%x\n", rup); - - if (Rup < (unsigned short) MAX_RUP) { - rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for RTA ``%s''\n", HostP->Mapping[Rup].Name); - } else - rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for link ``%c'' of host ``%s''\n", ('A' + Rup - MAX_RUP), HostP->Name); - - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Destination 0x%x:0x%x\n", readb(&PacketP->dest_unit), readb(&PacketP->dest_port)); - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Source 0x%x:0x%x\n", readb(&PacketP->src_unit), readb(&PacketP->src_port)); - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Length 0x%x (%d)\n", readb(&PacketP->len), readb(&PacketP->len)); - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Control 0x%x (%d)\n", readb(&PacketP->control), readb(&PacketP->control)); - rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Check 0x%x (%d)\n", readw(&PacketP->csum), readw(&PacketP->csum)); - rio_dprintk(RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, " "Command Code 0x%x\n", readb(&PktCmdP->PhbNum), readb(&PktCmdP->Command)); - return 1; - } - PortP = p->RIOPortp[SysPort]; - rio_spin_lock_irqsave(&PortP->portSem, flags); - switch (readb(&PktCmdP->Command)) { - case RIOC_BREAK_RECEIVED: - rio_dprintk(RIO_DEBUG_CMD, "Received a break!\n"); - /* If the current line disc. is not multi-threading and - the current processor is not the default, reset rup_intr - and return 0 to ensure that the command packet is - not freed. */ - /* Call tmgr HANGUP HERE */ - /* Fix this later when every thing works !!!! RAMRAJ */ - gs_got_break(&PortP->gs); - break; - - case RIOC_COMPLETE: - rio_dprintk(RIO_DEBUG_CMD, "Command complete on phb %d host %Zd\n", readb(&PktCmdP->PhbNum), HostP - p->RIOHosts); - subCommand = 1; - switch (readb(&PktCmdP->SubCommand)) { - case RIOC_MEMDUMP: - rio_dprintk(RIO_DEBUG_CMD, "Memory dump cmd (0x%x) from addr 0x%x\n", readb(&PktCmdP->SubCommand), readw(&PktCmdP->SubAddr)); - break; - case RIOC_READ_REGISTER: - rio_dprintk(RIO_DEBUG_CMD, "Read register (0x%x)\n", readw(&PktCmdP->SubAddr)); - p->CdRegister = (readb(&PktCmdP->ModemStatus) & RIOC_MSVR1_HOST); - break; - default: - subCommand = 0; - break; - } - if (subCommand) - break; - rio_dprintk(RIO_DEBUG_CMD, "New status is 0x%x was 0x%x\n", readb(&PktCmdP->PortStatus), PortP->PortState); - if (PortP->PortState != readb(&PktCmdP->PortStatus)) { - rio_dprintk(RIO_DEBUG_CMD, "Mark status & wakeup\n"); - PortP->PortState = readb(&PktCmdP->PortStatus); - /* What should we do here ... - wakeup( &PortP->PortState ); - */ - } else - rio_dprintk(RIO_DEBUG_CMD, "No change\n"); - - /* FALLTHROUGH */ - case RIOC_MODEM_STATUS: - /* - ** Knock out the tbusy and tstop bits, as these are not relevant - ** to the check for modem status change (they're just there because - ** it's a convenient place to put them!). - */ - ReportedModemStatus = readb(&PktCmdP->ModemStatus); - if ((PortP->ModemState & RIOC_MSVR1_HOST) == - (ReportedModemStatus & RIOC_MSVR1_HOST)) { - rio_dprintk(RIO_DEBUG_CMD, "Modem status unchanged 0x%x\n", PortP->ModemState); - /* - ** Update ModemState just in case tbusy or tstop states have - ** changed. - */ - PortP->ModemState = ReportedModemStatus; - } else { - rio_dprintk(RIO_DEBUG_CMD, "Modem status change from 0x%x to 0x%x\n", PortP->ModemState, ReportedModemStatus); - PortP->ModemState = ReportedModemStatus; -#ifdef MODEM_SUPPORT - if (PortP->Mapped) { - /***********************************************************\ - ************************************************************* - *** *** - *** M O D E M S T A T E C H A N G E *** - *** *** - ************************************************************* - \***********************************************************/ - /* - ** If the device is a modem, then check the modem - ** carrier. - */ - if (PortP->gs.port.tty == NULL) - break; - if (PortP->gs.port.tty->termios == NULL) - break; - - if (!(PortP->gs.port.tty->termios->c_cflag & CLOCAL) && ((PortP->State & (RIO_MOPEN | RIO_WOPEN)))) { - - rio_dprintk(RIO_DEBUG_CMD, "Is there a Carrier?\n"); - /* - ** Is there a carrier? - */ - if (PortP->ModemState & RIOC_MSVR1_CD) { - /* - ** Has carrier just appeared? - */ - if (!(PortP->State & RIO_CARR_ON)) { - rio_dprintk(RIO_DEBUG_CMD, "Carrier just came up.\n"); - PortP->State |= RIO_CARR_ON; - /* - ** wakeup anyone in WOPEN - */ - if (PortP->State & (PORT_ISOPEN | RIO_WOPEN)) - wake_up_interruptible(&PortP->gs.port.open_wait); - } - } else { - /* - ** Has carrier just dropped? - */ - if (PortP->State & RIO_CARR_ON) { - if (PortP->State & (PORT_ISOPEN | RIO_WOPEN | RIO_MOPEN)) - tty_hangup(PortP->gs.port.tty); - PortP->State &= ~RIO_CARR_ON; - rio_dprintk(RIO_DEBUG_CMD, "Carrirer just went down\n"); - } - } - } - } -#endif - } - break; - - default: - rio_dprintk(RIO_DEBUG_CMD, "Unknown command %d on CMD_RUP of host %Zd\n", readb(&PktCmdP->Command), HostP - p->RIOHosts); - break; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - func_exit(); - - return 1; -} - -/* -** The command mechanism: -** Each rup has a chain of commands associated with it. -** This chain is maintained by routines in this file. -** Periodically we are called and we run a quick check of all the -** active chains to determine if there is a command to be executed, -** and if the rup is ready to accept it. -** -*/ - -/* -** Allocate an empty command block. -*/ -struct CmdBlk *RIOGetCmdBlk(void) -{ - struct CmdBlk *CmdBlkP; - - CmdBlkP = kzalloc(sizeof(struct CmdBlk), GFP_ATOMIC); - return CmdBlkP; -} - -/* -** Return a block to the head of the free list. -*/ -void RIOFreeCmdBlk(struct CmdBlk *CmdBlkP) -{ - kfree(CmdBlkP); -} - -/* -** attach a command block to the list of commands to be performed for -** a given rup. -*/ -int RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP) -{ - struct CmdBlk **Base; - struct UnixRup *UnixRupP; - unsigned long flags; - - if (Rup >= (unsigned short) (MAX_RUP + LINKS_PER_UNIT)) { - rio_dprintk(RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n", Rup); - RIOFreeCmdBlk(CmdBlkP); - return RIO_FAIL; - } - - UnixRupP = &HostP->UnixRups[Rup]; - - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - - /* - ** If the RUP is currently inactive, then put the request - ** straight on the RUP.... - */ - if ((UnixRupP->CmdsWaitingP == NULL) && (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE) && (CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) - : 1)) { - rio_dprintk(RIO_DEBUG_CMD, "RUP inactive-placing command straight on. Cmd byte is 0x%x\n", CmdBlkP->Packet.data[0]); - - /* - ** Whammy! blat that pack! - */ - HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT)); - - /* - ** place command packet on the pending position. - */ - UnixRupP->CmdPendingP = CmdBlkP; - - /* - ** set the command register - */ - writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol); - - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - - return 0; - } - rio_dprintk(RIO_DEBUG_CMD, "RUP active - en-queing\n"); - - if (UnixRupP->CmdsWaitingP != NULL) - rio_dprintk(RIO_DEBUG_CMD, "Rup active - command waiting\n"); - if (UnixRupP->CmdPendingP != NULL) - rio_dprintk(RIO_DEBUG_CMD, "Rup active - command pending\n"); - if (readw(&UnixRupP->RupP->txcontrol) != TX_RUP_INACTIVE) - rio_dprintk(RIO_DEBUG_CMD, "Rup active - command rup not ready\n"); - - Base = &UnixRupP->CmdsWaitingP; - - rio_dprintk(RIO_DEBUG_CMD, "First try to queue cmdblk %p at %p\n", CmdBlkP, Base); - - while (*Base) { - rio_dprintk(RIO_DEBUG_CMD, "Command cmdblk %p here\n", *Base); - Base = &((*Base)->NextP); - rio_dprintk(RIO_DEBUG_CMD, "Now try to queue cmd cmdblk %p at %p\n", CmdBlkP, Base); - } - - rio_dprintk(RIO_DEBUG_CMD, "Will queue cmdblk %p at %p\n", CmdBlkP, Base); - - *Base = CmdBlkP; - - CmdBlkP->NextP = NULL; - - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - - return 0; -} - -/* -** Here we go - if there is an empty rup, fill it! -** must be called at splrio() or higher. -*/ -void RIOPollHostCommands(struct rio_info *p, struct Host *HostP) -{ - struct CmdBlk *CmdBlkP; - struct UnixRup *UnixRupP; - struct PKT __iomem *PacketP; - unsigned short Rup; - unsigned long flags; - - - Rup = MAX_RUP + LINKS_PER_UNIT; - - do { /* do this loop for each RUP */ - /* - ** locate the rup we are processing & lock it - */ - UnixRupP = &HostP->UnixRups[--Rup]; - - spin_lock_irqsave(&UnixRupP->RupLock, flags); - - /* - ** First check for incoming commands: - */ - if (readw(&UnixRupP->RupP->rxcontrol) != RX_RUP_INACTIVE) { - int FreeMe; - - PacketP = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->rxpkt)); - - switch (readb(&PacketP->dest_port)) { - case BOOT_RUP: - rio_dprintk(RIO_DEBUG_CMD, "Incoming Boot %s packet '%x'\n", readb(&PacketP->len) & 0x80 ? "Command" : "Data", readb(&PacketP->data[0])); - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - FreeMe = RIOBootRup(p, Rup, HostP, PacketP); - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - break; - - case COMMAND_RUP: - /* - ** Free the RUP lock as loss of carrier causes a - ** ttyflush which will (eventually) call another - ** routine that uses the RUP lock. - */ - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - FreeMe = RIOCommandRup(p, Rup, HostP, PacketP); - if (readb(&PacketP->data[5]) == RIOC_MEMDUMP) { - rio_dprintk(RIO_DEBUG_CMD, "Memdump from 0x%x complete\n", readw(&(PacketP->data[6]))); - rio_memcpy_fromio(p->RIOMemDump, &(PacketP->data[8]), 32); - } - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - break; - - case ROUTE_RUP: - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - FreeMe = RIORouteRup(p, Rup, HostP, PacketP); - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - break; - - default: - rio_dprintk(RIO_DEBUG_CMD, "Unknown RUP %d\n", readb(&PacketP->dest_port)); - FreeMe = 1; - break; - } - - if (FreeMe) { - rio_dprintk(RIO_DEBUG_CMD, "Free processed incoming command packet\n"); - put_free_end(HostP, PacketP); - - writew(RX_RUP_INACTIVE, &UnixRupP->RupP->rxcontrol); - - if (readw(&UnixRupP->RupP->handshake) == PHB_HANDSHAKE_SET) { - rio_dprintk(RIO_DEBUG_CMD, "Handshake rup %d\n", Rup); - writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &UnixRupP->RupP->handshake); - } - } - } - - /* - ** IF a command was running on the port, - ** and it has completed, then tidy it up. - */ - if ((CmdBlkP = UnixRupP->CmdPendingP) && /* ASSIGN! */ - (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) { - /* - ** we are idle. - ** there is a command in pending. - ** Therefore, this command has finished. - ** So, wakeup whoever is waiting for it (and tell them - ** what happened). - */ - if (CmdBlkP->Packet.dest_port == BOOT_RUP) - rio_dprintk(RIO_DEBUG_CMD, "Free Boot %s Command Block '%x'\n", CmdBlkP->Packet.len & 0x80 ? "Command" : "Data", CmdBlkP->Packet.data[0]); - - rio_dprintk(RIO_DEBUG_CMD, "Command %p completed\n", CmdBlkP); - - /* - ** Clear the Rup lock to prevent mutual exclusion. - */ - if (CmdBlkP->PostFuncP) { - rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - (*CmdBlkP->PostFuncP) (CmdBlkP->PostArg, CmdBlkP); - rio_spin_lock_irqsave(&UnixRupP->RupLock, flags); - } - - /* - ** ....clear the pending flag.... - */ - UnixRupP->CmdPendingP = NULL; - - /* - ** ....and return the command block to the freelist. - */ - RIOFreeCmdBlk(CmdBlkP); - } - - /* - ** If there is a command for this rup, and the rup - ** is idle, then process the command - */ - if ((CmdBlkP = UnixRupP->CmdsWaitingP) && /* ASSIGN! */ - (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) { - /* - ** if the pre-function is non-zero, call it. - ** If it returns RIO_FAIL then don't - ** send this command yet! - */ - if (!(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) : 1)) { - rio_dprintk(RIO_DEBUG_CMD, "Not ready to start command %p\n", CmdBlkP); - } else { - rio_dprintk(RIO_DEBUG_CMD, "Start new command %p Cmd byte is 0x%x\n", CmdBlkP, CmdBlkP->Packet.data[0]); - /* - ** Whammy! blat that pack! - */ - HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT)); - - /* - ** remove the command from the rup command queue... - */ - UnixRupP->CmdsWaitingP = CmdBlkP->NextP; - - /* - ** ...and place it on the pending position. - */ - UnixRupP->CmdPendingP = CmdBlkP; - - /* - ** set the command register - */ - writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol); - - /* - ** the command block will be freed - ** when the command has been processed. - */ - } - } - spin_unlock_irqrestore(&UnixRupP->RupLock, flags); - } while (Rup); -} - -int RIOWFlushMark(unsigned long iPortP, struct CmdBlk *CmdBlkP) -{ - struct Port *PortP = (struct Port *) iPortP; - unsigned long flags; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->WflushFlag++; - PortP->MagicFlags |= MAGIC_FLUSH; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return RIOUnUse(iPortP, CmdBlkP); -} - -int RIORFlushEnable(unsigned long iPortP, struct CmdBlk *CmdBlkP) -{ - struct Port *PortP = (struct Port *) iPortP; - struct PKT __iomem *PacketP; - unsigned long flags; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - while (can_remove_receive(&PacketP, PortP)) { - remove_receive(PortP); - put_free_end(PortP->HostP, PacketP); - } - - if (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET) { - /* - ** MAGIC! (Basically, handshake the RX buffer, so that - ** the RTAs upstream can be re-enabled.) - */ - rio_dprintk(RIO_DEBUG_CMD, "Util: Set RX handshake bit\n"); - writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake); - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return RIOUnUse(iPortP, CmdBlkP); -} - -int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP) -{ - struct Port *PortP = (struct Port *) iPortP; - unsigned long flags; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - rio_dprintk(RIO_DEBUG_CMD, "Decrement in use count for port\n"); - - if (PortP->InUse) { - if (--PortP->InUse != NOT_INUSE) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - } - } - /* - ** While PortP->InUse is set (i.e. a preemptive command has been sent to - ** the RTA and is awaiting completion), any transmit data is prevented from - ** being transferred from the write queue into the transmit packets - ** (add_transmit) and no furthur transmit interrupt will be sent for that - ** data. The next interrupt will occur up to 500ms later (RIOIntr is called - ** twice a second as a saftey measure). This was the case when kermit was - ** used to send data into a RIO port. After each packet was sent, TCFLSH - ** was called to flush the read queue preemptively. PortP->InUse was - ** incremented, thereby blocking the 6 byte acknowledgement packet - ** transmitted back. This acknowledgment hung around for 500ms before - ** being sent, thus reducing input performance substantially!. - ** When PortP->InUse becomes NOT_INUSE, we must ensure that any data - ** hanging around in the transmit buffer is sent immediately. - */ - writew(1, &PortP->HostP->ParmMapP->tx_intr); - /* What to do here .. - wakeup( (caddr_t)&(PortP->InUse) ); - */ - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; -} - -/* -** -** How to use this file: -** -** To send a command down a rup, you need to allocate a command block, fill -** in the packet information, fill in the command number, fill in the pre- -** and post- functions and arguments, and then add the command block to the -** queue of command blocks for the port in question. When the port is idle, -** then the pre-function will be called. If this returns RIO_FAIL then the -** command will be re-queued and tried again at a later date (probably in one -** clock tick). If the pre-function returns NOT RIO_FAIL, then the command -** packet will be queued on the RUP, and the txcontrol field set to the -** command number. When the txcontrol field has changed from being the -** command number, then the post-function will be called, with the argument -** specified earlier, a pointer to the command block, and the value of -** txcontrol. -** -** To allocate a command block, call RIOGetCmdBlk(). This returns a pointer -** to the command block structure allocated, or NULL if there aren't any. -** The block will have been zeroed for you. -** -** The structure has the following fields: -** -** struct CmdBlk -** { -** struct CmdBlk *NextP; ** Pointer to next command block ** -** struct PKT Packet; ** A packet, to copy to the rup ** -** int (*PreFuncP)(); ** The func to call to check if OK ** -** int PreArg; ** The arg for the func ** -** int (*PostFuncP)(); ** The func to call when completed ** -** int PostArg; ** The arg for the func ** -** }; -** -** You need to fill in ALL fields EXCEPT NextP, which is used to link the -** blocks together either on the free list or on the Rup list. -** -** Packet is an actual packet structure to be filled in with the packet -** information associated with the command. You need to fill in everything, -** as the command processor doesn't process the command packet in any way. -** -** The PreFuncP is called before the packet is enqueued on the host rup. -** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must -** return !RIO_FAIL to have the packet queued on the rup, and RIO_FAIL -** if the packet is NOT to be queued. -** -** The PostFuncP is called when the command has completed. It is called -** as (*PostFuncP)(PostArg, CmdBlkP, txcontrol);. PostFuncP is not expected -** to return a value. PostFuncP does NOT need to free the command block, -** as this happens automatically after PostFuncP returns. -** -** Once the command block has been filled in, it is attached to the correct -** queue by calling RIOQueueCmdBlk( HostP, Rup, CmdBlkP ) where HostP is -** a pointer to the struct Host, Rup is the NUMBER of the rup (NOT a pointer -** to it!), and CmdBlkP is the pointer to the command block allocated using -** RIOGetCmdBlk(). -** -*/ diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c deleted file mode 100644 index 7805063..0000000 --- a/drivers/char/rio/rioctrl.c +++ /dev/null @@ -1,1504 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioctrl.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:42 -** Retrieved : 11/6/98 10:33:49 -** -** ident @(#)rioctrl.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - -#include <linux/termios.h> -#include <linux/serial.h> - -#include <linux/generic_serial.h> - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" - - -static struct LpbReq LpbReq; -static struct RupReq RupReq; -static struct PortReq PortReq; -static struct HostReq HostReq; /* oh really? global? and no locking? */ -static struct HostDpRam HostDpRam; -static struct DebugCtrl DebugCtrl; -static struct Map MapEnt; -static struct PortSetup PortSetup; -static struct DownLoad DownLoad; -static struct SendPack SendPack; -/* static struct StreamInfo StreamInfo; */ -/* static char modemtable[RIO_PORTS]; */ -static struct SpecialRupCmd SpecialRupCmd; -static struct PortParams PortParams; -static struct portStats portStats; - -static struct SubCmdStruct { - ushort Host; - ushort Rup; - ushort Port; - ushort Addr; -} SubCmd; - -struct PortTty { - uint port; - struct ttystatics Tty; -}; - -static struct PortTty PortTty; -typedef struct ttystatics TERMIO; - -/* -** This table is used when the config.rio downloads bin code to the -** driver. We index the table using the product code, 0-F, and call -** the function pointed to by the entry, passing the information -** about the boot. -** The RIOBootCodeUNKNOWN entry is there to politely tell the calling -** process to bog off. -*/ -static int - (*RIOBootTable[MAX_PRODUCT]) (struct rio_info *, struct DownLoad *) = { - /* 0 */ RIOBootCodeHOST, - /* Host Card */ - /* 1 */ RIOBootCodeRTA, - /* RTA */ -}; - -#define drv_makedev(maj, min) ((((uint) maj & 0xff) << 8) | ((uint) min & 0xff)) - -static int copy_from_io(void __user *to, void __iomem *from, size_t size) -{ - void *buf = kmalloc(size, GFP_KERNEL); - int res = -ENOMEM; - if (buf) { - rio_memcpy_fromio(buf, from, size); - res = copy_to_user(to, buf, size); - kfree(buf); - } - return res; -} - -int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su) -{ - uint Host; /* leave me unsigned! */ - uint port; /* and me! */ - struct Host *HostP; - ushort loop; - int Entry; - struct Port *PortP; - struct PKT __iomem *PacketP; - int retval = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; - - func_enter(); - - /* Confuse the compiler to think that we've initialized these */ - Host = 0; - PortP = NULL; - - rio_dprintk(RIO_DEBUG_CTRL, "control ioctl cmd: 0x%x arg: %p\n", cmd, argp); - - switch (cmd) { - /* - ** RIO_SET_TIMER - ** - ** Change the value of the host card interrupt timer. - ** If the host card number is -1 then all host cards are changed - ** otherwise just the specified host card will be changed. - */ - case RIO_SET_TIMER: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_TIMER to %ldms\n", arg); - { - int host, value; - host = (arg >> 16) & 0x0000FFFF; - value = arg & 0x0000ffff; - if (host == -1) { - for (host = 0; host < p->RIONumHosts; host++) { - if (p->RIOHosts[host].Flags == RC_RUNNING) { - writew(value, &p->RIOHosts[host].ParmMapP->timer); - } - } - } else if (host >= p->RIONumHosts) { - return -EINVAL; - } else { - if (p->RIOHosts[host].Flags == RC_RUNNING) { - writew(value, &p->RIOHosts[host].ParmMapP->timer); - } - } - } - return 0; - - case RIO_FOAD_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_FOAD_RTA\n"); - return RIOCommandRta(p, arg, RIOFoadRta); - - case RIO_ZOMBIE_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_ZOMBIE_RTA\n"); - return RIOCommandRta(p, arg, RIOZombieRta); - - case RIO_IDENTIFY_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_IDENTIFY_RTA\n"); - return RIOIdentifyRta(p, argp); - - case RIO_KILL_NEIGHBOUR: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_KILL_NEIGHBOUR\n"); - return RIOKillNeighbour(p, argp); - - case SPECIAL_RUP_CMD: - { - struct CmdBlk *CmdBlkP; - - rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD\n"); - if (copy_from_user(&SpecialRupCmd, argp, sizeof(SpecialRupCmd))) { - rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - CmdBlkP = RIOGetCmdBlk(); - if (!CmdBlkP) { - rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD GetCmdBlk failed\n"); - return -ENXIO; - } - CmdBlkP->Packet = SpecialRupCmd.Packet; - if (SpecialRupCmd.Host >= p->RIONumHosts) - SpecialRupCmd.Host = 0; - rio_dprintk(RIO_DEBUG_CTRL, "Queue special rup command for host %d rup %d\n", SpecialRupCmd.Host, SpecialRupCmd.RupNum); - if (RIOQueueCmdBlk(&p->RIOHosts[SpecialRupCmd.Host], SpecialRupCmd.RupNum, CmdBlkP) == RIO_FAIL) { - printk(KERN_WARNING "rio: FAILED TO QUEUE SPECIAL RUP COMMAND\n"); - } - return 0; - } - - case RIO_DEBUG_MEM: - return -EPERM; - - case RIO_ALL_MODEM: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_ALL_MODEM\n"); - p->RIOError.Error = IOCTL_COMMAND_UNKNOWN; - return -EINVAL; - - case RIO_GET_TABLE: - /* - ** Read the routing table from the device driver to user space - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_TABLE\n"); - - if ((retval = RIOApel(p)) != 0) - return retval; - - if (copy_to_user(argp, p->RIOConnectTable, TOTAL_MAP_ENTRIES * sizeof(struct Map))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_TABLE copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - - { - int entry; - rio_dprintk(RIO_DEBUG_CTRL, "*****\nMAP ENTRIES\n"); - for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { - if ((p->RIOConnectTable[entry].ID == 0) && (p->RIOConnectTable[entry].HostUniqueNum == 0) && (p->RIOConnectTable[entry].RtaUniqueNum == 0)) - continue; - - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.HostUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].HostUniqueNum); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.RtaUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].RtaUniqueNum); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.ID = 0x%x\n", entry, p->RIOConnectTable[entry].ID); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.ID2 = 0x%x\n", entry, p->RIOConnectTable[entry].ID2); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Flags = 0x%x\n", entry, (int) p->RIOConnectTable[entry].Flags); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.SysPort = 0x%x\n", entry, (int) p->RIOConnectTable[entry].SysPort); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[0].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[0].Unit); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[0].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[0].Link); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[1].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[1].Unit); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[1].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[1].Link); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[2].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[2].Unit); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[2].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[2].Link); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[3].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[3].Unit); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[4].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[3].Link); - rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Name = %s\n", entry, p->RIOConnectTable[entry].Name); - } - rio_dprintk(RIO_DEBUG_CTRL, "*****\nEND MAP ENTRIES\n"); - } - p->RIOQuickCheck = NOT_CHANGED; /* a table has been gotten */ - return 0; - - case RIO_PUT_TABLE: - /* - ** Write the routing table to the device driver from user space - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE\n"); - - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&p->RIOConnectTable[0], argp, TOTAL_MAP_ENTRIES * sizeof(struct Map))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } -/* -*********************************** - { - int entry; - rio_dprint(RIO_DEBUG_CTRL, ("*****\nMAP ENTRIES\n") ); - for ( entry=0; entry<TOTAL_MAP_ENTRIES; entry++ ) - { - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.HostUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].HostUniqueNum ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.RtaUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].RtaUniqueNum ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.ID = 0x%x\n", entry, p->RIOConnectTable[entry].ID ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.ID2 = 0x%x\n", entry, p->RIOConnectTable[entry].ID2 ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Flags = 0x%x\n", entry, p->RIOConnectTable[entry].Flags ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.SysPort = 0x%x\n", entry, p->RIOConnectTable[entry].SysPort ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[0].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[0].Unit ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[0].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[0].Link ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[1].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[1].Unit ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[1].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[1].Link ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[2].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[2].Unit ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[2].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[2].Link ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[3].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[3].Unit ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[4].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[3].Link ) ); - rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Name = %s\n", entry, p->RIOConnectTable[entry].Name ) ); - } - rio_dprint(RIO_DEBUG_CTRL, ("*****\nEND MAP ENTRIES\n") ); - } -*********************************** -*/ - return RIONewTable(p); - - case RIO_GET_BINDINGS: - /* - ** Send bindings table, containing unique numbers of RTAs owned - ** by this system to user space - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS\n"); - - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_to_user(argp, p->RIOBindTab, (sizeof(ulong) * MAX_RTA_BINDINGS))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_PUT_BINDINGS: - /* - ** Receive a bindings table, containing unique numbers of RTAs owned - ** by this system - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS\n"); - - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&p->RIOBindTab[0], argp, (sizeof(ulong) * MAX_RTA_BINDINGS))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS copy failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - return 0; - - case RIO_BIND_RTA: - { - int EmptySlot = -1; - /* - ** Bind this RTA to host, so that it will be booted by - ** host in 'boot owned RTAs' mode. - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_BIND_RTA\n"); - - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_BIND_RTA !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - for (Entry = 0; Entry < MAX_RTA_BINDINGS; Entry++) { - if ((EmptySlot == -1) && (p->RIOBindTab[Entry] == 0L)) - EmptySlot = Entry; - else if (p->RIOBindTab[Entry] == arg) { - /* - ** Already exists - delete - */ - p->RIOBindTab[Entry] = 0L; - rio_dprintk(RIO_DEBUG_CTRL, "Removing Rta %ld from p->RIOBindTab\n", arg); - return 0; - } - } - /* - ** Dosen't exist - add - */ - if (EmptySlot != -1) { - p->RIOBindTab[EmptySlot] = arg; - rio_dprintk(RIO_DEBUG_CTRL, "Adding Rta %lx to p->RIOBindTab\n", arg); - } else { - rio_dprintk(RIO_DEBUG_CTRL, "p->RIOBindTab full! - Rta %lx not added\n", arg); - return -ENOMEM; - } - return 0; - } - - case RIO_RESUME: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME\n"); - port = arg; - if ((port < 0) || (port > 511)) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Bad port number %d\n", port); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - PortP = p->RIOPortp[port]; - if (!PortP->Mapped) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d not mapped\n", port); - p->RIOError.Error = PORT_NOT_MAPPED_INTO_SYSTEM; - return -EINVAL; - } - if (!(PortP->State & (RIO_LOPEN | RIO_MOPEN))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d not open\n", port); - return -EINVAL; - } - - rio_spin_lock_irqsave(&PortP->portSem, flags); - if (RIOPreemptiveCmd(p, (p->RIOPortp[port]), RIOC_RESUME) == - RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME failed\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EBUSY; - } else { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d resumed\n", port); - PortP->State |= RIO_BUSY; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_ASSIGN_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_ASSIGN_RTA\n"); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_ASSIGN_RTA !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { - rio_dprintk(RIO_DEBUG_CTRL, "Copy from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - return RIOAssignRta(p, &MapEnt); - - case RIO_CHANGE_NAME: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_CHANGE_NAME\n"); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_CHANGE_NAME !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { - rio_dprintk(RIO_DEBUG_CTRL, "Copy from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - return RIOChangeName(p, &MapEnt); - - case RIO_DELETE_RTA: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DELETE_RTA\n"); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DELETE_RTA !Root\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) { - rio_dprintk(RIO_DEBUG_CTRL, "Copy from data space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - return RIODeleteRta(p, &MapEnt); - - case RIO_QUICK_CHECK: - if (copy_to_user(argp, &p->RIORtaDisCons, sizeof(unsigned int))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_LAST_ERROR: - if (copy_to_user(argp, &p->RIOError, sizeof(struct Error))) - return -EFAULT; - return 0; - - case RIO_GET_LOG: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_LOG\n"); - return -EINVAL; - - case RIO_GET_MODTYPE: - if (copy_from_user(&port, argp, sizeof(unsigned int))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "Get module type for port %d\n", port); - if (port < 0 || port > 511) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_MODTYPE: Bad port number %d\n", port); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - PortP = (p->RIOPortp[port]); - if (!PortP->Mapped) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_MODTYPE: Port %d not mapped\n", port); - p->RIOError.Error = PORT_NOT_MAPPED_INTO_SYSTEM; - return -EINVAL; - } - /* - ** Return module type of port - */ - port = PortP->HostP->UnixRups[PortP->RupNum].ModTypes; - if (copy_to_user(argp, &port, sizeof(unsigned int))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return (0); - case RIO_BLOCK_OPENS: - rio_dprintk(RIO_DEBUG_CTRL, "Opens block until booted\n"); - for (Entry = 0; Entry < RIO_PORTS; Entry++) { - rio_spin_lock_irqsave(&PortP->portSem, flags); - p->RIOPortp[Entry]->WaitUntilBooted = 1; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - return 0; - - case RIO_SETUP_PORTS: - rio_dprintk(RIO_DEBUG_CTRL, "Setup ports\n"); - if (copy_from_user(&PortSetup, argp, sizeof(PortSetup))) { - p->RIOError.Error = COPYIN_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "EFAULT"); - return -EFAULT; - } - if (PortSetup.From > PortSetup.To || PortSetup.To >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - rio_dprintk(RIO_DEBUG_CTRL, "ENXIO"); - return -ENXIO; - } - if (PortSetup.XpCps > p->RIOConf.MaxXpCps || PortSetup.XpCps < p->RIOConf.MinXpCps) { - p->RIOError.Error = XPRINT_CPS_OUT_OF_RANGE; - rio_dprintk(RIO_DEBUG_CTRL, "EINVAL"); - return -EINVAL; - } - if (!p->RIOPortp) { - printk(KERN_ERR "rio: No p->RIOPortp array!\n"); - rio_dprintk(RIO_DEBUG_CTRL, "No p->RIOPortp array!\n"); - return -EIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "entering loop (%d %d)!\n", PortSetup.From, PortSetup.To); - for (loop = PortSetup.From; loop <= PortSetup.To; loop++) { - rio_dprintk(RIO_DEBUG_CTRL, "in loop (%d)!\n", loop); - } - rio_dprintk(RIO_DEBUG_CTRL, "after loop (%d)!\n", loop); - rio_dprintk(RIO_DEBUG_CTRL, "Retval:%x\n", retval); - return retval; - - case RIO_GET_PORT_SETUP: - rio_dprintk(RIO_DEBUG_CTRL, "Get port setup\n"); - if (copy_from_user(&PortSetup, argp, sizeof(PortSetup))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (PortSetup.From >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - - port = PortSetup.To = PortSetup.From; - PortSetup.IxAny = (p->RIOPortp[port]->Config & RIO_IXANY) ? 1 : 0; - PortSetup.IxOn = (p->RIOPortp[port]->Config & RIO_IXON) ? 1 : 0; - PortSetup.Drain = (p->RIOPortp[port]->Config & RIO_WAITDRAIN) ? 1 : 0; - PortSetup.Store = p->RIOPortp[port]->Store; - PortSetup.Lock = p->RIOPortp[port]->Lock; - PortSetup.XpCps = p->RIOPortp[port]->Xprint.XpCps; - memcpy(PortSetup.XpOn, p->RIOPortp[port]->Xprint.XpOn, MAX_XP_CTRL_LEN); - memcpy(PortSetup.XpOff, p->RIOPortp[port]->Xprint.XpOff, MAX_XP_CTRL_LEN); - PortSetup.XpOn[MAX_XP_CTRL_LEN - 1] = '\0'; - PortSetup.XpOff[MAX_XP_CTRL_LEN - 1] = '\0'; - - if (copy_to_user(argp, &PortSetup, sizeof(PortSetup))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_GET_PORT_PARAMS: - rio_dprintk(RIO_DEBUG_CTRL, "Get port params\n"); - if (copy_from_user(&PortParams, argp, sizeof(struct PortParams))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (PortParams.Port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[PortParams.Port]); - PortParams.Config = PortP->Config; - PortParams.State = PortP->State; - rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortParams.Port); - - if (copy_to_user(argp, &PortParams, sizeof(struct PortParams))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_GET_PORT_TTY: - rio_dprintk(RIO_DEBUG_CTRL, "Get port tty\n"); - if (copy_from_user(&PortTty, argp, sizeof(struct PortTty))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (PortTty.port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - - rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortTty.port); - PortP = (p->RIOPortp[PortTty.port]); - if (copy_to_user(argp, &PortTty, sizeof(struct PortTty))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_SET_PORT_TTY: - if (copy_from_user(&PortTty, argp, sizeof(struct PortTty))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "Set port %d tty\n", PortTty.port); - if (PortTty.port >= (ushort) RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[PortTty.port]); - RIOParam(PortP, RIOC_CONFIG, PortP->State & RIO_MODEM, - OK_TO_SLEEP); - return retval; - - case RIO_SET_PORT_PARAMS: - rio_dprintk(RIO_DEBUG_CTRL, "Set port params\n"); - if (copy_from_user(&PortParams, argp, sizeof(PortParams))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (PortParams.Port >= (ushort) RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[PortParams.Port]); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->Config = PortParams.Config; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_GET_PORT_STATS: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_PORT_STATS\n"); - if (copy_from_user(&portStats, argp, sizeof(struct portStats))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (portStats.port < 0 || portStats.port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[portStats.port]); - portStats.gather = PortP->statsGather; - portStats.txchars = PortP->txchars; - portStats.rxchars = PortP->rxchars; - portStats.opens = PortP->opens; - portStats.closes = PortP->closes; - portStats.ioctls = PortP->ioctls; - if (copy_to_user(argp, &portStats, sizeof(struct portStats))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_RESET_PORT_STATS: - port = arg; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESET_PORT_STATS\n"); - if (port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[port]); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->txchars = 0; - PortP->rxchars = 0; - PortP->opens = 0; - PortP->closes = 0; - PortP->ioctls = 0; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_GATHER_PORT_STATS: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GATHER_PORT_STATS\n"); - if (copy_from_user(&portStats, argp, sizeof(struct portStats))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (portStats.port < 0 || portStats.port >= RIO_PORTS) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - PortP = (p->RIOPortp[portStats.port]); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->statsGather = portStats.gather; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_READ_CONFIG: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_CONFIG\n"); - if (copy_to_user(argp, &p->RIOConf, sizeof(struct Conf))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_SET_CONFIG: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_CONFIG\n"); - if (!su) { - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&p->RIOConf, argp, sizeof(struct Conf))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - /* - ** move a few value around - */ - for (Host = 0; Host < p->RIONumHosts; Host++) - if ((p->RIOHosts[Host].Flags & RUN_STATE) == RC_RUNNING) - writew(p->RIOConf.Timer, &p->RIOHosts[Host].ParmMapP->timer); - return retval; - - case RIO_START_POLLER: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_START_POLLER\n"); - return -EINVAL; - - case RIO_STOP_POLLER: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_STOP_POLLER\n"); - if (!su) { - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - p->RIOPolling = NOT_POLLING; - return retval; - - case RIO_SETDEBUG: - case RIO_GETDEBUG: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SETDEBUG/RIO_GETDEBUG\n"); - if (copy_from_user(&DebugCtrl, argp, sizeof(DebugCtrl))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (DebugCtrl.SysPort == NO_PORT) { - if (cmd == RIO_SETDEBUG) { - if (!su) { - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - p->rio_debug = DebugCtrl.Debug; - p->RIODebugWait = DebugCtrl.Wait; - rio_dprintk(RIO_DEBUG_CTRL, "Set global debug to 0x%x set wait to 0x%x\n", p->rio_debug, p->RIODebugWait); - } else { - rio_dprintk(RIO_DEBUG_CTRL, "Get global debug 0x%x wait 0x%x\n", p->rio_debug, p->RIODebugWait); - DebugCtrl.Debug = p->rio_debug; - DebugCtrl.Wait = p->RIODebugWait; - if (copy_to_user(argp, &DebugCtrl, sizeof(DebugCtrl))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET/GET DEBUG: bad port number %d\n", DebugCtrl.SysPort); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - } - } else if (DebugCtrl.SysPort >= RIO_PORTS && DebugCtrl.SysPort != NO_PORT) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET/GET DEBUG: bad port number %d\n", DebugCtrl.SysPort); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } else if (cmd == RIO_SETDEBUG) { - if (!su) { - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - p->RIOPortp[DebugCtrl.SysPort]->Debug = DebugCtrl.Debug; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SETDEBUG 0x%x\n", p->RIOPortp[DebugCtrl.SysPort]->Debug); - } else { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GETDEBUG 0x%x\n", p->RIOPortp[DebugCtrl.SysPort]->Debug); - DebugCtrl.Debug = p->RIOPortp[DebugCtrl.SysPort]->Debug; - if (copy_to_user(argp, &DebugCtrl, sizeof(DebugCtrl))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_GETDEBUG: Bad copy to user space\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - } - return retval; - - case RIO_VERSID: - /* - ** Enquire about the release and version. - ** We return MAX_VERSION_LEN bytes, being a - ** textual null terminated string. - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_VERSID\n"); - if (copy_to_user(argp, RIOVersid(), sizeof(struct rioVersion))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_VERSID: Bad copy to user space (host=%d)\n", Host); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_NUM_HOSTS: - /* - ** Enquire as to the number of hosts located - ** at init time. - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_NUM_HOSTS\n"); - if (copy_to_user(argp, &p->RIONumHosts, sizeof(p->RIONumHosts))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_NUM_HOSTS: Bad copy to user space\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - case RIO_HOST_FOAD: - /* - ** Kill host. This may not be in the final version... - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_FOAD %ld\n", arg); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_FOAD: Not super user\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - p->RIOHalted = 1; - p->RIOSystemUp = 0; - - for (Host = 0; Host < p->RIONumHosts; Host++) { - (void) RIOBoardTest(p->RIOHosts[Host].PaddrP, p->RIOHosts[Host].Caddr, p->RIOHosts[Host].Type, p->RIOHosts[Host].Slot); - memset(&p->RIOHosts[Host].Flags, 0, ((char *) &p->RIOHosts[Host].____end_marker____) - ((char *) &p->RIOHosts[Host].Flags)); - p->RIOHosts[Host].Flags = RC_WAITING; - } - RIOFoadWakeup(p); - p->RIONumBootPkts = 0; - p->RIOBooting = 0; - printk("HEEEEELP!\n"); - - for (loop = 0; loop < RIO_PORTS; loop++) { - spin_lock_init(&p->RIOPortp[loop]->portSem); - p->RIOPortp[loop]->InUse = NOT_INUSE; - } - - p->RIOSystemUp = 0; - return retval; - - case RIO_DOWNLOAD: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD\n"); - if (!su) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Not super user\n"); - p->RIOError.Error = NOT_SUPER_USER; - return -EPERM; - } - if (copy_from_user(&DownLoad, argp, sizeof(DownLoad))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "Copied in download code for product code 0x%x\n", DownLoad.ProductCode); - - /* - ** It is important that the product code is an unsigned object! - */ - if (DownLoad.ProductCode >= MAX_PRODUCT) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Bad product code %d passed\n", DownLoad.ProductCode); - p->RIOError.Error = NO_SUCH_PRODUCT; - return -ENXIO; - } - /* - ** do something! - */ - retval = (*(RIOBootTable[DownLoad.ProductCode])) (p, &DownLoad); - /* <-- Panic */ - p->RIOHalted = 0; - /* - ** and go back, content with a job well completed. - */ - return retval; - - case RIO_PARMS: - { - unsigned int host; - - if (copy_from_user(&host, argp, sizeof(host))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - /* - ** Fetch the parmmap - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PARMS\n"); - if (copy_from_io(argp, p->RIOHosts[host].ParmMapP, sizeof(PARM_MAP))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_PARMS: Copy out to user space failed\n"); - return -EFAULT; - } - } - return retval; - - case RIO_HOST_REQ: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ\n"); - if (copy_from_user(&HostReq, argp, sizeof(HostReq))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (HostReq.HostNum >= p->RIONumHosts) { - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Illegal host number %d\n", HostReq.HostNum); - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for host %d\n", HostReq.HostNum); - - if (copy_to_user(HostReq.HostP, &p->RIOHosts[HostReq.HostNum], sizeof(struct Host))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Bad copy to user space\n"); - return -EFAULT; - } - return retval; - - case RIO_HOST_DPRAM: - rio_dprintk(RIO_DEBUG_CTRL, "Request for DPRAM\n"); - if (copy_from_user(&HostDpRam, argp, sizeof(HostDpRam))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (HostDpRam.HostNum >= p->RIONumHosts) { - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Illegal host number %d\n", HostDpRam.HostNum); - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for host %d\n", HostDpRam.HostNum); - - if (p->RIOHosts[HostDpRam.HostNum].Type == RIO_PCI) { - int off; - /* It's hardware like this that really gets on my tits. */ - static unsigned char copy[sizeof(struct DpRam)]; - for (off = 0; off < sizeof(struct DpRam); off++) - copy[off] = readb(p->RIOHosts[HostDpRam.HostNum].Caddr + off); - if (copy_to_user(HostDpRam.DpRamP, copy, sizeof(struct DpRam))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Bad copy to user space\n"); - return -EFAULT; - } - } else if (copy_from_io(HostDpRam.DpRamP, p->RIOHosts[HostDpRam.HostNum].Caddr, sizeof(struct DpRam))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Bad copy to user space\n"); - return -EFAULT; - } - return retval; - - case RIO_SET_BUSY: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_BUSY\n"); - if (arg > 511) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_BUSY: Bad port number %ld\n", arg); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - p->RIOPortp[arg]->State |= RIO_BUSY; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_HOST_PORT: - /* - ** The daemon want port information - ** (probably for debug reasons) - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT\n"); - if (copy_from_user(&PortReq, argp, sizeof(PortReq))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - - if (PortReq.SysPort >= RIO_PORTS) { /* SysPort is unsigned */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Illegal port number %d\n", PortReq.SysPort); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for port %d\n", PortReq.SysPort); - if (copy_to_user(PortReq.PortP, p->RIOPortp[PortReq.SysPort], sizeof(struct Port))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Bad copy to user space\n"); - return -EFAULT; - } - return retval; - - case RIO_HOST_RUP: - /* - ** The daemon want rup information - ** (probably for debug reasons) - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP\n"); - if (copy_from_user(&RupReq, argp, sizeof(RupReq))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Copy in from user space failed\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (RupReq.HostNum >= p->RIONumHosts) { /* host is unsigned */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Illegal host number %d\n", RupReq.HostNum); - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - if (RupReq.RupNum >= MAX_RUP + LINKS_PER_UNIT) { /* eek! */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Illegal rup number %d\n", RupReq.RupNum); - p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - HostP = &p->RIOHosts[RupReq.HostNum]; - - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Host %d not running\n", RupReq.HostNum); - p->RIOError.Error = HOST_NOT_RUNNING; - return -EIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for rup %d from host %d\n", RupReq.RupNum, RupReq.HostNum); - - if (copy_from_io(RupReq.RupP, HostP->UnixRups[RupReq.RupNum].RupP, sizeof(struct RUP))) { - p->RIOError.Error = COPYOUT_FAILED; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Bad copy to user space\n"); - return -EFAULT; - } - return retval; - - case RIO_HOST_LPB: - /* - ** The daemon want lpb information - ** (probably for debug reasons) - */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB\n"); - if (copy_from_user(&LpbReq, argp, sizeof(LpbReq))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Bad copy from user space\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (LpbReq.Host >= p->RIONumHosts) { /* host is unsigned */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Illegal host number %d\n", LpbReq.Host); - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - if (LpbReq.Link >= LINKS_PER_UNIT) { /* eek! */ - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Illegal link number %d\n", LpbReq.Link); - p->RIOError.Error = LINK_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - HostP = &p->RIOHosts[LpbReq.Host]; - - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Host %d not running\n", LpbReq.Host); - p->RIOError.Error = HOST_NOT_RUNNING; - return -EIO; - } - rio_dprintk(RIO_DEBUG_CTRL, "Request for lpb %d from host %d\n", LpbReq.Link, LpbReq.Host); - - if (copy_from_io(LpbReq.LpbP, &HostP->LinkStrP[LpbReq.Link], sizeof(struct LPB))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Bad copy to user space\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return retval; - - /* - ** Here 3 IOCTL's that allow us to change the way in which - ** rio logs errors. send them just to syslog or send them - ** to both syslog and console or send them to just the console. - ** - ** See RioStrBuf() in util.c for the other half. - */ - case RIO_SYSLOG_ONLY: - p->RIOPrintLogState = PRINT_TO_LOG; /* Just syslog */ - return 0; - - case RIO_SYSLOG_CONS: - p->RIOPrintLogState = PRINT_TO_LOG_CONS; /* syslog and console */ - return 0; - - case RIO_CONS_ONLY: - p->RIOPrintLogState = PRINT_TO_CONS; /* Just console */ - return 0; - - case RIO_SIGNALS_ON: - if (p->RIOSignalProcess) { - p->RIOError.Error = SIGNALS_ALREADY_SET; - return -EBUSY; - } - /* FIXME: PID tracking */ - p->RIOSignalProcess = current->pid; - p->RIOPrintDisabled = DONT_PRINT; - return retval; - - case RIO_SIGNALS_OFF: - if (p->RIOSignalProcess != current->pid) { - p->RIOError.Error = NOT_RECEIVING_PROCESS; - return -EPERM; - } - rio_dprintk(RIO_DEBUG_CTRL, "Clear signal process to zero\n"); - p->RIOSignalProcess = 0; - return retval; - - case RIO_SET_BYTE_MODE: - for (Host = 0; Host < p->RIONumHosts; Host++) - if (p->RIOHosts[Host].Type == RIO_AT) - p->RIOHosts[Host].Mode &= ~WORD_OPERATION; - return retval; - - case RIO_SET_WORD_MODE: - for (Host = 0; Host < p->RIONumHosts; Host++) - if (p->RIOHosts[Host].Type == RIO_AT) - p->RIOHosts[Host].Mode |= WORD_OPERATION; - return retval; - - case RIO_SET_FAST_BUS: - for (Host = 0; Host < p->RIONumHosts; Host++) - if (p->RIOHosts[Host].Type == RIO_AT) - p->RIOHosts[Host].Mode |= FAST_AT_BUS; - return retval; - - case RIO_SET_SLOW_BUS: - for (Host = 0; Host < p->RIONumHosts; Host++) - if (p->RIOHosts[Host].Type == RIO_AT) - p->RIOHosts[Host].Mode &= ~FAST_AT_BUS; - return retval; - - case RIO_MAP_B50_TO_50: - case RIO_MAP_B50_TO_57600: - case RIO_MAP_B110_TO_110: - case RIO_MAP_B110_TO_115200: - rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping\n"); - port = arg; - if (port < 0 || port > 511) { - rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping: Bad port number %d\n", port); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - switch (cmd) { - case RIO_MAP_B50_TO_50: - p->RIOPortp[port]->Config |= RIO_MAP_50_TO_50; - break; - case RIO_MAP_B50_TO_57600: - p->RIOPortp[port]->Config &= ~RIO_MAP_50_TO_50; - break; - case RIO_MAP_B110_TO_110: - p->RIOPortp[port]->Config |= RIO_MAP_110_TO_110; - break; - case RIO_MAP_B110_TO_115200: - p->RIOPortp[port]->Config &= ~RIO_MAP_110_TO_110; - break; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_STREAM_INFO: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_STREAM_INFO\n"); - return -EINVAL; - - case RIO_SEND_PACKET: - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SEND_PACKET\n"); - if (copy_from_user(&SendPack, argp, sizeof(SendPack))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_SEND_PACKET: Bad copy from user space\n"); - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - if (SendPack.PortNum >= 128) { - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -ENXIO; - } - - PortP = p->RIOPortp[SendPack.PortNum]; - rio_spin_lock_irqsave(&PortP->portSem, flags); - - if (!can_add_transmit(&PacketP, PortP)) { - p->RIOError.Error = UNIT_IS_IN_USE; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -ENOSPC; - } - - for (loop = 0; loop < (ushort) (SendPack.Len & 127); loop++) - writeb(SendPack.Data[loop], &PacketP->data[loop]); - - writeb(SendPack.Len, &PacketP->len); - - add_transmit(PortP); - /* - ** Count characters transmitted for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += (SendPack.Len & 127); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - - case RIO_NO_MESG: - if (su) - p->RIONoMessage = 1; - return su ? 