summaryrefslogtreecommitdiffstats
path: root/drivers/char/watchdog/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/watchdog/Kconfig')
-rw-r--r--drivers/char/watchdog/Kconfig549
1 files changed, 549 insertions, 0 deletions
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
new file mode 100644
index 0000000..06a31da
--- /dev/null
+++ b/drivers/char/watchdog/Kconfig
@@ -0,0 +1,549 @@
+#
+# Watchdog device configuration
+#
+
+menu "Watchdog Cards"
+
+config WATCHDOG
+ bool "Watchdog Timer Support"
+ ---help---
+ If you say Y here (and to one of the following options) and create a
+ character special file /dev/watchdog with major number 10 and minor
+ number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
+ subsequently opening the file and then failing to write to it for
+ longer than 1 minute will result in rebooting the machine. This
+ could be useful for a networked machine that needs to come back
+ online as fast as possible after a lock-up. There's both a watchdog
+ implementation entirely in software (which can sometimes fail to
+ reboot the machine) and a driver for hardware watchdog boards, which
+ are more robust and can also keep track of the temperature inside
+ your computer. For details, read <file:Documentation/watchdog/watchdog.txt>
+ in the kernel source.
+
+ The watchdog is usually used together with the watchdog daemon
+ which is available from
+ <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
+ also monitor NFS connections and can reboot the machine when the process
+ table is full.
+
+ If unsure, say N.
+
+config WATCHDOG_NOWAYOUT
+ bool "Disable watchdog shutdown on close"
+ depends on WATCHDOG
+ help
+ The default watchdog behaviour (which you get if you say N here) is
+ to stop the timer if the process managing it closes the file
+ /dev/watchdog. It's always remotely possible that this process might
+ get killed. If you say Y here, the watchdog cannot be stopped once
+ it has been started.
+
+#
+# General Watchdog drivers
+#
+
+comment "Watchdog Device Drivers"
+ depends on WATCHDOG
+
+# Architecture Independant
+
+config SOFT_WATCHDOG
+ tristate "Software watchdog"
+ depends on WATCHDOG
+ help
+ A software monitoring watchdog. This will fail to reboot your system
+ from some situations that the hardware watchdog will recover
+ from. Equally it's a lot cheaper to install.
+
+ To compile this driver as a module, choose M here: the
+ module will be called softdog.
+
+# ARM Architecture
+
+config 21285_WATCHDOG
+ tristate "DC21285 watchdog"
+ depends on WATCHDOG && FOOTBRIDGE
+ help
+ The Intel Footbridge chip contains a builtin watchdog circuit. Say Y
+ here if you wish to use this. Alternatively say M to compile the
+ driver as a module, which will be called wdt285.
+
+ This driver does not work on all machines. In particular, early CATS
+ boards have hardware problems that will cause the machine to simply
+ lock up if the watchdog fires.
+
+ "If in doubt, leave it out" - say N.
+
+config 977_WATCHDOG
+ tristate "NetWinder WB83C977 watchdog"
+ depends on WATCHDOG && FOOTBRIDGE && ARCH_NETWINDER
+ help
+ Say Y here to include support for the WB977 watchdog included in
+ NetWinder machines. Alternatively say M to compile the driver as
+ a module, which will be called wdt977.
+
+ Not sure? It's safe to say N.
+
+config IXP4XX_WATCHDOG
+ tristate "IXP4xx Watchdog"
+ depends on WATCHDOG && ARCH_IXP4XX
+ help
+ Say Y here if to include support for the watchdog timer
+ in the Intel IXP4xx network processors. This driver can
+ be built as a module by choosing M. The module will
+ be called ixp4xx_wdt.
+
+ Note: The internal IXP4xx watchdog does a soft CPU reset
+ which doesn't reset any peripherals. There are circumstances
+ where the watchdog will fail to reset the board correctly
+ (e.g., if the boot ROM is in an unreadable state).
+
+ Say N if you are unsure.
+
+config IXP2000_WATCHDOG
+ tristate "IXP2000 Watchdog"
+ depends on WATCHDOG && ARCH_IXP2000
+ help
+ Say Y here if to include support for the watchdog timer
+ in the Intel IXP2000(2400, 2800, 2850) network processors.
+ This driver can be built as a module by choosing M. The module
+ will be called ixp2000_wdt.
+
+ Say N if you are unsure.
+
+config S3C2410_WATCHDOG
+ tristate "S3C2410 Watchdog"
+ depends on WATCHDOG && ARCH_S3C2410
+ help
+ Watchdog timer block in the Samsung S3C2410 chips. This will
+ reboot the system when the timer expires with the watchdog
+ enabled.
