diff options
Diffstat (limited to 'drivers/char/synclink_gt.c')
| -rw-r--r-- | drivers/char/synclink_gt.c | 5161 |
1 files changed, 0 insertions, 5161 deletions
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c deleted file mode 100644 index a35dd54..0000000 --- a/drivers/char/synclink_gt.c +++ /dev/null @@ -1,5161 +0,0 @@ -/* - * Device driver for Microgate SyncLink GT serial adapters. - * - * written by Paul Fulghum for Microgate Corporation - * paulkf@microgate.com - * - * Microgate and SyncLink are trademarks of Microgate Corporation - * - * This code is released under the GNU General Public License (GPL) - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * DEBUG OUTPUT DEFINITIONS - * - * uncomment lines below to enable specific types of debug output - * - * DBGINFO information - most verbose output - * DBGERR serious errors - * DBGBH bottom half service routine debugging - * DBGISR interrupt service routine debugging - * DBGDATA output receive and transmit data - * DBGTBUF output transmit DMA buffers and registers - * DBGRBUF output receive DMA buffers and registers - */ - -#define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt -#define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt -#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt -#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt -#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) -/*#define DBGTBUF(info) dump_tbufs(info)*/ -/*#define DBGRBUF(info) dump_rbufs(info)*/ - - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/netdevice.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioctl.h> -#include <linux/termios.h> -#include <linux/bitops.h> -#include <linux/workqueue.h> -#include <linux/hdlc.h> -#include <linux/synclink.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/dma.h> -#include <asm/types.h> -#include <asm/uaccess.h> - -#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE)) -#define SYNCLINK_GENERIC_HDLC 1 -#else -#define SYNCLINK_GENERIC_HDLC 0 -#endif - -/* - * module identification - */ -static char *driver_name = "SyncLink GT"; -static char *tty_driver_name = "synclink_gt"; -static char *tty_dev_prefix = "ttySLG"; -MODULE_LICENSE("GPL"); -#define MGSL_MAGIC 0x5401 -#define MAX_DEVICES 32 - -static struct pci_device_id pci_table[] = { - {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, - {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, - {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, - {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, - {0,}, /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, pci_table); - -static int init_one(struct pci_dev *dev,const struct pci_device_id *ent); -static void remove_one(struct pci_dev *dev); -static struct pci_driver pci_driver = { - .name = "synclink_gt", - .id_table = pci_table, - .probe = init_one, - .remove = __devexit_p(remove_one), -}; - -static bool pci_registered; - -/* - * module configuration and status - */ -static struct slgt_info *slgt_device_list; -static int slgt_device_count; - -static int ttymajor; -static int debug_level; -static int maxframe[MAX_DEVICES]; - -module_param(ttymajor, int, 0); -module_param(debug_level, int, 0); -module_param_array(maxframe, int, NULL, 0); - -MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); -MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); -MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); - -/* - * tty support and callbacks - */ -static struct tty_driver *serial_driver; - -static int open(struct tty_struct *tty, struct file * filp); -static void close(struct tty_struct *tty, struct file * filp); -static void hangup(struct tty_struct *tty); -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); - -static int write(struct tty_struct *tty, const unsigned char *buf, int count); -static int put_char(struct tty_struct *tty, unsigned char ch); -static void send_xchar(struct tty_struct *tty, char ch); -static void wait_until_sent(struct tty_struct *tty, int timeout); -static int write_room(struct tty_struct *tty); -static void flush_chars(struct tty_struct *tty); -static void flush_buffer(struct tty_struct *tty); -static void tx_hold(struct tty_struct *tty); -static void tx_release(struct tty_struct *tty); - -static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int chars_in_buffer(struct tty_struct *tty); -static void throttle(struct tty_struct * tty); -static void unthrottle(struct tty_struct * tty); -static int set_break(struct tty_struct *tty, int break_state); - -/* - * generic HDLC support and callbacks - */ -#if SYNCLINK_GENERIC_HDLC -#define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(struct slgt_info *info); -static void hdlcdev_rx(struct slgt_info *info, char *buf, int size); -static int hdlcdev_init(struct slgt_info *info); -static void hdlcdev_exit(struct slgt_info *info); -#endif - - -/* - * device specific structures, macros and functions - */ - -#define SLGT_MAX_PORTS 4 -#define SLGT_REG_SIZE 256 - -/* - * conditional wait facility - */ -struct cond_wait { - struct cond_wait *next; - wait_queue_head_t q; - wait_queue_t wait; - unsigned int data; -}; -static void init_cond_wait(struct cond_wait *w, unsigned int data); -static void add_cond_wait(struct cond_wait **head, struct cond_wait *w); -static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w); -static void flush_cond_wait(struct cond_wait **head); - -/* - * DMA buffer descriptor and access macros - */ -struct slgt_desc -{ - __le16 count; - __le16 status; - __le32 pbuf; /* physical address of data buffer */ - __le32 next; /* physical address of next descriptor */ - - /* driver book keeping */ - char *buf; /* virtual address of data buffer */ - unsigned int pdesc; /* physical address of this descriptor */ - dma_addr_t buf_dma_addr; - unsigned short buf_count; -}; - -#define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b)) -#define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) -#define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) -#define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) -#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) -#define desc_count(a) (le16_to_cpu((a).count)) -#define desc_status(a) (le16_to_cpu((a).status)) -#define desc_complete(a) (le16_to_cpu((a).status) & BIT15) -#define desc_eof(a) (le16_to_cpu((a).status) & BIT2) -#define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1) -#define desc_abort(a) (le16_to_cpu((a).status) & BIT0) -#define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3) - -struct _input_signal_events { - int ri_up; - int ri_down; - int dsr_up; - int dsr_down; - int dcd_up; - int dcd_down; - int cts_up; - int cts_down; -}; - -/* - * device instance data structure - */ -struct slgt_info { - void *if_ptr; /* General purpose pointer (used by SPPP) */ - struct tty_port port; - - struct slgt_info *next_device; /* device list link */ - - int magic; - - char device_name[25]; - struct pci_dev *pdev; - - int port_count; /* count of ports on adapter */ - int adapter_num; /* adapter instance number */ - int port_num; /* port instance number */ - - /* array of pointers to port contexts on this adapter */ - struct slgt_info *port_array[SLGT_MAX_PORTS]; - - int line; /* tty line instance number */ - - struct mgsl_icount icount; - - int timeout; - int x_char; /* xon/xoff character */ - unsigned int read_status_mask; - unsigned int ignore_status_mask; - - wait_queue_head_t status_event_wait_q; - wait_queue_head_t event_wait_q; - struct timer_list tx_timer; - struct timer_list rx_timer; - - unsigned int gpio_present; - struct cond_wait *gpio_wait_q; - - spinlock_t lock; /* spinlock for synchronizing with ISR */ - - struct work_struct task; - u32 pending_bh; - bool bh_requested; - bool bh_running; - - int isr_overflow; - bool irq_requested; /* true if IRQ requested */ - bool irq_occurred; /* for diagnostics use */ - - /* device configuration */ - - unsigned int bus_type; - unsigned int irq_level; - unsigned long irq_flags; - - unsigned char __iomem * reg_addr; /* memory mapped registers address */ - u32 phys_reg_addr; - bool reg_addr_requested; - - MGSL_PARAMS params; /* communications parameters */ - u32 idle_mode; - u32 max_frame_size; /* as set by device config */ - - unsigned int rbuf_fill_level; - unsigned int rx_pio; - unsigned int if_mode; - unsigned int base_clock; - unsigned int xsync; - unsigned int xctrl; - - /* device status */ - - bool rx_enabled; - bool rx_restart; - - bool tx_enabled; - bool tx_active; - - unsigned char signals; /* serial signal states */ - int init_error; /* initialization error */ - - unsigned char *tx_buf; - int tx_count; - - char flag_buf[MAX_ASYNC_BUFFER_SIZE]; - char char_buf[MAX_ASYNC_BUFFER_SIZE]; - bool drop_rts_on_tx_done; - struct _input_signal_events input_signal_events; - - int dcd_chkcount; /* check counts to prevent */ - int cts_chkcount; /* too many IRQs if a signal */ - int dsr_chkcount; /* is floating */ - int ri_chkcount; - - char *bufs; /* virtual address of DMA buffer lists */ - dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */ - - unsigned int rbuf_count; - struct slgt_desc *rbufs; - unsigned int rbuf_current; - unsigned int rbuf_index; - unsigned int rbuf_fill_index; - unsigned short rbuf_fill_count; - - unsigned int tbuf_count; - struct slgt_desc *tbufs; - unsigned int tbuf_current; - unsigned int tbuf_start; - - unsigned char *tmp_rbuf; - unsigned int tmp_rbuf_count; - - /* SPPP/Cisco HDLC device parts */ - - int netcount; - spinlock_t netlock; -#if SYNCLINK_GENERIC_HDLC - struct net_device *netdev; -#endif - -}; - -static MGSL_PARAMS default_params = { - .mode = MGSL_MODE_HDLC, - .loopback = 0, - .flags = HDLC_FLAG_UNDERRUN_ABORT15, - .encoding = HDLC_ENCODING_NRZI_SPACE, - .clock_speed = 0, - .addr_filter = 0xff, - .crc_type = HDLC_CRC_16_CCITT, - .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS, - .preamble = HDLC_PREAMBLE_PATTERN_NONE, - .data_rate = 9600, - .data_bits = 8, - .stop_bits = 1, - .parity = ASYNC_PARITY_NONE -}; - - -#define BH_RECEIVE 1 -#define BH_TRANSMIT 2 -#define BH_STATUS 4 -#define IO_PIN_SHUTDOWN_LIMIT 100 - -#define DMABUFSIZE 256 -#define DESC_LIST_SIZE 4096 - -#define MASK_PARITY BIT1 -#define MASK_FRAMING BIT0 -#define MASK_BREAK BIT14 -#define MASK_OVERRUN BIT4 - -#define GSR 0x00 /* global status */ -#define JCR 0x04 /* JTAG control */ -#define IODR 0x08 /* GPIO direction */ -#define IOER 0x0c /* GPIO interrupt enable */ -#define IOVR 0x10 /* GPIO value */ -#define IOSR 0x14 /* GPIO interrupt status */ -#define TDR 0x80 /* tx data */ -#define RDR 0x80 /* rx data */ -#define TCR 0x82 /* tx control */ -#define TIR 0x84 /* tx idle */ -#define TPR 0x85 /* tx preamble */ -#define RCR 0x86 /* rx control */ -#define VCR 0x88 /* V.24 control */ -#define CCR 0x89 /* clock control */ -#define BDR 0x8a /* baud divisor */ -#define SCR 0x8c /* serial control */ -#define SSR 0x8e /* serial status */ -#define RDCSR 0x90 /* rx DMA control/status */ -#define TDCSR 0x94 /* tx DMA control/status */ -#define RDDAR 0x98 /* rx DMA descriptor address */ -#define TDDAR 0x9c /* tx DMA descriptor address */ -#define XSR 0x40 /* extended sync pattern */ -#define XCR 0x44 /* extended control */ - -#define RXIDLE BIT14 -#define RXBREAK BIT14 -#define IRQ_TXDATA BIT13 -#define IRQ_TXIDLE BIT12 -#define IRQ_TXUNDER BIT11 /* HDLC */ -#define IRQ_RXDATA BIT10 -#define IRQ_RXIDLE BIT9 /* HDLC */ -#define IRQ_RXBREAK BIT9 /* async */ -#define IRQ_RXOVER BIT8 -#define IRQ_DSR BIT7 -#define IRQ_CTS BIT6 -#define IRQ_DCD BIT5 -#define IRQ_RI BIT4 -#define IRQ_ALL 0x3ff0 -#define IRQ_MASTER BIT0 - -#define slgt_irq_on(info, mask) \ - wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask))) -#define slgt_irq_off(info, mask) \ - wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask))) - -static __u8 rd_reg8(struct slgt_info *info, unsigned int addr); -static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value); -static __u16 rd_reg16(struct slgt_info *info, unsigned int addr); -static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value); -static __u32 rd_reg32(struct slgt_info *info, unsigned int addr); -static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value); - -static void msc_set_vcr(struct slgt_info *info); - -static int startup(struct slgt_info *info); -static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info); -static void shutdown(struct slgt_info *info); -static void program_hw(struct slgt_info *info); -static void change_params(struct slgt_info *info); - -static int register_test(struct slgt_info *info); -static int irq_test(struct slgt_info *info); -static int loopback_test(struct slgt_info *info); -static int adapter_test(struct slgt_info *info); - -static void reset_adapter(struct slgt_info *info); -static void reset_port(struct slgt_info *info); -static void async_mode(struct slgt_info *info); -static void sync_mode(struct slgt_info *info); - -static void rx_stop(struct slgt_info *info); -static void rx_start(struct slgt_info *info); -static void reset_rbufs(struct slgt_info *info); -static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); -static void rdma_reset(struct slgt_info *info); -static bool rx_get_frame(struct slgt_info *info); -static bool rx_get_buf(struct slgt_info *info); - -static void tx_start(struct slgt_info *info); -static void tx_stop(struct slgt_info *info); -static void tx_set_idle(struct slgt_info *info); -static unsigned int free_tbuf_count(struct slgt_info *info); -static unsigned int tbuf_bytes(struct slgt_info *info); -static void reset_tbufs(struct slgt_info *info); -static void tdma_reset(struct slgt_info *info); -static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); - -static void get_signals(struct slgt_info *info); -static void set_signals(struct slgt_info *info); -static void enable_loopback(struct slgt_info *info); -static void set_rate(struct slgt_info *info, u32 data_rate); - -static int bh_action(struct slgt_info *info); -static void bh_handler(struct work_struct *work); -static void bh_transmit(struct slgt_info *info); -static void isr_serial(struct slgt_info *info); -static void isr_rdma(struct slgt_info *info); -static void isr_txeom(struct slgt_info *info, unsigned short status); -static void isr_tdma(struct slgt_info *info); - -static int alloc_dma_bufs(struct slgt_info *info); -static void free_dma_bufs(struct slgt_info *info); -static int alloc_desc(struct slgt_info *info); -static void free_desc(struct slgt_info *info); -static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); -static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); - -static int alloc_tmp_rbuf(struct slgt_info *info); -static void free_tmp_rbuf(struct slgt_info *info); - -static void tx_timeout(unsigned long context); -static void rx_timeout(unsigned long context); - -/* - * ioctl handlers - */ -static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount); -static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params); -static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params); -static int get_txidle(struct slgt_info *info, int __user *idle_mode); -static int set_txidle(struct slgt_info *info, int idle_mode); -static int tx_enable(struct slgt_info *info, int enable); -static int tx_abort(struct slgt_info *info); -static int rx_enable(struct slgt_info *info, int enable); -static int modem_input_wait(struct slgt_info *info,int arg); -static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int set_break(struct tty_struct *tty, int break_state); -static int get_interface(struct slgt_info *info, int __user *if_mode); -static int set_interface(struct slgt_info *info, int if_mode); -static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); -static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); -static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); -static int get_xsync(struct slgt_info *info, int __user *if_mode); -static int set_xsync(struct slgt_info *info, int if_mode); -static int get_xctrl(struct slgt_info *info, int __user *if_mode); -static int set_xctrl(struct slgt_info *info, int if_mode); - -/* - * driver functions - */ -static void add_device(struct slgt_info *info); -static void device_init(int adapter_num, struct pci_dev *pdev); -static int claim_resources(struct slgt_info *info); -static void release_resources(struct slgt_info *info); - -/* - * DEBUG OUTPUT CODE - */ -#ifndef DBGINFO -#define DBGINFO(fmt) -#endif -#ifndef DBGERR -#define DBGERR(fmt) -#endif -#ifndef DBGBH -#define DBGBH(fmt) -#endif -#ifndef DBGISR -#define DBGISR(fmt) -#endif - -#ifdef DBGDATA -static void trace_block(struct slgt_info *info, const char *data, int count, const char *label) -{ - int i; - int linecount; - printk("%s %s data:\n",info->device_name, label); - while(count) { - linecount = (count > 16) ? 