summaryrefslogtreecommitdiffstats
path: root/drivers/char/genrtc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/genrtc.c')
-rw-r--r--drivers/char/genrtc.c535
1 files changed, 535 insertions, 0 deletions
diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
new file mode 100644
index 0000000..d3a2bc3
--- /dev/null
+++ b/drivers/char/genrtc.c
@@ -0,0 +1,535 @@
+/*
+ * Real Time Clock interface for
+ * - q40 and other m68k machines,
+ * - HP PARISC machines
+ * - PowerPC machines
+ * emulate some RTC irq capabilities in software
+ *
+ * Copyright (C) 1999 Richard Zidlicky
+ *
+ * based on Paul Gortmaker's rtc.c device and
+ * Sam Creasey Generic rtc driver
+ *
+ * This driver allows use of the real time clock (built into
+ * nearly all computers) from user space. It exports the /dev/rtc
+ * interface supporting various ioctl() and also the /proc/dev/rtc
+ * pseudo-file for status information.
+ *
+ * The ioctls can be used to set the interrupt behaviour where
+ * supported.
+ *
+ * The /dev/rtc interface will block on reads until an interrupt
+ * has been received. If a RTC interrupt has already happened,
+ * it will output an unsigned long and then block. The output value
+ * contains the interrupt status in the low byte and the number of
+ * interrupts since the last read in the remaining high bytes. The
+ * /dev/rtc interface can also be used with the select(2) call.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+
+ * 1.01 fix for 2.3.X rz@linux-m68k.org
+ * 1.02 merged with code from genrtc.c rz@linux-m68k.org
+ * 1.03 make it more portable zippel@linux-m68k.org
+ * 1.04 removed useless timer code rz@linux-m68k.org
+ * 1.05 portable RTC_UIE emulation rz@linux-m68k.org
+ * 1.06 set_rtc_time can return an error trini@kernel.crashing.org
+ * 1.07 ported to HP PARISC (hppa) Helge Deller <deller@gmx.de>
+ */
+
+#define RTC_VERSION "1.07"
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fcntl.h>
+
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/workqueue.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/rtc.h>
+
+/*
+ * We sponge a minor off of the misc major. No need slurping
+ * up another valuable major dev number for this. If you add
+ * an ioctl, make sure you don't conflict with SPARC's RTC
+ * ioctls.
+ */
+
+static DECLARE_WAIT_QUEUE_HEAD(gen_rtc_wait);
+
+/*
+ * Bits in gen_rtc_status.
+ */
+
+#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */
+
+static unsigned char gen_rtc_status; /* bitmapped status byte. */
+static unsigned long gen_rtc_irq_data; /* our output to the world */
+
+/* months start at 0 now */
+static unsigned char days_in_mo[] =
+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
+
+static int irq_active;
+
+#ifdef CONFIG_GEN_RTC_X
+static struct work_struct genrtc_task;
+static struct timer_list timer_task;
+
+static unsigned int oldsecs;
+static int lostint;
+static unsigned long tt_exp;
+
+static void gen_rtc_timer(unsigned long data);
+
+static volatile int stask_active; /* schedule_work */
+static volatile int ttask_active; /* timer_task */
+static int stop_rtc_timers; /* don't requeue tasks */
+static DEFINE_SPINLOCK(gen_rtc_lock);
+
+static void gen_rtc_interrupt(unsigned long arg);
+
+/*
+ * Routine to poll RTC seconds field for change as often as possible,
+ * after first RTC_UIE use timer to reduce polling
+ */
+static void genrtc_troutine(void *data)
+{
+ unsigned int tmp = get_rtc_ss();
+
+ if (stop_rtc_timers) {
+ stask_active = 0;
+ return;
+ }
+
+ if (oldsecs != tmp){
+ oldsecs = tmp;
+
+ timer_task.function = gen_rtc_timer;
+ timer_task.expires = jiffies + HZ - (HZ/10);
+ tt_exp=timer_task.expires;
+ ttask_active=1;
+ stask_active=0;
+ add_timer(&timer_task);
+
+ gen_rtc_interrupt(0);
+ } else if (schedule_work(&genrtc_task) == 0)
+ stask_active = 0;
+}
+
+static void gen_rtc_timer(unsigned long data)
+{
+ lostint = get_rtc_ss() - oldsecs ;
+ if (lostint<0)
+ lostint = 60 - lostint;
+ if (time_after(jiffies, tt_exp))
+ printk(KERN_INFO "genrtc: timer task delayed by %ld jiffies\n",
+ jiffies-tt_exp);
+ ttask_active=0;
+ stask_active=1;
+ if ((schedule_work(&genrtc_task) == 0))
+ stask_active = 0;
+}
+
+/*
+ * call gen_rtc_interrupt function to signal an RTC_UIE,
+ * arg is unused.
