diff options
Diffstat (limited to 'drivers/char/cyclades.c')
| -rw-r--r-- | drivers/char/cyclades.c | 311 |
1 files changed, 156 insertions, 155 deletions
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index e5de040..85c734b 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -4503,6 +4503,159 @@ static void cy_hangup(struct tty_struct *tty) * --------------------------------------------------------------------- */ +static void __devinit cy_init_card(struct cyclades_card *cinfo, + const unsigned int board) +{ + struct cyclades_port *info; + u32 mailbox; + unsigned int nports; + unsigned short chip_number; + int index, port; + + if (cinfo->num_chips == -1) { /* Cyclades-Z */ + mailbox = readl(&((struct RUNTIME_9060 __iomem *) + cinfo->ctl_addr)->mail_box_0); + nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; + cinfo->intr_enabled = 0; + cinfo->nports = 0; /* Will be correctly set later, after + Z FW is loaded */ + spin_lock_init(&cinfo->card_lock); + for (port = cinfo->first_line; + port < cinfo->first_line + nports; port++) { + info = &cy_port[port]; + info->magic = CYCLADES_MAGIC; + info->type = PORT_STARTECH; + info->card = board; + info->line = port; + info->chip_rev = 0; + info->flags = STD_COM_FLAGS; + info->tty = NULL; + if (mailbox == ZO_V1) + info->xmit_fifo_size = CYZ_FIFO_SIZE; + else + info->xmit_fifo_size = + 4 * CYZ_FIFO_SIZE; + info->cor1 = 0; + info->cor2 = 0; + info->cor3 = 0; + info->cor4 = 0; + info->cor5 = 0; + info->tbpr = 0; + info->tco = 0; + info->rbpr = 0; + info->rco = 0; + info->custom_divisor = 0; + info->close_delay = 5 * HZ / 10; + info->closing_wait = CLOSING_WAIT_DELAY; + info->icount.cts = info->icount.dsr = + info->icount.rng = info->icount.dcd = 0; + info->icount.rx = info->icount.tx = 0; + info->icount.frame = info->icount.parity = 0; + info->icount.overrun = info->icount.brk = 0; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + info->default_threshold = 0; + info->default_timeout = 0; + INIT_WORK(&info->tqueue, do_softint); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->shutdown_wait); + init_waitqueue_head(&info->delta_msr_wait); + /* info->session */ + /* info->pgrp */ + info->read_status_mask = 0; + /* info->timeout */ + /* Bentson's vars */ + info->jiffies[0] = 0; + info->jiffies[1] = 0; + info->jiffies[2] = 0; + info->rflush_count = 0; +#ifdef CONFIG_CYZ_INTR + init_timer(&cyz_rx_full_timer[port]); + cyz_rx_full_timer[port].function = NULL; +#endif + } +#ifndef CONFIG_CYZ_INTR + if (!timer_pending(&cyz_timerlist)) { + mod_timer(&cyz_timerlist, jiffies + 1); +#ifdef CY_PCI_DEBUG + printk("Cyclades-Z polling initialized\n"); +#endif + } +#endif /* CONFIG_CYZ_INTR */ + + } else { /* Cyclom-Y of some kind */ + index = cinfo->bus_index; + spin_lock_init(&cinfo->card_lock); + cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; + for (port = cinfo->first_line; + port < cinfo->first_line + cinfo->nports; port++) { + info = &cy_port[port]; + info->magic = CYCLADES_MAGIC; + info->type = PORT_CIRRUS; + info->card = board; + info->line = port; + info->flags = STD_COM_FLAGS; + info->tty = NULL; + info->xmit_fifo_size = CyMAX_CHAR_FIFO; + info->cor1 = + CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; + info->cor2 = CyETC; + info->cor3 = 0x08; /* _very_ small rcv threshold */ + info->cor4 = 0; + info->cor5 = 0; + info->custom_divisor = 0; + info->close_delay = 5 * HZ / 10; + info->closing_wait = CLOSING_WAIT_DELAY; + info->icount.cts = info->icount.dsr = + info->icount.rng = info->icount.dcd = 0; + info->icount.rx = info->icount.tx = 0; + info->icount.frame = info->icount.parity = 0; + info->icount.overrun = info->icount.brk = 0; + chip_number = (port - cinfo->first_line) / 4; + if ((info->chip_rev = + readb(cinfo->base_addr + + (cy_chip_offset[chip_number] << + index) + (CyGFRCR << index))) >= + CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + info->tbpr = baud_bpr_60[13]; /* Tx BPR */ + info->tco = baud_co_60[13]; /* Tx CO */ + info->rbpr = baud_bpr_60[13]; /* Rx BPR */ + info->rco = baud_co_60[13]; /* Rx CO */ + info->rflow = 0; + info->rtsdtr_inv = 1; + } else { + info->tbpr = baud_bpr_25[13]; /* Tx BPR */ + info->tco = baud_co_25[13]; /* Tx CO */ + info->rbpr = baud_bpr_25[13]; /* Rx BPR */ + info->rco = baud_co_25[13]; /* Rx CO */ + info->rflow = 0; + info->rtsdtr_inv = 0; + } + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + info->default_threshold = 0; + info->default_timeout = 0; + INIT_WORK(&info->tqueue, do_softint); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->shutdown_wait); + init_waitqueue_head(&info->delta_msr_wait); + /* info->session */ + /* info->pgrp */ + info->read_status_mask = + CyTIMEOUT | CySPECHAR | CyBREAK + | CyPARITY | CyFRAME | CyOVERRUN; + /* info->timeout */ + } + } +} + /* initialize chips on