0 : -EPERM; - - case RIO_MESG: - if (su) - p->RIONoMessage = 0; - return su ? 0 : -EPERM; - - case RIO_WHAT_MESG: - if (copy_to_user(argp, &p->RIONoMessage, sizeof(p->RIONoMessage))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_WHAT_MESG: Bad copy to user space\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_MEM_DUMP: - if (copy_from_user(&SubCmd, argp, sizeof(struct SubCmdStruct))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP host %d rup %d addr %x\n", SubCmd.Host, SubCmd.Rup, SubCmd.Addr); - - if (SubCmd.Rup >= MAX_RUP + LINKS_PER_UNIT) { - p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - if (SubCmd.Host >= p->RIONumHosts) { - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - port = p->RIOHosts[SubCmd.Host].UnixRups[SubCmd.Rup].BaseSysPort; - - PortP = p->RIOPortp[port]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - if (RIOPreemptiveCmd(p, PortP, RIOC_MEMDUMP) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP failed\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EBUSY; - } else - PortP->State |= RIO_BUSY; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (copy_to_user(argp, p->RIOMemDump, MEMDUMP_SIZE)) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_TICK: - if (arg >= p->RIONumHosts) - return -EINVAL; - rio_dprintk(RIO_DEBUG_CTRL, "Set interrupt for host %ld\n", arg); - writeb(0xFF, &p->RIOHosts[arg].SetInt); - return 0; - - case RIO_TOCK: - if (arg >= p->RIONumHosts) - return -EINVAL; - rio_dprintk(RIO_DEBUG_CTRL, "Clear interrupt for host %ld\n", arg); - writeb(0xFF, &p->RIOHosts[arg].ResetInt); - return 0; - - case RIO_READ_CHECK: - /* Check reads for pkts with data[0] the same */ - p->RIOReadCheck = !p->RIOReadCheck; - if (copy_to_user(argp, &p->RIOReadCheck, sizeof(unsigned int))) { - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - - case RIO_READ_REGISTER: - if (copy_from_user(&SubCmd, argp, sizeof(struct SubCmdStruct))) { - p->RIOError.Error = COPYIN_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER host %d rup %d port %d reg %x\n", SubCmd.Host, SubCmd.Rup, SubCmd.Port, SubCmd.Addr); - - if (SubCmd.Port > 511) { - rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping: Bad port number %d\n", SubCmd.Port); - p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - if (SubCmd.Rup >= MAX_RUP + LINKS_PER_UNIT) { - p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - if (SubCmd.Host >= p->RIONumHosts) { - p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - port = p->RIOHosts[SubCmd.Host].UnixRups[SubCmd.Rup].BaseSysPort + SubCmd.Port; - PortP = p->RIOPortp[port]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - if (RIOPreemptiveCmd(p, PortP, RIOC_READ_REGISTER) == - RIO_FAIL) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER failed\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EBUSY; - } else - PortP->State |= RIO_BUSY; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (copy_to_user(argp, &p->CdRegister, sizeof(unsigned int))) { - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - return 0; - /* - ** rio_make_dev: given port number (0-511) ORed with port type - ** (RIO_DEV_DIRECT, RIO_DEV_MODEM, RIO_DEV_XPRINT) return dev_t - ** value to pass to mknod to create the correct device node. - */ - case RIO_MAKE_DEV: - { - unsigned int port = arg & RIO_MODEM_MASK; - unsigned int ret; - - switch (arg & RIO_DEV_MASK) { - case RIO_DEV_DIRECT: - ret = drv_makedev(MAJOR(dev), port); - rio_dprintk(RIO_DEBUG_CTRL, "Makedev direct 0x%x is 0x%x\n", port, ret); - return ret; - case RIO_DEV_MODEM: - ret = drv_makedev(MAJOR(dev), (port | RIO_MODEM_BIT)); - rio_dprintk(RIO_DEBUG_CTRL, "Makedev modem 0x%x is 0x%x\n", port, ret); - return ret; - case RIO_DEV_XPRINT: - ret = drv_makedev(MAJOR(dev), port); - rio_dprintk(RIO_DEBUG_CTRL, "Makedev printer 0x%x is 0x%x\n", port, ret); - return ret; - } - rio_dprintk(RIO_DEBUG_CTRL, "MAKE Device is called\n"); - return -EINVAL; - } - /* - ** rio_minor: given a dev_t from a stat() call, return - ** the port number (0-511) ORed with the port type - ** ( RIO_DEV_DIRECT, RIO_DEV_MODEM, RIO_DEV_XPRINT ) - */ - case RIO_MINOR: - { - dev_t dv; - int mino; - unsigned long ret; - - dv = (dev_t) (arg); - mino = RIO_UNMODEM(dv); - - if (RIO_ISMODEM(dv)) { - rio_dprintk(RIO_DEBUG_CTRL, "Minor for device 0x%x: modem %d\n", dv, mino); - ret = mino | RIO_DEV_MODEM; - } else { - rio_dprintk(RIO_DEBUG_CTRL, "Minor for device 0x%x: direct %d\n", dv, mino); - ret = mino | RIO_DEV_DIRECT; - } - return ret; - } - } - rio_dprintk(RIO_DEBUG_CTRL, "INVALID DAEMON IOCTL 0x%x\n", cmd); - p->RIOError.Error = IOCTL_COMMAND_UNKNOWN; - - func_exit(); - return -EINVAL; -} - -/* -** Pre-emptive commands go on RUPs and are only one byte long. -*/ -int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd) -{ - struct CmdBlk *CmdBlkP; - struct PktCmd_M *PktCmdP; - int Ret; - ushort rup; - int port; - - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_CTRL, "Preemptive command to deleted RTA ignored\n"); - return RIO_FAIL; - } - - if ((PortP->InUse == (typeof(PortP->InUse))-1) || - !(CmdBlkP = RIOGetCmdBlk())) { - rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block " - "for command %d on port %d\n", Cmd, PortP->PortNum); - return RIO_FAIL; - } - - rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", - CmdBlkP, PortP->InUse); - - PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0]; - - CmdBlkP->Packet.src_unit = 0; - if (PortP->SecondBlock) - rup = PortP->ID2; - else - rup = PortP->RupNum; - CmdBlkP->Packet.dest_unit = rup; - CmdBlkP->Packet.src_port = COMMAND_RUP; - CmdBlkP->Packet.dest_port = COMMAND_RUP; - CmdBlkP->Packet.len = PKT_CMD_BIT | 2; - CmdBlkP->PostFuncP = RIOUnUse; - CmdBlkP->PostArg = (unsigned long) PortP; - PktCmdP->Command = Cmd; - port = PortP->HostPort % (ushort) PORTS_PER_RTA; - /* - ** Index ports 8-15 for 2nd block of 16 port RTA. - */ - if (PortP->SecondBlock) - port += (ushort) PORTS_PER_RTA; - PktCmdP->PhbNum = port; - - switch (Cmd) { - case RIOC_MEMDUMP: - rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p " - "(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr); - PktCmdP->SubCommand = RIOC_MEMDUMP; - PktCmdP->SubAddr = SubCmd.Addr; - break; - case RIOC_FCLOSE: - rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", - CmdBlkP); - break; - case RIOC_READ_REGISTER: - rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) " - "command blk %p\n", (int) SubCmd.Addr, CmdBlkP); - PktCmdP->SubCommand = RIOC_READ_REGISTER; - PktCmdP->SubAddr = SubCmd.Addr; - break; - case RIOC_RESUME: - rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", - CmdBlkP); - break; - case RIOC_RFLUSH: - rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", - CmdBlkP); - CmdBlkP->PostFuncP = RIORFlushEnable; - break; - case RIOC_SUSPEND: - rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", - CmdBlkP); - break; - - case RIOC_MGET: - rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", - CmdBlkP); - break; - - case RIOC_MSET: - case RIOC_MBIC: - case RIOC_MBIS: - CmdBlkP->Packet.data[4] = (char) PortP->ModemLines; - rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command " - "blk %p\n", CmdBlkP); - break; - - case RIOC_WFLUSH: - /* - ** If we have queued up the maximum number of Write flushes - ** allowed then we should not bother sending any more to the - ** RTA. - */ - if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) { - rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, " - "WflushFlag about to wrap!"); - RIOFreeCmdBlk(CmdBlkP); - return (RIO_FAIL); - } else { - rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command " - "blk %p\n", CmdBlkP); - CmdBlkP->PostFuncP = RIOWFlushMark; - } - break; - } - - PortP->InUse++; - - Ret = RIOQueueCmdBlk(PortP->HostP, rup, CmdBlkP); - - return Ret; -} diff --git a/drivers/char/rio/riodrvr.h b/drivers/char/rio/riodrvr.h deleted file mode 100644 index 0907e71..0000000 --- a/drivers/char/rio/riodrvr.h +++ /dev/null @@ -1,138 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riodrvr.h -** SID : 1.3 -** Last Modified : 11/6/98 09:22:46 -** Retrieved : 11/6/98 09:22:46 -** -** ident @(#)riodrvr.h 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __riodrvr_h -#define __riodrvr_h - -#include <asm/param.h> /* for HZ */ - -#define MEMDUMP_SIZE 32 -#define MOD_DISABLE (RIO_NOREAD|RIO_NOWRITE|RIO_NOXPRINT) - - -struct rio_info { - int mode; /* Intr or polled, word/byte */ - spinlock_t RIOIntrSem; /* Interrupt thread sem */ - int current_chan; /* current channel */ - int RIOFailed; /* Not initialised ? */ - int RIOInstallAttempts; /* no. of rio-install() calls */ - int RIOLastPCISearch; /* status of last search */ - int RIONumHosts; /* Number of RIO Hosts */ - struct Host *RIOHosts; /* RIO Host values */ - struct Port **RIOPortp; /* RIO port values */ -/* -** 02.03.1999 ARG - ESIL 0820 fix -** We no longer use RIOBootMode -** - int RIOBootMode; * RIO boot mode * -** -*/ - int RIOPrintDisabled; /* RIO printing disabled ? */ - int RIOPrintLogState; /* RIO printing state ? */ - int RIOPolling; /* Polling ? */ -/* -** 09.12.1998 ARG - ESIL 0776 part fix -** The 'RIO_QUICK_CHECK' ioctl was using RIOHalted. -** The fix for this ESIL introduces another member (RIORtaDisCons) here to be -** updated in RIOConCon() - to keep track of RTA connections/disconnections. -** 'RIO_QUICK_CHECK' now returns the value of RIORtaDisCons. -*/ - int RIOHalted; /* halted ? */ - int RIORtaDisCons; /* RTA connections/disconnections */ - unsigned int RIOReadCheck; /* Rio read check */ - unsigned int RIONoMessage; /* To display message or not */ - unsigned int RIONumBootPkts; /* how many packets for an RTA */ - unsigned int RIOBootCount; /* size of RTA code */ - unsigned int RIOBooting; /* count of outstanding boots */ - unsigned int RIOSystemUp; /* Booted ?? */ - unsigned int RIOCounting; /* for counting interrupts */ - unsigned int RIOIntCount; /* # of intr since last check */ - unsigned int RIOTxCount; /* number of xmit intrs */ - unsigned int RIORxCount; /* number of rx intrs */ - unsigned int RIORupCount; /* number of rup intrs */ - int RIXTimer; - int RIOBufferSize; /* Buffersize */ - int RIOBufferMask; /* Buffersize */ - - int RIOFirstMajor; /* First host card's major no */ - - unsigned int RIOLastPortsMapped; /* highest port number known */ - unsigned int RIOFirstPortsMapped; /* lowest port number known */ - - unsigned int RIOLastPortsBooted; /* highest port number running */ - unsigned int RIOFirstPortsBooted; /* lowest port number running */ - - unsigned int RIOLastPortsOpened; /* highest port number running */ - unsigned int RIOFirstPortsOpened; /* lowest port number running */ - - /* Flag to say that the topology information has been changed. */ - unsigned int RIOQuickCheck; - unsigned int CdRegister; /* ??? */ - int RIOSignalProcess; /* Signalling process */ - int rio_debug; /* To debug ... */ - int RIODebugWait; /* For what ??? */ - int tpri; /* Thread prio */ - int tid; /* Thread id */ - unsigned int _RIO_Polled; /* Counter for polling */ - unsigned int _RIO_Interrupted; /* Counter for interrupt */ - int intr_tid; /* iointset return value */ - int TxEnSem; /* TxEnable Semaphore */ - - - struct Error RIOError; /* to Identify what went wrong */ - struct Conf RIOConf; /* Configuration ??? */ - struct ttystatics channel[RIO_PORTS]; /* channel information */ - char RIOBootPackets[1 + (SIXTY_FOUR_K / RTA_BOOT_DATA_SIZE)] - [RTA_BOOT_DATA_SIZE]; - struct Map RIOConnectTable[TOTAL_MAP_ENTRIES]; - struct Map RIOSavedTable[TOTAL_MAP_ENTRIES]; - - /* RTA to host binding table for master/slave operation */ - unsigned long RIOBindTab[MAX_RTA_BINDINGS]; - /* RTA memory dump variable */ - unsigned char RIOMemDump[MEMDUMP_SIZE]; - struct ModuleInfo RIOModuleTypes[MAX_MODULE_TYPES]; - -}; - - -#ifdef linux -#define debug(x) printk x -#else -#define debug(x) kkprintf x -#endif - - - -#define RIO_RESET_INT 0x7d80 - -#endif /* __riodrvr.h */ diff --git a/drivers/char/rio/rioinfo.h b/drivers/char/rio/rioinfo.h deleted file mode 100644 index 42ff1e7..0000000 --- a/drivers/char/rio/rioinfo.h +++ /dev/null @@ -1,92 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioinfo.h -** SID : 1.2 -** Last Modified : 11/6/98 14:07:49 -** Retrieved : 11/6/98 14:07:50 -** -** ident @(#)rioinfo.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rioinfo_h -#define __rioinfo_h - -/* -** Host card data structure -*/ -struct RioHostInfo { - long location; /* RIO Card Base I/O address */ - long vector; /* RIO Card IRQ vector */ - int bus; /* ISA/EISA/MCA/PCI */ - int mode; /* pointer to host mode - INTERRUPT / POLLED */ - struct old_sgttyb - *Sg; /* pointer to default term characteristics */ -}; - - -/* Mode in rio device info */ -#define INTERRUPTED_MODE 0x01 /* Interrupt is generated */ -#define POLLED_MODE 0x02 /* No interrupt */ -#define AUTO_MODE 0x03 /* Auto mode */ - -#define WORD_ACCESS_MODE 0x10 /* Word Access Mode */ -#define BYTE_ACCESS_MODE 0x20 /* Byte Access Mode */ - - -/* Bus type that RIO supports */ -#define ISA_BUS 0x01 /* The card is ISA */ -#define EISA_BUS 0x02 /* The card is EISA */ -#define MCA_BUS 0x04 /* The card is MCA */ -#define PCI_BUS 0x08 /* The card is PCI */ - -/* -** 11.11.1998 ARG - ESIL ???? part fix -** Moved definition for 'CHAN' here from rioinfo.c (it is now -** called 'DEF_TERM_CHARACTERISTICS'). -*/ - -#define DEF_TERM_CHARACTERISTICS \ -{ \ - B19200, B19200, /* input and output speed */ \ - 'H' - '@', /* erase char */ \ - -1, /* 2nd erase char */ \ - 'U' - '@', /* kill char */ \ - ECHO | CRMOD, /* mode */ \ - 'C' - '@', /* interrupt character */ \ - '\\' - '@', /* quit char */ \ - 'Q' - '@', /* start char */ \ - 'S' - '@', /* stop char */ \ - 'D' - '@', /* EOF */ \ - -1, /* brk */ \ - (LCRTBS | LCRTERA | LCRTKIL | LCTLECH), /* local mode word */ \ - 'Z' - '@', /* process stop */ \ - 'Y' - '@', /* delayed stop */ \ - 'R' - '@', /* reprint line */ \ - 'O' - '@', /* flush output */ \ - 'W' - '@', /* word erase */ \ - 'V' - '@' /* literal next char */ \ -} - -#endif /* __rioinfo_h */ diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c deleted file mode 100644 index 24a282b..0000000 --- a/drivers/char/rio/rioinit.c +++ /dev/null @@ -1,421 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioinit.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:43 -** Retrieved : 11/6/98 10:33:49 -** -** ident @(#)rioinit.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - -#include <linux/termios.h> -#include <linux/serial.h> - -#include <linux/generic_serial.h> - - -#include "linux_compat.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "rio_linux.h" - -int RIOPCIinit(struct rio_info *p, int Mode); - -static int RIOScrub(int, u8 __iomem *, int); - - -/** -** RIOAssignAT : -** -** Fill out the fields in the p->RIOHosts structure now we know we know -** we have a board present. -** -** bits < 0 indicates 8 bit operation requested, -** bits > 0 indicates 16 bit operation. -*/ - -int RIOAssignAT(struct rio_info *p, int Base, void __iomem *virtAddr, int mode) -{ - int bits; - struct DpRam __iomem *cardp = (struct DpRam __iomem *)virtAddr; - - if ((Base < ONE_MEG) || (mode & BYTE_ACCESS_MODE)) - bits = BYTE_OPERATION; - else - bits = WORD_OPERATION; - - /* - ** Board has passed its scrub test. Fill in all the - ** transient stuff. - */ - p->RIOHosts[p->RIONumHosts].Caddr = virtAddr; - p->RIOHosts[p->RIONumHosts].CardP = virtAddr; - - /* - ** Revision 01 AT host cards don't support WORD operations, - */ - if (readb(&cardp->DpRevision) == 01) - bits = BYTE_OPERATION; - - p->RIOHosts[p->RIONumHosts].Type = RIO_AT; - p->RIOHosts[p->RIONumHosts].Copy = rio_copy_to_card; - /* set this later */ - p->RIOHosts[p->RIONumHosts].Slot = -1; - p->RIOHosts[p->RIONumHosts].Mode = SLOW_LINKS | SLOW_AT_BUS | bits; - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE , - &p->RIOHosts[p->RIONumHosts].Control); - writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE, - &p->RIOHosts[p->RIONumHosts].Control); - writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt); - p->RIOHosts[p->RIONumHosts].UniqueNum = - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)| - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)| - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)| - ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Uniquenum 0x%x\n",p->RIOHosts[p->RIONumHosts].UniqueNum); - - p->RIONumHosts++; - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base); - return(1); -} - -static u8 val[] = { -#ifdef VERY_LONG_TEST - 0x00, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, - 0xa5, 0xff, 0x5a, 0x00, 0xff, 0xc9, 0x36, -#endif - 0xff, 0x00, 0x00 }; - -#define TEST_END sizeof(val) - -/* -** RAM test a board. -** Nothing too complicated, just enough to check it out. -*/ -int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, int slot) -{ - struct DpRam __iomem *DpRam = caddr; - void __iomem *ram[4]; - int size[4]; - int op, bank; - int nbanks; - - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Reset host type=%d, DpRam=%p, slot=%d\n", - type, DpRam, slot); - - RIOHostReset(type, DpRam, slot); - - /* - ** Scrub the memory. This comes in several banks: - ** DPsram1 - 7000h bytes - ** DPsram2 - 200h bytes - ** DPsram3 - 7000h bytes - ** scratch - 1000h bytes - */ - - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Setup ram/size arrays\n"); - - size[0] = DP_SRAM1_SIZE; - size[1] = DP_SRAM2_SIZE; - size[2] = DP_SRAM3_SIZE; - size[3] = DP_SCRATCH_SIZE; - - ram[0] = DpRam->DpSram1; - ram[1] = DpRam->DpSram2; - ram[2] = DpRam->DpSram3; - nbanks = (type == RIO_PCI) ? 3 : 4; - if (nbanks == 4) - ram[3] = DpRam->DpScratch; - - - if (nbanks == 3) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Memory: %p(0x%x), %p(0x%x), %p(0x%x)\n", - ram[0], size[0], ram[1], size[1], ram[2], size[2]); - } else { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: %p(0x%x), %p(0x%x), %p(0x%x), %p(0x%x)\n", - ram[0], size[0], ram[1], size[1], ram[2], size[2], ram[3], size[3]); - } - - /* - ** This scrub operation will test for crosstalk between - ** banks. TEST_END is a magic number, and relates to the offset - ** within the 'val' array used by Scrub. - */ - for (op=0; op<TEST_END; op++) { - for (bank=0; bank<nbanks; bank++) { - if (RIOScrub(op, ram[bank], size[bank]) == RIO_FAIL) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: RIOScrub band %d, op %d failed\n", - bank, op); - return RIO_FAIL; - } - } - } - - rio_dprintk (RIO_DEBUG_INIT, "Test completed\n"); - return 0; -} - - -/* -** Scrub an area of RAM. -** Define PRETEST and POSTTEST for a more thorough checking of the -** state of the memory. -** Call with op set to an index into the above 'val' array to determine -** which value will be written into memory. -** Call with op set to zero means that the RAM will not be read and checked -** before it is written. -** Call with op not zero and the RAM will be read and compared with val[op-1] -** to check that the data from the previous phase was retained. -*/ - -static int RIOScrub(int op, u8 __iomem *ram, int size) -{ - int off; - unsigned char oldbyte; - unsigned char newbyte; - unsigned char invbyte; - unsigned short oldword; - unsigned short newword; - unsigned short invword; - unsigned short swapword; - - if (op) { - oldbyte = val[op-1]; - oldword = oldbyte | (oldbyte<<8); - } else - oldbyte = oldword = 0; /* Tell the compiler we've initilalized them. */ - newbyte = val[op]; - newword = newbyte | (newbyte<<8); - invbyte = ~newbyte; - invword = invbyte | (invbyte<<8); - - /* - ** Check that the RAM contains the value that should have been left there - ** by the previous test (not applicable for pass zero) - */ - if (op) { - for (off=0; off<size; off++) { - if (readb(ram + off) != oldbyte) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 1: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, readb(ram + off)); - return RIO_FAIL; - } - } - for (off=0; off<size; off+=2) { - if (readw(ram + off) != oldword) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: WORD at offset 0x%x should have been=%x, was=%x\n",off,oldword, readw(ram + off)); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram+off+1)); - return RIO_FAIL; - } - } - } - - /* - ** Now write the INVERSE of the test data into every location, using - ** BYTE write operations, first checking before each byte is written - ** that the location contains the old value still, and checking after - ** the write that the location contains the data specified - this is - ** the BYTE read/write test. - */ - for (off=0; off<size; off++) { - if (op && (readb(ram + off) != oldbyte)) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, readb(ram + off)); - return RIO_FAIL; - } - writeb(invbyte, ram + off); - if (readb(ram + off) != invbyte) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Inv Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, invbyte, readb(ram + off)); - return RIO_FAIL; - } - } - - /* - ** now, use WORD operations to write the test value into every location, - ** check as before that the location contains the previous test value - ** before overwriting, and that it contains the data value written - ** afterwards. - ** This is the WORD operation test. - */ - for (off=0; off<size; off+=2) { - if (readw(ram + off) != invword) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: WORD at offset 0x%x should have been=%x, was=%x\n", off, invword, readw(ram + off)); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram+off+1)); - return RIO_FAIL; - } - - writew(newword, ram + off); - if ( readw(ram + off) != newword ) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, readw(ram + off)); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1)); - return RIO_FAIL; - } - } - - /* - ** now run through the block of memory again, first in byte mode - ** then in word mode, and check that all the locations contain the - ** required test data. - */ - for (off=0; off<size; off++) { - if (readb(ram + off) != newbyte) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Byte Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, readb(ram + off)); - return RIO_FAIL; - } - } - - for (off=0; off<size; off+=2) { - if (readw(ram + off) != newword ) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, readw(ram + off)); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1)); - return RIO_FAIL; - } - } - - /* - ** time to check out byte swapping errors - */ - swapword = invbyte | (newbyte << 8); - - for (off=0; off<size; off+=2) { - writeb(invbyte, &ram[off]); - writeb(newbyte, &ram[off+1]); - } - - for ( off=0; off<size; off+=2 ) { - if (readw(ram + off) != swapword) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, swapword, readw(ram + off)); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1)); - return RIO_FAIL; - } - writew(~swapword, ram + off); - } - - for (off=0; off<size; off+=2) { - if (readb(ram + off) != newbyte) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, readb(ram + off)); - return RIO_FAIL; - } - if (readb(ram + off + 1) != invbyte) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off+1, invbyte, readb(ram + off + 1)); - return RIO_FAIL; - } - writew(newword, ram + off); - } - return 0; -} - - -int RIODefaultName(struct rio_info *p, struct Host *HostP, unsigned int UnitId) -{ - memcpy(HostP->Mapping[UnitId].Name, "UNKNOWN RTA X-XX", 17); - HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts); - if ((UnitId+1) > 9) { - HostP->Mapping[UnitId].Name[14]='0'+((UnitId+1)/10); - HostP->Mapping[UnitId].Name[15]='0'+((UnitId+1)%10); - } - else { - HostP->Mapping[UnitId].Name[14]='1'+UnitId; - HostP->Mapping[UnitId].Name[15]=0; - } - return 0; -} - -#define RIO_RELEASE "Linux" -#define RELEASE_ID "1.0" - -static struct rioVersion stVersion; - -struct rioVersion *RIOVersid(void) -{ - strlcpy(stVersion.version, "RIO driver for linux V1.0", - sizeof(stVersion.version)); - strlcpy(stVersion.buildDate, __DATE__, - sizeof(stVersion.buildDate)); - - return &stVersion; -} - -void RIOHostReset(unsigned int Type, struct DpRam __iomem *DpRamP, unsigned int Slot) -{ - /* - ** Reset the Tpu - */ - rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: type 0x%x", Type); - switch ( Type ) { - case RIO_AT: - rio_dprintk (RIO_DEBUG_INIT, " (RIO_AT)\n"); - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | BYTE_OPERATION | - SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl); - writeb(0xFF, &DpRamP->DpResetTpu); - udelay(3); - rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: Don't know if it worked. Try reset again\n"); - writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | - BYTE_OPERATION | SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl); - writeb(0xFF, &DpRamP->DpResetTpu); - udelay(3); - break; - case RIO_PCI: - rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n"); - writeb(RIO_PCI_BOOT_FROM_RAM, &DpRamP->DpControl); - writeb(0xFF, &DpRamP->DpResetInt); - writeb(0xFF, &DpRamP->DpResetTpu); - udelay(100); - break; - default: - rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n"); - break; - } - return; -} diff --git a/drivers/char/rio/riointr.c b/drivers/char/rio/riointr.c deleted file mode 100644 index 2e71aeca..0000000 --- a/drivers/char/rio/riointr.c +++ /dev/null @@ -1,645 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riointr.c -** SID : 1.2 -** Last Modified : 11/6/98 10:33:44 -** Retrieved : 11/6/98 10:33:49 -** -** ident @(#)riointr.c 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - -#include <linux/termios.h> -#include <linux/serial.h> - -#include <linux/generic_serial.h> - -#include <linux/delay.h> - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" - - -static void RIOReceive(struct rio_info *, struct Port *); - - -static char *firstchars(char *p, int nch) -{ - static char buf[2][128]; - static int t = 0; - t = !t; - memcpy(buf[t], p, nch); - buf[t][nch] = 0; - return buf[t]; -} - - -#define INCR( P, I ) ((P) = (((P)+(I)) & p->RIOBufferMask)) -/* Enable and start the transmission of packets */ -void RIOTxEnable(char *en) -{ - struct Port *PortP; - struct rio_info *p; - struct tty_struct *tty; - int c; - struct PKT __iomem *PacketP; - unsigned long flags; - - PortP = (struct Port *) en; - p = (struct rio_info *) PortP->p; - tty = PortP->gs.port.tty; - - - rio_dprintk(RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", PortP->PortNum, PortP->gs.xmit_cnt); - - if (!PortP->gs.xmit_cnt) - return; - - - /* This routine is an order of magnitude simpler than the specialix - version. One of the disadvantages is that this version will send - an incomplete packet (usually 64 bytes instead of 72) once for - every 4k worth of data. Let's just say that this won't influence - performance significantly..... */ - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - while (can_add_transmit(&PacketP, PortP)) { - c = PortP->gs.xmit_cnt; - if (c > PKT_MAX_DATA_LEN) - c = PKT_MAX_DATA_LEN; - - /* Don't copy past the end of the source buffer */ - if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail) - c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail; - - { - int t; - t = (c > 10) ? 10 : c; - - rio_dprintk(RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", PortP->PortNum, c, firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail, t), firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail + c - t, t)); - } - /* If for one reason or another, we can't copy more data, - we're done! */ - if (c == 0) - break; - - rio_memcpy_toio(PortP->HostP->Caddr, PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c); - /* udelay (1); */ - - writeb(c, &(PacketP->len)); - if (!(PortP->State & RIO_DELETED)) { - add_transmit(PortP); - /* - ** Count chars tx'd for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += c; - } - PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE - 1); - PortP->gs.xmit_cnt -= c; - } - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2 * PKT_MAX_DATA_LEN)) - tty_wakeup(PortP->gs.port.tty); - -} - - -/* -** RIO Host Service routine. Does all the work traditionally associated with an -** interrupt. -*/ -static int RupIntr; -static int RxIntr; -static int TxIntr; - -void RIOServiceHost(struct rio_info *p, struct Host *HostP) -{ - rio_spin_lock(&HostP->HostLock); - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - static int t = 0; - rio_spin_unlock(&HostP->HostLock); - if ((t++ % 200) == 0) - rio_dprintk(RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int) HostP->Flags); - return; - } - rio_spin_unlock(&HostP->HostLock); - - if (readw(&HostP->ParmMapP->rup_intr)) { - writew(0, &HostP->ParmMapP->rup_intr); - p->RIORupCount++; - RupIntr++; - rio_dprintk(RIO_DEBUG_INTR, "rio: RUP interrupt on host %Zd\n", HostP - p->RIOHosts); - RIOPollHostCommands(p, HostP); - } - - if (readw(&HostP->ParmMapP->rx_intr)) { - int port; - - writew(0, &HostP->ParmMapP->rx_intr); - p->RIORxCount++; - RxIntr++; - - rio_dprintk(RIO_DEBUG_INTR, "rio: RX interrupt on host %Zd\n", HostP - p->RIOHosts); - /* - ** Loop through every port. If the port is mapped into - ** the system ( i.e. has /dev/ttyXXXX associated ) then it is - ** worth checking. If the port isn't open, grab any packets - ** hanging on its receive queue and stuff them on the free - ** list; check for commands on the way. - */ - for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) { - struct Port *PortP = p->RIOPortp[port]; - struct tty_struct *ttyP; - struct PKT __iomem *PacketP; - - /* - ** not mapped in - most of the RIOPortp[] information - ** has not been set up! - ** Optimise: ports come in bundles of eight. - */ - if (!PortP->Mapped) { - port += 7; - continue; /* with the next port */ - } - - /* - ** If the host board isn't THIS host board, check the next one. - ** optimise: ports come in bundles of eight. - */ - if (PortP->HostP != HostP) { - port += 7; - continue; - } - - /* - ** Let us see - is the port open? If not, then don't service it. - */ - if (!(PortP->PortState & PORT_ISOPEN)) { - continue; - } - - /* - ** find corresponding tty structure. The process of mapping - ** the ports puts these here. - */ - ttyP = PortP->gs.port.tty; - - /* - ** Lock the port before we begin working on it. - */ - rio_spin_lock(&PortP->portSem); - - /* - ** Process received data if there is any. - */ - if (can_remove_receive(&PacketP, PortP)) - RIOReceive(p, PortP); - - /* - ** If there is no data left to be read from the port, and - ** it's handshake bit is set, then we must clear the handshake, - ** so that that downstream RTA is re-enabled. - */ - if (!can_remove_receive(&PacketP, PortP) && (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET)) { - /* - ** MAGIC! ( Basically, handshake the RX buffer, so that - ** the RTAs upstream can be re-enabled. ) - */ - rio_dprintk(RIO_DEBUG_INTR, "Set RX handshake bit\n"); - writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake); - } - rio_spin_unlock(&PortP->portSem); - } - } - - if (readw(&HostP->ParmMapP->tx_intr)) { - int port; - - writew(0, &HostP->ParmMapP->tx_intr); - - p->RIOTxCount++; - TxIntr++; - rio_dprintk(RIO_DEBUG_INTR, "rio: TX interrupt on host %Zd\n", HostP - p->RIOHosts); - - /* - ** Loop through every port. - ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX - ** associated ) then it is worth checking. - */ - for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) { - struct Port *PortP = p->RIOPortp[port]; - struct tty_struct *ttyP; - struct PKT __iomem *PacketP; - - /* - ** not mapped in - most of the RIOPortp[] information - ** has not been set up! - */ - if (!PortP->Mapped) { - port += 7; - continue; /* with the next port */ - } - - /* - ** If the host board isn't running, then its data structures - ** are no use to us - continue quietly. - */ - if (PortP->HostP != HostP) { - port += 7; - continue; /* with the next port */ - } - - /* - ** Let us see - is the port open? If not, then don't service it. - */ - if (!(PortP->PortState & PORT_ISOPEN)) { - continue; - } - - rio_dprintk(RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port); - /* - ** Lock the port before we begin working on it. - */ - rio_spin_lock(&PortP->portSem); - - /* - ** If we can't add anything to the transmit queue, then - ** we need do none of this processing. - */ - if (!can_add_transmit(&PacketP, PortP)) { - rio_dprintk(RIO_DEBUG_INTR, "Can't add to port, so skipping.\n"); - rio_spin_unlock(&PortP->portSem); - continue; - } - - /* - ** find corresponding tty structure. The process of mapping - ** the ports puts these here. - */ - ttyP = PortP->gs.port.tty; - /* If ttyP is NULL, the port is getting closed. Forget about it. */ - if (!ttyP) { - rio_dprintk(RIO_DEBUG_INTR, "no tty, so skipping.\n"); - rio_spin_unlock(&PortP->portSem); - continue; - } - /* - ** If there is more room available we start up the transmit - ** data process again. This can be direct I/O, if the cookmode - ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the - ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch - ** characters via the line discipline. We must always call - ** the line discipline, - ** so that user input characters can be echoed correctly. - ** - ** ++++ Update +++++ - ** With the advent of double buffering, we now see if - ** TxBufferOut-In is non-zero. If so, then we copy a packet - ** to the output place, and set it going. If this empties - ** the buffer, then we must issue a wakeup( ) on OUT. - ** If it frees space in the buffer then we must issue - ** a wakeup( ) on IN. - ** - ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we - ** have to send a WFLUSH command down the PHB, to mark the - ** end point of a WFLUSH. We also need to clear out any - ** data from the double buffer! ( note that WflushFlag is a - ** *count* of the number of WFLUSH commands outstanding! ) - ** - ** ++++ And there's more! - ** If an RTA is powered off, then on again, and rebooted, - ** whilst it has ports open, then we need to re-open the ports. - ** ( reasonable enough ). We can't do this when we spot the - ** re-boot, in interrupt time, because the queue is probably - ** full. So, when we come in here, we need to test if any - ** ports are in this condition, and re-open the port before - ** we try to send any more data to it. Now, the re-booted - ** RTA will be discarding packets from the PHB until it - ** receives this open packet, but don't worry tooo much - ** about that. The one thing that is interesting is the - ** combination of this effect and the WFLUSH effect! - */ - /* For now don't handle RTA reboots. -- REW. - Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */ - if (PortP->MagicFlags) { - if (PortP->MagicFlags & MAGIC_REBOOT) { - /* - ** well, the RTA has been rebooted, and there is room - ** on its queue to add the open packet that is required. - ** - ** The messy part of this line is trying to decide if - ** we need to call the Param function as a tty or as - ** a modem. - ** DONT USE CLOCAL AS A TEST FOR THIS! - ** - ** If we can't param the port, then move on to the - ** next port. - */ - PortP->InUse = NOT_INUSE; - - rio_spin_unlock(&PortP->portSem); - if (RIOParam(PortP, RIOC_OPEN, ((PortP->Cor2Copy & (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) == (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL) - continue; /* with next port */ - rio_spin_lock(&PortP->portSem); - PortP->MagicFlags &= ~MAGIC_REBOOT; - } - - /* - ** As mentioned above, this is a tacky hack to cope - ** with WFLUSH - */ - if (PortP->WflushFlag) { - rio_dprintk(RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n"); - - if (PortP->InUse) - rio_dprintk(RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n"); - } - - while (PortP->WflushFlag && can_add_transmit(&PacketP, PortP) && (PortP->InUse == NOT_INUSE)) { - int p; - struct PktCmd __iomem *PktCmdP; - - rio_dprintk(RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n"); - /* - ** make it look just like a WFLUSH command - */ - PktCmdP = (struct PktCmd __iomem *) &PacketP->data[0]; - - writeb(RIOC_WFLUSH, &PktCmdP->Command); - - p = PortP->HostPort % (u16) PORTS_PER_RTA; - - /* - ** If second block of ports for 16 port RTA, add 8 - ** to index 8-15. - */ - if (PortP->SecondBlock) - p += PORTS_PER_RTA; - - writeb(p, &PktCmdP->PhbNum); - - /* - ** to make debuggery easier - */ - writeb('W', &PacketP->data[2]); - writeb('F', &PacketP->data[3]); - writeb('L', &PacketP->data[4]); - writeb('U', &PacketP->data[5]); - writeb('S', &PacketP->data[6]); - writeb('H', &PacketP->data[7]); - writeb(' ', &PacketP->data[8]); - writeb('0' + PortP->WflushFlag, &PacketP->data[9]); - writeb(' ', &PacketP->data[10]); - writeb(' ', &PacketP->data[11]); - writeb('\0', &PacketP->data[12]); - - /* - ** its two bytes long! - */ - writeb(PKT_CMD_BIT | 2, &PacketP->len); - - /* - ** queue it! - */ - if (!(PortP->State & RIO_DELETED)) { - add_transmit(PortP); - /* - ** Count chars tx'd for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += 2; - } - - if (--(PortP->WflushFlag) == 0) { - PortP->MagicFlags &= ~MAGIC_FLUSH; - } - - rio_dprintk(RIO_DEBUG_INTR, "Wflush count now stands at %d\n", PortP->WflushFlag); - } - if (PortP->MagicFlags & MORE_OUTPUT_EYGOR) { - if (PortP->MagicFlags & MAGIC_FLUSH) { - PortP->MagicFlags |= MORE_OUTPUT_EYGOR; - } else { - if (!can_add_transmit(&PacketP, PortP)) { - rio_spin_unlock(&PortP->portSem); - continue; - } - rio_spin_unlock(&PortP->portSem); - RIOTxEnable((char *) PortP); - rio_spin_lock(&PortP->portSem); - PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR; - } - } - } - - - /* - ** If we can't add anything to the transmit queue, then - ** we need do none of the remaining processing. - */ - if (!can_add_transmit(&PacketP, PortP)) { - rio_spin_unlock(&PortP->portSem); - continue; - } - - rio_spin_unlock(&PortP->portSem); - RIOTxEnable((char *) PortP); - } - } -} - -/* -** Routine for handling received data for tty drivers -*/ -static void RIOReceive(struct rio_info *p, struct Port *PortP) -{ - struct tty_struct *TtyP; - unsigned short transCount; - struct PKT __iomem *PacketP; - register unsigned int DataCnt; - unsigned char __iomem *ptr; - unsigned char *buf; - int copied = 0; - - static int intCount, RxIntCnt; - - /* - ** The receive data process is to remove packets from the - ** PHB until there aren't any more or the current cblock - ** is full. When this occurs, there will be some left over - ** data in the packet, that we must do something with. - ** As we haven't unhooked the packet from the read list - ** yet, we can just leave the packet there, having first - ** made a note of how far we got. This means that we need - ** a pointer per port saying where we start taking the - ** data from - this will normally be zero, but when we - ** run out of space it will be set to the offset of the - ** next byte to copy from the packet data area. The packet - ** length field is decremented by the number of bytes that - ** we successfully removed from the packet. When this reaches - ** zero, we reset the offset pointer to be zero, and free - ** the packet from the front of the queue. - */ - - intCount++; - - TtyP = PortP->gs.port.tty; - if (!TtyP) { - rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: tty is null. \n"); - return; - } - - if (PortP->State & RIO_THROTTLE_RX) { - rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n"); - return; - } - - if (PortP->State & RIO_DELETED) { - while (can_remove_receive(&PacketP, PortP)) { - remove_receive(PortP); - put_free_end(PortP->HostP, PacketP); - } - } else { - /* - ** loop, just so long as: - ** i ) there's some data ( i.e. can_remove_receive ) - ** ii ) we haven't been blocked - ** iii ) there's somewhere to put the data - ** iv ) we haven't outstayed our welcome - */ - transCount = 1; - while (can_remove_receive(&PacketP, PortP) - && transCount) { - RxIntCnt++; - - /* - ** check that it is not a command! - */ - if (readb(&PacketP->len) & PKT_CMD_BIT) { - rio_dprintk(RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n"); - /* rio_dprint(RIO_DEBUG_INTR, (" sysport = %d\n", p->RIOPortp->PortNum)); */ - rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", readb(&PacketP->dest_unit)); - rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", readb(&PacketP->dest_port)); - rio_dprintk(RIO_DEBUG_INTR, " src_unit = %d\n", readb(&PacketP->src_unit)); - rio_dprintk(RIO_DEBUG_INTR, " src_port = %d\n", readb(&PacketP->src_port)); - rio_dprintk(RIO_DEBUG_INTR, " len = %d\n", readb(&PacketP->len)); - rio_dprintk(RIO_DEBUG_INTR, " control = %d\n", readb(&PacketP->control)); - rio_dprintk(RIO_DEBUG_INTR, " csum = %d\n", readw(&PacketP->csum)); - rio_dprintk(RIO_DEBUG_INTR, " data bytes: "); - for (DataCnt = 0; DataCnt < PKT_MAX_DATA_LEN; DataCnt++) - rio_dprintk(RIO_DEBUG_INTR, "%d\n", readb(&PacketP->data[DataCnt])); - remove_receive(PortP); - put_free_end(PortP->HostP, PacketP); - continue; /* with next packet */ - } - - /* - ** How many characters can we move 'upstream' ? - ** - ** Determine the minimum of the amount of data - ** available and the amount of space in which to - ** put it. - ** - ** 1. Get the packet length by masking 'len' - ** for only the length bits. - ** 2. Available space is [buffer size] - [space used] - ** - ** Transfer count is the minimum of packet length - ** and available space. - */ - - transCount = tty_buffer_request_room(TtyP, readb(&PacketP->len) & PKT_LEN_MASK); - rio_dprintk(RIO_DEBUG_REC, "port %d: Copy %d bytes\n", PortP->PortNum, transCount); - /* - ** To use the following 'kkprintfs' for debugging - change the '#undef' - ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the - ** driver). - */ - ptr = (unsigned char __iomem *) PacketP->data + PortP->RxDataStart; - - tty_prepare_flip_string(TtyP, &buf, transCount); - rio_memcpy_fromio(buf, ptr, transCount); - PortP->RxDataStart += transCount; - writeb(readb(&PacketP->len)-transCount, &PacketP->len); - copied += transCount; - - - - if (readb(&PacketP->len) == 0) { - /* - ** If we have emptied the packet, then we can - ** free it, and reset the start pointer for - ** the next packet. - */ - remove_receive(PortP); - put_free_end(PortP->HostP, PacketP); - PortP->RxDataStart = 0; - } - } - } - if (copied) { - rio_dprintk(RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied); - tty_flip_buffer_push(TtyP); - } - - return; -} - diff --git a/drivers/char/rio/rioioctl.h b/drivers/char/rio/rioioctl.h deleted file mode 100644 index e8af5b3..0000000 --- a/drivers/char/rio/rioioctl.h +++ /dev/null @@ -1,57 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioioctl.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:13 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)rioioctl.