16 : count; - for(i=0; i < linecount; i++) - printk("%02X ",(unsigned char)data[i]); - for(;i<17;i++) - printk(" "); - for(i=0;i<linecount;i++) { - if (data[i]>=040 && data[i]<=0176) - printk("%c",data[i]); - else - printk("."); - } - printk("\n"); - data += linecount; - count -= linecount; - } -} -#else -#define DBGDATA(info, buf, size, label) -#endif - -#ifdef DBGTBUF -static void dump_tbufs(struct slgt_info *info) -{ - int i; - printk("tbuf_current=%d\n", info->tbuf_current); - for (i=0 ; i < info->tbuf_count ; i++) { - printk("%d: count=%04X status=%04X\n", - i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status)); - } -} -#else -#define DBGTBUF(info) -#endif - -#ifdef DBGRBUF -static void dump_rbufs(struct slgt_info *info) -{ - int i; - printk("rbuf_current=%d\n", info->rbuf_current); - for (i=0 ; i < info->rbuf_count ; i++) { - printk("%d: count=%04X status=%04X\n", - i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status)); - } -} -#else -#define DBGRBUF(info) -#endif - -static inline int sanity_check(struct slgt_info *info, char *devname, const char *name) -{ -#ifdef SANITY_CHECK - if (!info) { - printk("null struct slgt_info for (%s) in %s\n", devname, name); - return 1; - } - if (info->magic != MGSL_MAGIC) { - printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); - return 1; - } -#else - if (!info) - return 1; -#endif - return 0; -} - -/** - * line discipline callback wrappers - * - * The wrappers maintain line discipline references - * while calling into the line discipline. - * - * ldisc_receive_buf - pass receive data to line discipline - */ -static void ldisc_receive_buf(struct tty_struct *tty, - const __u8 *data, char *flags, int count) -{ - struct tty_ldisc *ld; - if (!tty) - return; - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->receive_buf) - ld->ops->receive_buf(tty, data, flags, count); - tty_ldisc_deref(ld); - } -} - -/* tty callbacks */ - -static int open(struct tty_struct *tty, struct file *filp) -{ - struct slgt_info *info; - int retval, line; - unsigned long flags; - - line = tty->index; - if ((line < 0) || (line >= slgt_device_count)) { - DBGERR(("%s: open with invalid line #%d.\n", driver_name, line)); - return -ENODEV; - } - - info = slgt_device_list; - while(info && info->line != line) - info = info->next_device; - if (sanity_check(info, tty->name, "open")) - return -ENODEV; - if (info->init_error) { - DBGERR(("%s init error=%d\n", info->device_name, info->init_error)); - return -ENODEV; - } - - tty->driver_data = info; - info->port.tty = tty; - - DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count)); - - /* If port is closing, signal caller to try again */ - if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){ - if (info->port.flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->port.close_wait); - retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - goto cleanup; - } - - mutex_lock(&info->port.mutex); - info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - spin_lock_irqsave(&info->netlock, flags); - if (info->netcount) { - retval = -EBUSY; - spin_unlock_irqrestore(&info->netlock, flags); - mutex_unlock(&info->port.mutex); - goto cleanup; - } - info->port.count++; - spin_unlock_irqrestore(&info->netlock, flags); - - if (info->port.count == 1) { - /* 1st open on this device, init hardware */ - retval = startup(info); - if (retval < 0) { - mutex_unlock(&info->port.mutex); - goto cleanup; - } - } - mutex_unlock(&info->port.mutex); - retval = block_til_ready(tty, filp, info); - if (retval) { - DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); - goto cleanup; - } - - retval = 0; - -cleanup: - if (retval) { - if (tty->count == 1) - info->port.tty = NULL; /* tty layer will release tty struct */ - if(info->port.count) - info->port.count--; - } - - DBGINFO(("%s open rc=%d\n", info->device_name, retval)); - return retval; -} - -static void close(struct tty_struct *tty, struct file *filp) -{ - struct slgt_info *info = tty->driver_data; - - if (sanity_check(info, tty->name, "close")) - return; - DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); - - if (tty_port_close_start(&info->port, tty, filp) == 0) - goto cleanup; - - mutex_lock(&info->port.mutex); - if (info->port.flags & ASYNC_INITIALIZED) - wait_until_sent(tty, info->timeout); - flush_buffer(tty); - tty_ldisc_flush(tty); - - shutdown(info); - mutex_unlock(&info->port.mutex); - - tty_port_close_end(&info->port, tty); - info->port.tty = NULL; -cleanup: - DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); -} - -static void hangup(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "hangup")) - return; - DBGINFO(("%s hangup\n", info->device_name)); - - flush_buffer(tty); - - mutex_lock(&info->port.mutex); - shutdown(info); - - spin_lock_irqsave(&info->port.lock, flags); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - spin_unlock_irqrestore(&info->port.lock, flags); - mutex_unlock(&info->port.mutex); - - wake_up_interruptible(&info->port.open_wait); -} - -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - DBGINFO(("%s set_termios\n", tty->driver->name)); - - change_params(info); - - /* Handle transition to B0 status */ - if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { - info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { - info->signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) { - info->signals |= SerialSignal_RTS; - } - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle turning off CRTSCTS */ - if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - tx_release(tty); - } -} - -static void update_tx_timer(struct slgt_info *info) -{ - /* - * use worst case speed of 1200bps to calculate transmit timeout - * based on data in buffers (tbuf_bytes) and FIFO (128 bytes) - */ - if (info->params.mode == MGSL_MODE_HDLC) { - int timeout = (tbuf_bytes(info) * 7) + 1000; - mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout)); - } -} - -static int write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int ret = 0; - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "write")) - return -EIO; - - DBGINFO(("%s write count=%d\n", info->device_name, count)); - - if (!info->tx_buf || (count > info->max_frame_size)) - return -EIO; - - if (!count || tty->stopped || tty->hw_stopped) - return 0; - - spin_lock_irqsave(&info->lock, flags); - - if (info->tx_count) { - /* send accumulated data from send_char() */ - if (!tx_load(info, info->tx_buf, info->tx_count)) - goto cleanup; - info->tx_count = 0; - } - - if (tx_load(info, buf, count)) - ret = count; - -cleanup: - spin_unlock_irqrestore(&info->lock, flags); - DBGINFO(("%s write rc=%d\n", info->device_name, ret)); - return ret; -} - -static int put_char(struct tty_struct *tty, unsigned char ch) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if (sanity_check(info, tty->name, "put_char")) - return 0; - DBGINFO(("%s put_char(%d)\n", info->device_name, ch)); - if (!info->tx_buf) - return 0; - spin_lock_irqsave(&info->lock,flags); - if (info->tx_count < info->max_frame_size) { - info->tx_buf[info->tx_count++] = ch; - ret = 1; - } - spin_unlock_irqrestore(&info->lock,flags); - return ret; -} - -static void send_xchar(struct tty_struct *tty, char ch) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "send_xchar")) - return; - DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch)); - info->x_char = ch; - if (ch) { - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_enabled) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -static void wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct slgt_info *info = tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (!info ) - return; - if (sanity_check(info, tty->name, "wait_until_sent")) - return; - DBGINFO(("%s wait_until_sent entry\n", info->device_name)); - if (!(info->port.flags & ASYNC_INITIALIZED)) - goto exit; - - orig_jiffies = jiffies; - - /* Set check interval to 1/5 of estimated time to - * send a character, and make it at least 1. The check - * interval should also be less than the timeout. - * Note: use tight timings here to satisfy the NIST-PCTS. - */ - - if (info->params.data_rate) { - char_time = info->timeout/(32 * 5); - if (!char_time) - char_time++; - } else - char_time = 1; - - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - - while (info->tx_active) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } -exit: - DBGINFO(("%s wait_until_sent exit\n", info->device_name)); -} - -static int write_room(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - int ret; - - if (sanity_check(info, tty->name, "write_room")) - return 0; - ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; - DBGINFO(("%s write_room=%d\n", info->device_name, ret)); - return ret; -} - -static void flush_chars(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "flush_chars")) - return; - DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count)); - - if (info->tx_count <= 0 || tty->stopped || - tty->hw_stopped || !info->tx_buf) - return; - - DBGINFO(("%s flush_chars start transmit\n", info->device_name)); - - spin_lock_irqsave(&info->lock,flags); - if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) - info->tx_count = 0; - spin_unlock_irqrestore(&info->lock,flags); -} - -static void flush_buffer(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "flush_buffer")) - return; - DBGINFO(("%s flush_buffer\n", info->device_name)); - - spin_lock_irqsave(&info->lock, flags); - info->tx_count = 0; - spin_unlock_irqrestore(&info->lock, flags); - - tty_wakeup(tty); -} - -/* - * throttle (stop) transmitter - */ -static void tx_hold(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_hold")) - return; - DBGINFO(("%s tx_hold\n", info->device_name)); - spin_lock_irqsave(&info->lock,flags); - if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC) - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* - * release (start) transmitter - */ -static void tx_release(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_release")) - return; - DBGINFO(("%s tx_release\n", info->device_name)); - spin_lock_irqsave(&info->lock, flags); - if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) - info->tx_count = 0; - spin_unlock_irqrestore(&info->lock, flags); -} - -/* - * Service an IOCTL request - * - * Arguments - * - * tty pointer to tty instance data - * cmd IOCTL command code - * arg command argument/context - * - * Return 0 if success, otherwise error code - */ -static int ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct slgt_info *info = tty->driver_data; - void __user *argp = (void __user *)arg; - int ret; - - if (sanity_check(info, tty->name, "ioctl")) - return -ENODEV; - DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case MGSL_IOCWAITEVENT: - return wait_mgsl_event(info, argp); - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - case MGSL_IOCSGPIO: - return set_gpio(info, argp); - case MGSL_IOCGGPIO: - return get_gpio(info, argp); - case MGSL_IOCWAITGPIO: - return wait_gpio(info, argp); - case MGSL_IOCGXSYNC: - return get_xsync(info, argp); - case MGSL_IOCSXSYNC: - return set_xsync(info, (int)arg); - case MGSL_IOCGXCTRL: - return get_xctrl(info, argp); - case MGSL_IOCSXCTRL: - return set_xctrl(info, (int)arg); - } - mutex_lock(&info->port.mutex); - switch (cmd) { - case MGSL_IOCGPARAMS: - ret = get_params(info, argp); - break; - case MGSL_IOCSPARAMS: - ret = set_params(info, argp); - break; - case MGSL_IOCGTXIDLE: - ret = get_txidle(info, argp); - break; - case MGSL_IOCSTXIDLE: - ret = set_txidle(info, (int)arg); - break; - case MGSL_IOCTXENABLE: - ret = tx_enable(info, (int)arg); - break; - case MGSL_IOCRXENABLE: - ret = rx_enable(info, (int)arg); - break; - case MGSL_IOCTXABORT: - ret = tx_abort(info); - break; - case MGSL_IOCGSTATS: - ret = get_stats(info, argp); - break; - case MGSL_IOCGIF: - ret = get_interface(info, argp); - break; - case MGSL_IOCSIF: - ret = set_interface(info,(int)arg); - break; - default: - ret = -ENOIOCTLCMD; - } - mutex_unlock(&info->port.mutex); - return ret; -} - -static int get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) - -{ - struct slgt_info *info = tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -/* - * support for 32 bit ioctl calls on 64 bit systems - */ -#ifdef CONFIG_COMPAT -static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params) -{ - struct MGSL_PARAMS32 tmp_params; - - DBGINFO(("%s get_params32\n", info->device_name)); - memset(&tmp_params, 0, sizeof(tmp_params)); - tmp_params.mode = (compat_ulong_t)info->params.mode; - tmp_params.loopback = info->params.loopback; - tmp_params.flags = info->params.flags; - tmp_params.encoding = info->params.encoding; - tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed; - tmp_params.addr_filter = info->params.addr_filter; - tmp_params.crc_type = info->params.crc_type; - tmp_params.preamble_length = info->params.preamble_length; - tmp_params.preamble = info->params.preamble; - tmp_params.data_rate = (compat_ulong_t)info->params.data_rate; - tmp_params.data_bits = info->params.data_bits; - tmp_params.stop_bits = info->params.stop_bits; - tmp_params.parity = info->params.parity; - if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32))) - return -EFAULT; - return 0; -} - -static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params) -{ - struct MGSL_PARAMS32 tmp_params; - - DBGINFO(("%s set_params32\n", info->device_name)); - if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32))) - return -EFAULT; - - spin_lock(&info->lock); - if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) { - info->base_clock = tmp_params.clock_speed; - } else { - info->params.mode = tmp_params.mode; - info->params.loopback = tmp_params.loopback; - info->params.flags = tmp_params.flags; - info->params.encoding = tmp_params.encoding; - info->params.clock_speed = tmp_params.clock_speed; - info->params.addr_filter = tmp_params.addr_filter; - info->params.crc_type = tmp_params.crc_type; - info->params.preamble_length = tmp_params.preamble_length; - info->params.preamble = tmp_params.preamble; - info->params.data_rate = tmp_params.data_rate; - info->params.data_bits = tmp_params.data_bits; - info->params.stop_bits = tmp_params.stop_bits; - info->params.parity = tmp_params.parity; - } - spin_unlock(&info->lock); - - program_hw(info); - - return 0; -} - -static long slgt_compat_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct slgt_info *info = tty->driver_data; - int