+ * Could be invoked either from a real interrupt handler or
+ * from some routine that periodically (eg 100HZ) monitors
+ * whether RTC_SECS changed
+ */
+static void gen_rtc_interrupt(unsigned long arg)
+{
+ /* We store the status in the low byte and the number of
+ * interrupts received since the last read in the remainder
+ * of rtc_irq_data. */
+
+ gen_rtc_irq_data += 0x100;
+ gen_rtc_irq_data &= ~0xff;
+ gen_rtc_irq_data |= RTC_UIE;
+
+ if (lostint){
+ printk("genrtc: system delaying clock ticks?\n");
+ /* increment count so that userspace knows something is wrong */
+ gen_rtc_irq_data += ((lostint-1)<<8);
+ lostint = 0;
+ }
+
+ wake_up_interruptible(&gen_rtc_wait);
+}
+
+/*
+ * Now all the various file operations that we export.
+ */
+static ssize_t gen_rtc_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ unsigned long data;
+ ssize_t retval;
+
+ if (count != sizeof (unsigned int) && count != sizeof (unsigned long))
+ return -EINVAL;
+
+ if (file->f_flags & O_NONBLOCK && !gen_rtc_irq_data)
+ return -EAGAIN;
+
+ add_wait_queue(&gen_rtc_wait, &wait);
+ retval = -ERESTARTSYS;
+
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ data = xchg(&gen_rtc_irq_data, 0);
+ if (data)
+ break;
+ if (signal_pending(current))
+ goto out;
+ schedule();
+ }
+
+ /* first test allows optimizer to nuke this case for 32-bit machines */
+ if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) {
+ unsigned int uidata = data;
+ retval = put_user(uidata, (unsigned long __user *)buf);
+ }
+ else {
+ retval = put_user(data, (unsigned long __user *)buf);
+ }
+ if (!retval)
+ retval = sizeof(unsigned long);
+ out:
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&gen_rtc_wait, &wait);
+
+ return retval;
+}
+
+static unsigned int gen_rtc_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ poll_wait(file, &gen_rtc_wait, wait);
+ if (gen_rtc_irq_data != 0)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+#endif
+
+/*
+ * Used to disable/enable interrupts, only RTC_UIE supported
+ * We also clear out any old irq data after an ioctl() that
+ * meddles with the interrupt enable/disable bits.
