diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/ahci_da850.c | 114 |
3 files changed, 124 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 12767ad..6e3be7d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM If unsure, say N. +config AHCI_DA850 + tristate "DaVinci DA850 AHCI SATA support" + depends on ARCH_DAVINCI_DA850 + help + This option enables support for the DaVinci DA850 SoC's + onboard AHCI SATA. + + If unsure, say N. + config AHCI_ST tristate "ST AHCI SATA support" depends on ARCH_STI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 5fa79ab..44c8016 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o +obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c new file mode 100644 index 0000000..2c83613 --- /dev/null +++ b/drivers/ata/ahci_da850.c @@ -0,0 +1,114 @@ +/* + * DaVinci DA850 AHCI SATA platform driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/libata.h> +#include <linux/ahci_platform.h> +#include "ahci.h" + +/* SATA PHY Control Register offset from AHCI base */ +#define SATA_P0PHYCR_REG 0x178 + +#define SATA_PHY_MPY(x) ((x) << 0) +#define SATA_PHY_LOS(x) ((x) << 6) +#define SATA_PHY_RXCDR(x) ((x) << 10) +#define SATA_PHY_RXEQ(x) ((x) << 13) +#define SATA_PHY_TXSWING(x) ((x) << 19) +#define SATA_PHY_ENPLL(x) ((x) << 31) + +/* + * The multiplier needed for 1.5GHz PLL output. + * + * NOTE: This is currently hardcoded to be suitable for 100MHz crystal + * frequency (which is used by DA850 EVM board) and may need to be changed + * if you would like to use this driver on some other board. + */ +#define DA850_SATA_CLK_MULTIPLIER 7 + +static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg, + void __iomem *ahci_base) +{ + unsigned int val; + + /* Enable SATA clock receiver */ + val = readl(pwrdn_reg); + val &= ~BIT(0); + writel(val, pwrdn_reg); + + val = SATA_PHY_MPY(DA850_SATA_CLK_MULTIPLIER + 1) | SATA_PHY_LOS(1) | + SATA_PHY_RXCDR(4) | SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) | + SATA_PHY_ENPLL(1); + + writel(val, ahci_base + SATA_P0PHYCR_REG); +} + +static const struct ata_port_info ahci_da850_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static int ahci_da850_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct resource *res; + void __iomem *pwrdn_reg; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) + goto disable_resources; + + pwrdn_reg = devm_ioremap(dev, res->start, resource_size(res)); + if (!pwrdn_reg) + goto disable_resources; + + da850_sata_init(dev, pwrdn_reg, hpriv->mmio); + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0); + if (rc) + goto disable_resources; + + return 0; +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend, + ahci_platform_resume); + +static struct platform_driver ahci_da850_driver = { + .probe = ahci_da850_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = "ahci_da850", + .owner = THIS_MODULE, + .pm = &ahci_da850_pm_ops, + }, +}; +module_platform_driver(ahci_da850_driver); + +MODULE_DESCRIPTION("DaVinci DA850 AHCI SATA platform driver"); +MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>"); +MODULE_LICENSE("GPL"); |