rc = -ENOIOCTLCMD; - - if (sanity_check(info, tty->name, "compat_ioctl")) - return -ENODEV; - DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd)); - - switch (cmd) { - - case MGSL_IOCSPARAMS32: - rc = set_params32(info, compat_ptr(arg)); - break; - - case MGSL_IOCGPARAMS32: - rc = get_params32(info, compat_ptr(arg)); - break; - - case MGSL_IOCGPARAMS: - case MGSL_IOCSPARAMS: - case MGSL_IOCGTXIDLE: - case MGSL_IOCGSTATS: - case MGSL_IOCWAITEVENT: - case MGSL_IOCGIF: - case MGSL_IOCSGPIO: - case MGSL_IOCGGPIO: - case MGSL_IOCWAITGPIO: - case MGSL_IOCGXSYNC: - case MGSL_IOCGXCTRL: - case MGSL_IOCSTXIDLE: - case MGSL_IOCTXENABLE: - case MGSL_IOCRXENABLE: - case MGSL_IOCTXABORT: - case TIOCMIWAIT: - case MGSL_IOCSIF: - case MGSL_IOCSXSYNC: - case MGSL_IOCSXCTRL: - rc = ioctl(tty, cmd, arg); - break; - } - - DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc)); - return rc; -} -#else -#define slgt_compat_ioctl NULL -#endif /* ifdef CONFIG_COMPAT */ - -/* - * proc fs support - */ -static inline void line_info(struct seq_file *m, struct slgt_info *info) -{ - char stat_buf[30]; - unsigned long flags; - - seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n", - info->device_name, info->phys_reg_addr, - info->irq_level, info->max_frame_size); - - /* output current serial signal states */ - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (info->signals & SerialSignal_RTS) - strcat(stat_buf, "|RTS"); - if (info->signals & SerialSignal_CTS) - strcat(stat_buf, "|CTS"); - if (info->signals & SerialSignal_DTR) - strcat(stat_buf, "|DTR"); - if (info->signals & SerialSignal_DSR) - strcat(stat_buf, "|DSR"); - if (info->signals & SerialSignal_DCD) - strcat(stat_buf, "|CD"); - if (info->signals & SerialSignal_RI) - strcat(stat_buf, "|RI"); - - if (info->params.mode != MGSL_MODE_ASYNC) { - seq_printf(m, "\tHDLC txok:%d rxok:%d", - info->icount.txok, info->icount.rxok); - if (info->icount.txunder) - seq_printf(m, " txunder:%d", info->icount.txunder); - if (info->icount.txabort) - seq_printf(m, " txabort:%d", info->icount.txabort); - if (info->icount.rxshort) - seq_printf(m, " rxshort:%d", info->icount.rxshort); - if (info->icount.rxlong) - seq_printf(m, " rxlong:%d", info->icount.rxlong); - if (info->icount.rxover) - seq_printf(m, " rxover:%d", info->icount.rxover); - if (info->icount.rxcrc) - seq_printf(m, " rxcrc:%d", info->icount.rxcrc); - } else { - seq_printf(m, "\tASYNC tx:%d rx:%d", - info->icount.tx, info->icount.rx); - if (info->icount.frame) - seq_printf(m, " fe:%d", info->icount.frame); - if (info->icount.parity) - seq_printf(m, " pe:%d", info->icount.parity); - if (info->icount.brk) - seq_printf(m, " brk:%d", info->icount.brk); - if (info->icount.overrun) - seq_printf(m, " oe:%d", info->icount.overrun); - } - - /* Append serial signal status to end */ - seq_printf(m, " %s\n", stat_buf+1); - - seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", - info->tx_active,info->bh_requested,info->bh_running, - info->pending_bh); -} - -/* Called to print information about devices - */ -static int synclink_gt_proc_show(struct seq_file *m, void *v) -{ - struct slgt_info *info; - - seq_puts(m, "synclink_gt driver\n"); - - info = slgt_device_list; - while( info ) { - line_info(m, info); - info = info->next_device; - } - return 0; -} - -static int synclink_gt_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, synclink_gt_proc_show, NULL); -} - -static const struct file_operations synclink_gt_proc_fops = { - .owner = THIS_MODULE, - .open = synclink_gt_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * return count of bytes in transmit buffer - */ -static int chars_in_buffer(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - int count; - if (sanity_check(info, tty->name, "chars_in_buffer")) - return 0; - count = tbuf_bytes(info); - DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count)); - return count; -} - -/* - * signal remote device to throttle send data (our receive data) - */ -static void throttle(struct tty_struct * tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "throttle")) - return; - DBGINFO(("%s throttle\n", info->device_name)); - if (I_IXOFF(tty)) - send_xchar(tty, STOP_CHAR(tty)); - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); - info->signals &= ~SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* - * signal remote device to stop throttling send data (our receive data) - */ -static void unthrottle(struct tty_struct * tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "unthrottle")) - return; - DBGINFO(("%s unthrottle\n", info->device_name)); - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - send_xchar(tty, START_CHAR(tty)); - } - if (tty->termios->c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); - info->signals |= SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* - * set or clear transmit break condition - * break_state -1=set break condition, 0=clear - */ -static int set_break(struct tty_struct *tty, int break_state) -{ - struct slgt_info *info = tty->driver_data; - unsigned short value; - unsigned long flags; - - if (sanity_check(info, tty->name, "set_break")) - return -EINVAL; - DBGINFO(("%s set_break(%d)\n", info->device_name, break_state)); - - spin_lock_irqsave(&info->lock,flags); - value = rd_reg16(info, TCR); - if (break_state == -1) - value |= BIT6; - else - value &= ~BIT6; - wr_reg16(info, TCR, value); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -#if SYNCLINK_GENERIC_HDLC - -/** - * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) - * set encoding and frame check sequence (FCS) options - * - * dev pointer to network device structure - * encoding serial encoding setting - * parity FCS setting - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - struct slgt_info *info = dev_to_port(dev); - unsigned char new_encoding; - unsigned short new_crctype; - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - DBGINFO(("%s hdlcdev_attach\n", info->device_name)); - - switch (encoding) - { - case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; - case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; - case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; - case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; - case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; - default: return -EINVAL; - } - - switch (parity) - { - case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; - case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; - case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; - default: return -EINVAL; - } - - info->params.encoding = new_encoding; - info->params.crc_type = new_crctype; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - - return 0; -} - -/** - * called by generic HDLC layer to send frame - * - * skb socket buffer containing HDLC frame - * dev pointer to network device structure - */ -static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct slgt_info *info = dev_to_port(dev); - unsigned long flags; - - DBGINFO(("%s hdlc_xmit\n", dev->name)); - - if (!skb->len) - return NETDEV_TX_OK; - - /* stop sending until this frame completes */ - netif_stop_queue(dev); - - /* update network statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - - /* save start time for transmit timeout detection */ - dev->trans_start = jiffies; - - spin_lock_irqsave(&info->lock, flags); - tx_load(info, skb->data, skb->len); - spin_unlock_irqrestore(&info->lock, flags); - - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - -/** - * called by network layer when interface enabled - * claim resources and initialize hardware - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_open(struct net_device *dev) -{ - struct slgt_info *info = dev_to_port(dev); - int rc; - unsigned long flags; - - if (!try_module_get(THIS_MODULE)) - return -EBUSY; - - DBGINFO(("%s hdlcdev_open\n", dev->name)); - - /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) - return rc; - - /* arbitrate between network and tty opens */ - spin_lock_irqsave(&info->netlock, flags); - if (info->port.count != 0 || info->netcount != 0) { - DBGINFO(("%s hdlc_open busy\n", dev->name)); - spin_unlock_irqrestore(&info->netlock, flags); - return -EBUSY; - } - info->netcount=1; - spin_unlock_irqrestore(&info->netlock, flags); - - /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - return rc; - } - - /* assert DTR and RTS, apply hardware settings */ - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - program_hw(info); - - /* enable network layer transmit */ - dev->trans_start = jiffies; - netif_start_queue(dev); - - /* inform generic HDLC layer of current DCD status */ - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - if (info->signals & SerialSignal_DCD) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - return 0; -} - -/** - * called by network layer when interface is disabled - * shutdown hardware and release resources - * - * dev pointer to network device structure - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_close(struct net_device *dev) -{ - struct slgt_info *info = dev_to_port(dev); - unsigned long flags; - - DBGINFO(("%s hdlcdev_close\n", dev->name)); - - netif_stop_queue(dev); - - /* shutdown adapter and release resources */ - shutdown(info); - - hdlc_close(dev); - - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - - module_put(THIS_MODULE); - return 0; -} - -/** - * called by network layer to process IOCTL call to network device - * - * dev pointer to network device structure - * ifr pointer to network interface request structure - * cmd IOCTL command code - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - const size_t size = sizeof(sync_serial_settings); - sync_serial_settings new_line; - sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; - struct slgt_info *info = dev_to_port(dev); - unsigned int flags; - - DBGINFO(("%s hdlcdev_ioctl\n", dev->name)); - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - if (cmd != SIOCWANDEV) - return hdlc_ioctl(dev, ifr, cmd); - - memset(&new_line, 0, sizeof(new_line)); - - switch(ifr->ifr_settings.type) { - case IF_GET_IFACE: /* return current sync_serial_settings */ - - ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; - if (ifr->ifr_settings.size < size) { - ifr->ifr_settings.size = size; /* data size wanted */ - return -ENOBUFS; - } - - flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - - switch (flags){ - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; - case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; - default: new_line.clock_type = CLOCK_DEFAULT; - } - - new_line.clock_rate = info->params.clock_speed; - new_line.loopback = info->params.loopback ? 1:0; - - if (copy_to_user(line, &new_line, size)) - return -EFAULT; - return 0; - - case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&new_line, line, size)) - return -EFAULT; - - switch (new_line.clock_type) - { - case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; - case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; - case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; - case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; - case CLOCK_DEFAULT: flags = info->params.flags & - (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; - default: return -EINVAL; - } - - if (new_line.loopback != 0 && new_line.loopback != 1) - return -EINVAL; - - info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - info->params.flags |= flags; - - info->params.loopback = new_line.loopback; - - if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) - info->params.clock_speed = new_line.clock_rate; - else - info->params.clock_speed = 0; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - return 0; - - default: - return hdlc_ioctl(dev, ifr, cmd); - } -} - -/** - * called by network layer when transmit timeout is detected - * - * dev pointer to network device structure - */ -static void hdlcdev_tx_timeout(struct net_device *dev) -{ - struct slgt_info *info = dev_to_port(dev); - unsigned long flags; - - DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name)); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - spin_lock_irqsave(&info->lock,flags); - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); - - netif_wake_queue(dev); -} - -/** - * called by device driver when transmit completes - * reenable network layer transmit if stopped - * - * info pointer to device instance information - */ -static void hdlcdev_tx_done(struct slgt_info *info) -{ - if (netif_queue_stopped(info->netdev)) - netif_wake_queue(info->netdev); -} - -/** - * called by device driver when frame received - * pass frame to network layer - * - * info pointer to device instance information - * buf pointer to buffer contianing frame data - * size count of data bytes in buf - */ -static void hdlcdev_rx(struct slgt_info *info, char *buf, int size) -{ - struct sk_buff *skb = dev_alloc_skb(size); - struct net_device *dev = info->netdev; - - DBGINFO(("%s hdlcdev_rx\n", dev->name)); - - if (skb == NULL) { - DBGERR(("%s: can't alloc skb, drop packet\n", dev->name)); - dev->stats.rx_dropped++; - return; - } - - memcpy(skb_put(skb, size), buf, size); - - skb->protocol = hdlc_type_trans(skb, dev); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - - netif_rx(skb); -} - -static const struct net_device_ops hdlcdev_ops = { - .ndo_open = hdlcdev_open, - .ndo_stop = hdlcdev_close, - .ndo_change_mtu = hdlc_change_mtu, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_do_ioctl = hdlcdev_ioctl, - .ndo_tx_timeout = hdlcdev_tx_timeout, -}; - -/** - * called by device driver when adding device instance - * do generic HDLC initialization - * - * info pointer to device instance information - * - * returns 0 if success, otherwise error code - */ -static int hdlcdev_init(struct slgt_info *info) -{ - int rc; - struct net_device *dev; - hdlc_device *hdlc; - - /* allocate and initialize network and HDLC layer objects */ - - if (!