+ */
+
+static inline void gen_clear_rtc_irq_bit(unsigned char bit)
+{
+#ifdef CONFIG_GEN_RTC_X
+ stop_rtc_timers = 1;
+ if (ttask_active){
+ del_timer_sync(&timer_task);
+ ttask_active = 0;
+ }
+ while (stask_active)
+ schedule();
+
+ spin_lock(&gen_rtc_lock);
+ irq_active = 0;
+ spin_unlock(&gen_rtc_lock);
+#endif
+}
+
+static inline int gen_set_rtc_irq_bit(unsigned char bit)
+{
+#ifdef CONFIG_GEN_RTC_X
+ spin_lock(&gen_rtc_lock);
+ if ( !irq_active ) {
+ irq_active = 1;
+ stop_rtc_timers = 0;
+ lostint = 0;
+ INIT_WORK(&genrtc_task, genrtc_troutine, NULL);
+ oldsecs = get_rtc_ss();
+ init_timer(&timer_task);
+
+ stask_active = 1;
+ if (schedule_work(&genrtc_task) == 0){
+ stask_active = 0;
+ }
+ }
+ spin_unlock(&gen_rtc_lock);
+ gen_rtc_irq_data = 0;
+ return 0;
+#else
+ return -EINVAL;
+#endif
+}
+
+static int gen_rtc_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct rtc_time wtime;
+ struct rtc_pll_info pll;
+ void __user *argp = (void __user *)arg;
+
+ switch (cmd) {
+
+ case RTC_PLL_GET:
+ if (get_rtc_pll(&pll))
+ return -EINVAL;
+ else
+ return copy_to_user(argp, &pll, sizeof pll) ? -EFAULT : 0;
+
+ case RTC_PLL_SET:
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+ if (copy_from_user(&pll, argp, sizeof(pll)))
+ return -EFAULT;
+ return set_rtc_pll(&pll);
+
+ case RTC_UIE_OFF: /* disable ints from RTC updates. */
+ gen_clear_rtc_irq_bit(RTC_UIE);
+ return 0;
+
+ case RTC_UIE_ON: /* enable ints for RTC updates. */
+ return gen_set_rtc_irq_bit(RTC_UIE);
+
+ case RTC_RD_TIME: /* Read the time/date from RTC */
+ /* this doesn't get week-day, who cares */
+ memset(&wtime, 0, sizeof(wtime));
+ get_rtc_time(&wtime);
+
+ return copy_to_user(argp, &wtime, sizeof(wtime)) ? -EFAULT : 0;
+
+ case RTC_SET_TIME: /* Set the RTC */
+ {
+ int year;
+ unsigned char leap_yr;
+
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+
+ if (copy_from_user(&wtime, argp, sizeof(wtime)))
+ return -EFAULT;
+
+ year = wtime.tm_year + 1900;
+ leap_yr = ((!(year % 4) && (year % 100)) ||
+ !(year % 400));
+
+ if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) || (wtime.tm_mday < 1))
+ return -EINVAL;
+
+ if (wtime.tm_mday < 0 || wtime.tm_mday >
+ (days_in_mo[wtime.tm_mon] + ((wtime.tm_mon == 1) && leap_yr)))
+ return -EINVAL;
+
+ if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 ||
+ wtime.tm_min < 0 || wtime.tm_min >= 60 ||
+ wtime.tm_sec < 0 || wtime.tm_sec >= 60)
+ return -EINVAL;
+
+ return set_rtc_time(&wtime);
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * We enforce only one user at a time here with the open/close.
+ * Also clear the previous interrupt data on an open, and clean
+ * up things on a close.
+ */
+
+static int gen_rtc_open(struct inode *inode, struct file *file)
+{
+ if (gen_rtc_status & RTC_IS_OPEN)
+ return -EBUSY;
+
+ gen_rtc_status |= RTC_IS_OPEN;
+ gen_rtc_irq_data = 0;
+ irq_active = 0;
+
+ return 0;
+}
+
+static int gen_rtc_release(struct inode *inode, struct file *file)
+{
+ /*
+ * Turn off all interrupts once the device is no longer
+ * in use and clear the data.
+ */
+
+ gen_clear_rtc_irq_bit(RTC_PIE|RTC_AIE|RTC_UIE);
+
+ gen_rtc_status &= ~RTC_IS_OPEN;
+ return 0;
+}
+
+
+#ifdef CONFIG_PROC_FS
+
+/*
+ * Info exported via "/proc/rtc".
