diff options
Diffstat (limited to 'drivers/char/serial167.c')
| -rw-r--r-- | drivers/char/serial167.c | 2858 |
1 files changed, 2858 insertions, 0 deletions
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c new file mode 100644 index 0000000..c2deac9 --- /dev/null +++ b/drivers/char/serial167.c @@ -0,0 +1,2858 @@ +/* + * linux/drivers/char/serial167.c + * + * Driver for MVME166/7 board serial ports, which are via a CD2401. + * Based very much on cyclades.c. + * + * MVME166/7 work by Richard Hirst [richard@sleepie.demon.co.uk] + * + * ============================================================== + * + * static char rcsid[] = + * "$Revision: 1.36.1.4 $$Date: 1995/03/29 06:14:14 $"; + * + * linux/kernel/cyclades.c + * + * Maintained by Marcio Saito (cyclades@netcom.com) and + * Randolph Bentson (bentson@grieg.seaslug.org) + * + * Much of the design and some of the code came from serial.c + * which was copyright (C) 1991, 1992 Linus Torvalds. It was + * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, + * and then fixed as suggested by Michael K. Johnson 12/12/92. + * + * This version does not support shared irq's. + * + * $Log: cyclades.c,v $ + * Revision 1.36.1.4 1995/03/29 06:14:14 bentson + * disambiguate between Cyclom-16Y and Cyclom-32Ye; + * + * Changes: + * + * 200 lines of changes record removed - RGH 11-10-95, starting work on + * converting this to drive serial ports on mvme166 (cd2401). + * + * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/08/25 + * - get rid of verify_area + * - use get_user to access memory from userspace in set_threshold, + * set_default_threshold and set_timeout + * - don't use the panic function in serial167_init + * - do resource release on failure on serial167_init + * - include missing restore_flags in mvme167_serial_console_setup + * + * Kars de Jong <jongk@linux-m68k.org> - 2004/09/06 + * - replace bottom half handler with task queue handler + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/tty.h> +#include <linux/interrupt.h> +#include <linux/serial.h> +#include <linux/serialP.h> +#include <linux/string.h> +#include <linux/fcntl.h> +#include <linux/ptrace.h> +#include <linux/serial167.h> +#include <linux/delay.h> +#include <linux/major.h> +#include <linux/mm.h> +#include <linux/console.h> +#include <linux/module.h> +#include <linux/bitops.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/mvme16xhw.h> +#include <asm/bootinfo.h> +#include <asm/setup.h> + +#include <linux/types.h> +#include <linux/kernel.h> + +#include <asm/uaccess.h> +#include <linux/init.h> + +#define SERIAL_PARANOIA_CHECK +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_THROTTLE +#undef SERIAL_DEBUG_OTHER +#undef SERIAL_DEBUG_IO +#undef SERIAL_DEBUG_COUNT +#undef SERIAL_DEBUG_DTR +#undef CYCLOM_16Y_HACK +#define CYCLOM_ENABLE_MONITORING + +#define WAKEUP_CHARS 256 + +#define STD_COM_FLAGS (0) + +#define SERIAL_TYPE_NORMAL 1 + +static struct tty_driver *cy_serial_driver; +extern int serial_console; +static struct cyclades_port *serial_console_info = NULL; +static unsigned int serial_console_cflag = 0; +u_char initial_console_speed; + +/* Base address of cd2401 chip on mvme166/7 */ + +#define BASE_ADDR (0xfff45000) +#define pcc2chip ((volatile u_char *)0xfff42000) +#define PccSCCMICR 0x1d +#define PccSCCTICR 0x1e +#define PccSCCRICR 0x1f +#define PccTPIACKR 0x25 +#define PccRPIACKR 0x27 +#define PccIMLR 0x3f + +/* This is the per-port data structure */ +struct cyclades_port cy_port[] = { + /* CARD# */ + {-1 }, /* ttyS0 */ + {-1 }, /* ttyS1 */ + {-1 }, /* ttyS2 */ + {-1 }, /* ttyS3 */ +}; +#define NR_PORTS (sizeof(cy_port)/sizeof(struct cyclades_port)) + +/* + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the copy_from_user blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static unsigned char *tmp_buf = 0; +DECLARE_MUTEX(tmp_buf_sem); + +/* + * This is used to look up the divisor speeds and the timeouts + * We're normally limited to 15 distinct baud rates. The extra + * are accessed via settings in info->flags. + * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, + * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, + * HI VHI + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, + 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800,115200,150000, + 0}; + +#if 0 +static char baud_co[] = { /* 25 MHz clock option table */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, + 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + +static char baud_bpr[] = { /* 25 MHz baud rate period table */ + 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, + 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15}; +#endif + +/* I think 166 brd clocks 2401 at 20MHz.... */ + +/* These values are written directly to tcor, and >> 5 for writing to rcor */ +static u_char baud_co[] = { /* 20 MHz clock option table */ + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40, + 0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + +/* These values written directly to tbpr/rbpr */ +static u_char baud_bpr[] = { /* 20 MHz baud rate period table */ + 0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81, + 0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10}; + +static u_char baud_cor4[] = { /* receive threshold */ + 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07}; + + + +static void shutdown(struct cyclades_port *); +static int startup (struct cyclades_port *); +static void cy_throttle(struct tty_struct *); +static void cy_unthrottle(struct tty_struct *); +static void config_setup(struct cyclades_port *); +extern void console_print(const char *); +#ifdef CYCLOM_SHOW_STATUS +static void show_status(int); +#endif + +#ifdef CONFIG_REMOTE_DEBUG +static void debug_setup(void); +void queueDebugChar (int c); +int getDebugChar(void); + +#define DEBUG_PORT 1 +#define DEBUG_LEN 256 + +typedef struct { + int in; + int out; + unsigned char buf[DEBUG_LEN]; +} debugq; + +debugq debugiq; +#endif + +/* + * I have my own version of udelay(), as it is needed when initialising + * the chip, before the delay loop has been calibrated. Should probably + * reference one of the vmechip2 or pccchip2 counter for an accurate + * delay, but this wild guess will do for now. + */ + +void my_udelay (long us) +{ + u_char x; + volatile u_char *p = &x; + int i; + + while (us--) + for (i = 100; i; i--) + x |= *p; +} + +static inline int +serial_paranoia_check(struct cyclades_port *info, char *name, + const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null cyclades_port for (%s) in %s\n"; + static const char *badrange = + "Warning: cyclades_port out of range for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + + if( (long)info < (long)(&cy_port[0]) + || (long)(&cy_port[NR_PORTS]) < (long)info ){ + printk(badrange, name, routine); + return 1; + } + + if (info->magic != CYCLADES_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} /* serial_paranoia_check */ + +#if 0 +/* The following diagnostic routines allow the driver to spew + information on the screen, even (especially!) during interrupts. + */ +void +SP(char *data){ + unsigned long flags; + local_irq_save(flags); + console_print(data); + local_irq_restore(flags); +} +char scrn[2]; +void +CP(char data){ + unsigned long flags; + local_irq_save(flags); + scrn[0] = data; + console_print(scrn); + local_irq_restore(flags); +}/* CP */ + +void CP1(int data) { (data<10)? CP(data+'0'): CP(data+'A'-10); }/* CP1 */ +void CP2(int data) { CP1((data>>4) & 0x0f); CP1( data & 0x0f); }/* CP2 */ +void CP4(int data) { CP2((data>>8) & 0xff); CP2(data & 0xff); }/* CP4 */ +void CP8(long data) { CP4((data>>16) & 0xffff); CP4(data & 0xffff); }/* CP8 */ +#endif + +/* This routine waits up to 1000 micro-seconds for the previous + command to the Cirrus chip to complete and then issues the + new command. An error is returned if the previous command + didn't finish within the time limit. + */ +u_short +write_cy_cmd(volatile u_char *base_addr, u_char cmd) +{ + unsigned long flags; + volatile int i; + + local_irq_save(flags); + /* Check to see that the previous command has completed */ + for(i = 0 ; i < 100 ; i++){ + if (base_addr[CyCCR] == 0){ + break; + } + my_udelay(10L); + } + /* if the CCR never cleared, the previous command + didn't finish within the "reasonable time" */ + if ( i == 10 ) { + local_irq_restore(flags); + return (-1); + } + + /* Issue