diff options
Diffstat (limited to 'drivers/block/paride/fit3.c')
| -rw-r--r-- | drivers/block/paride/fit3.c | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/drivers/block/paride/fit3.c b/drivers/block/paride/fit3.c new file mode 100644 index 0000000..15400e7 --- /dev/null +++ b/drivers/block/paride/fit3.c @@ -0,0 +1,211 @@ +/* + fit3.c (c) 1998 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + fit3.c is a low-level protocol driver for newer models + of the Fidelity International Technology parallel port adapter. + This adapter is used in their TransDisk 3000 portable + hard-drives, as well as CD-ROM, PD-CD and other devices. + + The TD-2000 and certain older devices use a different protocol. + Try the fit2 protocol module with them. + + NB: The FIT adapters do not appear to support the control + registers. So, we map ALT_STATUS to STATUS and NO-OP writes + to the device control register - this means that IDE reset + will not work on these devices. + +*/ + +#define FIT3_VERSION "1.0" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0)) + +#define w7(byte) {out_p(7,byte);} +#define r7() (in_p(7) & 0xff) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set + +*/ + +static void fit3_write_regr( PIA *pi, int cont, int regr, int val) + +{ if (cont == 1) return; + + switch (pi->mode) { + + case 0: + case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc); + w0(val); w2(0xd); + w0(0); w2(0xc); + break; + + case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc); + w4(val); w4(0); + w2(0xc); + break; + + } +} + +static int fit3_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b; + + if (cont) { + if (regr != 6) return 0xff; + regr = 7; + } + + switch (pi->mode) { + + case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc); + w2(0xd); a = r1(); + w2(0xf); b = r1(); + w2(0xc); + return j44(a,b); + + case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc); + w2(0xec); w2(0xee); w2(0xef); a = r0(); + w2(0xc); + return a; + + case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc); + w2(0xec); + a = r4(); b = r4(); + w2(0xc); + return a; + + } + return -1; + +} + +static void fit3_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b, c, d; + + switch (pi->mode) { + + case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc); + for (k=0;k<count/2;k++) { + w2(0xd); a = r1(); + w2(0xf); b = r1(); + w2(0xc); c = r1(); + w2(0xe); d = r1(); + buf[2*k ] = j44(a,b); + buf[2*k+1] = j44(c,d); + } + w2(0xc); + break; + + case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc); + w2(0xec); w2(0xee); + for (k=0;k<count/2;k++) { + w2(0xef); a = r0(); + w2(0xee); b = r0(); + buf[2*k ] = a; + buf[2*k+1] = b; + } + w2(0xec); + w2(0xc); + break; + + case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc); + w2(0xec); + for (k=0;k<count;k++) buf[k] = r4(); + w2(0xc); + break; + + } +} + +static void fit3_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch (pi->mode) { + + case 0: + case 1: w2(0xc); w0(0); w2(0x8); w2(0xc); + for (k=0;k<count/2;k++) { + w0(buf[2*k ]); w2(0xd); + w0(buf[2*k+1]); w2(0xc); + } + break; + + case 2: w2(0xc); w0(0); w2(0x8); w2(0xc); + for (k=0;k<count;k++) w4(buf[k]); + w2(0xc); + break; + } +} + +static void fit3_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(0xc); w0(0); w2(0xa); + if (pi->mode == 2) { + w2(0xc); w0(0x9); w2(0x8); w2(0xc); + } +} + +static void fit3_disconnect ( PIA *pi ) + +{ w2(0xc); w0(0xa); w2(0x8); w2(0xc); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void fit3_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[3] = {"4-bit","8-bit","EPP"}; + + printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, " + "mode %d (%s), delay %d\n", + pi->device,FIT3_VERSION,pi->port, + pi->mode,mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol fit3 = { + .owner = THIS_MODULE, + .name = "fit3", + .max_mode = 3, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = fit3_write_regr, + .read_regr = fit3_read_regr, + .write_block = fit3_write_block, + .read_block = fit3_read_block, + .connect = fit3_connect, + .disconnect = fit3_disconnect, + .log_adapter = fit3_log_adapter, +}; + +static int __init fit3_init(void) +{ + return pi_register(&fit3)-1; +} + +static void __exit fit3_exit(void) +{ + pi_unregister(&fit3); +} + +MODULE_LICENSE("GPL"); +module_init(fit3_init) +module_exit(fit3_exit) |
