summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig41
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/ahci.c28
-rw-r--r--drivers/ata/ata_generic.c5
-rw-r--r--drivers/ata/ata_piix.c6
-rw-r--r--drivers/ata/libata-acpi.c15
-rw-r--r--drivers/ata/libata-core.c7
-rw-r--r--drivers/ata/libata-eh.c94
-rw-r--r--drivers/ata/libata-scsi.c107
-rw-r--r--drivers/ata/libata-sff.c2
-rw-r--r--drivers/ata/pata_ali.c4
-rw-r--r--drivers/ata/pata_cmd64x.c125
-rw-r--r--drivers/ata/pata_cs5520.c39
-rw-r--r--drivers/ata/pata_cs5536.c2
-rw-r--r--drivers/ata/pata_efar.c9
-rw-r--r--drivers/ata/pata_hpt366.c38
-rw-r--r--drivers/ata/pata_hpt37x.c137
-rw-r--r--drivers/ata/pata_hpt3x2n.c40
-rw-r--r--drivers/ata/pata_hpt3x3.c11
-rw-r--r--drivers/ata/pata_it8213.c27
-rw-r--r--drivers/ata/pata_it821x.c2
-rw-r--r--drivers/ata/pata_legacy.c14
-rw-r--r--drivers/ata/pata_marvell.c2
-rw-r--r--drivers/ata/pata_ns87415.c32
-rw-r--r--drivers/ata/pata_oldpiix.c2
-rw-r--r--drivers/ata/pata_piccolo.c140
-rw-r--r--drivers/ata/pata_radisys.c4
-rw-r--r--drivers/ata/pata_rdc.c2
-rw-r--r--drivers/ata/pata_rz1000.c11
-rw-r--r--drivers/ata/pata_sil680.c6
-rw-r--r--drivers/ata/pata_sis.c21
-rw-r--r--drivers/ata/pata_via.c56
-rw-r--r--drivers/ata/sata_fsl.c18
-rw-r--r--drivers/ata/sata_mv.c2
-rw-r--r--drivers/ata/sata_sil24.c9
35 files changed, 802 insertions, 257 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index f2df6e2..676f08b 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig ATA
- tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
+ tristate "Serial ATA and Parallel ATA drivers"
depends on HAS_IOMEM
depends on BLOCK
depends on !(M32R || M68K) || BROKEN
@@ -374,8 +374,8 @@ config PATA_HPT366
If unsure, say N.
config PATA_HPT37X
- tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "HPT 370/370A/371/372/374/302 PATA support"
+ depends on PCI
help
This option enables support for the majority of the later HPT
PATA controllers via the new ATA layer.
@@ -383,8 +383,8 @@ config PATA_HPT37X
If unsure, say N.
config PATA_HPT3X2N
- tristate "HPT 372N/302N PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "HPT 372N/302N PATA support"
+ depends on PCI
help
This option enables support for the N variant HPT PATA
controllers via the new ATA layer
@@ -401,7 +401,7 @@ config PATA_HPT3X3
If unsure, say N.
config PATA_HPT3X3_DMA
- bool "HPT 343/363 DMA support (Experimental)"
+ bool "HPT 343/363 DMA support"
depends on PATA_HPT3X3
help
This option enables DMA support for the HPT343/363
@@ -510,8 +510,8 @@ config PATA_NETCELL
If unsure, say N.
config PATA_NINJA32
- tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "Ninja32/Delkin Cardbus ATA support"
+ depends on PCI
help
This option enables support for the Ninja32, Delkin and
possibly other brands of Cardbus ATA adapter
@@ -573,6 +573,14 @@ config PATA_PCMCIA
If unsure, say N.
+config PATA_PDC2027X
+ tristate "Promise PATA 2027x support"
+ depends on PCI
+ help
+ This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
+
+ If unsure, say N.
+
config PATA_PDC_OLD
tristate "Older Promise PATA controller support"
depends on PCI
@@ -643,14 +651,6 @@ config PATA_SERVERWORKS
If unsure, say N.
-config PATA_PDC2027X
- tristate "Promise PATA 2027x support"
- depends on PCI
- help
- This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
-
- If unsure, say N.
-
config PATA_SIL680
tristate "CMD / Silicon Image 680 PATA support"
depends on PCI
@@ -667,6 +667,15 @@ config PATA_SIS
If unsure, say N.
+config PATA_TOSHIBA
+ tristate "Toshiba Piccolo support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ Support for the Toshiba Piccolo controllers. Currently only the
+ primary channel is supported by this driver.
+
+ If unsure, say N.
+
config PATA_VIA
tristate "VIA PATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 01e126f..d909435 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
+obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o
obj-$(CONFIG_PATA_VIA) += pata_via.o
obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a3241a1..b8bea10 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -113,6 +113,7 @@ enum {
board_ahci_mcp65 = 6,
board_ahci_nopmp = 7,
board_ahci_yesncq = 8,
+ board_ahci_nosntf = 9,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -235,6 +236,7 @@ enum {
AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
link offline */
+ AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
/* ap->flags bits */
@@ -508,7 +510,7 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
- /* board_ahci_yesncq */
+ [board_ahci_yesncq] =
{
AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
.flags = AHCI_FLAG_COMMON,
@@ -516,6 +518,14 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ [board_ahci_nosntf] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
};
static const struct pci_device_id ahci_pci_tbl[] = {
@@ -531,7 +541,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
{ PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
- { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
{ PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
@@ -849,6 +859,12 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
cap &= ~HOST_CAP_PMP;
}
+ if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can't do SNTF, turning off CAP_SNTF\n");
+ cap &= ~HOST_CAP_SNTF;
+ }
+
if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
port_map != 1) {
dev_printk(KERN_INFO, &pdev->dev,
@@ -2988,6 +3004,14 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
return -ENODEV;
+ /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
+ * At the moment, we can only use the AHCI mode. Let the users know
+ * that for SAS drives they're out of luck.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
+ dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
+ "can only drive SATA devices with this driver\n");
+
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index ecfd22b..12e26c3 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -168,9 +168,12 @@ static struct pci_device_id ata_generic[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), },
{ PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), },
{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
- { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
+#if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE)
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), },
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), },
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), },
+#endif
/* Must come last. If you add entries adjust this table appropriately */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
{ 0, },
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 9ac4e37..0c6155f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -869,10 +869,10 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
(timings[pio][1] << 8);
}
- if (ap->udma_mask) {
+ if (ap->udma_mask)
udma_enable &= ~(1 << devid);
- pci_write_config_word(dev, master_port, master_data);
- }
+
+ pci_write_config_word(dev, master_port, master_data);
}
/* Don't scribble on 0x48 if the controller does not support UDMA */
if (ap->udma_mask)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index b0882cd..1245838 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -807,12 +807,11 @@ static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed)
* EH context.