the new command */ + base_addr[CyCCR] = cmd; + local_irq_restore(flags); + return(0); +} /* write_cy_cmd */ + + +/* cy_start and cy_stop provide software output flow control as a + function of XON/XOFF, software CTS, and other such stuff. */ + +static void +cy_stop(struct tty_struct *tty) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + unsigned long flags; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_stop %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_stop")) + return; + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char)(channel); /* index channel */ + base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); + local_irq_restore(flags); + + return; +} /* cy_stop */ + +static void +cy_start(struct tty_struct *tty) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + unsigned long flags; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_start %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_start")) + return; + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char)(channel); + base_addr[CyIER] |= CyTxMpty; + local_irq_restore(flags); + + return; +} /* cy_start */ + + +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver + * (also known as the "bottom half"). This can be called any + * number of times for any channel without harm. + */ +static inline void +cy_sched_event(struct cyclades_port *info, int event) +{ + info->event |= 1 << event; /* remember what kind of event and who */ + schedule_work(&info->tqueue); +} /* cy_sched_event */ + + +/* The real interrupt service routines are called + whenever the card wants its hand held--chars + received, out buffer empty, modem change, etc. + */ +static irqreturn_t +cd2401_rxerr_interrupt(int irq, void *dev_id, struct pt_regs *fp) +{ + struct tty_struct *tty; + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + unsigned char err, rfoc; + int channel; + char data; + + /* determine the channel and change to that context */ + channel = (u_short ) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + + if ((err = base_addr[CyRISR]) & CyTIMEOUT) { + /* This is a receive timeout interrupt, ignore it */ + base_addr[CyREOIR] = CyNOTRANS; + return IRQ_HANDLED; + } + + /* Read a byte of data if there is any - assume the error + * is associated with this character */ + + if ((rfoc = base_addr[CyRFOC]) != 0) + data = base_addr[CyRDR]; + else + data = 0; + + /* if there is nowhere to put the data, discard it */ + if(info->tty == 0) { + base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; + return IRQ_HANDLED; + } + else { /* there is an open port for this data */ + tty = info->tty; + if(err & info->ignore_status_mask){ + base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; + return IRQ_HANDLED; + } + if (tty->flip.count < TTY_FLIPBUF_SIZE){ + tty->flip.count++; + if (err & info->read_status_mask){ + if(err & CyBREAK){ + *tty->flip.flag_buf_ptr++ = TTY_BREAK; + *tty->flip.char_buf_ptr++ = data; + if (info->flags & ASYNC_SAK){ + do_SAK(tty); + } + }else if(err & CyFRAME){ + *tty->flip.flag_buf_ptr++ = TTY_FRAME; + *tty->flip.char_buf_ptr++ = data; + }else if(err & CyPARITY){ + *tty->flip.flag_buf_ptr++ = TTY_PARITY; + *tty->flip.char_buf_ptr++ = data; + }else if(err & CyOVERRUN){ + *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; + *tty->flip.char_buf_ptr++ = 0; + /* + If the flip buffer itself is + overflowing, we still loose + the next incoming character. + */ + if(tty->flip.count < TTY_FLIPBUF_SIZE){ + tty->flip.count++; + *tty->flip.flag_buf_ptr++ = TTY_NORMAL; + *tty->flip.char_buf_ptr++ = data; + } + /* These two conditions may imply */ + /* a normal read should be done. */ + /* else if(data & CyTIMEOUT) */ + /* else if(data & CySPECHAR) */ + }else{ + *tty->flip.flag_buf_ptr++ = 0; + *tty->flip.char_buf_ptr++ = 0; + } + }else{ + *tty->flip.flag_buf_ptr++ = 0; + *tty->flip.char_buf_ptr++ = 0; + } + }else{ + /* there was a software buffer overrun + and nothing could be done about it!!! */ + } + } + schedule_delayed_work(&tty->flip.work, 1); + /* end of service */ + base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; + return IRQ_HANDLED; +} /* cy_rxerr_interrupt */ + +static irqreturn_t +cd2401_modem_interrupt(int irq, void *dev_id, struct pt_regs *fp) +{ + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + int mdm_change; + int mdm_status; + + + /* determine the channel and change to that context */ + channel = (u_short ) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + + mdm_change = base_addr[CyMISR]; + mdm_status = base_addr[CyMSVR1]; + + if(info->tty == 0){ /* nowhere to put the data, ignore it */ + ; + }else{ + if((mdm_change & CyDCD) + && (info->flags & ASYNC_CHECK_CD)){ + if(mdm_status & CyDCD){ +/* CP('!'); */ + cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP); + } else { +/* CP('@'); */ + cy_sched_event(info, Cy_EVENT_HANGUP); + } + } + if((mdm_change & CyCTS) + && (info->flags & ASYNC_CTS_FLOW)){ + if(info->tty->stopped){ + if(mdm_status & CyCTS){ + /* !!! cy_start isn't used because... */ + info->tty->stopped = 0; + base_addr[CyIER] |= CyTxMpty; + cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); + } + }else{ + if(!(mdm_status & CyCTS)){ + /* !!! cy_stop isn't used because... */ + info->tty->stopped = 1; + base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); + } + } + } + if(mdm_status & CyDSR){ + } + } + base_addr[CyMEOIR] = 0; + return IRQ_HANDLED; +} /* cy_modem_interrupt */ + +static irqreturn_t +cd2401_tx_interrupt(int irq, void *dev_id, struct pt_regs *fp) +{ + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + int char_count, saved_cnt; + int outch; + + /* determine the channel and change to that context */ + channel = (u_short ) (base_addr[CyLICR] >> 2); + +#ifdef CONFIG_REMOTE_DEBUG + if (channel == DEBUG_PORT) { + panic ("TxInt on debug port!!!"); + } +#endif + + info = &cy_port[channel]; + + /* validate the port number (as configured and open) */ + if( (channel < 0) || (NR_PORTS <= channel) ){ + base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); + base_addr[CyTEOIR] = CyNOTRANS; + return IRQ_HANDLED; + } + info->last_active = jiffies; + if(info->tty == 0){ + base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); + if (info->xmit_cnt < WAKEUP_CHARS) { + cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); + } + base_addr[CyTEOIR] = CyNOTRANS; + return IRQ_HANDLED; + } + + /* load the on-chip space available for outbound data */ + saved_cnt = char_count = base_addr[CyTFTC]; + + if(info->x_char) { /* send special char */ + outch = info->x_char; + base_addr[CyTDR] = outch; + char_count--; + info->x_char = 0; + } + + if (info->x_break){ + /* The Cirrus chip requires the "Embedded Transmit + Commands" of start break, delay, and end break + sequences to be sent. The duration of the + break is given in TICs, which runs at HZ + (typically 100) and the PPR runs at 200 Hz, + so the delay is duration * 200/HZ, and thus a + break can run from 1/100 sec to about 5/4 sec. + Need to check these values - RGH 141095. + */ + base_addr[CyTDR] = 0; /* start break */ + base_addr[CyTDR] = 0x81; + base_addr[CyTDR] = 0; /* delay a bit */ + base_addr[CyTDR] = 0x82; + base_addr[CyTDR] = info->x_break*200/HZ; + base_addr[CyTDR] = 0; /* terminate break */ + base_addr[CyTDR] = 0x83; + char_count -= 7; + info->x_break = 0; + } + + while (char_count > 0){ + if (!info->xmit_cnt){ + base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); + break; + } + if (info->xmit_buf == 0){ + base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); + break; + } + if (info->tty->stopped || info->tty->hw_stopped){ + base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); + break; + } + /* Because the Embedded Transmit Commands have been + enabled, we must check to see if the escape + character, NULL, is being sent. If it is, we + must ensure that there is room for it to be + doubled in the output stream. Therefore we + no longer advance the pointer when the character + is fetched, but rather wait until after the check + for a NULL output character. (This is necessary + because there may not be room for the two chars + needed to send a NULL. + */ + outch = info->xmit_buf[info->xmit_tail]; + if( outch ){ + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) + & (PAGE_SIZE - 1); + base_addr[CyTDR] = outch; + char_count--; + }else{ + if(char_count > 1){ + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) + & (PAGE_SIZE - 1); + base_addr[CyTDR] = outch; + base_addr[CyTDR] = 0; + char_count--; + char_count--; + }else{ + break; + } + } + } + + if (info->xmit_cnt < WAKEUP_CHARS) { + cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); + } + base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS; + return IRQ_HANDLED; +} /* cy_tx_interrupt */ + +static irqreturn_t +cd2401_rx_interrupt(int irq, void *dev_id, struct pt_regs *fp) +{ + struct tty_struct *tty; + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + char data; + int char_count; + int save_cnt; + + /* determine the channel and change to that context */ + channel = (u_short ) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + save_cnt = char_count = base_addr[CyRFOC]; + +#ifdef CONFIG_REMOTE_DEBUG + if (channel == DEBUG_PORT) { + while (char_count--) { + data = base_addr[CyRDR]; + queueDebugChar(data); + } + } + else +#endif + /* if there is nowhere to put the data, discard it */ + if(info->tty == 0){ + while(char_count--){ + data = base_addr[CyRDR]; + } + }else{ /* there is an open port for this data */ + tty = info->tty; + /* load # characters available from the chip */ + +#ifdef CYCLOM_ENABLE_MONITORING + ++info->mon.int_count; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; +#endif + while(char_count--){ + data = base_addr[CyRDR]; + if (tty->flip.count >= TTY_FLIPBUF_SIZE){ + continue; + } + tty->flip.count++; + *tty->flip.flag_buf_ptr++ = TTY_NORMAL; + *tty->flip.char_buf_ptr++ = data; +#ifdef CYCLOM_16Y_HACK + udelay(10L); +#endif + } + schedule_delayed_work(&tty->flip.work, 1); + } + /* end of service */ + base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS; + return IRQ_HANDLED; +} /* cy_rx_interrupt */ + +/* + * This routine is used to handle the "bottom half" processing for the + * serial driver, known also the "software interrupt" processing. + * This processing is done at the kernel interrupt level, after the + * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This + * is where time-consuming activities which can not be done in the + * interrupt driver proper are done; the interrupt driver schedules + * them using cy_sched_event(), and they get done here. + * + * This is done through one level of indirection--the task queue. + * When a hardware interrupt service routine wants service by the + * driver's bottom half, it enqueues the appropriate tq_struct (one + * per port) to the keventd work queue and sets a request flag + * that the work queue be processed. + * + * Although this may seem unwieldy, it gives the system a way to + * pass an argument (in this case the pointer to the cyclades_port + * structure) to the bottom half of the driver. Previous kernels + * had to poll every port to see if that port needed servicing. + */ +static void +do_softint(void *private_) +{ + struct cyclades_port *info = (struct cyclades_port *) private_; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { + tty_hangup(info->tty); + wake_up_interruptible(&info->open_wait); + info->flags &= ~ASYNC_NORMAL_ACTIVE; + } + if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { + wake_up_interruptible(&info->open_wait); + } + if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { + tty_wakeup(tty); + } +} /* do_softint */ + + +/* This is called whenever a port becomes active; + interrupts are enabled and DTR & RTS are turned on. + */ +static int +startup(struct cyclades_port * info) +{ + unsigned long flags; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + + if (info->flags & ASYNC_INITIALIZED){ + return 0; + } + + if (!info->type){ + if (info->tty){ + set_bit(TTY_IO_ERROR, &info->tty->flags); + } + return 0; + } + if (!info->xmit_buf){ + info->xmit_buf = (unsigned char *) get_zeroed_page (GFP_KERNEL); + if (!info->xmit_buf){ + return -ENOMEM; + } + } + + config_setup(info); + + channel = info->line; + +#ifdef SERIAL_DEBUG_OPEN + printk("startup channel %d\n", channel); +#endif + + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; + write_cy_cmd(base_addr,CyENB_RCVR|CyENB_XMTR); + + base_addr[CyCAR] = (u_char)channel; /* !!! Is this needed? */ + base_addr[CyMSVR1] = CyRTS; +/* CP('S');CP('1'); */ + base_addr[CyMSVR2] = CyDTR; + +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); +#endif + + base_addr[CyIER] |= CyRxData; + info->flags |= ASYNC_INITIALIZED; + + if (info->tty){ + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + local_irq_restore(flags); + +#ifdef SERIAL_DEBUG_OPEN + printk(" done\n"); +#endif + return 0; +} /* startup */ + +void +start_xmit( struct cyclades_port *info ) +{ + unsigned long flags; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + + channel = info->line; + local_irq_save(flags); + base_addr[CyCAR] = channel; + base_addr[CyIER] |= CyTxMpty; + local_irq_restore(flags); +} /* start_xmit */ + +/* + * This routine shuts down a serial port; interrupts are disabled, + * and DTR is dropped if the hangup on close termio flag is on. + */ +static void +shutdown(struct cyclades_port * info) +{ + unsigned long flags; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + + if (!(info->flags & ASYNC_INITIALIZED)){ +/* CP('$'); */ + return; + } + + channel = info->line; + +#ifdef SERIAL_DEBUG_OPEN + printk("shutdown channel %d\n", channel); +#endif + + /* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE + SENT BEFORE DROPPING THE LINE !!! (Perhaps + set some flag that is read when XMTY happens.) + Other choices are to delay some fixed interval + or schedule some later processing. + */ + local_irq_save(flags); + if (info->xmit_buf){ + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = 0; + } + + base_addr[CyCAR] = (u_char)channel; + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { + base_addr[CyMSVR1] = 0; +/* CP('C');CP('1'); */ + base_addr[CyMSVR2] = 0; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); +#endif + } + write_cy_cmd(base_addr,CyDIS_RCVR); + /* it may be appropriate to clear _XMIT at + some later date (after testing)!!! */ + + if (info->tty){ + set_bit(TTY_IO_ERROR, &info->tty->flags); + } + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); + +#ifdef SERIAL_DEBUG_OPEN + printk(" done\n"); +#endif + return; +} /* shutdown */ + +/* + * This routine finds or computes the various line characteristics. + */ +static void +config_setup(struct cyclades_port * info) +{ + unsigned long flags; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + unsigned cflag; + int i; + unsigned char ti, need_init_chan = 0; + + if (!info->tty || !info->tty->termios){ + return; + } + if (info->line == -1){ + return; + } + cflag = info->tty->termios->c_cflag; + + /* baud rate */ + i = cflag & CBAUD; +#ifdef CBAUDEX +/* Starting with kernel 1.1.65, there is direct support for + higher baud rates. The following code supports those + changes. The conditional aspect allows this driver to be + used for earlier as well as later kernel versions. (The + mapping is slightly different from serial.c because there + is still the possibility of supporting 75 kbit/sec with + the Cyclades board.) + */ + if (i & CBAUDEX) { + if (i == B57600) + i = 16; + else if(i == B115200) + i = 18; +#ifdef B78600 + else if(i == B78600) + i = 17; +#endif + else + info->tty->termios->c_cflag &= ~CBAUDEX; + } +#endif + if (i == 15) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + i += 1; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + i += 3; + } + /* Don't ever change the speed of the console port. It will + * run at the speed specified in bootinfo, or at 19.2K */ + /* Actually, it should run at whatever speed 166Bug was using */ + /* Note info->timeout isn't used at present */ + if (info != serial_console_info) { + info->tbpr = baud_bpr[i]; /* Tx BPR */ + info->tco = baud_co[i]; /* Tx CO */ + info->rbpr = baud_bpr[i]; /* Rx BPR */ + info->rco = baud_co[i] >> 5; /* Rx CO */ + if (baud_table[i] == 134) { + info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2; + /* get it right for 134.5 baud */ + } else if (baud_table[i]) { + info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } + } + /* By tradition (is it a standard?) a baud rate of zero + implies the line should be/has been closed. A bit + later in this routine such a test is performed. */ + + /* byte size and parity */ + info->cor7 = 0; + info->cor6 = 0; + info->cor5 = 0; + info->cor4 = (info->default_threshold + ? info->default_threshold + : baud_cor4[i]); /* receive threshold */ + /* Following two lines added 101295, RGH. */ + /* It is obviously wrong to access CyCORx, and not info->corx here, + * try and remember to fix it later! */ + channel = info->line; + base_addr[CyCAR] = (u_char)channel; + if (C_CLOCAL(info->tty)) { + if (base_addr[CyIER] & CyMdmCh) + base_addr[CyIER] &= ~CyMdmCh; /* without modem intr */ + /* ignore 1->0 modem transitions */ + if (base_addr[CyCOR4] & (CyDSR|CyCTS|CyDCD)) + base_addr[CyCOR4] &= ~(CyDSR|CyCTS|CyDCD); + /* ignore 0->1 modem transitions */ + if (base_addr[CyCOR5] & (CyDSR|CyCTS|CyDCD)) + base_addr[CyCOR5] &= ~(CyDSR|CyCTS|CyDCD); + } else { + if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh) + base_addr[CyIER] |= CyMdmCh; /* with modem intr */ + /* act on 1->0 modem transitions */ + if ((base_addr[CyCOR4] & (CyDSR|CyCTS|CyDCD)) != (CyDSR|CyCTS|CyDCD)) + base_addr[CyCOR4] |= CyDSR|CyCTS|CyDCD; + /* act on 0->1 modem transitions */ + if ((base_addr[CyCOR5] & (CyDSR|CyCTS|CyDCD)) != (CyDSR|CyCTS|CyDCD)) + base_addr[CyCOR5] |= CyDSR|CyCTS|CyDCD; + } + info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP; + info->cor2 = CyETC; + switch(cflag & CSIZE){ + case CS5: + info->cor1 = Cy_5_BITS; + break; + case CS6: + info->cor1 = Cy_6_BITS; + break; + case CS7: + info->cor1 = Cy_7_BITS; + break; + case CS8: + info->cor1 = Cy_8_BITS; + break; + } + if (cflag & PARENB){ + if (cflag & PARODD){ + info->cor1 |= CyPARITY_O; + }else{ + info->cor1 |= CyPARITY_E; + } + }else{ + info->cor1 |= CyPARITY_NONE; + } + + /* CTS flow control flag */ +#if 0 + /* Don't complcate matters for now! RGH 141095 */ + if (cflag & CRTSCTS){ + info->flags |= ASYNC_CTS_FLOW; + info->cor2 |= CyCtsAE; + }else{ + info->flags &= ~ASYNC_CTS_FLOW; + info->cor2 &= ~CyCtsAE; + } +#endif + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; + + /*********************************************** + The hardware option, CyRtsAO, presents RTS when + the chip has characters to send. Since most modems + use RTS as reverse (inbound) flow control, this + option is not used. If inbound flow control is + necessary, DTR can be programmed to provide the + appropriate signals for use with a non-standard + cable. Contact Marcio Saito for details. + ***********************************************/ + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; + + /* CyCMR set once only in mvme167_init_serial() */ + if (base_addr[CyLICR] != channel << 2) + base_addr[CyLICR] = channel << 2; + if (base_addr[CyLIVR] != 0x5c) + base_addr[CyLIVR] = 0x5c; + + /* tx and rx baud rate */ + + if (base_addr[CyCOR1] != info->cor1) + need_init_chan = 1; + if (base_addr[CyTCOR] != info->tco) + base_addr[CyTCOR] = info->tco; + if (base_addr[CyTBPR] != info->tbpr) + base_addr[CyTBPR] = info->tbpr; + if (base_addr[CyRCOR] != info->rco) + base_addr[CyRCOR] = info->rco; + if (base_addr[CyRBPR] != info->rbpr) + base_addr[CyRBPR] = info->rbpr; + + /* set line characteristics according configuration */ + + if (base_addr[CySCHR1] != START_CHAR(info->tty)) + base_addr[CySCHR1] = START_CHAR(info->tty); + if (base_addr[CySCHR2] != STOP_CHAR(info->tty)) + base_addr[CySCHR2] = STOP_CHAR(info->tty); + if (base_addr[CySCRL] != START_CHAR(info->tty)) + base_addr[CySCRL] = START_CHAR(info->tty); + if (base_addr[CySCRH] != START_CHAR(info->tty)) + base_addr[CySCRH] = START_CHAR(info->tty); + if (base_addr[CyCOR1] != info->cor1) + base_addr[CyCOR1] = info->cor1; + if (base_addr[CyCOR2] != info->cor2) + base_addr[CyCOR2] = info->cor2; + if (base_addr[CyCOR3] != info->cor3) + base_addr[CyCOR3] = info->cor3; + if (base_addr[CyCOR4] != info->cor4) + base_addr[CyCOR4] = info->cor4; + if (base_addr[CyCOR5] != info->cor5) + base_addr[CyCOR5] = info->cor5; + if (base_addr[CyCOR6] != info->cor6) + base_addr[CyCOR6] = info->cor6; + if (base_addr[CyCOR7] != info->cor7) + base_addr[CyCOR7] = info->cor7; + + if (need_init_chan) + write_cy_cmd(base_addr,CyINIT_CHAN); + + base_addr[CyCAR] = (u_char)channel; /* !!! Is this needed? */ + + /* 2ms default rx timeout */ + ti = info->default_timeout ? info->default_timeout : 0x02; + if (base_addr[CyRTPRL] != ti) + base_addr[CyRTPRL] = ti; + if (base_addr[CyRTPRH] != 0) + base_addr[CyRTPRH] = 0; + + /* Set up RTS here also ????? RGH 141095 */ + if(i == 0){ /* baud rate is zero, turn off line */ + if ((base_addr[CyMSVR2] & CyDTR) == CyDTR) + base_addr[CyMSVR2] = 0; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); +#endif + }else{ + if ((base_addr[CyMSVR2] & CyDTR) != CyDTR) + base_addr[CyMSVR2] = CyDTR; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); +#endif + } + + if (info->tty){ + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + + local_irq_restore(flags); + +} /* config_setup */ + + +static void +cy_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + +#ifdef SERIAL_DEBUG_IO + printk("cy_put_char %s(0x%02x)\n", tty->name, ch); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_put_char")) + return; + + if (!tty || !info->xmit_buf) + return; + + local_irq_save(flags); + if (info->xmit_cnt >= PAGE_SIZE - 1) { + local_irq_restore(flags); + return; + } + + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= PAGE_SIZE - 1; + info->xmit_cnt++; + local_irq_restore(flags); +} /* cy_put_char */ + + +static void +cy_flush_chars(struct tty_struct *tty) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + +#ifdef SERIAL_DEBUG_IO + printk("cy_flush_chars %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) + return; + + if (info->xmit_cnt <= 0 || tty->stopped + || tty->hw_stopped || !info->xmit_buf) + return; + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = channel; + base_addr[CyIER] |= CyTxMpty; + local_irq_restore(flags); +} /* cy_flush_chars */ + + +/* This routine gets called when tty_write has put something into + the write_queue. If the port is not already transmitting stuff, + start it off by enabling interrupts. The interrupt service + routine will then ensure that the characters are sent. If the + port is already active, there is no need to kick it. + */ +static int +cy_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + int c, total = 0; + +#ifdef SERIAL_DEBUG_IO + printk("cy_write %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_write")){ + return 0; + } + + if (!tty || !info->xmit_buf || !tmp_buf){ + return 0; + } + + while (1) { + local_irq_save(flags); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) { + local_irq_restore(flags); + break; + } + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt += c; + local_irq_restore(flags); + + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt + && !tty->stopped + && !tty->hw_stopped ) { + start_xmit(info); + } + return total; +} /* cy_write */ + + +static int +cy_write_room(struct tty_struct *tty) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + int ret; + +#ifdef SERIAL_DEBUG_IO + printk("cy_write_room %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_write_room")) + return 0; + ret = PAGE_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} /* cy_write_room */ + + +static int +cy_chars_in_buffer(struct tty_struct *tty) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + +#ifdef SERIAL_DEBUG_IO + printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) + return 0; + + return info->xmit_cnt; +} /* cy_chars_in_buffer */ + + +static void +cy_flush_buffer(struct tty_struct *tty) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + +#ifdef SERIAL_DEBUG_IO + printk("cy_flush_buffer %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) + return; + local_irq_save(flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + local_irq_restore(flags); + tty_wakeup(tty); +} /* cy_flush_buffer */ + + +/* This routine is called by the upper-layer tty layer to signal + that incoming characters should be throttled or that the + throttle should be released. + */ +static void +cy_throttle(struct tty_struct * tty) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); + printk("cy_throttle %s\n", tty->name); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_nthrottle")){ + return; + } + + if (I_IXOFF(tty)) { + info->x_char = STOP_CHAR(tty); + /* Should use the "Send Special Character" feature!!! */ + } + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; + base_addr[CyMSVR1] = 0; + local_irq_restore(flags); + + return; +} /* cy_throttle */ + + +static void +cy_unthrottle(struct tty_struct * tty) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); + printk("cy_unthrottle %s\n", tty->name); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_nthrottle")){ + return; + } + + if (I_IXOFF(tty)) { + info->x_char = START_CHAR(tty); + /* Should use the "Send Special Character" feature!!! */ + } + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; + base_addr[CyMSVR1] = CyRTS; + local_irq_restore(flags); + + return; +} /* cy_unthrottle */ + +static int +get_serial_info(struct cyclades_port * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + +/* CP('g'); */ + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->line; + tmp.irq = 0; + tmp.flags = info->flags; + tmp.baud_base = 0; /*!!!