+ */
+
+static int gen_rtc_proc_output(char *buf)
+{
+ char *p;
+ struct rtc_time tm;
+ unsigned int flags;
+ struct rtc_pll_info pll;
+
+ p = buf;
+
+ flags = get_rtc_time(&tm);
+
+ p += sprintf(p,
+ "rtc_time\t: %02d:%02d:%02d\n"
+ "rtc_date\t: %04d-%02d-%02d\n"
+ "rtc_epoch\t: %04u\n",
+ tm.tm_hour, tm.tm_min, tm.tm_sec,
+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, 1900);
+
+ tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
+
+ p += sprintf(p, "alarm\t\t: ");
+ if (tm.tm_hour <= 24)
+ p += sprintf(p, "%02d:", tm.tm_hour);
+ else
+ p += sprintf(p, "**:");
+
+ if (tm.tm_min <= 59)
+ p += sprintf(p, "%02d:", tm.tm_min);
+ else
+ p += sprintf(p, "**:");
+
+ if (tm.tm_sec <= 59)
+ p += sprintf(p, "%02d\n", tm.tm_sec);
+ else
+ p += sprintf(p, "**\n");
+
+ p += sprintf(p,
+ "DST_enable\t: %s\n"
+ "BCD\t\t: %s\n"
+ "24hr\t\t: %s\n"
+ "square_wave\t: %s\n"
+ "alarm_IRQ\t: %s\n"
+ "update_IRQ\t: %s\n"
+ "periodic_IRQ\t: %s\n"
+ "periodic_freq\t: %ld\n"
+ "batt_status\t: %s\n",
+ (flags & RTC_DST_EN) ? "yes" : "no",
+ (flags & RTC_DM_BINARY) ? "no" : "yes",
+ (flags & RTC_24H) ? "yes" : "no",
+ (flags & RTC_SQWE) ? "yes" : "no",
+ (flags & RTC_AIE) ? "yes" : "no",
+ irq_active ? "yes" : "no",
+ (flags & RTC_PIE) ? "yes" : "no",
+ 0L /* freq */,
+ (flags & RTC_BATT_BAD) ? "bad" : "okay");
+ if (!get_rtc_pll(&pll))
+ p += sprintf(p,
+ "PLL adjustment\t: %d\n"
+ "PLL max +ve adjustment\t: %d\n"
+ "PLL max -ve adjustment\t: %d\n"
+ "PLL +ve adjustment factor\t: %d\n"
+ "PLL -ve adjustment factor\t: %d\n"
+ "PLL frequency\t: %ld\n",
+ pll.pll_value,
+ pll.pll_max,
+ pll.pll_min,
+ pll.pll_posmult,
+ pll.pll_negmult,
+ pll.pll_clock);
+ return p - buf;
+}
+
+static int gen_rtc_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int len = gen_rtc_proc_output (page);
+ if (len <= off+count) *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len>count) len = count;
+ if (len<0) len = 0;
+ return len;
+}
+
+static int __init gen_rtc_proc_init(void)
+{
+ struct proc_dir_entry *r;
+
+ r = create_proc_read_entry("driver/rtc", 0, NULL, gen_rtc_read_proc, NULL);
+ if (!r)
+ return -ENOMEM;
+ return 0;
+}
+#else
+static inline int gen_rtc_proc_init(void) { return 0; }
+#endif /* CONFIG_PROC_FS */
+
+
+/*
+ * The various file operations we support.
+ */
+
+static struct file_operations gen_rtc_fops = {
+ .owner = THIS_MODULE,
+#ifdef CONFIG_GEN_RTC_X
+ .read = gen_rtc_read,
+ .poll = gen_rtc_poll,
+#endif
+ .ioctl = gen_rtc_ioctl,
+ .open = gen_rtc_open,
+ .release = gen_rtc_release,
+};
+
+static struct miscdevice rtc_gen_dev =
+{
+ .minor = RTC_MINOR,
+ .name = "rtc",
+ .fops = &gen_rtc_fops,
+};
+
+static int __init rtc_generic_init(void)
+{
+ int retval;
+
+ printk(KERN_INFO "Generic RTC Driver v%s\n", RTC_VERSION);
+
+ retval = misc_register(&rtc_gen_dev);
+ if (retval < 0)
+ return retval;
+
+ retval = gen_rtc_proc_init();
+ if (retval) {
+ misc_deregister(&rtc_gen_dev);
+ return retval;
+ }
+
+ return 0;
+}
+
+static void __exit rtc_generic_exit(void)
+{
+ remove_proc_entry ("driver/rtc", NULL);
+ misc_deregister(&rtc_gen_dev);
+}
+
+
+module_init(rtc_generic_init);
+module_exit(rtc_generic_exit);
+
+MODULE_AUTHOR("Richard Zidlicky");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(RTC_MINOR);
OpenPOWER on IntegriCloud