diff options
Diffstat (limited to 'drivers/char/ser_a2232.h')
-rw-r--r-- | drivers/char/ser_a2232.h | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/drivers/char/ser_a2232.h b/drivers/char/ser_a2232.h new file mode 100644 index 0000000..bc09eb9 --- /dev/null +++ b/drivers/char/ser_a2232.h @@ -0,0 +1,202 @@ +/* drivers/char/ser_a2232.h */ + +/* $Id: ser_a2232.h,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ + +/* Linux serial driver for the Amiga A2232 board */ + +/* This driver is MAINTAINED. Before applying any changes, please contact + * the author. + */ + +/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de> + * alias The A2232 driver project <A2232@gmx.net> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _SER_A2232_H_ +#define _SER_A2232_H_ + +/* + How many boards are to be supported at maximum; + "up to five A2232 Multiport Serial Cards may be installed in a + single Amiga 2000" states the A2232 User's Guide. If you have + more slots available, you might want to change the value below. +*/ +#define MAX_A2232_BOARDS 5 + +#ifndef A2232_NORMAL_MAJOR +/* This allows overriding on the compiler commandline, or in a "major.h" + include or something like that */ +#define A2232_NORMAL_MAJOR 224 /* /dev/ttyY* */ +#define A2232_CALLOUT_MAJOR 225 /* /dev/cuy* */ +#endif + +/* Some magic is always good - Who knows :) */ +#define A2232_MAGIC 0x000a2232 + +/* A2232 port structure to keep track of the + status of every single line used */ +struct a2232_port{ + struct gs_port gs; + unsigned int which_a2232; + unsigned int which_port_on_a2232; + short disable_rx; + short throttle_input; + short cd_status; +}; + +#define NUMLINES 7 /* number of lines per board */ +#define A2232_IOBUFLEN 256 /* number of bytes per buffer */ +#define A2232_IOBUFLENMASK 0xff /* mask for maximum number of bytes */ + + +#define A2232_UNKNOWN 0 /* crystal not known */ +#define A2232_NORMAL 1 /* normal A2232 (1.8432 MHz oscillator) */ +#define A2232_TURBO 2 /* turbo A2232 (3.6864 MHz oscillator) */ + + +struct a2232common { + char Crystal; /* normal (1) or turbo (2) board? */ + u_char Pad_a; + u_char TimerH; /* timer value after speed check */ + u_char TimerL; + u_char CDHead; /* head pointer for CD message queue */ + u_char CDTail; /* tail pointer for CD message queue */ + u_char CDStatus; + u_char Pad_b; +}; + +struct a2232status { + u_char InHead; /* input queue head */ + u_char InTail; /* input queue tail */ + u_char OutDisable; /* disables output */ + u_char OutHead; /* output queue head */ + u_char OutTail; /* output queue tail */ + u_char OutCtrl; /* soft flow control character to send */ + u_char OutFlush; /* flushes output buffer */ + u_char Setup; /* causes reconfiguration */ + u_char Param; /* parameter byte - see A2232PARAM */ + u_char Command; /* command byte - see A2232CMD */ + u_char SoftFlow; /* enables xon/xoff flow control */ + /* private 65EC02 fields: */ + u_char XonOff; /* stores XON/XOFF enable/disable */ +}; + +#define A2232_MEMPAD1 \ + (0x0200 - NUMLINES * sizeof(struct a2232status) - \ + sizeof(struct a2232common)) +#define A2232_MEMPAD2 (0x2000 - NUMLINES * A2232_IOBUFLEN - A2232_IOBUFLEN) + +struct a2232memory { + struct a2232status Status[NUMLINES]; /* 0x0000-0x006f status areas */ + struct a2232common Common; /* 0x0070-0x0077 common flags */ + u_char Dummy1[A2232_MEMPAD1]; /* 0x00XX-0x01ff */ + u_char OutBuf[NUMLINES][A2232_IOBUFLEN];/* 0x0200-0x08ff output bufs */ + u_char InBuf[NUMLINES][A2232_IOBUFLEN]; /* 0x0900-0x0fff input bufs */ + u_char InCtl[NUMLINES][A2232_IOBUFLEN]; /* 0x1000-0x16ff control data */ + u_char CDBuf[A2232_IOBUFLEN]; /* 