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rioioctl_h__ -#define __rioioctl_h__ - -/* -** RIO device driver - user ioctls and associated structures. -*/ - -struct portStats { - int port; - int gather; - unsigned long txchars; - unsigned long rxchars; - unsigned long opens; - unsigned long closes; - unsigned long ioctls; -}; - -#define RIOC ('R'<<8)|('i'<<16)|('o'<<24) - -#define RIO_QUICK_CHECK (RIOC | 105) -#define RIO_GATHER_PORT_STATS (RIOC | 193) -#define RIO_RESET_PORT_STATS (RIOC | 194) -#define RIO_GET_PORT_STATS (RIOC | 195) - -#endif /* __rioioctl_h__ */ diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c deleted file mode 100644 index 6415f3f..0000000 --- a/drivers/char/rio/rioparam.c +++ /dev/null @@ -1,663 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioparam.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:45 -** Retrieved : 11/6/98 10:33:50 -** -** ident @(#)rioparam.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - -#include <linux/termios.h> -#include <linux/serial.h> - -#include <linux/generic_serial.h> - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" - - - -/* -** The Scam, based on email from jeremyr@bugs.specialix.co.uk.... -** -** To send a command on a particular port, you put a packet with the -** command bit set onto the port. The command bit is in the len field, -** and gets ORed in with the actual byte count. -** -** When you send a packet with the command bit set the first -** data byte (data[0]) is interpreted as the command to execute. -** It also governs what data structure overlay should accompany the packet. -** Commands are defined in cirrus/cirrus.h -** -** If you want the command to pre-emt data already on the queue for the -** port, set the pre-emptive bit in conjunction with the command bit. -** It is not defined what will happen if you set the preemptive bit -** on a packet that is NOT a command. -** -** Pre-emptive commands should be queued at the head of the queue using -** add_start(), whereas normal commands and data are enqueued using -** add_end(). -** -** Most commands do not use the remaining bytes in the data array. The -** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and -** OPEN are currently analogous). With these three commands the following -** 11 data bytes are all used to pass config information such as baud rate etc. -** The fields are also defined in cirrus.h. Some contain straightforward -** information such as the transmit XON character. Two contain the transmit and -** receive baud rates respectively. For most baud rates there is a direct -** mapping between the rates defined in <sys/termio.h> and the byte in the -** packet. There are additional (non UNIX-standard) rates defined in -** /u/dos/rio/cirrus/h/brates.h. -** -** The rest of the data fields contain approximations to the Cirrus registers -** that are used to program number of bits etc. Each registers bit fields is -** defined in cirrus.h. -** -** NB. Only use those bits that are defined as being driver specific -** or common to the RTA and the driver. -** -** All commands going from RTA->Host will be dealt with by the Host code - you -** will never see them. As with the SI there will be three fields to look out -** for in each phb (not yet defined - needs defining a.s.a.p). -** -** modem_status - current state of handshake pins. -** -** port_status - current port status - equivalent to hi_stat for SI, indicates -** if port is IDLE_OPEN, IDLE_CLOSED etc. -** -** break_status - bit X set if break has been received. -** -** Happy hacking. -** -*/ - -/* -** RIOParam is used to open or configure a port. You pass it a PortP, -** which will have a tty struct attached to it. You also pass a command, -** either OPEN or CONFIG. The port's setup is taken from the t_ fields -** of the tty struct inside the PortP, and the port is either opened -** or re-configured. You must also tell RIOParam if the device is a modem -** device or not (i.e. top bit of minor number set or clear - take special -** care when deciding on this!). -** RIOParam neither flushes nor waits for drain, and is NOT preemptive. -** -** RIOParam assumes it will be called at splrio(), and also assumes -** that CookMode is set correctly in the port structure. -** -** NB. for MPX -** tty lock must NOT have been previously acquired. -*/ -int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag) -{ - struct tty_struct *TtyP; - int retval; - struct phb_param __iomem *phb_param_ptr; - struct PKT __iomem *PacketP; - int res; - u8 Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0; - u8 TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0; - u8 LNext = 0, TxBaud = 0, RxBaud = 0; - int retries = 0xff; - unsigned long flags; - - func_enter(); - - TtyP = PortP->gs.port.tty; - - rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP); - - if (!TtyP) { - rio_dprintk(RIO_DEBUG_PARAM, "Can't call rioparam with null tty.\n"); - - func_exit(); - - return RIO_FAIL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - - if (cmd == RIOC_OPEN) { - /* - ** If the port is set to store or lock the parameters, and it is - ** paramed with OPEN, we want to restore the saved port termio, but - ** only if StoredTermio has been saved, i.e. NOT 1st open after reboot. - */ - } - - /* - ** wait for space - */ - while (!(res = can_add_transmit(&PacketP, PortP)) || (PortP->InUse != NOT_INUSE)) { - if (retries-- <= 0) { - break; - } - if (PortP->InUse != NOT_INUSE) { - rio_dprintk(RIO_DEBUG_PARAM, "Port IN_USE for pre-emptive command\n"); - } - - if (!res) { - rio_dprintk(RIO_DEBUG_PARAM, "Port has no space on transmit queue\n"); - } - - if (SleepFlag != OK_TO_SLEEP) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - - return RIO_FAIL; - } - - rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - retval = RIODelay(PortP, HUNDRED_MS); - rio_spin_lock_irqsave(&PortP->portSem, flags); - if (retval == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - return -EINTR; - } - if (PortP->State & RIO_DELETED) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - return 0; - } - } - - if (!res) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - - return RIO_FAIL; - } - - rio_dprintk(RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n", res); - rio_dprintk(RIO_DEBUG_PARAM, "Packet is %p\n", PacketP); - - phb_param_ptr = (struct phb_param __iomem *) PacketP->data; - - - switch (TtyP->termios->c_cflag & CSIZE) { - case CS5: - { - rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n"); - Cor1 |= RIOC_COR1_5BITS; - break; - } - case CS6: - { - rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n"); - Cor1 |= RIOC_COR1_6BITS; - break; - } - case CS7: - { - rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n"); - Cor1 |= RIOC_COR1_7BITS; - break; - } - case CS8: - { - rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n"); - Cor1 |= RIOC_COR1_8BITS; - break; - } - } - - if (TtyP->termios->c_cflag & CSTOPB) { - rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n"); - Cor1 |= RIOC_COR1_2STOP; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n"); - Cor1 |= RIOC_COR1_1STOP; - } - - if (TtyP->termios->c_cflag & PARENB) { - rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n"); - Cor1 |= RIOC_COR1_NORMAL; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n"); - Cor1 |= RIOC_COR1_NOP; - } - if (TtyP->termios->c_cflag & PARODD) { - rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n"); - Cor1 |= RIOC_COR1_ODD; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n"); - Cor1 |= RIOC_COR1_EVEN; - } - - /* - ** COR 2 - */ - if (TtyP->termios->c_iflag & IXON) { - rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n"); - Cor2 |= RIOC_COR2_IXON; - } else { - if (PortP->Config & RIO_IXON) { - rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n"); - Cor2 |= RIOC_COR2_IXON; - } else - rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n"); - } - - if (TtyP->termios->c_iflag & IXANY) { - if (PortP->Config & RIO_IXANY) { - rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n"); - Cor2 |= RIOC_COR2_IXANY; - } else - rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n"); - } - - if (TtyP->termios->c_iflag & IXOFF) { - rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n"); - Cor2 |= RIOC_COR2_IXOFF; - } - - if (TtyP->termios->c_cflag & HUPCL) { - rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n"); - Cor2 |= RIOC_COR2_HUPCL; - } - - if (C_CRTSCTS(TtyP)) { - rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n"); - Cor2 |= RIOC_COR2_CTSFLOW; - Cor2 |= RIOC_COR2_RTSFLOW; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n"); - Cor2 &= ~RIOC_COR2_CTSFLOW; - Cor2 &= ~RIOC_COR2_RTSFLOW; - } - - - if (TtyP->termios->c_cflag & CLOCAL) { - rio_dprintk(RIO_DEBUG_PARAM, "Local line\n"); - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Possible Modem line\n"); - } - - /* - ** COR 4 (there is no COR 3) - */ - if (TtyP->termios->c_iflag & IGNBRK) { - rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n"); - Cor4 |= RIOC_COR4_IGNBRK; - } - if (!(TtyP->termios->c_iflag & BRKINT)) { - rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n"); - Cor4 |= RIOC_COR4_NBRKINT; - } else { - rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on break condition\n"); - } - - if (TtyP->termios->c_iflag & INLCR) { - rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n"); - Cor4 |= RIOC_COR4_INLCR; - } - - if (TtyP->termios->c_iflag & IGNCR) { - rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n"); - Cor4 |= RIOC_COR4_IGNCR; - } - - if (TtyP->termios->c_iflag & ICRNL) { - rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n"); - Cor4 |= RIOC_COR4_ICRNL; - } - if (TtyP->termios->c_iflag & IGNPAR) { - rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n"); - Cor4 |= RIOC_COR4_IGNPAR; - } - if (TtyP->termios->c_iflag & PARMRK) { - rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n"); - Cor4 |= RIOC_COR4_PARMRK; - } - - /* - ** Set the RAISEMOD flag to ensure that the modem lines are raised - ** on reception of a config packet. - ** The download code handles the zero baud condition. - */ - Cor4 |= RIOC_COR4_RAISEMOD; - - /* - ** COR 5 - */ - - Cor5 = RIOC_COR5_CMOE; - - /* - ** Set to monitor tbusy/tstop (or not). - */ - - if (PortP->MonitorTstate) - Cor5 |= RIOC_COR5_TSTATE_ON; - else - Cor5 |= RIOC_COR5_TSTATE_OFF; - - /* - ** Could set LNE here if you wanted LNext processing. SVR4 will use it. - */ - if (TtyP->termios->c_iflag & ISTRIP) { - rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n"); - if (!(PortP->State & RIO_TRIAD_MODE)) { - Cor5 |= RIOC_COR5_ISTRIP; - } - } - - if (TtyP->termios->c_oflag & ONLCR) { - rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n"); - if (PortP->CookMode == COOK_MEDIUM) - Cor5 |= RIOC_COR5_ONLCR; - } - if (TtyP->termios->c_oflag & OCRNL) { - rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n"); - if (PortP->CookMode == COOK_MEDIUM) - Cor5 |= RIOC_COR5_OCRNL; - } - if ((TtyP->termios->c_oflag & TABDLY) == TAB3) { - rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n"); - if (PortP->CookMode == COOK_MEDIUM) - Cor5 |= RIOC_COR5_TAB3; - } - - /* - ** Flow control bytes. - */ - TxXon = TtyP->termios->c_cc[VSTART]; - TxXoff = TtyP->termios->c_cc[VSTOP]; - RxXon = TtyP->termios->c_cc[VSTART]; - RxXoff = TtyP->termios->c_cc[VSTOP]; - /* - ** LNEXT byte - */ - LNext = 0; - - /* - ** Baud rate bytes - */ - rio_dprintk(RIO_DEBUG_PARAM, "Mapping of rx/tx baud %x (%x)\n", TtyP->termios->c_cflag, CBAUD); - - switch (TtyP->termios->c_cflag & CBAUD) { -#define e(b) case B ## b : RxBaud = TxBaud = RIO_B ## b ;break - e(50); - e(75); - e(110); - e(134); - e(150); - e(200); - e(300); - e(600); - e(1200); - e(1800); - e(2400); - e(4800); - e(9600); - e(19200); - e(38400); - e(57600); - e(115200); /* e(230400);e(460800); e(921600); */ - } - - rio_dprintk(RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud); - - - /* - ** Leftovers - */ - if (TtyP->termios->c_cflag & CREAD) - rio_dprintk(RIO_DEBUG_PARAM, "Enable receiver\n"); -#ifdef RCV1EN - if (TtyP->termios->c_cflag & RCV1EN) - rio_dprintk(RIO_DEBUG_PARAM, "RCV1EN (?)\n"); -#endif -#ifdef XMT1EN - if (TtyP->termios->c_cflag & XMT1EN) - rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n"); -#endif - if (TtyP->termios->c_lflag & ISIG) - rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n"); - if (TtyP->termios->c_lflag & ICANON) - rio_dprintk(RIO_DEBUG_PARAM, "Canonical input: erase and kill enabled\n"); - if (TtyP->termios->c_lflag & XCASE) - rio_dprintk(RIO_DEBUG_PARAM, "Canonical upper/lower presentation\n"); - if (TtyP->termios->c_lflag & ECHO) - rio_dprintk(RIO_DEBUG_PARAM, "Enable input echo\n"); - if (TtyP->termios->c_lflag & ECHOE) - rio_dprintk(RIO_DEBUG_PARAM, "Enable echo erase\n"); - if (TtyP->termios->c_lflag & ECHOK) - rio_dprintk(RIO_DEBUG_PARAM, "Enable echo kill\n"); - if (TtyP->termios->c_lflag & ECHONL) - rio_dprintk(RIO_DEBUG_PARAM, "Enable echo newline\n"); - if (TtyP->termios->c_lflag & NOFLSH) - rio_dprintk(RIO_DEBUG_PARAM, "Disable flush after interrupt or quit\n"); -#ifdef TOSTOP - if (TtyP->termios->c_lflag & TOSTOP) - rio_dprintk(RIO_DEBUG_PARAM, "Send SIGTTOU for background output\n"); -#endif -#ifdef XCLUDE - if (TtyP->termios->c_lflag & XCLUDE) - rio_dprintk(RIO_DEBUG_PARAM, "Exclusive use of this line\n"); -#endif - if (TtyP->termios->c_iflag & IUCLC) - rio_dprintk(RIO_DEBUG_PARAM, "Map uppercase to lowercase on input\n"); - if (TtyP->termios->c_oflag & OPOST) - rio_dprintk(RIO_DEBUG_PARAM, "Enable output post-processing\n"); - if (TtyP->termios->c_oflag & OLCUC) - rio_dprintk(RIO_DEBUG_PARAM, "Map lowercase to uppercase on output\n"); - if (TtyP->termios->c_oflag & ONOCR) - rio_dprintk(RIO_DEBUG_PARAM, "No carriage return output at column 0\n"); - if (TtyP->termios->c_oflag & ONLRET) - rio_dprintk(RIO_DEBUG_PARAM, "Newline performs carriage return function\n"); - if (TtyP->termios->c_oflag & OFILL) - rio_dprintk(RIO_DEBUG_PARAM, "Use fill characters for delay\n"); - if (TtyP->termios->c_oflag & OFDEL) - rio_dprintk(RIO_DEBUG_PARAM, "Fill character is DEL\n"); - if (TtyP->termios->c_oflag & NLDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Newline delay set\n"); - if (TtyP->termios->c_oflag & CRDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n"); - if (TtyP->termios->c_oflag & TABDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n"); - /* - ** These things are kind of useful in a later life! - */ - PortP->Cor2Copy = Cor2; - - if (PortP->State & RIO_DELETED) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - - return RIO_FAIL; - } - - /* - ** Actually write the info into the packet to be sent - */ - writeb(cmd, &phb_param_ptr->Cmd); - writeb(Cor1, &phb_param_ptr->Cor1); - writeb(Cor2, &phb_param_ptr->Cor2); - writeb(Cor4, &phb_param_ptr->Cor4); - writeb(Cor5, &phb_param_ptr->Cor5); - writeb(TxXon, &phb_param_ptr->TxXon); - writeb(RxXon, &phb_param_ptr->RxXon); - writeb(TxXoff, &phb_param_ptr->TxXoff); - writeb(RxXoff, &phb_param_ptr->RxXoff); - writeb(LNext, &phb_param_ptr->LNext); - writeb(TxBaud, &phb_param_ptr->TxBaud); - writeb(RxBaud, &phb_param_ptr->RxBaud); - - /* - ** Set the length/command field - */ - writeb(12 | PKT_CMD_BIT, &PacketP->len); - - /* - ** The packet is formed - now, whack it off - ** to its final destination: - */ - add_transmit(PortP); - /* - ** Count characters transmitted for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += 12; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - rio_dprintk(RIO_DEBUG_PARAM, "add_transmit returned.\n"); - /* - ** job done. - */ - func_exit(); - - return 0; -} - - -/* -** We can add another packet to a transmit queue if the packet pointer pointed -** to by the TxAdd pointer has PKT_IN_USE clear in its address. -*/ -int can_add_transmit(struct PKT __iomem **PktP, struct Port *PortP) -{ - struct PKT __iomem *tp; - - *PktP = tp = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->TxAdd)); - - return !((unsigned long) tp & PKT_IN_USE); -} - -/* -** To add a packet to the queue, you set the PKT_IN_USE bit in the address, -** and then move the TxAdd pointer along one position to point to the next -** packet pointer. You must wrap the pointer from the end back to the start. -*/ -void add_transmit(struct Port *PortP) -{ - if (readw(PortP->TxAdd) & PKT_IN_USE) { - rio_dprintk(RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!"); - } - writew(readw(PortP->TxAdd) | PKT_IN_USE, PortP->TxAdd); - PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : PortP->TxAdd + 1; - writew(RIO_OFF(PortP->Caddr, PortP->TxAdd), &PortP->PhbP->tx_add); -} - -/**************************************** - * Put a packet onto the end of the - * free list - ****************************************/ -void put_free_end(struct Host *HostP, struct PKT __iomem *PktP) -{ - struct rio_free_list __iomem *tmp_pointer; - unsigned short old_end, new_end; - unsigned long flags; - - rio_spin_lock_irqsave(&HostP->HostLock, flags); - - /************************************************* - * Put a packet back onto the back of the free list - * - ************************************************/ - - rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%p)\n", PktP); - - if ((old_end = readw(&HostP->ParmMapP->free_list_end)) != TPNULL) { - new_end = RIO_OFF(HostP->Caddr, PktP); - tmp_pointer = (struct rio_free_list __iomem *) RIO_PTR(HostP->Caddr, old_end); - writew(new_end, &tmp_pointer->next); - writew(old_end, &((struct rio_free_list __iomem *) PktP)->prev); - writew(TPNULL, &((struct rio_free_list __iomem *) PktP)->next); - writew(new_end, &HostP->ParmMapP->free_list_end); - } else { /* First packet on the free list this should never happen! */ - rio_dprintk(RIO_DEBUG_PFE, "put_free_end(): This should never happen\n"); - writew(RIO_OFF(HostP->Caddr, PktP), &HostP->ParmMapP->free_list_end); - tmp_pointer = (struct rio_free_list __iomem *) PktP; - writew(TPNULL, &tmp_pointer->prev); - writew(TPNULL, &tmp_pointer->next); - } - rio_dprintk(RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock); - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); -} - -/* -** can_remove_receive(PktP,P) returns non-zero if PKT_IN_USE is set -** for the next packet on the queue. It will also set PktP to point to the -** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear, -** then can_remove_receive() returns 0. -*/ -int can_remove_receive(struct PKT __iomem **PktP, struct Port *PortP) -{ - if (readw(PortP->RxRemove) & PKT_IN_USE) { - *PktP = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->RxRemove) & ~PKT_IN_USE); - return 1; - } - return 0; -} - -/* -** To remove a packet from the receive queue you clear its PKT_IN_USE bit, -** and then bump the pointers. Once the pointers get to the end, they must -** be wrapped back to the start. -*/ -void remove_receive(struct Port *PortP) -{ - writew(readw(PortP->RxRemove) & ~PKT_IN_USE, PortP->RxRemove); - PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : PortP->RxRemove + 1; - writew(RIO_OFF(PortP->Caddr, PortP->RxRemove), &PortP->PhbP->rx_remove); -} diff --git a/drivers/char/rio/rioroute.c b/drivers/char/rio/rioroute.c deleted file mode 100644 index f9b936a..0000000 --- a/drivers/char/rio/rioroute.c +++ /dev/null @@ -1,1039 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : rioroute.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:46 -** Retrieved : 11/6/98 10:33:50 -** -** ident @(#)rioroute.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#include <linux/module.h> -#include <linux/errno.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - -#include <linux/termios.h> -#include <linux/serial.h> - -#include <linux/generic_serial.h> - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" - -static int RIOCheckIsolated(struct rio_info *, struct Host *, unsigned int); -static int RIOIsolate(struct rio_info *, struct Host *, unsigned int); -static int RIOCheck(struct Host *, unsigned int); -static void RIOConCon(struct rio_info *, struct Host *, unsigned int, unsigned int, unsigned int, unsigned int, int); - - -/* -** Incoming on the ROUTE_RUP -** I wrote this while I was tired. Forgive me. -*/ -int RIORouteRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem * PacketP) -{ - struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data; - struct PktCmd_M *PktReplyP; - struct CmdBlk *CmdBlkP; - struct Port *PortP; - struct Map *MapP; - struct Top *TopP; - int ThisLink, ThisLinkMin, ThisLinkMax; - int port; - int Mod, Mod1, Mod2; - unsigned short RtaType; - unsigned int RtaUniq; - unsigned int ThisUnit, ThisUnit2; /* 2 ids to accommodate 16 port RTA */ - unsigned int OldUnit, NewUnit, OldLink, NewLink; - char *MyType, *MyName; - int Lies; - unsigned long flags; - - /* - ** Is this unit telling us it's current link topology? - */ - if (readb(&PktCmdP->Command) == ROUTE_TOPOLOGY) { - MapP = HostP->Mapping; - - /* - ** The packet can be sent either by the host or by an RTA. - ** If it comes from the host, then we need to fill in the - ** Topology array in the host structure. If it came in - ** from an RTA then we need to fill in the Mapping structure's - ** Topology array for the unit. - */ - if (Rup >= (unsigned short) MAX_RUP) { - ThisUnit = HOST_ID; - TopP = HostP->Topology; - MyType = "Host"; - MyName = HostP->Name; - ThisLinkMin = ThisLinkMax = Rup - MAX_RUP; - } else { - ThisUnit = Rup + 1; - TopP = HostP->Mapping[Rup].Topology; - MyType = "RTA"; - MyName = HostP->Mapping[Rup].Name; - ThisLinkMin = 0; - ThisLinkMax = LINKS_PER_UNIT - 1; - } - - /* - ** Lies will not be tolerated. - ** If any pair of links claim to be connected to the same - ** place, then ignore this packet completely. - */ - Lies = 0; - for (ThisLink = ThisLinkMin + 1; ThisLink <= ThisLinkMax; ThisLink++) { - /* - ** it won't lie about network interconnect, total disconnects - ** and no-IDs. (or at least, it doesn't *matter* if it does) - */ - if (readb(&PktCmdP->RouteTopology[ThisLink].Unit) > (unsigned short) MAX_RUP) - continue; - - for (NewLink = ThisLinkMin; NewLink < ThisLink; NewLink++) { - if ((readb(&PktCmdP->RouteTopology[ThisLink].Unit) == readb(&PktCmdP->RouteTopology[NewLink].Unit)) && (readb(&PktCmdP->RouteTopology[ThisLink].Link) == readb(&PktCmdP->RouteTopology[NewLink].Link))) { - Lies++; - } - } - } - - if (Lies) { - rio_dprintk(RIO_DEBUG_ROUTE, "LIES! DAMN LIES! %d LIES!\n", Lies); - rio_dprintk(RIO_DEBUG_ROUTE, "%d:%c %d:%c %d:%c %d:%c\n", - readb(&PktCmdP->RouteTopology[0].Unit), - 'A' + readb(&PktCmdP->RouteTopology[0].Link), - readb(&PktCmdP->RouteTopology[1].Unit), - 'A' + readb(&PktCmdP->RouteTopology[1].Link), readb(&PktCmdP->RouteTopology[2].Unit), 'A' + readb(&PktCmdP->RouteTopology[2].Link), readb(&PktCmdP->RouteTopology[3].Unit), 'A' + readb(&PktCmdP->RouteTopology[3].Link)); - return 1; - } - - /* - ** now, process each link. - */ - for (ThisLink = ThisLinkMin; ThisLink <= ThisLinkMax; ThisLink++) { - /* - ** this is what it was connected to - */ - OldUnit = TopP[ThisLink].Unit; - OldLink = TopP[ThisLink].Link; - - /* - ** this is what it is now connected to - */ - NewUnit = readb(&PktCmdP->RouteTopology[ThisLink].Unit); - NewLink = readb(&PktCmdP->RouteTopology[ThisLink].Link); - - if (OldUnit != NewUnit || OldLink != NewLink) { - /* - ** something has changed! - */ - - if (NewUnit > MAX_RUP && NewUnit != ROUTE_DISCONNECT && NewUnit != ROUTE_NO_ID && NewUnit != ROUTE_INTERCONNECT) { - rio_dprintk(RIO_DEBUG_ROUTE, "I have a link from %s %s to unit %d:%d - I don't like it.\n", MyType, MyName, NewUnit, NewLink); - } else { - /* - ** put the new values in - */ - TopP[ThisLink].Unit = NewUnit; - TopP[ThisLink].Link = NewLink; - - RIOSetChange(p); - - if (OldUnit <= MAX_RUP) { - /* - ** If something has become bust, then re-enable them messages - */ - if (!p->RIONoMessage) - RIOConCon(p, HostP, ThisUnit, ThisLink, OldUnit, OldLink, DISCONNECT); - } - - if ((NewUnit <= MAX_RUP) && !p->RIONoMessage) - RIOConCon(p, HostP, ThisUnit, ThisLink, NewUnit, NewLink, CONNECT); - - if (NewUnit == ROUTE_NO_ID) - rio_dprintk(RIO_DEBUG_ROUTE, "%s %s (%c) is connected to an unconfigured unit.\n", MyType, MyName, 'A' + ThisLink); - - if (NewUnit == ROUTE_INTERCONNECT) { - if (!p->RIONoMessage) - printk(KERN_DEBUG "rio: %s '%s' (%c) is connected to another network.\n", MyType, MyName, 'A' + ThisLink); - } - - /* - ** perform an update for 'the other end', so that these messages - ** only appears once. Only disconnect the other end if it is pointing - ** at us! - */ - if (OldUnit == HOST_ID) { - if (HostP->Topology[OldLink].Unit == ThisUnit && HostP->Topology[OldLink].Link == ThisLink) { - rio_dprintk(RIO_DEBUG_ROUTE, "SETTING HOST (%c) TO DISCONNECTED!\n", OldLink + 'A'); - HostP->Topology[OldLink].Unit = ROUTE_DISCONNECT; - HostP->Topology[OldLink].Link = NO_LINK; - } else { - rio_dprintk(RIO_DEBUG_ROUTE, "HOST(%c) WAS NOT CONNECTED TO %s (%c)!\n", OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A'); - } - } else if (OldUnit <= MAX_RUP) { - if (HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit == ThisUnit && HostP->Mapping[OldUnit - 1].Topology[OldLink].Link == ThisLink) { - rio_dprintk(RIO_DEBUG_ROUTE, "SETTING RTA %s (%c) TO DISCONNECTED!\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A'); - HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit = ROUTE_DISCONNECT; - HostP->Mapping[OldUnit - 1].Topology[OldLink].Link = NO_LINK; - } else { - rio_dprintk(RIO_DEBUG_ROUTE, "RTA %s (%c) WAS NOT CONNECTED TO %s (%c)\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A'); - } - } - if (NewUnit == HOST_ID) { - rio_dprintk(RIO_DEBUG_ROUTE, "MARKING HOST (%c) CONNECTED TO %s (%c)\n", NewLink + 'A', MyName, ThisLink + 'A'); - HostP->Topology[NewLink].Unit = ThisUnit; - HostP->Topology[NewLink].Link = ThisLink; - } else if (NewUnit <= MAX_RUP) { - rio_dprintk(RIO_DEBUG_ROUTE, "MARKING RTA %s (%c) CONNECTED TO %s (%c)\n", HostP->Mapping[NewUnit - 1].Name, NewLink + 'A', MyName, ThisLink + 'A'); - HostP->Mapping[NewUnit - 1].Topology[NewLink].Unit = ThisUnit; - HostP->Mapping[NewUnit - 1].Topology[NewLink].Link = ThisLink; - } - } - RIOSetChange(p); - RIOCheckIsolated(p, HostP, OldUnit); - } - } - return 1; - } - - /* - ** The only other command we recognise is a route_request command - */ - if (readb(&PktCmdP->Command) != ROUTE_REQUEST) { - rio_dprintk(RIO_DEBUG_ROUTE, "Unknown command %d received on rup %d host %p ROUTE_RUP\n", readb(&PktCmdP->Command), Rup, HostP); - return 1; - } - - RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24); - - /* - ** Determine if 8 or 16 port RTA - */ - RtaType = GetUnitType(RtaUniq); - - rio_dprintk(RIO_DEBUG_ROUTE, "Received a request for an ID for serial number %x\n", RtaUniq); - - Mod = readb(&PktCmdP->ModuleTypes); - Mod1 = LONYBLE(Mod); - if (RtaType == TYPE_RTA16) { - /* - ** Only one ident is set for a 16 port RTA. To make compatible - ** with 8 port, set 2nd ident in Mod2 to the same as Mod1. - */ - Mod2 = Mod1; - rio_dprintk(RIO_DEBUG_ROUTE, "Backplane type is %s (all ports)\n", p->RIOModuleTypes[Mod1].Name); - } else { - Mod2 = HINYBLE(Mod); - rio_dprintk(RIO_DEBUG_ROUTE, "Module types are %s (ports 0-3) and %s (ports 4-7)\n", p->RIOModuleTypes[Mod1].Name, p->RIOModuleTypes[Mod2].Name); - } - - /* - ** try to unhook a command block from the command free list. - */ - if (!(CmdBlkP = RIOGetCmdBlk())) { - rio_dprintk(RIO_DEBUG_ROUTE, "No command blocks to route RTA! come back later.\n"); - return 0; - } - - /* - ** Fill in the default info on the command block - */ - CmdBlkP->Packet.dest_unit = Rup; - CmdBlkP->Packet.dest_port = ROUTE_RUP; - CmdBlkP->Packet.src_unit = HOST_ID; - CmdBlkP->Packet.src_port = ROUTE_RUP; - CmdBlkP->Packet.len = PKT_CMD_BIT | 1; - CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; - PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data; - - if (!RIOBootOk(p, HostP, RtaUniq)) { - rio_dprintk(RIO_DEBUG_ROUTE, "RTA %x tried to get an ID, but does not belong - FOAD it!\n", RtaUniq); - PktReplyP->Command = ROUTE_FOAD; - memcpy(PktReplyP->CommandText, "RT_FOAD", 7); - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; - } - - /* - ** Check to see if the RTA is configured for this host - */ - for (ThisUnit = 0; ThisUnit < MAX_RUP; ThisUnit++) { - rio_dprintk(RIO_DEBUG_ROUTE, "Entry %d Flags=%s %s UniqueNum=0x%x\n", - ThisUnit, HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE ? "Slot-In-Use" : "Not In Use", HostP->Mapping[ThisUnit].Flags & SLOT_TENTATIVE ? "Slot-Tentative" : "Not Tentative", HostP->Mapping[ThisUnit].RtaUniqueNum); - - /* - ** We have an entry for it. - */ - if ((HostP->Mapping[ThisUnit].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (HostP->Mapping[ThisUnit].RtaUniqueNum == RtaUniq)) { - if (RtaType == TYPE_RTA16) { - ThisUnit2 = HostP->Mapping[ThisUnit].ID2 - 1; - rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slots %d+%d\n", RtaUniq, ThisUnit, ThisUnit2); - } else - rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slot %d\n", RtaUniq, ThisUnit); - /* - ** If we have no knowledge of booting it, then the host has - ** been re-booted, and so we must kill the RTA, so that it - ** will be booted again (potentially with new bins) - ** and it will then re-ask for an ID, which we will service. - */ - if ((HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) && !(HostP->Mapping[ThisUnit].Flags & RTA_BOOTED)) { - if (!(HostP->Mapping[ThisUnit].Flags & MSG_DONE)) { - if (!p->RIONoMessage) - printk(KERN_DEBUG "rio: RTA '%s' is being updated.\n", HostP->Mapping[ThisUnit].Name); - HostP->Mapping[ThisUnit].Flags |= MSG_DONE; - } - PktReplyP->Command = ROUTE_FOAD; - memcpy(PktReplyP->CommandText, "RT_FOAD", 7); - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; - } - - /* - ** Send the ID (entry) to this RTA. The ID number is implicit as - ** the offset into the table. It is worth noting at this stage - ** that offset zero in the table contains the entries for the - ** RTA with ID 1!!!! - */ - PktReplyP->Command = ROUTE_ALLOCATE; - PktReplyP->IDNum = ThisUnit + 1; - if (RtaType == TYPE_RTA16) { - if (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) - /* - ** Adjust the phb and tx pkt dest_units for 2nd block of 8 - ** only if the RTA has ports associated (SLOT_IN_USE) - */ - RIOFixPhbs(p, HostP, ThisUnit2); - PktReplyP->IDNum2 = ThisUnit2 + 1; - rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated IDs %d+%d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum, PktReplyP->IDNum2); - } else { - PktReplyP->IDNum2 = ROUTE_NO_ID; - rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated ID %d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum); - } - memcpy(PktReplyP->CommandText, "RT_ALLOCAT", 10); - - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - - /* - ** If this is a freshly booted RTA, then we need to re-open - ** the ports, if any where open, so that data may once more - ** flow around the system! - */ - if ((HostP->Mapping[ThisUnit].Flags & RTA_NEWBOOT) && (HostP->Mapping[ThisUnit].SysPort != NO_PORT)) { - /* - ** look at the ports associated with this beast and - ** see if any where open. If they was, then re-open - ** them, using the info from the tty flags. - */ - for (port = 0; port < PORTS_PER_RTA; port++) { - PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]; - if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { - rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n"); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->MagicFlags |= MAGIC_REBOOT; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - } - if (RtaType == TYPE_RTA16) { - for (port = 0; port < PORTS_PER_RTA; port++) { - PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]; - if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { - rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n"); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->MagicFlags |= MAGIC_REBOOT; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - } - } - } - - /* - ** keep a copy of the module types! - */ - HostP->UnixRups[ThisUnit].ModTypes = Mod; - if (RtaType == TYPE_RTA16) - HostP->UnixRups[ThisUnit2].ModTypes = Mod; - - /* - ** If either of the modules on this unit is read-only or write-only - ** or none-xprint, then we need to transfer that info over to the - ** relevant ports. - */ - if (HostP->Mapping[ThisUnit].SysPort != NO_PORT) { - for (port = 0; port < PORTS_PER_MODULE; port++) { - p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; - p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; - } - if (RtaType == TYPE_RTA16) { - for (port = 0; port < PORTS_PER_MODULE; port++) { - p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; - p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; - } - } - } - - /* - ** Job done, get on with the interrupts! - */ - return 1; - } - } - /* - ** There is no table entry for this RTA at all. - ** - ** Lets check to see if we actually booted this unit - if not, - ** then we reset it and it will go round the loop of being booted - ** we can then worry about trying to fit it into the table. - */ - for (ThisUnit = 0; ThisUnit < HostP->NumExtraBooted; ThisUnit++) - if (HostP->ExtraUnits[ThisUnit] == RtaUniq) - break; - if (ThisUnit == HostP->NumExtraBooted && ThisUnit != MAX_EXTRA_UNITS) { - /* - ** if the unit wasn't in the table, and the table wasn't full, then - ** we reset the unit, because we didn't boot it. - ** However, if the table is full, it could be that we did boot - ** this unit, and so we won't reboot it, because it isn't really - ** all that disasterous to keep the old bins in most cases. This - ** is a rather tacky feature, but we are on the edge of reallity - ** here, because the implication is that someone has connected - ** 16+MAX_EXTRA_UNITS onto one host. - */ - static int UnknownMesgDone = 0; - - if (!UnknownMesgDone) { - if (!p->RIONoMessage) - printk(KERN_DEBUG "rio: One or more unknown RTAs are being updated.\n"); - UnknownMesgDone = 1; - } - - PktReplyP->Command = ROUTE_FOAD; - memcpy(PktReplyP->CommandText, "RT_FOAD", 7); - } else { - /* - ** we did boot it (as an extra), and there may now be a table - ** slot free (because of a delete), so we will try to make - ** a tentative entry for it, so that the configurator can see it - ** and fill in the details for us. - */ - if (RtaType == TYPE_RTA16) { - if (RIOFindFreeID(p, HostP, &ThisUnit, &ThisUnit2) == 0) { - RIODefaultName(p, HostP, ThisUnit); - rio_fill_host_slot(ThisUnit, ThisUnit2, RtaUniq, HostP); - } - } else { - if (RIOFindFreeID(p, HostP, &ThisUnit, NULL) == 0) { - RIODefaultName(p, HostP, ThisUnit); - rio_fill_host_slot(ThisUnit, 0, RtaUniq, HostP); - } - } - PktReplyP->Command = ROUTE_USED; - memcpy(PktReplyP->CommandText, "RT_USED", 7); - } - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return 1; -} - - -void RIOFixPhbs(struct rio_info *p, struct Host *HostP, unsigned int unit) -{ - unsigned short link, port; - struct Port *PortP; - unsigned long flags; - int PortN = HostP->Mapping[unit].SysPort; - - rio_dprintk(RIO_DEBUG_ROUTE, "RIOFixPhbs unit %d sysport %d\n", unit, PortN); - - if (PortN != -1) { - unsigned short dest_unit = HostP->Mapping[unit].ID2; - - /* - ** Get the link number used for the 1st 8 phbs on this unit. - */ - PortP = p->RIOPortp[HostP->Mapping[dest_unit - 1].SysPort]; - - link = readw(&PortP->PhbP->link); - - for (port = 0; port < PORTS_PER_RTA; port++, PortN++) { - unsigned short dest_port = port + 8; - u16 __iomem *TxPktP; - struct PKT __iomem *Pkt; - - PortP = p->RIOPortp[PortN]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - /* - ** If RTA is not powered on, the tx packets will be - ** unset, so go no further. - */ - if (!PortP->TxStart) { - rio_dprintk(RIO_DEBUG_ROUTE, "Tx pkts not set up yet\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - break; - } - - /* - ** For the second slot of a 16 port RTA, the driver needs to - ** sort out the phb to port mappings. The dest_unit for this - ** group of 8 phbs is set to the dest_unit of the accompanying - ** 8 port block. The dest_port of the second unit is set to - ** be in the range 8-15 (i.e. 8 is added). Thus, for a 16 port - ** RTA with IDs 5 and 6, traffic bound for port 6 of unit 6 - ** (being the second map ID) will be sent to dest_unit 5, port - ** 14. When this RTA is deleted, dest_unit for ID 6 will be - ** restored, and the dest_port will be reduced by 8. - ** Transmit packets also have a destination field which needs - ** adjusting in the same manner. - ** Note that the unit/port bytes in 'dest' are swapped. - ** We also need to adjust the phb and rup link numbers for the - ** second block of 8 ttys. - */ - for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) { - /* - ** *TxPktP is the pointer to the transmit packet on the host - ** card. This needs to be translated into a 32 bit pointer - ** so it can be accessed from the driver. - */ - Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(TxPktP)); - - /* - ** If the packet is used, reset it. - */ - Pkt = (struct PKT __iomem *) ((unsigned long) Pkt & ~PKT_IN_USE); - writeb(dest_unit, &Pkt->dest_unit); - writeb(dest_port, &Pkt->dest_port); - } - rio_dprintk(RIO_DEBUG_ROUTE, "phb dest: Old %x:%x New %x:%x\n", readw(&PortP->PhbP->destination) & 0xff, (readw(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port); - writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination); - writew(link, &PortP->PhbP->link); - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - /* - ** Now make sure the range of ports to be serviced includes - ** the 2nd 8 on this 16 port RTA. - */ - if (link > 3) - return; - if (((unit * 8) + 7) > readw(&HostP->LinkStrP[link].last_port)) { - rio_dprintk(RIO_DEBUG_ROUTE, "last port on host link %d: %d\n", link, (unit * 8) + 7); - writew((unit * 8) + 7, &HostP->LinkStrP[link].last_port); - } - } -} - -/* -** Check to see if the new disconnection has isolated this unit. -** If it has, then invalidate all its link information, and tell -** the world about it. This is done to ensure that the configurator -** only gets up-to-date information about what is going on. -*/ -static int RIOCheckIsolated(struct rio_info *p, struct Host *HostP, unsigned int UnitId) -{ - unsigned long flags; - rio_spin_lock_irqsave(&HostP->HostLock, flags); - - if (RIOCheck(HostP, UnitId)) { - rio_dprintk(RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId); - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - return (0); - } - - RIOIsolate(p, HostP, UnitId); - RIOSetChange(p); - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - return 1; -} - -/* -** Invalidate all the link interconnectivity of this unit, and of -** all the units attached to it. This will mean that the entire -** subnet will re-introduce itself. -*/ -static int RIOIsolate(struct rio_info *p, struct Host *HostP, unsigned int UnitId) -{ - unsigned int link, unit; - - UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */ - - if (UnitId >= MAX_RUP) /* dontcha just lurv unsigned maths! */ - return (0); - - if (HostP->Mapping[UnitId].Flags & BEEN_HERE) - return (0); - - HostP->Mapping[UnitId].Flags |= BEEN_HERE; - - if (p->RIOPrintDisabled == DO_PRINT) - rio_dprintk(RIO_DEBUG_ROUTE, "RIOMesgIsolated %s", HostP->Mapping[UnitId].Name); - - for (link = 0; link < LINKS_PER_UNIT; link++) { - unit = HostP->Mapping[UnitId].Topology[link].Unit; - HostP->Mapping[UnitId].Topology[link].Unit = ROUTE_DISCONNECT; - HostP->Mapping[UnitId].Topology[link].Link = NO_LINK; - RIOIsolate(p, HostP, unit); - } - HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; - return 1; -} - -static int RIOCheck(struct Host *HostP, unsigned int UnitId) -{ - unsigned char link; - -/* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */ - rio_dprintk(RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId); - - if (UnitId == HOST_ID) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is NOT isolated - it IS the host!\n", UnitId)); */ - return 1; - } - - UnitId--; - - if (UnitId >= MAX_RUP) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d - ignored.\n", UnitId)); */ - return 0; - } - - for (link = 0; link < LINKS_PER_UNIT; link++) { - if (HostP->Mapping[UnitId].Topology[link].Unit == HOST_ID) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected directly to host via link (%c).\n", - UnitId, 'A'+link)); */ - return 1; - } - } - - if (HostP->Mapping[UnitId].Flags & BEEN_HERE) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Been to Unit %d before - ignoring\n", UnitId)); */ - return 0; - } - - HostP->Mapping[UnitId].Flags |= BEEN_HERE; - - for (link = 0; link < LINKS_PER_UNIT; link++) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d check link (%c)\n", UnitId,'A'+link)); */ - if (RIOCheck(HostP, HostP->Mapping[UnitId].Topology[link].Unit)) { - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected to something that knows the host via link (%c)\n", UnitId,link+'A')); */ - HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; - return 1; - } - } - - HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; - - /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESNT KNOW THE HOST!\n", UnitId)); */ - - return 0; -} - -/* -** Returns the type of unit (host, 16/8 port RTA) -*/ - -unsigned int GetUnitType(unsigned int Uniq) -{ - switch ((Uniq >> 28) & 0xf) { - case RIO_AT: - case RIO_MCA: - case RIO_EISA: - case RIO_PCI: - rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Host\n"); - return (TYPE_HOST); - case RIO_RTA_16: - rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 16 port RTA\n"); - return (TYPE_RTA16); - case RIO_RTA: - rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 8 port RTA\n"); - return (TYPE_RTA8); - default: - rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Unrecognised\n"); - return (99); - } -} - -int RIOSetChange(struct rio_info *p) -{ - if (p->RIOQuickCheck != NOT_CHANGED) - return (0); - p->RIOQuickCheck = CHANGED; - if (p->RIOSignalProcess) { - rio_dprintk(RIO_DEBUG_ROUTE, "Send SIG-HUP"); - /* - psignal( RIOSignalProcess, SIGHUP ); - */ - } - return (0); -} - -static void RIOConCon(struct rio_info *p, - struct Host *HostP, - unsigned int FromId, - unsigned int FromLink, - unsigned int ToId, - unsigned int ToLink, - int Change) -{ - char *FromName; - char *FromType; - char *ToName; - char *ToType; - unsigned int tp; - -/* -** 15.10.1998 ARG - ESIL 0759 -** (Part) fix for port being trashed when opened whilst RTA "disconnected" -** -** What's this doing in here anyway ? -** It was causing the port to be 'unmapped' if opened whilst RTA "disconnected" -** -** 09.12.1998 ARG - ESIL 0776 - part fix -** Okay, We've found out what this was all about now ! -** Someone had botched this to use RIOHalted to indicated the number of RTAs -** 'disconnected'. The value in RIOHalted was then being used in the -** 'RIO_QUICK_CHECK' ioctl. A none zero value indicating that a least one RTA -** is 'disconnected'. The change was put in to satisfy a customer's needs. -** Having taken this bit of code out 'RIO_QUICK_CHECK' now no longer works for -** the customer. -** - if (Change == CONNECT) { - if (p->RIOHalted) p->RIOHalted --; - } - else { - p->RIOHalted ++; - } -** -** So - we need to implement it slightly differently - a new member of the -** rio_info struct - RIORtaDisCons (RIO RTA connections) keeps track of RTA -** connections and disconnections. -*/ - if (Change == CONNECT) { - if (p->RIORtaDisCons) - p->RIORtaDisCons--; - } else { - p->RIORtaDisCons++; - } - - if (p->RIOPrintDisabled == DONT_PRINT) - return; - - if (FromId > ToId) { - tp = FromId; - FromId = ToId; - ToId = tp; - tp = FromLink; - FromLink = ToLink; - ToLink = tp; - } - - FromName = FromId ? HostP->Mapping[FromId - 1].Name : HostP->Name; - FromType = FromId ? "RTA" : "HOST"; - ToName = ToId ? HostP->Mapping[ToId - 1].Name : HostP->Name; - ToType = ToId ? "RTA" : "HOST"; - - rio_dprintk(RIO_DEBUG_ROUTE, "Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected"); - printk(KERN_DEBUG "rio: Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected"); -} - -/* -** RIORemoveFromSavedTable : -** -** Delete and RTA entry from the saved table given to us -** by the configuration program. -*/ -static int RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap) -{ - int entry; - - /* - ** We loop for all entries even after finding an entry and - ** zeroing it because we may have two entries to delete if - ** it's a 16 port RTA. - */ - for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { - if (p->RIOSavedTable[entry].RtaUniqueNum == pMap->RtaUniqueNum) { - memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map)); - } - } - return 0; -} - - -/* -** RIOCheckDisconnected : -** -** Scan the unit links to and return zero if the unit is completely -** disconnected. -*/ -static int RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit) -{ - int link; - - - rio_dprintk(RIO_DEBUG_ROUTE, "RIOFreeDisconnect unit %d\n", unit); - /* - ** If the slot is tentative and does not belong to the - ** second half of a 16 port RTA then scan to see if - ** is disconnected. - */ - for (link = 0; link < LINKS_PER_UNIT; link++) { - if (HostP->Mapping[unit].Topology[link].Unit != ROUTE_DISCONNECT) - break; - } - - /* - ** If not all links are disconnected then we can forget about it. - */ - if (link < LINKS_PER_UNIT) - return 1; - -#ifdef NEED_TO_FIX_THIS - /* Ok so all the links are disconnected. But we may have only just - ** made this slot tentative and not yet received a topology update. - ** Lets check how long ago we made it tentative. - */ - rio_dprintk(RIO_DEBUG_ROUTE, "Just about to check LBOLT on entry %d\n", unit); - if (drv_getparm(LBOLT, (ulong_t *) & current_time)) - rio_dprintk(RIO_DEBUG_ROUTE, "drv_getparm(LBOLT,....) Failed.\n"); - - elapse_time = current_time - TentTime[unit]; - rio_dprintk(RIO_DEBUG_ROUTE, "elapse %d = current %d - tent %d (%d usec)\n", elapse_time, current_time, TentTime[unit], drv_hztousec(elapse_time)); - if (drv_hztousec(elapse_time) < WAIT_TO_FINISH) { - rio_dprintk(RIO_DEBUG_ROUTE, "Skipping slot %d, not timed out yet %d\n", unit, drv_hztousec(elapse_time)); - return 1; - } -#endif - - /* - ** We have found an usable slot. - ** If it is half of a 16 port RTA then delete the other half. - */ - if (HostP->Mapping[unit].ID2 != 0) { - int nOther = (HostP->Mapping[unit].ID2) - 1; - - rio_dprintk(RIO_DEBUG_ROUTE, "RioFreedis second slot %d.\n", nOther); - memset(&HostP->Mapping[nOther], 0, sizeof(struct Map)); - } - RIORemoveFromSavedTable(p, &HostP->Mapping[unit]); - - return 0; -} - - -/* -** RIOFindFreeID : -** -** This function scans the given host table for either one -** or two free unit ID's. -*/ - -int RIOFindFreeID(struct rio_info *p, struct Host *HostP, unsigned int * pID1, unsigned int * pID2) -{ - int unit, tempID; - - /* - ** Initialise the ID's to MAX_RUP. - ** We do this to make the loop for setting the ID's as simple as - ** possible. - */ - *pID1 = MAX_RUP; - if (pID2 != NULL) - *pID2 = MAX_RUP; - - /* - ** Scan all entries of the host mapping table for free slots. - ** We scan for free slots first and then if that is not successful - ** we start all over again looking for tentative slots we can re-use. - */ - for (unit = 0; unit < MAX_RUP; unit++) { - rio_dprintk(RIO_DEBUG_ROUTE, "Scanning unit %d\n", unit); - /* - ** If the flags are zero then the slot is empty. - */ - if (HostP->Mapping[unit].Flags == 0) { - rio_dprintk(RIO_DEBUG_ROUTE, " This slot is empty.\n"); - /* - ** If we haven't allocated the first ID then do it now. - */ - if (*pID1 == MAX_RUP) { - rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for first unit %d\n", unit); - *pID1 = unit; - - /* - ** If the second ID is not needed then we can return - ** now. - */ - if (pID2 == NULL) - return 0; - } else { - /* - ** Allocate the second slot and return. - */ - rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for second unit %d\n", unit); - *pID2 = unit; - return 0; - } - } - } - - /* - ** If we manage to come out of the free slot loop then we - ** need to start all over again looking for tentative slots - ** that we can re-use. - */ - rio_dprintk(RIO_DEBUG_ROUTE, "Starting to scan for tentative slots\n"); - for (unit = 0; unit < MAX_RUP; unit++) { - if (((HostP->Mapping[unit].Flags & SLOT_TENTATIVE) || (HostP->Mapping[unit].Flags == 0)) && !(HostP->Mapping[unit].Flags & RTA16_SECOND_SLOT)) { - rio_dprintk(RIO_DEBUG_ROUTE, " Slot %d looks promising.