(dev = alloc_hdlcdev(info))) { - printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); - return -ENOMEM; - } - - /* for network layer reporting purposes only */ - dev->mem_start = info->phys_reg_addr; - dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1; - dev->irq = info->irq_level; - - /* network layer callbacks and settings */ - dev->netdev_ops = &hdlcdev_ops; - dev->watchdog_timeo = 10 * HZ; - dev->tx_queue_len = 50; - - /* generic HDLC layer callbacks and settings */ - hdlc = dev_to_hdlc(dev); - hdlc->attach = hdlcdev_attach; - hdlc->xmit = hdlcdev_xmit; - - /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { - printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); - free_netdev(dev); - return rc; - } - - info->netdev = dev; - return 0; -} - -/** - * called by device driver when removing device instance - * do generic HDLC cleanup - * - * info pointer to device instance information - */ -static void hdlcdev_exit(struct slgt_info *info) -{ - unregister_hdlc_device(info->netdev); - free_netdev(info->netdev); - info->netdev = NULL; -} - -#endif /* ifdef CONFIG_HDLC */ - -/* - * get async data from rx DMA buffers - */ -static void rx_async(struct slgt_info *info) -{ - struct tty_struct *tty = info->port.tty; - struct mgsl_icount *icount = &info->icount; - unsigned int start, end; - unsigned char *p; - unsigned char status; - struct slgt_desc *bufs = info->rbufs; - int i, count; - int chars = 0; - int stat; - unsigned char ch; - - start = end = info->rbuf_current; - - while(desc_complete(bufs[end])) { - count = desc_count(bufs[end]) - info->rbuf_index; - p = bufs[end].buf + info->rbuf_index; - - DBGISR(("%s rx_async count=%d\n", info->device_name, count)); - DBGDATA(info, p, count, "rx"); - - for(i=0 ; i < count; i+=2, p+=2) { - ch = *p; - icount->rx++; - - stat = 0; - - if ((status = *(p+1) & (BIT1 + BIT0))) { - if (status & BIT1) - icount->parity++; - else if (status & BIT0) - icount->frame++; - /* discard char if tty control flags say so */ - if (status & info->ignore_status_mask) - continue; - if (status & BIT1) - stat = TTY_PARITY; - else if (status & BIT0) - stat = TTY_FRAME; - } - if (tty) { - tty_insert_flip_char(tty, ch, stat); - chars++; - } - } - - if (i < count) { - /* receive buffer not completed */ - info->rbuf_index += i; - mod_timer(&info->rx_timer, jiffies + 1); - break; - } - - info->rbuf_index = 0; - free_rbufs(info, end, end); - - if (++end == info->rbuf_count) - end = 0; - - /* if entire list searched then no frame available */ - if (end == start) - break; - } - - if (tty && chars) - tty_flip_buffer_push(tty); -} - -/* - * return next bottom half action to perform - */ -static int bh_action(struct slgt_info *info) -{ - unsigned long flags; - int rc; - - spin_lock_irqsave(&info->lock,flags); - - if (info->pending_bh & BH_RECEIVE) { - info->pending_bh &= ~BH_RECEIVE; - rc = BH_RECEIVE; - } else if (info->pending_bh & BH_TRANSMIT) { - info->pending_bh &= ~BH_TRANSMIT; - rc = BH_TRANSMIT; - } else if (info->pending_bh & BH_STATUS) { - info->pending_bh &= ~BH_STATUS; - rc = BH_STATUS; - } else { - /* Mark BH routine as complete */ - info->bh_running = false; - info->bh_requested = false; - rc = 0; - } - - spin_unlock_irqrestore(&info->lock,flags); - - return rc; -} - -/* - * perform bottom half processing - */ -static void bh_handler(struct work_struct *work) -{ - struct slgt_info *info = container_of(work, struct slgt_info, task); - int action; - - if (!info) - return; - info->bh_running = true; - - while((action = bh_action(info))) { - switch (action) { - case BH_RECEIVE: - DBGBH(("%s bh receive\n", info->device_name)); - switch(info->params.mode) { - case MGSL_MODE_ASYNC: - rx_async(info); - break; - case MGSL_MODE_HDLC: - while(rx_get_frame(info)); - break; - case MGSL_MODE_RAW: - case MGSL_MODE_MONOSYNC: - case MGSL_MODE_BISYNC: - case MGSL_MODE_XSYNC: - while(rx_get_buf(info)); - break; - } - /* restart receiver if rx DMA buffers exhausted */ - if (info->rx_restart) - rx_start(info); - break; - case BH_TRANSMIT: - bh_transmit(info); - break; - case BH_STATUS: - DBGBH(("%s bh status\n", info->device_name)); - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - break; - default: - DBGBH(("%s unknown action\n", info->device_name)); - break; - } - } - DBGBH(("%s bh_handler exit\n", info->device_name)); -} - -static void bh_transmit(struct slgt_info *info) -{ - struct tty_struct *tty = info->port.tty; - - DBGBH(("%s bh_transmit\n", info->device_name)); - if (tty) - tty_wakeup(tty); -} - -static void dsr_change(struct slgt_info *info, unsigned short status) -{ - if (status & BIT3) { - info->signals |= SerialSignal_DSR; - info->input_signal_events.dsr_up++; - } else { - info->signals &= ~SerialSignal_DSR; - info->input_signal_events.dsr_down++; - } - DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals)); - if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { - slgt_irq_off(info, IRQ_DSR); - return; - } - info->icount.dsr++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; -} - -static void cts_change(struct slgt_info *info, unsigned short status) -{ - if (status & BIT2) { - info->signals |= SerialSignal_CTS; - info->input_signal_events.cts_up++; - } else { - info->signals &= ~SerialSignal_CTS; - info->input_signal_events.cts_down++; - } - DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals)); - if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { - slgt_irq_off(info, IRQ_CTS); - return; - } - info->icount.cts++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; - - if (info->port.flags & ASYNC_CTS_FLOW) { - if (info->port.tty) { - if (info->port.tty->hw_stopped) { - if (info->signals & SerialSignal_CTS) { - info->port.tty->hw_stopped = 0; - info->pending_bh |= BH_TRANSMIT; - return; - } - } else { - if (!(info->signals & SerialSignal_CTS)) - info->port.tty->hw_stopped = 1; - } - } - } -} - -static void dcd_change(struct slgt_info *info, unsigned short status) -{ - if (status & BIT1) { - info->signals |= SerialSignal_DCD; - info->input_signal_events.dcd_up++; - } else { - info->signals &= ~SerialSignal_DCD; - info->input_signal_events.dcd_down++; - } - DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals)); - if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { - slgt_irq_off(info, IRQ_DCD); - return; - } - info->icount.dcd++; -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) { - if (info->signals & SerialSignal_DCD) - netif_carrier_on(info->netdev); - else - netif_carrier_off(info->netdev); - } -#endif - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; - - if (info->port.flags & ASYNC_CHECK_CD) { - if (info->signals & SerialSignal_DCD) - wake_up_interruptible(&info->port.open_wait); - else { - if (info->port.tty) - tty_hangup(info->port.tty); - } - } -} - -static void ri_change(struct slgt_info *info, unsigned short status) -{ - if (status & BIT0) { - info->signals |= SerialSignal_RI; - info->input_signal_events.ri_up++; - } else { - info->signals &= ~SerialSignal_RI; - info->input_signal_events.ri_down++; - } - DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals)); - if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { - slgt_irq_off(info, IRQ_RI); - return; - } - info->icount.rng++; - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - info->pending_bh |= BH_STATUS; -} - -static void isr_rxdata(struct slgt_info *info) -{ - unsigned int count = info->rbuf_fill_count; - unsigned int i = info->rbuf_fill_index; - unsigned short reg; - - while (rd_reg16(info, SSR) & IRQ_RXDATA) { - reg = rd_reg16(info, RDR); - DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); - if (desc_complete(info->rbufs[i])) { - /* all buffers full */ - rx_stop(info); - info->rx_restart = 1; - continue; - } - info->rbufs[i].buf[count++] = (unsigned char)reg; - /* async mode saves status byte to buffer for each data byte */ - if (info->params.mode == MGSL_MODE_ASYNC) - info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); - if (count == info->rbuf_fill_level || (reg & BIT10)) { - /* buffer full or end of frame */ - set_desc_count(info->rbufs[i], count); - set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); - info->rbuf_fill_count = count = 0; - if (++i == info->rbuf_count) - i = 0; - info->pending_bh |= BH_RECEIVE; - } - } - - info->rbuf_fill_index = i; - info->rbuf_fill_count = count; -} - -static void isr_serial(struct slgt_info *info) -{ - unsigned short status = rd_reg16(info, SSR); - - DBGISR(("%s isr_serial status=%04X\n", info->device_name, status)); - - wr_reg16(info, SSR, status); /* clear pending */ - - info->irq_occurred = true; - - if (info->params.mode == MGSL_MODE_ASYNC) { - if (status & IRQ_TXIDLE) { - if (info->tx_active) - isr_txeom(info, status); - } - if (info->rx_pio && (status & IRQ_RXDATA)) - isr_rxdata(info); - if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { - info->icount.brk++; - /* process break detection if tty control allows */ - if (info->port.tty) { - if (!(status & info->ignore_status_mask)) { - if (info->read_status_mask & MASK_BREAK) { - tty_insert_flip_char(info->port.tty, 0, TTY_BREAK); - if (info->port.flags & ASYNC_SAK) - do_SAK(info->port.tty); - } - } - } - } - } else { - if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) - isr_txeom(info, status); - if (info->rx_pio && (status & IRQ_RXDATA)) - isr_rxdata(info); - if (status & IRQ_RXIDLE) { - if (status & RXIDLE) - info->icount.rxidle++; - else - info->icount.exithunt++; - wake_up_interruptible(&info->event_wait_q); - } - - if (status & IRQ_RXOVER) - rx_start(info); - } - - if (status & IRQ_DSR) - dsr_change(info, status); - if (status & IRQ_CTS) - cts_change(info, status); - if (status & IRQ_DCD) - dcd_change(info, status); - if (status & IRQ_RI) - ri_change(info, status); -} - -static void isr_rdma(struct slgt_info *info) -{ - unsigned int status = rd_reg32(info, RDCSR); - - DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status)); - - /* RDCSR (rx DMA control/status) - * - * 31..07 reserved - * 06 save status byte to DMA buffer - * 05 error - * 04 eol (end of list) - * 03 eob (end of buffer) - * 02 IRQ enable - * 01 reset - * 00 enable - */ - wr_reg32(info, RDCSR, status); /* clear pending */ - - if (status & (BIT5 + BIT4)) { - DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name)); - info->rx_restart = true; - } - info->pending_bh |= BH_RECEIVE; -} - -static void isr_tdma(struct slgt_info *info) -{ - unsigned int status = rd_reg32(info, TDCSR); - - DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status)); - - /* TDCSR (tx DMA control/status) - * - * 31..06 reserved - * 05 error - * 04 eol (end of list) - * 03 eob (end of buffer) - * 02 IRQ enable - * 01 reset - * 00 enable - */ - wr_reg32(info, TDCSR, status); /* clear pending */ - - if (status & (BIT5 + BIT4 + BIT3)) { - // another transmit buffer has completed - // run bottom half to get more send data from user - info->pending_bh |= BH_TRANSMIT; - } -} - -/* - * return true if there are unsent tx DMA buffers, otherwise false - * - * if there are unsent buffers then info->tbuf_start - * is set to index of first unsent buffer - */ -static bool unsent_tbufs(struct slgt_info *info) -{ - unsigned int i = info->tbuf_current; - bool rc = false; - - /* - * search backwards from last loaded buffer (precedes tbuf_current) - * for first unsent buffer (desc_count > 0) - */ - - do { - if (i) - i--; - else - i = info->tbuf_count - 1; - if (!desc_count(info->tbufs[i])) - break; - info->tbuf_start = i; - rc = true; - } while (i != info->tbuf_current); - - return rc; -} - -static void isr_txeom(struct slgt_info *info, unsigned short status) -{ - DBGISR(("%s txeom status=%04x\n", info->device_name, status)); - - slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); - tdma_reset(info); - if (status & IRQ_TXUNDER) { - unsigned short val = rd_reg16(info, TCR); - wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ - wr_reg16(info, TCR, val); /* clear reset bit */ - } - - if (info->tx_active) { - if (info->params.mode != MGSL_MODE_ASYNC) { - if (status & IRQ_TXUNDER) - info->icount.txunder++; - else if (status & IRQ_TXIDLE) - info->icount.txok++; - } - - if (unsent_tbufs(info)) { - tx_start(info); - update_tx_timer(info); - return; - } - info->tx_active = false; - - del_timer(&info->tx_timer); - - if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { - info->signals &= ~SerialSignal_RTS; - info->drop_rts_on_tx_done = false; - set_signals(info); - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { - tx_stop(info); - return; - } - info->pending_bh |= BH_TRANSMIT; - } - } -} - -static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state) -{ - struct cond_wait *w, *prev; - - /* wake processes waiting for specific transitions */ - for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) { - if (w->data & changed) { - w->data = state; - wake_up_interruptible(&w->q); - if (prev != NULL) - prev->next = w->next; - else - info->gpio_wait_q = w->next; - } else - prev = w; - } -} - -/* interrupt service routine - * - * irq interrupt number - * dev_id device ID supplied during interrupt registration - */ -static irqreturn_t slgt_interrupt(int dummy, void *dev_id) -{ - struct slgt_info *info = dev_id; - unsigned int gsr; - unsigned int i; - - DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level)); - - while((gsr = rd_reg32(info, GSR) & 0xffffff00)) { - DBGISR(("%s gsr=%08x\n", info->device_name, gsr)); - info->irq_occurred = true; - for(i=0; i < info->port_count ; i++) { - if (info->port_array[i] == NULL) - continue; - spin_lock(&info->port_array[i]->lock); - if (gsr & (BIT8 << i)) - isr_serial(info->port_array[i]); - if (gsr & (BIT16 << (i*2))) - isr_rdma(info->port_array[i]); - if (gsr & (BIT17 << (i*2))) - isr_tdma(info->port_array[i]); - spin_unlock(&info->port_array[i]->lock); - } - } - - if (info->gpio_present) { - unsigned int state; - unsigned int changed; - spin_lock(&info->lock); - while ((changed = rd_reg32(info, IOSR)) != 0) { - DBGISR(("%s iosr=%08x\n", info->device_name, changed)); - /* read latched state of GPIO signals */ - state = rd_reg32(info, IOVR); - /* clear pending GPIO interrupt bits */ - wr_reg32(info, IOSR, changed); - for (i=0 ; i < info->port_count ; i++) { - if (info->port_array[i] != NULL) - isr_gpio(info->port_array[i], changed, state); - } - } - spin_unlock(&info->lock); - } - - for(i=0; i < info->port_count ; i++) { - struct slgt_info *port = info->port_array[i]; - if (port == NULL) - continue; - spin_lock(&port->lock); - if ((port->port.count || port->netcount) && - port->pending_bh && !port->bh_running && - !port->bh_requested) { - DBGISR(("%s bh queued\n", port->device_name)); - schedule_work(&port->task); - port->bh_requested = true; - } - spin_unlock(&port->lock); - } - - DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level)); - return IRQ_HANDLED; -} - -static int startup(struct slgt_info *info) -{ - DBGINFO(("%s startup\n", info->device_name)); - - if (info->port.flags & ASYNC_INITIALIZED) - return 0; - - if (!info->tx_buf) { - info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); - if (!info->tx_buf) { - DBGERR(("%s can't allocate tx buffer\n", info->device_name)); - return -ENOMEM; - } - } - - info->pending_bh = 0; - - memset(&info->icount, 0, sizeof(info->icount)); - - /* program hardware for current parameters */ - change_params(info); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags |= ASYNC_INITIALIZED; - - return 0; -} - -/* - * called by close() and hangup() to shutdown hardware - */ -static void shutdown(struct slgt_info *info) -{ - unsigned long flags; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - - DBGINFO(("%s shutdown\n", info->device_name)); - - /* clear status wait queue because status changes */ - /* can't happen after shutting down the hardware */ - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - del_timer_sync(&info->tx_timer); - del_timer_sync(&info->rx_timer); - - kfree(info->tx_buf); - info->tx_buf = NULL; - - spin_lock_irqsave(&info->lock,flags); - - tx_stop(info); - rx_stop(info); - - slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); - - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { - info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - set_signals(info); - } - - flush_cond_wait(&info->gpio_wait_q); - - spin_unlock_irqrestore(&info->lock,flags); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; -} - -static void program_hw(struct slgt_info *info) -{ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - - rx_stop(info); - tx_stop(info); - - if (info->params.mode != MGSL_MODE_ASYNC || - info->netcount) - sync_mode(info); - else - async_mode(info); - - set_signals(info); - - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - - slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); - get_signals(info); - - if (info->netcount || - (info->port.tty && info->port.tty->termios->c_cflag & CREAD)) - rx_start(info); - - spin_unlock_irqrestore(&info->lock,flags); -} - -/* - * reconfigure adapter based on new parameters - */ -static void change_params(struct slgt_info *info) -{ - unsigned cflag; - int bits_per_char; - - if (!info->port.tty || !info->port.tty->termios) - return; - DBGINFO(("%s change_params\n", info->device_name)); - - cflag = info->port.tty->termios->c_cflag; - - /* if B0 rate (hangup) specified then