*
* RETURNS:
- * 0 on success, -errno on failure.
+ * 0 on success, -ENOENT if _SDD doesn't exist, -errno on failure.
*/
static int ata_acpi_push_id(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
- int err;
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[1];
@@ -835,12 +834,16 @@ static int ata_acpi_push_id(struct ata_device *dev)
status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
swap_buf_le16(dev->id, ATA_ID_WORDS);
- err = ACPI_FAILURE(status) ? -EIO : 0;
- if (err < 0)
+ if (status == AE_NOT_FOUND)
+ return -ENOENT;
+
+ if (ACPI_FAILURE(status)) {
ata_dev_printk(dev, KERN_WARNING,
"ACPI _SDD failed (AE 0x%x)\n", status);
+ return -EIO;
+ }
- return err;
+ return 0;
}
/**
@@ -971,7 +974,7 @@ int ata_acpi_on_devcfg(struct ata_device *dev)
/* do _SDD if SATA */
if (acpi_sata) {
rc = ata_acpi_push_id(dev);
- if (rc)
+ if (rc && rc != -ENOENT)
goto acpi_err;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dc72690..22ff51b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6616,6 +6616,13 @@ static int __init ata_init(void)
{
ata_parse_force_param();
+ /*
+ * FIXME: In UP case, there is only one workqueue thread and if you
+ * have more than one PIO device, latency is bloody awful, with
+ * occasional multi-second "hiccups" as one PIO device waits for
+ * another. It's an ugly wart that users DO occasionally complain
+ * about; luckily most users have at most one PIO polled device.
+ */
ata_wq = create_workqueue("ata");
if (!ata_wq)
goto free_force_tbl;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index bba2ae5..0ea97c9 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -110,6 +110,13 @@ static const unsigned long ata_eh_identify_timeouts[] = {
ULONG_MAX,
};
+static const unsigned long ata_eh_flush_timeouts[] = {
+ 15000, /* be generous with flush */
+ 15000, /* ditto */
+ 30000, /* and even more generous */
+ ULONG_MAX,
+};
+
static const unsigned long ata_eh_other_timeouts[] = {
5000, /* same rationale as identify timeout */
10000, /* ditto */
@@ -147,6 +154,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
.timeouts = ata_eh_other_timeouts, },
{ .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS),
.timeouts = ata_eh_other_timeouts, },
+ { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT),
+ .timeouts = ata_eh_flush_timeouts },
};
#undef CMDS
@@ -3112,6 +3121,82 @@ static int atapi_eh_clear_ua(struct ata_device *dev)
return 0;
}
+/**
+ * ata_eh_maybe_retry_flush - Retry FLUSH if necessary
+ * @dev: ATA device which may need FLUSH retry
+ *
+ * If @dev failed FLUSH, it needs to be reported upper layer
+ * immediately as it means that @dev failed to remap and already
+ * lost at least a sector and further FLUSH retrials won't make
+ * any difference to the lost sector. However, if FLUSH failed
+ * for other reasons, for example transmission error, FLUSH needs
+ * to be retried.
+ *
+ * This function determines whether FLUSH failure retry is
+ * necessary and performs it if so.
+ *
+ * RETURNS:
+ * 0 if EH can continue, -errno if EH needs to be repeated.
+ */
+static int ata_eh_maybe_retry_flush(struct ata_device *dev)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ata_queued_cmd *qc;
+ struct ata_taskfile tf;
+ unsigned int err_mask;
+ int rc = 0;
+
+ /* did flush fail for this device? */
+ if (!ata_tag_valid(link->active_tag))
+ return 0;
+
+ qc = __ata_qc_from_tag(ap, link->active_tag);
+ if (qc->dev != dev || (qc->tf.command != ATA_CMD_FLUSH_EXT &&
+ qc->tf.command != ATA_CMD_FLUSH))
+ return 0;
+
+ /* if the device failed it, it should be reported to upper layers */
+ if (qc->err_mask & AC_ERR_DEV)
+ return 0;
+
+ /* flush failed for some other reason, give it another shot */
+ ata_tf_init(dev, &tf);
+
+ tf.command = qc->tf.command;
+ tf.flags |= ATA_TFLAG_DEVICE;
+ tf.protocol = ATA_PROT_NODATA;
+
+ ata_dev_printk(dev, KERN_WARNING, "retrying FLUSH 0x%x Emask 0x%x\n",
+ tf.command, qc->err_mask);
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+ if (!err_mask) {
+ /*
+ * FLUSH is complete but there's no way to
+ * successfully complete a failed command from EH.
+ * Making sure retry is allowed at least once and
+ * retrying it should do the trick - whatever was in
+ * the cache is already on the platter and this won't
+ * cause infinite loop.