\n", unit); - - if (unit == *pID1) { - rio_dprintk(RIO_DEBUG_ROUTE, " No it isn't, its the 1st half\n"); - continue; - } - - /* - ** Slot is Tentative or Empty, but not a tentative second - ** slot of a 16 porter. - ** Attempt to free up this slot (and its parnter if - ** it is a 16 port slot. The second slot will become - ** empty after a call to RIOFreeDisconnected so thats why - ** we look for empty slots above as well). - */ - if (HostP->Mapping[unit].Flags != 0) - if (RIOFreeDisconnected(p, HostP, unit) != 0) - continue; - /* - ** If we haven't allocated the first ID then do it now. - */ - if (*pID1 == MAX_RUP) { - rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative entry for first unit %d\n", unit); - *pID1 = unit; - - /* - ** Clear out this slot now that we intend to use it. - */ - memset(&HostP->Mapping[unit], 0, sizeof(struct Map)); - - /* - ** If the second ID is not needed then we can return - ** now. - */ - if (pID2 == NULL) - return 0; - } else { - /* - ** Allocate the second slot and return. - */ - rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative/empty entry for second unit %d\n", unit); - *pID2 = unit; - - /* - ** Clear out this slot now that we intend to use it. - */ - memset(&HostP->Mapping[unit], 0, sizeof(struct Map)); - - /* At this point under the right(wrong?) conditions - ** we may have a first unit ID being higher than the - ** second unit ID. This is a bad idea if we are about - ** to fill the slots with a 16 port RTA. - ** Better check and swap them over. - */ - - if (*pID1 > *pID2) { - rio_dprintk(RIO_DEBUG_ROUTE, "Swapping IDS %d %d\n", *pID1, *pID2); - tempID = *pID1; - *pID1 = *pID2; - *pID2 = tempID; - } - return 0; - } - } - } - - /* - ** If we manage to get to the end of the second loop then we - ** can give up and return a failure. - */ - return 1; -} - - -/* -** The link switch scenario. -** -** Rta Wun (A) is connected to Tuw (A). -** The tables are all up to date, and the system is OK. -** -** If Wun (A) is now moved to Wun (B) before Wun (A) can -** become disconnected, then the follow happens: -** -** Tuw (A) spots the change of unit:link at the other end -** of its link and Tuw sends a topology packet reflecting -** the change: Tuw (A) now disconnected from Wun (A), and -** this is closely followed by a packet indicating that -** Tuw (A) is now connected to Wun (B). -** -** Wun (B) will spot that it has now become connected, and -** Wun will send a topology packet, which indicates that -** both Wun (A) and Wun (B) is connected to Tuw (A). -** -** Eventually Wun (A) realises that it is now disconnected -** and Wun will send out a topology packet indicating that -** Wun (A) is now disconnected. -*/ diff --git a/drivers/char/rio/riospace.h b/drivers/char/rio/riospace.h deleted file mode 100644 index ffb31d4..0000000 --- a/drivers/char/rio/riospace.h +++ /dev/null @@ -1,154 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riospace.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:13 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)riospace.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_riospace_h__ -#define __rio_riospace_h__ - -#define RIO_LOCATOR_LEN 16 -#define MAX_RIO_BOARDS 4 - -/* -** DONT change this file. At all. Unless you can rebuild the entire -** device driver, which you probably can't, then the rest of the -** driver won't see any changes you make here. So don't make any. -** In particular, it won't be able to see changes to RIO_SLOTS -*/ - -struct Conf { - char Locator[24]; - unsigned int StartupTime; - unsigned int SlowCook; - unsigned int IntrPollTime; - unsigned int BreakInterval; - unsigned int Timer; - unsigned int RtaLoadBase; - unsigned int HostLoadBase; - unsigned int XpHz; - unsigned int XpCps; - char *XpOn; - char *XpOff; - unsigned int MaxXpCps; - unsigned int MinXpCps; - unsigned int SpinCmds; - unsigned int FirstAddr; - unsigned int LastAddr; - unsigned int BufferSize; - unsigned int LowWater; - unsigned int LineLength; - unsigned int CmdTime; -}; - -/* -** Board types - these MUST correspond to product codes! -*/ -#define RIO_EMPTY 0x0 -#define RIO_EISA 0x3 -#define RIO_RTA_16 0x9 -#define RIO_AT 0xA -#define RIO_MCA 0xB -#define RIO_PCI 0xD -#define RIO_RTA 0xE - -/* -** Board data structure. This is used for configuration info -*/ -struct Brd { - unsigned char Type; /* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */ - unsigned char Ivec; /* POLLED or ivec number */ - unsigned char Mode; /* Control stuff, see below */ -}; - -struct Board { - char Locator[RIO_LOCATOR_LEN]; - int NumSlots; - struct Brd Boards[MAX_RIO_BOARDS]; -}; - -#define BOOT_FROM_LINK 0x00 -#define BOOT_FROM_RAM 0x01 -#define EXTERNAL_BUS_OFF 0x00 -#define EXTERNAL_BUS_ON 0x02 -#define INTERRUPT_DISABLE 0x00 -#define INTERRUPT_ENABLE 0x04 -#define BYTE_OPERATION 0x00 -#define WORD_OPERATION 0x08 -#define POLLED INTERRUPT_DISABLE -#define IRQ_15 (0x00 | INTERRUPT_ENABLE) -#define IRQ_12 (0x10 | INTERRUPT_ENABLE) -#define IRQ_11 (0x20 | INTERRUPT_ENABLE) -#define IRQ_9 (0x30 | INTERRUPT_ENABLE) -#define SLOW_LINKS 0x00 -#define FAST_LINKS 0x40 -#define SLOW_AT_BUS 0x00 -#define FAST_AT_BUS 0x80 -#define SLOW_PCI_TP 0x00 -#define FAST_PCI_TP 0x80 -/* -** Debug levels -*/ -#define DBG_NONE 0x00000000 - -#define DBG_INIT 0x00000001 -#define DBG_OPEN 0x00000002 -#define DBG_CLOSE 0x00000004 -#define DBG_IOCTL 0x00000008 - -#define DBG_READ 0x00000010 -#define DBG_WRITE 0x00000020 -#define DBG_INTR 0x00000040 -#define DBG_PROC 0x00000080 - -#define DBG_PARAM 0x00000100 -#define DBG_CMD 0x00000200 -#define DBG_XPRINT 0x00000400 -#define DBG_POLL 0x00000800 - -#define DBG_DAEMON 0x00001000 -#define DBG_FAIL 0x00002000 -#define DBG_MODEM 0x00004000 -#define DBG_LIST 0x00008000 - -#define DBG_ROUTE 0x00010000 -#define DBG_UTIL 0x00020000 -#define DBG_BOOT 0x00040000 -#define DBG_BUFFER 0x00080000 - -#define DBG_MON 0x00100000 -#define DBG_SPECIAL 0x00200000 -#define DBG_VPIX 0x00400000 -#define DBG_FLUSH 0x00800000 - -#define DBG_QENABLE 0x01000000 - -#define DBG_ALWAYS 0x80000000 - -#endif /* __rio_riospace_h__ */ diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c deleted file mode 100644 index 3d15802..0000000 --- a/drivers/char/rio/riotable.c +++ /dev/null @@ -1,941 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riotable.c -** SID : 1.2 -** Last Modified : 11/6/98 10:33:47 -** Retrieved : 11/6/98 10:33:50 -** -** ident @(#)riotable.c 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/string.h> - -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - -#include <linux/termios.h> -#include <linux/serial.h> - -#include <linux/generic_serial.h> - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" -#include "protsts.h" - -/* -** A configuration table has been loaded. It is now up to us -** to sort it out and use the information contained therein. -*/ -int RIONewTable(struct rio_info *p) -{ - int Host, Host1, Host2, NameIsUnique, Entry, SubEnt; - struct Map *MapP; - struct Map *HostMapP; - struct Host *HostP; - - char *cptr; - - /* - ** We have been sent a new table to install. We need to break - ** it down into little bits and spread it around a bit to see - ** what we have got. - */ - /* - ** Things to check: - ** (things marked 'xx' aren't checked any more!) - ** (1) That there are no booted Hosts/RTAs out there. - ** (2) That the names are properly formed - ** (3) That blank entries really are. - ** xx (4) That hosts mentioned in the table actually exist. xx - ** (5) That the IDs are unique (per host). - ** (6) That host IDs are zero - ** (7) That port numbers are valid - ** (8) That port numbers aren't duplicated - ** (9) That names aren't duplicated - ** xx (10) That hosts that actually exist are mentioned in the table. xx - */ - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(1)\n"); - if (p->RIOSystemUp) { /* (1) */ - p->RIOError.Error = HOST_HAS_ALREADY_BEEN_BOOTED; - return -EBUSY; - } - - p->RIOError.Error = NOTHING_WRONG_AT_ALL; - p->RIOError.Entry = -1; - p->RIOError.Other = -1; - - for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { - MapP = &p->RIOConnectTable[Entry]; - if ((MapP->Flags & RTA16_SECOND_SLOT) == 0) { - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(2)\n"); - cptr = MapP->Name; /* (2) */ - cptr[MAX_NAME_LEN - 1] = '\0'; - if (cptr[0] == '\0') { - memcpy(MapP->Name, MapP->RtaUniqueNum ? "RTA NN" : "HOST NN", 8); - MapP->Name[5] = '0' + Entry / 10; - MapP->Name[6] = '0' + Entry % 10; - } - while (*cptr) { - if (*cptr < ' ' || *cptr > '~') { - p->RIOError.Error = BAD_CHARACTER_IN_NAME; - p->RIOError.Entry = Entry; - return -ENXIO; - } - cptr++; - } - } - - /* - ** If the entry saved was a tentative entry then just forget - ** about it. - */ - if (MapP->Flags & SLOT_TENTATIVE) { - MapP->HostUniqueNum = 0; - MapP->RtaUniqueNum = 0; - continue; - } - - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(3)\n"); - if (!MapP->RtaUniqueNum && !MapP->HostUniqueNum) { /* (3) */ - if (MapP->ID || MapP->SysPort || MapP->Flags) { - rio_dprintk(RIO_DEBUG_TABLE, "%s pretending to be empty but isn't\n", MapP->Name); - p->RIOError.Error = TABLE_ENTRY_ISNT_PROPERLY_NULL; - p->RIOError.Entry = Entry; - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_TABLE, "!RIO: Daemon: test (3) passes\n"); - continue; - } - - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(4)\n"); - for (Host = 0; Host < p->RIONumHosts; Host++) { /* (4) */ - if (p->RIOHosts[Host].UniqueNum == MapP->HostUniqueNum) { - HostP = &p->RIOHosts[Host]; - /* - ** having done the lookup, we don't really want to do - ** it again, so hang the host number in a safe place - */ - MapP->Topology[0].Unit = Host; - break; - } - } - - if (Host >= p->RIONumHosts) { - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has unknown host unique number 0x%x\n", MapP->Name, MapP->HostUniqueNum); - MapP->HostUniqueNum = 0; - /* MapP->RtaUniqueNum = 0; */ - /* MapP->ID = 0; */ - /* MapP->Flags = 0; */ - /* MapP->SysPort = 0; */ - /* MapP->Name[0] = 0; */ - continue; - } - - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(5)\n"); - if (MapP->RtaUniqueNum) { /* (5) */ - if (!MapP->ID) { - rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an ID of zero!\n", MapP->Name); - p->RIOError.Error = ZERO_RTA_ID; - p->RIOError.Entry = Entry; - return -ENXIO; - } - if (MapP->ID > MAX_RUP) { - rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an invalid ID %d\n", MapP->Name, MapP->ID); - p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; - p->RIOError.Entry = Entry; - return -ENXIO; - } - for (SubEnt = 0; SubEnt < Entry; SubEnt++) { - if (MapP->HostUniqueNum == p->RIOConnectTable[SubEnt].HostUniqueNum && MapP->ID == p->RIOConnectTable[SubEnt].ID) { - rio_dprintk(RIO_DEBUG_TABLE, "Dupl. ID number allocated to RTA %s and RTA %s\n", MapP->Name, p->RIOConnectTable[SubEnt].Name); - p->RIOError.Error = DUPLICATED_RTA_ID; - p->RIOError.Entry = Entry; - p->RIOError.Other = SubEnt; - return -ENXIO; - } - /* - ** If the RtaUniqueNum is the same, it may be looking at both - ** entries for a 16 port RTA, so check the ids - */ - if ((MapP->RtaUniqueNum == p->RIOConnectTable[SubEnt].RtaUniqueNum) - && (MapP->ID2 != p->RIOConnectTable[SubEnt].ID)) { - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", MapP->Name); - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", p->RIOConnectTable[SubEnt].Name); - p->RIOError.Error = DUPLICATE_UNIQUE_NUMBER; - p->RIOError.Entry = Entry; - p->RIOError.Other = SubEnt; - return -ENXIO; - } - } - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7a)\n"); - /* (7a) */ - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) { - rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d-RTA %s is not a multiple of %d!\n", (int) MapP->SysPort, MapP->Name, PORTS_PER_RTA); - p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; - p->RIOError.Entry = Entry; - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7b)\n"); - /* (7b) */ - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) { - rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d for RTA %s is too big\n", (int) MapP->SysPort, MapP->Name); - p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; - p->RIOError.Entry = Entry; - return -ENXIO; - } - for (SubEnt = 0; SubEnt < Entry; SubEnt++) { - if (p->RIOConnectTable[SubEnt].Flags & RTA16_SECOND_SLOT) - continue; - if (p->RIOConnectTable[SubEnt].RtaUniqueNum) { - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(8)\n"); - /* (8) */ - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort == p->RIOConnectTable[SubEnt].SysPort)) { - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s:same TTY port # as RTA %s (%d)\n", MapP->Name, p->RIOConnectTable[SubEnt].Name, (int) MapP->SysPort); - p->RIOError.Error = TTY_NUMBER_IN_USE; - p->RIOError.Entry = Entry; - p->RIOError.Other = SubEnt; - return -ENXIO; - } - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(9)\n"); - if (strcmp(MapP->Name, p->RIOConnectTable[SubEnt].Name) == 0 && !(MapP->Flags & RTA16_SECOND_SLOT)) { /* (9) */ - rio_dprintk(RIO_DEBUG_TABLE, "RTA name %s used twice\n", MapP->Name); - p->RIOError.Error = NAME_USED_TWICE; - p->RIOError.Entry = Entry; - p->RIOError.Other = SubEnt; - return -ENXIO; - } - } - } - } else { /* (6) */ - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(6)\n"); - if (MapP->ID) { - rio_dprintk(RIO_DEBUG_TABLE, "RIO:HOST %s has been allocated ID that isn't zero!\n", MapP->Name); - p->RIOError.Error = HOST_ID_NOT_ZERO; - p->RIOError.Entry = Entry; - return -ENXIO; - } - if (MapP->SysPort != NO_PORT) { - rio_dprintk(RIO_DEBUG_TABLE, "RIO: HOST %s has been allocated port numbers!\n", MapP->Name); - p->RIOError.Error = HOST_SYSPORT_BAD; - p->RIOError.Entry = Entry; - return -ENXIO; - } - } - } - - /* - ** wow! if we get here then it's a goody! - */ - - /* - ** Zero the (old) entries for each host... - */ - for (Host = 0; Host < RIO_HOSTS; Host++) { - for (Entry = 0; Entry < MAX_RUP; Entry++) { - memset(&p->RIOHosts[Host].Mapping[Entry], 0, sizeof(struct Map)); - } - memset(&p->RIOHosts[Host].Name[0], 0, sizeof(p->RIOHosts[Host].Name)); - } - - /* - ** Copy in the new table entries - */ - for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { - rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: Copy table for Host entry %d\n", Entry); - MapP = &p->RIOConnectTable[Entry]; - - /* - ** Now, if it is an empty slot ignore it! - */ - if (MapP->HostUniqueNum == 0) - continue; - - /* - ** we saved the host number earlier, so grab it back - */ - HostP = &p->RIOHosts[MapP->Topology[0].Unit]; - - /* - ** If it is a host, then we only need to fill in the name field. - */ - if (MapP->ID == 0) { - rio_dprintk(RIO_DEBUG_TABLE, "Host entry found. Name %s\n", MapP->Name); - memcpy(HostP->Name, MapP->Name, MAX_NAME_LEN); - continue; - } - - /* - ** Its an RTA entry, so fill in the host mapping entries for it - ** and the port mapping entries. Notice that entry zero is for - ** ID one. - */ - HostMapP = &HostP->Mapping[MapP->ID - 1]; - - if (MapP->Flags & SLOT_IN_USE) { - rio_dprintk(RIO_DEBUG_TABLE, "Rta entry found. Name %s\n", MapP->Name); - /* - ** structure assign, then sort out the bits we shouldn't have done - */ - *HostMapP = *MapP; - - HostMapP->Flags = SLOT_IN_USE; - if (MapP->Flags & RTA16_SECOND_SLOT) - HostMapP->Flags |= RTA16_SECOND_SLOT; - - RIOReMapPorts(p, HostP, HostMapP); - } else { - rio_dprintk(RIO_DEBUG_TABLE, "TENTATIVE Rta entry found. Name %s\n", MapP->Name); - } - } - - for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) { - p->RIOSavedTable[Entry] = p->RIOConnectTable[Entry]; - } - - for (Host = 0; Host < p->RIONumHosts; Host++) { - for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) { - p->RIOHosts[Host].Topology[SubEnt].Unit = ROUTE_DISCONNECT; - p->RIOHosts[Host].Topology[SubEnt].Link = NO_LINK; - } - for (Entry = 0; Entry < MAX_RUP; Entry++) { - for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) { - p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Unit = ROUTE_DISCONNECT; - p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Link = NO_LINK; - } - } - if (!p->RIOHosts[Host].Name[0]) { - memcpy(p->RIOHosts[Host].Name, "HOST 1", 7); - p->RIOHosts[Host].Name[5] += Host; - } - /* - ** Check that default name assigned is unique. - */ - Host1 = Host; - NameIsUnique = 0; - while (!NameIsUnique) { - NameIsUnique = 1; - for (Host2 = 0; Host2 < p->RIONumHosts; Host2++) { - if (Host2 == Host) - continue; - if (strcmp(p->RIOHosts[Host].Name, p->RIOHosts[Host2].Name) - == 0) { - NameIsUnique = 0; - Host1++; - if (Host1 >= p->RIONumHosts) - Host1 = 0; - p->RIOHosts[Host].Name[5] = '1' + Host1; - } - } - } - /* - ** Rename host if name already used. - */ - if (Host1 != Host) { - rio_dprintk(RIO_DEBUG_TABLE, "Default name %s already used\n", p->RIOHosts[Host].Name); - memcpy(p->RIOHosts[Host].Name, "HOST 1", 7); - p->RIOHosts[Host].Name[5] += Host1; - } - rio_dprintk(RIO_DEBUG_TABLE, "Assigning default name %s\n", p->RIOHosts[Host].Name); - } - return 0; -} - -/* -** User process needs the config table - build it from first -** principles. -** -* FIXME: SMP locking -*/ -int RIOApel(struct rio_info *p) -{ - int Host; - int link; - int Rup; - int Next = 0; - struct Map *MapP; - struct Host *HostP; - unsigned long flags; - - rio_dprintk(RIO_DEBUG_TABLE, "Generating a table to return to config.rio\n"); - - memset(&p->RIOConnectTable[0], 0, sizeof(struct Map) * TOTAL_MAP_ENTRIES); - - for (Host = 0; Host < RIO_HOSTS; Host++) { - rio_dprintk(RIO_DEBUG_TABLE, "Processing host %d\n", Host); - HostP = &p->RIOHosts[Host]; - rio_spin_lock_irqsave(&HostP->HostLock, flags); - - MapP = &p->RIOConnectTable[Next++]; - MapP->HostUniqueNum = HostP->UniqueNum; - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - continue; - } - MapP->RtaUniqueNum = 0; - MapP->ID = 0; - MapP->Flags = SLOT_IN_USE; - MapP->SysPort = NO_PORT; - for (link = 0; link < LINKS_PER_UNIT; link++) - MapP->Topology[link] = HostP->Topology[link]; - memcpy(MapP->Name, HostP->Name, MAX_NAME_LEN); - for (Rup = 0; Rup < MAX_RUP; Rup++) { - if (HostP->Mapping[Rup].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) { - p->RIOConnectTable[Next] = HostP->Mapping[Rup]; - if (HostP->Mapping[Rup].Flags & SLOT_IN_USE) - p->RIOConnectTable[Next].Flags |= SLOT_IN_USE; - if (HostP->Mapping[Rup].Flags & SLOT_TENTATIVE) - p->RIOConnectTable[Next].Flags |= SLOT_TENTATIVE; - if (HostP->Mapping[Rup].Flags & RTA16_SECOND_SLOT) - p->RIOConnectTable[Next].Flags |= RTA16_SECOND_SLOT; - Next++; - } - } - rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - } - return 0; -} - -/* -** config.rio has taken a dislike to one of the gross maps entries. -** if the entry is suitably inactive, then we can gob on it and remove -** it from the table. -*/ -int RIODeleteRta(struct rio_info *p, struct Map *MapP) -{ - int host, entry, port, link; - int SysPort; - struct Host *HostP; - struct Map *HostMapP; - struct Port *PortP; - int work_done = 0; - unsigned long lock_flags, sem_flags; - - rio_dprintk(RIO_DEBUG_TABLE, "Delete entry on host %x, rta %x\n", MapP->HostUniqueNum, MapP->RtaUniqueNum); - - for (host = 0; host < p->RIONumHosts; host++) { - HostP = &p->RIOHosts[host]; - - rio_spin_lock_irqsave(&HostP->HostLock, lock_flags); - - if ((HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); - continue; - } - - for (entry = 0; entry < MAX_RUP; entry++) { - if (MapP->RtaUniqueNum == HostP->Mapping[entry].RtaUniqueNum) { - HostMapP = &HostP->Mapping[entry]; - rio_dprintk(RIO_DEBUG_TABLE, "Found entry offset %d on host %s\n", entry, HostP->Name); - - /* - ** Check all four links of the unit are disconnected - */ - for (link = 0; link < LINKS_PER_UNIT; link++) { - if (HostMapP->Topology[link].Unit != ROUTE_DISCONNECT) { - rio_dprintk(RIO_DEBUG_TABLE, "Entry is in use and cannot be deleted!\n"); - p->RIOError.Error = UNIT_IS_IN_USE; - rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); - return -EBUSY; - } - } - /* - ** Slot has been allocated, BUT not booted/routed/ - ** connected/selected or anything else-ed - */ - SysPort = HostMapP->SysPort; - - if (SysPort != NO_PORT) { - for (port = SysPort; port < SysPort + PORTS_PER_RTA; port++) { - PortP = p->RIOPortp[port]; - rio_dprintk(RIO_DEBUG_TABLE, "Unmap port\n"); - - rio_spin_lock_irqsave(&PortP->portSem, sem_flags); - - PortP->Mapped = 0; - - if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { - - rio_dprintk(RIO_DEBUG_TABLE, "Gob on port\n"); - PortP->TxBufferIn = PortP->TxBufferOut = 0; - /* What should I do - wakeup( &PortP->TxBufferIn ); - wakeup( &PortP->TxBufferOut); - */ - PortP->InUse = NOT_INUSE; - /* What should I do - wakeup( &PortP->InUse ); - signal(PortP->TtyP->t_pgrp,SIGKILL); - ttyflush(PortP->TtyP,(FREAD|FWRITE)); - */ - PortP->State |= RIO_CLOSING | RIO_DELETED; - } - - /* - ** For the second slot of a 16 port RTA, the - ** driver needs to reset the changes made to - ** the phb to port mappings in RIORouteRup. - */ - if (PortP->SecondBlock) { - u16 dest_unit = HostMapP->ID; - u16 dest_port = port - SysPort; - u16 __iomem *TxPktP; - struct PKT __iomem *Pkt; - - for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) { - /* - ** *TxPktP is the pointer to the - ** transmit packet on the host card. - ** This needs to be translated into - ** a 32 bit pointer so it can be - ** accessed from the driver. - */ - Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&*TxPktP)); - rio_dprintk(RIO_DEBUG_TABLE, "Tx packet (%x) destination: Old %x:%x New %x:%x\n", readw(TxPktP), readb(&Pkt->dest_unit), readb(&Pkt->dest_port), dest_unit, dest_port); - writew(dest_unit, &Pkt->dest_unit); - writew(dest_port, &Pkt->dest_port); - } - rio_dprintk(RIO_DEBUG_TABLE, "Port %d phb destination: Old %x:%x New %x:%x\n", port, readb(&PortP->PhbP->destination) & 0xff, (readb(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port); - writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination); - } - rio_spin_unlock_irqrestore(&PortP->portSem, sem_flags); - } - } - rio_dprintk(RIO_DEBUG_TABLE, "Entry nulled.\n"); - memset(HostMapP, 0, sizeof(struct Map)); - work_done++; - } - } - rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags); - } - - /* XXXXX lock me up */ - for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { - if (p->RIOSavedTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) { - memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map)); - work_done++; - } - if (p->RIOConnectTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) { - memset(&p->RIOConnectTable[entry], 0, sizeof(struct Map)); - work_done++; - } - } - if (work_done) - return 0; - - rio_dprintk(RIO_DEBUG_TABLE, "Couldn't find entry to be deleted\n"); - p->RIOError.Error = COULDNT_FIND_ENTRY; - return -ENXIO; -} - -int RIOAssignRta(struct rio_info *p, struct Map *MapP) -{ - int host; - struct Map *HostMapP; - char *sptr; - int link; - - - rio_dprintk(RIO_DEBUG_TABLE, "Assign entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort); - - if ((MapP->ID != (u16) - 1) && ((int) MapP->ID < (int) 1 || (int) MapP->ID > MAX_RUP)) { - rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n"); - p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - if (MapP->RtaUniqueNum == 0) { - rio_dprintk(RIO_DEBUG_TABLE, "Rta Unique number zero!\n"); - p->RIOError.Error = RTA_UNIQUE_NUMBER_ZERO; - return -EINVAL; - } - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) { - rio_dprintk(RIO_DEBUG_TABLE, "Port %d not multiple of %d!\n", (int) MapP->SysPort, PORTS_PER_RTA); - p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) { - rio_dprintk(RIO_DEBUG_TABLE, "Port %d not valid!\n", (int) MapP->SysPort); - p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - /* - ** Copy the name across to the map entry. - */ - MapP->Name[MAX_NAME_LEN - 1] = '\0'; - sptr = MapP->Name; - while (*sptr) { - if (*sptr < ' ' || *sptr > '~') { - rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n"); - p->RIOError.Error = BAD_CHARACTER_IN_NAME; - return -EINVAL; - } - sptr++; - } - - for (host = 0; host < p->RIONumHosts; host++) { - if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) { - if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) { - p->RIOError.Error = HOST_NOT_RUNNING; - return -ENXIO; - } - - /* - ** Now we have a host we need to allocate an ID - ** if the entry does not already have one. - */ - if (MapP->ID == (u16) - 1) { - int nNewID; - - rio_dprintk(RIO_DEBUG_TABLE, "Attempting to get a new ID for rta \"%s\"\n", MapP->Name); - /* - ** The idea here is to allow RTA's to be assigned - ** before they actually appear on the network. - ** This allows the addition of RTA's without having - ** to plug them in. - ** What we do is: - ** - Find a free ID and allocate it to the RTA. - ** - If this map entry is the second half of a - ** 16 port entry then find the other half and - ** make sure the 2 cross reference each other. - */ - if (RIOFindFreeID(p, &p->RIOHosts[host], &nNewID, NULL) != 0) { - p->RIOError.Error = COULDNT_FIND_ENTRY; - return -EBUSY; - } - MapP->ID = (u16) nNewID + 1; - rio_dprintk(RIO_DEBUG_TABLE, "Allocated ID %d for this new RTA.\n", MapP->ID); - HostMapP = &p->RIOHosts[host].Mapping[nNewID]; - HostMapP->RtaUniqueNum = MapP->RtaUniqueNum; - HostMapP->HostUniqueNum = MapP->HostUniqueNum; - HostMapP->ID = MapP->ID; - for (link = 0; link < LINKS_PER_UNIT; link++) { - HostMapP->Topology[link].Unit = ROUTE_DISCONNECT; - HostMapP->Topology[link].Link = NO_LINK; - } - if (MapP->Flags & RTA16_SECOND_SLOT) { - int unit; - - for (unit = 0; unit < MAX_RUP; unit++) - if (p->RIOHosts[host].Mapping[unit].RtaUniqueNum == MapP->RtaUniqueNum) - break; - if (unit == MAX_RUP) { - p->RIOError.Error = COULDNT_FIND_ENTRY; - return -EBUSY; - } - HostMapP->Flags |= RTA16_SECOND_SLOT; - HostMapP->ID2 = MapP->ID2 = p->RIOHosts[host].Mapping[unit].ID; - p->RIOHosts[host].Mapping[unit].ID2 = MapP->ID; - rio_dprintk(RIO_DEBUG_TABLE, "Cross referenced id %d to ID %d.\n", MapP->ID, p->RIOHosts[host].Mapping[unit].ID); - } - } - - HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1]; - - if (HostMapP->Flags & SLOT_IN_USE) { - rio_dprintk(RIO_DEBUG_TABLE, "Map table slot for ID %d is already in use.\n", MapP->ID); - p->RIOError.Error = ID_ALREADY_IN_USE; - return -EBUSY; - } - - /* - ** Assign the sys ports and the name, and mark the slot as - ** being in use. - */ - HostMapP->SysPort = MapP->SysPort; - if ((MapP->Flags & RTA16_SECOND_SLOT) == 0) - memcpy(HostMapP->Name, MapP->Name, MAX_NAME_LEN); - HostMapP->Flags = SLOT_IN_USE | RTA_BOOTED; -#ifdef NEED_TO_FIX - RIO_SV_BROADCAST(p->RIOHosts[host].svFlags[MapP->ID - 1]); -#endif - if (MapP->Flags & RTA16_SECOND_SLOT) - HostMapP->Flags |= RTA16_SECOND_SLOT; - - RIOReMapPorts(p, &p->RIOHosts[host], HostMapP); - /* - ** Adjust 2nd block of 8 phbs - */ - if (MapP->Flags & RTA16_SECOND_SLOT) - RIOFixPhbs(p, &p->RIOHosts[host], HostMapP->ID - 1); - - if (HostMapP->SysPort != NO_PORT) { - if (HostMapP->SysPort < p->RIOFirstPortsBooted) - p->RIOFirstPortsBooted = HostMapP->SysPort; - if (HostMapP->SysPort > p->RIOLastPortsBooted) - p->RIOLastPortsBooted = HostMapP->SysPort; - } - if (MapP->Flags & RTA16_SECOND_SLOT) - rio_dprintk(RIO_DEBUG_TABLE, "Second map of RTA %s added to configuration\n", p->RIOHosts[host].Mapping[MapP->ID2 - 1].Name); - else - rio_dprintk(RIO_DEBUG_TABLE, "RTA %s added to configuration\n", MapP->Name); - return 0; - } - } - p->RIOError.Error = UNKNOWN_HOST_NUMBER; - rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum); - return -ENXIO; -} - - -int RIOReMapPorts(struct rio_info *p, struct Host *HostP, struct Map *HostMapP) -{ - struct Port *PortP; - unsigned int SubEnt; - unsigned int HostPort; - unsigned int SysPort; - u16 RtaType; - unsigned long flags; - - rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d to id %d\n", (int) HostMapP->SysPort, HostMapP->ID); - - /* - ** We need to tell the UnixRups which sysport the rup corresponds to - */ - HostP->UnixRups[HostMapP->ID - 1].BaseSysPort = HostMapP->SysPort; - - if (HostMapP->SysPort == NO_PORT) - return (0); - - RtaType = GetUnitType(HostMapP->RtaUniqueNum); - rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d-%d\n", (int) HostMapP->SysPort, (int) HostMapP->SysPort + PORTS_PER_RTA - 1); - - /* - ** now map each of its eight ports - */ - for (SubEnt = 0; SubEnt < PORTS_PER_RTA; SubEnt++) { - rio_dprintk(RIO_DEBUG_TABLE, "subent = %d, HostMapP->SysPort = %d\n", SubEnt, (int) HostMapP->SysPort); - SysPort = HostMapP->SysPort + SubEnt; /* portnumber within system */ - /* portnumber on host */ - - HostPort = (HostMapP->ID - 1) * PORTS_PER_RTA + SubEnt; - - rio_dprintk(RIO_DEBUG_TABLE, "c1 p = %p, p->rioPortp = %p\n", p, p->RIOPortp); - PortP = p->RIOPortp[SysPort]; - rio_dprintk(RIO_DEBUG_TABLE, "Map port\n"); - - /* - ** Point at all the real neat data structures - */ - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->HostP = HostP; - PortP->Caddr = HostP->Caddr; - - /* - ** The PhbP cannot be filled in yet - ** unless the host has been booted - */ - if ((HostP->Flags & RUN_STATE) == RC_RUNNING) { - struct PHB __iomem *PhbP = PortP->PhbP = &HostP->PhbP[HostPort]; - PortP->TxAdd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_add)); - PortP->TxStart = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_start)); - PortP->TxEnd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_end)); - PortP->RxRemove = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_remove)); - PortP->RxStart = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_start)); - PortP->RxEnd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_end)); - } else - PortP->PhbP = NULL; - - /* - ** port related flags - */ - PortP->HostPort = HostPort; - /* - ** For each part of a 16 port RTA, RupNum is ID - 1. - */ - PortP->RupNum = HostMapP->ID - 1; - if (HostMapP->Flags & RTA16_SECOND_SLOT) { - PortP->ID2 = HostMapP->ID2 - 1; - PortP->SecondBlock = 1; - } else { - PortP->ID2 = 0; - PortP->SecondBlock = 0; - } - PortP->RtaUniqueNum = HostMapP->RtaUniqueNum; - - /* - ** If the port was already mapped then thats all we need to do. - */ - if (PortP->Mapped) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - continue; - } else - HostMapP->Flags &= ~RTA_NEWBOOT; - - PortP->State = 0; - PortP->Config = 0; - /* - ** Check out the module type - if it is special (read only etc.) - ** then we need to set flags in the PortP->Config. - ** Note: For 16 port RTA, all ports are of the same type. - */ - if (RtaType == TYPE_RTA16) { - PortP->Config |= p->RIOModuleTypes[HostP->UnixRups[HostMapP->ID - 1].ModTypes].Flags[SubEnt % PORTS_PER_MODULE]; - } else { - if (SubEnt < PORTS_PER_MODULE) - PortP->Config |= p->RIOModuleTypes[LONYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE]; - else - PortP->Config |= p->RIOModuleTypes[HINYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE]; - } - - /* - ** more port related flags - */ - PortP->PortState = 0; - PortP->ModemLines = 0; - PortP->ModemState = 0; - PortP->CookMode = COOK_WELL; - PortP->ParamSem = 0; - PortP->FlushCmdBodge = 0; - PortP->WflushFlag = 0; - PortP->MagicFlags = 0; - PortP->Lock = 0; - PortP->Store = 0; - PortP->FirstOpen = 1; - - /* - ** Buffers 'n things - */ - PortP->RxDataStart = 0; - PortP->Cor2Copy = 0; - PortP->Name = &HostMapP->Name[0]; - PortP->statsGather = 0; - PortP->txchars = 0; - PortP->rxchars = 0; - PortP->opens = 0; - PortP->closes = 0; - PortP->ioctls = 0; - if (PortP->TxRingBuffer) - memset(PortP->TxRingBuffer, 0, p->RIOBufferSize); - else if (p->RIOBufferSize) { - PortP->TxRingBuffer = kzalloc(p->RIOBufferSize, GFP_KERNEL); - } - PortP->TxBufferOut = 0; - PortP->TxBufferIn = 0; - PortP->Debug = 0; - /* - ** LastRxTgl stores the state of the rx toggle bit for this - ** port, to be compared with the state of the next pkt received. - ** If the same, we have received the same rx pkt from the RTA - ** twice. Initialise to a value not equal to PHB_RX_TGL or 0. - */ - PortP->LastRxTgl = ~(u8) PHB_RX_TGL; - - /* - ** and mark the port as usable - */ - PortP->Mapped = 1; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - if (HostMapP->SysPort < p->RIOFirstPortsMapped) - p->RIOFirstPortsMapped = HostMapP->SysPort; - if (HostMapP->SysPort > p->RIOLastPortsMapped) - p->RIOLastPortsMapped = HostMapP->SysPort; - - return 0; -} - -int RIOChangeName(struct rio_info *p, struct Map *MapP) -{ - int host; - struct Map *HostMapP; - char *sptr; - - rio_dprintk(RIO_DEBUG_TABLE, "Change name entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort); - - if (MapP->ID > MAX_RUP) { - rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n"); - p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE; - return -EINVAL; - } - - MapP->Name[MAX_NAME_LEN - 1] = '\0'; - sptr = MapP->Name; - - while (*sptr) { - if (*sptr < ' ' || *sptr > '~') { - rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n"); - p->RIOError.Error = BAD_CHARACTER_IN_NAME; - return -EINVAL; - } - sptr++; - } - - for (host = 0; host < p->RIONumHosts; host++) { - if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) { - if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) { - p->RIOError.Error = HOST_NOT_RUNNING; - return -ENXIO; - } - if (MapP->ID == 0) { - memcpy(p->RIOHosts[host].Name, MapP->Name, MAX_NAME_LEN); - return 0; - } - - HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1]; - - if (HostMapP->RtaUniqueNum != MapP->RtaUniqueNum) { - p->RIOError.Error = RTA_NUMBER_WRONG; - return -ENXIO; - } - memcpy(HostMapP->Name, MapP->Name, MAX_NAME_LEN); - return 0; - } - } - p->RIOError.Error = UNKNOWN_HOST_NUMBER; - rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum); - return -ENXIO; -} diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c deleted file mode 100644 index 8a90393..0000000 --- a/drivers/char/rio/riotty.c +++ /dev/null @@ -1,654 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riotty.c -** SID : 1.3 -** Last Modified : 11/6/98 10:33:47 -** Retrieved : 11/6/98 10:33:50 -** -** ident @(#)riotty.c 1.3 -** -** ----------------------------------------------------------------------------- -*/ - -#define __EXPLICIT_DEF_H__ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <linux/string.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/string.h> -#include <asm/uaccess.h> - -#include <linux/termios.h> - -#include <linux/serial.h> - -#include <linux/generic_serial.h> - - -#include "linux_compat.h" -#include "rio_linux.h" -#include "pkt.h" -#include "daemon.h" -#include "rio.h" -#include "riospace.h" -#include "cmdpkt.h" -#include "map.h" -#include "rup.h" -#include "port.h" -#include "riodrvr.h" -#include "rioinfo.h" -#include "func.h" -#include "errors.h" -#include "pci.h" - -#include "parmmap.h" -#include "unixrup.h" -#include "board.h" -#include "host.h" -#include "phb.h" -#include "link.h" -#include "cmdblk.h" -#include "route.h" -#include "cirrus.h" -#include "rioioctl.h" -#include "param.h" - -static void RIOClearUp(struct Port *PortP); - -/* Below belongs in func.h */ -int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg); - - -extern struct rio_info *p; - - -int riotopen(struct tty_struct *tty, struct file *filp) -{ - unsigned int SysPort; - int repeat_this = 250; - struct Port *PortP; /* pointer to the port structure */ - unsigned long flags; - int retval = 0; - - func_enter(); - - /* Make sure driver_data is NULL in case the rio isn't booted jet. Else gs_close - is going to oops. - */ - tty->driver_data = NULL; - - SysPort = rio_minor(tty); - - if (p->RIOFailed) { - rio_dprintk(RIO_DEBUG_TTY, "System initialisation failed\n"); - func_exit(); - return -ENXIO; - } - - rio_dprintk(RIO_DEBUG_TTY, "port open SysPort %d (mapped:%d)\n", SysPort, p->RIOPortp[SysPort]->Mapped); - - /* - ** Validate that we have received a legitimate request. - ** Currently, just check that we are opening a port on - ** a host card that actually exists, and that the port - ** has been mapped onto a host. - */ - if (SysPort >= RIO_PORTS) { /* out of range ? */ - rio_dprintk(RIO_DEBUG_TTY, "Illegal port number %d\n", SysPort); - func_exit(); - return -ENXIO; - } - - /* - ** Grab pointer to the port stucture - */ - PortP = p->RIOPortp[SysPort]; /* Get control struc */ - rio_dprintk(RIO_DEBUG_TTY, "PortP: %p\n", PortP); - if (!PortP->Mapped) { /* we aren't mapped yet! */ - /* - ** The system doesn't know which RTA this port - ** corresponds to. - */ - rio_dprintk(RIO_DEBUG_TTY, "port not mapped into system\n"); - func_exit(); - return -ENXIO; - } - - tty->driver_data = PortP; - - PortP->gs.port.tty = tty; - PortP->gs.port.count++; - - rio_dprintk(RIO_DEBUG_TTY, "%d bytes in tx buffer\n", PortP->gs.xmit_cnt); - - retval = gs_init_port(&PortP->gs); - if (retval) { - PortP->gs.port.count--; - return -ENXIO; - } - /* - ** If the host hasn't been booted yet, then - ** fail - */ - if ((PortP->HostP->Flags & RUN_STATE) != RC_RUNNING) { - rio_dprintk(RIO_DEBUG_TTY, "Host not running\n"); - func_exit(); - return -ENXIO; - } - - /* - ** If the RTA has not booted yet and the user has choosen to block - ** until the RTA is present then we must spin here waiting for - ** the RTA to boot. - */ - /* I find the above code a bit hairy. I find the below code - easier to read and shorter. Now, if it works too that would - be great... -- REW - */ - rio_dprintk(RIO_DEBUG_TTY, "Checking if RTA has booted... \n"); - while (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)) { - if (!PortP->WaitUntilBooted) { - rio_dprintk(RIO_DEBUG_TTY, "RTA never booted\n"); - func_exit(); - return -ENXIO; - } - - /* Under Linux you'd normally use a wait instead of this - busy-waiting. I'll stick with the old implementation for - now. --REW - */ - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "RTA_wait_for_boot: EINTR in delay \n"); - func_exit(); - return -EINTR; - } - if (repeat_this-- <= 0) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for RTA to boot timeout\n"); - func_exit(); - return -EIO; - } - } - rio_dprintk(RIO_DEBUG_TTY, "RTA has been booted\n"); - rio_spin_lock_irqsave(&PortP->portSem, flags); - if (p->RIOHalted) { - goto bombout; - } - - /* - ** If the port is in the final throws of being closed, - ** we should wait here (politely), waiting - ** for it to finish, so that it doesn't close us! - */ - while ((PortP->State & RIO_CLOSING) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for RIO_CLOSING to go away\n"); - if (repeat_this-- <= 0) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - retval = -EINTR; - goto bombout; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_spin_lock_irqsave(&PortP->portSem, flags); - retval = -EINTR; - goto bombout; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - if (!PortP->Mapped) { - rio_dprintk(RIO_DEBUG_TTY, "Port unmapped while closing!\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - retval = -ENXIO; - func_exit(); - return retval; - } - - if (p->RIOHalted) { - goto bombout; - } - -/* -** 15.10.1998 ARG - ESIL 0761 part fix -** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure, -** we need to make sure that the flags are clear when the port is opened. -*/ - /* Uh? Suppose I turn these on and then another process opens - the port again? The flags get cleared! Not good. -- REW */ - if (!(PortP->State & (RIO_LOPEN | RIO_MOPEN))) { - PortP->Config &= ~(RIO_CTSFLOW | RIO_RTSFLOW); - } - - if (!(PortP->firstOpen)) { /* First time ? */ - rio_dprintk(RIO_DEBUG_TTY, "First open for this port\n"); - - - PortP->firstOpen++; - PortP->CookMode = 0; /* XXX RIOCookMode(tp); */ - PortP->InUse = NOT_INUSE; - - /* Tentative fix for bug PR27. Didn't work. */ - /* PortP->gs.xmit_cnt = 0; */ - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - /* Someone explain to me why this delay/config is - here. If I read the docs correctly the "open" - command piggybacks the parameters immediately. - -- REW */ - RIOParam(PortP, RIOC_OPEN, 1, OK_TO_SLEEP); /* Open the port */ - rio_spin_lock_irqsave(&PortP->portSem, flags); - - /* - ** wait for the port to be not closed. - */ - while (!(PortP->PortState & PORT_ISOPEN) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for PORT_ISOPEN-currently %x\n", PortP->PortState); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for open to finish broken by signal\n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - func_exit(); - return -EINTR; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - if (p->RIOHalted) { - retval = -EIO; - bombout: - /* RIOClearUp( PortP ); */ - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return retval; - } - rio_dprintk(RIO_DEBUG_TTY, "PORT_ISOPEN found\n"); - } - rio_dprintk(RIO_DEBUG_TTY, "Modem - test for carrier\n"); - /* - ** ACTION - ** insert test for carrier here. -- ??? - ** I already see that test here. What's the deal? -- REW - */ - if ((PortP->gs.port.tty->termios->c_cflag & CLOCAL) || - (PortP->ModemState & RIOC_MSVR1_CD)) { - rio_dprintk(RIO_DEBUG_TTY, "open(%d) Modem carr on\n", SysPort); - /* - tp->tm.c_state |= CARR_ON; - wakeup((caddr_t) &tp->tm.c_canq); - */ - PortP->State |= RIO_CARR_ON; - wake_up_interruptible(&PortP->gs.port.open_wait); - } else { /* no carrier - wait for DCD */ - /* - while (!(PortP->gs.port.tty->termios->c_state & CARR_ON) && - !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted ) - */ - while (!(PortP->State & RIO_CARR_ON) && !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr on\n", SysPort); - /* - PortP->gs.port.tty->termios->c_state |= WOPEN; - */ - PortP->State |= RIO_WOPEN; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_spin_lock_irqsave(&PortP->portSem, flags); - /* - ** ACTION: verify that this is a good thing - ** to do here. -- ??? - ** I think it's OK. -- REW - */ - rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr broken by signal\n", SysPort); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - /* - tp->tm.c_state &= ~WOPEN; - */ - PortP->State &= ~RIO_WOPEN; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - func_exit(); - return -EINTR; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - PortP->State &= ~RIO_WOPEN; - } - if (p->RIOHalted) - goto bombout; - rio_dprintk(RIO_DEBUG_TTY, "Setting RIO_MOPEN\n"); - PortP->State |= RIO_MOPEN; - - if (p->RIOHalted) - goto bombout; - - rio_dprintk(RIO_DEBUG_TTY, "high level open done\n"); - - /* - ** Count opens for port statistics reporting - */ - if (PortP->statsGather) - PortP->opens++; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_TTY, "Returning from open\n"); - func_exit(); - return 0; -} - -/* -** RIOClose the port. -** The operating system thinks that this is last close for the device. -** As there are two interfaces to the port (Modem and tty), we need to -** check that both are closed before we close the device. -*/ -int riotclose(void *ptr) -{ - struct Port *PortP = ptr; /* pointer to the port structure */ - int deleted = 0; - int try = -1; /* Disable the timeouts by setting them to -1 */ - int repeat_this = -1; /* Congrats to those having 15 years of - uptime! (You get to break the driver.) */ - unsigned long end_time; - struct tty_struct *tty; - unsigned long flags; - int rv = 0; - - rio_dprintk(RIO_DEBUG_TTY, "port close SysPort %d\n", PortP->PortNum); - - /* PortP = p->RIOPortp[SysPort]; */ - rio_dprintk(RIO_DEBUG_TTY, "Port is at address %p\n", PortP); - /* tp = PortP->TtyP; *//* Get tty */ - tty = PortP->gs.port.tty; - rio_dprintk(RIO_DEBUG_TTY, "TTY is at address %p\n", tty); - - if (PortP->gs.closing_wait) - end_time = jiffies + PortP->gs.closing_wait; - else - end_time = jiffies + MAX_SCHEDULE_TIMEOUT; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - - /* - ** Setting this flag will make any process trying to open - ** this port block until we are complete closing it. - */ - PortP->State |= RIO_CLOSING; - - if ((PortP->State & RIO_DELETED)) { - rio_dprintk(RIO_DEBUG_TTY, "Close on deleted RTA\n"); - deleted = 1; - } - - if (p->RIOHalted) { - RIOClearUp(PortP); - rv = -EIO; - goto close_end; - } - - rio_dprintk(RIO_DEBUG_TTY, "Clear bits\n"); - /* - ** clear the open bits for this device - */ - PortP->State &= ~RIO_MOPEN; - PortP->State &= ~RIO_CARR_ON; - PortP->ModemState &= ~RIOC_MSVR1_CD; - /* - ** If the device was open as both a Modem and a tty line - ** then we need to wimp out here, as the port has not really - ** been finally closed (gee, whizz!) The test here uses the - ** bit for the OTHER mode of operation, to see if THAT is - ** still active! - */ - if ((PortP->State & (RIO_LOPEN | RIO_MOPEN))) { - /* - ** The port is still open for the other task - - ** return, pretending that we are still active. - */ - rio_dprintk(RIO_DEBUG_TTY, "Channel %d still open !\n", PortP->PortNum); - PortP->State &= ~RIO_CLOSING; - if (PortP->firstOpen) - PortP->firstOpen--; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EIO; - } - - rio_dprintk(RIO_DEBUG_TTY, "Closing down - everything must go!\n"); - - PortP->State &= ~RIO_DYNOROD; - - /* - ** This is where we wait for the port - ** to drain down before closing. Bye-bye.... - ** (We never meant to do this) - */ - rio_dprintk(RIO_DEBUG_TTY, "Timeout 1 starts\n"); - - if (!deleted) - while ((PortP->InUse != NOT_INUSE) && !p->RIOHalted && (PortP->TxBufferIn != PortP->TxBufferOut)) { - if (repeat_this-- <= 0) { - rv = -EINTR; - rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - goto close_end; - } - rio_dprintk(RIO_DEBUG_TTY, "Calling timeout to flush in closing\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (RIODelay_ni(PortP, HUNDRED_MS * 10) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n"); - rv = -EINTR; - rio_spin_lock_irqsave(&PortP->portSem, flags); - goto close_end; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - PortP->TxBufferIn = PortP->TxBufferOut = 0; - repeat_this = 0xff; - - PortP->InUse = 0; - if ((PortP->State & (RIO_LOPEN | RIO_MOPEN))) { - /* - ** The port has been re-opened for the other task - - ** return, pretending that we are still active. - */ - rio_dprintk(RIO_DEBUG_TTY, "Channel %d re-open!\n", PortP->PortNum); - PortP->State &= ~RIO_CLOSING; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (PortP->firstOpen) - PortP->firstOpen--; - return -EIO; - } - - if (p->RIOHalted) { - RIOClearUp(PortP); - goto close_end; - } - - /* Can't call RIOShortCommand with the port locked. */ - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - - if (RIOShortCommand(p, PortP, RIOC_CLOSE, 1, 0) == RIO_FAIL) { - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - rio_spin_lock_irqsave(&PortP->portSem, flags); - goto close_end; - } - - if (!deleted) - while (try && (PortP->PortState & PORT_ISOPEN)) { - try--; - if (time_after(jiffies, end_time)) { - rio_dprintk(RIO_DEBUG_TTY, "Run out of tries - force the bugger shut!\n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - break; - } - rio_dprintk(RIO_DEBUG_TTY, "Close: PortState:ISOPEN is %d\n", PortP->PortState & PORT_ISOPEN); - - if (p->RIOHalted) { - RIOClearUp(PortP); - rio_spin_lock_irqsave(&PortP->portSem, flags); - goto close_end; - } - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n"); - RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); - break; - } - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_TTY, "Close: try was %d on completion\n", try); - - /* RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); */ - -/* -** 15.10.1998 ARG - ESIL 0761 part fix -** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure,** we need to make sure that the flags are clear when the port is opened. -*/ - PortP->Config &= ~(RIO_CTSFLOW | RIO_RTSFLOW); - - /* - ** Count opens for port statistics reporting - */ - if (PortP->statsGather) - PortP->closes++; - -close_end: - /* XXX: Why would a "DELETED" flag be reset here? I'd have - thought that a "deleted" flag means that the port was - permanently gone, but here we can make it reappear by it - being in close during the "deletion". - */ - PortP->State &= ~(RIO_CLOSING | RIO_DELETED); - if (PortP->firstOpen) - PortP->firstOpen--; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_TTY, "Return from close\n"); - return rv; -} - - - -static void RIOClearUp(struct Port *PortP) -{ - rio_dprintk(RIO_DEBUG_TTY, "RIOHalted set\n"); - PortP->Config = 0; /* Direct semaphore */ - PortP->PortState = 0; - PortP->firstOpen = 0; - PortP->FlushCmdBodge = 0; - PortP->ModemState = PortP->CookMode = 0; - PortP->Mapped = 0; - PortP->WflushFlag = 0; - PortP->MagicFlags = 0; - PortP->RxDataStart = 0; - PortP->TxBufferIn = 0; - PortP->TxBufferOut = 0; -} - -/* -** Put a command onto a port. -** The PortPointer, command, length and arg are passed. -** The len is the length *inclusive* of the command byte, -** and so for a command that takes no data, len==1. -** The arg is a single byte, and is only used if len==2. -** Other values of len aren't allowed, and will cause -** a panic. -*/ -int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg) -{ - struct PKT __iomem *PacketP; - int retries = 20; /* at 10 per second -> 2 seconds */ - unsigned long flags; - - rio_dprintk(RIO_DEBUG_TTY, "entering shortcommand.