negate DTR and RTS */ - /* otherwise assert DTR and RTS */ - if (cflag & CBAUD) - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - - /* byte size and parity */ - - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - default: info->params.data_bits = 7; break; - } - - info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1; - - if (cflag & PARENB) - info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN; - else - info->params.parity = ASYNC_PARITY_NONE; - - /* calculate number of jiffies to transmit a full - * FIFO (32 bytes) at specified data rate - */ - bits_per_char = info->params.data_bits + - info->params.stop_bits + 1; - - info->params.data_rate = tty_get_baud_rate(info->port.tty); - - if (info->params.data_rate) { - info->timeout = (32*HZ*bits_per_char) / - info->params.data_rate; - } - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - if (cflag & CRTSCTS) - info->port.flags |= ASYNC_CTS_FLOW; - else - info->port.flags &= ~ASYNC_CTS_FLOW; - - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - /* process tty input control flags */ - - info->read_status_mask = IRQ_RXOVER; - if (I_INPCK(info->port.tty)) - info->read_status_mask |= MASK_PARITY | MASK_FRAMING; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= MASK_BREAK; - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= MASK_BREAK; - /* If ignoring parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= MASK_OVERRUN; - } - - program_hw(info); -} - -static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount) -{ - DBGINFO(("%s get_stats\n", info->device_name)); - if (!user_icount) { - memset(&info->icount, 0, sizeof(info->icount)); - } else { - if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount))) - return -EFAULT; - } - return 0; -} - -static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params) -{ - DBGINFO(("%s get_params\n", info->device_name)); - if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS))) - return -EFAULT; - return 0; -} - -static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params) -{ - unsigned long flags; - MGSL_PARAMS tmp_params; - - DBGINFO(("%s set_params\n", info->device_name)); - if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS))) - return -EFAULT; - - spin_lock_irqsave(&info->lock, flags); - if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) - info->base_clock = tmp_params.clock_speed; - else - memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->lock, flags); - - program_hw(info); - - return 0; -} - -static int get_txidle(struct slgt_info *info, int __user *idle_mode) -{ - DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode)); - if (put_user(info->idle_mode, idle_mode)) - return -EFAULT; - return 0; -} - -static int set_txidle(struct slgt_info *info, int idle_mode) -{ - unsigned long flags; - DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode)); - spin_lock_irqsave(&info->lock,flags); - info->idle_mode = idle_mode; - if (info->params.mode != MGSL_MODE_ASYNC) - tx_set_idle(info); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int tx_enable(struct slgt_info *info, int enable) -{ - unsigned long flags; - DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable)); - spin_lock_irqsave(&info->lock,flags); - if (enable) { - if (!info->tx_enabled) - tx_start(info); - } else { - if (info->tx_enabled) - tx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* - * abort transmit HDLC frame - */ -static int tx_abort(struct slgt_info *info) -{ - unsigned long flags; - DBGINFO(("%s tx_abort\n", info->device_name)); - spin_lock_irqsave(&info->lock,flags); - tdma_reset(info); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int rx_enable(struct slgt_info *info, int enable) -{ - unsigned long flags; - unsigned int rbuf_fill_level; - DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable)); - spin_lock_irqsave(&info->lock,flags); - /* - * enable[31..16] = receive DMA buffer fill level - * 0 = noop (leave fill level unchanged) - * fill level must be multiple of 4 and <= buffer size - */ - rbuf_fill_level = ((unsigned int)enable) >> 16; - if (rbuf_fill_level) { - if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) { - spin_unlock_irqrestore(&info->lock, flags); - return -EINVAL; - } - info->rbuf_fill_level = rbuf_fill_level; - if (rbuf_fill_level < 128) - info->rx_pio = 1; /* PIO mode */ - else - info->rx_pio = 0; /* DMA mode */ - rx_stop(info); /* restart receiver to use new fill level */ - } - - /* - * enable[1..0] = receiver enable command - * 0 = disable - * 1 = enable - * 2 = enable or force hunt mode if already enabled - */ - enable &= 3; - if (enable) { - if (!info->rx_enabled) - rx_start(info); - else if (enable == 2) { - /* force hunt mode (write 1 to RCR[3]) */ - wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3); - } - } else { - if (info->rx_enabled) - rx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* - * wait for specified event to occur - */ -static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) -{ - unsigned long flags; - int s; - int rc=0; - struct mgsl_icount cprev, cnow; - int events; - int mask; - struct _input_signal_events oldsigs, newsigs; - DECLARE_WAITQUEUE(wait, current); - - if (get_user(mask, mask_ptr)) - return -EFAULT; - - DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask)); - - spin_lock_irqsave(&info->lock,flags); - - /* return immediately if state matches requested events */ - get_signals(info); - s = info->signals; - - events = mask & - ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + - ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + - ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); - if (events) { - spin_unlock_irqrestore(&info->lock,flags); - goto exit; - } - - /* save current irq counts */ - cprev = info->icount; - oldsigs = info->input_signal_events; - - /* enable hunt and idle irqs if needed */ - if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { - unsigned short val = rd_reg16(info, SCR); - if (!(val & IRQ_RXIDLE)) - wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE)); - } - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&info->event_wait_q, &wait); - - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - newsigs = info->input_signal_events; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (newsigs.dsr_up == oldsigs.dsr_up && - newsigs.dsr_down == oldsigs.dsr_down && - newsigs.dcd_up == oldsigs.dcd_up && - newsigs.dcd_down == oldsigs.dcd_down && - newsigs.cts_up == oldsigs.cts_up && - newsigs.cts_down == oldsigs.cts_down && - newsigs.ri_up == oldsigs.ri_up && - newsigs.ri_down == oldsigs.ri_down && - cnow.exithunt == cprev.exithunt && - cnow.rxidle == cprev.rxidle) { - rc = -EIO; - break; - } - - events = mask & - ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + - (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + - (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + - (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + - (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + - (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + - (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + - (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + - (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + - (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); - if (events) - break; - - cprev = cnow; - oldsigs = newsigs; - } - - remove_wait_queue(&info->event_wait_q, &wait); - set_current_state(TASK_RUNNING); - - - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - spin_lock_irqsave(&info->lock,flags); - if (!waitqueue_active(&info->event_wait_q)) { - /* disable enable exit hunt mode/idle rcvd IRQs */ - wr_reg16(info, SCR, - (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE)); - } - spin_unlock_irqrestore(&info->lock,flags); - } -exit: - if (rc == 0) - rc = put_user(events, mask_ptr); - return rc; -} - -static int get_interface(struct slgt_info *info, int __user *if_mode) -{ - DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode)); - if (put_user(info->if_mode, if_mode)) - return -EFAULT; - return 0; -} - -static int set_interface(struct slgt_info *info, int if_mode) -{ - unsigned long flags; - unsigned short val; - - DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode)); - spin_lock_irqsave(&info->lock,flags); - info->if_mode = if_mode; - - msc_set_vcr(info); - - /* TCR (tx control) 07 1=RTS driver control */ - val = rd_reg16(info, TCR); - if (info->if_mode & MGSL_INTERFACE_RTS_EN) - val |= BIT7; - else - val &= ~BIT7; - wr_reg16(info, TCR, val); - - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int get_xsync(struct slgt_info *info, int __user *xsync) -{ - DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync)); - if (put_user(info->xsync, xsync)) - return -EFAULT; - return 0; -} - -/* - * set extended sync pattern (1 to 4 bytes) for extended sync mode - * - * sync pattern is contained in least significant bytes of value - * most significant byte of sync pattern is oldest (1st sent/detected) - */ -static int set_xsync(struct slgt_info *info, int xsync) -{ - unsigned long flags; - - DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync)); - spin_lock_irqsave(&info->lock, flags); - info->xsync = xsync; - wr_reg32(info, XSR, xsync); - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -static int get_xctrl(struct slgt_info *info, int __user *xctrl) -{ - DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl)); - if (put_user(info->xctrl, xctrl)) - return -EFAULT; - return 0; -} - -/* - * set extended control options - * - * xctrl[31:19] reserved, must be zero - * xctrl[18:17] extended sync pattern length in bytes - * 00 = 1 byte in xsr[7:0] - * 01 = 2 bytes in xsr[15:0] - * 10 = 3 bytes in xsr[23:0] - * 11 = 4 bytes in xsr[31:0] - * xctrl[16] 1 = enable terminal count, 0=disabled - * xctrl[15:0] receive terminal count for fixed length packets - * value is count minus one (0 = 1 byte packet) - * when terminal count is reached, receiver - * automatically returns to hunt mode and receive - * FIFO contents are flushed to DMA buffers with - * end of frame (EOF) status - */ -static int set_xctrl(struct slgt_info *info, int xctrl) -{ - unsigned long flags; - - DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl)); - spin_lock_irqsave(&info->lock, flags); - info->xctrl = xctrl; - wr_reg32(info, XCR, xctrl); - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -/* - * set general purpose IO pin state and direction - * - * user_gpio fields: - * state each bit indicates a pin state - * smask set bit indicates pin state to set - * dir each bit indicates a pin direction (0=input, 1=output) - * dmask set bit indicates pin direction to set - */ -static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) -{ - unsigned long flags; - struct gpio_desc gpio; - __u32 data; - - if (!info->gpio_present) - return -EINVAL; - if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) - return -EFAULT; - DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n", - info->device_name, gpio.state, gpio.smask, - gpio.dir, gpio.dmask)); - - spin_lock_irqsave(&info->port_array[0]->lock, flags); - if (gpio.dmask) { - data = rd_reg32(info, IODR); - data |= gpio.dmask & gpio.dir; - data &= ~(gpio.dmask & ~gpio.dir); - wr_reg32(info, IODR, data); - } - if (gpio.smask) { - data = rd_reg32(info, IOVR); - data |= gpio.smask & gpio.state; - data &= ~(gpio.smask & ~gpio.state); - wr_reg32(info, IOVR, data); - } - spin_unlock_irqrestore(&info->port_array[0]->lock, flags); - - return 0; -} - -/* - * get general purpose IO pin state and direction - */ -static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) -{ - struct gpio_desc gpio; - if (!info->gpio_present) - return -EINVAL; - gpio.state = rd_reg32(info, IOVR); - gpio.smask = 0xffffffff; - gpio.dir = rd_reg32(info, IODR); - gpio.dmask = 0xffffffff; - if (copy_to_user(user_gpio, &gpio, sizeof(gpio))) - return -EFAULT; - DBGINFO(("%s get_gpio state=%08x dir=%08x\n", - info->device_name, gpio.state, gpio.dir)); - return 0; -} - -/* - * conditional wait facility - */ -static void init_cond_wait(struct cond_wait *w, unsigned int data) -{ - init_waitqueue_head(&w->q); - init_waitqueue_entry(&w->wait, current); - w->data = data; -} - -static void add_cond_wait(struct cond_wait **head, struct cond_wait *w) -{ - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&w->q, &w->wait); - w->next = *head; - *head = w; -} - -static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw) -{ - struct cond_wait *w, *prev; - remove_wait_queue(&cw->q, &cw->wait); - set_current_state(TASK_RUNNING); - for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) { - if (w == cw) { - if (prev != NULL) - prev->next = w->next; - else - *head = w->next; - break; - } - } -} - -static void flush_cond_wait(struct cond_wait **head) -{ - while (*head != NULL) { - wake_up_interruptible(&(*head)->q); - *head = (*head)->next; - } -} - -/* - * wait for general purpose I/O pin(s) to enter specified state - * - * user_gpio fields: - * state - bit indicates target pin state - * smask - set bit indicates watched pin - * - * The wait ends when at least one watched pin enters the specified - * state. When 0 (no error) is returned, user_gpio->state is set to the - * state of all GPIO pins when the wait ends. - * - * Note: Each pin may be a dedicated input, dedicated output, or - * configurable input/output. The number and configuration of pins - * varies with the specific adapter model. Only input pins (dedicated - * or configured) can be monitored with this function. - */ -static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) -{ - unsigned long flags; - int rc = 0; - struct gpio_desc gpio; - struct cond_wait wait; - u32 state; - - if (!info->gpio_present) - return -EINVAL; - if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) - return -EFAULT; - DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n", - info->device_name, gpio.state, gpio.smask)); - /* ignore output pins identified by set IODR bit */ - if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0) - return -EINVAL; - init_cond_wait(&wait, gpio.smask); - - spin_lock_irqsave(&info->port_array[0]->lock, flags); - /* enable interrupts for watched pins */ - wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask); - /* get current pin states */ - state = rd_reg32(info, IOVR); - - if (gpio.smask & ~(state ^ gpio.state)) { - /* already in target state */ - gpio.state = state; - } else { - /* wait for target state */ - add_cond_wait(&info->gpio_wait_q, &wait); - spin_unlock_irqrestore(&info->port_array[0]->lock, flags); - schedule(); - if (signal_pending(current)) - rc = -ERESTARTSYS; - else - gpio.state = wait.data; - spin_lock_irqsave(&info->port_array[0]->lock, flags); - remove_cond_wait(&info->gpio_wait_q, &wait); - } - - /* disable all GPIO interrupts if no waiting processes */ - if (info->gpio_wait_q == NULL) - wr_reg32(info, IOER, 0); - spin_unlock_irqrestore(&info->port_array[0]->lock, flags); - - if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio))) - rc = -EFAULT; - return rc; -} - -static int modem_input_wait(struct slgt_info *info,int arg) -{ - unsigned long flags; - int rc; - struct mgsl_icount cprev, cnow; - DECLARE_WAITQUEUE(wait, current); - - /* save current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cprev = info->icount; - add_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get new irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; - break; - } - - /* check for change in caller specified modem input */ - if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || - (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || - (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || - (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { - rc = 0; - break; - } - - cprev = cnow; - } - remove_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_RUNNING); - return rc; -} - -/* - * return state of serial control and status signals - */ -static int tiocmget(struct tty_struct *tty) -{ - struct slgt_info *info = tty->driver_data; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + - ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) + - ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) + - ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) + - ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) + - ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0); - - DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result)); - return result; -} - -/* - * set modem control signals (DTR/RTS) - * - * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit - * TIOCMSET = set/clear signal values - * value bit mask for command - */ -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct slgt_info *info = tty->driver_data; - unsigned long flags; - - DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear)); - - if (set & TIOCM_RTS) - info->signals |= SerialSignal_RTS; - if (set & TIOCM_DTR) - info->signals |= SerialSignal_DTR; - if (clear & TIOCM_RTS) - info->signals &= ~SerialSignal_RTS; - if (clear & TIOCM_DTR) - info->signals &= ~SerialSignal_DTR; - - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int carrier_raised(struct tty_port *port) -{ - unsigned long flags; - struct slgt_info *info = container_of(port, struct slgt_info, port); - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - return (info->signals & SerialSignal_DCD) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - unsigned long flags; - struct slgt_info *info = container_of(port, struct slgt_info, port); - - spin_lock_irqsave(&info->lock,flags); - if (on) - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - else - info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); -} - - -/* - * block current process until the device is ready to open - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct slgt_info *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - bool extra_count = false; - unsigned long flags; - int cd; - struct tty_port *port = &info->port; - - DBGINFO(("%s block_til_ready\n", tty->driver->name)); - - if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ - /* nonblock mode is set or port is not enabled */ - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) { - extra_count = true; - port->count--; - } - spin_unlock_irqrestore(&info->lock, flags); - port->blocked_open++; - - while (1) { - if ((tty->termios->c_cflag & CBAUD)) - tty_port_raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ - retval = (port->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - cd = tty_port_carrier_raised(port); - - if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd )) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); - tty_unlock(); - schedule(); - tty_lock(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - if (extra_count) - port->count++; - port->blocked_open--; - - if (!retval) - port->flags |= ASYNC_NORMAL_ACTIVE; - - DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); - return retval; -} - -static int alloc_tmp_rbuf(struct slgt_info *info) -{ - info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL); - if (info->tmp_rbuf == NULL) - return -ENOMEM; - return 0; -} - -static void free_tmp_rbuf(struct slgt_info *info) -{ - kfree(info->tmp_rbuf); - info->tmp_rbuf = NULL; -} - -/* - * allocate DMA descriptor lists. - */ -static int alloc_desc(struct slgt_info *info) -{ - unsigned int i; - unsigned int pbufs; - - /* allocate memory to hold descriptor lists */ - info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr); - if (info->bufs == NULL) - return -ENOMEM; - - memset(info->bufs, 0, DESC_LIST_SIZE); - - info->rbufs = (struct slgt_desc*)info->bufs; - info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count; - - pbufs = (unsigned int)info->bufs_dma_addr; - - /* - * Build circular lists of descriptors - */ - - for (i=0; i < info->rbuf_count; i++) { - /* physical address of this descriptor */ - info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc)); - - /* physical address of next descriptor */ - if (i == info->rbuf_count - 1) - info->rbufs[i].next = cpu_to_le32(pbufs); - else - info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc))); - set_desc_count(info->rbufs[i], DMABUFSIZE); - } - - for (i=0; i < info->tbuf_count; i++) { - /* physical address of this descriptor */ - info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc)); - - /* physical address of next descriptor */ - if (i == info->tbuf_count - 1) - info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc)); - else - info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc))); - } - - return 0; -} - -static void free_desc(struct slgt_info *info) -{ - if (info->bufs != NULL) { - pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr); - info->bufs = NULL; - info->rbufs = NULL; - info->tbufs = NULL; - } -} - -static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) -{ - int i; - for (i=0; i < count; i++) { - if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL) - return -ENOMEM; - bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr); - } - return 0; -} - -static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) -{ - int i; - for (i=0; i < count; i++) { - if (bufs[i].buf == NULL) - continue; - pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr); - bufs[i].buf = NULL; - } -} - -static int alloc_dma_bufs(struct slgt_info *info) -{ - info->rbuf_count = 32; - info->tbuf_count = 32; - - if (alloc_desc(info) < 0 || - alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 || - alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 || - alloc_tmp_rbuf(info) < 0) { - DBGERR(("%s DMA buffer alloc fail\n", info->device_name)); - return -ENOMEM; - } - reset_rbufs(info); - return 0; -} - -static void free_dma_bufs(struct slgt_info *info) -{ - if (info->bufs) { - free_bufs(info, info->rbufs, info->rbuf_count); - free_bufs(info, info->tbufs, info->tbuf_count); - free_desc(info); - } - free_tmp_rbuf(info); -} - -static int claim_resources(struct slgt_info *info) -{ - if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) { - DBGERR(("%s reg addr conflict, addr=%08X\n", - info->device_name, info->phys_reg_addr)); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->reg_addr_requested = true; - - info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE); - if (!info->reg_addr) { - DBGERR(("%s cant map device registers, addr=%08X\n", - info->device_name, info->phys_reg_addr)); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - return 0; - -errout: - release_resources(info); - return -ENODEV; -} - -static void release_resources(struct slgt_info *info) -{ - if (info->irq_requested) { - free_irq(info->irq_level, info); - info->irq_requested = false; - } - - if (info->reg_addr_requested) { - release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE); - info->reg_addr_requested = false; - } - - if (info->reg_addr) { - iounmap(info->reg_addr); - info->reg_addr = NULL; - } -} - -/* Add the specified device instance data structure to the - * global linked list of devices and increment the device count. - */ -static void add_device(struct slgt_info *info) -{ - char *devstr; - - info->next_device = NULL; - info->line = slgt_device_count; - sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line); - - if (info->line < MAX_DEVICES) { - if (maxframe[info->line]) - info->max_frame_size = maxframe[info->line]; - } - - slgt_device_count++; - - if (!slgt_device_list) - slgt_device_list = info; - else { - struct slgt_info *current_dev = slgt_device_list; - while(current_dev->next_device) - current_dev = current_dev->next_device; - current_dev->next_device = info; - } - - if (info->max_frame_size < 4096) - info->max_frame_size = 4096; - else if (info->max_frame_size > 65535) - info->max_frame_size = 65535; - - switch(info->pdev->device) { - case SYNCLINK_GT_DEVICE_ID: - devstr = "GT"; - break; - case SYNCLINK_GT2_DEVICE_ID: - devstr = "GT2"; - break; - case SYNCLINK_GT4_DEVICE_ID: - devstr = "GT4"; - break; - case SYNCLINK_AC_DEVICE_ID: - devstr = "AC"; - info->params.mode = MGSL_MODE_ASYNC; - break; - default: - devstr = "(unknown model)"; - } - printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n", - devstr, info->device_name, info->phys_reg_addr, - info->irq_level, info->max_frame_size); - -#if SYNCLINK_GENERIC_HDLC - hdlcdev_init(info); -#endif -} - -static const struct tty_port_operations slgt_port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - -/* - * allocate device instance structure, return NULL on failure - */ -static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) -{ - struct slgt_info *info; - - info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL); - - if (!info) { - DBGERR(("%s device alloc failed adapter=%d port=%d\n", - driver_name, adapter_num, port_num)); - } else { - tty_port_init(&info->port); - info->port.ops = &slgt_port_ops; - info->magic = MGSL_MAGIC; - INIT_WORK(&info->task, bh_handler); - info->max_frame_size = 4096; - info->base_clock = 14745600; - info->rbuf_fill_level = DMABUFSIZE; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->adapter_num = adapter_num; - info->port_num = port_num; - - setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info); - setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info); - - /* Copy configuration info to device instance data */ - info->pdev = pdev; - info->irq_level = pdev->irq; - info->phys_reg_addr = pci_resource_start(pdev,0); - - info->bus_type = MGSL_BUS_TYPE_PCI; - info->irq_flags = IRQF_SHARED; - - info->init_error = -1; /* assume error, set to 0 on successful init */ - } - - return info; -} - -static void device_init(int adapter_num, struct pci_dev *pdev) -{ - struct slgt_info *port_array[SLGT_MAX_PORTS]; - int i; - int port_count = 1; - - if (pdev->device == SYNCLINK_GT2_DEVICE_ID) - port_count = 2; - else if (pdev->device == SYNCLINK_GT4_DEVICE_ID) - port_count = 4; - - /* allocate device instances for all ports */ - for (i=0; i < port_count; ++i) { - port_array[i] = alloc_dev(adapter_num, i, pdev); - if (port_array[i] == NULL) { - for (--i; i >= 0; --i) - kfree(port_array[i]); - return; - } - } - - /* give copy of port_array to all ports and add to device list */ - for (i=0; i < port_count; ++i) { - memcpy(port_array[i]->port_array, port_array, sizeof(port_array)); - add_device(port_array[i]); - port_array[i]->port_count = port_count; - spin_lock_init(&port_array[i]->lock); - } - - /* Allocate and claim adapter resources */ - if (!claim_resources(port_array[0])) { - - alloc_dma_bufs(port_array[0]); - - /* copy resource information from first port to others */ - for (i = 1; i < port_count; ++i) { - port_array[i]->irq_level = port_array[0]->irq_level; - port_array[i]->reg_addr = port_array[0]->reg_addr; - alloc_dma_bufs(port_array[i]); - } - - if (request_irq(port_array[0]->irq_level, - slgt_interrupt, - port_array[0]->irq_flags, - port_array[0]->device_name, - port_array[0]) < 0) { - DBGERR(("%s request_irq failed IRQ=%d\n", - port_array[0]->device_name, - port_array[0]->irq_level)); - } else { - port_array[0]->irq_requested = true; - adapter_test(port_array[0]); - for (i=1 ; i < port_count ; i++) { - port_array[i]->init_error = port_array[0]->init_error; - port_array[i]->gpio_present = port_array[0]->gpio_present; - } - } - } - - for (i=0; i < port_count; ++i) - tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev)); -} - -static int __devinit init_one(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - if (pci_enable_device(dev)) { - printk("error enabling pci device %p\n", dev); - return -EIO; - } - pci_set_master(dev); - device_init(slgt_device_count, dev); - return 0; -} - -static void __devexit remove_one(struct pci_dev *dev) -{ -} - -static const struct tty_operations ops = { - .open = open, - .close = close, - .write = write, - .put_char = put_char, - .flush_chars = flush_chars, - .write_room = write_room, - .chars_in_buffer = chars_in_buffer, - .flush_buffer = flush_buffer, - .ioctl = ioctl, - .compat_ioctl = slgt_compat_ioctl, - .throttle = throttle, - .unthrottle = unthrottle, - .send_xchar = send_xchar, - .break_ctl = set_break, - .wait_until_sent = wait_until_sent, - .set_termios = set_termios, - .stop = tx_hold, - .start = tx_release, - .hangup = hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, - .get_icount = get_icount, - .proc_fops = &synclink_gt_proc_fops, -}; - -static void slgt_cleanup(void) -{ - int rc; - struct slgt_info *info; - struct slgt_info *tmp; - - printk(KERN_INFO "unload %s\n", driver_name); - - if (serial_driver) { - for (info=slgt_device_list ; info != NULL ; info=info->next_device) - tty_unregister_device(serial_driver, info->line); - if ((rc = tty_unregister_driver(serial_driver))) - DBGERR(("tty_unregister_driver error=%d\n", rc)); - put_tty_driver(serial_driver); - } - - /* reset devices */ - info = slgt_device_list; - while(info) { - reset_port(info); - info = info->next_device; - } - - /* release devices */ - info = slgt_device_list; - while(info) { -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - free_dma_bufs(info); - free_tmp_rbuf(info); - if (info->port_num == 0) - release_resources(info); - tmp = info; - info = info->next_device; - kfree(tmp); - } - - if (pci_registered) - pci_unregister_driver(&pci_driver); -} - -/* - * Driver initialization entry point. - */ -static int __init slgt_init(void) -{ - int rc; - - printk(KERN_INFO "%s\n", driver_name); - - serial_driver = alloc_tty_driver(MAX_DEVICES); - if (!serial_driver) { - printk("%s can't allocate tty driver\n", driver_name); - return -ENOMEM; - } - - /* Initialize the tty_driver structure */ - - serial_driver->owner = THIS_MODULE; - serial_driver->driver_name = tty_driver_name; - serial_driver->name = tty_dev_prefix; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->init_termios.c_ispeed = 9600; - serial_driver->init_termios.c_ospeed = 9600; - serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(serial_driver, &ops); - if ((rc = tty_register_driver(serial_driver)) < 0) { - DBGERR(("%s can't register serial driver\n", driver_name)); - put_tty_driver(serial_driver); - serial_driver = NULL; - goto error; - } - - printk(KERN_INFO "%s, tty major#%d\n", - driver_name, serial_driver->major); - - slgt_device_count = 0; - if ((rc = pci_register_driver(&pci_driver)) < 0) { - printk("%s pci_register_driver error=%d\n", driver_name, rc); - goto error; - } - pci_registered = true; - - if (!slgt_device_list) - printk("%s no devices found\n",driver_name); - - return 0; - -error: - slgt_cleanup(); - return rc; -} - -static void __exit slgt_exit(void) -{ - slgt_cleanup(); -} - -module_init(slgt_init); -module_exit(slgt_exit); - -/* - * register access routines - */ - -#define CALC_REGADDR() \ - unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \ - if (addr >= 0x80) \ - reg_addr += (info->port_num) * 32; \ - else if (addr >= 0x40) \ - reg_addr += (info->port_num) * 16; - -static __u8 rd_reg8(struct slgt_info *info, unsigned int addr) -{ - CALC_REGADDR(); - return readb((void __iomem *)reg_addr); -} - -static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value) -{ - CALC_REGADDR(); - writeb(value, (void __iomem *)reg_addr); -} - -static __u16 rd_reg16(struct slgt_info *info, unsigned int addr) -{ - CALC_REGADDR(); - return readw((void __iomem *)reg_addr); -} - -static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value) -{ - CALC_REGADDR(); - writew(value, (void __iomem *)reg_addr); -} - -static __u32 rd_reg32(struct slgt_info *info, unsigned int addr) -{ - CALC_REGADDR(); - return readl((void __iomem *)reg_addr); -} - -static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value) -{ - CALC_REGADDR(); - writel(value, (void __iomem *)reg_addr); -} - -static void rdma_reset(struct slgt_info *info) -{ - unsigned int i; - - /* set reset bit */ - wr_reg32(info, RDCSR, BIT1); - - /* wait for enable bit cleared */ - for(i=0 ; i < 1000 ; i++) - if (!