+ */
+ qc->scsicmd->allowed = max(qc->scsicmd->allowed, 1);
+ } else {
+ ata_dev_printk(dev, KERN_WARNING, "FLUSH failed Emask 0x%x\n",
+ err_mask);
+ rc = -EIO;
+
+ /* if device failed it, report it to upper layers */
+ if (err_mask & AC_ERR_DEV) {
+ qc->err_mask |= AC_ERR_DEV;
+ qc->result_tf = tf;
+ if (!(ap->pflags & ATA_PFLAG_FROZEN))
+ rc = 0;
+ }
+ }
+ return rc;
+}
+
static int ata_link_nr_enabled(struct ata_link *link)
{
struct ata_device *dev;
@@ -3455,6 +3540,15 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
}
}
+ /* retry flush if necessary */
+ ata_for_each_dev(dev, link, ALL) {
+ if (dev->class != ATA_DEV_ATA)
+ continue;
+ rc = ata_eh_maybe_retry_flush(dev);
+ if (rc)
+ goto dev_fail;
+ }
+
/* configure link power saving */
if (ehc->i.action & ATA_EH_LPM)
ata_for_each_dev(dev, link, ALL)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b4ee28d..62e6b9e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -47,6 +47,7 @@
#include <linux/hdreg.h>
#include <linux/uaccess.h>
#include <linux/suspend.h>
+#include <asm/unaligned.h>
#include "libata.h"
@@ -154,8 +155,7 @@ static ssize_t ata_scsi_lpm_put(struct device *dev,
*/
for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) {
const int len = strlen(link_pm_policy[i].name);
- if (strncmp(link_pm_policy[i].name, buf, len) == 0 &&
- buf[len] == '\n') {
+ if (strncmp(link_pm_policy[i].name, buf, len) == 0) {
policy = link_pm_policy[i].value;
break;
}
@@ -1964,6 +1964,7 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf)
0x80, /* page 0x80, unit serial no page */
0x83, /* page 0x83, device ident page */
0x89, /* page 0x89, ata info page */
+ 0xb0, /* page 0xb0, block limits page */
0xb1, /* page 0xb1, block device characteristics page */
};
@@ -2085,6 +2086,43 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
return 0;
}
+static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
+{
+ u32 min_io_sectors;
+
+ rbuf[1] = 0xb0;
+ rbuf[3] = 0x3c; /* required VPD size with unmap support */
+
+ /*
+ * Optimal transfer length granularity.
+ *
+ * This is always one physical block, but for disks with a smaller
+ * logical than physical sector size we need to figure out what the
+ * latter is.
+ */
+ if (ata_id_has_large_logical_sectors(args->id))
+ min_io_sectors = ata_id_logical_per_physical_sectors(args->id);
+ else
+ min_io_sectors = 1;
+ put_unaligned_be16(min_io_sectors, &rbuf[6]);
+
+ /*
+ * Optimal unmap granularity.
+ *
+ * The ATA spec doesn't even know about a granularity or alignment
+ * for the TRIM command. We can leave away most of the unmap related
+ * VPD page entries, but we have specifify a granularity to signal
+ * that we support some form of unmap - in thise case via WRITE SAME
+ * with the unmap bit set.
+ */
+ if (ata_id_has_trim(args->id)) {
+ put_unaligned_be32(65535 * 512 / 8, &rbuf[20]);
+ put_unaligned_be32(1, &rbuf[28]);
+ }
+
+ return 0;
+}
+
static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
{
int form_factor = ata_id_form_factor(args->id);
@@ -2374,6 +2412,13 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
rbuf[13] = log_per_phys;
rbuf[14] = (lowest_aligned >> 8) & 0x3f;
rbuf[15] = lowest_aligned;
+
+ if (ata_id_has_trim(args->id)) {
+ rbuf[14] |= 0x80; /* TPE */
+
+ if (ata_id_has_zero_after_trim(args->id))
+ rbuf[14] |= 0x40; /* TPRZ */
+ }
}
return 0;
@@ -2896,6 +2941,58 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
return 1;
}
+static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &qc->tf;
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ struct ata_device *dev = qc->dev;
+ const u8 *cdb = scmd->cmnd;
+ u64 block;
+ u32 n_block;
+ u32 size;
+ void *buf;
+
+ /* we may not issue DMA commands if no DMA mode is set */
+ if (unlikely(!dev->dma_mode))
+ goto invalid_fld;
+
+ if (unlikely(scmd->cmd_len < 16))
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+
+ /* for now we only support WRITE SAME with the unmap bit set */
+ if (unlikely(!(cdb[1] & 0x8)))
+ goto invalid_fld;
+
+ /*
+ * WRITE SAME always has a sector sized buffer as payload, this
+ * should never be a multiple entry S/G list.
+ */
+ if (!scsi_sg_count(scmd))
+ goto invalid_fld;
+
+ buf = page_address(sg_page(scsi_sglist(scmd)));
+ size = ata_set_lba_range_entries(buf, 512, block, n_block);
+
+ tf->protocol = ATA_PROT_DMA;
+ tf->hob_feature = 0;
+ tf->feature = ATA_DSM_TRIM;
+ tf->hob_nsect = (size / 512) >> 8;
+ tf->nsect = size / 512;
+ tf->command = ATA_CMD_DSM;
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
+ ATA_TFLAG_WRITE;
+
+ ata_qc_set_pc_nbytes(qc);
+
+ return 0;
+
+ invalid_fld:
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00);
+ /* "Invalid field in cdb" */
+ return 1;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
@@ -2920,6 +3017,9 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
case WRITE_16:
return ata_scsi_rw_xlat;
+ case 0x93 /*WRITE_SAME_16*/:
+ return ata_scsi_write_same_xlat;
+
case SYNCHRONIZE_CACHE:
if (ata_try_flush_cache(dev))
return ata_scsi_flush_xlat;
@@ -3109,6 +3209,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
case 0x89:
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89);
break;
+ case 0xb0:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b0);
+ break;
case 0xb1:
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1);
break;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index bbbb1fa..51eb1e2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2384,7 +2384,7 @@ void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
ap->hsm_task_state = HSM_ST_IDLE;
if (ap->ioaddr.bmdma_addr)
- ata_bmdma_stop(qc);
+ ap->ops->bmdma_stop(qc);
spin_unlock_irqrestore(ap->lock, flags);
}
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 1432dc9..9434114 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -453,7 +453,9 @@ static void ali_init_chipset(struct pci_dev *pdev)
/* Clear CD-ROM DMA write bit */
tmp &= 0x7F;
/* Cable and UDMA */
- pci_write_config_byte(pdev, 0x4B, tmp | 0x09);
+ if (pdev->revision >= 0xc2)
+ tmp |= 0x01;
+ pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
/*
* CD_ROM DMA on (0x53 bit 0). Enable this even if we want
* to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index f98dffe..dadfc35 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -31,7 +31,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.3.1"
/*
* CMD64x specific registers definition.
@@ -254,17 +254,109 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc)
}
/**
- * cmd646r1_dma_stop - DMA stop callback
+ * cmd64x_bmdma_stop - DMA stop callback
* @qc: Command in progress
*
- * Stub for now while investigating the r1 quirk in the old driver.
