1 files changed, 373 insertions, 0 deletions
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
new file mode 100644
index 0000000..9cce833a
--- /dev/null
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -0,0 +1,373 @@
+/*
+ * Copyright (C) 2004 IBM Corporation
+ *
+ * Authors:
+ * Leendert van Doorn <leendert@watson.ibm.com>
+ * Dave Safford <safford@watson.ibm.com>
+ * Reiner Sailer <sailer@watson.ibm.com>
+ * Kylene Hall <kjhall@us.ibm.com>
+ *
+ * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ *
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org	 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ * 
+ */
+
+#include "tpm.h"
+
+/* National definitions */
+#define	TPM_NSC_BASE			0x360
+#define	TPM_NSC_IRQ			0x07
+
+#define	NSC_LDN_INDEX			0x07
+#define	NSC_SID_INDEX			0x20
+#define	NSC_LDC_INDEX			0x30
+#define	NSC_DIO_INDEX			0x60
+#define	NSC_CIO_INDEX			0x62
+#define	NSC_IRQ_INDEX			0x70
+#define	NSC_ITS_INDEX			0x71
+
+#define	NSC_STATUS			0x01
+#define	NSC_COMMAND			0x01
+#define	NSC_DATA			0x00
+
+/* status bits */
+#define	NSC_STATUS_OBF			0x01	/* output buffer full */
+#define	NSC_STATUS_IBF			0x02	/* input buffer full */
+#define	NSC_STATUS_F0			0x04	/* F0 */
+#define	NSC_STATUS_A2			0x08	/* A2 */
+#define	NSC_STATUS_RDY			0x10	/* ready to receive command */
+#define	NSC_STATUS_IBR			0x20	/* ready to receive data */
+
+/* command bits */
+#define	NSC_COMMAND_NORMAL		0x01	/* normal mode */
+#define	NSC_COMMAND_EOC			0x03
+#define	NSC_COMMAND_CANCEL		0x22
+
+/*
+ * Wait for a certain status to appear
+ */
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
+{
+	int expired = 0;
+	struct timer_list status_timer =
+	    TIMER_INITIALIZER(tpm_time_expired, jiffies + 10 * HZ,
+			      (unsigned long) &expired);
+
+	/* status immediately available check */
+	*data = inb(chip->vendor->base + NSC_STATUS);
+	if ((*data & mask) == val)
+		return 0;
+
+	/* wait for status */
+	add_timer(&status_timer);
+	do {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(TPM_TIMEOUT);
+		*data = inb(chip->vendor->base + 1);
+		if ((*data & mask) == val) {
+			del_singleshot_timer_sync(&status_timer);
+			return 0;
+		}
+	}
+	while (!expired);
+
+	return -EBUSY;
+}
+
+static int nsc_wait_for_ready(struct tpm_chip *chip)
+{
+	int status;
+	int expired = 0;
+	struct timer_list status_timer =
+	    TIMER_INITIALIZER(tpm_time_expired, jiffies + 100,
+			      (unsigned long) &expired);
+
+	/* status immediately available check */
+	status = inb(chip->vendor->base + NSC_STATUS);
+	if (status & NSC_STATUS_OBF)
+		status = inb(chip->vendor->base + NSC_DATA);
+	if (status & NSC_STATUS_RDY)
+		return 0;
+
+	/* wait for status */
+	add_timer(&status_timer);
+	do {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(TPM_TIMEOUT);
+		status = inb(chip->vendor->base + NSC_STATUS);
+		if (status & NSC_STATUS_OBF)
+			status = inb(chip->vendor->base + NSC_DATA);
+		if (status & NSC_STATUS_RDY) {
+			del_singleshot_timer_sync(&status_timer);
+			return 0;
+		}
+	}
+	while (!expired);
+
+	dev_info(&chip->pci_dev->dev, "wait for ready failed\n");
+	return -EBUSY;
+}
+
+
+static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
+{
+	u8 *buffer = buf;
+	u8 data, *p;
+	u32 size;
+	__be32 *native_size;
+
+	if (count < 6)