+
+ The driver is limited by the speed of the system's PCLK
+ signal, so with reasonbaly fast systems (PCLK around 50-66MHz)
+ then watchdog intervals of over approximately 20seconds are
+ unavailable.
+
+ The driver can be built as a module by choosing M, and will
+ be called s3c2410_wdt
+
+config SA1100_WATCHDOG
+ tristate "SA1100/PXA2xx watchdog"
+ depends on WATCHDOG && ( ARCH_SA1100 || ARCH_PXA )
+ help
+ Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
+ reboot your system when timeout is reached.
+
+ NOTE: once enabled, this timer cannot be disabled.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sa1100_wdt.
+
+# X86 (i386 + ia64 + x86_64) Architecture
+
+config ACQUIRE_WDT
+ tristate "Acquire SBC Watchdog Timer"
+ depends on WATCHDOG && X86
+ ---help---
+ This is the driver for the hardware watchdog on Single Board
+ Computers produced by Acquire Inc (and others). This watchdog
+ simply watches your kernel to make sure it doesn't freeze, and if
+ it does, it reboots your computer after a certain amount of time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acquirewdt.
+
+ Most people will say N.
+
+config ADVANTECH_WDT
+ tristate "Advantech SBC Watchdog Timer"
+ depends on WATCHDOG && X86
+ help
+ If you are configuring a Linux kernel for the Advantech single-board
+ computer, say `Y' here to support its built-in watchdog timer
+ feature. More information can be found at
+ <http://www.advantech.com.tw/products/>
+
+config ALIM1535_WDT
+ tristate "ALi M1535 PMU Watchdog Timer"
+ depends on WATCHDOG && X86 && PCI
+ ---help---
+ This is the driver for the hardware watchdog on the ALi M1535 PMU.
+
+ To compile this driver as a module, choose M here: the
+ module will be called alim1535_wdt.
+
+ Most people will say N.
+
+config ALIM7101_WDT
+ tristate "ALi M7101 PMU Computer Watchdog"
+ depends on WATCHDOG && X86 && PCI
+ help
+ This is the driver for the hardware watchdog on the ALi M7101 PMU
+ as used in the x86 Cobalt servers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called alim7101_wdt.
+
+ Most people will say N.
+
+config SC520_WDT
+ tristate "AMD Elan SC520 processor Watchdog"
+ depends on WATCHDOG && X86
+ help
+ This is the driver for the hardware watchdog built in to the
+ AMD "Elan" SC520 microcomputer commonly used in embedded systems.
+ This watchdog simply watches your kernel to make sure it doesn't
+ freeze, and if it does, it reboots your computer after a certain
+ amount of time.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called sc520_wdt.
+
+config EUROTECH_WDT
+ tristate "Eurotech CPU-1220/1410 Watchdog Timer"
+ depends on WATCHDOG && X86
+ help
+ Enable support for the watchdog timer on the Eurotech CPU-1220 and
+ CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product
+ information are at <http://www.eurotech.it/>.
+
+config IB700_WDT
+ tristate "IB700 SBC Watchdog Timer"
+ depends on WATCHDOG && X86
+ ---help---
+ This is the driver for the hardware watchdog on the IB700 Single
+ Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
+ simply watches your kernel to make sure it doesn't freeze, and if
+ it does, it reboots your computer after a certain amount of time.
+
+ This driver is like the WDT501 driver but for slightly different hardware.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ib700wdt.
+
+ Most people will say N.
+
+config WAFER_WDT
+ tristate "ICP Wafer 5823 Single Board Computer Watchdog"
+ depends on WATCHDOG && X86
+ help
+ This is a driver for the hardware watchdog on the ICP Wafer 5823
+ Single Board Computer (and probably other similar models).
+
+ To compile this driver as a module, choose M here: the
+ module will be called wafer5823wdt.
+
+config I8XX_TCO
+ tristate "Intel i8xx TCO Timer/Watchdog"
+ depends on WATCHDOG && (X86 || IA64) && PCI
+ ---help---
+ Hardware driver for the TCO timer built into the Intel 82801
+ I/O Controller Hub family. The TCO (Total Cost of Ownership)
+ timer is a watchdog timer that will reboot the machine after
+ its second expiration. The expiration time can be configured
+ with the "heartbeat" parameter.
+
+ On some motherboards the driver may fail to reset the chipset's
+ NO_REBOOT flag which prevents the watchdog from rebooting the
+ machine. If this is the case you will get a kernel message like
+ "failed to reset NO_REBOOT flag, reboot disabled by hardware".