\n"); - - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n"); - return RIO_FAIL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - - /* - ** If the port is in use for pre-emptive command, then wait for it to - ** be free again. - */ - while ((PortP->InUse != NOT_INUSE) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for not in use (%d)\n", retries); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (retries-- <= 0) { - return RIO_FAIL; - } - if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) { - return RIO_FAIL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - if (PortP->State & RIO_DELETED) { - rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return RIO_FAIL; - } - - while (!can_add_transmit(&PacketP, PortP) && !p->RIOHalted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting to add short command to queue (%d)\n", retries); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - if (retries-- <= 0) { - rio_dprintk(RIO_DEBUG_TTY, "out of tries. Failing\n"); - return RIO_FAIL; - } - if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) { - return RIO_FAIL; - } - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - if (p->RIOHalted) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return RIO_FAIL; - } - - /* - ** set the command byte and the argument byte - */ - writeb(command, &PacketP->data[0]); - - if (len == 2) - writeb(arg, &PacketP->data[1]); - - /* - ** set the length of the packet and set the command bit. - */ - writeb(PKT_CMD_BIT | len, &PacketP->len); - - add_transmit(PortP); - /* - ** Count characters transmitted for port statistics reporting - */ - if (PortP->statsGather) - PortP->txchars += len; - - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return p->RIOHalted ? RIO_FAIL : ~RIO_FAIL; -} - - diff --git a/drivers/char/rio/route.h b/drivers/char/rio/route.h deleted file mode 100644 index 46e9637..0000000 --- a/drivers/char/rio/route.h +++ /dev/null @@ -1,101 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* R O U T E H E A D E R - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _route_h -#define _route_h - -#define MAX_LINKS 4 -#define MAX_NODES 17 /* Maximum nodes in a subnet */ -#define NODE_BYTES ((MAX_NODES / 8) + 1) /* Number of bytes needed for - 1 bit per node */ -#define ROUTE_DATA_SIZE (NODE_BYTES + 2) /* Number of bytes for complete - info about cost etc. */ -#define ROUTES_PER_PACKET ((PKT_MAX_DATA_LEN -2)/ ROUTE_DATA_SIZE) - /* Number of nodes we can squeeze - into one packet */ -#define MAX_TOPOLOGY_PACKETS (MAX_NODES / ROUTES_PER_PACKET + 1) -/************************************************ - * Define the types of command for the ROUTE RUP. - ************************************************/ -#define ROUTE_REQUEST 0 /* Request an ID */ -#define ROUTE_FOAD 1 /* Kill the RTA */ -#define ROUTE_ALREADY 2 /* ID given already */ -#define ROUTE_USED 3 /* All ID's used */ -#define ROUTE_ALLOCATE 4 /* Here it is */ -#define ROUTE_REQ_TOP 5 /* I bet you didn't expect.... - the Topological Inquisition */ -#define ROUTE_TOPOLOGY 6 /* Topology request answered FD */ -/******************************************************************* - * Define the Route Map Structure - * - * The route map gives a pointer to a Link Structure to use. - * This allows Disconnected Links to be checked quickly - ******************************************************************/ -typedef struct COST_ROUTE COST_ROUTE; -struct COST_ROUTE { - unsigned char cost; /* Cost down this link */ - unsigned char route[NODE_BYTES]; /* Nodes through this route */ -}; - -typedef struct ROUTE_STR ROUTE_STR; -struct ROUTE_STR { - COST_ROUTE cost_route[MAX_LINKS]; - /* cost / route for this link */ - ushort favoured; /* favoured link */ -}; - - -#define NO_LINK (short) 5 /* Link unattached */ -#define ROUTE_NO_ID (short) 100 /* No Id */ -#define ROUTE_DISCONNECT (ushort) 0xff /* Not connected */ -#define ROUTE_INTERCONNECT (ushort) 0x40 /* Sub-net interconnect */ - - -#define SYNC_RUP (ushort) 255 -#define COMMAND_RUP (ushort) 254 -#define ERROR_RUP (ushort) 253 -#define POLL_RUP (ushort) 252 -#define BOOT_RUP (ushort) 251 -#define ROUTE_RUP (ushort) 250 -#define STATUS_RUP (ushort) 249 -#define POWER_RUP (ushort) 248 - -#define HIGHEST_RUP (ushort) 255 /* Set to Top one */ -#define LOWEST_RUP (ushort) 248 /* Set to bottom one */ - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/rup.h b/drivers/char/rio/rup.h deleted file mode 100644 index 4ae90cb..0000000 --- a/drivers/char/rio/rup.h +++ /dev/null @@ -1,69 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* R U P S T R U C T U R E - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _rup_h -#define _rup_h 1 - -#define MAX_RUP ((short) 16) -#define PKTS_PER_RUP ((short) 2) /* They are always used in pairs */ - -/************************************************* - * Define all the packet request stuff - ************************************************/ -#define TX_RUP_INACTIVE 0 /* Nothing to transmit */ -#define TX_PACKET_READY 1 /* Transmit packet ready */ -#define TX_LOCK_RUP 2 /* Transmit side locked */ - -#define RX_RUP_INACTIVE 0 /* Nothing received */ -#define RX_PACKET_READY 1 /* Packet received */ - -#define RUP_NO_OWNER 0xff /* RUP not owned by any process */ - -struct RUP { - u16 txpkt; /* Outgoing packet */ - u16 rxpkt; /* Incoming packet */ - u16 link; /* Which link to send down? */ - u8 rup_dest_unit[2]; /* Destination unit */ - u16 handshake; /* For handshaking */ - u16 timeout; /* Timeout */ - u16 status; /* Status */ - u16 txcontrol; /* Transmit control */ - u16 rxcontrol; /* Receive control */ -}; - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/unixrup.h b/drivers/char/rio/unixrup.h deleted file mode 100644 index 7abf0cb..0000000 --- a/drivers/char/rio/unixrup.h +++ /dev/null @@ -1,51 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : unixrup.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:20 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)unixrup.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_unixrup_h__ -#define __rio_unixrup_h__ - -/* -** UnixRup data structure. This contains pointers to actual RUPs on the -** host card, and all the command/boot control stuff. -*/ -struct UnixRup { - struct CmdBlk *CmdsWaitingP; /* Commands waiting to be done */ - struct CmdBlk *CmdPendingP; /* The command currently being sent */ - struct RUP __iomem *RupP; /* the Rup to send it to */ - unsigned int Id; /* Id number */ - unsigned int BaseSysPort; /* SysPort of first tty on this RTA */ - unsigned int ModTypes; /* Modules on this RTA */ - spinlock_t RupLock; /* Lock structure for MPX */ - /* struct lockb RupLock; *//* Lock structure for MPX */ -}; - -#endif /* __rio_unixrup_h__ */ diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c deleted file mode 100644 index 3f47c2e..0000000 --- a/drivers/char/ser_a2232.c +++ /dev/null @@ -1,831 +0,0 @@ -/* drivers/char/ser_a2232.c */ - -/* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ - -/* Linux serial driver for the Amiga A2232 board */ - -/* This driver is MAINTAINED. Before applying any changes, please contact - * the author. - */ - -/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de> - * alias The A2232 driver project <A2232@gmx.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -/***************************** Documentation ************************/ -/* - * This driver is in EXPERIMENTAL state. That means I could not find - * someone with five A2232 boards with 35 ports running at 19200 bps - * at the same time and test the machine's behaviour. - * However, I know that you can performance-tweak this driver (see - * the source code). - * One thing to consider is the time this driver consumes during the - * Amiga's vertical blank interrupt. Everything that is to be done - * _IS DONE_ when entering the vertical blank interrupt handler of - * this driver. - * However, it would be more sane to only do the job for only ONE card - * instead of ALL cards at a time; or, more generally, to handle only - * SOME ports instead of ALL ports at a time. - * However, as long as no-one runs into problems I guess I shouldn't - * change the driver as it runs fine for me :) . - * - * Version history of this file: - * 0.4 Resolved licensing issues. - * 0.3 Inclusion in the Linux/m68k tree, small fixes. - * 0.2 Added documentation, minor typo fixes. - * 0.1 Initial release. - * - * TO DO: - * - Handle incoming BREAK events. I guess "Stevens: Advanced - * Programming in the UNIX(R) Environment" is a good reference - * on what is to be done. - * - When installing as a module, don't simply 'printk' text, but - * send it to the TTY used by the user. - * - * THANKS TO: - * - Jukka Marin (65EC02 code). - * - The other NetBSD developers on whose A2232 driver I had a - * pretty close look. However, I didn't copy any code so it - * is okay to put my code under the GPL and include it into - * Linux. - */ -/***************************** End of Documentation *****************/ - -/***************************** Defines ******************************/ -/* - * Enables experimental 115200 (normal) 230400 (turbo) baud rate. - * The A2232 specification states it can only operate at speeds up to - * 19200 bits per second, and I was not able to send a file via - * "sz"/"rz" and a null-modem cable from one A2232 port to another - * at 115200 bits per second. - * However, this might work for you. - */ -#undef A2232_SPEEDHACK -/* - * Default is not to use RTS/CTS so you could be talked to death. - */ -#define A2232_SUPPRESS_RTSCTS_WARNING -/************************* End of Defines ***************************/ - -/***************************** Includes *****************************/ -#include <linux/module.h> - -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/tty.h> - -#include <asm/setup.h> -#include <asm/amigaints.h> -#include <asm/amigahw.h> -#include <linux/zorro.h> -#include <asm/irq.h> -#include <linux/mutex.h> - -#include <linux/delay.h> - -#include <linux/serial.h> -#include <linux/generic_serial.h> -#include <linux/tty_flip.h> - -#include "ser_a2232.h" -#include "ser_a2232fw.h" -/************************* End of Includes **************************/ - -/***************************** Prototypes ***************************/ -/* The interrupt service routine */ -static irqreturn_t a2232_vbl_inter(int irq, void *data); -/* Initialize the port structures */ -static void a2232_init_portstructs(void); -/* Initialize and register TTY drivers. */ -/* returns 0 IFF successful */ -static int a2232_init_drivers(void); - -/* BEGIN GENERIC_SERIAL PROTOTYPES */ -static void a2232_disable_tx_interrupts(void *ptr); -static void a2232_enable_tx_interrupts(void *ptr); -static void a2232_disable_rx_interrupts(void *ptr); -static void a2232_enable_rx_interrupts(void *ptr); -static int a2232_carrier_raised(struct tty_port *port); -static void a2232_shutdown_port(void *ptr); -static int a2232_set_real_termios(void *ptr); -static int a2232_chars_in_buffer(void *ptr); -static void a2232_close(void *ptr); -static void a2232_hungup(void *ptr); -/* static void a2232_getserial (void *ptr, struct serial_struct *sp); */ -/* END GENERIC_SERIAL PROTOTYPES */ - -/* Functions that the TTY driver struct expects */ -static int a2232_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static void a2232_throttle(struct tty_struct *tty); -static void a2232_unthrottle(struct tty_struct *tty); -static int a2232_open(struct tty_struct * tty, struct file * filp); -/************************* End of Prototypes ************************/ - -/***************************** Global variables *********************/ -/*--------------------------------------------------------------------------- - * Interface from generic_serial.c back here - *--------------------------------------------------------------------------*/ -static struct real_driver a2232_real_driver = { - a2232_disable_tx_interrupts, - a2232_enable_tx_interrupts, - a2232_disable_rx_interrupts, - a2232_enable_rx_interrupts, - a2232_shutdown_port, - a2232_set_real_termios, - a2232_chars_in_buffer, - a2232_close, - a2232_hungup, - NULL /* a2232_getserial */ -}; - -static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own. - -/* Ports structs */ -static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES]; - -/* TTY driver structs */ -static struct tty_driver *a2232_driver; - -/* nr of cards completely (all ports) and correctly configured */ -static int nr_a2232; - -/* zorro_dev structs for the A2232's */ -static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS]; -/***************************** End of Global variables **************/ - -/* Helper functions */ - -static inline volatile struct a2232memory *a2232mem(unsigned int board) -{ - return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start); -} - -static inline volatile struct a2232status *a2232stat(unsigned int board, - unsigned int portonboard) -{ - volatile struct a2232memory *mem = a2232mem(board); - return &(mem->Status[portonboard]); -} - -static inline void a2232_receive_char(struct a2232_port *port, int ch, int err) -{ -/* Mostly stolen from other drivers. - Maybe one could implement a more efficient version by not only - transferring one character at a time. -*/ - struct tty_struct *tty = port->gs.port.tty; - -#if 0 - switch(err) { - case TTY_BREAK: - break; - case TTY_PARITY: - break; - case TTY_OVERRUN: - break; - case TTY_FRAME: - break; - } -#endif - - tty_insert_flip_char(tty, ch, err); - tty_flip_buffer_push(tty); -} - -/***************************** Functions ****************************/ -/*** BEGIN OF REAL_DRIVER FUNCTIONS ***/ - -static void a2232_disable_tx_interrupts(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - stat->OutDisable = -1; - - /* Does this here really have to be? */ - local_irq_save(flags); - port->gs.port.flags &= ~GS_TX_INTEN; - local_irq_restore(flags); -} - -static void a2232_enable_tx_interrupts(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - stat->OutDisable = 0; - - /* Does this here really have to be? */ - local_irq_save(flags); - port->gs.port.flags |= GS_TX_INTEN; - local_irq_restore(flags); -} - -static void a2232_disable_rx_interrupts(void *ptr) -{ - struct a2232_port *port; - port = ptr; - port->disable_rx = -1; -} - -static void a2232_enable_rx_interrupts(void *ptr) -{ - struct a2232_port *port; - port = ptr; - port->disable_rx = 0; -} - -static int a2232_carrier_raised(struct tty_port *port) -{ - struct a2232_port *ap = container_of(port, struct a2232_port, gs.port); - return ap->cd_status; -} - -static void a2232_shutdown_port(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *stat; - unsigned long flags; - - port = ptr; - stat = a2232stat(port->which_a2232, port->which_port_on_a2232); - - local_irq_save(flags); - - port->gs.port.flags &= ~GS_ACTIVE; - - if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { - /* Set DTR and RTS to Low, flush output. - The NetBSD driver "msc.c" does it this way. */ - stat->Command = ( (stat->Command & ~A2232CMD_CMask) | - A2232CMD_Close ); - stat->OutFlush = -1; - stat->Setup = -1; - } - - local_irq_restore(flags); - - /* After analyzing control flow, I think a2232_shutdown_port - is actually the last call from the system when at application - level someone issues a "echo Hello >>/dev/ttyY0". - Therefore I think the MOD_DEC_USE_COUNT should be here and - not in "a2232_close()". See the comment in "sx.c", too. - If you run into problems, compile this driver into the - kernel instead of compiling it as a module. */ -} - -static int a2232_set_real_termios(void *ptr) -{ - unsigned int cflag, baud, chsize, stopb, parity, softflow; - int rate; - int a2232_param, a2232_cmd; - unsigned long flags; - unsigned int i; - struct a2232_port *port = ptr; - volatile struct a2232status *status; - volatile struct a2232memory *mem; - - if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; - - status = a2232stat(port->which_a2232, port->which_port_on_a2232); - mem = a2232mem(port->which_a2232); - - a2232_param = a2232_cmd = 0; - - // get baud rate - baud = port->gs.baud; - if (baud == 0) { - /* speed == 0 -> drop DTR, do nothing else */ - local_irq_save(flags); - // Clear DTR (and RTS... mhhh). - status->Command = ( (status->Command & ~A2232CMD_CMask) | - A2232CMD_Close ); - status->OutFlush = -1; - status->Setup = -1; - - local_irq_restore(flags); - return 0; - } - - rate = A2232_BAUD_TABLE_NOAVAIL; - for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){ - if (a2232_baud_table[i] == baud){ - if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2]; - else rate = a2232_baud_table[i+1]; - } - } - if (rate == A2232_BAUD_TABLE_NOAVAIL){ - printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud); - // This is useful for both (turbo or normal) Crystal versions. - rate = A2232PARAM_B9600; - } - a2232_param |= rate; - - cflag = port->gs.port.tty->termios->c_cflag; - - // get character size - chsize = cflag & CSIZE; - switch (chsize){ - case CS8: a2232_param |= A2232PARAM_8Bit; break; - case CS7: a2232_param |= A2232PARAM_7Bit; break; - case CS6: a2232_param |= A2232PARAM_6Bit; break; - case CS5: a2232_param |= A2232PARAM_5Bit; break; - default: printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n", - port->which_a2232,port->which_port_on_a2232,chsize); - a2232_param |= A2232PARAM_8Bit; break; - } - - // get number of stop bits - stopb = cflag & CSTOPB; - if (stopb){ // two stop bits instead of one - printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n", - port->which_a2232,port->which_port_on_a2232); - } - - // Warn if RTS/CTS not wanted - if (!(cflag & CRTSCTS)){ -#ifndef A2232_SUPPRESS_RTSCTS_WARNING - printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n", - port->which_a2232,port->which_port_on_a2232); -#endif - } - - /* I think this is correct. - However, IXOFF means _input_ flow control and I wonder - if one should care about IXON _output_ flow control, - too. If this makes problems, one should turn the A2232 - firmware XON/XOFF "SoftFlow" flow control off and use - the conventional way of inserting START/STOP characters - by hand in throttle()/unthrottle(). - */ - softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF ); - - // get Parity (Enabled/Disabled? If Enabled, Odd or Even?) - parity = cflag & (PARENB | PARODD); - if (parity & PARENB){ - if (parity & PARODD){ - a2232_cmd |= A2232CMD_OddParity; - } - else{ - a2232_cmd |= A2232CMD_EvenParity; - } - } - else a2232_cmd |= A2232CMD_NoParity; - - - /* Hmm. Maybe an own a2232_port structure - member would be cleaner? */ - if (cflag & CLOCAL) - port->gs.port.flags &= ~ASYNC_CHECK_CD; - else - port->gs.port.flags |= ASYNC_CHECK_CD; - - - /* Now we have all parameters and can go to set them: */ - local_irq_save(flags); - - status->Param = a2232_param | A2232PARAM_RcvBaud; - status->Command = a2232_cmd | A2232CMD_Open | A2232CMD_Enable; - status->SoftFlow = softflow; - status->OutDisable = 0; - status->Setup = -1; - - local_irq_restore(flags); - return 0; -} - -static int a2232_chars_in_buffer(void *ptr) -{ - struct a2232_port *port; - volatile struct a2232status *status; - unsigned char ret; /* we need modulo-256 arithmetics */ - port = ptr; - status = a2232stat(port->which_a2232, port->which_port_on_a2232); -#if A2232_IOBUFLEN != 256 -#error "Re-Implement a2232_chars_in_buffer()!" -#endif - ret = (status->OutHead - status->OutTail); - return ret; -} - -static void a2232_close(void *ptr) -{ - a2232_disable_tx_interrupts(ptr); - a2232_disable_rx_interrupts(ptr); - /* see the comment in a2232_shutdown_port above. */ -} - -static void a2232_hungup(void *ptr) -{ - a2232_close(ptr); -} -/*** END OF REAL_DRIVER FUNCTIONS ***/ - -/*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ -static int a2232_ioctl( struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; -} - -static void a2232_throttle(struct tty_struct *tty) -{ -/* Throttle: System cannot take another chars: Drop RTS or - send the STOP char or whatever. - The A2232 firmware does RTS/CTS anyway, and XON/XOFF - if switched on. So the only thing we can do at this - layer here is not taking any characters out of the - A2232 buffer any more. */ - struct a2232_port *port = tty->driver_data; - port->throttle_input = -1; -} - -static void a2232_unthrottle(struct tty_struct *tty) -{ -/* Unthrottle: dual to "throttle()" above. */ - struct a2232_port *port = tty->driver_data; - port->throttle_input = 0; -} - -static int a2232_open(struct tty_struct * tty, struct file * filp) -{ -/* More or less stolen from other drivers. */ - int line; - int retval; - struct a2232_port *port; - - line = tty->index; - port = &a2232_ports[line]; - - tty->driver_data = port; - port->gs.port.tty = tty; - port->gs.port.count++; - retval = gs_init_port(&port->gs); - if (retval) { - port->gs.port.count--; - return retval; - } - port->gs.port.flags |= GS_ACTIVE; - retval = gs_block_til_ready(port, filp); - - if (retval) { - port->gs.port.count--; - return retval; - } - - a2232_enable_rx_interrupts(port); - - return 0; -} -/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ - -static irqreturn_t a2232_vbl_inter(int irq, void *data) -{ -#if A2232_IOBUFLEN != 256 -#error "Re-Implement a2232_vbl_inter()!" -#endif - -struct a2232_port *port; -volatile struct a2232memory *mem; -volatile struct a2232status *status; -unsigned char newhead; -unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */ -unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */ -volatile u_char *ibuf, *cbuf, *obuf; -int ch, err, n, p; - for (n = 0; n < nr_a2232; n++){ /* for every completely initialized A2232 board */ - mem = a2232mem(n); - for (p = 0; p < NUMLINES; p++){ /* for every port on this board */ - err = 0; - port = &a2232_ports[n*NUMLINES+p]; - if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */ - - status = a2232stat(n,p); - - if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */ - newhead = status->InHead; /* 65EC02 write pointer */ - bufpos = status->InTail; - - /* check for input for this port */ - if (newhead != bufpos) { - /* buffer for input chars/events */ - ibuf = mem->InBuf[p]; - - /* data types of bytes in ibuf */ - cbuf = mem->InCtl[p]; - - /* do for all chars */ - while (bufpos != newhead) { - /* which type of input data? */ - switch (cbuf[bufpos]) { - /* switch on input event (CD, BREAK, etc.) */ - case A2232INCTL_EVENT: - switch (ibuf[bufpos++]) { - case A2232EVENT_Break: - /* TODO: Handle BREAK signal */ - break; - /* A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are - handled in a separate queue and should not occur here. */ - case A2232EVENT_Sync: - printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring."); - break; - default: - printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]); - } /* event type switch */ - break; - case A2232INCTL_CHAR: - /* Receive incoming char */ - a2232_receive_char(port, ibuf[bufpos], err); - bufpos++; - break; - default: - printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]); - bufpos++; - } /* switch on input data type */ - } /* while there's something in the buffer */ - - status->InTail = bufpos; /* tell 65EC02 what we've read */ - - } /* if there was something in the buffer */ - } /* If input is not disabled */ - - /* Now check if there's something to output */ - obuf = mem->OutBuf[p]; - bufpos = status->OutHead; - while ( (port->gs.xmit_cnt > 0) && - (!port->gs.port.tty->stopped) && - (!port->gs.port.tty->hw_stopped) ){ /* While there are chars to transmit */ - if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */ - ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */ - port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */ - obuf[bufpos++] = ch; /* put it into the A2232 buffer */ - port->gs.xmit_cnt--; - } - else{ /* If A2232 the buffer is full */ - break; /* simply stop filling it. */ - } - } - status->OutHead = bufpos; - - /* WakeUp if output buffer runs low */ - if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { - tty_wakeup(port->gs.port.tty); - } - } // if the port is used - } // for every port on the board - - /* Now check the CD message queue */ - newhead = mem->Common.CDHead; - bufpos = mem->Common.CDTail; - if (newhead != bufpos){ /* There are CD events in queue */ - ocd = mem->Common.CDStatus; /* get old status bits */ - while (newhead != bufpos){ /* read all events */ - ncd = mem->CDBuf[bufpos++]; /* get one event */ - ccd = ncd ^ ocd; /* mask of changed lines */ - ocd = ncd; /* save new status bits */ - for(p=0; p < NUMLINES; p++){ /* for all ports */ - if (ccd & 1){ /* this one changed */ - - struct a2232_port *port = &a2232_ports[n*7+p]; - port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */ - - if (!(port->gs.port.flags & ASYNC_CHECK_CD)) - ; /* Don't report DCD changes */ - else if (port->cd_status) { // if DCD on: DCD went UP! - - /* Are we blocking in open?*/ - wake_up_interruptible(&port->gs.port.open_wait); - } - else { // if DCD off: DCD went DOWN! - if (port->gs.port.tty) - tty_hangup (port->gs.port.tty); - } - - } // if CD changed for this port - ccd >>= 1; - ncd >>= 1; /* Shift bits for next line */ - } // for every port - } // while CD events in queue - mem->Common.CDStatus = ocd; /* save new status */ - mem->Common.CDTail = bufpos; /* remove events */ - } // if events in CD queue - - } // for every completely initialized A2232 board - return IRQ_HANDLED; -} - -static const struct tty_port_operations a2232_port_ops = { - .carrier_raised = a2232_carrier_raised, -}; - -static void a2232_init_portstructs(void) -{ - struct a2232_port *port; - int i; - - for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { - port = a2232_ports + i; - tty_port_init(&port->gs.port); - port->gs.port.ops = &a2232_port_ops; - port->which_a2232 = i/NUMLINES; - port->which_port_on_a2232 = i%NUMLINES; - port->disable_rx = port->throttle_input = port->cd_status = 0; - port->gs.magic = A2232_MAGIC; - port->gs.close_delay = HZ/2; - port->gs.closing_wait = 30 * HZ; - port->gs.rd = &a2232_real_driver; - } -} - -static const struct tty_operations a2232_ops = { - .open = a2232_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = a2232_ioctl, - .throttle = a2232_throttle, - .unthrottle = a2232_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, -}; - -static int a2232_init_drivers(void) -{ - int error; - - a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232); - if (!a2232_driver) - return -ENOMEM; - a2232_driver->owner = THIS_MODULE; - a2232_driver->driver_name = "commodore_a2232"; - a2232_driver->name = "ttyY"; - a2232_driver->major = A2232_NORMAL_MAJOR; - a2232_driver->type = TTY_DRIVER_TYPE_SERIAL; - a2232_driver->subtype = SERIAL_TYPE_NORMAL; - a2232_driver->init_termios = tty_std_termios; - a2232_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - a2232_driver->init_termios.c_ispeed = 9600; - a2232_driver->init_termios.c_ospeed = 9600; - a2232_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(a2232_driver, &a2232_ops); - if ((error = tty_register_driver(a2232_driver))) { - printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n", - error); - put_tty_driver(a2232_driver); - return 1; - } - return 0; -} - -static int __init a2232board_init(void) -{ - struct zorro_dev *z; - - unsigned int boardaddr; - int bcount; - short start; - u_char *from; - volatile u_char *to; - volatile struct a2232memory *mem; - int error, i; - -#ifdef CONFIG_SMP - return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */ -#endif - - if (!MACH_IS_AMIGA){ - return -ENODEV; - } - - printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */ - - z = NULL; - nr_a2232 = 0; - while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){ - if ( (z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) && - (z->id != ZORRO_PROD_CBM_A2232) ){ - continue; // The board found was no A2232 - } - if (!zorro_request_device(z,"A2232 driver")) - continue; - - printk("Commodore A2232 found (#%d).\n",nr_a2232); - - zd_a2232[nr_a2232] = z; - - boardaddr = ZTWO_VADDR( z->resource.start ); - printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start))); - - mem = (volatile struct a2232memory *) boardaddr; - - (void) mem->Enable6502Reset; /* copy the code across to the board */ - to = (u_char *)mem; from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2; - start = *(short *)from; - from += sizeof(start); - to += start; - while(bcount--) *to++ = *from++; - printk("65EC02 software uploaded to the A2232 memory.\n"); - - mem->Common.Crystal = A2232_UNKNOWN; /* use automatic speed check */ - - /* start 6502 running */ - (void) mem->ResetBoard; - printk("A2232's 65EC02 CPU up and running.\n"); - - /* wait until speed detector has finished */ - for (bcount = 0; bcount < 2000; bcount++) { - udelay(1000); - if (mem->Common.Crystal) - break; - } - printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: ")); - switch (mem->Common.Crystal){ - case A2232_UNKNOWN: - printk("Unknown crystal.\n"); - break; - case A2232_NORMAL: - printk ("Normal crystal.\n"); - break; - case A2232_TURBO: - printk ("Turbo crystal.\n"); - break; - default: - printk ("0x%x. Huh?\n",mem->Common.Crystal); - } - - nr_a2232++; - - } - - printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */ - - a2232_init_portstructs(); - - /* - a2232_init_drivers also registers the drivers. Must be here because all boards - have to be detected first. - */ - if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx? - - error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, - "A2232 serial VBL", a2232_driver_ID); - if (error) { - for (i = 0; i < nr_a2232; i++) - zorro_release_device(zd_a2232[i]); - tty_unregister_driver(a2232_driver); - put_tty_driver(a2232_driver); - } - return error; -} - -static void __exit a2232board_exit(void) -{ - int i; - - for (i = 0; i < nr_a2232; i++) { - zorro_release_device(zd_a2232[i]); - } - - tty_unregister_driver(a2232_driver); - put_tty_driver(a2232_driver); - free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID); -} - -module_init(a2232board_init); -module_exit(a2232board_exit); - -MODULE_AUTHOR("Enver Haase"); -MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/char/ser_a2232.h b/drivers/char/ser_a2232.h deleted file mode 100644 index bc09eb9..0000000 --- a/drivers/char/ser_a2232.h +++ /dev/null @@ -1,202 +0,0 @@ -/* drivers/char/ser_a2232.h */ - -/* $Id: ser_a2232.h,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ - -/* Linux serial driver for the Amiga A2232 board */ - -/* This driver is MAINTAINED. Before applying any changes, please contact - * the author. - */ - -/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de> - * alias The A2232 driver project <A2232@gmx.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef _SER_A2232_H_ -#define _SER_A2232_H_ - -/* - How many boards are to be supported at maximum; - "up to five A2232 Multiport Serial Cards may be installed in a - single Amiga 2000" states the A2232 User's Guide. If you have - more slots available, you might want to change the value below. -*/ -#define MAX_A2232_BOARDS 5 - -#ifndef A2232_NORMAL_MAJOR -/* This allows overriding on the compiler commandline, or in a "major.h" - include or something like that */ -#define A2232_NORMAL_MAJOR 224 /* /dev/ttyY* */ -#define A2232_CALLOUT_MAJOR 225 /* /dev/cuy* */ -#endif - -/* Some magic is always good - Who knows :) */ -#define A2232_MAGIC 0x000a2232 - -/* A2232 port structure to keep track of the - status of every single line used */ -struct a2232_port{ - struct gs_port gs; - unsigned int which_a2232; - unsigned int which_port_on_a2232; - short disable_rx; - short throttle_input; - short cd_status; -}; - -#define NUMLINES 7 /* number of lines per board */ -#define A2232_IOBUFLEN 256 /* number of bytes per buffer */ -#define A2232_IOBUFLENMASK 0xff /* mask for maximum number of bytes */ - - -#define A2232_UNKNOWN 0 /* crystal not known */ -#define A2232_NORMAL 1 /* normal A2232 (1.8432 MHz oscillator) */ -#define A2232_TURBO 2 /* turbo A2232 (3.6864 MHz oscillator) */ - - -struct a2232common { - char Crystal; /* normal (1) or turbo (2) board? */ - u_char Pad_a; - u_char TimerH; /* timer value after speed check */ - u_char TimerL; - u_char CDHead; /* head pointer for CD message queue */ - u_char CDTail; /* tail pointer for CD message queue */ - u_char CDStatus; - u_char Pad_b; -}; - -struct a2232status { - u_char InHead; /* input queue head */ - u_char InTail; /* input queue tail */ - u_char OutDisable; /* disables output */ - u_char OutHead; /* output queue head */ - u_char OutTail; /* output queue tail */ - u_char OutCtrl; /* soft flow control character to send */ - u_char OutFlush; /* flushes output buffer */ - u_char Setup; /* causes reconfiguration */ - u_char Param; /* parameter byte - see A2232PARAM */ - u_char Command; /* command byte - see A2232CMD */ - u_char SoftFlow; /* enables xon/xoff flow control */ - /* private 65EC02 fields: */ - u_char XonOff; /* stores XON/XOFF enable/disable */ -}; - -#define A2232_MEMPAD1 \ - (0x0200 - NUMLINES * sizeof(struct a2232status) - \ - sizeof(struct a2232common)) -#define A2232_MEMPAD2 (0x2000 - NUMLINES * A2232_IOBUFLEN - A2232_IOBUFLEN) - -struct a2232memory { - struct a2232status Status[NUMLINES]; /* 0x0000-0x006f status areas */ - struct a2232common Common; /* 0x0070-0x0077 common flags */ - u_char Dummy1[A2232_MEMPAD1]; /* 0x00XX-0x01ff */ - u_char OutBuf[NUMLINES][A2232_IOBUFLEN];/* 0x0200-0x08ff output bufs */ - u_char InBuf[NUMLINES][A2232_IOBUFLEN]; /* 0x0900-0x0fff input bufs */ - u_char InCtl[NUMLINES][A2232_IOBUFLEN]; /* 0x1000-0x16ff control data */ - u_char CDBuf[A2232_IOBUFLEN]; /* 0x1700-0x17ff CD event buffer */ - u_char Dummy2[A2232_MEMPAD2]; /* 0x1800-0x2fff */ - u_char Code[0x1000]; /* 0x3000-0x3fff code area */ - u_short InterruptAck; /* 0x4000 intr ack */ - u_char Dummy3[0x3ffe]; /* 0x4002-0x7fff */ - u_short Enable6502Reset; /* 0x8000 Stop board, */ - /* 6502 RESET line held low */ - u_char Dummy4[0x3ffe]; /* 0x8002-0xbfff */ - u_short ResetBoard; /* 0xc000 reset board & run, */ - /* 6502 RESET line held high */ -}; - -#undef A2232_MEMPAD1 -#undef A2232_MEMPAD2 - -#define A2232INCTL_CHAR 0 /* corresponding byte in InBuf is a character */ -#define A2232INCTL_EVENT 1 /* corresponding byte in InBuf is an event */ - -#define A2232EVENT_Break 1 /* break set */ -#define A2232EVENT_CarrierOn 2 /* carrier raised */ -#define A2232EVENT_CarrierOff 3 /* carrier dropped */ -#define A2232EVENT_Sync 4 /* don't know, defined in 2232.ax */ - -#define A2232CMD_Enable 0x1 /* enable/DTR bit */ -#define A2232CMD_Close 0x2 /* close the device */ -#define A2232CMD_Open 0xb /* open the device */ -#define A2232CMD_CMask 0xf /* command mask */ -#define A2232CMD_RTSOff 0x0 /* turn off RTS */ -#define A2232CMD_RTSOn 0x8 /* turn on RTS */ -#define A2232CMD_Break 0xd /* transmit a break */ -#define A2232CMD_RTSMask 0xc /* mask for RTS stuff */ -#define A2232CMD_NoParity 0x00 /* don't use parity */ -#define A2232CMD_OddParity 0x20 /* odd parity */ -#define A2232CMD_EvenParity 0x60 /* even parity */ -#define A2232CMD_ParityMask 0xe0 /* parity mask */ - -#define A2232PARAM_B115200 0x0 /* baud rates */ -#define A2232PARAM_B50 0x1 -#define A2232PARAM_B75 0x2 -#define A2232PARAM_B110 0x3 -#define A2232PARAM_B134 0x4 -#define A2232PARAM_B150 0x5 -#define A2232PARAM_B300 0x6 -#define A2232PARAM_B600 0x7 -#define A2232PARAM_B1200 0x8 -#define A2232PARAM_B1800 0x9 -#define A2232PARAM_B2400 0xa -#define A2232PARAM_B3600 0xb -#define A2232PARAM_B4800 0xc -#define A2232PARAM_B7200 0xd -#define A2232PARAM_B9600 0xe -#define A2232PARAM_B19200 0xf -#define A2232PARAM_BaudMask 0xf /* baud rate mask */ -#define A2232PARAM_RcvBaud 0x10 /* enable receive baud rate */ -#define A2232PARAM_8Bit 0x00 /* numbers of bits */ -#define A2232PARAM_7Bit 0x20 -#define A2232PARAM_6Bit 0x40 -#define A2232PARAM_5Bit 0x60 -#define A2232PARAM_BitMask 0x60 /* numbers of bits mask */ - - -/* Standard speeds tables, -1 means unavailable, -2 means 0 baud: switch off line */ -#define A2232_BAUD_TABLE_NOAVAIL -1 -#define A2232_BAUD_TABLE_NUM_RATES (18) -static int a2232_baud_table[A2232_BAUD_TABLE_NUM_RATES*3] = { - //Baud //Normal //Turbo - 50, A2232PARAM_B50, A2232_BAUD_TABLE_NOAVAIL, - 75, A2232PARAM_B75, A2232_BAUD_TABLE_NOAVAIL, - 110, A2232PARAM_B110, A2232_BAUD_TABLE_NOAVAIL, - 134, A2232PARAM_B134, A2232_BAUD_TABLE_NOAVAIL, - 150, A2232PARAM_B150, A2232PARAM_B75, - 200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, - 300, A2232PARAM_B300, A2232PARAM_B150, - 600, A2232PARAM_B600, A2232PARAM_B300, - 1200, A2232PARAM_B1200, A2232PARAM_B600, - 1800, A2232PARAM_B1800, A2232_BAUD_TABLE_NOAVAIL, - 2400, A2232PARAM_B2400, A2232PARAM_B1200, - 4800, A2232PARAM_B4800, A2232PARAM_B2400, - 9600, A2232PARAM_B9600, A2232PARAM_B4800, - 19200, A2232PARAM_B19200, A2232PARAM_B9600, - 38400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B19200, - 57600, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, -#ifdef A2232_SPEEDHACK - 115200, A2232PARAM_B115200, A2232_BAUD_TABLE_NOAVAIL, - 230400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B115200 -#else - 115200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, - 230400, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL -#endif -}; -#endif diff --git a/drivers/char/ser_a2232fw.ax b/drivers/char/ser_a2232fw.ax deleted file mode 100644 index 7364380..0000000 --- a/drivers/char/ser_a2232fw.ax +++ /dev/null @@ -1,529 +0,0 @@ -;.lib "axm" -; -;begin -;title "A2232 serial board driver" -; -;set modules "2232" -;set executable "2232.bin" -; -;;;;set nolink -; -;set temporary directory "t:" -; -;set assembly options "-m6502 -l60:t:list" -;set link options "bin"; loadadr" -;;;bin2c 2232.bin msc6502.h msc6502code -;end -; -; -; ### Commodore A2232 serial board driver for NetBSD by JM v1.3 ### -; -; - Created 950501 by JM - -; -; -; Serial board driver software. -; -; -% Copyright (c) 1995 Jukka Marin <jmarin@jmp.fi>. -% All rights reserved. -% -% Redistribution and use in source and binary forms, with or without -% modification, are permitted provided that the following conditions -% are met: -% 1. Redistributions of source code must retain the above copyright -% notice, and the entire permission notice in its entirety, -% including the disclaimer of warranties. -% 2. Redistributions in binary form must reproduce the above copyright -% notice, this list of conditions and the following disclaimer in the -% documentation and/or other materials provided with the distribution. -% 3. The name of the author may not be used to endorse or promote -% products derived from this software without specific prior -% written permission. -% -% ALTERNATIVELY, this product may be distributed under the terms of -% the GNU General Public License, in which case the provisions of the -% GPL are required INSTEAD OF the above restrictions. (This clause is -% necessary due to a potential bad interaction between the GPL and -% the restrictions contained in a BSD-style copyright.) -% -% THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED -% WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -% OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -% DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, -% INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -% (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -% SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -% HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -% STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED -% OF THE POSSIBILITY OF SUCH DAMAGE. -; -; -; Bugs: -; -; - Can't send a break yet -; -; -; -; Edited: -; -; - 950501 by JM -> v0.1 - Created this file. -; - 951029 by JM -> v1.3 - Carrier Detect events now queued in a separate -; queue. -; -; - - -CODE equ $3800 ; start address for program code - - -CTL_CHAR equ $00 ; byte in ibuf is a character -CTL_EVENT equ $01 ; byte in ibuf is an event - -EVENT_BREAK equ $01 -EVENT_CDON equ $02 -EVENT_CDOFF equ $03 -EVENT_SYNC equ $04 - -XON equ $11 -XOFF equ $13 - - -VARBASE macro *starting_address ; was VARINIT -_varbase set \1 - endm - -VARDEF macro *name space_needs -\1 equ _varbase -_varbase set _varbase+\2 - endm - - -stz macro * address - db $64,\1 - endm - -stzax macro * address - db $9e,<\1,>\1 - endm - - -biti macro * immediate value - db $89,\1 - endm - -smb0 macro * address - db $87,\1 - endm -smb1 macro * address - db $97,\1 - endm -smb2 macro * address - db $a7,\1 - endm -smb3 macro * address - db $b7,\1 - endm -smb4 macro * address - db $c7,\1 - endm -smb5 macro * address - db $d7,\1 - endm -smb6 macro * address - db $e7,\1 - endm -smb7 macro * address - db $f7,\1 - endm - - - -;-----------------------------------------------------------------------; -; ; -; stuff common for all ports, non-critical (run once / loop) ; -; ; -DO_SLOW macro * port_number ; - .local ; ; - lda CIA+C_PA ; check all CD inputs ; - cmp CommonCDo ; changed from previous accptd? ; - beq =over ; nope, do nothing else here ; - ; ; - cmp CommonCDb ; bouncing? ; - beq =nobounce ; nope -> ; - ; ; - sta CommonCDb ; save current state ; - lda #64 ; reinitialize counter ; - sta CommonCDc ; ; - jmp =over ; skip CD save ; - ; ; -=nobounce dec CommonCDc ; no, decrement bounce counter ; - bpl =over ; not done yet, so skip CD save ; - ; ; -=saveCD ldx CDHead ; get write index ; - sta cdbuf,x ; save status in buffer ; - inx ; ; - cpx CDTail ; buffer full? ; - .if ne ; no: preserve status: ; - stx CDHead ; update index in RAM ; - sta CommonCDo ; save state for the next check ; - .end ; ; -=over .end local ; - endm ; - ; -;-----------------------------------------------------------------------; - - -; port specific stuff (no data transfer) - -DO_PORT macro * port_number - .local ; ; - lda SetUp\1 ; reconfiguration request? ; - .if ne ; yes: ; - lda SoftFlow\1 ; get XON/XOFF flag ; - sta XonOff\1 ; save it ; - lda Param\1 ; get parameter ; - ora #%00010000 ; use baud generator for Rx ; - sta ACIA\1+A_CTRL ; store in control register ; - stz OutDisable\1 ; enable transmit output ; - stz SetUp\1 ; no reconfiguration no more ; - .end ; ; - ; ; - lda InHead\1 ; get write index ; - sbc InTail\1 ; buffer full soon? ; - cmp #200 ; 200 chars or more in buffer? ; - lda Command\1 ; get Command reg value ; - and #%11110011 ; turn RTS OFF by default ; - .if cc ; still room in buffer: ; - ora #%00001000 ; turn RTS ON ; - .end ; ; - sta ACIA\1+A_CMD ; set/clear RTS ; - ; ; - lda OutFlush\1 ; request to flush output buffer; - .if ne ; yessh! ; - lda OutHead\1 ; get head ; - sta OutTail\1 ; save as tail ; - stz OutDisable\1 ; enable transmit output ; - stz OutFlush\1 ; clear request ; - .end - .end local - endm - - -DO_DATA macro * port number - .local - lda ACIA\1+A_SR ; read ACIA status register ; - biti [1<<3] ; something received? ; - .if ne ; yes: ; - biti [1<<1] ; framing error? ; - .if ne ; yes: ; - lda ACIA\1+A_DATA ; read received character ; - bne =SEND ; not break -> ignore it ; - ldx InHead\1 ; get write pointer ; - lda #CTL_EVENT ; get type of byte ; - sta ictl\1,x ; save it in InCtl buffer ; - lda #EVENT_BREAK ; event code ; - sta ibuf\1,x ; save it as well ; - inx ; ; - cpx InTail\1 ; still room in buffer? ; - .if ne ; absolutely: ; - stx InHead\1 ; update index in memory ; - .end ; ; - jmp =SEND ; go check if anything to send ; - .end ; ; - ; normal char received: ; - ldx InHead\1 ; get write index ; - lda ACIA\1+A_DATA ; read received character ; - sta ibuf\1,x ; save char in buffer ; - stzax ictl\1 ; set type to CTL_CHAR ; - inx ; ; - cpx InTail\1 ; buffer full? ; - .if ne ; no: preserve character: ; - stx InHead\1 ; update index in RAM ; - .end ; ; - and #$7f ; mask off parity if any ; - cmp #XOFF ; XOFF from remote host? ; - .if eq ; yes: ; - lda XonOff\1 ; if XON/XOFF handshaking.. ; - sta OutDisable\1 ; ..disable transmitter ; - .end ; ; - .end ; ; - ; ; - ; BUFFER FULL CHECK WAS HERE ; - ; ; -=SEND lda ACIA\1+A_SR ; transmit register empty? ; - and #[1<<4] ; ; - .if ne ; yes: ; - ldx OutCtrl\1 ; sending out XON/XOFF? ; - .if ne ; yes: ; - lda CIA+C_PB ; check CTS signal ; - and #[1<<\1] ; (for this port only) ; - bne =DONE ; not allowed to send -> done ; - stx ACIA\1+A_DATA ; transmit control char ; - stz OutCtrl\1 ; clear flag ; - jmp =DONE ; and we're done ; - .end ; ; - ; ; - ldx OutTail\1 ; anything to transmit? ; - cpx OutHead\1 ; ; - .if ne ; yes: ; - lda OutDisable\1 ; allowed to transmit? ; - .if eq ; yes: ; - lda CIA+C_PB ; check CTS signal ; - and #[1<<\1] ; (for this port only) ; - bne =DONE ; not allowed to send -> done ; - lda obuf\1,x ; get a char from buffer ; - sta ACIA\1+A_DATA ; send it away ; - inc OutTail\1 ; update read index ; - .end ; ; - .end ; ; - .end ; ; -=DONE .end local - endm - - - -PORTVAR macro * port number - VARDEF InHead\1 1 - VARDEF InTail\1 1 - VARDEF OutDisable\1 1 - VARDEF OutHead\1 1 - VARDEF OutTail\1 1 - VARDEF OutCtrl\1 1 - VARDEF OutFlush\1 1 - VARDEF SetUp\1 1 - VARDEF Param\1 1 - VARDEF Command\1 1 - VARDEF SoftFlow\1 1 - ; private: - VARDEF XonOff\1 1 - endm - - - VARBASE 0 ; start variables at address $0000 - PORTVAR 0 ; define variables for port 0 - PORTVAR 1 ; define variables for port 1 - PORTVAR 2 ; define variables for port 2 - PORTVAR 3 ; define variables for port 3 - PORTVAR 4 ; define variables for port 4 - PORTVAR 5 ; define variables for port 5 - PORTVAR 6 ; define variables for port 6 - - - - VARDEF Crystal 1 ; 0 = unknown, 1 = normal, 2 = turbo - VARDEF Pad_a 1 - VARDEF TimerH 1 - VARDEF TimerL 1 - VARDEF CDHead 1 - VARDEF CDTail 1 - VARDEF CDStatus 1 - VARDEF Pad_b 1 - - VARDEF CommonCDo 1 ; for carrier detect optimization - VARDEF CommonCDc 1 ; for carrier detect debouncing - VARDEF CommonCDb 1 ; for carrier detect debouncing - - - VARBASE $0200 - VARDEF obuf0 256 ; output data (characters only) - VARDEF obuf1 256 - VARDEF obuf2 256 - VARDEF obuf3 256 - VARDEF obuf4 256 - VARDEF obuf5 256 - VARDEF obuf6 256 - - VARDEF ibuf0 256 ; input data (characters, events etc - see ictl) - VARDEF ibuf1 256 - VARDEF ibuf2 256 - VARDEF ibuf3 256 - VARDEF ibuf4 256 - VARDEF ibuf5 256 - VARDEF ibuf6 256 - - VARDEF ictl0 256 ; input control information (type of data in ibuf) - VARDEF ictl1 256 - VARDEF ictl2 256 - VARDEF ictl3 256 - VARDEF ictl4 256 - VARDEF ictl5 256 - VARDEF ictl6 256 - - VARDEF cdbuf 256 ; CD event queue - - -ACIA0 equ $4400 -ACIA1 equ $4c00 -ACIA2 equ $5400 -ACIA3 equ $5c00 -ACIA4 equ $6400 -ACIA5 equ $6c00 -ACIA6 equ $7400 - -A_DATA equ $00 -A_SR equ $02 -A_CMD equ $04 -A_CTRL equ $06 -; 00 write transmit data read received data -; 02 reset ACIA read status register -; 04 write command register read command register -; 06 write control register read control register - -CIA equ $7c00 ; 8520 CIA -C_PA equ $00 ; port A data register -C_PB equ $02 ; port B data register -C_DDRA equ $04 ; data direction register for port A -C_DDRB equ $06 ; data direction register for port B -C_TAL equ $08 ; timer A -C_TAH equ $0a -C_TBL equ $0c ; timer B -C_TBH equ $0e -C_TODL equ $10 ; TOD LSB -C_TODM equ $12 ; TOD middle byte -C_TODH equ $14 ; TOD MSB -C_DATA equ $18 ; serial data register -C_INTCTRL equ $1a ; interrupt control register -C_CTRLA equ $1c ; control register A -C_CTRLB equ $1e ; control register B - - - - - - section main,code,CODE-2 - - db >CODE,<CODE - -;-----------------------------------------------------------------------; -; here's the initialization code: ; -; ; -R_RESET ldx #$ff ; - txs ; initialize stack pointer ; - cld ; in case a 6502 is used... ; - ldx #0 ; ; - lda #0 ; ; - ldy #Crystal ; this many bytes to clear ; -clr_loop sta 0,x ; clear zero page variables ; - inx ; ; - dey ; ; - bne clr_loop ; ; - ; ; - stz CommonCDo ; force CD test at boot ; - stz CommonCDb ; ; - stz CDHead ; clear queue ; - stz CDTail ; ; - ; ; - lda #0 ; ; - sta Pad_a ; ; - lda #170 ; test cmp ; - cmp #100 ; ; - .if cs ; ; - inc Pad_a ; C was set ; - .end ; ; - ; -;-----------------------------------------------------------------------; -; Speed check ; -;-----------------------------------------------------------------------; - ; - lda Crystal ; speed already set? ; - beq DoSpeedy ; ; - jmp LOOP ; yes, skip speed test ; - ; ; -DoSpeedy lda #%10011000 ; 8N1, 1200/2400 bps ; - sta ACIA0+A_CTRL ; ; - lda #%00001011 ; enable DTR ; - sta ACIA0+A_CMD ; ; - lda ACIA0+A_SR ; read status register ; - ; ; - lda #%10000000 ; disable all ints (unnecessary); - sta CIA+C_INTCTRL ; ; - lda #255 ; program the timer ; - sta CIA+C_TAL ; ; - sta CIA+C_TAH ; ; - ; ; - ldx #0 ; ; - stx ACIA0+A_DATA ; transmit a zero ; - nop ; ; - nop ; ; - lda ACIA0+A_SR ; read status ; - nop ; ; - nop ; ; - stx ACIA0+A_DATA ; transmit a zero ; -Speedy1 lda ACIA0+A_SR ; read status ; - and #[1<<4] ; transmit data reg empty? ; - beq Speedy1 ; not yet, wait more ; - ; ; - lda #%00010001 ; load & start the timer ; - stx ACIA0+A_DATA ; transmit one more zero ; - sta CIA+C_CTRLA ; ; -Speedy2 lda ACIA0+A_SR ; read status ; - and #[1<<4] ; transmit data reg empty? ; - beq Speedy2 ; not yet, wait more ; - stx CIA+C_CTRLA ; stop the timer ; - ; ; - lda CIA+C_TAL ; copy timer value for 68k ; - sta TimerL ; ; - lda CIA+C_TAH ; ; - sta TimerH ; ; - cmp #$d0 ; turbo or normal? ; - .if cs ; ; - lda #2 ; turbo! :-) ; - .else ; ; - lda #1 ; normal :-( ; - .end ; ; - sta Crystal ; ; - lda #0 ; ; - sta ACIA0+A_SR ; ; - sta ACIA0+A_CTRL ; reset UART ; - sta ACIA0+A_CMD ; ; - ; - jmp LOOP ; - ; -; ; -;-----------------------------------------------------------------------; -; ; -; The Real Thing: ; -; ; -LOOP DO_SLOW ; do non-critical things ; - jsr do_input ; check for received data - DO_PORT 0 - jsr do_input - DO_PORT 1 - jsr do_input - DO_PORT 2 - jsr do_input - DO_PORT 3 - jsr do_input - DO_PORT 4 - jsr do_input - DO_PORT 5 - jsr do_input - DO_PORT 6 - jsr do_input - jmp LOOP - - -do_input DO_DATA 0 - DO_DATA 1 - DO_DATA 2 - DO_DATA 3 - DO_DATA 4 - DO_DATA 5 - DO_DATA 6 - rts - - -;-----------------------------------------------------------------------; - section vectors,data,$3ffa - dw $d0d0 - dw R_RESET - dw $c0ce -;-----------------------------------------------------------------------; - - - - end - - - diff --git a/drivers/char/ser_a2232fw.h b/drivers/char/ser_a2232fw.h deleted file mode 100644 index e09a30a..0000000 --- a/drivers/char/ser_a2232fw.h +++ /dev/null @@ -1,306 +0,0 @@ -/* drivers/char/ser_a2232fw.h */ - -/* $Id: ser_a2232fw.h,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ - -/* - * Copyright (c) 1995 Jukka Marin <jmarin@jmp.fi>. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, and the entire permission notice in its entirety, - * including the disclaimer of warranties. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote - * products derived from this software without specific prior - * written permission. - * - * ALTERNATIVELY, this product may be distributed under the terms of - * the GNU Public License, in which case the provisions of the GPL are - * required INSTEAD OF the above restrictions. (This clause is - * necessary due to a potential bad interaction between the GPL and - * the restrictions contained in a BSD-style copyright.) - * - * THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - -/* This is the 65EC02 code by Jukka Marin that is executed by - the A2232's 65EC02 processor (base address: 0x3800) - Source file: ser_a2232fw.ax - Version: 1.3 (951029) - Known Bugs: Cannot send a break yet -*/ -static unsigned char a2232_65EC02code[] = { - 0x38, 0x00, 0xA2, 0xFF, 0x9A, 0xD8, 0xA2, 0x00, - 0xA9, 0x00, 0xA0, 0x54, 0x95, 0x00, 0xE8, 0x88, - 0xD0, 0xFA, 0x64, 0x5C, 0x64, 0x5E, 0x64, 0x58, - 0x64, 0x59, 0xA9, 0x00, 0x85, 0x55, 0xA9, 0xAA, - 0xC9, 0x64, 0x90, 0x02, 0xE6, 0x55, 0xA5, 0x54, - 0xF0, 0x03, 0x4C, 0x92, 0x38, 0xA9, 0x98, 0x8D, - 0x06, 0x44, 0xA9, 0x0B, 0x8D, 0x04, 0x44, 0xAD, - 0x02, 0x44, 0xA9, 0x80, 0x8D, 0x1A, 0x7C, 0xA9, - 0xFF, 0x8D, 0x08, 0x7C, 0x8D, 0x0A, 0x7C, 0xA2, - 0x00, 0x8E, 0x00, 0x44, 0xEA, 0xEA, 0xAD, 0x02, - 0x44, 0xEA, 0xEA, 0x8E, 0x00, 0x44, 0xAD, 0x02, - 0x44, 0x29, 0x10, 0xF0, 0xF9, 0xA9, 0x11, 0x8E, - 0x00, 0x44, 0x8D, 0x1C, 0x7C, 0xAD, 0x02, 0x44, - 0x29, 0x10, 0xF0, 0xF9, 0x8E, 0x1C, 0x7C, 0xAD, - 0x08, 0x7C, 0x85, 0x57, 0xAD, 0x0A, 0x7C, 0x85, - 0x56, 0xC9, 0xD0, 0x90, 0x05, 0xA9, 0x02, 0x4C, - 0x82, 0x38, 0xA9, 0x01, 0x85, 0x54, 0xA9, 0x00, - 0x8D, 0x02, 0x44, 0x8D, 0x06, 0x44, 0x8D, 0x04, - 0x44, 0x4C, 0x92, 0x38, 0xAD, 0x00, 0x7C, 0xC5, - 0x5C, 0xF0, 0x1F, 0xC5, 0x5E, 0xF0, 0x09, 0x85, - 0x5E, 0xA9, 0x40, 0x85, 0x5D, 0x4C, 0xB8, 0x38, - 0xC6, 0x5D, 0x10, 0x0E, 0xA6, 0x58, 0x9D, 0x00, - 0x17, 0xE8, 0xE4, 0x59, 0xF0, 0x04, 0x86, 0x58, - 0x85, 0x5C, 0x20, 0x23, 0x3A, 0xA5, 0x07, 0xF0, - 0x0F, 0xA5, 0x0A, 0x85, 0x0B, 0xA5, 0x08, 0x09, - 0x10, 0x8D, 0x06, 0x44, 0x64, 0x02, 0x64, 0x07, - 0xA5, 0x00, 0xE5, 0x01, 0xC9, 0xC8, 0xA5, 0x09, - 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, - 0x44, 0xA5, 0x06, 0xF0, 0x08, 0xA5, 0x03, 0x85, - 0x04, 0x64, 0x02, 0x64, 0x06, 0x20, 0x23, 0x3A, - 0xA5, 0x13, 0xF0, 0x0F, 0xA5, 0x16, 0x85, 0x17, - 0xA5, 0x14, 0x09, 0x10, 0x8D, 0x06, 0x4C, 0x64, - 0x0E, 0x64, 0x13, 0xA5, 0x0C, 0xE5, 0x0D, 0xC9, - 0xC8, 0xA5, 0x15, 0x29, 0xF3, 0xB0, 0x02, 0x09, - 0x08, 0x8D, 0x04, 0x4C, 0xA5, 0x12, 0xF0, 0x08, - 0xA5, 0x0F, 0x85, 0x10, 0x64, 0x0E, 0x64, 0x12, - 0x20, 0x23, 0x3A, 0xA5, 0x1F, 0xF0, 0x0F, 0xA5, - 0x22, 0x85, 0x23, 0xA5, 0x20, 0x09, 0x10, 0x8D, - 0x06, 0x54, 0x64, 0x1A, 0x64, 0x1F, 0xA5, 0x18, - 0xE5, 0x19, 0xC9, 0xC8, 0xA5, 0x21, 0x29, 0xF3, - 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, 0x54, 0xA5, - 0x1E, 0xF0, 0x08, 0xA5, 0x1B, 0x85, 0x1C, 0x64, - 0x1A, 0x64, 0x1E, 0x20, 0x23, 0x3A, 0xA5, 0x2B, - 0xF0, 0x0F, 0xA5, 0x2E, 0x85, 0x2F, 0xA5, 0x2C, - 0x09, 0x10, 0x8D, 0x06, 0x5C, 0x64, 0x26, 0x64, - 0x2B, 0xA5, 0x24, 0xE5, 0x25, 0xC9, 0xC8, 0xA5, - 0x2D, 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, - 0x04, 0x5C, 0xA5, 0x2A, 0xF0, 0x08, 0xA5, 0x27, - 0x85, 0x28, 0x64, 0x26, 0x64, 0x2A, 0x20, 0x23, - 0x3A, 0xA5, 0x37, 0xF0, 0x0F, 0xA5, 0x3A, 0x85, - 0x3B, 0xA5, 0x38, 0x09, 0x10, 0x8D, 0x06, 0x64, - 0x64, 0x32, 0x64, 0x37, 0xA5, 0x30, 0xE5, 0x31, - 0xC9, 0xC8, 0xA5, 0x39, 0x29, 0xF3, 0xB0, 0x02, - 0x09, 0x08, 0x8D, 0x04, 0x64, 0xA5, 0x36, 0xF0, - 0x08, 0xA5, 0x33, 0x85, 0x34, 0x64, 0x32, 0x64, - 0x36, 0x20, 0x23, 0x3A, 0xA5, 0x43, 0xF0, 0x0F, - 0xA5, 0x46, 0x85, 0x47, 0xA5, 0x44, 0x09, 0x10, - 0x8D, 0x06, 0x6C, 0x64, 0x3E, 0x64, 0x43, 0xA5, - 0x3C, 0xE5, 0x3D, 0xC9, 0xC8, 0xA5, 0x45, 0x29, - 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, 0x6C, - 0xA5, 0x42, 0xF0, 0x08, 0xA5, 0x3F, 0x85, 0x40, - 0x64, 0x3E, 0x64, 0x42, 0x20, 0x23, 0x3A, 0xA5, - 0x4F, 0xF0, 0x0F, 0xA5, 0x52, 0x85, 0x53, 0xA5, - 0x50, 0x09, 0x10, 0x8D, 0x06, 0x74, 0x64, 0x4A, - 0x64, 0x4F, 0xA5, 0x48, 0xE5, 0x49, 0xC9, 0xC8, - 0xA5, 0x51, 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, - 0x8D, 0x04, 0x74, 0xA5, 0x4E, 0xF0, 0x08, 0xA5, - 0x4B, 0x85, 0x4C, 0x64, 0x4A, 0x64, 0x4E, 0x20, - 0x23, 0x3A, 0x4C, 0x92, 0x38, 0xAD, 0x02, 0x44, - 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, - 0xAD, 0x00, 0x44, 0xD0, 0x32, 0xA6, 0x00, 0xA9, - 0x01, 0x9D, 0x00, 0x10, 0xA9, 0x01, 0x9D, 0x00, - 0x09, 0xE8, 0xE4, 0x01, 0xF0, 0x02, 0x86, 0x00, - 0x4C, 0x65, 0x3A, 0xA6, 0x00, 0xAD, 0x00, 0x44, - 0x9D, 0x00, 0x09, 0x9E, 0x00, 0x10, 0xE8, 0xE4, - 0x01, 0xF0, 0x02, 0x86, 0x00, 0x29, 0x7F, 0xC9, - 0x13, 0xD0, 0x04, 0xA5, 0x0B, 0x85, 0x02, 0xAD, - 0x02, 0x44, 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x05, - 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x01, 0xD0, - 0x21, 0x8E, 0x00, 0x44, 0x64, 0x05, 0x4C, 0x98, - 0x3A, 0xA6, 0x04, 0xE4, 0x03, 0xF0, 0x13, 0xA5, - 0x02, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x01, - 0xD0, 0x08, 0xBD, 0x00, 0x02, 0x8D, 0x00, 0x44, - 0xE6, 0x04, 0xAD, 0x02, 0x4C, 0x89, 0x08, 0xF0, - 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, 0x4C, - 0xD0, 0x32, 0xA6, 0x0C, 0xA9, 0x01, 0x9D, 0x00, - 0x11, 0xA9, 0x01, 0x9D, 0x00, 0x0A, 0xE8, 0xE4, - 0x0D, 0xF0, 0x02, 0x86, 0x0C, 0x4C, 0xDA, 0x3A, - 0xA6, 0x0C, 0xAD, 0x00, 0x4C, 0x9D, 0x00, 0x0A, - 0x9E, 0x00, 0x11, 0xE8, 0xE4, 0x0D, 0xF0, 0x02, - 0x86, 0x0C, 0x29, 0x7F, 0xC9, 0x13, 0xD0, 0x04, - 0xA5, 0x17, 0x85, 0x0E, 0xAD, 0x02, 0x4C, 0x29, - 0x10, 0xF0, 0x2C, 0xA6, 0x11, 0xF0, 0x0F, 0xAD, - 0x02, 0x7C, 0x29, 0x02, 0xD0, 0x21, 0x8E, 0x00, - 0x4C, 0x64, 0x11, 0x4C, 0x0D, 0x3B, 0xA6, 0x10, - 0xE4, 0x0F, 0xF0, 0x13, 0xA5, 0x0E, 0xD0, 0x0F, - 0xAD, 0x02, 0x7C, 0x29, 0x02, 0xD0, 0x08, 0xBD, - 0x00, 0x03, 0x8D, 0x00, 0x4C, 0xE6, 0x10, 0xAD, - 0x02, 0x54, 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, - 0xF0, 0x1B, 0xAD, 0x00, 0x54, 0xD0, 0x32, 0xA6, - 0x18, 0xA9, 0x01, 0x9D, 0x00, 0x12, 0xA9, 0x01, - 0x9D, 0x00, 0x0B, 0xE8, 0xE4, 0x19, 0xF0, 0x02, - 0x86, 0x18, 0x4C, 0x4F, 0x3B, 0xA6, 0x18, 0xAD, - 0x00, 0x54, 0x9D, 0x00, 0x0B, 0x9E, 0x00, 0x12, - 0xE8, 0xE4, 0x19, 0xF0, 0x02, 0x86, 0x18, 0x29, - 0x7F, 0xC9, 0x13, 0xD0, 0x04, 0xA5, 0x23, 0x85, - 0x1A, 0xAD, 0x02, 0x54, 0x29, 0x10, 0xF0, 0x2C, - 0xA6, 0x1D, 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, - 0x04, 0xD0, 0x21, 0x8E, 0x00, 0x54, 0x64, 0x1D, - 0x4C, 0x82, 0x3B, 0xA6, 0x1C, 0xE4, 0x1B, 0xF0, - 0x13, 0xA5, 0x1A, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, - 0x29, 0x04, 0xD0, 0x08, 0xBD, 0x00, 0x04, 0x8D, - 0x00, 0x54, 0xE6, 0x1C, 0xAD, 0x02, 0x5C, 0x89, - 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, - 0x00, 0x5C, 0xD0, 0x32, 0xA6, 0x24, 0xA9, 0x01, - 0x9D, 0x00, 0x13, 0xA9, 0x01, 0x9D, 0x00, 0x0C, - 0xE8, 0xE4, 0x25, 0xF0, 0x02, 0x86, 0x24, 0x4C, - 0xC4, 0x3B, 0xA6, 0x24, 0xAD, 0x00, 0x5C, 0x9D, - 0x00, 0x0C, 0x9E, 0x00, 0x13, 0xE8, 0xE4, 0x25, - 0xF0, 0x02, 0x86, 0x24, 0x29, 0x7F, 0xC9, 0x13, - 0xD0, 0x04, 0xA5, 0x2F, 0x85, 0x26, 0xAD, 0x02, - 0x5C, 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x29, 0xF0, - 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x08, 0xD0, 0x21, - 0x8E, 0x00, 0x5C, 0x64, 0x29, 0x4C, 0xF7, 0x3B, - 0xA6, 0x28, 0xE4, 0x27, 0xF0, 0x13, 0xA5, 0x26, - 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x08, 0xD0, - 0x08, 0xBD, 0x00, 0x05, 0x8D, 0x00, 0x5C, 0xE6, - 0x28, 0xAD, 0x02, 0x64, 0x89, 0x08, 0xF0, 0x3B, - 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, 0x64, 0xD0, - 0x32, 0xA6, 0x30, 0xA9, 0x01, 0x9D, 0x00, 0x14, - 0xA9, 0x01, 0x9D, 0x00, 0x0D, 0xE8, 0xE4, 0x31, - 0xF0, 0x02, 0x86, 0x30, 0x4C, 0x39, 0x3C, 0xA6, - 0x30, 0xAD, 0x00, 0x64, 0x9D, 0x00, 0x0D, 0x9E, - 0x00, 0x14, 0xE8, 0xE4, 0x31, 0xF0, 0x02, 0x86, - 0x30, 0x29, 0x7F, 0xC9, 0x13, 0xD0, 0x04, 0xA5, - 0x3B, 0x85, 0x32, 0xAD, 0x02, 0x64, 0x29, 0x10, - 0xF0, 0x2C, 0xA6, 0x35, 0xF0, 0x0F, 0xAD, 0x02, - 0x7C, 0x29, 0x10, 0xD0, 0x21, 0x8E, 0x00, 0x64, - 0x64, 0x35, 0x4C, 0x6C, 0x3C, 0xA6, 0x34, 0xE4, - 0x33, 0xF0, 0x13, 0xA5, 0x32, 0xD0, 0x0F, 0xAD, - 0x02, 0x7C, 0x29, 0x10, 0xD0, 0x08, 0xBD, 0x00, - 0x06, 0x8D, 0x00, 0x64, 0xE6, 0x34, 0xAD, 0x02, - 0x6C, 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, - 0x1B, 0xAD, 0x00, 0x6C, 0xD0, 0x32, 0xA6, 0x3C, - 0xA9, 0x01, 0x9D, 0x00, 0x15, 0xA9, 0x01, 0x9D, - 0x00, 0x0E, 0xE8, 0xE4, 0x3D, 0xF0, 0x02, 0x86, - 0x3C, 0x4C, 0xAE, 0x3C, 0xA6, 0x3C, 0xAD, 0x00, - 0x6C, 0x9D, 0x00, 0x0E, 0x9E, 0x00, 0x15, 0xE8, - 0xE4, 0x3D, 0xF0, 0x02, 0x86, 0x3C, 0x29, 0x7F, - 0xC9, 0x13, 0xD0, 0x04, 0xA5, 0x47, 0x85, 0x3E, - 0xAD, 0x02, 0x6C, 0x29, 0x10, 0xF0, 0x2C, 0xA6, - 0x41, 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x20, - 0xD0, 0x21, 0x8E, 0x00, 0x6C, 0x64, 0x41, 0x4C, - 0xE1, 0x3C, 0xA6, 0x40, 0xE4, 0x3F, 0xF0, 0x13, - 0xA5, 0x3E, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, - 0x20, 0xD0, 0x08, 0xBD, 0x00, 0x07, 0x8D, 0x00, - 0x6C, 0xE6, 0x40, 0xAD, 0x02, 0x74, 0x89, 0x08, - 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, - 0x74, 0xD0, 0x32, 0xA6, 0x48, 0xA9, 0x01, 0x9D, - 0x00, 0x16, 0xA9, 0x01, 0x9D, 0x00, 0x0F, 0xE8, - 0xE4, 0x49, 0xF0, 0x02, 0x86, 0x48, 0x4C, 0x23, - 0x3D, 0xA6, 0x48, 0xAD, 0x00, 0x74, 0x9D, 0x00, - 0x0F, 0x9E, 0x00, 0x16, 0xE8, 0xE4, 0x49, 0xF0, - 0x02, 0x86, 0x48, 0x29, 0x7F, 0xC9, 0x13, 0xD0, - 0x04, 0xA5, 0x53, 0x85, 0x4A, 0xAD, 0x02, 0x74, - 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x4D, 0xF0, 0x0F, - 0xAD, 0x02, 0x7C, 0x29, 0x40, 0xD0, 0x21, 0x8E, - 0x00, 0x74, 0x64, 0x4D, 0x4C, 0x56, 0x3D, 0xA6, - 0x4C, 0xE4, 0x4B, 0xF0, 0x13, 0xA5, 0x4A, 0xD0, - 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x40, 0xD0, 0x08, - 0xBD, 0x00, 0x08, 0x8D, 0x00, 0x74, 0xE6, 0x4C, - 0x60, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xD0, 0xD0, 0x00, 0x38, - 0xCE, 0xC0, -}; diff --git a/drivers/char/sx.c b/drivers/char/sx.c deleted file mode 100644 index 1291462..0000000 --- a/drivers/char/sx.c +++ /dev/null @@ -1,2894 +0,0 @@ -/* sx.c -- driver for the Specialix SX series cards. - * - * This driver will also support the older SI, and XIO cards. - * - * - * (C) 1998 - 2004 R.E.Wolff@BitWizard.nl - * - * Simon Allen (simonallen@cix.compulink.co.uk) wrote a previous - * version of this driver. Some fragments may have been copied. (none - * yet :-) - * - * Specialix pays for the development and support of this driver. - * Please DO contact support@specialix.co.uk if you require - * support. But please read the documentation (sx.txt) first. - * - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - * Revision history: - * Revision 1.33 2000/03/09 10:00:00 pvdl,wolff - * - Fixed module and port counting - * - Fixed signal handling - * - Fixed an Ooops - * - * Revision 1.32 2000/03/07 09:00:00 wolff,pvdl - * - Fixed some sx_dprintk typos - * - added detection for an invalid board/module configuration - * - * Revision 1.31 2000/03/06 12:00:00 wolff,pvdl - * - Added support for EISA - * - * Revision 1.30 2000/01/21 17:43:06 wolff - * - Added support for SX+ - * - * Revision 1.26 1999/08/05 15:22:14 wolff - * - Port to 2.3.x - * - Reformatted to Linus' liking. - * - * Revision 1.25 1999/07/30 14:24:08 wolff - * Had accidentally left "gs_debug" set to "-1" instead of "off" (=0). - * - * Revision 1.24 1999/07/28 09:41:52 wolff - * - I noticed the remark about use-count straying in sx.txt. I checked - * sx_open, and found a few places where that could happen. I hope it's - * fixed now. - * - * Revision 1.23 1999/07/28 08:56:06 wolff - * - Fixed crash when sx_firmware run twice. - * - Added sx_slowpoll as a module parameter (I guess nobody really wanted - * to change it from the default... ) - * - Fixed a stupid editing problem I introduced in 1.22. - * - Fixed dropping characters on a termios change. - * - * Revision 1.22 1999/07/26 21:01:43 wolff - * Russell Brown noticed that I had overlooked 4 out of six modem control - * signals in sx_getsignals. Ooops. - * - * Revision 1.21 1999/07/23 09:11:33 wolff - * I forgot to free dynamically allocated memory when the driver is unloaded. - * - * Revision 1.20 1999/07/20 06:25:26 wolff - * The "closing wait" wasn't honoured. Thanks to James Griffiths for - * reporting this. - * - * Revision 1.19 1999/07/11 08:59:59 wolff - * Fixed an oops in close, when an open was pending. Changed the memtest - * a bit. Should also test the board in word-mode, however my card fails the - * memtest then. I still have to figure out what is wrong... - * - * Revision 1.18 1999/06/10 09:38:42 wolff - * Changed the format of the firmware revision from %04x to %x.%02x . - * - * Revision 1.17 1999/06/04 09:44:35 wolff - * fixed problem: reference to pci stuff when config_pci was off... - * Thanks to Jorge Novo for noticing this. - * - * Revision 1.16 1999/06/02 08:30:15 wolff - * added/removed the workaround for the DCD bug in the Firmware. - * A bit more debugging code to locate that... - * - * Revision 1.15 1999/06/01 11:35:30 wolff - * when DCD is left low (floating?), on TA's the firmware first tells us - * that DCD is high, but after a short while suddenly comes to the - * conclusion that it is low. All this would be fine, if it weren't that - * Unix requires us to send a "hangup" signal in that case. This usually - * all happens BEFORE the program has had a chance to ioctl the device - * into clocal mode.. - * - * Revision 1.14 1999/05/25 11:18:59 wolff - * Added PCI-fix. - * Added checks for return code of sx_sendcommand. - * Don't issue "reconfig" if port isn't open yet. (bit us on TA modules...) - * - * Revision 1.13 1999/04/29 15:18:01 wolff - * Fixed an "oops" that showed on SuSE 6.0 systems. - * Activate DTR again after stty 0. - * - * Revision 1.12 1999/04/29 07:49:52 wolff - * Improved "stty 0" handling a bit. (used to change baud to 9600 assuming - * the connection would be dropped anyway. That is not always the case, - * and confuses people). - * Told the card to always monitor the modem signals. - * Added support for dynamic gs_debug adjustments. - * Now tells the rest of the system the number of ports. - * - * Revision 1.11 1999/04/24 11:11:30 wolff - * Fixed two stupid typos in the memory test. - * - * Revision 1.10 1999/04/24 10:53:39 wolff - * Added some of Christian's suggestions. - * Fixed an HW_COOK_IN bug (ISIG was not in I_OTHER. We used to trust the - * card to send the signal to the process.....) - * - * Revision 1.9 1999/04/23 07:26:38 wolff - * Included Christian Lademann's 2.0 compile-warning fixes and interrupt - * assignment redesign. - * Cleanup of some other stuff. - * - * Revision 1.8 1999/04/16 13:05:30 wolff - * fixed a DCD change unnoticed bug. - * - * Revision 1.7 1999/04/14 22:19:51 wolff - * Fixed typo that showed up in 2.0.x builds (get_user instead of Get_user!) - * - * Revision 1.6 1999/04/13 18:40:20 wolff - * changed misc-minor to 161, as assigned by HPA. - * - * Revision 1.5 1999/04/13 15:12:25 wolff - * Fixed use-count leak when "hangup" occurred. - * Added workaround for a stupid-PCIBIOS bug. - * - * - * Revision 1.4 1999/04/01 22:47:40 wolff - * Fixed < 1M linux-2.0 problem. - * (vremap isn't compatible with ioremap in that case) - * - * Revision 1.3 1999/03/31 13:45:45 wolff - * Firmware loading is now done through a separate IOCTL. - * - * Revision 1.2 1999/03/28 12:22:29 wolff - * rcs cleanup - * - * Revision 1.1 1999/03/28 12:10:34 wolff - * Readying for release on 2.0.x (sorry David, 1.01 becomes 1.1 for RCS). - * - * Revision 0.12 1999/03/28 09:20:10 wolff - * Fixed problem in 0.11, continueing cleanup. - * - * Revision 0.11 1999/03/28 08:46:44 wolff - * cleanup. Not good. - * - * Revision 0.10 1999/03/28 08:09:43 wolff - * Fixed loosing characters on close. - * - * Revision 0.9 1999/03/21 22:52:01 wolff - * Ported back to 2.2.... (minor things) - * - * Revision 0.8 1999/03/21 22:40:33 wolff - * Port to 2.0 - * - * Revision 0.7 1999/03/21 19:06:34 wolff - * Fixed hangup processing. - * - * Revision 0.6 1999/02/05 08:45:14 wolff - * fixed real_raw problems. Inclusion into kernel imminent. - * - * Revision 0.5 1998/12/21 23:51:06 wolff - * Snatched a nasty bug: sx_transmit_chars was getting re-entered, and it - * shouldn't have. THATs why I want to have transmit interrupts even when - * the buffer is empty. - * - * Revision 0.4 1998/12/17 09:34:46 wolff - * PPP works. ioctl works. Basically works! - * - * Revision 0.3 1998/12/15 13:05:18 wolff - * It works! Wow! Gotta start implementing IOCTL and stuff.... - * - * Revision 0.2 1998/12/01 08:33:53 wolff - * moved over to 2.1.130 - * - * Revision 0.1 1998/11/03 21:23:51 wolff - * Initial revision. Detects SX card. - * - * */ - -#define SX_VERSION 1.33 - -#include <linux/module.h> -#include <linux/kdev_t.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/mm.h> -#include <linux/serial.h> -#include <linux/fcntl.h> -#include <linux/major.h> -#include <linux/delay.h> -#include <linux/eisa.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/miscdevice.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/uaccess.h> - -/* The 3.0.0 version of sxboards/sxwindow.h uses BYTE and WORD.... */ -#define BYTE u8 -#define WORD u16 - -/* .... but the 3.0.4 version uses _u8 and _u16. */ -#define _u8 u8 -#define _u16 u16 - -#include "sxboards.h" -#include "sxwindow.h" - -#include <linux/generic_serial.h> -#include "sx.h" - -/* I don't think that this driver can handle more than 256 ports on - one machine. You'll have to increase the number of boards in sx.h - if you want more than 4 boards. */ - -#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 -#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000 -#endif - -/* Configurable options: - (Don't be too sure that it'll work if you toggle them) */ - -/* Am I paranoid or not ? ;-) */ -#undef SX_PARANOIA_CHECK - -/* 20 -> 2000 per second. The card should rate-limit interrupts at 100 - Hz, but it is user configurable. I don't recommend going above 1000 - Hz. The interrupt ratelimit might trigger if the interrupt is - shared with a very active other device. */ -#define IRQ_RATE_LIMIT 20 - -/* Sharing interrupts is possible now. If the other device wants more - than 2000 interrupts per second, we'd gracefully decline further - interrupts. That's not what we want. On the other hand, if the - other device interrupts 2000 times a second, don't use the SX - interrupt. Use polling. */ -#undef IRQ_RATE_LIMIT - -#if 0 -/* Not implemented */ -/* - * The following defines are mostly for testing purposes. But if you need - * some nice reporting in your syslog, you can define them also. - */ -#define SX_REPORT_FIFO -#define SX_REPORT_OVERRUN -#endif - -/* Function prototypes */ -static void sx_disable_tx_interrupts(void *ptr); -static void sx_enable_tx_interrupts(void *ptr); -static void sx_disable_rx_interrupts(void *ptr); -static void sx_enable_rx_interrupts(void *ptr); -static int sx_carrier_raised(struct tty_port *port); -static void sx_shutdown_port(void *ptr); -static int sx_set_real_termios(void *ptr); -static void sx_close(void *ptr); -static int sx_chars_in_buffer(void *ptr); -static int sx_init_board(struct sx_board *board); -static int sx_init_portstructs(int nboards, int nports); -static long sx_fw_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg); -static int sx_init_drivers(void); - -static struct tty_driver *sx_driver; - -static DEFINE_MUTEX(sx_boards_lock); -static struct sx_board boards[SX_NBOARDS]; -static struct sx_port *sx_ports; -static int sx_initialized; -static int sx_nports; -static int sx_debug; - -/* You can have the driver poll your card. - - Set sx_poll to 1 to poll every timer tick (10ms on Intel). - This is used when the card cannot use an interrupt for some reason. - - - set sx_slowpoll to 100 to do an extra poll once a second (on Intel). If - the driver misses an interrupt (report this if it DOES happen to you!) - everything will continue to work.... - */ -static int sx_poll = 1; -static int sx_slowpoll; - -/* The card limits the number of interrupts per second. - At 115k2 "100" should be sufficient. - If you're using higher baudrates, you can increase this... - */ - -static int sx_maxints = 100; - -#ifdef CONFIG_ISA - -/* These are the only open spaces in my computer. Yours may have more - or less.... -- REW - duh: Card at 0xa0000 is possible on HP Netserver?? -- pvdl -*/ -static int sx_probe_addrs[] = { - 0xc0000, 0xd0000, 0xe0000, - 0xc8000, 0xd8000, 0xe8000 -}; -static int si_probe_addrs[] = { - 0xc0000, 0xd0000, 0xe0000, - 0xc8000, 0xd8000, 0xe8000, 0xa0000 -}; -static int si1_probe_addrs[] = { - 0xd0000 -}; - -#define NR_SX_ADDRS ARRAY_SIZE(sx_probe_addrs) -#define NR_SI_ADDRS ARRAY_SIZE(si_probe_addrs) -#define NR_SI1_ADDRS ARRAY_SIZE(si1_probe_addrs) - -module_param_array(sx_probe_addrs, int, NULL, 0); -module_param_array(si_probe_addrs, int, NULL, 0); -#endif - -/* Set the mask to all-ones. This alas, only supports 32 interrupts. - Some architectures may need more. */ -static int sx_irqmask = -1; - -module_param(sx_poll, int, 0); -module_param(sx_slowpoll, int, 0); -module_param(sx_maxints, int, 0); -module_param(sx_debug, int, 0); -module_param(sx_irqmask, int, 0); - -MODULE_LICENSE("GPL"); - -static struct real_driver sx_real_driver = { - sx_disable_tx_interrupts, - sx_enable_tx_interrupts, - sx_disable_rx_interrupts, - sx_enable_rx_interrupts, - sx_shutdown_port, - sx_set_real_termios, - sx_chars_in_buffer, - sx_close, -}; - -/* - This driver can spew a whole lot of debugging output at you. If you - need maximum performance, you should disable the DEBUG define. To - aid in debugging in the field, I'm leaving the compile-time debug - features enabled, and disable them "runtime". That allows me to - instruct people with problems to enable debugging without requiring - them to recompile... -*/ -#define DEBUG - -#ifdef DEBUG -#define sx_dprintk(f, str...) if (sx_debug & f) printk (str) -#else -#define sx_dprintk(f, str...) /* nothing */ -#endif - -#define func_enter() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s\n",__func__) -#define func_exit() sx_dprintk(SX_DEBUG_FLOW, "sx: exit %s\n",__func__) - -#define func_enter2() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \ - __func__, port->line) - -/* - * Firmware loader driver specific routines - * - */ - -static const struct file_operations sx_fw_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = sx_fw_ioctl, - .llseek = noop_llseek, -}; - -static struct miscdevice sx_fw_device = { - SXCTL_MISC_MINOR, "sxctl", &sx_fw_fops -}; - -#ifdef SX_PARANOIA_CHECK - -/* This doesn't work. Who's paranoid around here? Not me! */ - -static inline int sx_paranoia_check(struct sx_port const *port, - char *name, const char *routine) -{ - static const char *badmagic = KERN_ERR "sx: Warning: bad sx port magic " - "number for device %s in %s\n"; - static const char *badinfo = KERN_ERR "sx: Warning: null sx port for " - "device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != SX_MAGIC) { - printk(badmagic, name, routine); - return 1; - } - - return 0; -} -#else -#define sx_paranoia_check(a,b,c) 0 -#endif - -/* The timeouts. First try 30 times as fast as possible. Then give - the card some time to breathe between accesses. (Otherwise the - processor on the card might not be able to access its OWN bus... */ - -#define TIMEOUT_1 30 -#define TIMEOUT_2 1000000 - -#ifdef DEBUG -static void my_hd_io(void __iomem *p, int len) -{ - int i, j, ch; - unsigned char __iomem *addr = p; - - for (i = 0; i < len; i += 16) { - printk("%p ", addr + i); - for (j = 0; j < 16; j++) { - printk("%02x %s", readb(addr + j + i), - (j == 7) ? " " : ""); - } - for (j = 0; j < 16; j++) { - ch = readb(addr + j + i); - printk("%c", (ch < 0x20) ? '.' : - ((ch > 0x7f) ? '.' : ch)); - } - printk("\n"); - } -} -static void my_hd(void *p, int len) -{ - int i, j, ch; - unsigned char *addr = p; - - for (i = 0; i < len; i += 16) { - printk("%p ", addr + i); - for (j = 0; j < 16; j++) { - printk("%02x %s", addr[j + i], (j == 7) ? " " : ""); - } - for (j = 0; j < 16; j++) { - ch = addr[j + i]; - printk("%c", (ch < 0x20) ? '.' : - ((ch > 0x7f) ? '.' : ch)); - } - printk("\n"); - } -} -#endif - -/* This needs redoing for Alpha -- REW -- Done. */ - -static inline void write_sx_byte(struct sx_board *board, int offset, u8 byte) -{ - writeb(byte, board->base + offset); -} - -static inline u8 read_sx_byte(struct sx_board *board, int offset) -{ - return readb(board->base + offset); -} - -static inline void write_sx_word(struct sx_board *board, int offset, u16 word) -{ - writew(word, board->base + offset); -} - -static inline u16 read_sx_word(struct sx_board *board, int offset) -{ - return readw(board->base + offset); -} - -static int sx_busy_wait_eq(struct sx_board *board, - int offset, int mask, int correctval) -{ - int i; - - func_enter(); - - for (i = 0; i < TIMEOUT_1; i++) - if ((read_sx_byte(board, offset) & mask) == correctval) { - func_exit(); - return 1; - } - - for (i = 0; i < TIMEOUT_2; i++) { - if ((read_sx_byte(board, offset) & mask) == correctval) { - func_exit(); - return 1; - } - udelay(1); - } - - func_exit(); - return 0; -} - -static int sx_busy_wait_neq(struct sx_board *board, - int offset, int mask, int badval) -{ - int i; - - func_enter(); - - for (i = 0; i < TIMEOUT_1; i++) - if ((read_sx_byte(board, offset) & mask) != badval) { - func_exit(); - return 1; - } - - for (i = 0; i < TIMEOUT_2; i++) { - if ((read_sx_byte(board, offset) & mask) != badval) { - func_exit(); - return 1; - } - udelay(1); - } - - func_exit(); - return 0; -} - -/* 5.6.4 of 6210028 r2.3 */ -static int sx_reset(struct sx_board *board) -{ - func_enter(); - - if (IS_SX_BOARD(board)) { - - write_sx_byte(board, SX_CONFIG, 0); - write_sx_byte(board, SX_RESET, 1); /* Value doesn't matter */ - - if (!sx_busy_wait_eq(board, SX_RESET_STATUS, 1, 0)) { - printk(KERN_INFO "sx: Card doesn't respond to " - "reset...\n"); - return 0; - } - } else if (IS_EISA_BOARD(board)) { - outb(board->irq << 4, board->eisa_base + 0xc02); - } else if (IS_SI1_BOARD(board)) { - write_sx_byte(board, SI1_ISA_RESET, 0); /*value doesn't matter*/ - } else { - /* Gory details of the SI/ISA board */ - write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_SET); - write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_CLEAR); - write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_CLEAR); - write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_CLEAR); - write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR); - write_sx_byte(board, SI2_ISA_IRQSET, SI2_ISA_IRQSET_CLEAR); - } - - func_exit(); - return 1; -} - -/* This doesn't work on machines where "NULL" isn't 0 */ -/* If you have one of those, someone will need to write - the equivalent of this, which will amount to about 3 lines. I don't - want to complicate this right now. -- REW - (See, I do write comments every now and then :-) */ -#define OFFSETOF(strct, elem) ((long)&(((struct strct *)NULL)->elem)) - -#define CHAN_OFFSET(port,elem) (port->ch_base + OFFSETOF (_SXCHANNEL, elem)) -#define MODU_OFFSET(board,addr,elem) (addr + OFFSETOF (_SXMODULE, elem)) -#define BRD_OFFSET(board,elem) (OFFSETOF (_SXCARD, elem)) - -#define sx_write_channel_byte(port, elem, val) \ - write_sx_byte (port->board, CHAN_OFFSET (port, elem), val) - -#define sx_read_channel_byte(port, elem) \ - read_sx_byte (port->board, CHAN_OFFSET (port, elem)) - -#define sx_write_channel_word(port, elem, val) \ - write_sx_word (port->board, CHAN_OFFSET (port, elem), val) - -#define sx_read_channel_word(port, elem) \ - read_sx_word (port->board, CHAN_OFFSET (port, elem)) - -#define sx_write_module_byte(board, addr, elem, val) \ - write_sx_byte (board, MODU_OFFSET (board, addr, elem), val) - -#define sx_read_module_byte(board, addr, elem) \ - read_sx_byte (board, MODU_OFFSET (board, addr, elem)) - -#define sx_write_module_word(board, addr, elem, val) \ - write_sx_word (board, MODU_OFFSET (board, addr, elem), val) - -#define sx_read_module_word(board, addr, elem) \ - read_sx_word (board, MODU_OFFSET (board, addr, elem)) - -#define sx_write_board_byte(board, elem, val) \ - write_sx_byte (board, BRD_OFFSET (board, elem), val) - -#define sx_read_board_byte(board, elem) \ - read_sx_byte (board, BRD_OFFSET (board, elem)) - -#define sx_write_board_word(board, elem, val) \ - write_sx_word (board, BRD_OFFSET (board, elem), val) - -#define sx_read_board_word(board, elem) \ - read_sx_word (board, BRD_OFFSET (board, elem)) - -static int sx_start_board(struct sx_board *board) -{ - if (IS_SX_BOARD(board)) { - write_sx_byte(board, SX_CONFIG, SX_CONF_BUSEN); - } else if (IS_EISA_BOARD(board)) { - write_sx_byte(board, SI2_EISA_OFF, SI2_EISA_VAL); - outb((board->irq << 4) | 4, board->eisa_base + 0xc02); - } else if (IS_SI1_BOARD(board)) { - write_sx_byte(board, SI1_ISA_RESET_CLEAR, 0); - write_sx_byte(board, SI1_ISA_INTCL, 0); - } else { - /* Don't bug me about the clear_set. - I haven't the foggiest idea what it's about -- REW */ - write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_CLEAR); - write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET); - } - return 1; -} - -#define SX_IRQ_REG_VAL(board) \ - ((board->flags & SX_ISA_BOARD) ? (board->irq << 4) : 0) - -/* Note. The SX register is write-only. Therefore, we have to enable the - bus too. This is a no-op, if you don't mess with this driver... */ -static int sx_start_interrupts(struct sx_board *board) -{ - - /* Don't call this with board->irq == 0 */ - - if (IS_SX_BOARD(board)) { - write_sx_byte(board, SX_CONFIG, SX_IRQ_REG_VAL(board) | - SX_CONF_BUSEN | SX_CONF_HOSTIRQ); - } else if (IS_EISA_BOARD(board)) { - inb(board->eisa_base + 0xc03); - } else if (IS_SI1_BOARD(board)) { - write_sx_byte(board, SI1_ISA_INTCL, 0); - write_sx_byte(board, SI1_ISA_INTCL_CLEAR, 0); - } else { - switch (board->irq) { - case 11: - write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_SET); - break; - case 12: - write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_SET); - break; - case 15: - write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_SET); - break; - default: - printk(KERN_INFO "sx: SI/XIO card doesn't support " - "interrupt %d.\n", board->irq); - return 0; - } - write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET); - } - - return 1; -} - -static int sx_send_command(struct sx_port *port, - int command, int mask, int newstat) -{ - func_enter2(); - write_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat), command); - func_exit(); - return sx_busy_wait_eq(port->board, CHAN_OFFSET(port, hi_hstat), mask, - newstat); -} - -static char *mod_type_s(int module_type) -{ - switch (module_type) { - case TA4: - return "TA4"; - case TA8: - return "TA8"; - case TA4_ASIC: - return "TA4_ASIC"; - case TA8_ASIC: - return "TA8_ASIC"; - case MTA_CD1400: - return "MTA_CD1400"; - case SXDC: - return "SXDC"; - default: - return "Unknown/invalid"; - } -} - -static char *pan_type_s(int pan_type) -{ - switch (pan_type) { - case MOD_RS232DB25: - return "MOD_RS232DB25"; - case MOD_RS232RJ45: - return "MOD_RS232RJ45"; - case MOD_RS422DB25: - return "MOD_RS422DB25"; - case MOD_PARALLEL: - return "MOD_PARALLEL"; - case MOD_2_RS232DB25: - return "MOD_2_RS232DB25"; - case MOD_2_RS232RJ45: - return "MOD_2_RS232RJ45"; - case MOD_2_RS422DB25: - return "MOD_2_RS422DB25"; - case MOD_RS232DB25MALE: - return "MOD_RS232DB25MALE"; - case MOD_2_PARALLEL: - return "MOD_2_PARALLEL"; - case MOD_BLANK: - return "empty"; - default: - return "invalid"; - } -} - -static int mod_compat_type(int module_type) -{ - return module_type >> 4; -} - -static void sx_reconfigure_port(struct sx_port *port) -{ - if (sx_read_channel_byte(port, hi_hstat) == HS_IDLE_OPEN) { - if (sx_send_command(port, HS_CONFIG, -1, HS_IDLE_OPEN) != 1) { - printk(KERN_WARNING "sx: Sent reconfigure command, but " - "card didn't react.\n"); - } - } else { - sx_dprintk(SX_DEBUG_TERMIOS, "sx: Not sending reconfigure: " - "port isn't open (%02x).\n", - sx_read_channel_byte(port, hi_hstat)); - } -} - -static void sx_setsignals(struct sx_port *port, int dtr, int rts) -{ - int t; - func_enter2(); - - t = sx_read_channel_byte(port, hi_op); - if (dtr >= 0) - t = dtr ? (t | OP_DTR) : (t & ~OP_DTR); - if (rts >= 0) - t = rts ? (t | OP_RTS) : (t & ~OP_RTS); - sx_write_channel_byte(port, hi_op, t); - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "setsignals: %d/%d\n", dtr, rts); - - func_exit(); -} - -static int sx_getsignals(struct sx_port *port) -{ - int i_stat, o_stat; - - o_stat = sx_read_channel_byte(port, hi_op); - i_stat = sx_read_channel_byte(port, hi_ip); - - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) " - "%02x/%02x\n", - (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0, - port->c_dcd, tty_port_carrier_raised(&port->gs.port), - sx_read_channel_byte(port, hi_ip), - sx_read_channel_byte(port, hi_state)); - - return (((o_stat & OP_DTR) ? TIOCM_DTR : 0) | - ((o_stat & OP_RTS) ? TIOCM_RTS : 0) | - ((i_stat & IP_CTS) ? TIOCM_CTS : 0) | - ((i_stat & IP_DCD) ? TIOCM_CAR : 0) | - ((i_stat & IP_DSR) ? TIOCM_DSR : 0) | - ((i_stat & IP_RI) ? TIOCM_RNG : 0)); -} - -static void sx_set_baud(struct sx_port *port) -{ - int t; - - if (port->board->ta_type == MOD_SXDC) { - switch (port->gs.baud) { - /* Save some typing work... */ -#define e(x) case x: t = BAUD_ ## x; break - e(50); - e(75); - e(110); - e(150); - e(200); - e(300); - e(600); - e(1200); - e(1800); - e(2000); - e(2400); - e(4800); - e(7200); - e(9600); - e(14400); - e(19200); - e(28800); - e(38400); - e(56000); - e(57600); - e(64000); - e(76800); - e(115200); - e(128000); - e(150000); - e(230400); - e(256000); - e(460800); - e(921600); - case 134: - t = BAUD_134_5; - break; - case 0: - t = -1; - break; - default: - /* Can I return "invalid"? */ - t = BAUD_9600; - printk(KERN_INFO "sx: unsupported baud rate: %d.\n", - port->gs.baud); - break; - } -#undef e - if (t > 0) { -/* The baud rate is not set to 0, so we're enabeling DTR... -- REW */ - sx_setsignals(port, 1, -1); - /* XXX This is not TA & MTA compatible */ - sx_write_channel_byte(port, hi_csr, 0xff); - - sx_write_channel_byte(port, hi_txbaud, t); - sx_write_channel_byte(port, hi_rxbaud, t); - } else { - sx_setsignals(port, 0, -1); - } - } else { - switch (port->gs.baud) { -#define e(x) case x: t = CSR_ ## x; break - e(75); - e(150); - e(300); - e(600); - e(1200); - e(2400); - e(4800); - e(1800); - e(9600); - e(19200); - e(57600); - e(38400); -/* TA supports 110, but not 115200, MTA supports 115200, but not 110 */ - case 110: - if (port->board->ta_type == MOD_TA) { - t = CSR_110; - break; - } else { - t = CSR_9600; - printk(KERN_INFO "sx: Unsupported baud rate: " - "%d.\n", port->gs.baud); - break; - } - case 115200: - if (port->board->ta_type == MOD_TA) { - t = CSR_9600; - printk(KERN_INFO "sx: Unsupported baud rate: " - "%d.\n", port->gs.baud); - break; - } else { - t = CSR_110; - break; - } - case 0: - t = -1; - break; - default: - t = CSR_9600; - printk(KERN_INFO "sx: Unsupported baud rate: %d.\n", - port->gs.baud); - break; - } -#undef e - if (t >= 0) { - sx_setsignals(port, 1, -1); - sx_write_channel_byte(port, hi_csr, t * 0x11); - } else { - sx_setsignals(port, 0, -1); - } - } -} - -/* Simon Allen's version of this routine was 225 lines long. 85 is a lot - better. -- REW */ - -static int sx_set_real_termios(void *ptr) -{ - struct sx_port *port = ptr; - - func_enter2(); - - if (!port->gs.port.tty) - return 0; - - /* What is this doing here? -- REW - Ha! figured it out. It is to allow you to get DTR active again - if you've dropped it with stty 0. Moved to set_baud, where it - belongs (next to the drop dtr if baud == 0) -- REW */ - /* sx_setsignals (port, 1, -1); */ - - sx_set_baud(port); - -#define CFLAG port->gs.port.tty->termios->c_cflag - sx_write_channel_byte(port, hi_mr1, - (C_PARENB(port->gs.port.tty) ? MR1_WITH : MR1_NONE) | - (C_PARODD(port->gs.port.tty) ? MR1_ODD : MR1_EVEN) | - (C_CRTSCTS(port->gs.port.tty) ? MR1_RTS_RXFLOW : 0) | - (((CFLAG & CSIZE) == CS8) ? MR1_8_BITS : 0) | - (((CFLAG & CSIZE) == CS7) ? MR1_7_BITS : 0) | - (((CFLAG & CSIZE) == CS6) ? MR1_6_BITS : 0) | - (((CFLAG & CSIZE) == CS5) ? MR1_5_BITS : 0)); - - sx_write_channel_byte(port, hi_mr2, - (C_CRTSCTS(port->gs.port.tty) ? MR2_CTS_TXFLOW : 0) | - (C_CSTOPB(port->gs.port.tty) ? MR2_2_STOP : - MR2_1_STOP)); - - switch (CFLAG & CSIZE) { - case CS8: - sx_write_channel_byte(port, hi_mask, 0xff); - break; - case CS7: - sx_write_channel_byte(port, hi_mask, 0x7f); - break; - case CS6: - sx_write_channel_byte(port, hi_mask, 0x3f); - break; - case CS5: - sx_write_channel_byte(port, hi_mask, 0x1f); - break; - default: - printk(KERN_INFO "sx: Invalid wordsize: %u\n", - (unsigned int)CFLAG & CSIZE); - break; - } - - sx_write_channel_byte(port, hi_prtcl, - (I_IXON(port->gs.port.tty) ? SP_TXEN : 0) | - (I_IXOFF(port->gs.port.tty) ? SP_RXEN : 0) | - (I_IXANY(port->gs.port.tty) ? SP_TANY : 0) | SP_DCEN); - - sx_write_channel_byte(port, hi_break, - (I_IGNBRK(port->gs.port.tty) ? BR_IGN : 0 | - I_BRKINT(port->gs.port.tty) ? BR_INT : 0)); - - sx_write_channel_byte(port, hi_txon, START_CHAR(port->gs.port.tty)); - sx_write_channel_byte(port, hi_rxon, START_CHAR(port->gs.port.tty)); - sx_write_channel_byte(port, hi_txoff, STOP_CHAR(port->gs.port.tty)); - sx_write_channel_byte(port, hi_rxoff, STOP_CHAR(port->gs.port.tty)); - - sx_reconfigure_port(port); - - /* Tell line discipline whether we will do input cooking */ - if (I_OTHER(port->gs.port.tty)) { - clear_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags); - } else { - set_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags); - } - sx_dprintk(SX_DEBUG_TERMIOS, "iflags: %x(%d) ", - (unsigned int)port->gs.port.tty->termios->c_iflag, - I_OTHER(port->gs.port.tty)); - -/* Tell line discipline whether we will do output cooking. - * If OPOST is set and no other output flags are set then we can do output - * processing. Even if only *one* other flag in the O_OTHER group is set - * we do cooking in software. - */ - if (O_OPOST(port->gs.port.tty) && !O_OTHER(port->gs.port.tty)) { - set_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags); - } else { - clear_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags); - } - sx_dprintk(SX_DEBUG_TERMIOS, "oflags: %x(%d)\n", - (unsigned int)port->gs.port.tty->termios->c_oflag, - O_OTHER(port->gs.port.tty)); - /* port->c_dcd = sx_get_CD (port); */ - func_exit(); - return 0; -} - -/* ********************************************************************** * - * the interrupt related routines * - * ********************************************************************** */ - -/* Note: - Other drivers use the macro "MIN" to calculate how much to copy. - This has the disadvantage that it will evaluate parts twice. That's - expensive when it's IO (and the compiler cannot optimize those away!). - Moreover, I'm not sure that you're race-free. - - I assign a value, and then only allow the value to decrease. This - is always safe. This makes the code a few lines longer, and you - know I'm dead against that, but I think it is required in this - case. */ - -static void sx_transmit_chars(struct sx_port *port) -{ - int c; - int tx_ip; - int txroom; - - func_enter2(); - sx_dprintk(SX_DEBUG_TRANSMIT, "Port %p: transmit %d chars\n", - port, port->gs.xmit_cnt); - - if (test_and_set_bit(SX_PORT_TRANSMIT_LOCK, &port->locks)) { - return; - } - - while (1) { - c = port->gs.xmit_cnt; - - sx_dprintk(SX_DEBUG_TRANSMIT, "Copying %d ", c); - tx_ip = sx_read_channel_byte(port, hi_txipos); - - /* Took me 5 minutes to deduce this formula. - Luckily it is literally in the manual in section 6.5.4.3.5 */ - txroom = (sx_read_channel_byte(port, hi_txopos) - tx_ip - 1) & - 0xff; - - /* Don't copy more bytes than there is room for in the buffer */ - if (c > txroom) - c = txroom; - sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, txroom); - - /* Don't copy past the end of the hardware transmit buffer */ - if (c > 0x100 - tx_ip) - c = 0x100 - tx_ip; - - sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, 0x100 - tx_ip); - - /* Don't copy pas the end of the source buffer */ - if (c > SERIAL_XMIT_SIZE - port->gs.xmit_tail) - c = SERIAL_XMIT_SIZE - port->gs.xmit_tail; - - sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%ld) \n", - c, SERIAL_XMIT_SIZE - port->gs.xmit_tail); - - /* If for one reason or another, we can't copy more data, we're - done! */ - if (c == 0) - break; - - memcpy_toio(port->board->base + CHAN_OFFSET(port, hi_txbuf) + - tx_ip, port->gs.xmit_buf + port->gs.xmit_tail, c); - - /* Update the pointer in the card */ - sx_write_channel_byte(port, hi_txipos, (tx_ip + c) & 0xff); - - /* Update the kernel buffer end */ - port->gs.xmit_tail = (port->gs.xmit_tail + c) & - (SERIAL_XMIT_SIZE - 1); - - /* This one last. (this is essential) - It would allow others to start putting more data into the - buffer! */ - port->gs.xmit_cnt -= c; - } - - if (port->gs.xmit_cnt == 0) { - sx_disable_tx_interrupts(port); - } - - if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { - tty_wakeup(port->gs.port.tty); - sx_dprintk(SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n", - port->gs.wakeup_chars); - } - - clear_bit(SX_PORT_TRANSMIT_LOCK, &port->locks); - func_exit(); -} - -/* Note the symmetry between receiving chars and transmitting them! - Note: The kernel should have implemented both a receive buffer and - a transmit buffer. */ - -/* Inlined: Called only once. Remove the inline when you add another call */ -static inline void sx_receive_chars(struct sx_port *port) -{ - int c; - int rx_op; - struct tty_struct *tty; - int copied = 0; - unsigned char *rp; - - func_enter2(); - tty = port->gs.port.tty; - while (1) { - rx_op = sx_read_channel_byte(port, hi_rxopos); - c = (sx_read_channel_byte(port, hi_rxipos) - rx_op) & 0xff; - - sx_dprintk(SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c); - - /* Don't copy past the end of the hardware receive buffer */ - if (rx_op + c > 0x100) - c = 0x100 - rx_op; - - sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c); - - /* Don't copy more bytes than there is room for in the buffer */ - - c = tty_prepare_flip_string(tty, &rp, c); - - sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c); - - /* If for one reason or another, we can't copy more data, we're done! */ - if (c == 0) - break; - - sx_dprintk(SX_DEBUG_RECEIVE, "Copying over %d chars. First is " - "%d at %lx\n", c, read_sx_byte(port->board, - CHAN_OFFSET(port, hi_rxbuf) + rx_op), - CHAN_OFFSET(port, hi_rxbuf)); - memcpy_fromio(rp, port->board->base + - CHAN_OFFSET(port, hi_rxbuf) + rx_op, c); - - /* This one last. ( Not essential.) - It allows the card to start putting more data into the - buffer! - Update the pointer in the card */ - sx_write_channel_byte(port, hi_rxopos, (rx_op + c) & 0xff); - - copied += c; - } - if (copied) { - struct timeval tv; - - do_gettimeofday(&tv); - sx_dprintk(SX_DEBUG_RECEIVE, "pushing flipq port %d (%3d " - "chars): %d.%06d (%d/%d)\n", port->line, - copied, (int)(tv.tv_sec % 60), (int)tv.tv_usec, - tty->raw, tty->real_raw); - - /* Tell the rest of the system the news. Great news. New - characters! */ - tty_flip_buffer_push(tty); - /* tty_schedule_flip (tty); */ - } - - func_exit(); -} - -/* Inlined: it is called only once. Remove the inline if you add another - call */ -static inline void sx_check_modem_signals(struct sx_port *port) -{ - int hi_state; - int c_dcd; - - hi_state = sx_read_channel_byte(port, hi_state); - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n", - port->c_dcd, tty_port_carrier_raised(&port->gs.port)); - - if (hi_state & ST_BREAK) { - hi_state &= ~ST_BREAK; - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a break.\n"); - sx_write_channel_byte(port, hi_state, hi_state); - gs_got_break(&port->gs); - } - if (hi_state & ST_DCD) { - hi_state &= ~ST_DCD; - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n"); - sx_write_channel_byte(port, hi_state, hi_state); - c_dcd = tty_port_carrier_raised(&port->gs.port); - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd); - if (c_dcd != port->c_dcd) { - port->c_dcd = c_dcd; - if (tty_port_carrier_raised(&port->gs.port)) { - /* DCD went UP */ - if ((sx_read_channel_byte(port, hi_hstat) != - HS_IDLE_CLOSED) && - !(port->gs.port.tty->termios-> - c_cflag & CLOCAL)) { - /* Are we blocking in open? */ - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " - "active, unblocking open\n"); - wake_up_interruptible(&port->gs.port. - open_wait); - } else { - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " - "raised. Ignoring.\n"); - } - } else { - /* DCD went down! */ - if (!(port->gs.port.tty->termios->c_cflag & CLOCAL)){ - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " - "dropped. hanging up....\n"); - tty_hangup(port->gs.port.tty); - } else { - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD " - "dropped. ignoring.\n"); - } - } - } else { - sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Hmmm. card told us " - "DCD changed, but it didn't.