+ * Track the completion of live DMA commands and clear the
+ * host->private_data DMA tracking flag as we do.
*/
-static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
+static void cmd64x_bmdma_stop(struct ata_queued_cmd *qc)
{
+ struct ata_port *ap = qc->ap;
ata_bmdma_stop(qc);
+ WARN_ON(ap->host->private_data != ap);
+ ap->host->private_data = NULL;
}
+/**
+ * cmd64x_qc_defer - Defer logic for chip limits
+ * @qc: queued command
+ *
+ * Decide whether we can issue the command. Called under the host lock.
+ */
+
+static int cmd64x_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_host *host = qc->ap->host;
+ struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
+ int rc;
+ int dma = 0;
+
+ /* Apply the ATA rules first */
+ rc = ata_std_qc_defer(qc);
+ if (rc)
+ return rc;
+
+ if (qc->tf.protocol == ATAPI_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_DMA)
+ dma = 1;
+
+ /* If the other port is not live then issue the command */
+ if (alt == NULL || !alt->qc_active) {
+ if (dma)
+ host->private_data = qc->ap;
+ return 0;
+ }
+ /* If there is a live DMA command then wait */
+ if (host->private_data != NULL)
+ return ATA_DEFER_PORT;
+ if (dma)
+ /* Cannot overlap our DMA command */
+ return ATA_DEFER_PORT;
+ return 0;
+}
+
+/**
+ * cmd64x_interrupt - ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host information structure
+ *
+ * Our interrupt handler for PCI IDE devices. Calls
+ * ata_sff_host_intr() for each port that is flagging an IRQ. We cannot
+ * use the defaults as we need to avoid touching status/altstatus during
+ * a DMA.
+ *
+ * LOCKING:
+ * Obtains host lock during operation.
+ *
+ * RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t cmd64x_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ unsigned int i;
+ unsigned int handled = 0;
+ unsigned long flags;
+ static const u8 irq_reg[2] = { CFR, ARTTIM23 };
+ static const u8 irq_mask[2] = { 1 << 2, 1 << 4 };
+
+ /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
+ spin_lock_irqsave(&host->lock, flags);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+ u8 reg;
+
+ pci_read_config_byte(pdev, irq_reg[i], &reg);
+ ap = host->ports[i];
+ if (ap && (reg & irq_mask[i]) &&
+ !(ap->flags & ATA_FLAG_DISABLED)) {
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+ (qc->flags & ATA_QCFLAG_ACTIVE))
+ handled |= ata_sff_host_intr(ap, qc);
+ }
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return IRQ_RETVAL(handled);
+}
static struct scsi_host_template cmd64x_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
@@ -273,6 +365,8 @@ static const struct ata_port_operations cmd64x_base_ops = {
.inherits = &ata_bmdma_port_ops,
.set_piomode = cmd64x_set_piomode,
.set_dmamode = cmd64x_set_dmamode,
+ .bmdma_stop = cmd64x_bmdma_stop,
+ .qc_defer = cmd64x_qc_defer,
};
static struct ata_port_operations cmd64x_port_ops = {
@@ -282,7 +376,6 @@ static struct ata_port_operations cmd64x_port_ops = {
static struct ata_port_operations cmd646r1_port_ops = {
.inherits = &cmd64x_base_ops,
- .bmdma_stop = cmd646r1_bmdma_stop,
.cable_detect = ata_cable_40wire,
};
@@ -290,12 +383,11 @@ static struct ata_port_operations cmd648_port_ops = {
.inherits = &cmd64x_base_ops,
.bmdma_stop = cmd648_bmdma_stop,
.cable_detect = cmd648_cable_detect,
+ .qc_defer = ata_std_qc_defer
};
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- u32 class_rev;
-
static const struct ata_port_info cmd_info[6] = {
{ /* CMD 643 - no UDMA */
.flags = ATA_FLAG_SLAVE_POSS,
@@ -340,40 +432,43 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
u8 mrdmode;
int rc;
+ struct ata_host *host;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
- pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xFF;
-
if (id->driver_data == 0) /* 643 */
ata_pci_bmdma_clear_simplex(pdev);
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
- if (class_rev > 4)
+ if (pdev->revision > 4)
ppi[0] = &cmd_info[2];
/* Early rev with other problems ? */
- else if (class_rev == 1)
+ else if (pdev->revision == 1)
ppi[0] = &cmd_info[3];
}
+
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
pci_read_config_byte(pdev, MRDMODE, &mrdmode);
mrdmode &= ~ 0x30; /* IRQ set up */
mrdmode |= 0x02; /* Memory read line enable */
pci_write_config_byte(pdev, MRDMODE, mrdmode);
- /* Force PIO 0 here.. */
-
/* PPC specific fixup copied from old driver */
#ifdef CONFIG_PPC
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (rc)
+ return rc;
+ /* We use this pointer to track the AP which has DMA running */
+ host->private_data = NULL;
- return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
+ pci_set_master(pdev);
+ return ata_pci_sff_activate_host(host, cmd64x_interrupt, &cmd64x_sht);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 0df83cf..95ebdac 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -90,48 +90,12 @@ static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int
}
/**
- * cs5520_enable_dma - turn on DMA bits
- *
- * Turn on the DMA bits for this disk. Needed because the BIOS probably
- * has not done the work for us. Belongs in the core SATA code.
- */
-
-static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev)
-{
- /* Set the DMA enable/disable flag */
- u8 reg = ioread8(ap->ioaddr.bmdma_addr + 0x02);
- reg |= 1<<(adev->devno + 5);
- iowrite8(reg, ap->ioaddr.bmdma_addr + 0x02);
-}
-
-/**
- * cs5520_set_dmamode - program DMA timings
- * @ap: ATA port
- * @adev: ATA device
- *
- * Program the DMA mode timings for the controller according to the pio
- * clocking table. Note that this device sets the DMA timings to PIO
- * mode values. This may seem bizarre but the 5520 architecture talks
- * PIO mode to the disk and DMA mode to the controller so the underlying
- * transfers are PIO timed.