+		return -EIO;
+
+	if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) {
+		dev_err(&chip->pci_dev->dev, "F0 timeout\n");
+		return -EIO;
+	}
+	if ((data =
+	     inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
+		dev_err(&chip->pci_dev->dev, "not in normal mode (0x%x)\n",
+			data);
+		return -EIO;
+	}
+
+	/* read the whole packet */
+	for (p = buffer; p < &buffer[count]; p++) {
+		if (wait_for_stat
+		    (chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) {
+			dev_err(&chip->pci_dev->dev,
+				"OBF timeout (while reading data)\n");
+			return -EIO;
+		}
+		if (data & NSC_STATUS_F0)
+			break;
+		*p = inb(chip->vendor->base + NSC_DATA);
+	}
+
+	if ((data & NSC_STATUS_F0) == 0) {
+		dev_err(&chip->pci_dev->dev, "F0 not set\n");
+		return -EIO;
+	}
+	if ((data = inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_EOC) {
+		dev_err(&chip->pci_dev->dev,
+			"expected end of command(0x%x)\n", data);
+		return -EIO;
+	}
+
+	native_size = (__force __be32 *) (buf + 2);
+	size = be32_to_cpu(*native_size);
+
+	if (count < size)
+		return -EIO;
+
+	return size;
+}
+
+static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
+{
+	u8 data;
+	int i;
+
+	/*
+	 * If we hit the chip with back to back commands it locks up
+	 * and never set IBF. Hitting it with this "hammer" seems to
+	 * fix it. Not sure why this is needed, we followed the flow
+	 * chart in the manual to the letter.
+	 */
+	outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+
+	if (nsc_wait_for_ready(chip) != 0)
+		return -EIO;
+
+	if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
+		dev_err(&chip->pci_dev->dev, "IBF timeout\n");
+		return -EIO;
+	}
+
+	outb(NSC_COMMAND_NORMAL, chip->vendor->base + NSC_COMMAND);
+	if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
+		dev_err(&chip->pci_dev->dev, "IBR timeout\n");
+		return -EIO;
+	}
+
+	for (i = 0; i < count; i++) {
+		if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
+			dev_err(&chip->pci_dev->dev,
+				"IBF timeout (while writing data)\n");
+			return -EIO;
+		}
+		outb(buf[i], chip->vendor->base + NSC_DATA);
+	}
+
+	if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
+		dev_err(&chip->pci_dev->dev, "IBF timeout\n");
+		return -EIO;
+	}
+	outb(NSC_COMMAND_EOC, chip->vendor->base + NSC_COMMAND);
+
+	return count;
+}
+
+static void tpm_nsc_cancel(struct tpm_chip *chip)
+{
+	outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+}
+
+static struct file_operations nsc_ops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.open = tpm_open,
+	.read = tpm_read,
+	.write = tpm_write,
+	.release = tpm_release,
+};
+
+static struct tpm_vendor_specific tpm_nsc = {
+	.recv = tpm_nsc_recv,
+	.send = tpm_nsc_send,
+	.cancel = tpm_nsc_cancel,
+	.req_complete_mask = NSC_STATUS_OBF,
+	.req_complete_val = NSC_STATUS_OBF,
+	.base = TPM_NSC_BASE,
+	.miscdev = { .fops = &nsc_ops, },
+	
+};
+
+static int __devinit tpm_nsc_init(struct pci_dev *pci_dev,
+				  const struct pci_device_id *pci_id)
+{
+	int rc = 0;
+
+	if (pci_enable_device(pci_dev))
+		return -EIO;
+
+	if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
+		rc = -ENODEV;
+		goto out_err;
+	}
+
+	/* verify that it is a National part (SID) */
+	if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
+		rc = -ENODEV;