+
+ To compile this driver as a module, choose M here: the
+ module will be called i8xx_tco.
+
+config SC1200_WDT
+ tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
+ depends on WATCHDOG && X86
+ help
+ This is a driver for National Semiconductor PC87307/PC97307 hardware
+ watchdog cards as found on the SC1200. This watchdog is mainly used
+ for power management purposes and can be used to power down the device
+ during inactivity periods (includes interrupt activity monitoring).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sc1200wdt.
+
+ Most people will say N.
+
+config SCx200_WDT
+ tristate "National Semiconductor SCx200 Watchdog"
+ depends on WATCHDOG && SCx200 && PCI
+ help
+ Enable the built-in watchdog timer support on the National
+ Semiconductor SCx200 processors.
+
+ If compiled as a module, it will be called scx200_wdt.
+
+config 60XX_WDT
+ tristate "SBC-60XX Watchdog Timer"
+ depends on WATCHDOG && X86
+ help
+ This driver can be used with the watchdog timer found on some
+ single board computers, namely the 6010 PII based computer.
+ It may well work with other cards. It reads port 0x443 to enable
+ and re-set the watchdog timer, and reads port 0x45 to disable
+ the watchdog. If you have a card that behave in similar ways,
+ you can probably make this driver work with your card as well.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called sbc60xxwdt.
+
+config CPU5_WDT
+ tristate "SMA CPU5 Watchdog"
+ depends on WATCHDOG && X86
+ ---help---
+ TBD.
+ To compile this driver as a module, choose M here: the
+ module will be called cpu5wdt.
+
+config W83627HF_WDT
+ tristate "W83627HF Watchdog Timer"
+ depends on WATCHDOG && X86
+ ---help---
+ This is the driver for the hardware watchdog on the W83627HF chipset
+ as used in Advantech PC-9578 and Tyan S2721-533 motherboards
+ (and likely others). This watchdog simply watches your kernel to
+ make sure it doesn't freeze, and if it does, it reboots your computer
+ after a certain amount of time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w83627hf_wdt.
+
+ Most people will say N.
+
+config W83877F_WDT
+ tristate "W83877F (EMACS) Watchdog Timer"
+ depends on WATCHDOG && X86
+ ---help---
+ This is the driver for the hardware watchdog on the W83877F chipset
+ as used in EMACS PC-104 motherboards (and likely others). This
+ watchdog simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w83877f_wdt.
+
+ Most people will say N.
+
+config MACHZ_WDT
+ tristate "ZF MachZ Watchdog"
+ depends on WATCHDOG && X86
+ ---help---
+ If you are using a ZF Micro MachZ processor, say Y here, otherwise
+ N. This is the driver for the watchdog timer builtin on that
+ processor using ZF-Logic interface. This watchdog simply watches
+ your kernel to make sure it doesn't freeze, and if it does, it
+ reboots your computer after a certain amount of time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called machzwd.
+
+# PowerPC Architecture
+
+config 8xx_WDT
+ tristate "MPC8xx Watchdog Timer"
+ depends on WATCHDOG && 8xx
+
+# MIPS Architecture
+
+config INDYDOG
+ tristate "Indy/I2 Hardware Watchdog"
+ depends on WATCHDOG && SGI_IP22
+ help
+ Hardwaredriver for the Indy's/I2's watchdog. This is a
+ watchdog timer that will reboot the machine after a 60 second
+ timer expired and no process has written to /dev/watchdog during
+ that time.
+
+# S390 Architecture
+
+config ZVM_WATCHDOG
+ tristate "z/VM Watchdog Timer"
+ depends on WATCHDOG && ARCH_S390
+ help
+ IBM s/390 and zSeries machines running under z/VM 5.1 or later
+ provide a virtual watchdog timer to their guest that cause a
+ user define Control Program command to be executed after a
+ timeout.
+
+ To compile this driver as a module, choose M here. The module
+ will be called vmwatchdog.
+
+# SUPERH Architecture
+
+config SH_WDT
+ tristate "SuperH Watchdog"
+ depends on WATCHDOG && SUPERH
+ help
+ This driver adds watchdog support for the integrated watchdog in the
+ SuperH processors. If you have one of these processors and wish
+ to have watchdog support enabled, say Y, otherwise say N.
+
+ As a side note, saying Y here will automatically boost HZ to 1000
+ so that the timer has a chance to clear the overflow counter. On
+ slower systems (such as the SH-2 and SH-3) this will likely yield
+ some performance issues. As such, the WDT should be avoided here
+ unless it is absolutely necessary.
+
+ To compile this driver as a module, choose M here: the
+ module will be called shwdt.