- */
-
-static void cs5520_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-{
- static const int dma_xlate[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 };
- cs5520_set_timings(ap, adev, dma_xlate[adev->dma_mode]);
- cs5520_enable_dma(ap, adev);
-}
-
-/**
* cs5520_set_piomode - program PIO timings
* @ap: ATA port
* @adev: ATA device
*
* Program the PIO mode timings for the controller according to the pio
- * clocking table. We know pio_mode will equal dma_mode because of the
- * CS5520 architecture. At least once we turned DMA on and wrote a
- * mode setter.
+ * clocking table.
*/
static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -149,7 +113,6 @@ static struct ata_port_operations cs5520_port_ops = {
.qc_prep = ata_sff_dumb_qc_prep,
.cable_detect = ata_cable_40wire,
.set_piomode = cs5520_set_piomode,
- .set_dmamode = cs5520_set_dmamode,
};
static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 6da4cb4..ffee397 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -224,7 +224,7 @@ static struct scsi_host_template cs5536_sht = {
};
static struct ata_port_operations cs5536_port_ops = {
- .inherits = &ata_bmdma_port_ops,
+ .inherits = &ata_bmdma32_port_ops,
.cable_detect = cs5536_cable_detect,
.set_piomode = cs5536_set_piomode,
.set_dmamode = cs5536_set_dmamode,
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 2a6412f..b2e71e6 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -2,6 +2,7 @@
* pata_efar.c - EFAR PIIX clone controller driver
*
* (C) 2005 Red Hat
+ * (C) 2009 Bartlomiej Zolnierkiewicz
*
* Some parts based on ata_piix.c by Jeff Garzik and others.
*
@@ -118,12 +119,12 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
int shift = 4 * ap->port_no;
u8 slave_data;
- idetm_data &= 0xCC0F;
+ idetm_data &= 0xFF0F;
idetm_data |= (control << 4);
/* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= 0x0F << shift;
+ slave_data &= ap->port_no ? 0x0F : 0xF0;
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;
pci_write_config_byte(dev, 0x44, slave_data);
}
@@ -200,7 +201,7 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev)
master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
master_data |= control << 4;
pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= (0x0F + 0xE1 * ap->port_no);
+ slave_data &= ap->port_no ? 0x0F : 0xF0;
/* Load the matching timing */
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
pci_write_config_byte(dev, 0x44, slave_data);
@@ -251,7 +252,7 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
+ .mwdma_mask = ATA_MWDMA12_ONLY,
.udma_mask = ATA_UDMA4,
.port_ops = &efar_ops,
};
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index d7f2da1..0bd48e8 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.6.2"
+#define DRV_VERSION "0.6.7"
struct hpt_clock {
u8 xfer_mode;
@@ -36,24 +36,22 @@ struct hpt_clock {
/* key for bus clock timings
* bit
- * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
- * DMA. cycles = value + 1
- * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW
- * DMA. cycles = value + 1
- * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file
+ * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 4:7 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 8:11 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
* register access.
- * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file
+ * 12:15 cmd_low_time. Active time of DIOW_/DIOR_ during task file
* register access.
- * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer.
- * during task file register access.
- * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA
- * xfer.
- * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task
+ * 16:18 udma_cycle_time. Clock cycles for UDMA xfer?
+ * 19:21 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer.
+ * 22:24 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file
* register access.
- * 28 UDMA enable
- * 29 DMA enable
- * 30 PIO_MST enable. if set, the chip is in bus master mode during
- * PIO.
+ * 28 UDMA enable.
+ * 29 DMA enable.
+ * 30 PIO_MST enable. If set, the chip is in bus master mode during
+ * PIO xfer.
* 31 FIFO enable.
*/
@@ -344,7 +342,6 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
void *hpriv = NULL;
- u32 class_rev;
u32 reg1;
int rc;
@@ -352,13 +349,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (rc)
return rc;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xFF;
-
/* May be a later chip in disguise. Check */
/* Newer chips are not in the HPT36x driver. Ignore them */
- if (class_rev > 2)
- return -ENODEV;
+ if (dev->revision > 2)
+ return -ENODEV;
hpt36x_init_chipset(dev);
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index d0a7df2..4224cfc 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.12"
+#define DRV_VERSION "0.6.14"
struct hpt_clock {
u8 xfer_speed;
@@ -303,72 +303,79 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
}
/**
- * hpt37x_pre_reset - reset the hpt37x bus
- * @link: ATA link to reset
- * @deadline: deadline jiffies for the operation
+ * hpt37x_cable_detect - Detect the cable type
+ * @ap: ATA port to detect on
*
- * Perform the initial reset handling for the 370/372 and 374 func 0
+ * Return the cable type attached to this port
*/
-static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
+static int hpt37x_cable_detect(struct ata_port *ap)
{
- u8 scr2, ata66;
- struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- static const struct pci_bits hpt37x_enable_bits[] = {
- { 0x50, 1, 0x04, 0x04 },
- { 0x54, 1, 0x04, 0x04 }
- };
- if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
- return -ENOENT;
+ u8 scr2, ata66;
pci_read_config_byte(pdev, 0x5B, &scr2);
pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
+
+ udelay(10); /* debounce */
+
/* Cable register now active */
pci_read_config_byte(pdev, 0x5A, &ata66);
/* Restore state */
pci_write_config_byte(pdev, 0x5B, scr2);
if (ata66 & (2 >> ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
+ return ATA_CBL_PATA40;
else
- ap->cbl = ATA_CBL_PATA80;
-
- /* Reset the state machine */
- pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
- udelay(100);
-
- return ata_sff_prereset(link, deadline);
+ return ATA_CBL_PATA80;
}
-static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
+/**
+ * hpt374_fn1_cable_detect - Detect the cable type
+ * @ap: ATA port to detect on
+ *
+ * Return the cable type attached to this port
+ */
+
+static int hpt374_fn1_cable_detect(struct ata_port *ap)
{
- static const struct pci_bits hpt37x_enable_bits[] = {
- { 0x50, 1, 0x04, 0x04 },
- { 0x54, 1, 0x04, 0x04 }
- };
- u16 mcr3;
- u8 ata66;
- struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int mcrbase = 0x50 + 4 * ap->port_no;
-
- if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
- return -ENOENT;
+ u16 mcr3;
+ u8 ata66;
/* Do the extra channel work */
pci_read_config_word(pdev, mcrbase + 2, &mcr3);
- /* Set bit 15 of 0x52 to enable TCBLID as input
- */
+ /* Set bit 15 of 0x52 to enable TCBLID as input */
pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000);
pci_read_config_byte(pdev, 0x5A, &ata66);
/* Reset TCBLID/FCBLID to output */
pci_write_config_word(pdev, mcrbase + 2, mcr3);
if (ata66 & (2 >> ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
+ return ATA_CBL_PATA40;
else
- ap->cbl = ATA_CBL_PATA80;
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * hpt37x_pre_reset - reset the hpt37x bus
+ * @link: ATA link to reset
+ * @deadline: deadline jiffies for the operation
+ *
+ * Perform the initial reset handling for the HPT37x.