(rd_reg32(info, RDCSR) & BIT0)) - break; -} - -static void tdma_reset(struct slgt_info *info) -{ - unsigned int i; - - /* set reset bit */ - wr_reg32(info, TDCSR, BIT1); - - /* wait for enable bit cleared */ - for(i=0 ; i < 1000 ; i++) - if (!(rd_reg32(info, TDCSR) & BIT0)) - break; -} - -/* - * enable internal loopback - * TxCLK and RxCLK are generated from BRG - * and TxD is looped back to RxD internally. - */ -static void enable_loopback(struct slgt_info *info) -{ - /* SCR (serial control) BIT2=looopback enable */ - wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* CCR (clock control) - * 07..05 tx clock source (010 = BRG) - * 04..02 rx clock source (010 = BRG) - * 01 auxclk enable (0 = disable) - * 00 BRG enable (1 = enable) - * - * 0100 1001 - */ - wr_reg8(info, CCR, 0x49); - - /* set speed if available, otherwise use default */ - if (info->params.clock_speed) - set_rate(info, info->params.clock_speed); - else - set_rate(info, 3686400); - } -} - -/* - * set baud rate generator to specified rate - */ -static void set_rate(struct slgt_info *info, u32 rate) -{ - unsigned int div; - unsigned int osc = info->base_clock; - - /* div = osc/rate - 1 - * - * Round div up if osc/rate is not integer to - * force to next slowest rate. - */ - - if (rate) { - div = osc/rate; - if (!(osc % rate) && div) - div--; - wr_reg16(info, BDR, (unsigned short)div); - } -} - -static void rx_stop(struct slgt_info *info) -{ - unsigned short val; - - /* disable and reset receiver */ - val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ - wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ - wr_reg16(info, RCR, val); /* clear reset bit */ - - slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE); - - /* clear pending rx interrupts */ - wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER); - - rdma_reset(info); - - info->rx_enabled = false; - info->rx_restart = false; -} - -static void rx_start(struct slgt_info *info) -{ - unsigned short val; - - slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA); - - /* clear pending rx overrun IRQ */ - wr_reg16(info, SSR, IRQ_RXOVER); - - /* reset and disable receiver */ - val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ - wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ - wr_reg16(info, RCR, val); /* clear reset bit */ - - rdma_reset(info); - reset_rbufs(info); - - if (info->rx_pio) { - /* rx request when rx FIFO not empty */ - wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); - slgt_irq_on(info, IRQ_RXDATA); - if (info->params.mode == MGSL_MODE_ASYNC) { - /* enable saving of rx status */ - wr_reg32(info, RDCSR, BIT6); - } - } else { - /* rx request when rx FIFO half full */ - wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); - /* set 1st descriptor address */ - wr_reg32(info, RDDAR, info->rbufs[0].pdesc); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* enable rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT2 + BIT0)); - } else { - /* enable saving of rx status, rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); - } - } - - slgt_irq_on(info, IRQ_RXOVER); - - /* enable receiver */ - wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1)); - - info->rx_restart = false; - info->rx_enabled = true; -} - -static void tx_start(struct slgt_info *info) -{ - if (!info->tx_enabled) { - wr_reg16(info, TCR, - (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2)); - info->tx_enabled = true; - } - - if (desc_count(info->tbufs[info->tbuf_start])) { - info->drop_rts_on_tx_done = false; - - if (info->params.mode != MGSL_MODE_ASYNC) { - if (info->params.flags & HDLC_FLAG_AUTO_RTS) { - get_signals(info); - if (!(info->signals & SerialSignal_RTS)) { - info->signals |= SerialSignal_RTS; - set_signals(info); - info->drop_rts_on_tx_done = true; - } - } - - slgt_irq_off(info, IRQ_TXDATA); - slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE); - /* clear tx idle and underrun status bits */ - wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); - } else { - slgt_irq_off(info, IRQ_TXDATA); - slgt_irq_on(info, IRQ_TXIDLE); - /* clear tx idle status bit */ - wr_reg16(info, SSR, IRQ_TXIDLE); - } - /* set 1st descriptor address and start DMA */ - wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); - wr_reg32(info, TDCSR, BIT2 + BIT0); - info->tx_active = true; - } -} - -static void tx_stop(struct slgt_info *info) -{ - unsigned short val; - - del_timer(&info->tx_timer); - - tdma_reset(info); - - /* reset and disable transmitter */ - val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */ - wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ - - slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); - - /* clear tx idle and underrun status bit */ - wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); - - reset_tbufs(info); - - info->tx_enabled = false; - info->tx_active = false; -} - -static void reset_port(struct slgt_info *info) -{ - if (!info->reg_addr) - return; - - tx_stop(info); - rx_stop(info); - - info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); - set_signals(info); - - slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); -} - -static void reset_adapter(struct slgt_info *info) -{ - int i; - for (i=0; i < info->port_count; ++i) { - if (info->port_array[i]) - reset_port(info->port_array[i]); - } -} - -static void async_mode(struct slgt_info *info) -{ - unsigned short val; - - slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); - tx_stop(info); - rx_stop(info); - - /* TCR (tx control) - * - * 15..13 mode, 010=async - * 12..10 encoding, 000=NRZ - * 09 parity enable - * 08 1=odd parity, 0=even parity - * 07 1=RTS driver control - * 06 1=break enable - * 05..04 character length - * 00=5 bits - * 01=6 bits - * 10=7 bits - * 11=8 bits - * 03 0=1 stop bit, 1=2 stop bits - * 02 reset - * 01 enable - * 00 auto-CTS enable - */ - val = 0x4000; - - if (info->if_mode & MGSL_INTERFACE_RTS_EN) - val |= BIT7; - - if (info->params.parity != ASYNC_PARITY_NONE) { - val |= BIT9; - if (info->params.parity == ASYNC_PARITY_ODD) - val |= BIT8; - } - - switch (info->params.data_bits) - { - case 6: val |= BIT4; break; - case 7: val |= BIT5; break; - case 8: val |= BIT5 + BIT4; break; - } - - if (info->params.stop_bits != 1) - val |= BIT3; - - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - val |= BIT0; - - wr_reg16(info, TCR, val); - - /* RCR (rx control) - * - * 15..13 mode, 010=async - * 12..10 encoding, 000=NRZ - * 09 parity enable - * 08 1=odd parity, 0=even parity - * 07..06 reserved, must be 0 - * 05..04 character length - * 00=5 bits - * 01=6 bits - * 10=7 bits - * 11=8 bits - * 03 reserved, must be zero - * 02 reset - * 01 enable - * 00 auto-DCD enable - */ - val = 0x4000; - - if (info->params.parity != ASYNC_PARITY_NONE) { - val |= BIT9; - if (info->params.parity == ASYNC_PARITY_ODD) - val |= BIT8; - } - - switch (info->params.data_bits) - { - case 6: val |= BIT4; break; - case 7: val |= BIT5; break; - case 8: val |= BIT5 + BIT4; break; - } - - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - val |= BIT0; - - wr_reg16(info, RCR, val); - - /* CCR (clock control) - * - * 07..05 011 = tx clock source is BRG/16 - * 04..02 010 = rx clock source is BRG - * 01 0 = auxclk disabled - * 00 1 = BRG enabled - * - * 0110 1001 - */ - wr_reg8(info, CCR, 0x69); - - msc_set_vcr(info); - - /* SCR (serial control) - * - * 15 1=tx req on FIFO half empty - * 14 1=rx req on FIFO half full - * 13 tx data IRQ enable - * 12 tx idle IRQ enable - * 11 rx break on IRQ enable - * 10 rx data IRQ enable - * 09 rx break off IRQ enable - * 08 overrun IRQ enable - * 07 DSR IRQ enable - * 06 CTS IRQ enable - * 05 DCD IRQ enable - * 04 RI IRQ enable - * 03 0=16x sampling, 1=8x sampling - * 02 1=txd->rxd internal loopback enable - * 01 reserved, must be zero - * 00 1=master IRQ enable - */ - val = BIT15 + BIT14 + BIT0; - /* JCR[8] : 1 = x8 async mode feature available */ - if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate && - ((info->base_clock < (info->params.data_rate * 16)) || - (info->base_clock % (info->params.data_rate * 16)))) { - /* use 8x sampling */ - val |= BIT3; - set_rate(info, info->params.data_rate * 8); - } else { - /* use 16x sampling */ - set_rate(info, info->params.data_rate * 16); - } - wr_reg16(info, SCR, val); - - slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER); - - if (info->params.loopback) - enable_loopback(info); -} - -static void sync_mode(struct slgt_info *info) -{ - unsigned short val; - - slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); - tx_stop(info); - rx_stop(info); - - /* TCR (tx control) - * - * 15..13 mode - * 000=HDLC/SDLC - * 001=raw bit synchronous - * 010=asynchronous/isochronous - * 011=monosync byte synchronous - * 100=bisync byte synchronous - * 101=xsync byte synchronous - * 12..10 encoding - * 09 CRC enable - * 08 CRC32 - * 07 1=RTS driver control - * 06 preamble enable - * 05..04 preamble length - * 03 share open/close flag - * 02 reset - * 01 enable - * 00 auto-CTS enable - */ - val = BIT2; - - switch(info->params.mode) { - case MGSL_MODE_XSYNC: - val |= BIT15 + BIT13; - break; - case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; - case MGSL_MODE_BISYNC: val |= BIT15; break; - case MGSL_MODE_RAW: val |= BIT13; break; - } - if (info->if_mode & MGSL_INTERFACE_RTS_EN) - val |= BIT7; - - switch(info->params.encoding) - { - case HDLC_ENCODING_NRZB: val |= BIT10; break; - case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; - case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; - case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; - case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; - case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; - } - - switch (info->params.crc_type & HDLC_CRC_MASK) - { - case HDLC_CRC_16_CCITT: val |= BIT9; break; - case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; - } - - if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) - val |= BIT6; - - switch (info->params.preamble_length) - { - case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break; - case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break; - case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break; - } - - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - val |= BIT0; - - wr_reg16(info, TCR, val); - - /* TPR (transmit preamble) */ - - switch (info->params.preamble) - { - case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; - case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; - case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break; - case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break; - case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break; - default: val = 0x7e; break; - } - wr_reg8(info, TPR, (unsigned char)val); - - /* RCR (rx control) - * - * 15..13 mode - * 000=HDLC/SDLC - * 001=raw bit synchronous - * 010=asynchronous/isochronous - * 011=monosync byte synchronous - * 100=bisync byte synchronous - * 101=xsync byte synchronous - * 12..10 encoding - * 09 CRC enable - * 08 CRC32 - * 07..03 reserved, must be 0 - * 02 reset - * 01 enable - * 00 auto-DCD enable - */ - val = 0; - - switch(info->params.mode) { - case MGSL_MODE_XSYNC: - val |= BIT15 + BIT13; - break; - case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; - case MGSL_MODE_BISYNC: val |= BIT15; break; - case MGSL_MODE_RAW: val |= BIT13; break; - } - - switch(info->params.encoding) - { - case HDLC_ENCODING_NRZB: val |= BIT10; break; - case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; - case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; - case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; - case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; - case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; - } - - switch (info->params.crc_type & HDLC_CRC_MASK) - { - case HDLC_CRC_16_CCITT: val |= BIT9; break; - case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; - } - - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - val |= BIT0; - - wr_reg16(info, RCR, val); - - /* CCR (clock control) - * - * 07..05 tx clock source - * 04..02 rx clock source - * 01 auxclk enable - * 00 BRG enable - */ - val = 0; - - if (info->params.flags & HDLC_FLAG_TXC_BRG) - { - // when RxC source is DPLL, BRG generates 16X DPLL - // reference clock, so take TxC from BRG/16 to get - // transmit clock at actual data rate - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */ - else - val |= BIT6; /* 010, txclk = BRG */ - } - else if (info->params.flags & HDLC_FLAG_TXC_DPLL) - val |= BIT7; /* 100, txclk = DPLL Input */ - else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN) - val |= BIT5; /* 001, txclk = RXC Input */ - - if (info->params.flags & HDLC_FLAG_RXC_BRG) - val |= BIT3; /* 010, rxclk = BRG */ - else if (info->params.flags & HDLC_FLAG_RXC_DPLL) - val |= BIT4; /* 100, rxclk = DPLL */ - else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN) - val |= BIT2; /* 001, rxclk = TXC Input */ - - if (info->params.clock_speed) - val |= BIT1 + BIT0; - - wr_reg8(info, CCR, (unsigned char)val); - - if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL)) - { - // program DPLL mode - switch(info->params.encoding) - { - case HDLC_ENCODING_BIPHASE_MARK: - case HDLC_ENCODING_BIPHASE_SPACE: - val = BIT7; break; - case HDLC_ENCODING_BIPHASE_LEVEL: - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: - val = BIT7 + BIT6; break; - default: val = BIT6; // NRZ encodings - } - wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val)); - - // DPLL requires a 16X reference clock from BRG - set_rate(info, info->params.clock_speed * 16); - } - else - set_rate(info, info->params.clock_speed); - - tx_set_idle(info); - - msc_set_vcr(info); - - /* SCR (serial control) - * - * 15 1=tx req on FIFO half empty - * 14 1=rx req on FIFO half full - * 13 tx data IRQ enable - * 12 tx idle IRQ enable - * 11 underrun IRQ enable - * 10 rx data IRQ enable - * 09 rx idle IRQ enable - * 08 overrun IRQ enable - * 07 DSR IRQ enable - * 06 CTS IRQ enable - * 05 DCD IRQ enable - * 04 RI IRQ enable - * 03 reserved, must be zero - * 02 1=txd->rxd internal loopback enable - * 01 reserved, must be zero - * 00 1=master IRQ enable - */ - wr_reg16(info, SCR, BIT15 + BIT14 + BIT0); - - if (info->params.loopback) - enable_loopback(info); -} - -/* - * set transmit idle mode - */ -static void tx_set_idle(struct slgt_info *info) -{ - unsigned char val; - unsigned short tcr; - - /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits - * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits - */ - tcr = rd_reg16(info, TCR); - if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) { - /* disable preamble, set idle size to 16 bits */ - tcr = (tcr & ~(BIT6 + BIT5)) | BIT4; - /* MSB of 16 bit idle specified in tx preamble register (TPR) */ - wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff)); - } else if (!