0x1700-0x17ff CD event buffer */ + u_char Dummy2[A2232_MEMPAD2]; /* 0x1800-0x2fff */ + u_char Code[0x1000]; /* 0x3000-0x3fff code area */ + u_short InterruptAck; /* 0x4000 intr ack */ + u_char Dummy3[0x3ffe]; /* 0x4002-0x7fff */ + u_short Enable6502Reset; /* 0x8000 Stop board, */ + /* 6502 RESET line held low */ + u_char Dummy4[0x3ffe]; /* 0x8002-0xbfff */ + u_short ResetBoard; /* 0xc000 reset board & run, */ + /* 6502 RESET line held high */ +}; + +#undef A2232_MEMPAD1 +#undef A2232_MEMPAD2 + +#define A2232INCTL_CHAR 0 /* corresponding byte in InBuf is a character */ +#define A2232INCTL_EVENT 1 /* corresponding byte in InBuf is an event */ + +#define A2232EVENT_Break 1 /* break set */ +#define A2232EVENT_CarrierOn 2 /* carrier raised */ +#define A2232EVENT_CarrierOff 3 /* carrier dropped */ +#define A2232EVENT_Sync 4 /* don't know, defined in 2232.ax */ + +#define A2232CMD_Enable 0x1 /* enable/DTR bit */ +#define A2232CMD_Close 0x2 /* close the device */ +#define A2232CMD_Open 0xb /* open the device */ +#define A2232CMD_CMask 0xf /* command mask */ +#define A2232CMD_RTSOff 0x0 /* turn off RTS */ +#define A2232CMD_RTSOn 0x8 /* turn on RTS */ +#define A2232CMD_Break 0xd /* transmit a break */ +#define A2232CMD_RTSMask 0xc /* mask for RTS stuff */ +#define A2232CMD_NoParity 0x00 /* don't use parity */ +#define A2232CMD_OddParity 0x20 /* odd parity */ +#define A2232CMD_EvenParity 0x60 /* even parity */ +#define A2232CMD_ParityMask 0xe0 /* parity mask */ + +#define A2232PARAM_B115200 0x0 /* baud rates */ +#define A2232PARAM_B50 0x1 +#define A2232PARAM_B75 0x2 +#define A2232PARAM_B110 0x3 +#define A2232PARAM_B134 0x4 +#define A2232PARAM_B150 0x5 +#define A2232PARAM_B300 0x6 +#define A2232PARAM_B600 0x7 +#define A2232PARAM_B1200 0x8 +#define A2232PARAM_B1800 0x9 +#define A2232PARAM_B2400 0xa +#define A2232PARAM_B3600 0xb +#define A2232PARAM_B4800 0xc +#define A2232PARAM_B7200 0xd +#define A2232PARAM_B9600 0xe +#define A2232PARAM_B19200 0xf +#define A2232PARAM_BaudMask 0xf /* baud rate mask */ +#define A2232PARAM_RcvBaud 0x10 /* enable receive baud rate */ +#define A2232PARAM_8Bit 0x00 /* numbers of bits */ +#define A2232PARAM_7Bit 0x20 +#define A2232PARAM_6Bit 0x40 +#define A2232PARAM_5Bit 0x60 +#define A2232PARAM_BitMask 0x60 /* numbers of bits mask */ + + +/* Standard speeds tables, -1 means unavailable, -2 means 0 baud: switch off line */ +#define A2232_BAUD_TABLE_NOAVAIL -1 +#define A2232_BAUD_TABLE_NUM_RATES (18) +static int a2232_baud_table[A2232_BAUD_TABLE_NUM_RATES*3] = { + //Baud //Normal //Turbo + 50, A2232PARAM_B50, A2232_BAUD_TABLE_NOAVAIL, + 75, A2232PARAM_B75, A2232_BAUD_TABLE_NOAVAIL, + 110, A2232PARAM_B110, A2232_BAUD_TABLE_NOAVAIL, + 134, A2232PARAM_B134, A2232_BAUD_TABLE_NOAVAIL, + 150, A2232PARAM_B150, A2232PARAM_B75, + 200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, + 300, A2232PARAM_B300, A2232PARAM_B150, + 600, A2232PARAM_B600, A2232PARAM_B300, + 1200, A2232PARAM_B1200, A2232PARAM_B600, + 1800, A2232PARAM_B1800, A2232_BAUD_TABLE_NOAVAIL, + 2400, A2232PARAM_B2400, A2232PARAM_B1200, + 4800, A2232PARAM_B4800, A2232PARAM_B2400, + 9600, A2232PARAM_B9600, A2232PARAM_B4800, + 19200, A2232PARAM_B19200, A2232PARAM_B9600, + 38400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B19200, + 57600, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, +#ifdef A2232_SPEEDHACK + 115200, A2232PARAM_B115200, A2232_BAUD_TABLE_NOAVAIL, + 230400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B115200 +#else + 115200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL, + 230400, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL +#endif +}; +#endif |