+		goto out_err;
+	}
+
+	dev_dbg(&pci_dev->dev, "NSC TPM detected\n");
+	dev_dbg(&pci_dev->dev,
+		"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
+		tpm_read_index(0x07), tpm_read_index(0x20),
+		tpm_read_index(0x27));
+	dev_dbg(&pci_dev->dev,
+		"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
+		tpm_read_index(0x21), tpm_read_index(0x25),
+		tpm_read_index(0x26), tpm_read_index(0x28));
+	dev_dbg(&pci_dev->dev, "NSC IO Base0 0x%x\n",
+		(tpm_read_index(0x60) << 8) | tpm_read_index(0x61));
+	dev_dbg(&pci_dev->dev, "NSC IO Base1 0x%x\n",
+		(tpm_read_index(0x62) << 8) | tpm_read_index(0x63));
+	dev_dbg(&pci_dev->dev, "NSC Interrupt number and wakeup 0x%x\n",
+		tpm_read_index(0x70));
+	dev_dbg(&pci_dev->dev, "NSC IRQ type select 0x%x\n",
+		tpm_read_index(0x71));
+	dev_dbg(&pci_dev->dev,
+		"NSC DMA channel select0 0x%x, select1 0x%x\n",
+		tpm_read_index(0x74), tpm_read_index(0x75));
+	dev_dbg(&pci_dev->dev,
+		"NSC Config "
+		"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+		tpm_read_index(0xF0), tpm_read_index(0xF1),
+		tpm_read_index(0xF2), tpm_read_index(0xF3),
+		tpm_read_index(0xF4), tpm_read_index(0xF5),
+		tpm_read_index(0xF6), tpm_read_index(0xF7),
+		tpm_read_index(0xF8), tpm_read_index(0xF9));
+
+	dev_info(&pci_dev->dev,
+		 "NSC PC21100 TPM revision %d\n",
+		 tpm_read_index(0x27) & 0x1F);
+
+	if (tpm_read_index(NSC_LDC_INDEX) == 0)
+		dev_info(&pci_dev->dev, ": NSC TPM not active\n");
+
+	/* select PM channel 1 */
+	tpm_write_index(NSC_LDN_INDEX, 0x12);
+	tpm_read_index(NSC_LDN_INDEX);
+
+	/* disable the DPM module */
+	tpm_write_index(NSC_LDC_INDEX, 0);
+	tpm_read_index(NSC_LDC_INDEX);
+
+	/* set the data register base addresses */
+	tpm_write_index(NSC_DIO_INDEX, TPM_NSC_BASE >> 8);
+	tpm_write_index(NSC_DIO_INDEX + 1, TPM_NSC_BASE);
+	tpm_read_index(NSC_DIO_INDEX);
+	tpm_read_index(NSC_DIO_INDEX + 1);
+
+	/* set the command register base addresses */
+	tpm_write_index(NSC_CIO_INDEX, (TPM_NSC_BASE + 1) >> 8);
+	tpm_write_index(NSC_CIO_INDEX + 1, (TPM_NSC_BASE + 1));
+	tpm_read_index(NSC_DIO_INDEX);
+	tpm_read_index(NSC_DIO_INDEX + 1);
+
+	/* set the interrupt number to be used for the host interface */
+	tpm_write_index(NSC_IRQ_INDEX, TPM_NSC_IRQ);
+	tpm_write_index(NSC_ITS_INDEX, 0x00);
+	tpm_read_index(NSC_IRQ_INDEX);
+
+	/* enable the DPM module */
+	tpm_write_index(NSC_LDC_INDEX, 0x01);
+	tpm_read_index(NSC_LDC_INDEX);
+
+	if ((rc = tpm_register_hardware(pci_dev, &tpm_nsc)) < 0)
+		goto out_err;
+
+	return 0;
+
+out_err:
+	pci_disable_device(pci_dev);
+	return rc;
+}
+
+static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
+	{PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
+
+static struct pci_driver nsc_pci_driver = {
+	.name = "tpm_nsc",
+	.id_table = tpm_pci_tbl,
+	.probe = tpm_nsc_init,
+	.remove = __devexit_p(tpm_remove),
+	.suspend = tpm_pm_suspend,
+	.resume = tpm_pm_resume,
+};
+
+static int __init init_nsc(void)
+{
+	return pci_register_driver(&nsc_pci_driver);
+}
+
+static void __exit cleanup_nsc(void)
+{
+	pci_unregister_driver(&nsc_pci_driver);
+}
+
+module_init(init_nsc);
+module_exit(cleanup_nsc);
+
+MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
+MODULE_DESCRIPTION("TPM Driver");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");