(tcr & BIT6)) { - /* preamble is disabled, set idle size to 8 bits */ - tcr &= ~(BIT5 + BIT4); - } - wr_reg16(info, TCR, tcr); - - if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) { - /* LSB of custom tx idle specified in tx idle register */ - val = (unsigned char)(info->idle_mode & 0xff); - } else { - /* standard 8 bit idle patterns */ - switch(info->idle_mode) - { - case HDLC_TXIDLE_FLAGS: val = 0x7e; break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: - case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break; - case HDLC_TXIDLE_ZEROS: - case HDLC_TXIDLE_SPACE: val = 0x00; break; - default: val = 0xff; - } - } - - wr_reg8(info, TIR, val); -} - -/* - * get state of V24 status (input) signals - */ -static void get_signals(struct slgt_info *info) -{ - unsigned short status = rd_reg16(info, SSR); - - /* clear all serial signals except DTR and RTS */ - info->signals &= SerialSignal_DTR + SerialSignal_RTS; - - if (status & BIT3) - info->signals |= SerialSignal_DSR; - if (status & BIT2) - info->signals |= SerialSignal_CTS; - if (status & BIT1) - info->signals |= SerialSignal_DCD; - if (status & BIT0) - info->signals |= SerialSignal_RI; -} - -/* - * set V.24 Control Register based on current configuration - */ -static void msc_set_vcr(struct slgt_info *info) -{ - unsigned char val = 0; - - /* VCR (V.24 control) - * - * 07..04 serial IF select - * 03 DTR - * 02 RTS - * 01 LL - * 00 RL - */ - - switch(info->if_mode & MGSL_INTERFACE_MASK) - { - case MGSL_INTERFACE_RS232: - val |= BIT5; /* 0010 */ - break; - case MGSL_INTERFACE_V35: - val |= BIT7 + BIT6 + BIT5; /* 1110 */ - break; - case MGSL_INTERFACE_RS422: - val |= BIT6; /* 0100 */ - break; - } - - if (info->if_mode & MGSL_INTERFACE_MSB_FIRST) - val |= BIT4; - if (info->signals & SerialSignal_DTR) - val |= BIT3; - if (info->signals & SerialSignal_RTS) - val |= BIT2; - if (info->if_mode & MGSL_INTERFACE_LL) - val |= BIT1; - if (info->if_mode & MGSL_INTERFACE_RL) - val |= BIT0; - wr_reg8(info, VCR, val); -} - -/* - * set state of V24 control (output) signals - */ -static void set_signals(struct slgt_info *info) -{ - unsigned char val = rd_reg8(info, VCR); - if (info->signals & SerialSignal_DTR) - val |= BIT3; - else - val &= ~BIT3; - if (info->signals & SerialSignal_RTS) - val |= BIT2; - else - val &= ~BIT2; - wr_reg8(info, VCR, val); -} - -/* - * free range of receive DMA buffers (i to last) - */ -static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last) -{ - int done = 0; - - while(!done) { - /* reset current buffer for reuse */ - info->rbufs[i].status = 0; - set_desc_count(info->rbufs[i], info->rbuf_fill_level); - if (i == last) - done = 1; - if (++i == info->rbuf_count) - i = 0; - } - info->rbuf_current = i; -} - -/* - * mark all receive DMA buffers as free - */ -static void reset_rbufs(struct slgt_info *info) -{ - free_rbufs(info, 0, info->rbuf_count - 1); - info->rbuf_fill_index = 0; - info->rbuf_fill_count = 0; -} - -/* - * pass receive HDLC frame to upper layer - * - * return true if frame available, otherwise false - */ -static bool rx_get_frame(struct slgt_info *info) -{ - unsigned int start, end; - unsigned short status; - unsigned int framesize = 0; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - unsigned char addr_field = 0xff; - unsigned int crc_size = 0; - - switch (info->params.crc_type & HDLC_CRC_MASK) { - case HDLC_CRC_16_CCITT: crc_size = 2; break; - case HDLC_CRC_32_CCITT: crc_size = 4; break; - } - -check_again: - - framesize = 0; - addr_field = 0xff; - start = end = info->rbuf_current; - - for (;;) { - if (!desc_complete(info->rbufs[end])) - goto cleanup; - - if (framesize == 0 && info->params.addr_filter != 0xff) - addr_field = info->rbufs[end].buf[0]; - - framesize += desc_count(info->rbufs[end]); - - if (desc_eof(info->rbufs[end])) - break; - - if (++end == info->rbuf_count) - end = 0; - - if (end == info->rbuf_current) { - if (info->rx_enabled){ - spin_lock_irqsave(&info->lock,flags); - rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - goto cleanup; - } - } - - /* status - * - * 15 buffer complete - * 14..06 reserved - * 05..04 residue - * 02 eof (end of frame) - * 01 CRC error - * 00 abort - */ - status = desc_status(info->rbufs[end]); - - /* ignore CRC bit if not using CRC (bit is undefined) */ - if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE) - status &= ~BIT1; - - if (framesize == 0 || - (addr_field != 0xff && addr_field != info->params.addr_filter)) { - free_rbufs(info, start, end); - goto check_again; - } - - if (framesize < (2 + crc_size) || status & BIT0) { - info->icount.rxshort++; - framesize = 0; - } else if (status & BIT1) { - info->icount.rxcrc++; - if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) - framesize = 0; - } - -#if SYNCLINK_GENERIC_HDLC - if (framesize == 0) { - info->netdev->stats.rx_errors++; - info->netdev->stats.rx_frame_errors++; - } -#endif - - DBGBH(("%s rx frame status=%04X size=%d\n", - info->device_name, status, framesize)); - DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx"); - - if (framesize) { - if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) { - framesize -= crc_size; - crc_size = 0; - } - - if (framesize > info->max_frame_size + crc_size) - info->icount.rxlong++; - else { - /* copy dma buffer(s) to contiguous temp buffer */ - int copy_count = framesize; - int i = start; - unsigned char *p = info->tmp_rbuf; - info->tmp_rbuf_count = framesize; - - info->icount.rxok++; - - while(copy_count) { - int partial_count = min_t(int, copy_count, info->rbuf_fill_level); - memcpy(p, info->rbufs[i].buf, partial_count); - p += partial_count; - copy_count -= partial_count; - if (++i == info->rbuf_count) - i = 0; - } - - if (info->params.crc_type & HDLC_CRC_RETURN_EX) { - *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK; - framesize++; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_rx(info,info->tmp_rbuf, framesize); - else -#endif - ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize); - } - } - free_rbufs(info, start, end); - return true; - -cleanup: - return false; -} - -/* - * pass receive buffer (RAW synchronous mode) to tty layer - * return true if buffer available, otherwise false - */ -static bool rx_get_buf(struct slgt_info *info) -{ - unsigned int i = info->rbuf_current; - unsigned int count; - - if (!desc_complete(info->rbufs[i])) - return false; - count = desc_count(info->rbufs[i]); - switch(info->params.mode) { - case MGSL_MODE_MONOSYNC: - case MGSL_MODE_BISYNC: - case MGSL_MODE_XSYNC: - /* ignore residue in byte synchronous modes */ - if (desc_residue(info->rbufs[i])) - count--; - break; - } - DBGDATA(info, info->rbufs[i].buf, count, "rx"); - DBGINFO(("rx_get_buf size=%d\n", count)); - if (count) - ldisc_receive_buf(info->port.tty, info->rbufs[i].buf, - info->flag_buf, count); - free_rbufs(info, i, i); - return true; -} - -static void reset_tbufs(struct slgt_info *info) -{ - unsigned int i; - info->tbuf_current = 0; - for (i=0 ; i < info->tbuf_count ; i++) { - info->tbufs[i].status = 0; - info->tbufs[i].count = 0; - } -} - -/* - * return number of free transmit DMA buffers - */ -static unsigned int free_tbuf_count(struct slgt_info *info) -{ - unsigned int count = 0; - unsigned int i = info->tbuf_current; - - do - { - if (desc_count(info->tbufs[i])) - break; /* buffer in use */ - ++count; - if (++i == info->tbuf_count) - i=0; - } while (i != info->tbuf_current); - - /* if tx DMA active, last zero count buffer is in use */ - if (count && (rd_reg32(info, TDCSR) & BIT0)) - --count; - - return count; -} - -/* - * return number of bytes in unsent transmit DMA buffers - * and the serial controller tx FIFO - */ -static unsigned int tbuf_bytes(struct slgt_info *info) -{ - unsigned int total_count = 0; - unsigned int i = info->tbuf_current; - unsigned int reg_value; - unsigned int count; - unsigned int active_buf_count = 0; - - /* - * Add descriptor counts for all tx DMA buffers. - * If count is zero (cleared by DMA controller after read), - * the buffer is complete or is actively being read from. - * - * Record buf_count of last buffer with zero count starting - * from current ring position. buf_count is mirror - * copy of count and is not cleared by serial controller. - * If DMA controller is active, that buffer is actively - * being read so add to total. - */ - do { - count = desc_count(info->tbufs[i]); - if (count) - total_count += count; - else if (!total_count) - active_buf_count = info->tbufs[i].buf_count; - if (++i == info->tbuf_count) - i = 0; - } while (i != info->tbuf_current); - - /* read tx DMA status register */ - reg_value = rd_reg32(info, TDCSR); - - /* if tx DMA active, last zero count buffer is in use */ - if (reg_value & BIT0) - total_count += active_buf_count; - - /* add tx FIFO count = reg_value[15..8] */ - total_count += (reg_value >> 8) & 0xff; - - /* if transmitter active add one byte for shift register */ - if (info->tx_active) - total_count++; - - return total_count; -} - -/* - * load data into transmit DMA buffer ring and start transmitter if needed - * return true if data accepted, otherwise false (buffers full) - */ -static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size) -{ - unsigned short count; - unsigned int i; - struct slgt_desc *d; - - /* check required buffer space */ - if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info)) - return false; - - DBGDATA(info, buf, size, "tx"); - - /* - * copy data to one or more DMA buffers in circular ring - * tbuf_start = first buffer for this data - * tbuf_current = next free buffer - * - * Copy all data before making data visible to DMA controller by - * setting descriptor count of the first buffer. - * This prevents an active DMA controller from reading the first DMA - * buffers of a frame and stopping before the final buffers are filled. - */ - - info->tbuf_start = i = info->tbuf_current; - - while (size) { - d = &info->tbufs[i]; - - count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size); - memcpy(d->buf, buf, count); - - size -= count; - buf += count; - - /* - * set EOF bit for last buffer of HDLC frame or - * for every buffer in raw mode - */ - if ((!size && info->params.mode == MGSL_MODE_HDLC) || - info->params.mode == MGSL_MODE_RAW) - set_desc_eof(*d, 1); - else - set_desc_eof(*d, 0); - - /* set descriptor count for all but first buffer */ - if (i != info->tbuf_start) - set_desc_count(*d, count); - d->buf_count = count; - - if (++i == info->tbuf_count) - i = 0; - } - - info->tbuf_current = i; - - /* set first buffer count to make new data visible to DMA controller */ - d = &info->tbufs[info->tbuf_start]; - set_desc_count(*d, d->buf_count); - - /* start transmitter if needed and update transmit timeout */ - if (!info->tx_active) - tx_start(info); - update_tx_timer(info); - - return true; -} - -static int register_test(struct slgt_info *info) -{ - static unsigned short patterns[] = - {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; - static unsigned int count = ARRAY_SIZE(patterns); - unsigned int i; - int rc = 0; - - for (i=0 ; i < count ; i++) { - wr_reg16(info, TIR, patterns[i]); - wr_reg16(info, BDR, patterns[(i+1)%count]); - if ((rd_reg16(info, TIR) != patterns[i]) || - (rd_reg16(info, BDR) != patterns[(i+1)%count])) { - rc = -ENODEV; - break; - } - } - info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0; - info->init_error = rc ? 0 : DiagStatus_AddressFailure; - return rc; -} - -static int irq_test(struct slgt_info *info) -{ - unsigned long timeout; - unsigned long flags; - struct tty_struct *oldtty = info->port.tty; - u32 speed = info->params.data_rate; - - info->params.data_rate = 921600; - info->port.tty = NULL; - - spin_lock_irqsave(&info->lock, flags); - async_mode(info); - slgt_irq_on(info, IRQ_TXIDLE); - - /* enable transmitter */ - wr_reg16(info, TCR, - (unsigned short)(rd_reg16(info, TCR) | BIT1)); - - /* write one byte and wait for tx idle */ - wr_reg16(info, TDR, 0); - - /* assume failure */ - info->init_error = DiagStatus_IrqFailure; - info->irq_occurred = false; - - spin_unlock_irqrestore(&info->lock, flags); - - timeout=100; - while(timeout-- && !info->irq_occurred) - msleep_interruptible(10); - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - spin_unlock_irqrestore(&info->lock,flags); - - info->params.data_rate = speed; - info->port.tty = oldtty; - - info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure; - return info->irq_occurred ? 0 : -ENODEV; -} - -static int loopback_test_rx(struct slgt_info *info) -{ - unsigned char *src, *dest; - int count; - - if (desc_complete(info->rbufs[0])) { - count = desc_count(info->rbufs[0]); - src = info->rbufs[0].buf; - dest = info->tmp_rbuf; - - for( ; count ; count-=2, src+=2) { - /* src=data byte (src+1)=status byte */ - if (!(*(src+1) & (BIT9 + BIT8))) { - *dest = *src; - dest++; - info->tmp_rbuf_count++; - } - } - DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx"); - return 1; - } - return 0; -} - -static int loopback_test(struct slgt_info *info) -{ -#define TESTFRAMESIZE 20 - - unsigned long timeout; - u16 count = TESTFRAMESIZE; - unsigned char buf[TESTFRAMESIZE]; - int rc = -ENODEV; - unsigned long flags; - - struct tty_struct *oldtty = info->port.tty; - MGSL_PARAMS params; - - memcpy(¶ms, &info->params, sizeof(params)); - - info->params.mode = MGSL_MODE_ASYNC; - info->params.data_rate = 921600; - info->params.loopback = 1; - info->port.tty = NULL; - - /* build and send transmit frame */ - for (count = 0; count < TESTFRAMESIZE; ++count) - buf[count] = (unsigned char)count; - - info->tmp_rbuf_count = 0; - memset(info->tmp_rbuf, 0, TESTFRAMESIZE); - - /* program hardware for HDLC and enabled receiver */ - spin_lock_irqsave(&info->lock,flags); - async_mode(info); - rx_start(info); - tx_load(info, buf, count); - spin_unlock_irqrestore(&info->lock, flags); - - /* wait for receive complete */ - for (timeout = 100; timeout; --timeout) { - msleep_interruptible(10); - if (loopback_test_rx(info)) { - rc = 0; - break; - } - } - - /* verify received frame length and contents */ - if (!rc && (info->tmp_rbuf_count != count || - memcmp(buf, info->tmp_rbuf, count))) { - rc = -ENODEV; - } - - spin_lock_irqsave(&info->lock,flags); - reset_adapter(info); - spin_unlock_irqrestore(&info->lock,flags); - - memcpy(&info->params, ¶ms, sizeof(info->params)); - info->port.tty = oldtty; - - info->init_error = rc ? DiagStatus_DmaFailure : 0; - return rc; -} - -static int adapter_test(struct slgt_info *info) -{ - DBGINFO(("testing %s\n", info->device_name)); - if (register_test(info) < 0) { - printk("register test failure %s addr=%08X\n", - info->device_name, info->phys_reg_addr); - } else if (irq_test(info) < 0) { - printk("IRQ test failure %s IRQ=%d\n", - info->device_name, info->irq_level); - } else if (loopback_test(info) < 0) { - printk("loopback test failure %s\n", info->device_name); - } - return info->init_error; -} - -/* - * transmit timeout handler - */ -static void tx_timeout(unsigned long context) -{ - struct slgt_info *info = (struct slgt_info*)context; - unsigned long flags; - - DBGINFO(("%s tx_timeout\n", info->device_name)); - if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { - info->icount.txtimeout++; - } - spin_lock_irqsave(&info->lock,flags); - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - bh_transmit(info); -} - -/* - * receive buffer polling timer - */ -static void rx_timeout(unsigned long context) -{ - struct slgt_info *info = (struct slgt_info*)context; - unsigned long flags; - - DBGINFO(("%s rx_timeout\n", info->device_name)); - spin_lock_irqsave(&info->lock, flags); - info->pending_bh |= BH_RECEIVE; - spin_unlock_irqrestore(&info->lock, flags); - bh_handler(&info->task); -} - |