+ */
+
+static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ static const struct pci_bits hpt37x_enable_bits[] = {
+ { 0x50, 1, 0x04, 0x04 },
+ { 0x54, 1, 0x04, 0x04 }
+ };
+ if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
+ return -ENOENT;
/* Reset the state machine */
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
@@ -404,9 +411,8 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->pio_mode);
- mode &= ~0x8000000; /* No FIFO in PIO */
- mode &= ~0x30070000; /* Leave config bits alone */
- reg &= 0x30070000; /* Strip timing bits */
+ mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
+ reg &= ~0xCFC3FFFF; /* Strip timing bits */
pci_write_config_dword(pdev, addr1, reg | mode);
}
@@ -423,8 +429,7 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 addr1, addr2;
- u32 reg;
- u32 mode;
+ u32 reg, mode, mask;
u8 fast;
addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -436,11 +441,12 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
fast |= 0x01;
pci_write_config_byte(pdev, addr2, fast);
+ mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->dma_mode);
- mode |= 0x8000000; /* FIFO in MWDMA or UDMA */
- mode &= ~0xC0000000; /* Leave config bits alone */
- reg &= 0xC0000000; /* Strip timing bits */
+ mode &= mask;
+ reg &= ~mask;
pci_write_config_dword(pdev, addr1, reg | mode);
}
@@ -508,9 +514,8 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev)
mode = hpt37x_find_mode(ap, adev->pio_mode);
printk("Find mode for %d reports %X\n", adev->pio_mode, mode);
- mode &= ~0x80000000; /* No FIFO in PIO */
- mode &= ~0x30070000; /* Leave config bits alone */
- reg &= 0x30070000; /* Strip timing bits */
+ mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
+ reg &= ~0xCFC3FFFF; /* Strip timing bits */
pci_write_config_dword(pdev, addr1, reg | mode);
}
@@ -527,8 +532,7 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 addr1, addr2;
- u32 reg;
- u32 mode;
+ u32 reg, mode, mask;
u8 fast;
addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -539,12 +543,13 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
fast &= ~0x07;
pci_write_config_byte(pdev, addr2, fast);
+ mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt37x_find_mode(ap, adev->dma_mode);
printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode);
- mode &= ~0xC0000000; /* Leave config bits alone */
- mode |= 0x80000000; /* FIFO in MWDMA or UDMA */
- reg &= 0xC0000000; /* Strip timing bits */
+ mode &= mask;
+ reg &= ~mask;
pci_write_config_dword(pdev, addr1, reg | mode);
}
@@ -584,6 +589,7 @@ static struct ata_port_operations hpt370_port_ops = {
.bmdma_stop = hpt370_bmdma_stop,
.mode_filter = hpt370_filter,
+ .cable_detect = hpt37x_cable_detect,
.set_piomode = hpt370_set_piomode,
.set_dmamode = hpt370_set_dmamode,
.prereset = hpt37x_pre_reset,
@@ -608,6 +614,7 @@ static struct ata_port_operations hpt372_port_ops = {
.bmdma_stop = hpt37x_bmdma_stop,
+ .cable_detect = hpt37x_cable_detect,
.set_piomode = hpt372_set_piomode,
.set_dmamode = hpt372_set_dmamode,
.prereset = hpt37x_pre_reset,
@@ -620,7 +627,8 @@ static struct ata_port_operations hpt372_port_ops = {
static struct ata_port_operations hpt374_fn1_port_ops = {
.inherits = &hpt372_port_ops,
- .prereset = hpt374_fn1_pre_reset,
+ .cable_detect = hpt374_fn1_cable_detect,
+ .prereset = hpt37x_pre_reset,
};
/**
@@ -791,9 +799,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
static const int MHz[4] = { 33, 40, 50, 66 };
void *private_data = NULL;
const struct ata_port_info *ppi[] = { NULL, NULL };
-
+ u8 rev = dev->revision;
u8 irqmask;
- u32 class_rev;
u8 mcr1;
u32 freq;
int prefer_dpll = 1;
@@ -808,19 +815,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (rc)
return rc;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xFF;
-
if (dev->device == PCI_DEVICE_ID_TTI_HPT366) {
/* May be a later chip in disguise. Check */
/* Older chips are in the HPT366 driver. Ignore them */
- if (class_rev < 3)
+ if (rev < 3)
return -ENODEV;
/* N series chips have their own driver. Ignore */
- if (class_rev == 6)
+ if (rev == 6)
return -ENODEV;
- switch(class_rev) {
+ switch(rev) {
case 3:
ppi[0] = &info_hpt370;
chip_table = &hpt370;
@@ -836,28 +840,29 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
chip_table = &hpt372;
break;
default:
- printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype please report (%d).\n", class_rev);
+ printk(KERN_ERR "pata_hpt37x: Unknown HPT366 "
+ "subtype, please report (%d).\n", rev);
return -ENODEV;
}
} else {
switch(dev->device) {
case PCI_DEVICE_ID_TTI_HPT372:
/* 372N if rev >= 2*/
- if (class_rev >= 2)
+ if (rev >= 2)
return -ENODEV;
ppi[0] = &info_hpt372;
chip_table = &hpt372a;
break;
case PCI_DEVICE_ID_TTI_HPT302:
/* 302N if rev > 1 */
- if (class_rev > 1)
+ if (rev > 1)
return -ENODEV;
ppi[0] = &info_hpt372;
/* Check this */
chip_table = &hpt302;
break;
case PCI_DEVICE_ID_TTI_HPT371:
- if (class_rev > 1)
+ if (rev > 1)
return -ENODEV;
ppi[0] = &info_hpt372;
chip_table = &hpt371;
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 3d59fe0..9a09a1b 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.4"
+#define DRV_VERSION "0.3.7"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -80,14 +80,13 @@ static struct hpt_clock hpt3x2n_clocks[] = {
{ XFER_MW_DMA_2, 0x2c829c62 },
{ XFER_MW_DMA_1, 0x2c829c66 },
- { XFER_MW_DMA_0, 0x2c829d2c },
+ { XFER_MW_DMA_0, 0x2c829d2e },
{ XFER_PIO_4, 0x0c829c62 },
{ XFER_PIO_3, 0x0c829c84 },
{ XFER_PIO_2, 0x0c829ca6 },
{ XFER_PIO_1, 0x0d029d26 },
{ XFER_PIO_0, 0x0d029d5e },
- { 0, 0x0d029d5e }
};
/**
@@ -128,12 +127,15 @@ static int hpt3x2n_cable_detect(struct ata_port *ap)
pci_read_config_byte(pdev, 0x5B, &scr2);
pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
+
+ udelay(10); /* debounce */
+
/* Cable register now active */
pci_read_config_byte(pdev, 0x5A, &ata66);
/* Restore state */
pci_write_config_byte(pdev, 0x5B, scr2);
- if (ata66 & (1 << ap->port_no))
+ if (ata66 & (2 >> ap->port_no))
return ATA_CBL_PATA40;
else
return ATA_CBL_PATA80;
