diff options
Diffstat (limited to 'drivers/bluetooth')
| -rw-r--r-- | drivers/bluetooth/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/bluetooth/Makefile | 1 | ||||
| -rw-r--r-- | drivers/bluetooth/btwilink.c | 395 |
3 files changed, 406 insertions, 0 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 02deef4..8e0de9a 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -219,4 +219,14 @@ config BT_ATH3K Say Y here to compile support for "Atheros firmware download driver" into the kernel or say M to compile it as module (ath3k). +config BT_WILINK + tristate "Texas Instruments WiLink7 driver" + depends on TI_ST + help + This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS + combo devices. This makes use of shared transport line discipline + core driver to communicate with the BT core of the combo chip. + + Say Y here to compile support for Texas Instrument's WiLink7 driver + into the kernel or say M to compile it as module. endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 71bdf13..f4460f4 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o obj-$(CONFIG_BT_ATH3K) += ath3k.o obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o +obj-$(CONFIG_BT_WILINK) += btwilink.o btmrvl-y := btmrvl_main.o btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c new file mode 100644 index 0000000..65d27af --- /dev/null +++ b/drivers/bluetooth/btwilink.c @@ -0,0 +1,395 @@ +/* + * Texas Instrument's Bluetooth Driver For Shared Transport. + * + * Bluetooth Driver acts as interface between HCI core and + * TI Shared Transport Layer. + * + * Copyright (C) 2009-2010 Texas Instruments + * Author: Raja Mani <raja_mani@ti.com> + * Pavan Savoy <pavan_savoy@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#define DEBUG +#include <linux/platform_device.h> +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> +#include <net/bluetooth/hci.h> + +#include <linux/ti_wilink_st.h> + +/* Bluetooth Driver Version */ +#define VERSION "1.0" +#define MAX_BT_CHNL_IDS 3 + +/* Number of seconds to wait for registration completion + * when ST returns PENDING status. + */ +#define BT_REGISTER_TIMEOUT 6000 /* 6 sec */ + +/** + * struct ti_st - driver operation structure + * @hdev: hci device pointer which binds to bt driver + * @reg_status: ST registration callback status + * @st_write: write function provided by the ST driver + * to be used by the driver during send_frame. + * @wait_reg_completion - completion sync between ti_st_open + * and st_reg_completion_cb. + */ +struct ti_st { + struct hci_dev *hdev; + char reg_status; + long (*st_write) (struct sk_buff *); + struct completion wait_reg_completion; +}; + +/* Increments HCI counters based on pocket ID (cmd,acl,sco) */ +static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type) +{ + struct hci_dev *hdev = hst->hdev; + + /* Update HCI stat counters */ + switch (pkt_type) { + case HCI_COMMAND_PKT: + hdev->stat.cmd_tx++; + break; + + case HCI_ACLDATA_PKT: + hdev->stat.acl_tx++; + break; + + case HCI_SCODATA_PKT: + hdev->stat.sco_tx++; + break; + } +} + +/* ------- Interfaces to Shared Transport ------ */ + +/* Called by ST layer to indicate protocol registration completion + * status.ti_st_open() function will wait for signal from this + * API when st_register() function returns ST_PENDING. + */ +static void st_reg_completion_cb(void *priv_data, char data) +{ + struct ti_st *lhst = priv_data; + + /* Save registration status for use in ti_st_open() */ + lhst->reg_status = data; + /* complete the wait in ti_st_open() */ + complete(&lhst->wait_reg_completion); +} + +/* Called by Shared Transport layer when receive data is + * available */ +static long st_receive(void *priv_data, struct sk_buff *skb) +{ + struct ti_st *lhst = priv_data; + int err; + + if (!skb) + return -EFAULT; + + if (!lhst) { + kfree_skb(skb); + return -EFAULT; + } + + skb->dev = (void *) lhst->hdev; + + /* Forward skb to HCI core layer */ + err = hci_recv_frame(skb); + if (err < 0) { + BT_ERR("Unable to push skb to HCI core(%d)", err); + return err; + } + + lhst->hdev->stat.byte_rx += skb->len; + + return 0; +} + +/* ------- Interfaces to HCI layer ------ */ +/* protocol structure registered with shared transport */ +static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = { + { + .chnl_id = HCI_ACLDATA_PKT, /* ACL */ + .hdr_len = sizeof(struct hci_acl_hdr), + .offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen), + .len_size = 2, /* sizeof(dlen) in struct hci_acl_hdr */ + .reserve = 8, + }, + { + .chnl_id = HCI_SCODATA_PKT, /* SCO */ + .hdr_len = sizeof(struct hci_sco_hdr), + .offset_len_in_hdr = offsetof(struct hci_sco_hdr, dlen), + .len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */ + .reserve = 8, + }, + { + .chnl_id = HCI_EVENT_PKT, /* HCI Events */ + .hdr_len = sizeof(struct hci_event_hdr), + .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen), + .