+
+# SPARC64 Architecture
+
+config WATCHDOG_CP1XXX
+ tristate "CP1XXX Hardware Watchdog support"
+ depends on WATCHDOG && SPARC64 && PCI
+ ---help---
+ This is the driver for the hardware watchdog timers present on
+ Sun Microsystems CompactPCI models CP1400 and CP1500.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpwatchdog.
+
+ If you do not have a CompactPCI model CP1400 or CP1500, or
+ another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
+ you should say N to this option.
+
+config WATCHDOG_RIO
+ tristate "RIO Hardware Watchdog support"
+ depends on WATCHDOG && SPARC64 && PCI
+ help
+ Say Y here to support the hardware watchdog capability on Sun RIO
+ machines. The watchdog timeout period is normally one minute but
+ can be changed with a boot-time parameter.
+
+#
+# ISA-based Watchdog Cards
+#
+
+comment "ISA-based Watchdog Cards"
+ depends on WATCHDOG && ISA
+
+config PCWATCHDOG
+ tristate "Berkshire Products ISA-PC Watchdog"
+ depends on WATCHDOG && ISA
+ ---help---
+ This is the driver for the Berkshire Products ISA-PC Watchdog card.
+ This card simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time. This driver is like the WDT501 driver but for different
+ hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
+ watchdog cards can be ordered from <http://www.berkprod.com/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcwd.
+
+ Most people will say N.
+
+config MIXCOMWD
+ tristate "Mixcom Watchdog"
+ depends on WATCHDOG && ISA
+ ---help---
+ This is a driver for the Mixcom hardware watchdog cards. This
+ watchdog simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mixcomwd.
+
+ Most people will say N.
+
+config WDT
+ tristate "WDT Watchdog timer"
+ depends on WATCHDOG && ISA
+ ---help---
+ If you have a WDT500P or WDT501P watchdog board, say Y here,
+ otherwise N. It is not possible to probe for this board, which means
+ that you have to inform the kernel about the IO port and IRQ that
+ is needed (you can do this via the io and irq parameters)
+
+ To compile this driver as a module, choose M here: the
+ module will be called wdt.
+
+config WDT_501
+ bool "WDT501 features"
+ depends on WDT
+ help
+ Saying Y here and creating a character special file /dev/temperature
+ with major number 10 and minor number 131 ("man mknod") will give
+ you a thermometer inside your computer: reading from
+ /dev/temperature yields one byte, the temperature in degrees
+ Fahrenheit. This works only if you have a WDT501P watchdog board
+ installed.
+
+ If you want to enable the Fan Tachometer on the WDT501P, then you
+ can do this via the tachometer parameter. Only do this if you have a
+ fan tachometer actually set up.
+
+#
+# PCI-based Watchdog Cards
+#
+
+comment "PCI-based Watchdog Cards"
+ depends on WATCHDOG && PCI
+
+config PCIPCWATCHDOG
+ tristate "Berkshire Products PCI-PC Watchdog"
+ depends on WATCHDOG && PCI
+ ---help---
+ This is the driver for the Berkshire Products PCI-PC Watchdog card.
+ This card simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time. The card can also monitor the internal temperature of the PC.
+ More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcwd_pci.
+
+ Most people will say N.
+
+config WDTPCI
+ tristate "PCI-WDT500/501 Watchdog timer"
+ depends on WATCHDOG && PCI
+ ---help---
+ If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wdt_pci.
+
+config WDT_501_PCI
+ bool "PCI-WDT501 features"
+ depends on WDTPCI
+ help
+ Saying Y here and creating a character special file /dev/temperature
+ with major number 10 and minor number 131 ("man mknod") will give
+ you a thermometer inside your computer: reading from
+ /dev/temperature yields one byte, the temperature in degrees
+ Fahrenheit. This works only if you have a PCI-WDT501 watchdog board
+ installed.
+
+ If you want to enable the Fan Tachometer on the PCI-WDT501, then you
+ can do this via the tachometer parameter. Only do this if you have a
+ fan tachometer actually set up.
+
+#
+# USB-based Watchdog Cards
+#
+
+comment "USB-based Watchdog Cards"
+ depends on WATCHDOG && USB
+
+config USBPCWATCHDOG
+ tristate "Berkshire Products USB-PC Watchdog"
+ depends on WATCHDOG && USB
+ ---help---
+ This is the driver for the Berkshire Products USB-PC Watchdog card.
+ This card simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time. The card can also monitor the internal temperature of the PC.
+ More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcwd_usb.
+
+ Most people will say N.
+
+endmenu
OpenPOWER on IntegriCloud