@@ -185,9 +187,8 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt3x2n_find_mode(ap, adev->pio_mode);
- mode &= ~0x8000000; /* No FIFO in PIO */
- mode &= ~0x30070000; /* Leave config bits alone */
- reg &= 0x30070000; /* Strip timing bits */
+ mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
+ reg &= ~0xCFC3FFFF; /* Strip timing bits */
pci_write_config_dword(pdev, addr1, reg | mode);
}
@@ -204,8 +205,7 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 addr1, addr2;
- u32 reg;
- u32 mode;
+ u32 reg, mode, mask;
u8 fast;
addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -216,11 +216,12 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev)
fast &= ~0x07;
pci_write_config_byte(pdev, addr2, fast);
+ mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
pci_read_config_dword(pdev, addr1, &reg);
mode = hpt3x2n_find_mode(ap, adev->dma_mode);
- mode |= 0x8000000; /* FIFO in MWDMA or UDMA */
- mode &= ~0xC0000000; /* Leave config bits alone */
- reg &= 0xC0000000; /* Strip timing bits */
+ mode &= mask;
+ reg &= ~mask;
pci_write_config_dword(pdev, addr1, reg | mode);
}
@@ -447,10 +448,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.port_ops = &hpt3x2n_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
-
+ u8 rev = dev->revision;
u8 irqmask;
- u32 class_rev;
-
unsigned int pci_mhz;
unsigned int f_low, f_high;
int adjust;
@@ -462,26 +461,23 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (rc)
return rc;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xFF;
-
switch(dev->device) {
case PCI_DEVICE_ID_TTI_HPT366:
- if (class_rev < 6)
+ if (rev < 6)
return -ENODEV;
break;
case PCI_DEVICE_ID_TTI_HPT371:
- if (class_rev < 2)
+ if (rev < 2)
return -ENODEV;
/* 371N if rev > 1 */
break;
case PCI_DEVICE_ID_TTI_HPT372:
/* 372N if rev >= 2*/
- if (class_rev < 2)
+ if (rev < 2)
return -ENODEV;
break;
case PCI_DEVICE_ID_TTI_HPT302:
- if (class_rev < 2)
+ if (rev < 2)
return -ENODEV;
break;
case PCI_DEVICE_ID_TTI_HPT372N:
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 7e31025..c86c716 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -255,8 +255,17 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef CONFIG_PM
static int hpt3x3_reinit_one(struct pci_dev *dev)
{
+ struct ata_host *host = dev_get_drvdata(&dev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(dev);
+ if (rc)
+ return rc;
+
hpt3x3_init_chipset(dev);
- return ata_pci_device_resume(dev);
+
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index f156da8..8f3325a 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -22,7 +22,7 @@
#define DRV_VERSION "0.0.3"
/**
- * it8213_pre_reset - check for 40/80 pin
+ * it8213_pre_reset - probe begin
* @link: link
* @deadline: deadline jiffies for the operation
*
@@ -92,18 +92,17 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
{ 2, 1 },
{ 2, 3 }, };
- if (pio > 2)
- control |= 1; /* TIME1 enable */
+ if (pio > 1)
+ control |= 1; /* TIME */
if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */
- control |= 2; /* IORDY enable */
+ control |= 2; /* IE */
/* Bit 2 is set for ATAPI on the IT8213 - reverse of ICH/PIIX */
if (adev->class != ATA_DEV_ATA)
- control |= 4;
+ control |= 4; /* PPE */
pci_read_config_word(dev, idetm_port, &idetm_data);
- /* Enable PPE, IE and TIME as appropriate */
-
+ /* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
idetm_data &= 0xCCF0;
idetm_data |= control;
@@ -112,17 +111,17 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
} else {
u8 slave_data;
- idetm_data &= 0xCC0F;
+ idetm_data &= 0xFF0F;
idetm_data |= (control << 4);
/* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
slave_data &= 0xF0;
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
+ slave_data |= (timings[pio][0] << 2) | timings[pio][1];
pci_write_config_byte(dev, 0x44, slave_data);
}
- idetm_data |= 0x4000; /* Ensure SITRE is enabled */
+ idetm_data |= 0x4000; /* Ensure SITRE is set */
pci_write_config_word(dev, idetm_port, idetm_data);
}
@@ -173,10 +172,10 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
udma_enable |= (1 << devid);
- /* Load the UDMA mode number */
+ /* Load the UDMA cycle time */
pci_read_config_word(dev, 0x4A, &udma_timing);
udma_timing &= ~(3 << (4 * devid));
- udma_timing |= (udma & 3) << (4 * devid);
+ udma_timing |= u_speed << (4 * devid);
pci_write_config_word(dev, 0x4A, udma_timing);
/* Load the clock selection */
@@ -211,7 +210,7 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
master_data |= control << 4;
pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= (0x0F + 0xE1 * ap->port_no);
+ slave_data &= 0xF0;
/* Load the matching timing */
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
pci_write_config_byte(dev, 0x44, slave_data);
@@ -263,7 +262,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
+ .mwdma_mask = ATA_MWDMA12_ONLY,
.udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */
.port_ops = &it8213_ops,
};
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 188bc2f..edc5c1f 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -955,7 +955,7 @@ static int it821x_reinit_one(struct pci_dev *pdev)
static const struct pci_device_id it821x[] = {
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
- { PCI_VDEVICE(RDC, 0x1010), },
+ { PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), },
{ },
};
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 6932e56..9df1ff7 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -25,6 +25,13 @@
* http://www.ryston.cz/petr/vlb/pdc20230b.html
* http://www.ryston.cz/petr/vlb/pdc20230c.html
* http://www.ryston.cz/petr/vlb/pdc20630.html
+ * QDI65x0:
+ * http://www.ryston.cz/petr/vlb/qd6500.html
+ * http://www.ryston.cz/petr/vlb/qd6580.html
+ *
+ * QDI65x0 probe code based on drivers/ide/legacy/qd65xx.c
+ * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
+ * Samuel Thibault <samuel.thibault@ens-lyon.org>
*
* Unsupported but docs exist:
* Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
@@ -35,7 +42,7 @@
* the MPIIX where the tuning is PCI side but the IDE is "ISA side".