Cyclom-Y card -- return number of valid chips (which is number of ports/4) */ static unsigned short __init @@ -5300,13 +5453,7 @@ static const struct tty_operations cy_ops = { static int __init cy_init(void) { - struct cyclades_port *info; - struct cyclades_card *cinfo; - int number_z_boards = 0; - int board, port, i, index; - unsigned long mailbox; - unsigned short chip_number; - int nports; + unsigned int i; cy_serial_driver = alloc_tty_driver(NR_PORTS); if (!cy_serial_driver) @@ -5369,154 +5516,8 @@ static int __init cy_init(void) } /* initialize per-port data structures for each valid board found */ - for (board = 0; board < cy_nboard; board++) { - cinfo = &cy_card[board]; - if (cinfo->num_chips == -1) { /* Cyclades-Z */ - number_z_boards++; - mailbox = readl(&((struct RUNTIME_9060 __iomem *) - cy_card[board].ctl_addr)-> - mail_box_0); - nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; - cinfo->intr_enabled = 0; - cinfo->nports = 0; /* Will be correctly set later, after - Z FW is loaded */ - spin_lock_init(&cinfo->card_lock); - for (port = cinfo->first_line; - port < cinfo->first_line + nports; port++) { - info = &cy_port[port]; - info->magic = CYCLADES_MAGIC; - info->type = PORT_STARTECH; - info->card = board; - info->line = port; - info->chip_rev = 0; - info->flags = STD_COM_FLAGS; - info->tty = NULL; - if (mailbox == ZO_V1) - info->xmit_fifo_size = CYZ_FIFO_SIZE; - else - info->xmit_fifo_size = - 4 * CYZ_FIFO_SIZE; - info->cor1 = 0; - info->cor2 = 0; - info->cor3 = 0; - info->cor4 = 0; - info->cor5 = 0; - info->tbpr = 0; - info->tco = 0; - info->rbpr = 0; - info->rco = 0; - info->custom_divisor = 0; - info->close_delay = 5 * HZ / 10; - info->closing_wait = CLOSING_WAIT_DELAY; - info->icount.cts = info->icount.dsr = - info->icount.rng = info->icount.dcd = 0; - info->icount.rx = info->icount.tx = 0; - info->icount.frame = info->icount.parity = 0; - info->icount.overrun = info->icount.brk = 0; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - info->default_threshold = 0; - info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->shutdown_wait); - init_waitqueue_head(&info->delta_msr_wait); - /* info->session */ - /* info->pgrp */ - info->read_status_mask = 0; - /* info->timeout */ - /* Bentson's vars */ - info->jiffies[0] = 0; - info->jiffies[1] = 0; - info->jiffies[2] = 0; - info->rflush_count = 0; -#ifdef CONFIG_CYZ_INTR - init_timer(&cyz_rx_full_timer[port]); - cyz_rx_full_timer[port].function = NULL; -#endif - } - continue; - } else { /* Cyclom-Y of some kind */ - index = cinfo->bus_index; - spin_lock_init(&cinfo->card_lock); - cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; - for (port = cinfo->first_line; - port < cinfo->first_line + cinfo->nports; port++) { - info = &cy_port[port]; - info->magic = CYCLADES_MAGIC; - info->type = PORT_CIRRUS; - info->card = board; - info->line = port; - info->flags = STD_COM_FLAGS; - info->tty = NULL; - info->xmit_fifo_size = CyMAX_CHAR_FIFO; - info->cor1 = - CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; - info->cor2 = CyETC; - info->cor3 = 0x08; /* _very_ small rcv threshold */ - info->cor4 = 0; - info->cor5 = 0; - info->custom_divisor = 0; - info->close_delay = 5 * HZ / 10; - info->closing_wait = CLOSING_WAIT_DELAY; - info->icount.cts = info->icount.dsr = - info->icount.rng = info->icount.dcd = 0; - info->icount.rx = info->icount.tx = 0; - info->icount.frame = info->icount.parity = 0; - info->icount.overrun = info->icount.brk = 0; - chip_number = (port - cinfo->first_line) / 4; - if ((info->chip_rev = - readb(cinfo->base_addr + - (cy_chip_offset[chip_number] << - index) + (CyGFRCR << index))) >= - CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - info->tbpr = baud_bpr_60[13]; /* Tx BPR */ - info->tco = baud_co_60[13]; /* Tx CO */ - info->rbpr = baud_bpr_60[13]; /* Rx BPR */ - info->rco = baud_co_60[13]; /* Rx CO */ - info->rflow = 0; - info->rtsdtr_inv = 1; - } else { - info->tbpr = baud_bpr_25[13]; /* Tx BPR */ - info->tco = baud_co_25[13]; /* Tx CO */ - info->rbpr = baud_bpr_25[13]; /* Rx BPR */ - info->rco = baud_co_25[13]; /* Rx CO */ - info->rflow = 0; - info->rtsdtr_inv = 0; - } - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - info->default_threshold = 0; - info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->shutdown_wait); - init_waitqueue_head(&info->delta_msr_wait); - /* info->session */ - /* info->pgrp */ - info->read_status_mask = - CyTIMEOUT | CySPECHAR | CyBREAK - | CyPARITY | CyFRAME | CyOVERRUN; - /* info->timeout */ - } - } - } - -#ifndef CONFIG_CYZ_INTR - if (number_z_boards) { - mod_timer(&cyz_timerlist, jiffies + 1); -#ifdef CY_PCI_DEBUG - printk("Cyclades-Z polling initialized\n"); -#endif - } -#endif /* CONFIG_CYZ_INTR */ + for (i = 0; i < cy_nboard; i++) + cy_init_card(&cy_card[i], i); return 0; |