*/ + tmp.close_delay = info->close_delay; + tmp.custom_divisor = 0; /*!!!*/ + tmp.hub6 = 0; /*!!!*/ + return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0; +} /* get_serial_info */ + +static int +set_serial_info(struct cyclades_port * info, + struct serial_struct * new_info) +{ + struct serial_struct new_serial; + struct cyclades_port old_info; + +/* CP('s'); */ + if (!new_info) + return -EFAULT; + if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != + (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + goto check_and_exit; + } + + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->close_delay = new_serial.close_delay; + + +check_and_exit: + if (info->flags & ASYNC_INITIALIZED){ + config_setup(info); + return 0; + }else{ + return startup(info); + } +} /* set_serial_info */ + +static int +cy_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; + int channel; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + unsigned long flags; + unsigned char status; + unsigned int result; + + channel = info->line; + + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; + status = base_addr[CyMSVR1] | base_addr[CyMSVR2]; + local_irq_restore(flags); + + return ((status & CyRTS) ? TIOCM_RTS : 0) + | ((status & CyDTR) ? TIOCM_DTR : 0) + | ((status & CyDCD) ? TIOCM_CAR : 0) + | ((status & CyDSR) ? TIOCM_DSR : 0) + | ((status & CyCTS) ? TIOCM_CTS : 0); +} /* cy_tiocmget */ + +static int +cy_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; + int channel; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + unsigned long flags; + unsigned int arg; + + channel = info->line; + + if (set & TIOCM_RTS){ + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; + base_addr[CyMSVR1] = CyRTS; + local_irq_restore(flags); + } + if (set & TIOCM_DTR){ + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; +/* CP('S');CP('2'); */ + base_addr[CyMSVR2] = CyDTR; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); +#endif + local_irq_restore(flags); + } + + if (clear & TIOCM_RTS){ + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; + base_addr[CyMSVR1] = 0; + local_irq_restore(flags); + } + if (clear & TIOCM_DTR){ + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; +/* CP('C');CP('2'); */ + base_addr[CyMSVR2] = 0; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); +#endif + local_irq_restore(flags); + } + + return 0; +} /* set_modem_info */ + +static void +send_break( struct cyclades_port * info, int duration) +{ /* Let the transmit ISR take care of this (since it + requires stuffing characters into the output stream). + */ + info->x_break = duration; + if (!info->xmit_cnt ) { + start_xmit(info); + } +} /* send_break */ + +static int +get_mon_info(struct cyclades_port * info, struct cyclades_monitor * mon) +{ + + if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) + return -EFAULT; + info->mon.int_count = 0; + info->mon.char_count = 0; + info->mon.char_max = 0; + info->mon.char_last = 0; + return 0; +} + +static int +set_threshold(struct cyclades_port * info, unsigned long *arg) +{ + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + unsigned long value; + int channel; + + if (get_user(value, arg)) + return -EFAULT; + + channel = info->line; + info->cor4 &= ~CyREC_FIFO; + info->cor4 |= value & CyREC_FIFO; + base_addr[CyCOR4] = info->cor4; + return 0; +} + +static int +get_threshold(struct cyclades_port * info, unsigned long *value) +{ + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + unsigned long tmp; + + channel = info->line; + + tmp = base_addr[CyCOR4] & CyREC_FIFO; + return put_user(tmp,value); +} + +static int +set_default_threshold(struct cyclades_port * info, unsigned long *arg) +{ + unsigned long value; + + if (get_user(value, arg)) + return -EFAULT; + + info->default_threshold = value & 0x0f; + return 0; +} + +static int +get_default_threshold(struct cyclades_port * info, unsigned long *value) +{ + return put_user(info->default_threshold,value); +} + +static int +set_timeout(struct cyclades_port * info, unsigned long *arg) +{ + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + unsigned long value; + + if (get_user(value, arg)) + return -EFAULT; + + channel = info->line; + + base_addr[CyRTPRL] = value & 0xff; + base_addr[CyRTPRH] = (value >> 8) & 0xff; + return 0; +} + +static int +get_timeout(struct cyclades_port * info, unsigned long *value) +{ + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + unsigned long tmp; + + channel = info->line; + + tmp = base_addr[CyRTPRL]; + return put_user(tmp,value); +} + +static int +set_default_timeout(struct cyclades_port * info, unsigned long value) +{ + info->default_timeout = value & 0xff; + return 0; +} + +static int +get_default_timeout(struct cyclades_port * info, unsigned long *value) +{ + return put_user(info->default_timeout,value); +} + +static int +cy_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + unsigned long val; + struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; + int ret_val = 0; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */ +#endif + + switch (cmd) { + case CYGETMON: + ret_val = get_mon_info(info, (struct cyclades_monitor *)arg); + break; + case CYGETTHRESH: + ret_val = get_threshold(info, (unsigned long *)arg); + break; + case CYSETTHRESH: + ret_val = set_threshold(info, (unsigned long *)arg); + break; + case CYGETDEFTHRESH: + ret_val = get_default_threshold(info, (unsigned long *)arg); + break; + case CYSETDEFTHRESH: + ret_val = set_default_threshold(info, (unsigned long *)arg); + break; + case CYGETTIMEOUT: + ret_val = get_timeout(info, (unsigned long *)arg); + break; + case CYSETTIMEOUT: + ret_val = set_timeout(info, (unsigned long *)arg); + break; + case CYGETDEFTIMEOUT: + ret_val = get_default_timeout(info, (unsigned long *)arg); + break; + case CYSETDEFTIMEOUT: + ret_val = set_default_timeout(info, (unsigned long)arg); + break; + case TCSBRK: /* SVID version: non-zero arg --> no break */ + ret_val = tty_check_change(tty); + if (ret_val) + break; + tty_wait_until_sent(tty,0); + if (!arg) + send_break(info, HZ/4); /* 1/4 second */ + break; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + ret_val = tty_check_change(tty); + if (ret_val) + break; + tty_wait_until_sent(tty,0); + send_break(info, arg ? arg*(HZ/10) : HZ/4); + break; + +/* The following commands are incompletely implemented!!! */ + case TIOCGSOFTCAR: + ret_val = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *) arg); + break; + case TIOCSSOFTCAR: + ret_val = get_user(val, (unsigned long *) arg); + if (ret_val) + break; + tty->termios->c_cflag = + ((tty->termios->c_cflag & ~CLOCAL) | (val ? CLOCAL : 0)); + break; + case TIOCGSERIAL: + ret_val = get_serial_info(info, (struct serial_struct *) arg); + break; + case TIOCSSERIAL: + ret_val = set_serial_info(info, + (struct serial_struct *) arg); + break; + default: + ret_val = -ENOIOCTLCMD; + } + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_ioctl done\n"); +#endif + + return ret_val; +} /* cy_ioctl */ + + + + +static void +cy_set_termios(struct tty_struct *tty, struct termios * old_termios) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_set_termios %s\n", tty->name); +#endif + + if (tty->termios->c_cflag == old_termios->c_cflag) + return; + config_setup(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->stopped = 0; + cy_start(tty); + } +#ifdef tytso_patch_94Nov25_1726 + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); +#endif + + return; +} /* cy_set_termios */ + + +static void +cy_close(struct tty_struct * tty, struct file * filp) +{ + struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; + +/* CP('C'); */ +#ifdef SERIAL_DEBUG_OTHER + printk("cy_close %s\n", tty->name); +#endif + + if (!info + || serial_paranoia_check(info, tty->name, "cy_close")){ + return; + } +#ifdef SERIAL_DEBUG_OPEN + printk("cy_close %s, count = %d\n", tty->name, info->count); +#endif + + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("cy_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count - 1); +#endif + if (--info->count < 0) { + printk("cy_close: bad serial port count for ttys%d: %d\n", + info->line, info->count); +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: setting count to 0\n", __LINE__); +#endif + info->count = 0; + } + if (info->count) + return; + info->flags |= ASYNC_CLOSING; + if (info->flags & ASYNC_INITIALIZED) + tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); + info->event = 0; + info->tty = 0; + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_close done\n"); +#endif + + return; +} /* cy_close */ + +/* + * cy_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void +cy_hangup(struct tty_struct *tty) +{ + struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; + +#ifdef SERIAL_DEBUG_OTHER + printk("cy_hangup %s\n", tty->name); /* */ +#endif + + if (serial_paranoia_check(info, tty->name, "cy_hangup")) + return; + + shutdown(info); +#if 0 + info->event = 0; + info->count = 0; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: setting count to 0\n", __LINE__); +#endif + info->tty = 0; +#endif + info->flags &= ~ASYNC_NORMAL_ACTIVE; + wake_up_interruptible(&info->open_wait); +} /* cy_hangup */ + + + +/* + * ------------------------------------------------------------ + * cy_open() and friends + * ------------------------------------------------------------ + */ + +static int +block_til_ready(struct tty_struct *tty, struct file * filp, + struct cyclades_port *info) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + int channel; + int retval; + volatile u_char *base_addr = (u_char *)BASE_ADDR; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&info->close_wait); + if (info->flags & ASYNC_HUP_NOTIFY){ + return -EAGAIN; + }else{ + return -ERESTARTSYS; + } + } + + /* + * If non-blocking mode is set, then make the check up front + * and then exit. + */ + if (filp->f_flags & O_NONBLOCK) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * cy_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: %s, count = %d\n", + tty->name, info->count);/**/ +#endif + info->count--; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count); +#endif + info->blocked_open++; + + channel = info->line; + + while (1) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; + base_addr[CyMSVR1] = CyRTS; +/* CP('S');CP('4'); */ + base_addr[CyMSVR2] = CyDTR; +#ifdef SERIAL_DEBUG_DTR + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); +#endif + local_irq_restore(flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) + || !(info->flags & ASYNC_INITIALIZED) ){ + if (info->flags & ASYNC_HUP_NOTIFY) { + retval = -EAGAIN; + }else{ + retval = -ERESTARTSYS; + } + break; + } + local_irq_save(flags); + base_addr[CyCAR] = (u_char)channel; +/* CP('L');CP1(1 && C_CLOCAL(tty)); CP1(1 && (base_addr[CyMSVR1] & CyDCD) ); */ + if (!(info->flags & ASYNC_CLOSING) + && (C_CLOCAL(tty) + || (base_addr[CyMSVR1] & CyDCD))) { + local_irq_restore(flags); + break; + } + local_irq_restore(flags); + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: %s, count = %d\n", + tty->name, info->count);/**/ +#endif + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)){ + info->count++; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count); +#endif + } + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: %s, count = %d\n", + tty->name, info->count);/**/ +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} /* block_til_ready */ + +/* + * This routine is called whenever a serial port is opened. It + * performs the serial-specific initialization for the tty structure. + */ +int +cy_open(struct tty_struct *tty, struct file * filp) +{ + struct cyclades_port *info; + int retval, line; + +/* CP('O'); */ + line = tty->index; + if ((line < 0) || (NR_PORTS <= line)){ + return -ENODEV; + } + info = &cy_port[line]; + if (info->line < 0){ + return -ENODEV; + } +#ifdef SERIAL_DEBUG_OTHER + printk("cy_open %s\n", tty->name); /* */ +#endif + if (serial_paranoia_check(info, tty->name, "cy_open")){ + return -ENODEV; + } +#ifdef SERIAL_DEBUG_OPEN + printk("cy_open %s, count = %d\n", tty->name, info->count);/**/ +#endif + info->count++; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count); +#endif + tty->driver_data = info; + info->tty = tty; + + if (!tmp_buf) { + tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); + if (!tmp_buf){ + return -ENOMEM; + } + } + + /* + * Start up serial port + */ + retval = startup(info); + if (retval){ + return retval; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("cy_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("cy_open done\n");/**/ +#endif + return 0; +} /* cy_open */ + + + +/* + * --------------------------------------------------------------------- + * serial167_init() and friends + * + * serial167_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ +static void +show_version(void) +{ + printk("MVME166/167 cd2401 driver\n"); +} /* show_version */ + +/* initialize chips on card -- return number of valid + chips (which is number of ports/4) */ + +/* + * This initialises the hardware to a reasonable state. It should + * probe the chip first so as to copy 166-Bug setup as a default for + * port 0. It initialises CMR to CyASYNC; that is never done again, so + * as to limit the number of CyINIT_CHAN commands in normal running. + * + * ... I wonder what I should do if this fails ... + */ + +void +mvme167_serial_console_setup(int cflag) +{ + volatile unsigned char* base_addr = (u_char *)BASE_ADDR; + int ch; + u_char spd; + u_char rcor, rbpr, badspeed = 0; + unsigned long flags; + + local_irq_save(flags); + + /* + * First probe channel zero of the chip, to see what speed has + * been selected. + */ + + base_addr[CyCAR] = 0; + + rcor = base_addr[CyRCOR] << 5; + rbpr = base_addr[CyRBPR]; + + for (spd = 0; spd < sizeof(baud_bpr); spd++) + if (rbpr == baud_bpr[spd] && rcor == baud_co[spd]) + break; + if (spd >= sizeof(baud_bpr)) { + spd = 14; /* 19200 */ + badspeed = 1; /* Failed to identify speed */ + } + initial_console_speed = spd; + + /* OK, we have chosen a speed, now reset and reinitialise */ + + my_udelay(20000L); /* Allow time for any active o/p to complete */ + if(base_addr[CyCCR] != 0x00){ + local_irq_restore(flags); + /* printk(" chip is never idle (CCR != 0)\n"); */ + return; + } + + base_addr[CyCCR] = CyCHIP_RESET; /* Reset the chip */ + my_udelay(1000L); + + if(base_addr[CyGFRCR] == 0x00){ + local_irq_restore(flags); + /* printk(" chip is not responding (GFRCR stayed 0)\n"); */ + return; + } + + /* + * System clock is 20Mhz, divided by 2048, so divide by 10 for a 1.0ms + * tick + */ + + base_addr[CyTPR] = 10; + + base_addr[CyPILR1] = 0x01; /* Interrupt level for modem change */ + base_addr[CyPILR2] = 0x02; /* Interrupt level for tx ints */ + base_addr[CyPILR3] = 0x03; /* Interrupt level for rx ints */ + + /* + * Attempt to set up all channels to something reasonable, and + * bang out a INIT_CHAN command. We should then be able to limit + * the ammount of fiddling we have to do in normal running. + */ + + for (ch = 3; ch >= 0 ; ch--) { + base_addr[CyCAR] = (u_char)ch; + base_addr[CyIER] = 0; + base_addr[CyCMR] = CyASYNC; + base_addr[CyLICR] = (u_char)ch << 2; + base_addr[CyLIVR] = 0x5c; + base_addr[CyTCOR] = baud_co[spd]; + base_addr[CyTBPR] = baud_bpr[spd]; + base_addr[CyRCOR] = baud_co[spd] >> 5; + base_addr[CyRBPR] = baud_bpr[spd]; + base_addr[CySCHR1] = 'Q' & 0x1f; + base_addr[CySCHR2] = 'X' & 0x1f; + base_addr[CySCRL] = 0; + base_addr[CySCRH] = 0; + base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE; + base_addr[CyCOR2] = 0; + base_addr[CyCOR3] = Cy_1_STOP; + base_addr[CyCOR4] = baud_cor4[spd]; + base_addr[CyCOR5] = 0; + base_addr[CyCOR6] = 0; + base_addr[CyCOR7] = 0; + base_addr[CyRTPRL] = 2; + base_addr[CyRTPRH] = 0; + base_addr[CyMSVR1] = 0; + base_addr[CyMSVR2] = 0; + write_cy_cmd(base_addr,CyINIT_CHAN|CyDIS_RCVR|CyDIS_XMTR); + } + + /* + * Now do specials for channel zero.... + */ + + base_addr[CyMSVR1] = CyRTS; + base_addr[CyMSVR2] = CyDTR; + base_addr[CyIER] = CyRxData; + write_cy_cmd(base_addr,CyENB_RCVR|CyENB_XMTR); + + local_irq_restore(flags); + + my_udelay(20000L); /* Let it all settle down */ + + printk("CD2401 initialised, chip is rev 0x%02x\n", base_addr[CyGFRCR]); + if (badspeed) + printk(" WARNING: Failed to identify line speed, rcor=%02x,rbpr=%02x\n", + rcor >> 5, rbpr); +} /* serial_console_init */ + +static struct tty_operations cy_ops = { + .open = cy_open, + .close = cy_close, + .write = cy_write, + .put_char = cy_put_char, + .flush_chars = cy_flush_chars, + .write_room = cy_write_room, + .chars_in_buffer = cy_chars_in_buffer, + .flush_buffer = cy_flush_buffer, + .ioctl = cy_ioctl, + .throttle = cy_throttle, + .unthrottle = cy_unthrottle, + .set_termios = cy_set_termios, + .stop = cy_stop, + .start = cy_start, + .hangup = cy_hangup, + .tiocmget = cy_tiocmget, + .tiocmset = cy_tiocmset, +}; +/* The serial driver boot-time initialization code! + Hardware I/O ports are mapped to character special devices on a + first found, first allocated manner. That is, this code searches + for Cyclom cards in the system. As each is found, it is probed + to discover how many chips (and thus how many ports) are present. + These ports are mapped to the tty ports 64 and upward in monotonic + fashion. If an 8-port card is replaced with a 16-port card, the + port mapping on a following card will shift. + + This approach is different from what is used in the other serial + device driver because the Cyclom is more properly a multiplexer, + not just an aggregation of serial ports on one card. + + If there are more cards with more ports than have been statically + allocated above, a warning is printed and the extra ports are ignored. + */ +static int __init +serial167_init(void) +{ + struct cyclades_port *info; + int ret = 0; + int good_ports = 0; + int port_num = 0; + int index; + int DefSpeed; +#ifdef notyet + struct sigaction sa; +#endif + + if (!(mvme16x_config &MVME16x_CONFIG_GOT_CD2401)) + return 0; + + cy_serial_driver = alloc_tty_driver(NR_PORTS); + if (!cy_serial_driver) + return -ENOMEM; + +#if 0 +scrn[1] = '\0'; +#endif + + show_version(); + + /* Has "console=0,9600n8" been used in bootinfo to change speed? */ + if (serial_console_cflag) + DefSpeed = serial_console_cflag & 0017; + else { + DefSpeed = initial_console_speed; + serial_console_info = &cy_port[0]; + serial_console_cflag = DefSpeed | CS8; +#if 0 + serial_console = 64; /*callout_driver.minor_start*/ +#endif + } + + /* Initialize the tty_driver structure */ + + cy_serial_driver->owner = THIS_MODULE; + cy_serial_driver->devfs_name = "tts/"; + cy_serial_driver->name = "ttyS"; + cy_serial_driver->major = TTY_MAJOR; + cy_serial_driver->minor_start = 64; + cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; + cy_serial_driver->init_termios = tty_std_termios; + cy_serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + cy_serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(cy_serial_driver, &cy_ops); + + ret = tty_register_driver(cy_serial_driver); + if (ret) { + printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n"); + put_tty_driver(cy_serial_driver); + return ret; + } + + port_num = 0; + info = cy_port; + for (index = 0; index < 1; index++) { + + good_ports = 4; + + if(port_num < NR_PORTS){ + while( good_ports-- && port_num < NR_PORTS){ + /*** initialize port ***/ + info->magic = CYCLADES_MAGIC; + info->type = PORT_CIRRUS; + info->card = index; + info->line = port_num; + info->flags = STD_COM_FLAGS; + info->tty = 0; + info->xmit_fifo_size = 12; + info->cor1 = CyPARITY_NONE|Cy_8_BITS; + info->cor2 = CyETC; + info->cor3 = Cy_1_STOP; + info->cor4 = 0x08; /* _very_ small receive threshold */ + info->cor5 = 0; + info->cor6 = 0; + info->cor7 = 0; + info->tbpr = baud_bpr[DefSpeed]; /* Tx BPR */ + info->tco = baud_co[DefSpeed]; /* Tx CO */ + info->rbpr = baud_bpr[DefSpeed]; /* Rx BPR */ + info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */ + info->close_delay = 0; + info->x_char = 0; + info->event = 0; + info->count = 0; +#ifdef SERIAL_DEBUG_COUNT + printk("cyc: %d: setting count to 0\n", __LINE__); +#endif + info->blocked_open = 0; + info->default_threshold = 0; + info->default_timeout = 0; + INIT_WORK(&info->tqueue, do_softint, info); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + /* info->session */ + /* info->pgrp */ +/*** !!!!!!!! this may expose new bugs !!!!!!!!! *********/ + info->read_status_mask = CyTIMEOUT| CySPECHAR| CyBREAK + | CyPARITY| CyFRAME| CyOVERRUN; + /* info->timeout */ + + printk("ttyS%d ", info->line); + port_num++;info++; + if(!(port_num & 7)){ + printk("\n "); + } + } + } + printk("\n"); + } + while( port_num < NR_PORTS){ + info->line = -1; + port_num++;info++; + } +#ifdef CONFIG_REMOTE_DEBUG + debug_setup(); +#endif + ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0, + "cd2401_errors", cd2401_rxerr_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_errors IRQ"); + goto cleanup_serial_driver; + } + + ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0, + "cd2401_modem", cd2401_modem_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_modem IRQ"); + goto cleanup_irq_cd2401_errors; + } + + ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0, + "cd2401_txints", cd2401_tx_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_txints IRQ"); + goto cleanup_irq_cd2401_modem; + } + + ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0, + "cd2401_rxints", cd2401_rx_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_rxints IRQ"); + goto cleanup_irq_cd2401_txints; + } + + /* Now we have registered the interrupt handlers, allow the interrupts */ + + pcc2chip[PccSCCMICR] = 0x15; /* Serial ints are level 5 */ + pcc2chip[PccSCCTICR] = 0x15; + pcc2chip[PccSCCRICR] = 0x15; + + pcc2chip[PccIMLR] = 3; /* Allow PCC2 ints above 3!? */ + + return 0; +cleanup_irq_cd2401_txints: + free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt); +cleanup_irq_cd2401_modem: + free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt); +cleanup_irq_cd2401_errors: + free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt); +cleanup_serial_driver: + if (tty_unregister_driver(cy_serial_driver)) + printk(KERN_ERR "Couldn't unregister MVME166/7 serial driver\n"); + put_tty_driver(cy_serial_driver); + return ret; +} /* serial167_init */ + +module_init(serial167_init); + + +#ifdef CYCLOM_SHOW_STATUS +static void +show_status(int line_num) +{ + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int channel; + struct cyclades_port * info; + unsigned long flags; + + info = &cy_port[line_num]; + channel = info->line; + printk(" channel %d\n", channel);/**/ + + printk(" cy_port\n"); + printk(" card line flags = %d %d %x\n", + info->card, info->line, info->flags); + printk(" *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n", + (long)info->tty, info->read_status_mask, + info->timeout, info->xmit_fifo_size); + printk(" cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n", + info->cor1, info->cor2, info->cor3, info->cor4, info->cor5, + info->cor6, info->cor7); + printk(" tbpr,tco,rbpr,rco = %d %d %d %d\n", + info->tbpr, info->tco, info->rbpr, info->rco); + printk(" close_delay event count = %d %d %d\n", + info->close_delay, info->event, info->count); + printk(" x_char blocked_open = %x %x\n", + info->x_char, info->blocked_open); + printk(" open_wait = %lx %lx %lx\n", + (long)info->open_wait); + + + local_irq_save(flags); + +/* Global Registers */ + + printk(" CyGFRCR %x\n", base_addr[CyGFRCR]); + printk(" CyCAR %x\n", base_addr[CyCAR]); + printk(" CyRISR %x\n", base_addr[CyRISR]); + printk(" CyTISR %x\n", base_addr[CyTISR]); + printk(" CyMISR %x\n", base_addr[CyMISR]); + printk(" CyRIR %x\n", base_addr[CyRIR]); + printk(" CyTIR %x\n", base_addr[CyTIR]); + printk(" CyMIR %x\n", base_addr[CyMIR]); + printk(" CyTPR %x\n", base_addr[CyTPR]); + + base_addr[CyCAR] = (u_char)channel; + +/* Virtual Registers */ + +#if 0 + printk(" CyRIVR %x\n", base_addr[CyRIVR]); + printk(" CyTIVR %x\n", base_addr[CyTIVR]); + printk(" CyMIVR %x\n", base_addr[CyMIVR]); + printk(" CyMISR %x\n", base_addr[CyMISR]); +#endif + +/* Channel Registers */ + + printk(" CyCCR %x\n", base_addr[CyCCR]); + printk(" CyIER %x\n", base_addr[CyIER]); + printk(" CyCOR1 %x\n", base_addr[CyCOR1]); + printk(" CyCOR2 %x\n", base_addr[CyCOR2]); + printk(" CyCOR3 %x\n", base_addr[CyCOR3]); + printk(" CyCOR4 %x\n", base_addr[CyCOR4]); + printk(" CyCOR5 %x\n", base_addr[CyCOR5]); +#if 0 + printk(" CyCCSR %x\n", base_addr[CyCCSR]); + printk(" CyRDCR %x\n", base_addr[CyRDCR]); +#endif + printk(" CySCHR1 %x\n", base_addr[CySCHR1]); + printk(" CySCHR2 %x\n", base_addr[CySCHR2]); +#if 0 + printk(" CySCHR3 %x\n", base_addr[CySCHR3]); + printk(" CySCHR4 %x\n", base_addr[CySCHR4]); + printk(" CySCRL %x\n", base_addr[CySCRL]); + printk(" CySCRH %x\n", base_addr[CySCRH]); + printk(" CyLNC %x\n", base_addr[CyLNC]); + printk(" CyMCOR1 %x\n", base_addr[CyMCOR1]); + printk(" CyMCOR2 %x\n", base_addr[CyMCOR2]); +#endif + printk(" CyRTPRL %x\n", base_addr[CyRTPRL]); + printk(" CyRTPRH %x\n", base_addr[CyRTPRH]); + printk(" CyMSVR1 %x\n", base_addr[CyMSVR1]); + printk(" CyMSVR2 %x\n", base_addr[CyMSVR2]); + printk(" CyRBPR %x\n", base_addr[CyRBPR]); + printk(" CyRCOR %x\n", base_addr[CyRCOR]); + printk(" CyTBPR %x\n", base_addr[CyTBPR]); + printk(" CyTCOR %x\n", base_addr[CyTCOR]); + + local_irq_restore(flags); +} /* show_status */ +#endif + + +#if 0 +/* Dummy routine in mvme16x/config.c for now */ + +/* Serial console setup. Called from linux/init/main.c */ + +void console_setup(char *str, int *ints) +{ + char *s; + int baud, bits, parity; + int cflag = 0; + + /* Sanity check. */ + if (ints[0] > 3 || ints[1] > 3) return; + + /* Get baud, bits and parity */ + baud = 2400; + bits = 8; + parity = 'n'; + if (ints[2]) baud = ints[2]; + if ((s = strchr(str, ','))) { + do { + s++; + } while(*s >= '0' && *s <= '9'); + if (*s) parity = *s++; + if (*s) bits = *s - '0'; + } + + /* Now construct a cflag setting. */ + switch(baud) { + case 1200: + cflag |= B1200; + break; + case 9600: + cflag |= B9600; + break; + case 19200: + cflag |= B19200; + break; + case 38400: + cflag |= B38400; + break; + case 2400: + default: + cflag |= B2400; + break; + } + switch(bits) { + case 7: + cflag |= CS7; + break; + default: + case 8: + cflag |= CS8; + break; + } + switch(parity) { + case 'o': case 'O': + cflag |= PARODD; + break; + case 'e': case 'E': + cflag |= PARENB; + break; + } + + serial_console_info = &cy_port[ints[1]]; + serial_console_cflag = cflag; + serial_console = ints[1] + 64; /*callout_driver.minor_start*/ +} +#endif + +/* + * The following is probably out of date for 2.1.x serial console stuff. + * + * The console is registered early on from arch/m68k/kernel/setup.c, and + * it therefore relies on the chip being setup correctly by 166-Bug. This + * seems reasonable, as the serial port has been used to invoke the system + * boot. It also means that this function must not rely on any data + * initialisation performed by serial167_init() etc. + * + * Of course, once the console has been registered, we had better ensure + * that serial167_init() doesn't leave the chip non-functional. + * + * The console must be locked when we get here. + */ + +void serial167_console_write(struct console *co, const char *str, unsigned count) +{ + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + unsigned long flags; + volatile u_char sink; + u_char ier; + int port; + u_char do_lf = 0; + int i = 0; + + local_irq_save(flags); + + /* Ensure transmitter is enabled! */ + + port = 0; + base_addr[CyCAR] = (u_char)port; + while (base_addr[CyCCR]) + ; + base_addr[CyCCR] = CyENB_XMTR; + + ier = base_addr[CyIER]; + base_addr[CyIER] = CyTxMpty; + + while (1) { + if (pcc2chip[PccSCCTICR] & 0x20) + { + /* We have a Tx int. Acknowledge it */ + sink = pcc2chip[PccTPIACKR]; + if ((base_addr[CyLICR] >> 2) == port) { + if (i == count) { + /* Last char of string is now output */ + base_addr[CyTEOIR] = CyNOTRANS; + break; + } + if (do_lf) { + base_addr[CyTDR] = '\n'; + str++; + i++; + do_lf = 0; + } + else if (*str == '\n') { + base_addr[CyTDR] = '\r'; + do_lf = 1; + } + else { + base_addr[CyTDR] = *str++; + i++; + } + base_addr[CyTEOIR] = 0; + } + else + base_addr[CyTEOIR] = CyNOTRANS; + } + } + + base_addr[CyIER] = ier; + + local_irq_restore(flags); +} + +static struct tty_driver *serial167_console_device(struct console *c, int *index) +{ + *index = c->index; + return cy_serial_driver; +} + + +static int __init serial167_console_setup(struct console *co, char *options) +{ + return 0; +} + + +static struct console sercons = { + .name = "ttyS", + .write = serial167_console_write, + .device = serial167_console_device, + .setup = serial167_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + + +static int __init serial167_console_init(void) +{ + if (vme_brdtype == VME_TYPE_MVME166 || + vme_brdtype == VME_TYPE_MVME167 || + vme_brdtype == VME_TYPE_MVME177) { + mvme167_serial_console_setup(0); + register_console(&sercons); + } + return 0; +} +console_initcall(serial167_console_init); + +#ifdef CONFIG_REMOTE_DEBUG +void putDebugChar (int c) +{ + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + unsigned long flags; + volatile u_char sink; + u_char ier; + int port; + + local_irq_save(flags); + + /* Ensure transmitter is enabled! */ + + port = DEBUG_PORT; + base_addr[CyCAR] = (u_char)port; + while (base_addr[CyCCR]) + ; + base_addr[CyCCR] = CyENB_XMTR; + + ier = base_addr[CyIER]; + base_addr[CyIER] = CyTxMpty; + + while (1) { + if (pcc2chip[PccSCCTICR] & 0x20) + { + /* We have a Tx int. Acknowledge it */ + sink = pcc2chip[PccTPIACKR]; + if ((base_addr[CyLICR] >> 2) == port) { + base_addr[CyTDR] = c; + base_addr[CyTEOIR] = 0; + break; + } + else + base_addr[CyTEOIR] = CyNOTRANS; + } + } + + base_addr[CyIER] = ier; + + local_irq_restore(flags); +} + +int getDebugChar() +{ + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + unsigned long flags; + volatile u_char sink; + u_char ier; + int port; + int i, c; + + i = debugiq.out; + if (i != debugiq.in) { + c = debugiq.buf[i]; + if (++i == DEBUG_LEN) + i = 0; + debugiq.out = i; + return c; + } + /* OK, nothing in queue, wait in poll loop */ + + local_irq_save(flags); + + /* Ensure receiver is enabled! */ + + port = DEBUG_PORT; + base_addr[CyCAR] = (u_char)port; +#if 0 + while (base_addr[CyCCR]) + ; + base_addr[CyCCR] = CyENB_RCVR; +#endif + ier = base_addr[CyIER]; + base_addr[CyIER] = CyRxData; + + while (1) { + if (pcc2chip[PccSCCRICR] & 0x20) + { + /* We have a Rx int. Acknowledge it */ + sink = pcc2chip[PccRPIACKR]; + if ((base_addr[CyLICR] >> 2) == port) { + int cnt = base_addr[CyRFOC]; + while (cnt-- > 0) + { + c = base_addr[CyRDR]; + if (c == 0) + printk ("!! debug char is null (cnt=%d) !!", cnt); + else + queueDebugChar (c); + } + base_addr[CyREOIR] = 0; + i = debugiq.out; + if (i == debugiq.in) + panic ("Debug input queue empty!"); + c = debugiq.buf[i]; + if (++i == DEBUG_LEN) + i = 0; + debugiq.out = i; + break; + } + else + base_addr[CyREOIR] = CyNOTRANS; + } + } + + base_addr[CyIER] = ier; + + local_irq_restore(flags); + + return (c); +} + +void queueDebugChar (int c) +{ + int i; + + i = debugiq.in; + debugiq.buf[i] = c; + if (++i == DEBUG_LEN) + i = 0; + if (i != debugiq.out) + debugiq.in = i; +} + +static void +debug_setup() +{ + unsigned long flags; + volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + int i, cflag; + + cflag = B19200; + + local_irq_save(flags); + + for (i = 0; i < 4; i++) + { + base_addr[CyCAR] = i; + base_addr[CyLICR] = i << 2; + } + + debugiq.in = debugiq.out = 0; + + base_addr[CyCAR] = DEBUG_PORT; + + /* baud rate */ + i = cflag & CBAUD; + + base_addr[CyIER] = 0; + + base_addr[CyCMR] = CyASYNC; + base_addr[CyLICR] = DEBUG_PORT << 2; + base_addr[CyLIVR] = 0x5c; + + /* tx and rx baud rate */ + + base_addr[CyTCOR] = baud_co[i]; + base_addr[CyTBPR] = baud_bpr[i]; + base_addr[CyRCOR] = baud_co[i] >> 5; + base_addr[CyRBPR] = baud_bpr[i]; + + /* set line characteristics according configuration */ + + base_addr[CySCHR1] = 0; + base_addr[CySCHR2] = 0; + base_addr[CySCRL] = 0; + base_addr[CySCRH] = 0; + base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE; + base_addr[CyCOR2] = 0; + base_addr[CyCOR3] = Cy_1_STOP; + base_addr[CyCOR4] = baud_cor4[i]; + base_addr[CyCOR5] = 0; + base_addr[CyCOR6] = 0; + base_addr[CyCOR7] = 0; + + write_cy_cmd(base_addr,CyINIT_CHAN); + write_cy_cmd(base_addr,CyENB_RCVR); + + base_addr[CyCAR] = DEBUG_PORT; /* !!! Is this needed? */ + + base_addr[CyRTPRL] = 2; + base_addr[CyRTPRH] = 0; + + base_addr[CyMSVR1] = CyRTS; + base_addr[CyMSVR2] = CyDTR; + + base_addr[CyIER] = CyRxData; + + local_irq_restore(flags); + +} /* debug_setup */ + +#endif + +MODULE_LICENSE("GPL"); |