\n"); - } - } -} - -/* This is what an interrupt routine should look like. - * Small, elegant, clear. - */ - -static irqreturn_t sx_interrupt(int irq, void *ptr) -{ - struct sx_board *board = ptr; - struct sx_port *port; - int i; - - func_enter(); - sx_dprintk(SX_DEBUG_FLOW, "sx: enter sx_interrupt (%d/%d)\n", irq, - board->irq); - - /* AAargh! The order in which to do these things is essential and - not trivial. - - - Rate limit goes before "recursive". Otherwise a series of - recursive calls will hang the machine in the interrupt routine. - - - hardware twiddling goes before "recursive". Otherwise when we - poll the card, and a recursive interrupt happens, we won't - ack the card, so it might keep on interrupting us. (especially - level sensitive interrupt systems like PCI). - - - Rate limit goes before hardware twiddling. Otherwise we won't - catch a card that has gone bonkers. - - - The "initialized" test goes after the hardware twiddling. Otherwise - the card will stick us in the interrupt routine again. - - - The initialized test goes before recursive. - */ - -#ifdef IRQ_RATE_LIMIT - /* Aaargh! I'm ashamed. This costs more lines-of-code than the - actual interrupt routine!. (Well, used to when I wrote that - comment) */ - { - static int lastjif; - static int nintr = 0; - - if (lastjif == jiffies) { - if (++nintr > IRQ_RATE_LIMIT) { - free_irq(board->irq, board); - printk(KERN_ERR "sx: Too many interrupts. " - "Turning off interrupt %d.\n", - board->irq); - } - } else { - lastjif = jiffies; - nintr = 0; - } - } -#endif - - if (board->irq == irq) { - /* Tell the card we've noticed the interrupt. */ - - sx_write_board_word(board, cc_int_pending, 0); - if (IS_SX_BOARD(board)) { - write_sx_byte(board, SX_RESET_IRQ, 1); - } else if (IS_EISA_BOARD(board)) { - inb(board->eisa_base + 0xc03); - write_sx_word(board, 8, 0); - } else { - write_sx_byte(board, SI2_ISA_INTCLEAR, - SI2_ISA_INTCLEAR_CLEAR); - write_sx_byte(board, SI2_ISA_INTCLEAR, - SI2_ISA_INTCLEAR_SET); - } - } - - if (!sx_initialized) - return IRQ_HANDLED; - if (!(board->flags & SX_BOARD_INITIALIZED)) - return IRQ_HANDLED; - - if (test_and_set_bit(SX_BOARD_INTR_LOCK, &board->locks)) { - printk(KERN_ERR "Recursive interrupt! (%d)\n", board->irq); - return IRQ_HANDLED; - } - - for (i = 0; i < board->nports; i++) { - port = &board->ports[i]; - if (port->gs.port.flags & GS_ACTIVE) { - if (sx_read_channel_byte(port, hi_state)) { - sx_dprintk(SX_DEBUG_INTERRUPTS, "Port %d: " - "modem signal change?... \n",i); - sx_check_modem_signals(port); - } - if (port->gs.xmit_cnt) { - sx_transmit_chars(port); - } - if (!(port->gs.port.flags & SX_RX_THROTTLE)) { - sx_receive_chars(port); - } - } - } - - clear_bit(SX_BOARD_INTR_LOCK, &board->locks); - - sx_dprintk(SX_DEBUG_FLOW, "sx: exit sx_interrupt (%d/%d)\n", irq, - board->irq); - func_exit(); - return IRQ_HANDLED; -} - -static void sx_pollfunc(unsigned long data) -{ - struct sx_board *board = (struct sx_board *)data; - - func_enter(); - - sx_interrupt(0, board); - - mod_timer(&board->timer, jiffies + sx_poll); - func_exit(); -} - -/* ********************************************************************** * - * Here are the routines that actually * - * interface with the generic_serial driver * - * ********************************************************************** */ - -/* Ehhm. I don't know how to fiddle with interrupts on the SX card. --REW */ -/* Hmm. Ok I figured it out. You don't. */ - -static void sx_disable_tx_interrupts(void *ptr) -{ - struct sx_port *port = ptr; - func_enter2(); - - port->gs.port.flags &= ~GS_TX_INTEN; - - func_exit(); -} - -static void sx_enable_tx_interrupts(void *ptr) -{ - struct sx_port *port = ptr; - int data_in_buffer; - func_enter2(); - - /* First transmit the characters that we're supposed to */ - sx_transmit_chars(port); - - /* The sx card will never interrupt us if we don't fill the buffer - past 25%. So we keep considering interrupts off if that's the case. */ - data_in_buffer = (sx_read_channel_byte(port, hi_txipos) - - sx_read_channel_byte(port, hi_txopos)) & 0xff; - - /* XXX Must be "HIGH_WATER" for SI card according to doc. */ - if (data_in_buffer < LOW_WATER) - port->gs.port.flags &= ~GS_TX_INTEN; - - func_exit(); -} - -static void sx_disable_rx_interrupts(void *ptr) -{ - /* struct sx_port *port = ptr; */ - func_enter(); - - func_exit(); -} - -static void sx_enable_rx_interrupts(void *ptr) -{ - /* struct sx_port *port = ptr; */ - func_enter(); - - func_exit(); -} - -/* Jeez. Isn't this simple? */ -static int sx_carrier_raised(struct tty_port *port) -{ - struct sx_port *sp = container_of(port, struct sx_port, gs.port); - return ((sx_read_channel_byte(sp, hi_ip) & IP_DCD) != 0); -} - -/* Jeez. Isn't this simple? */ -static int sx_chars_in_buffer(void *ptr) -{ - struct sx_port *port = ptr; - func_enter2(); - - func_exit(); - return ((sx_read_channel_byte(port, hi_txipos) - - sx_read_channel_byte(port, hi_txopos)) & 0xff); -} - -static void sx_shutdown_port(void *ptr) -{ - struct sx_port *port = ptr; - - func_enter(); - - port->gs.port.flags &= ~GS_ACTIVE; - if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { - sx_setsignals(port, 0, 0); - sx_reconfigure_port(port); - } - - func_exit(); -} - -/* ********************************************************************** * - * Here are the routines that actually * - * interface with the rest of the system * - * ********************************************************************** */ - -static int sx_open(struct tty_struct *tty, struct file *filp) -{ - struct sx_port *port; - int retval, line; - unsigned long flags; - - func_enter(); - - if (!sx_initialized) { - return -EIO; - } - - line = tty->index; - sx_dprintk(SX_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p, " - "np=%d)\n", task_pid_nr(current), line, tty, - current->signal->tty, sx_nports); - - if ((line < 0) || (line >= SX_NPORTS) || (line >= sx_nports)) - return -ENODEV; - - port = &sx_ports[line]; - port->c_dcd = 0; /* Make sure that the first interrupt doesn't detect a - 1 -> 0 transition. */ - - sx_dprintk(SX_DEBUG_OPEN, "port = %p c_dcd = %d\n", port, port->c_dcd); - - spin_lock_irqsave(&port->gs.driver_lock, flags); - - tty->driver_data = port; - port->gs.port.tty = tty; - port->gs.port.count++; - spin_unlock_irqrestore(&port->gs.driver_lock, flags); - - sx_dprintk(SX_DEBUG_OPEN, "starting port\n"); - - /* - * Start up serial port - */ - retval = gs_init_port(&port->gs); - sx_dprintk(SX_DEBUG_OPEN, "done gs_init\n"); - if (retval) { - port->gs.port.count--; - return retval; - } - - port->gs.port.flags |= GS_ACTIVE; - if (port->gs.port.count <= 1) - sx_setsignals(port, 1, 1); - -#if 0 - if (sx_debug & SX_DEBUG_OPEN) - my_hd(port, sizeof(*port)); -#else - if (sx_debug & SX_DEBUG_OPEN) - my_hd_io(port->board->base + port->ch_base, sizeof(*port)); -#endif - - if (port->gs.port.count <= 1) { - if (sx_send_command(port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) { - printk(KERN_ERR "sx: Card didn't respond to LOPEN " - "command.\n"); - spin_lock_irqsave(&port->gs.driver_lock, flags); - port->gs.port.count--; - spin_unlock_irqrestore(&port->gs.driver_lock, flags); - return -EIO; - } - } - - retval = gs_block_til_ready(port, filp); - sx_dprintk(SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n", - retval, port->gs.port.count); - - if (retval) { -/* - * Don't lower gs.port.count here because sx_close() will be called later - */ - - return retval; - } - /* tty->low_latency = 1; */ - - port->c_dcd = sx_carrier_raised(&port->gs.port); - sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd); - - func_exit(); - return 0; - -} - -static void sx_close(void *ptr) -{ - struct sx_port *port = ptr; - /* Give the port 5 seconds to close down. */ - int to = 5 * HZ; - - func_enter(); - - sx_setsignals(port, 0, 0); - sx_reconfigure_port(port); - sx_send_command(port, HS_CLOSE, 0, 0); - - while (to-- && (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED)) - if (msleep_interruptible(10)) - break; - if (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) { - if (sx_send_command(port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED) - != 1) { - printk(KERN_ERR "sx: sent the force_close command, but " - "card didn't react\n"); - } else - sx_dprintk(SX_DEBUG_CLOSE, "sent the force_close " - "command.\n"); - } - - sx_dprintk(SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n", - 5 * HZ - to - 1, port->gs.port.count); - - if (port->gs.port.count) { - sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n", - port->gs.port.count); - /*printk("%s SETTING port count to zero: %p count: %d\n", - __func__, port, port->gs.port.count); - port->gs.port.count = 0;*/ - } - - func_exit(); -} - -/* This is relatively thorough. But then again it is only 20 lines. */ -#define MARCHUP for (i = min; i < max; i++) -#define MARCHDOWN for (i = max - 1; i >= min; i--) -#define W0 write_sx_byte(board, i, 0x55) -#define W1 write_sx_byte(board, i, 0xaa) -#define R0 if (read_sx_byte(board, i) != 0x55) return 1 -#define R1 if (read_sx_byte(board, i) != 0xaa) return 1 - -/* This memtest takes a human-noticable time. You normally only do it - once a boot, so I guess that it is worth it. */ -static int do_memtest(struct sx_board *board, int min, int max) -{ - int i; - - /* This is a marchb. Theoretically, marchb catches much more than - simpler tests. In practise, the longer test just catches more - intermittent errors. -- REW - (For the theory behind memory testing see: - Testing Semiconductor Memories by A.J. van de Goor.) */ - MARCHUP { - W0; - } - MARCHUP { - R0; - W1; - R1; - W0; - R0; - W1; - } - MARCHUP { - R1; - W0; - W1; - } - MARCHDOWN { - R1; - W0; - W1; - W0; - } - MARCHDOWN { - R0; - W1; - W0; - } - - return 0; -} - -#undef MARCHUP -#undef MARCHDOWN -#undef W0 -#undef W1 -#undef R0 -#undef R1 - -#define MARCHUP for (i = min; i < max; i += 2) -#define MARCHDOWN for (i = max - 1; i >= min; i -= 2) -#define W0 write_sx_word(board, i, 0x55aa) -#define W1 write_sx_word(board, i, 0xaa55) -#define R0 if (read_sx_word(board, i) != 0x55aa) return 1 -#define R1 if (read_sx_word(board, i) != 0xaa55) return 1 - -#if 0 -/* This memtest takes a human-noticable time. You normally only do it - once a boot, so I guess that it is worth it. */ -static int do_memtest_w(struct sx_board *board, int min, int max) -{ - int i; - - MARCHUP { - W0; - } - MARCHUP { - R0; - W1; - R1; - W0; - R0; - W1; - } - MARCHUP { - R1; - W0; - W1; - } - MARCHDOWN { - R1; - W0; - W1; - W0; - } - MARCHDOWN { - R0; - W1; - W0; - } - - return 0; -} -#endif - -static long sx_fw_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg) -{ - long rc = 0; - int __user *descr = (int __user *)arg; - int i; - static struct sx_board *board = NULL; - int nbytes, offset; - unsigned long data; - char *tmp; - - func_enter(); - - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - - tty_lock(); - - sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg); - - if (!board) - board = &boards[0]; - if (board->flags & SX_BOARD_PRESENT) { - sx_dprintk(SX_DEBUG_FIRMWARE, "Board present! (%x)\n", - board->flags); - } else { - sx_dprintk(SX_DEBUG_FIRMWARE, "Board not present! (%x) all:", - board->flags); - for (i = 0; i < SX_NBOARDS; i++) - sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags); - sx_dprintk(SX_DEBUG_FIRMWARE, "\n"); - rc = -EIO; - goto out; - } - - switch (cmd) { - case SXIO_SET_BOARD: - sx_dprintk(SX_DEBUG_FIRMWARE, "set board to %ld\n", arg); - rc = -EIO; - if (arg >= SX_NBOARDS) - break; - sx_dprintk(SX_DEBUG_FIRMWARE, "not out of range\n"); - if (!(boards[arg].flags & SX_BOARD_PRESENT)) - break; - sx_dprintk(SX_DEBUG_FIRMWARE, ".. and present!\n"); - board = &boards[arg]; - rc = 0; - /* FIXME: And this does ... nothing?? */ - break; - case SXIO_GET_TYPE: - rc = -ENOENT; /* If we manage to miss one, return error. */ - if (IS_SX_BOARD(board)) - rc = SX_TYPE_SX; - if (IS_CF_BOARD(board)) - rc = SX_TYPE_CF; - if (IS_SI_BOARD(board)) - rc = SX_TYPE_SI; - if (IS_SI1_BOARD(board)) - rc = SX_TYPE_SI; - if (IS_EISA_BOARD(board)) - rc = SX_TYPE_SI; - sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc); - break; - case SXIO_DO_RAMTEST: - if (sx_initialized) { /* Already initialized: better not ramtest the board. */ - rc = -EPERM; - break; - } - if (IS_SX_BOARD(board)) { - rc = do_memtest(board, 0, 0x7000); - if (!rc) - rc = do_memtest(board, 0, 0x7000); - /*if (!rc) rc = do_memtest_w (board, 0, 0x7000); */ - } else { - rc = do_memtest(board, 0, 0x7ff8); - /* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */ - } - sx_dprintk(SX_DEBUG_FIRMWARE, - "returning memtest result= %ld\n", rc); - break; - case SXIO_DOWNLOAD: - if (sx_initialized) {/* Already initialized */ - rc = -EEXIST; - break; - } - if (!sx_reset(board)) { - rc = -EIO; - break; - } - sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); - - tmp = kmalloc(SX_CHUNK_SIZE, GFP_USER); - if (!tmp) { - rc = -ENOMEM; - break; - } - /* FIXME: check returns */ - get_user(nbytes, descr++); - get_user(offset, descr++); - get_user(data, descr++); - while (nbytes && data) { - for (i = 0; i < nbytes; i += SX_CHUNK_SIZE) { - if (copy_from_user(tmp, (char __user *)data + i, - (i + SX_CHUNK_SIZE > nbytes) ? - nbytes - i : SX_CHUNK_SIZE)) { - kfree(tmp); - rc = -EFAULT; - goto out; - } - memcpy_toio(board->base2 + offset + i, tmp, - (i + SX_CHUNK_SIZE > nbytes) ? - nbytes - i : SX_CHUNK_SIZE); - } - - get_user(nbytes, descr++); - get_user(offset, descr++); - get_user(data, descr++); - } - kfree(tmp); - sx_nports += sx_init_board(board); - rc = sx_nports; - break; - case SXIO_INIT: - if (sx_initialized) { /* Already initialized */ - rc = -EEXIST; - break; - } - /* This is not allowed until all boards are initialized... */ - for (i = 0; i < SX_NBOARDS; i++) { - if ((boards[i].flags & SX_BOARD_PRESENT) && - !(boards[i].flags & SX_BOARD_INITIALIZED)) { - rc = -EIO; - break; - } - } - for (i = 0; i < SX_NBOARDS; i++) - if (!(boards[i].flags & SX_BOARD_PRESENT)) - break; - - sx_dprintk(SX_DEBUG_FIRMWARE, "initing portstructs, %d boards, " - "%d channels, first board: %d ports\n", - i, sx_nports, boards[0].nports); - rc = sx_init_portstructs(i, sx_nports); - sx_init_drivers(); - if (rc >= 0) - sx_initialized++; - break; - case SXIO_SETDEBUG: - sx_debug = arg; - break; - case SXIO_GETDEBUG: - rc = sx_debug; - break; - case SXIO_GETGSDEBUG: - case SXIO_SETGSDEBUG: - rc = -EINVAL; - break; - case SXIO_GETNPORTS: - rc = sx_nports; - break; - default: - rc = -ENOTTY; - break; - } -out: - tty_unlock(); - func_exit(); - return rc; -} - -static int sx_break(struct tty_struct *tty, int flag) -{ - struct sx_port *port = tty->driver_data; - int rv; - - func_enter(); - tty_lock(); - - if (flag) - rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK); - else - rv = sx_send_command(port, HS_STOP, -1, HS_IDLE_OPEN); - if (rv != 1) - printk(KERN_ERR "sx: couldn't send break (%x).\n", - read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat))); - tty_unlock(); - func_exit(); - return 0; -} - -static int sx_tiocmget(struct tty_struct *tty) -{ - struct sx_port *port = tty->driver_data; - return sx_getsignals(port); -} - -static int sx_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct sx_port *port = tty->driver_data; - int rts = -1, dtr = -1; - - if (set & TIOCM_RTS) - rts = 1; - if (set & TIOCM_DTR) - dtr = 1; - if (clear & TIOCM_RTS) - rts = 0; - if (clear & TIOCM_DTR) - dtr = 0; - - sx_setsignals(port, dtr, rts); - sx_reconfigure_port(port); - return 0; -} - -static int sx_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - int rc; - struct sx_port *port = tty->driver_data; - void __user *argp = (void __user *)arg; - - /* func_enter2(); */ - - rc = 0; - tty_lock(); - switch (cmd) { - case TIOCGSERIAL: - rc = gs_getserial(&port->gs, argp); - break; - case TIOCSSERIAL: - rc = gs_setserial(&port->gs, argp); - break; - default: - rc = -ENOIOCTLCMD; - break; - } - tty_unlock(); - - /* func_exit(); */ - return rc; -} - -/* The throttle/unthrottle scheme for the Specialix card is different - * from other drivers and deserves some explanation. - * The Specialix hardware takes care of XON/XOFF - * and CTS/RTS flow control itself. This means that all we have to - * do when signalled by the upper tty layer to throttle/unthrottle is - * to make a note of it here. When we come to read characters from the - * rx buffers on the card (sx_receive_chars()) we look to see if the - * upper layer can accept more (as noted here in sx_rx_throt[]). - * If it can't we simply don't remove chars from the cards buffer. - * When the tty layer can accept chars, we again note that here and when - * sx_receive_chars() is called it will remove them from the cards buffer. - * The card will notice that a ports buffer has drained below some low - * water mark and will unflow control the line itself, using whatever - * flow control scheme is in use for that port. -- Simon Allen - */ - -static void sx_throttle(struct tty_struct *tty) -{ - struct sx_port *port = tty->driver_data; - - func_enter2(); - /* If the port is using any type of input flow - * control then throttle the port. - */ - if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) { - port->gs.port.flags |= SX_RX_THROTTLE; - } - func_exit(); -} - -static void sx_unthrottle(struct tty_struct *tty) -{ - struct sx_port *port = tty->driver_data; - - func_enter2(); - /* Always unthrottle even if flow control is not enabled on - * this port in case we disabled flow control while the port - * was throttled - */ - port->gs.port.flags &= ~SX_RX_THROTTLE; - func_exit(); - return; -} - -/* ********************************************************************** * - * Here are the initialization routines. * - * ********************************************************************** */ - -static int sx_init_board(struct sx_board *board) -{ - int addr; - int chans; - int type; - - func_enter(); - - /* This is preceded by downloading the download code. */ - - board->flags |= SX_BOARD_INITIALIZED; - - if (read_sx_byte(board, 0)) - /* CF boards may need this. */ - write_sx_byte(board, 0, 0); - - /* This resets the processor again, to make sure it didn't do any - foolish things while we were downloading the image */ - if (!sx_reset(board)) - return 0; - - sx_start_board(board); - udelay(10); - if (!sx_busy_wait_neq(board, 0, 0xff, 0)) { - printk(KERN_ERR "sx: Ooops. Board won't initialize.\n"); - return 0; - } - - /* Ok. So now the processor on the card is running. It gathered - some info for us... */ - sx_dprintk(SX_DEBUG_INIT, "The sxcard structure:\n"); - if (sx_debug & SX_DEBUG_INIT) - my_hd_io(board->base, 0x10); - sx_dprintk(SX_DEBUG_INIT, "the first sx_module structure:\n"); - if (sx_debug & SX_DEBUG_INIT) - my_hd_io(board->base + 0x80, 0x30); - - sx_dprintk(SX_DEBUG_INIT, "init_status: %x, %dk memory, firmware " - "V%x.%02x,\n", - read_sx_byte(board, 0), read_sx_byte(board, 1), - read_sx_byte(board, 5), read_sx_byte(board, 4)); - - if (read_sx_byte(board, 0) == 0xff) { - printk(KERN_INFO "sx: No modules found. Sorry.\n"); - board->nports = 0; - return 0; - } - - chans = 0; - - if (IS_SX_BOARD(board)) { - sx_write_board_word(board, cc_int_count, sx_maxints); - } else { - if (sx_maxints) - sx_write_board_word(board, cc_int_count, - SI_PROCESSOR_CLOCK / 8 / sx_maxints); - } - - /* grab the first module type... */ - /* board->ta_type = mod_compat_type (read_sx_byte (board, 0x80 + 0x08)); */ - board->ta_type = mod_compat_type(sx_read_module_byte(board, 0x80, - mc_chip)); - - /* XXX byteorder */ - for (addr = 0x80; addr != 0; addr = read_sx_word(board, addr) & 0x7fff){ - type = sx_read_module_byte(board, addr, mc_chip); - sx_dprintk(SX_DEBUG_INIT, "Module at %x: %d channels\n", - addr, read_sx_byte(board, addr + 2)); - - chans += sx_read_module_byte(board, addr, mc_type); - - sx_dprintk(SX_DEBUG_INIT, "module is an %s, which has %s/%s " - "panels\n", - mod_type_s(type), - pan_type_s(sx_read_module_byte(board, addr, - mc_mods) & 0xf), - pan_type_s(sx_read_module_byte(board, addr, - mc_mods) >> 4)); - - sx_dprintk(SX_DEBUG_INIT, "CD1400 versions: %x/%x, ASIC " - "version: %x\n", - sx_read_module_byte(board, addr, mc_rev1), - sx_read_module_byte(board, addr, mc_rev2), - sx_read_module_byte(board, addr, mc_mtaasic_rev)); - - /* The following combinations are illegal: It should theoretically - work, but timing problems make the bus HANG. */ - - if (mod_compat_type(type) != board->ta_type) { - printk(KERN_ERR "sx: This is an invalid " - "configuration.\nDon't mix TA/MTA/SXDC on the " - "same hostadapter.\n"); - chans = 0; - break; - } - if ((IS_EISA_BOARD(board) || - IS_SI_BOARD(board)) && - (mod_compat_type(type) == 4)) { - printk(KERN_ERR "sx: This is an invalid " - "configuration.\nDon't use SXDCs on an SI/XIO " - "adapter.\n"); - chans = 0; - break; - } -#if 0 /* Problem fixed: firmware 3.05 */ - if (IS_SX_BOARD(board) && (type == TA8)) { - /* There are some issues with the firmware and the DCD/RTS - lines. It might work if you tie them together or something. - It might also work if you get a newer sx_firmware. Therefore - this is just a warning. */ - printk(KERN_WARNING - "sx: The SX host doesn't work too well " - "with the TA8 adapters.\nSpecialix is working on it.\n"); - } -#endif - } - - if (chans) { - if (board->irq > 0) { - /* fixed irq, probably PCI */ - if (sx_irqmask & (1 << board->irq)) { /* may we use this irq? */ - if (request_irq(board->irq, sx_interrupt, - IRQF_SHARED | IRQF_DISABLED, - "sx", board)) { - printk(KERN_ERR "sx: Cannot allocate " - "irq %d.\n", board->irq); - board->irq = 0; - } - } else - board->irq = 0; - } else if (board->irq < 0 && sx_irqmask) { - /* auto-allocate irq */ - int irqnr; - int irqmask = sx_irqmask & (IS_SX_BOARD(board) ? - SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK); - for (irqnr = 15; irqnr > 0; irqnr--) - if (irqmask & (1 << irqnr)) - if (!request_irq(irqnr, sx_interrupt, - IRQF_SHARED | IRQF_DISABLED, - "sx", board)) - break; - if (!irqnr) - printk(KERN_ERR "sx: Cannot allocate IRQ.\n"); - board->irq = irqnr; - } else - board->irq = 0; - - if (board->irq) { - /* Found a valid interrupt, start up interrupts! */ - sx_dprintk(SX_DEBUG_INIT, "Using irq %d.\n", - board->irq); - sx_start_interrupts(board); - board->poll = sx_slowpoll; - board->flags |= SX_IRQ_ALLOCATED; - } else { - /* no irq: setup board for polled operation */ - board->poll = sx_poll; - sx_dprintk(SX_DEBUG_INIT, "Using poll-interval %d.\n", - board->poll); - } - - /* The timer should be initialized anyway: That way we can - safely del_timer it when the module is unloaded. */ - setup_timer(&board->timer, sx_pollfunc, (unsigned long)board); - - if (board->poll) - mod_timer(&board->timer, jiffies + board->poll); - } else { - board->irq = 0; - } - - board->nports = chans; - sx_dprintk(SX_DEBUG_INIT, "returning %d ports.", board->nports); - - func_exit(); - return chans; -} - -static void __devinit printheader(void) -{ - static int header_printed; - - if (!header_printed) { - printk(KERN_INFO "Specialix SX driver " - "(C) 1998/1999 R.E.Wolff@BitWizard.nl\n"); - printk(KERN_INFO "sx: version " __stringify(SX_VERSION) "\n"); - header_printed = 1; - } -} - -static int __devinit probe_sx(struct sx_board *board) -{ - struct vpd_prom vpdp; - char *p; - int i; - - func_enter(); - - if (!IS_CF_BOARD(board)) { - sx_dprintk(SX_DEBUG_PROBE, "Going to verify vpd prom at %p.\n", - board->base + SX_VPD_ROM); - - if (sx_debug & SX_DEBUG_PROBE) - my_hd_io(board->base + SX_VPD_ROM, 0x40); - - p = (char *)&vpdp; - for (i = 0; i < sizeof(struct vpd_prom); i++) - *p++ = read_sx_byte(board, SX_VPD_ROM + i * 2); - - if (sx_debug & SX_DEBUG_PROBE) - my_hd(&vpdp, 0x20); - - sx_dprintk(SX_DEBUG_PROBE, "checking identifier...\n"); - - if (strncmp(vpdp.identifier, SX_VPD_IDENT_STRING, 16) != 0) { - sx_dprintk(SX_DEBUG_PROBE, "Got non-SX identifier: " - "'%s'\n", vpdp.identifier); - return 0; - } - } - - printheader(); - - if (!IS_CF_BOARD(board)) { - printk(KERN_DEBUG "sx: Found an SX board at %lx\n", - board->hw_base); - printk(KERN_DEBUG "sx: hw_rev: %d, assembly level: %d, " - "uniq ID:%08x, ", - vpdp.hwrev, vpdp.hwass, vpdp.uniqid); - printk("Manufactured: %d/%d\n", 1970 + vpdp.myear, vpdp.mweek); - - if ((((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) != - SX_PCI_UNIQUEID1) && (((vpdp.uniqid >> 24) & - SX_UNIQUEID_MASK) != SX_ISA_UNIQUEID1)) { - /* This might be a bit harsh. This was the primary - reason the SX/ISA card didn't work at first... */ - printk(KERN_ERR "sx: Hmm. Not an SX/PCI or SX/ISA " - "card. Sorry: giving up.\n"); - return (0); - } - - if (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) == - SX_ISA_UNIQUEID1) { - if (((unsigned long)board->hw_base) & 0x8000) { - printk(KERN_WARNING "sx: Warning: There may be " - "hardware problems with the card at " - "%lx.\n", board->hw_base); - printk(KERN_WARNING "sx: Read sx.txt for more " - "info.\n"); - } - } - } - - board->nports = -1; - - /* This resets the processor, and keeps it off the bus. */ - if (!sx_reset(board)) - return 0; - sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); - - func_exit(); - return 1; -} - -#if defined(CONFIG_ISA) || defined(CONFIG_EISA) - -/* Specialix probes for this card at 32k increments from 640k to 16M. - I consider machines with less than 16M unlikely nowadays, so I'm - not probing above 1Mb. Also, 0xa0000, 0xb0000, are taken by the VGA - card. 0xe0000 and 0xf0000 are taken by the BIOS. That only leaves - 0xc0000, 0xc8000, 0xd0000 and 0xd8000 . */ - -static int __devinit probe_si(struct sx_board *board) -{ - int i; - - func_enter(); - sx_dprintk(SX_DEBUG_PROBE, "Going to verify SI signature hw %lx at " - "%p.\n", board->hw_base, board->base + SI2_ISA_ID_BASE); - - if (sx_debug & SX_DEBUG_PROBE) - my_hd_io(board->base + SI2_ISA_ID_BASE, 0x8); - - if (!IS_EISA_BOARD(board)) { - if (IS_SI1_BOARD(board)) { - for (i = 0; i < 8; i++) { - write_sx_byte(board, SI2_ISA_ID_BASE + 7 - i,i); - } - } - for (i = 0; i < 8; i++) { - if ((read_sx_byte(board, SI2_ISA_ID_BASE + 7 - i) & 7) - != i) { - func_exit(); - return 0; - } - } - } - - /* Now we're pretty much convinced that there is an SI board here, - but to prevent trouble, we'd better double check that we don't - have an SI1 board when we're probing for an SI2 board.... */ - - write_sx_byte(board, SI2_ISA_ID_BASE, 0x10); - if (IS_SI1_BOARD(board)) { - /* This should be an SI1 board, which has this - location writable... */ - if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) { - func_exit(); - return 0; - } - } else { - /* This should be an SI2 board, which has the bottom - 3 bits non-writable... */ - if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) { - func_exit(); - return 0; - } - } - - /* Now we're pretty much convinced that there is an SI board here, - but to prevent trouble, we'd better double check that we don't - have an SI1 board when we're probing for an SI2 board.... */ - - write_sx_byte(board, SI2_ISA_ID_BASE, 0x10); - if (IS_SI1_BOARD(board)) { - /* This should be an SI1 board, which has this - location writable... */ - if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) { - func_exit(); - return 0; - } - } else { - /* This should be an SI2 board, which has the bottom - 3 bits non-writable... */ - if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) { - func_exit(); - return 0; - } - } - - printheader(); - - printk(KERN_DEBUG "sx: Found an SI board at %lx\n", board->hw_base); - /* Compared to the SX boards, it is a complete guess as to what - this card is up to... */ - - board->nports = -1; - - /* This resets the processor, and keeps it off the bus. */ - if (!sx_reset(board)) - return 0; - sx_dprintk(SX_DEBUG_INIT, "reset the board...\n"); - - func_exit(); - return 1; -} -#endif - -static const struct tty_operations sx_ops = { - .break_ctl = sx_break, - .open = sx_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = sx_ioctl, - .throttle = sx_throttle, - .unthrottle = sx_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, - .tiocmget = sx_tiocmget, - .tiocmset = sx_tiocmset, -}; - -static const struct tty_port_operations sx_port_ops = { - .carrier_raised = sx_carrier_raised, -}; - -static int sx_init_drivers(void) -{ - int error; - - func_enter(); - - sx_driver = alloc_tty_driver(sx_nports); - if (!sx_driver) - return 1; - sx_driver->owner = THIS_MODULE; - sx_driver->driver_name = "specialix_sx"; - sx_driver->name = "ttyX"; - sx_driver->major = SX_NORMAL_MAJOR; - sx_driver->type = TTY_DRIVER_TYPE_SERIAL; - sx_driver->subtype = SERIAL_TYPE_NORMAL; - sx_driver->init_termios = tty_std_termios; - sx_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - sx_driver->init_termios.c_ispeed = 9600; - sx_driver->init_termios.c_ospeed = 9600; - sx_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(sx_driver, &sx_ops); - - if ((error = tty_register_driver(sx_driver))) { - put_tty_driver(sx_driver); - printk(KERN_ERR "sx: Couldn't register sx driver, error = %d\n", - error); - return 1; - } - func_exit(); - return 0; -} - -static int sx_init_portstructs(int nboards, int nports) -{ - struct sx_board *board; - struct sx_port *port; - int i, j; - int addr, chans; - int portno; - - func_enter(); - - /* Many drivers statically allocate the maximum number of ports - There is no reason not to allocate them dynamically. - Is there? -- REW */ - sx_ports = kcalloc(nports, sizeof(struct sx_port), GFP_KERNEL); - if (!sx_ports) - return -ENOMEM; - - port = sx_ports; - for (i = 0; i < nboards; i++) { - board = &boards[i]; - board->ports = port; - for (j = 0; j < boards[i].nports; j++) { - sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j); - tty_port_init(&port->gs.port); - port->gs.port.ops = &sx_port_ops; - port->gs.magic = SX_MAGIC; - port->gs.close_delay = HZ / 2; - port->gs.closing_wait = 30 * HZ; - port->board = board; - port->gs.rd = &sx_real_driver; -#ifdef NEW_WRITE_LOCKING - port->gs.port_write_mutex = MUTEX; -#endif - spin_lock_init(&port->gs.driver_lock); - /* - * Initializing wait queue - */ - port++; - } - } - - port = sx_ports; - portno = 0; - for (i = 0; i < nboards; i++) { - board = &boards[i]; - board->port_base = portno; - /* Possibly the configuration was rejected. */ - sx_dprintk(SX_DEBUG_PROBE, "Board has %d channels\n", - board->nports); - if (board->nports <= 0) - continue; - /* XXX byteorder ?? */ - for (addr = 0x80; addr != 0; - addr = read_sx_word(board, addr) & 0x7fff) { - chans = sx_read_module_byte(board, addr, mc_type); - sx_dprintk(SX_DEBUG_PROBE, "Module at %x: %d " - "channels\n", addr, chans); - sx_dprintk(SX_DEBUG_PROBE, "Port at"); - for (j = 0; j < chans; j++) { - /* The "sx-way" is the way it SHOULD be done. - That way in the future, the firmware may for - example pack the structures a bit more - efficient. Neil tells me it isn't going to - happen anytime soon though. */ - if (IS_SX_BOARD(board)) - port->ch_base = sx_read_module_word( - board, addr + j * 2, - mc_chan_pointer); - else - port->ch_base = addr + 0x100 + 0x300 *j; - - sx_dprintk(SX_DEBUG_PROBE, " %x", - port->ch_base); - port->line = portno++; - port++; - } - sx_dprintk(SX_DEBUG_PROBE, "\n"); - } - /* This has to be done earlier. */ - /* board->flags |= SX_BOARD_INITIALIZED; */ - } - - func_exit(); - return 0; -} - -static unsigned int sx_find_free_board(void) -{ - unsigned int i; - - for (i = 0; i < SX_NBOARDS; i++) - if (!(boards[i].flags & SX_BOARD_PRESENT)) - break; - - return i; -} - -static void __exit sx_release_drivers(void) -{ - func_enter(); - tty_unregister_driver(sx_driver); - put_tty_driver(sx_driver); - func_exit(); -} - -static void __devexit sx_remove_card(struct sx_board *board, - struct pci_dev *pdev) -{ - if (board->flags & SX_BOARD_INITIALIZED) { - /* The board should stop messing with us. (actually I mean the - interrupt) */ - sx_reset(board); - if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED)) - free_irq(board->irq, board); - - /* It is safe/allowed to del_timer a non-active timer */ - del_timer(&board->timer); - if (pdev) { -#ifdef CONFIG_PCI - iounmap(board->base2); - pci_release_region(pdev, IS_CF_BOARD(board) ? 3 : 2); -#endif - } else { - iounmap(board->base); - release_region(board->hw_base, board->hw_len); - } - - board->flags &= ~(SX_BOARD_INITIALIZED | SX_BOARD_PRESENT); - } -} - -#ifdef CONFIG_EISA - -static int __devinit sx_eisa_probe(struct device *dev) -{ - struct eisa_device *edev = to_eisa_device(dev); - struct sx_board *board; - unsigned long eisa_slot = edev->base_addr; - unsigned int i; - int retval = -EIO; - - mutex_lock(&sx_boards_lock); - i = sx_find_free_board(); - if (i == SX_NBOARDS) { - mutex_unlock(&sx_boards_lock); - goto err; - } - board = &boards[i]; - board->flags |= SX_BOARD_PRESENT; - mutex_unlock(&sx_boards_lock); - - dev_info(dev, "XIO : Signature found in EISA slot %lu, " - "Product %d Rev %d (REPORT THIS TO LKLM)\n", - eisa_slot >> 12, - inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 2), - inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 3)); - - board->eisa_base = eisa_slot; - board->flags &= ~SX_BOARD_TYPE; - board->flags |= SI_EISA_BOARD; - - board->hw_base = ((inb(eisa_slot + 0xc01) << 8) + - inb(eisa_slot + 0xc00)) << 16; - board->hw_len = SI2_EISA_WINDOW_LEN; - if (!request_region(board->hw_base, board->hw_len, "sx")) { - dev_err(dev, "can't request region\n"); - goto err_flag; - } - board->base2 = - board->base = ioremap_nocache(board->hw_base, SI2_EISA_WINDOW_LEN); - if (!board->base) { - dev_err(dev, "can't remap memory\n"); - goto err_reg; - } - - sx_dprintk(SX_DEBUG_PROBE, "IO hw_base address: %lx\n", board->hw_base); - sx_dprintk(SX_DEBUG_PROBE, "base: %p\n", board->base); - board->irq = inb(eisa_slot + 0xc02) >> 4; - sx_dprintk(SX_DEBUG_PROBE, "IRQ: %d\n", board->irq); - - if (!probe_si(board)) - goto err_unmap; - - dev_set_drvdata(dev, board); - - return 0; -err_unmap: - iounmap(board->base); -err_reg: - release_region(board->hw_base, board->hw_len); -err_flag: - board->flags &= ~SX_BOARD_PRESENT; -err: - return retval; -} - -static int __devexit sx_eisa_remove(struct device *dev) -{ - struct sx_board *board = dev_get_drvdata(dev); - - sx_remove_card(board, NULL); - - return 0; -} - -static struct eisa_device_id sx_eisa_tbl[] = { - { "SLX" }, - { "" } -}; - -MODULE_DEVICE_TABLE(eisa, sx_eisa_tbl); - -static struct eisa_driver sx_eisadriver = { - .id_table = sx_eisa_tbl, - .driver = { - .name = "sx", - .probe = sx_eisa_probe, - .remove = __devexit_p(sx_eisa_remove), - } -}; - -#endif - -#ifdef CONFIG_PCI - /******************************************************** - * Setting bit 17 in the CNTRL register of the PLX 9050 * - * chip forces a retry on writes while a read is pending.* - * This is to prevent the card locking up on Intel Xeon * - * multiprocessor systems with the NX chipset. -- NV * - ********************************************************/ - -/* Newer cards are produced with this bit set from the configuration - EEprom. As the bit is read/write for the CPU, we can fix it here, - if we detect that it isn't set correctly. -- REW */ - -static void __devinit fix_sx_pci(struct pci_dev *pdev, struct sx_board *board) -{ - unsigned int hwbase; - void __iomem *rebase; - unsigned int t; - -#define CNTRL_REG_OFFSET 0x50 -#define CNTRL_REG_GOODVALUE 0x18260000 - - pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase); - hwbase &= PCI_BASE_ADDRESS_MEM_MASK; - rebase = ioremap_nocache(hwbase, 0x80); - t = readl(rebase + CNTRL_REG_OFFSET); - if (t != CNTRL_REG_GOODVALUE) { - printk(KERN_DEBUG "sx: performing cntrl reg fix: %08x -> " - "%08x\n", t, CNTRL_REG_GOODVALUE); - writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET); - } - iounmap(rebase); -} -#endif - -static int __devinit sx_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ -#ifdef CONFIG_PCI - struct sx_board *board; - unsigned int i, reg; - int retval = -EIO; - - mutex_lock(&sx_boards_lock); - i = sx_find_free_board(); - if (i == SX_NBOARDS) { - mutex_unlock(&sx_boards_lock); - goto err; - } - board = &boards[i]; - board->flags |= SX_BOARD_PRESENT; - mutex_unlock(&sx_boards_lock); - - retval = pci_enable_device(pdev); - if (retval) - goto err_flag; - - board->flags &= ~SX_BOARD_TYPE; - board->flags |= (pdev->subsystem_vendor == 0x200) ? SX_PCI_BOARD : - SX_CFPCI_BOARD; - - /* CF boards use base address 3.... */ - reg = IS_CF_BOARD(board) ? 3 : 2; - retval = pci_request_region(pdev, reg, "sx"); - if (retval) { - dev_err(&pdev->dev, "can't request region\n"); - goto err_flag; - } - board->hw_base = pci_resource_start(pdev, reg); - board->base2 = - board->base = ioremap_nocache(board->hw_base, WINDOW_LEN(board)); - if (!board->base) { - dev_err(&pdev->dev, "ioremap failed\n"); - goto err_reg; - } - - /* Most of the stuff on the CF board is offset by 0x18000 .... */ - if (IS_CF_BOARD(board)) - board->base += 0x18000; - - board->irq = pdev->irq; - - dev_info(&pdev->dev, "Got a specialix card: %p(%d) %x.\n", board->base, - board->irq, board->flags); - - if (!probe_sx(board)) { - retval = -EIO; - goto err_unmap; - } - - fix_sx_pci(pdev, board); - - pci_set_drvdata(pdev, board); - - return 0; -err_unmap: - iounmap(board->base2); -err_reg: - pci_release_region(pdev, reg); -err_flag: - board->flags &= ~SX_BOARD_PRESENT; -err: - return retval; -#else - return -ENODEV; -#endif -} - -static void __devexit sx_pci_remove(struct pci_dev *pdev) -{ - struct sx_board *board = pci_get_drvdata(pdev); - - sx_remove_card(board, pdev); -} - -/* Specialix has a whole bunch of cards with 0x2000 as the device ID. They say - its because the standard requires it. So check for SUBVENDOR_ID. */ -static struct pci_device_id sx_pci_tbl[] = { - { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, - .subvendor = PCI_ANY_ID, .subdevice = 0x0200 }, - { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, - .subvendor = PCI_ANY_ID, .subdevice = 0x0300 }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, sx_pci_tbl); - -static struct pci_driver sx_pcidriver = { - .name = "sx", - .id_table = sx_pci_tbl, - .probe = sx_pci_probe, - .remove = __devexit_p(sx_pci_remove) -}; - -static int __init sx_init(void) -{ -#ifdef CONFIG_EISA - int retval1; -#endif -#ifdef CONFIG_ISA - struct sx_board *board; - unsigned int i; -#endif - unsigned int found = 0; - int retval; - - func_enter(); - sx_dprintk(SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n", - sx_debug); - if (abs((long)(&sx_debug) - sx_debug) < 0x10000) { - printk(KERN_WARNING "sx: sx_debug is an address, instead of a " - "value. Assuming -1.\n(%p)\n", &sx_debug); - sx_debug = -1; - } - - if (misc_register(&sx_fw_device) < 0) { - printk(KERN_ERR "SX: Unable to register firmware loader " - "driver.\n"); - return -EIO; - } -#ifdef CONFIG_ISA - for (i = 0; i < NR_SX_ADDRS; i++) { - board = &boards[found]; - board->hw_base = sx_probe_addrs[i]; - board->hw_len = SX_WINDOW_LEN; - if (!request_region(board->hw_base, board->hw_len, "sx")) - continue; - board->base2 = - board->base = ioremap_nocache(board->hw_base, board->hw_len); - if (!board->base) - goto err_sx_reg; - board->flags &= ~SX_BOARD_TYPE; - board->flags |= SX_ISA_BOARD; - board->irq = sx_irqmask ? -1 : 0; - - if (probe_sx(board)) { - board->flags |= SX_BOARD_PRESENT; - found++; - } else { - iounmap(board->base); -err_sx_reg: - release_region(board->hw_base, board->hw_len); - } - } - - for (i = 0; i < NR_SI_ADDRS; i++) { - board = &boards[found]; - board->hw_base = si_probe_addrs[i]; - board->hw_len = SI2_ISA_WINDOW_LEN; - if (!request_region(board->hw_base, board->hw_len, "sx")) - continue; - board->base2 = - board->base = ioremap_nocache(board->hw_base, board->hw_len); - if (!board->base) - goto err_si_reg; - board->flags &= ~SX_BOARD_TYPE; - board->flags |= SI_ISA_BOARD; - board->irq = sx_irqmask ? -1 : 0; - - if (probe_si(board)) { - board->flags |= SX_BOARD_PRESENT; - found++; - } else { - iounmap(board->base); -err_si_reg: - release_region(board->hw_base, board->hw_len); - } - } - for (i = 0; i < NR_SI1_ADDRS; i++) { - board = &boards[found]; - board->hw_base = si1_probe_addrs[i]; - board->hw_len = SI1_ISA_WINDOW_LEN; - if (!request_region(board->hw_base, board->hw_len, "sx")) - continue; - board->base2 = - board->base = ioremap_nocache(board->hw_base, board->hw_len); - if (!board->base) - goto err_si1_reg; - board->flags &= ~SX_BOARD_TYPE; - board->flags |= SI1_ISA_BOARD; - board->irq = sx_irqmask ? -1 : 0; - - if (probe_si(board)) { - board->flags |= SX_BOARD_PRESENT; - found++; - } else { - iounmap(board->base); -err_si1_reg: - release_region(board->hw_base, board->hw_len); - } - } -#endif -#ifdef CONFIG_EISA - retval1 = eisa_driver_register(&sx_eisadriver); -#endif - retval = pci_register_driver(&sx_pcidriver); - - if (found) { - printk(KERN_INFO "sx: total of %d boards detected.\n", found); - retval = 0; - } else if (retval) { -#ifdef CONFIG_EISA - retval = retval1; - if (retval1) -#endif - misc_deregister(&sx_fw_device); - } - - func_exit(); - return retval; -} - -static void __exit sx_exit(void) -{ - int i; - - func_enter(); -#ifdef CONFIG_EISA - eisa_driver_unregister(&sx_eisadriver); -#endif - pci_unregister_driver(&sx_pcidriver); - - for (i = 0; i < SX_NBOARDS; i++) - sx_remove_card(&boards[i], NULL); - - if (misc_deregister(&sx_fw_device) < 0) { - printk(KERN_INFO "sx: couldn't deregister firmware loader " - "device\n"); - } - sx_dprintk(SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n", - sx_initialized); - if (sx_initialized) - sx_release_drivers(); - - kfree(sx_ports); - func_exit(); -} - -module_init(sx_init); -module_exit(sx_exit); diff --git a/drivers/char/sx.h b/drivers/char/sx.h deleted file mode 100644 index 87c2def..0000000 --- a/drivers/char/sx.h +++ /dev/null @@ -1,201 +0,0 @@ - -/* - * sx.h - * - * Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl - * - * SX serial driver. - * -- Supports SI, XIO and SX host cards. - * -- Supports TAs, MTAs and SXDCs. - * - * Version 1.3 -- March, 1999. - * - */ - -#define SX_NBOARDS 4 -#define SX_PORTSPERBOARD 32 -#define SX_NPORTS (SX_NBOARDS * SX_PORTSPERBOARD) - -#ifdef __KERNEL__ - -#define SX_MAGIC 0x12345678 - -struct sx_port { - struct gs_port gs; - struct wait_queue *shutdown_wait; - int ch_base; - int c_dcd; - struct sx_board *board; - int line; - unsigned long locks; -}; - -struct sx_board { - int magic; - void __iomem *base; - void __iomem *base2; - unsigned long hw_base; - resource_size_t hw_len; - int eisa_base; - int port_base; /* Number of the first port */ - struct sx_port *ports; - int nports; - int flags; - int irq; - int poll; - int ta_type; - struct timer_list timer; - unsigned long locks; -}; - -struct vpd_prom { - unsigned short id; - char hwrev; - char hwass; - int uniqid; - char myear; - char mweek; - char hw_feature[5]; - char oem_id; - char identifier[16]; -}; - -#ifndef MOD_RS232DB25MALE -#define MOD_RS232DB25MALE 0x0a -#endif - -#define SI_ISA_BOARD 0x00000001 -#define SX_ISA_BOARD 0x00000002 -#define SX_PCI_BOARD 0x00000004 -#define SX_CFPCI_BOARD 0x00000008 -#define SX_CFISA_BOARD 0x00000010 -#define SI_EISA_BOARD 0x00000020 -#define SI1_ISA_BOARD 0x00000040 - -#define SX_BOARD_PRESENT 0x00001000 -#define SX_BOARD_INITIALIZED 0x00002000 -#define SX_IRQ_ALLOCATED 0x00004000 - -#define SX_BOARD_TYPE 0x000000ff - -#define IS_SX_BOARD(board) (board->flags & (SX_PCI_BOARD | SX_CFPCI_BOARD | \ - SX_ISA_BOARD | SX_CFISA_BOARD)) - -#define IS_SI_BOARD(board) (board->flags & SI_ISA_BOARD) -#define IS_SI1_BOARD(board) (board->flags & SI1_ISA_BOARD) - -#define IS_EISA_BOARD(board) (board->flags & SI_EISA_BOARD) - -#define IS_CF_BOARD(board) (board->flags & (SX_CFISA_BOARD | SX_CFPCI_BOARD)) - -/* The SI processor clock is required to calculate the cc_int_count register - value for the SI cards. */ -#define SI_PROCESSOR_CLOCK 25000000 - - -/* port flags */ -/* Make sure these don't clash with gs flags or async flags */ -#define SX_RX_THROTTLE 0x0000001 - - - -#define SX_PORT_TRANSMIT_LOCK 0 -#define SX_BOARD_INTR_LOCK 0 - - - -/* Debug flags. Add these together to get more debug info. */ - -#define SX_DEBUG_OPEN 0x00000001 -#define SX_DEBUG_SETTING 0x00000002 -#define SX_DEBUG_FLOW 0x00000004 -#define SX_DEBUG_MODEMSIGNALS 0x00000008 -#define SX_DEBUG_TERMIOS 0x00000010 -#define SX_DEBUG_TRANSMIT 0x00000020 -#define SX_DEBUG_RECEIVE 0x00000040 -#define SX_DEBUG_INTERRUPTS 0x00000080 -#define SX_DEBUG_PROBE 0x00000100 -#define SX_DEBUG_INIT 0x00000200 -#define SX_DEBUG_CLEANUP 0x00000400 -#define SX_DEBUG_CLOSE 0x00000800 -#define SX_DEBUG_FIRMWARE 0x00001000 -#define SX_DEBUG_MEMTEST 0x00002000 - -#define SX_DEBUG_ALL 0xffffffff - - -#define O_OTHER(tty) \ - ((O_OLCUC(tty)) ||\ - (O_ONLCR(tty)) ||\ - (O_OCRNL(tty)) ||\ - (O_ONOCR(tty)) ||\ - (O_ONLRET(tty)) ||\ - (O_OFILL(tty)) ||\ - (O_OFDEL(tty)) ||\ - (O_NLDLY(tty)) ||\ - (O_CRDLY(tty)) ||\ - (O_TABDLY(tty)) ||\ - (O_BSDLY(tty)) ||\ - (O_VTDLY(tty)) ||\ - (O_FFDLY(tty))) - -/* Same for input. */ -#define I_OTHER(tty) \ - ((I_INLCR(tty)) ||\ - (I_IGNCR(tty)) ||\ - (I_ICRNL(tty)) ||\ - (I_IUCLC(tty)) ||\ - (L_ISIG(tty))) - -#define MOD_TA ( TA>>4) -#define MOD_MTA (MTA_CD1400>>4) -#define MOD_SXDC ( SXDC>>4) - - -/* We copy the download code over to the card in chunks of ... bytes */ -#define SX_CHUNK_SIZE 128 - -#endif /* __KERNEL__ */ - - - -/* Specialix document 6210046-11 page 3 */ -#define SPX(X) (('S'<<24) | ('P' << 16) | (X)) - -/* Specialix-Linux specific IOCTLS. */ -#define SPXL(X) (SPX(('L' << 8) | (X))) - - -#define SXIO_SET_BOARD SPXL(0x01) -#define SXIO_GET_TYPE SPXL(0x02) -#define SXIO_DOWNLOAD SPXL(0x03) -#define SXIO_INIT SPXL(0x04) -#define SXIO_SETDEBUG SPXL(0x05) -#define SXIO_GETDEBUG SPXL(0x06) -#define SXIO_DO_RAMTEST SPXL(0x07) -#define SXIO_SETGSDEBUG SPXL(0x08) -#define SXIO_GETGSDEBUG SPXL(0x09) -#define SXIO_GETNPORTS SPXL(0x0a) - - -#ifndef SXCTL_MISC_MINOR -/* Allow others to gather this into "major.h" or something like that */ -#define SXCTL_MISC_MINOR 167 -#endif - -#ifndef SX_NORMAL_MAJOR -/* This allows overriding on the compiler commandline, or in a "major.h" - include or something like that */ -#define SX_NORMAL_MAJOR 32 -#define SX_CALLOUT_MAJOR 33 -#endif - - -#define SX_TYPE_SX 0x01 -#define SX_TYPE_SI 0x02 -#define SX_TYPE_CF 0x03 - - -#define WINDOW_LEN(board) (IS_CF_BOARD(board)?0x20000:SX_WINDOW_LEN) -/* Need a #define for ^^^^^^^ !!! */ - diff --git a/drivers/char/sxboards.h b/drivers/char/sxboards.h deleted file mode 100644 index 427927d..0000000 --- a/drivers/char/sxboards.h +++ /dev/null @@ -1,206 +0,0 @@ -/************************************************************************/ -/* */ -/* Title : SX/SI/XIO Board Hardware Definitions */ -/* */ -/* Author : N.P.Vassallo */ -/* */ -/* Creation : 16th March 1998 */ -/* */ -/* Version : 3.0.0 */ -/* */ -/* Copyright : (c) Specialix International Ltd. 1998 */ -/* */ -/* Description : Prototypes, structures and definitions */ -/* describing the SX/SI/XIO board hardware */ -/* */ -/************************************************************************/ - -/* History... - -3.0.0 16/03/98 NPV Creation. - -*/ - -#ifndef _sxboards_h /* If SXBOARDS.H not already defined */ -#define _sxboards_h 1 - -/***************************************************************************** -******************************* ****************************** -******************************* Board Types ****************************** -******************************* ****************************** -*****************************************************************************/ - -/* BUS types... */ -#define BUS_ISA 0 -#define BUS_MCA 1 -#define BUS_EISA 2 -#define BUS_PCI 3 - -/* Board phases... */ -#define SI1_Z280 1 -#define SI2_Z280 2 -#define SI3_T225 3 - -/* Board types... */ -#define CARD_TYPE(bus,phase) (bus<<4|phase) -#define CARD_BUS(type) ((type>>4)&0xF) -#define CARD_PHASE(type) (type&0xF) - -#define TYPE_SI1_ISA CARD_TYPE(BUS_ISA,SI1_Z280) -#define TYPE_SI2_ISA CARD_TYPE(BUS_ISA,SI2_Z280) -#define TYPE_SI2_EISA CARD_TYPE(BUS_EISA,SI2_Z280) -#define TYPE_SI2_PCI CARD_TYPE(BUS_PCI,SI2_Z280) - -#define TYPE_SX_ISA CARD_TYPE(BUS_ISA,SI3_T225) -#define TYPE_SX_PCI CARD_TYPE(BUS_PCI,SI3_T225) -/***************************************************************************** -****************************** ****************************** -****************************** Phase 1 Z280 ****************************** -****************************** ****************************** -*****************************************************************************/ - -/* ISA board details... */ -#define SI1_ISA_WINDOW_LEN 0x10000 /* 64 Kbyte shared memory window */ -//#define SI1_ISA_MEMORY_LEN 0x8000 /* Usable