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */ + .reserve = 8, + }, +}; + +/* Called from HCI core to initialize the device */ +static int ti_st_open(struct hci_dev *hdev) +{ + unsigned long timeleft; + struct ti_st *hst; + int err, i; + + BT_DBG("%s %p", hdev->name, hdev); + + if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) + return -EBUSY; + + /* provide contexts for callbacks from ST */ + hst = hdev->driver_data; + + for (i = 0; i < MAX_BT_CHNL_IDS; i++) { + ti_st_proto[i].priv_data = hst; + ti_st_proto[i].max_frame_size = HCI_MAX_FRAME_SIZE; + ti_st_proto[i].recv = st_receive; + ti_st_proto[i].reg_complete_cb = st_reg_completion_cb; + + /* Prepare wait-for-completion handler */ + init_completion(&hst->wait_reg_completion); + /* Reset ST registration callback status flag, + * this value will be updated in + * st_reg_completion_cb() + * function whenever it called from ST driver. + */ + hst->reg_status = -EINPROGRESS; + + err = st_register(&ti_st_proto[i]); + if (!err) + goto done; + + if (err != -EINPROGRESS) { + clear_bit(HCI_RUNNING, &hdev->flags); + BT_ERR("st_register failed %d", err); + return err; + } + + /* ST is busy with either protocol + * registration or firmware download. + */ + BT_DBG("waiting for registration " + "completion signal from ST"); + timeleft = wait_for_completion_timeout + (&hst->wait_reg_completion, + msecs_to_jiffies(BT_REGISTER_TIMEOUT)); + if (!timeleft) { + clear_bit(HCI_RUNNING, &hdev->flags); + BT_ERR("Timeout(%d sec),didn't get reg " + "completion signal from ST", + BT_REGISTER_TIMEOUT / 1000); + return -ETIMEDOUT; + } + + /* Is ST registration callback + * called with ERROR status? */ + if (hst->reg_status != 0) { + clear_bit(HCI_RUNNING, &hdev->flags); + BT_ERR("ST registration completed with invalid " + "status %d", hst->reg_status); + return -EAGAIN; + } + +done: + hst->st_write = ti_st_proto[i].write; + if (!hst->st_write) { + BT_ERR("undefined ST write function"); + clear_bit(HCI_RUNNING, &hdev->flags); + for (i = 0; i < MAX_BT_CHNL_IDS; i++) { + /* Undo registration with ST */ + err = st_unregister(&ti_st_proto[i]); + if (err) + BT_ERR("st_unregister() failed with " + "error %d", err); + hst->st_write = NULL; + } + return -EIO; + } + } + return 0; +} + +/* Close device */ +static int ti_st_close(struct hci_dev *hdev) +{ + int err, i; + struct ti_st *hst = hdev->driver_data; + + if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) + return 0; + + for (i = 0; i < MAX_BT_CHNL_IDS; i++) { + err = st_unregister(&ti_st_proto[i]); + if (err) + BT_ERR("st_unregister(%d) failed with error %d", + ti_st_proto[i].chnl_id, err); + } + + hst->st_write = NULL; + + return err; +} + +static int ti_st_send_frame(struct sk_buff *skb) +{ + struct hci_dev *hdev; + struct ti_st *hst; + long len; + + hdev = (struct hci_dev *)skb->dev; + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return -EBUSY; + + hst = hdev->driver_data; + + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); + + BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type, + skb->len); + + /* Insert skb to shared transport layer's transmit queue. + * Freeing skb memory is taken care in shared transport layer, + * so don't free skb memory here. + */ + len = hst->st_write(skb); + if (len < 0) { + kfree_skb(skb); + BT_ERR("ST write failed (%ld)", len); + /* Try Again, would only fail if UART has gone bad */ + return -EAGAIN; + } + + /* ST accepted our skb. So, Go ahead and do rest */ + hdev->stat.byte_tx += len; + ti_st_tx_complete(hst, bt_cb(skb)->pkt_type); + + return 0; +} + +static void ti_st_destruct(struct hci_dev *hdev) +{ + BT_DBG("%s", hdev->name); + /* do nothing here, since platform remove + * would free the hdev->driver_data + */ +} + +static int bt_ti_probe(struct platform_device *pdev) +{ + static struct ti_st *hst; + struct hci_dev *hdev; + int err; + + hst = kzalloc(sizeof(struct ti_st), GFP_KERNEL); + if (!hst) + return -ENOMEM; + + /* Expose "hciX" device to user space */ + hdev = hci_alloc_dev(); + if (!hdev) { + kfree(hst); + return -ENOMEM; + } + + BT_DBG("hdev %p", hdev); + + hst->hdev = hdev; + hdev->bus = HCI_UART; + hdev->driver_data = hst; + hdev->open = ti_st_open; + hdev->close = ti_st_close; + hdev->flush = NULL; + hdev->send = ti_st_send_frame; + hdev->destruct = ti_st_destruct; + hdev->owner = THIS_MODULE; + + err = hci_register_dev(hdev); + if (err < 0) { + BT_ERR("Can't register HCI device error %d", err); + kfree(hst); + hci_free_dev(hdev); + return err; + } + + BT_DBG("HCI device registered (hdev %p)", hdev); + + dev_set_drvdata(&pdev->dev, hst); + return err; +} + +static int bt_ti_remove(struct platform_device *pdev) +{ + struct hci_dev *hdev; + struct ti_st *hst = dev_get_drvdata(&pdev->dev); + + if (!hst) + return -EFAULT; + + BT_DBG("%s", hst->hdev->name); + + hdev = hst->hdev; + ti_st_close(hdev); + hci_unregister_dev(hdev); + + hci_free_dev(hdev); + kfree(hst); + + dev_set_drvdata(&pdev->dev, NULL); + return 0; +} + +static struct platform_driver btwilink_driver = { + .probe = bt_ti_probe, + .remove = bt_ti_remove, + .driver = { + .name = "btwilink", + .owner = THIS_MODULE, + }, +}; + +/* ------- Module Init/Exit interfaces ------ */ +static int __init btwilink_init(void) +{ + BT_INFO("Bluetooth Driver for TI WiLink - Version %s", VERSION); + + return platform_driver_register(&btwilink_driver); +} + +static void __exit btwilink_exit(void) +{ + platform_driver_unregister(&btwilink_driver); +} + +module_init(btwilink_init); +module_exit(btwilink_exit); + +/* ------ Module Info ------ */ + +MODULE_AUTHOR("Raja Mani <raja_mani@ti.com>"); +MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); |