memory - unused define*/ -//#define SI1_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ -//#define SI1_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ -//#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */ -//#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */ - -/* ISA board, register definitions... */ -//#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */ -#define SI1_ISA_RESET 0x8000 /* WRITE: Host Reset */ -#define SI1_ISA_RESET_CLEAR 0xc000 /* WRITE: Host Reset clear*/ -#define SI1_ISA_WAIT 0x9000 /* WRITE: Host wait */ -#define SI1_ISA_WAIT_CLEAR 0xd000 /* WRITE: Host wait clear */ -#define SI1_ISA_INTCL 0xa000 /* WRITE: Host Reset */ -#define SI1_ISA_INTCL_CLEAR 0xe000 /* WRITE: Host Reset */ - - -/***************************************************************************** -****************************** ****************************** -****************************** Phase 2 Z280 ****************************** -****************************** ****************************** -*****************************************************************************/ - -/* ISA board details... */ -#define SI2_ISA_WINDOW_LEN 0x8000 /* 32 Kbyte shared memory window */ -#define SI2_ISA_MEMORY_LEN 0x7FF8 /* Usable memory */ -#define SI2_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ -#define SI2_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ -#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */ -#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */ - -/* ISA board, register definitions... */ -#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */ -#define SI2_ISA_RESET SI2_ISA_ID_BASE /* WRITE: Host Reset */ -#define SI2_ISA_IRQ11 (SI2_ISA_ID_BASE+1) /* WRITE: Set IRQ11 */ -#define SI2_ISA_IRQ12 (SI2_ISA_ID_BASE+2) /* WRITE: Set IRQ12 */ -#define SI2_ISA_IRQ15 (SI2_ISA_ID_BASE+3) /* WRITE: Set IRQ15 */ -#define SI2_ISA_IRQSET (SI2_ISA_ID_BASE+4) /* WRITE: Set Host Interrupt */ -#define SI2_ISA_INTCLEAR (SI2_ISA_ID_BASE+5) /* WRITE: Enable Host Interrupt */ - -#define SI2_ISA_IRQ11_SET 0x10 -#define SI2_ISA_IRQ11_CLEAR 0x00 -#define SI2_ISA_IRQ12_SET 0x10 -#define SI2_ISA_IRQ12_CLEAR 0x00 -#define SI2_ISA_IRQ15_SET 0x10 -#define SI2_ISA_IRQ15_CLEAR 0x00 -#define SI2_ISA_INTCLEAR_SET 0x10 -#define SI2_ISA_INTCLEAR_CLEAR 0x00 -#define SI2_ISA_IRQSET_CLEAR 0x10 -#define SI2_ISA_IRQSET_SET 0x00 -#define SI2_ISA_RESET_SET 0x00 -#define SI2_ISA_RESET_CLEAR 0x10 - -/* PCI board details... */ -#define SI2_PCI_WINDOW_LEN 0x100000 /* 1 Mbyte memory window */ - -/* PCI board register definitions... */ -#define SI2_PCI_SET_IRQ 0x40001 /* Set Host Interrupt */ -#define SI2_PCI_RESET 0xC0001 /* Host Reset */ - -/***************************************************************************** -****************************** ****************************** -****************************** Phase 3 T225 ****************************** -****************************** ****************************** -*****************************************************************************/ - -/* General board details... */ -#define SX_WINDOW_LEN 64*1024 /* 64 Kbyte memory window */ - -/* ISA board details... */ -#define SX_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */ -#define SX_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */ -#define SX_ISA_ADDR_STEP SX_WINDOW_LEN /* ISA board address step */ -#define SX_ISA_IRQ_MASK 0x9E00 /* IRQs 15,12,11,10,9 */ - -/* Hardware register definitions... */ -#define SX_EVENT_STATUS 0x7800 /* READ: T225 Event Status */ -#define SX_EVENT_STROBE 0x7800 /* WRITE: T225 Event Strobe */ -#define SX_EVENT_ENABLE 0x7880 /* WRITE: T225 Event Enable */ -#define SX_VPD_ROM 0x7C00 /* READ: Vital Product Data ROM */ -#define SX_CONFIG 0x7C00 /* WRITE: Host Configuration Register */ -#define SX_IRQ_STATUS 0x7C80 /* READ: Host Interrupt Status */ -#define SX_SET_IRQ 0x7C80 /* WRITE: Set Host Interrupt */ -#define SX_RESET_STATUS 0x7D00 /* READ: Host Reset Status */ -#define SX_RESET 0x7D00 /* WRITE: Host Reset */ -#define SX_RESET_IRQ 0x7D80 /* WRITE: Reset Host Interrupt */ - -/* SX_VPD_ROM definitions... */ -#define SX_VPD_SLX_ID1 0x00 -#define SX_VPD_SLX_ID2 0x01 -#define SX_VPD_HW_REV 0x02 -#define SX_VPD_HW_ASSEM 0x03 -#define SX_VPD_UNIQUEID4 0x04 -#define SX_VPD_UNIQUEID3 0x05 -#define SX_VPD_UNIQUEID2 0x06 -#define SX_VPD_UNIQUEID1 0x07 -#define SX_VPD_MANU_YEAR 0x08 -#define SX_VPD_MANU_WEEK 0x09 -#define SX_VPD_IDENT 0x10 -#define SX_VPD_IDENT_STRING "JET HOST BY KEV#" - -/* SX unique identifiers... */ -#define SX_UNIQUEID_MASK 0xF0 -#define SX_ISA_UNIQUEID1 0x20 -#define SX_PCI_UNIQUEID1 0x50 - -/* SX_CONFIG definitions... */ -#define SX_CONF_BUSEN 0x02 /* Enable T225 memory and I/O */ -#define SX_CONF_HOSTIRQ 0x04 /* Enable board to host interrupt */ - -/* SX bootstrap... */ -#define SX_BOOTSTRAP "\x28\x20\x21\x02\x60\x0a" -#define SX_BOOTSTRAP_SIZE 6 -#define SX_BOOTSTRAP_ADDR (0x8000-SX_BOOTSTRAP_SIZE) - -/***************************************************************************** -********************************** ********************************** -********************************** EISA ********************************** -********************************** ********************************** -*****************************************************************************/ - -#define SI2_EISA_OFF 0x42 -#define SI2_EISA_VAL 0x01 -#define SI2_EISA_WINDOW_LEN 0x10000 - -/***************************************************************************** -*********************************** ********************************** -*********************************** PCI ********************************** -*********************************** ********************************** -*****************************************************************************/ - -/* General definitions... */ - -#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */ -#define SPX_DEVICE_ID 0x4000 /* SI/XIO boards */ -#define SPX_PLXDEVICE_ID 0x2000 /* SX boards */ - -#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */ -#define SI2_SUB_SYS_ID 0x400 /* Phase 2 (Z280) board */ -#define SX_SUB_SYS_ID 0x200 /* Phase 3 (t225) board */ - -#endif /*_sxboards_h */ - -/* End of SXBOARDS.H */ diff --git a/drivers/char/sxwindow.h b/drivers/char/sxwindow.h deleted file mode 100644 index cf01b66..0000000 --- a/drivers/char/sxwindow.h +++ /dev/null @@ -1,393 +0,0 @@ -/************************************************************************/ -/* */ -/* Title : SX Shared Memory Window Structure */ -/* */ -/* Author : N.P.Vassallo */ -/* */ -/* Creation : 16th March 1998 */ -/* */ -/* Version : 3.0.0 */ -/* */ -/* Copyright : (c) Specialix International Ltd. 1998 */ -/* */ -/* Description : Prototypes, structures and definitions */ -/* describing the SX/SI/XIO cards shared */ -/* memory window structure: */ -/* SXCARD */ -/* SXMODULE */ -/* SXCHANNEL */ -/* */ -/************************************************************************/ - -/* History... - -3.0.0 16/03/98 NPV Creation. (based on STRUCT.H) - -*/ - -#ifndef _sxwindow_h /* If SXWINDOW.H not already defined */ -#define _sxwindow_h 1 - -/***************************************************************************** -*************************** *************************** -*************************** Common Definitions *************************** -*************************** *************************** -*****************************************************************************/ - -typedef struct _SXCARD *PSXCARD; /* SXCARD structure pointer */ -typedef struct _SXMODULE *PMOD; /* SXMODULE structure pointer */ -typedef struct _SXCHANNEL *PCHAN; /* SXCHANNEL structure pointer */ - -/***************************************************************************** -********************************* ********************************* -********************************* SXCARD ********************************* -********************************* ********************************* -*****************************************************************************/ - -typedef struct _SXCARD -{ - BYTE cc_init_status; /* 0x00 Initialisation status */ - BYTE cc_mem_size; /* 0x01 Size of memory on card */ - WORD cc_int_count; /* 0x02 Interrupt count */ - WORD cc_revision; /* 0x04 Download code revision */ - BYTE cc_isr_count; /* 0x06 Count when ISR is run */ - BYTE cc_main_count; /* 0x07 Count when main loop is run */ - WORD cc_int_pending; /* 0x08 Interrupt pending */ - WORD cc_poll_count; /* 0x0A Count when poll is run */ - BYTE cc_int_set_count; /* 0x0C Count when host interrupt is set */ - BYTE cc_rfu[0x80 - 0x0D]; /* 0x0D Pad structure to 128 bytes (0x80) */ - -} SXCARD; - -/* SXCARD.cc_init_status definitions... */ -#define ADAPTERS_FOUND (BYTE)0x01 -#define NO_ADAPTERS_FOUND (BYTE)0xFF - -/* SXCARD.cc_mem_size definitions... */ -#define SX_MEMORY_SIZE (BYTE)0x40 - -/* SXCARD.cc_int_count definitions... */ -#define INT_COUNT_DEFAULT 100 /* Hz */ - -/***************************************************************************** -******************************** ******************************** -******************************** SXMODULE ******************************** -******************************** ******************************** -*****************************************************************************/ - -#define TOP_POINTER(a) ((a)|0x8000) /* Sets top bit of word */ -#define UNTOP_POINTER(a) ((a)&~0x8000) /* Clears top bit of word */ - -typedef struct _SXMODULE -{ - WORD mc_next; /* 0x00 Next module "pointer" (ORed with 0x8000) */ - BYTE mc_type; /* 0x02 Type of TA in terms of number of channels */ - BYTE mc_mod_no; /* 0x03 Module number on SI bus cable (0 closest to card) */ - BYTE mc_dtr; /* 0x04 Private DTR copy (TA only) */ - BYTE mc_rfu1; /* 0x05 Reserved */ - WORD mc_uart; /* 0x06 UART base address for this module */ - BYTE mc_chip; /* 0x08 Chip type / number of ports */ - BYTE mc_current_uart; /* 0x09 Current uart selected for this module */ -#ifdef DOWNLOAD - PCHAN mc_chan_pointer[8]; /* 0x0A Pointer to each channel structure */ -#else - WORD mc_chan_pointer[8]; /* 0x0A Define as WORD if not compiling into download */ -#endif - WORD mc_rfu2; /* 0x1A Reserved */ - BYTE mc_opens1; /* 0x1C Number of open ports on first four ports on MTA/SXDC */ - BYTE mc_opens2; /* 0x1D Number of open ports on second four ports on MTA/SXDC */ - BYTE mc_mods; /* 0x1E Types of connector module attached to MTA/SXDC */ - BYTE mc_rev1; /* 0x1F Revision of first CD1400 on MTA/SXDC */ - BYTE mc_rev2; /* 0x20 Revision of second CD1400 on MTA/SXDC */ - BYTE mc_mtaasic_rev; /* 0x21 Revision of MTA ASIC 1..4 -> A, B, C, D */ - BYTE mc_rfu3[0x100 - 0x22]; /* 0x22 Pad structure to 256 bytes (0x100) */ - -} SXMODULE; - -/* SXMODULE.mc_type definitions... */ -#define FOUR_PORTS (BYTE)4 -#define EIGHT_PORTS (BYTE)8 - -/* SXMODULE.mc_chip definitions... */ -#define CHIP_MASK 0xF0 -#define TA (BYTE)0 -#define TA4 (TA | FOUR_PORTS) -#define TA8 (TA | EIGHT_PORTS) -#define TA4_ASIC (BYTE)0x0A -#define TA8_ASIC (BYTE)0x0B -#define MTA_CD1400 (BYTE)0x28 -#define SXDC (BYTE)0x48 - -/* SXMODULE.mc_mods definitions... */ -#define MOD_RS232DB25 0x00 /* RS232 DB25 (socket/plug) */ -#define MOD_RS232RJ45 0x01 /* RS232 RJ45 (shielded/opto-isolated) */ -#define MOD_RESERVED_2 0x02 /* Reserved (RS485) */ -#define MOD_RS422DB25 0x03 /* RS422 DB25 Socket */ -#define MOD_RESERVED_4 0x04 /* Reserved */ -#define MOD_PARALLEL 0x05 /* Parallel */ -#define MOD_RESERVED_6 0x06 /* Reserved (RS423) */ -#define MOD_RESERVED_7 0x07 /* Reserved */ -#define MOD_2_RS232DB25 0x08 /* Rev 2.0 RS232 DB25 (socket/plug) */ -#define MOD_2_RS232RJ45 0x09 /* Rev 2.0 RS232 RJ45 */ -#define MOD_RESERVED_A 0x0A /* Rev 2.0 Reserved */ -#define MOD_2_RS422DB25 0x0B /* Rev 2.0 RS422 DB25 */ -#define MOD_RESERVED_C 0x0C /* Rev 2.0 Reserved */ -#define MOD_2_PARALLEL 0x0D /* Rev 2.0 Parallel */ -#define MOD_RESERVED_E 0x0E /* Rev 2.0 Reserved */ -#define MOD_BLANK 0x0F /* Blank Panel */ - -/***************************************************************************** -******************************** ******************************* -******************************** SXCHANNEL ******************************* -******************************** ******************************* -*****************************************************************************/ - -#define TX_BUFF_OFFSET 0x60 /* Transmit buffer offset in channel structure */ -#define BUFF_POINTER(a) (((a)+TX_BUFF_OFFSET)|0x8000) -#define UNBUFF_POINTER(a) (jet_channel*)(((a)&~0x8000)-TX_BUFF_OFFSET) -#define BUFFER_SIZE 256 -#define HIGH_WATER ((BUFFER_SIZE / 4) * 3) -#define LOW_WATER (BUFFER_SIZE / 4) - -typedef struct _SXCHANNEL -{ - WORD next_item; /* 0x00 Offset from window base of next channels hi_txbuf (ORred with 0x8000) */ - WORD addr_uart; /* 0x02 INTERNAL pointer to uart address. Includes FASTPATH bit */ - WORD module; /* 0x04 Offset from window base of parent SXMODULE structure */ - BYTE type; /* 0x06 Chip type / number of ports (copy of mc_chip) */ - BYTE chan_number; /* 0x07 Channel number on the TA/MTA/SXDC */ - WORD xc_status; /* 0x08 Flow control and I/O status */ - BYTE hi_rxipos; /* 0x0A Receive buffer input index */ - BYTE hi_rxopos; /* 0x0B Receive buffer output index */ - BYTE hi_txopos; /* 0x0C Transmit buffer output index */ - BYTE hi_txipos; /* 0x0D Transmit buffer input index */ - BYTE hi_hstat; /* 0x0E Command register */ - BYTE dtr_bit; /* 0x0F INTERNAL DTR control byte (TA only) */ - BYTE txon; /* 0x10 INTERNAL copy of hi_txon */ - BYTE txoff; /* 0x11 INTERNAL copy of hi_txoff */ - BYTE rxon; /* 0x12 INTERNAL copy of hi_rxon */ - BYTE rxoff; /* 0x13 INTERNAL copy of hi_rxoff */ - BYTE hi_mr1; /* 0x14 Mode Register 1 (databits,parity,RTS rx flow)*/ - BYTE hi_mr2; /* 0x15 Mode Register 2 (stopbits,local,CTS tx flow)*/ - BYTE hi_csr; /* 0x16 Clock Select Register (baud rate) */ - BYTE hi_op; /* 0x17 Modem Output Signal */ - BYTE hi_ip; /* 0x18 Modem Input Signal */ - BYTE hi_state; /* 0x19 Channel status */ - BYTE hi_prtcl; /* 0x1A Channel protocol (flow control) */ - BYTE hi_txon; /* 0x1B Transmit XON character */ - BYTE hi_txoff; /* 0x1C Transmit XOFF character */ - BYTE hi_rxon; /* 0x1D Receive XON character */ - BYTE hi_rxoff; /* 0x1E Receive XOFF character */ - BYTE close_prev; /* 0x1F INTERNAL channel previously closed flag */ - BYTE hi_break; /* 0x20 Break and error control */ - BYTE break_state; /* 0x21 INTERNAL copy of hi_break */ - BYTE hi_mask; /* 0x22 Mask for received data */ - BYTE mask; /* 0x23 INTERNAL copy of hi_mask */ - BYTE mod_type; /* 0x24 MTA/SXDC hardware module type */ - BYTE ccr_state; /* 0x25 INTERNAL MTA/SXDC state of CCR register */ - BYTE ip_mask; /* 0x26 Input handshake mask */ - BYTE hi_parallel; /* 0x27 Parallel port flag */ - BYTE par_error; /* 0x28 Error code for parallel loopback test */ - BYTE any_sent; /* 0x29 INTERNAL data sent flag */ - BYTE asic_txfifo_size; /* 0x2A INTERNAL SXDC transmit FIFO size */ - BYTE rfu1[2]; /* 0x2B Reserved */ - BYTE csr; /* 0x2D INTERNAL copy of hi_csr */ -#ifdef DOWNLOAD - PCHAN nextp; /* 0x2E Offset from window base of next channel structure */ -#else - WORD nextp; /* 0x2E Define as WORD if not compiling into download */ -#endif - BYTE prtcl; /* 0x30 INTERNAL copy of hi_prtcl */ - BYTE mr1; /* 0x31 INTERNAL copy of hi_mr1 */ - BYTE mr2; /* 0x32 INTERNAL copy of hi_mr2 */ - BYTE hi_txbaud; /* 0x33 Extended transmit baud rate (SXDC only if((hi_csr&0x0F)==0x0F) */ - BYTE hi_rxbaud; /* 0x34 Extended receive baud rate (SXDC only if((hi_csr&0xF0)==0xF0) */ - BYTE txbreak_state; /* 0x35 INTERNAL MTA/SXDC transmit break state */ - BYTE txbaud; /* 0x36 INTERNAL copy of hi_txbaud */ - BYTE rxbaud; /* 0x37 INTERNAL copy of hi_rxbaud */ - WORD err_framing; /* 0x38 Count of receive framing errors */ - WORD err_parity; /* 0x3A Count of receive parity errors */ - WORD err_overrun; /* 0x3C Count of receive overrun errors */ - WORD err_overflow; /* 0x3E Count of receive buffer overflow errors */ - BYTE rfu2[TX_BUFF_OFFSET - 0x40]; /* 0x40 Reserved until hi_txbuf */ - BYTE hi_txbuf[BUFFER_SIZE]; /* 0x060 Transmit buffer */ - BYTE hi_rxbuf[BUFFER_SIZE]; /* 0x160 Receive buffer */ - BYTE rfu3[0x300 - 0x260]; /* 0x260 Reserved until 768 bytes (0x300) */ - -} SXCHANNEL; - -/* SXCHANNEL.addr_uart definitions... */ -#define FASTPATH 0x1000 /* Set to indicate fast rx/tx processing (TA only) */ - -/* SXCHANNEL.xc_status definitions... */ -#define X_TANY 0x0001 /* XON is any character (TA only) */ -#define X_TION 0x0001 /* Tx interrupts on (MTA only) */ -#define X_TXEN 0x0002 /* Tx XON/XOFF enabled (TA only) */ -#define X_RTSEN 0x0002 /* RTS FLOW enabled (MTA only) */ -#define X_TXRC 0x0004 /* XOFF received (TA only) */ -#define X_RTSLOW 0x0004 /* RTS dropped (MTA only) */ -#define X_RXEN 0x0008 /* Rx XON/XOFF enabled */ -#define X_ANYXO 0x0010 /* XOFF pending/sent or RTS dropped */ -#define X_RXSE 0x0020 /* Rx XOFF sent */ -#define X_NPEND 0x0040 /* Rx XON pending or XOFF pending */ -#define X_FPEND 0x0080 /* Rx XOFF pending */ -#define C_CRSE 0x0100 /* Carriage return sent (TA only) */ -#define C_TEMR 0x0100 /* Tx empty requested (MTA only) */ -#define C_TEMA 0x0200 /* Tx empty acked (MTA only) */ -#define C_ANYP 0x0200 /* Any protocol bar tx XON/XOFF (TA only) */ -#define C_EN 0x0400 /* Cooking enabled (on MTA means port is also || */ -#define C_HIGH 0x0800 /* Buffer previously hit high water */ -#define C_CTSEN 0x1000 /* CTS automatic flow-control enabled */ -#define C_DCDEN 0x2000 /* DCD/DTR checking enabled */ -#define C_BREAK 0x4000 /* Break detected */ -#define C_RTSEN 0x8000 /* RTS automatic flow control enabled (MTA only) */ -#define C_PARITY 0x8000 /* Parity checking enabled (TA only) */ - -/* SXCHANNEL.hi_hstat definitions... */ -#define HS_IDLE_OPEN 0x00 /* Channel open state */ -#define HS_LOPEN 0x02 /* Local open command (no modem monitoring) */ -#define HS_MOPEN 0x04 /* Modem open command (wait for DCD signal) */ -#define HS_IDLE_MPEND 0x06 /* Waiting for DCD signal state */ -#define HS_CONFIG 0x08 /* Configuration command */ -#define HS_CLOSE 0x0A /* Close command */ -#define HS_START 0x0C /* Start transmit break command */ -#define HS_STOP 0x0E /* Stop transmit break command */ -#define HS_IDLE_CLOSED 0x10 /* Closed channel state */ -#define HS_IDLE_BREAK 0x12 /* Transmit break state */ -#define HS_FORCE_CLOSED 0x14 /* Force close command */ -#define HS_RESUME 0x16 /* Clear pending XOFF command */ -#define HS_WFLUSH 0x18 /* Flush transmit buffer command */ -#define HS_RFLUSH 0x1A /* Flush receive buffer command */ -#define HS_SUSPEND 0x1C /* Suspend output command (like XOFF received) */ -#define PARALLEL 0x1E /* Parallel port loopback test command (Diagnostics Only) */ -#define ENABLE_RX_INTS 0x20 /* Enable receive interrupts command (Diagnostics Only) */ -#define ENABLE_TX_INTS 0x22 /* Enable transmit interrupts command (Diagnostics Only) */ -#define ENABLE_MDM_INTS 0x24 /* Enable modem interrupts command (Diagnostics Only) */ -#define DISABLE_INTS 0x26 /* Disable interrupts command (Diagnostics Only) */ - -/* SXCHANNEL.hi_mr1 definitions... */ -#define MR1_BITS 0x03 /* Data bits mask */ -#define MR1_5_BITS 0x00 /* 5 data bits */ -#define MR1_6_BITS 0x01 /* 6 data bits */ -#define MR1_7_BITS 0x02 /* 7 data bits */ -#define MR1_8_BITS 0x03 /* 8 data bits */ -#define MR1_PARITY 0x1C /* Parity mask */ -#define MR1_ODD 0x04 /* Odd parity */ -#define MR1_EVEN 0x00 /* Even parity */ -#define MR1_WITH 0x00 /* Parity enabled */ -#define MR1_FORCE 0x08 /* Force parity */ -#define MR1_NONE 0x10 /* No parity */ -#define MR1_NOPARITY MR1_NONE /* No parity */ -#define MR1_ODDPARITY (MR1_WITH|MR1_ODD) /* Odd parity */ -#define MR1_EVENPARITY (MR1_WITH|MR1_EVEN) /* Even parity */ -#define MR1_MARKPARITY (MR1_FORCE|MR1_ODD) /* Mark parity */ -#define MR1_SPACEPARITY (MR1_FORCE|MR1_EVEN) /* Space parity */ -#define MR1_RTS_RXFLOW 0x80 /* RTS receive flow control */ - -/* SXCHANNEL.hi_mr2 definitions... */ -#define MR2_STOP 0x0F /* Stop bits mask */ -#define MR2_1_STOP 0x07 /* 1 stop bit */ -#define MR2_2_STOP 0x0F /* 2 stop bits */ -#define MR2_CTS_TXFLOW 0x10 /* CTS transmit flow control */ -#define MR2_RTS_TOGGLE 0x20 /* RTS toggle on transmit */ -#define MR2_NORMAL 0x00 /* Normal mode */ -#define MR2_AUTO 0x40 /* Auto-echo mode (TA only) */ -#define MR2_LOCAL 0x80 /* Local echo mode */ -#define MR2_REMOTE 0xC0 /* Remote echo mode (TA only) */ - -/* SXCHANNEL.hi_csr definitions... */ -#define CSR_75 0x0 /* 75 baud */ -#define CSR_110 0x1 /* 110 baud (TA), 115200 (MTA/SXDC) */ -#define CSR_38400 0x2 /* 38400 baud */ -#define CSR_150 0x3 /* 150 baud */ -#define CSR_300 0x4 /* 300 baud */ -#define CSR_600 0x5 /* 600 baud */ -#define CSR_1200 0x6 /* 1200 baud */ -#define CSR_2000 0x7 /* 2000 baud */ -#define CSR_2400 0x8 /* 2400 baud */ -#define CSR_4800 0x9 /* 4800 baud */ -#define CSR_1800 0xA /* 1800 baud */ -#define CSR_9600 0xB /* 9600 baud */ -#define CSR_19200 0xC /* 19200 baud */ -#define CSR_57600 0xD /* 57600 baud */ -#define CSR_EXTBAUD 0xF /* Extended baud rate (hi_txbaud/hi_rxbaud) */ - -/* SXCHANNEL.hi_op definitions... */ -#define OP_RTS 0x01 /* RTS modem output signal */ -#define OP_DTR 0x02 /* DTR modem output signal */ - -/* SXCHANNEL.hi_ip definitions... */ -#define IP_CTS 0x02 /* CTS modem input signal */ -#define IP_DCD 0x04 /* DCD modem input signal */ -#define IP_DSR 0x20 /* DTR modem input signal */ -#define IP_RI 0x40 /* RI modem input signal */ - -/* SXCHANNEL.hi_state definitions... */ -#define ST_BREAK 0x01 /* Break received (clear with config) */ -#define ST_DCD 0x02 /* DCD signal changed state */ - -/* SXCHANNEL.hi_prtcl definitions... */ -#define SP_TANY 0x01 /* Transmit XON/XANY (if SP_TXEN enabled) */ -#define SP_TXEN 0x02 /* Transmit XON/XOFF flow control */ -#define SP_CEN 0x04 /* Cooking enabled */ -#define SP_RXEN 0x08 /* Rx XON/XOFF enabled */ -#define SP_DCEN 0x20 /* DCD / DTR check */ -#define SP_DTR_RXFLOW 0x40 /* DTR receive flow control */ -#define SP_PAEN 0x80 /* Parity checking enabled */ - -/* SXCHANNEL.hi_break definitions... */ -#define BR_IGN 0x01 /* Ignore any received breaks */ -#define BR_INT 0x02 /* Interrupt on received break */ -#define BR_PARMRK 0x04 /* Enable parmrk parity error processing */ -#define BR_PARIGN 0x08 /* Ignore chars with parity errors */ -#define BR_ERRINT 0x80 /* Treat parity/framing/overrun errors as exceptions */ - -/* SXCHANNEL.par_error definitions.. */ -#define DIAG_IRQ_RX 0x01 /* Indicate serial receive interrupt (diags only) */ -#define DIAG_IRQ_TX 0x02 /* Indicate serial transmit interrupt (diags only) */ -#define DIAG_IRQ_MD 0x04 /* Indicate serial modem interrupt (diags only) */ - -/* SXCHANNEL.hi_txbaud/hi_rxbaud definitions... (SXDC only) */ -#define BAUD_75 0x00 /* 75 baud */ -#define BAUD_115200 0x01 /* 115200 baud */ -#define BAUD_38400 0x02 /* 38400 baud */ -#define BAUD_150 0x03 /* 150 baud */ -#define BAUD_300 0x04 /* 300 baud */ -#define BAUD_600 0x05 /* 600 baud */ -#define BAUD_1200 0x06 /* 1200 baud */ -#define BAUD_2000 0x07 /* 2000 baud */ -#define BAUD_2400 0x08 /* 2400 baud */ -#define BAUD_4800 0x09 /* 4800 baud */ -#define BAUD_1800 0x0A /* 1800 baud */ -#define BAUD_9600 0x0B /* 9600 baud */ -#define BAUD_19200 0x0C /* 19200 baud */ -#define BAUD_57600 0x0D /* 57600 baud */ -#define BAUD_230400 0x0E /* 230400 baud */ -#define BAUD_460800 0x0F /* 460800 baud */ -#define BAUD_921600 0x10 /* 921600 baud */ -#define BAUD_50 0x11 /* 50 baud */ -#define BAUD_110 0x12 /* 110 baud */ -#define BAUD_134_5 0x13 /* 134.5 baud */ -#define BAUD_200 0x14 /* 200 baud */ -#define BAUD_7200 0x15 /* 7200 baud */ -#define BAUD_56000 0x16 /* 56000 baud */ -#define BAUD_64000 0x17 /* 64000 baud */ -#define BAUD_76800 0x18 /* 76800 baud */ -#define BAUD_128000 0x19 /* 128000 baud */ -#define BAUD_150000 0x1A /* 150000 baud */ -#define BAUD_14400 0x1B /* 14400 baud */ -#define BAUD_256000 0x1C /* 256000 baud */ -#define BAUD_28800 0x1D /* 28800 baud */ - -/* SXCHANNEL.txbreak_state definiions... */ -#define TXBREAK_OFF 0 /* Not sending break */ -#define TXBREAK_START 1 /* Begin sending break */ -#define TXBREAK_START1 2 /* Begin sending break, part 1 */ -#define TXBREAK_ON 3 /* Sending break */ -#define TXBREAK_STOP 4 /* Stop sending break */ -#define TXBREAK_STOP1 5 /* Stop sending break, part 1 */ - -#endif /* _sxwindow_h */ - -/* End of SXWINDOW.H */ - diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c deleted file mode 100644 index 9683864..0000000 --- a/drivers/char/vme_scc.c +++ /dev/null @@ -1,1145 +0,0 @@ -/* - * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports - * implementation. - * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk> - * - * Based on atari_SCC.c which was - * Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de> - * Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - */ - -#include <linux/module.h> -#include <linux/kdev_t.h> -#include <asm/io.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/mm.h> -#include <linux/serial.h> -#include <linux/fcntl.h> -#include <linux/major.h> -#include <linux/delay.h> -#include <linux/miscdevice.h> -#include <linux/console.h> -#include <linux/init.h> -#include <asm/setup.h> -#include <asm/bootinfo.h> - -#ifdef CONFIG_MVME147_SCC -#include <asm/mvme147hw.h> -#endif -#ifdef CONFIG_MVME162_SCC -#include <asm/mvme16xhw.h> -#endif -#ifdef CONFIG_BVME6000_SCC -#include <asm/bvme6000hw.h> -#endif - -#include <linux/generic_serial.h> -#include "scc.h" - - -#define CHANNEL_A 0 -#define CHANNEL_B 1 - -#define SCC_MINOR_BASE 64 - -/* Shadows for all SCC write registers */ -static unsigned char scc_shadow[2][16]; - -/* Location to access for SCC register access delay */ -static volatile unsigned char *scc_del = NULL; - -/* To keep track of STATUS_REG state for detection of Ext/Status int source */ -static unsigned char scc_last_status_reg[2]; - -/***************************** Prototypes *****************************/ - -/* Function prototypes */ -static void scc_disable_tx_interrupts(void * ptr); -static void scc_enable_tx_interrupts(void * ptr); -static void scc_disable_rx_interrupts(void * ptr); -static void scc_enable_rx_interrupts(void * ptr); -static int scc_carrier_raised(struct tty_port *port); -static void scc_shutdown_port(void * ptr); -static int scc_set_real_termios(void *ptr); -static void scc_hungup(void *ptr); -static void scc_close(void *ptr); -static int scc_chars_in_buffer(void * ptr); -static int scc_open(struct tty_struct * tty, struct file * filp); -static int scc_ioctl(struct tty_struct * tty, - unsigned int cmd, unsigned long arg); -static void scc_throttle(struct tty_struct *tty); -static void scc_unthrottle(struct tty_struct *tty); -static irqreturn_t scc_tx_int(int irq, void *data); -static irqreturn_t scc_rx_int(int irq, void *data); -static irqreturn_t scc_stat_int(int irq, void *data); -static irqreturn_t scc_spcond_int(int irq, void *data); -static void scc_setsignals(struct scc_port *port, int dtr, int rts); -static int scc_break_ctl(struct tty_struct *tty, int break_state); - -static struct tty_driver *scc_driver; - -static struct scc_port scc_ports[2]; - -/*--------------------------------------------------------------------------- - * Interface from generic_serial.c back here - *--------------------------------------------------------------------------*/ - -static struct real_driver scc_real_driver = { - scc_disable_tx_interrupts, - scc_enable_tx_interrupts, - scc_disable_rx_interrupts, - scc_enable_rx_interrupts, - scc_shutdown_port, - scc_set_real_termios, - scc_chars_in_buffer, - scc_close, - scc_hungup, - NULL -}; - - -static const struct tty_operations scc_ops = { - .open = scc_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = scc_ioctl, - .throttle = scc_throttle, - .unthrottle = scc_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, - .break_ctl = scc_break_ctl, -}; - -static const struct tty_port_operations scc_port_ops = { - .carrier_raised = scc_carrier_raised, -}; - -/*---------------------------------------------------------------------------- - * vme_scc_init() and support functions - *---------------------------------------------------------------------------*/ - -static int __init scc_init_drivers(void) -{ - int error; - - scc_driver = alloc_tty_driver(2); - if (!scc_driver) - return -ENOMEM; - scc_driver->owner = THIS_MODULE; - scc_driver->driver_name = "scc"; - scc_driver->name = "ttyS"; - scc_driver->major = TTY_MAJOR; - scc_driver->minor_start = SCC_MINOR_BASE; - scc_driver->type = TTY_DRIVER_TYPE_SERIAL; - scc_driver->subtype = SERIAL_TYPE_NORMAL; - scc_driver->init_termios = tty_std_termios; - scc_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - scc_driver->init_termios.c_ispeed = 9600; - scc_driver->init_termios.c_ospeed = 9600; - scc_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(scc_driver, &scc_ops); - - if ((error = tty_register_driver(scc_driver))) { - printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n", - error); - put_tty_driver(scc_driver); - return 1; - } - - return 0; -} - - -/* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1). - */ - -static void __init scc_init_portstructs(void) -{ - struct scc_port *port; - int i; - - for (i = 0; i < 2; i++) { - port = scc_ports + i; - tty_port_init(&port->gs.port); - port->gs.port.ops = &scc_port_ops; - port->gs.magic = SCC_MAGIC; - port->gs.close_delay = HZ/2; - port->gs.closing_wait = 30 * HZ; - port->gs.rd = &scc_real_driver; -#ifdef NEW_WRITE_LOCKING - port->gs.port_write_mutex = MUTEX; -#endif - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); - } -} - - -#ifdef CONFIG_MVME147_SCC -static int __init mvme147_scc_init(void) -{ - struct scc_port *port; - int error; - - printk(KERN_INFO "SCC: MVME147 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR; - port->datap = port->ctrlp + 1; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR; - port->datap = port->ctrlp + 1; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Ensure interrupts are enabled in the PCC chip */ - m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB; - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail_free_b_rx: - free_irq(MVME147_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(MVME147_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(MVME147_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(MVME147_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(MVME147_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(MVME147_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(MVME147_IRQ_SCCA_TX, port); -fail: - return error; -} -#endif - - -#ifdef CONFIG_MVME162_SCC -static int __init mvme162_scc_init(void) -{ - struct scc_port *port; - int error; - - if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA)) - return (-ENODEV); - - printk(KERN_INFO "SCC: MVME162 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR; - port->datap = port->ctrlp + 2; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR; - port->datap = port->ctrlp + 2; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); /* Either channel will do */ - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Ensure interrupts are enabled in the MC2 chip */ - *(volatile char *)0xfff4201d = 0x14; - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail_free_b_rx: - free_irq(MVME162_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(MVME162_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(MVME162_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(MVME162_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(MVME162_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(MVME162_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(MVME162_IRQ_SCCA_TX, port); -fail: - return error; -} -#endif - - -#ifdef CONFIG_BVME6000_SCC -static int __init bvme6000_scc_init(void) -{ - struct scc_port *port; - int error; - - printk(KERN_INFO "SCC: BVME6000 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR; - port->datap = port->ctrlp + 4; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR; - port->datap = port->ctrlp + 4; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); /* Either channel will do */ - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail: - free_irq(BVME_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(BVME_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(BVME_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(BVME_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(BVME_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(BVME_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(BVME_IRQ_SCCB_SPCOND, port); -fail_free_b_rx: - return error; -} -#endif - - -static int __init vme_scc_init(void) -{ - int res = -ENODEV; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - res = mvme147_scc_init(); -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - res = mvme162_scc_init(); -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - res = bvme6000_scc_init(); -#endif - return res; -} - -module_init(vme_scc_init); - - -/*--------------------------------------------------------------------------- - * Interrupt handlers - *--------------------------------------------------------------------------*/ - -static irqreturn_t scc_rx_int(int irq, void *data) -{ - unsigned char ch; - struct scc_port *port = data; - struct tty_struct *tty = port->gs.port.tty; - SCC_ACCESS_INIT(port); - - ch = SCCread_NB(RX_DATA_REG); - if (!tty) { - printk(KERN_WARNING "scc_rx_int with NULL tty!\n"); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - tty_insert_flip_char(tty, ch, 0); - - /* Check if another character is already ready; in that case, the - * spcond_int() function must be used, because this character may have an - * error condition that isn't signalled by the interrupt vector used! - */ - if (SCCread(INT_PENDING_REG) & - (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) { - scc_spcond_int (irq, data); - return IRQ_HANDLED; - } - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_spcond_int(int irq, void *data) -{ - struct scc_port *port = data; - struct tty_struct *tty = port->gs.port.tty; - unsigned char stat, ch, err; - int int_pending_mask = port->channel == CHANNEL_A ? - IPR_A_RX : IPR_B_RX; - SCC_ACCESS_INIT(port); - - if (!tty) { - printk(KERN_WARNING "scc_spcond_int with NULL tty!\n"); - SCCwrite(COMMAND_REG, CR_ERROR_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - do { - stat = SCCread(SPCOND_STATUS_REG); - ch = SCCread_NB(RX_DATA_REG); - - if (stat & SCSR_RX_OVERRUN) - err = TTY_OVERRUN; - else if (stat & SCSR_PARITY_ERR) - err = TTY_PARITY; - else if (stat & SCSR_CRC_FRAME_ERR) - err = TTY_FRAME; - else - err = 0; - - tty_insert_flip_char(tty, ch, err); - - /* ++TeSche: *All* errors have to be cleared manually, - * else the condition persists for the next chars - */ - if (err) - SCCwrite(COMMAND_REG, CR_ERROR_RESET); - - } while(SCCread(INT_PENDING_REG) & int_pending_mask); - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_tx_int(int irq, void *data) -{ - struct scc_port *port = data; - SCC_ACCESS_INIT(port); - - if (!port->gs.port.tty) { - printk(KERN_WARNING "scc_tx_int with NULL tty!\n"); - SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) { - if (port->x_char) { - SCCwrite(TX_DATA_REG, port->x_char); - port->x_char = 0; - } - else if ((port->gs.xmit_cnt <= 0) || - port->gs.port.tty->stopped || - port->gs.port.tty->hw_stopped) - break; - else { - SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]); - port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1); - if (--port->gs.xmit_cnt <= 0) - break; - } - } - if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped || - port->gs.port.tty->hw_stopped) { - /* disable tx interrupts */ - SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */ - port->gs.port.flags &= ~GS_TX_INTEN; - } - if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars) - tty_wakeup(port->gs.port.tty); - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_stat_int(int irq, void *data) -{ - struct scc_port *port = data; - unsigned channel = port->channel; - unsigned char last_sr, sr, changed; - SCC_ACCESS_INIT(port); - - last_sr = scc_last_status_reg[channel]; - sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG); - changed = last_sr ^ sr; - - if (changed & SR_DCD) { - port->c_dcd = !!(sr & SR_DCD); - if (!(port->gs.port.flags & ASYNC_CHECK_CD)) - ; /* Don't report DCD changes */ - else if (port->c_dcd) { - wake_up_interruptible(&port->gs.port.open_wait); - } - else { - if (port->gs.port.tty) - tty_hangup (port->gs.port.tty); - } - } - SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; -} - - -/*--------------------------------------------------------------------------- - * generic_serial.c callback funtions - *--------------------------------------------------------------------------*/ - -static void scc_disable_tx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - port->gs.port.flags &= ~GS_TX_INTEN; - local_irq_restore(flags); -} - - -static void scc_enable_tx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB); - /* restart the transmitter */ - scc_tx_int (0, port); - local_irq_restore(flags); -} - - -static void scc_disable_rx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, - ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0); - local_irq_restore(flags); -} - - -static void scc_enable_rx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, 0xff, - IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL); - local_irq_restore(flags); -} - - -static int scc_carrier_raised(struct tty_port *port) -{ - struct scc_port *sc = container_of(port, struct scc_port, gs.port); - unsigned channel = sc->channel; - - return !!(scc_last_status_reg[channel] & SR_DCD); -} - - -static void scc_shutdown_port(void *ptr) -{ - struct scc_port *port = ptr; - - port->gs.port.flags &= ~ GS_ACTIVE; - if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { - scc_setsignals (port, 0, 0); - } -} - - -static int scc_set_real_termios (void *ptr) -{ - /* the SCC has char sizes 5,7,6,8 in that order! */ - static int chsize_map[4] = { 0, 2, 1, 3 }; - unsigned cflag, baud, chsize, channel, brgval = 0; - unsigned long flags; - struct scc_port *port = ptr; - SCC_ACCESS_INIT(port); - - if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; - - channel = port->channel; - - if (channel == CHANNEL_A) - return 0; /* Settings controlled by boot PROM */ - - cflag = port->gs.port.tty->termios->c_cflag; - baud = port->gs.baud; - chsize = (cflag & CSIZE) >> 4; - - if (baud == 0) { - /* speed == 0 -> drop DTR */ - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_DTR, 0); - local_irq_restore(flags); - return 0; - } - else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) || - (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) || - (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) { - printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud); - return 0; - } - - if (cflag & CLOCAL) - port->gs.port.flags &= ~ASYNC_CHECK_CD; - else - port->gs.port.flags |= ASYNC_CHECK_CD; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2; -#endif - /* Now we have all parameters and can go to set them: */ - local_irq_save(flags); - - /* receiver's character size and auto-enables */ - SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE), - (chsize_map[chsize] << 6) | - ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0)); - /* parity and stop bits (both, Tx and Rx), clock mode never changes */ - SCCmod (AUX1_CTRL_REG, - ~(A1CR_PARITY_MASK | A1CR_MODE_MASK), - ((cflag & PARENB - ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN) - : A1CR_PARITY_NONE) - | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1))); - /* sender's character size, set DTR for valid baud rate */ - SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR); - /* clock sources never change */ - /* disable BRG before changing the value */ - SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0); - /* BRG value */ - SCCwrite(TIMER_LOW_REG, brgval & 0xff); - SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff); - /* BRG enable, and clock source never changes */ - SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB); - - local_irq_restore(flags); - - return 0; -} - - -static int scc_chars_in_buffer (void *ptr) -{ - struct scc_port *port = ptr; - SCC_ACCESS_INIT(port); - - return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0 : 1; -} - - -/* Comment taken from sx.c (2.4.0): - I haven't the foggiest why the decrement use count has to happen - here. The whole linux serial drivers stuff needs to be redesigned. - My guess is that this is a hack to minimize the impact of a bug - elsewhere. Thinking about it some more. (try it sometime) Try - running minicom on a serial port that is driven by a modularized - driver. Have the modem hangup. Then remove the driver module. Then - exit minicom. I expect an "oops". -- REW */ - -static void scc_hungup(void *ptr) -{ - scc_disable_tx_interrupts(ptr); - scc_disable_rx_interrupts(ptr); -} - - -static void scc_close(void *ptr) -{ - scc_disable_tx_interrupts(ptr); - scc_disable_rx_interrupts(ptr); -} - - -/*--------------------------------------------------------------------------- - * Internal support functions - *--------------------------------------------------------------------------*/ - -static void scc_setsignals(struct scc_port *port, int dtr, int rts) -{ - unsigned long flags; - unsigned char t; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - t = SCCread(TX_CTRL_REG); - if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR); - if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS); - SCCwrite(TX_CTRL_REG, t); - local_irq_restore(flags); -} - - -static void scc_send_xchar(struct tty_struct *tty, char ch) -{ - struct scc_port *port = tty->driver_data; - - port->x_char = ch; - if (ch) - scc_enable_tx_interrupts(port); -} - - -/*--------------------------------------------------------------------------- - * Driver entrypoints referenced from above - *--------------------------------------------------------------------------*/ - -static int scc_open (struct tty_struct * tty, struct file * filp) -{ - int line = tty->index; - int retval; - struct scc_port *port = &scc_ports[line]; - int i, channel = port->channel; - unsigned long flags; - SCC_ACCESS_INIT(port); -#if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC) - static const struct { - unsigned reg, val; - } mvme_init_tab[] = { - /* Values for MVME162 and MVME147 */ - /* no parity, 1 stop bit, async, 1:16 */ - { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, - /* parity error is special cond, ints disabled, no DMA */ - { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, - /* Rx 8 bits/char, no auto enable, Rx off */ - { RX_CTRL_REG, RCR_CHSIZE_8 }, - /* DTR off, Tx 8 bits/char, RTS off, Tx off */ - { TX_CTRL_REG, TCR_CHSIZE_8 }, - /* special features off */ - { AUX2_CTRL_REG, 0 }, - { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG }, - { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK }, - /* Start Rx */ - { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, - /* Start Tx */ - { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, - /* Ext/Stat ints: DCD only */ - { INT_CTRL_REG, ICR_ENAB_DCD_INT }, - /* Reset Ext/Stat ints */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - /* ...again */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - }; -#endif -#if defined(CONFIG_BVME6000_SCC) - static const struct { - unsigned reg, val; - } bvme_init_tab[] = { - /* Values for BVME6000 */ - /* no parity, 1 stop bit, async, 1:16 */ - { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, - /* parity error is special cond, ints disabled, no DMA */ - { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, - /* Rx 8 bits/char, no auto enable, Rx off */ - { RX_CTRL_REG, RCR_CHSIZE_8 }, - /* DTR off, Tx 8 bits/char, RTS off, Tx off */ - { TX_CTRL_REG, TCR_CHSIZE_8 }, - /* special features off */ - { AUX2_CTRL_REG, 0 }, - { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG }, - { DPLL_CTRL_REG, DCR_BRG_ENAB }, - /* Start Rx */ - { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, - /* Start Tx */ - { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, - /* Ext/Stat ints: DCD only */ - { INT_CTRL_REG, ICR_ENAB_DCD_INT }, - /* Reset Ext/Stat ints */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - /* ...again */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - }; -#endif - if (!(port->gs.port.flags & ASYNC_INITIALIZED)) { - local_irq_save(flags); -#if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC) - if (MACH_IS_MVME147 || MACH_IS_MVME16x) { - for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i) - SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val); - } -#endif -#if defined(CONFIG_BVME6000_SCC) - if (MACH_IS_BVME6000) { - for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i) - SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val); - } -#endif - - /* remember status register for detection of DCD and CTS changes */ - scc_last_status_reg[channel] = SCCread(STATUS_REG); - - port->c_dcd = 0; /* Prevent initial 1->0 interrupt */ - scc_setsignals (port, 1,1); - local_irq_restore(flags); - } - - tty->driver_data = port; - port->gs.port.tty = tty; - port->gs.port.count++; - retval = gs_init_port(&port->gs); - if (retval) { - port->gs.port.count--; - return retval; - } - port->gs.port.flags |= GS_ACTIVE; - retval = gs_block_til_ready(port, filp); - - if (retval) { - port->gs.port.count--; - return retval; - } - - port->c_dcd = tty_port_carrier_raised(&port->gs.port); - - scc_enable_rx_interrupts(port); - - return 0; -} - - -static void scc_throttle (struct tty_struct * tty) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - if (tty->termios->c_cflag & CRTSCTS) { - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_RTS, 0); - local_irq_restore(flags); - } - if (I_IXOFF(tty)) - scc_send_xchar(tty, STOP_CHAR(tty)); -} - - -static void scc_unthrottle (struct tty_struct * tty) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - if (tty->termios->c_cflag & CRTSCTS) { - local_irq_save(flags); - SCCmod(TX_CTRL_REG, 0xff, TCR_RTS); - local_irq_restore(flags); - } - if (I_IXOFF(tty)) - scc_send_xchar(tty, START_CHAR(tty)); -} - - -static int scc_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; -} - - -static int scc_break_ctl(struct tty_struct *tty, int break_state) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK, - break_state ? TCR_SEND_BREAK : 0); - local_irq_restore(flags); - return 0; -} - - -/*--------------------------------------------------------------------------- - * Serial console stuff... - *--------------------------------------------------------------------------*/ - -#define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0) - -static void scc_ch_write (char ch) -{ - volatile char *p = NULL; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - p = (volatile char *)M147_SCC_A_ADDR; -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - p = (volatile char *)MVME_SCC_A_ADDR; -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - p = (volatile char *)BVME_SCC_A_ADDR; -#endif - - do { - scc_delay(); - } - while (!(*p & 4)); - scc_delay(); - *p = 8; - scc_delay(); - *p = ch; -} - -/* The console must be locked when we get here. */ - -static void scc_console_write (struct console *co, const char *str, unsigned count) -{ - unsigned long flags; - - local_irq_save(flags); - - while (count--) - { - if (*str == '\n') - scc_ch_write ('\r'); - scc_ch_write (*str++); - } - local_irq_restore(flags); -} - -static struct tty_driver *scc_console_device(struct console *c, int *index) -{ - *index = c->index; - return scc_driver; -} - -static struct console sercons = { - .name = "ttyS", - .write = scc_console_write, - .device = scc_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - - -static int __init vme_scc_console_init(void) -{ - if (vme_brdtype == VME_TYPE_MVME147 || - vme_brdtype == VME_TYPE_MVME162 || - vme_brdtype == VME_TYPE_MVME172 || - vme_brdtype == VME_TYPE_BVME4000 || - vme_brdtype == VME_TYPE_BVME6000) - register_console(&sercons); - return 0; -} -console_initcall(vme_scc_console_init); |