*
* Specific support is included for the ht6560a/ht6560b/opti82c611a/
- * opti82c465mv/promise 20230c/20630/winbond83759A
+ * opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A
*
* Use the autospeed and pio_mask options with:
* Appian ADI/2 aka CLPD7220 or AIC25VL01.
@@ -672,7 +679,7 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
outb(timing, ld_qdi->timing + 2 * ap->port_no);
/* Clear the FIFO */
if (adev->class != ATA_DEV_ATA)
- outb(0x5F, ld_qdi->timing + 3);
+ outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
}
/**
@@ -707,7 +714,7 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
outb(timing, ld_qdi->timing + 2 * adev->devno);
/* Clear the FIFO */
if (adev->class != ATA_DEV_ATA)
- outb(0x5F, ld_qdi->timing + 3);
+ outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
}
/**
@@ -787,6 +794,7 @@ static struct ata_port_operations qdi6580_port_ops = {
static struct ata_port_operations qdi6580dp_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = qdi6580dp_set_piomode,
+ .qc_issue = qdi_qc_issue,
.sff_data_xfer = vlb32_data_xfer,
};
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 2096fb7..950da39 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -58,7 +58,7 @@ static int marvell_pata_active(struct pci_dev *pdev)
}
/**
- * marvell_pre_reset - check for 40/80 pin
+ * marvell_pre_reset - probe begin
* @link: link
* @deadline: deadline jiffies for the operation
*
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 773b159..061aa1c 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -325,6 +325,13 @@ static struct scsi_host_template ns87415_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
+static void ns87415_fixup(struct pci_dev *pdev)
+{
+ /* Select 512 byte sectors */
+ pci_write_config_byte(pdev, 0x55, 0xEE);
+ /* Select PIO0 8bit clocking */
+ pci_write_config_byte(pdev, 0x54, 0xB7);
+}
/**
* ns87415_init_one - Register 87415 ATA PCI device with kernel services
@@ -371,10 +378,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
if (rc)
return rc;
- /* Select 512 byte sectors */
- pci_write_config_byte(pdev, 0x55, 0xEE);
- /* Select PIO0 8bit clocking */
- pci_write_config_byte(pdev, 0x54, 0xB7);
+ ns87415_fixup(pdev);
+
return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
}
@@ -384,6 +389,23 @@ static const struct pci_device_id ns87415_pci_tbl[] = {
{ } /* terminate list */
};
+#ifdef CONFIG_PM
+static int ns87415_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ ns87415_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct pci_driver ns87415_pci_driver = {
.name = DRV_NAME,
.id_table = ns87415_pci_tbl,
@@ -391,7 +413,7 @@ static struct pci_driver ns87415_pci_driver = {
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
+ .resume = ns87415_reinit_one,
#endif
};
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 84ac503..9a8687db 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -239,7 +239,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
+ .mwdma_mask = ATA_MWDMA12_ONLY,
.port_ops = &oldpiix_pata_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
new file mode 100644
index 0000000..bfe0180
--- /dev/null
+++ b/drivers/ata/pata_piccolo.c
@@ -0,0 +1,140 @@
+/*
+ * pata_piccolo.c - Toshiba Piccolo PATA/SATA controller driver.
+ *
+ * This is basically an update to ata_generic.c to add Toshiba Piccolo support
+ * then split out to keep ata_generic "clean".
+ *
+ * Copyright 2005 Red Hat Inc, all rights reserved.
+ *
+ * Elements from ide/pci/generic.c
+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
+ * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * The timing data tables/programming info are courtesy of the NetBSD driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_piccolo"
+#define DRV_VERSION "0.0.1"
+
+
+
+static void tosh_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u16 pio[6] = { /* For reg 0x50 low word & E088 */
+ 0x0566, 0x0433, 0x0311, 0x0201, 0x0200, 0x0100
+ };
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u16 conf;
+ pci_read_config_word(pdev, 0x50, &conf);
+ conf &= 0xE088;
+ conf |= pio[adev->pio_mode - XFER_PIO_0];
+ pci_write_config_word(pdev, 0x50, conf);
+}
+
+static void tosh_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 conf;
+ pci_read_config_dword(pdev, 0x5C, &conf);
+ conf &= 0x78FFE088; /* Keep the other bits */
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ int udma = adev->dma_mode - XFER_UDMA_0;
+ conf |= 0x80000000;
+ conf |= (udma + 2) << 28;
+ conf |= (2 - udma) * 0x111; /* spread into three nibbles */
+ } else {
+ static const u32 mwdma[4] = {
+ 0x0655, 0x0200, 0x0200, 0x0100
+ };
+ conf |= mwdma[adev->dma_mode - XFER_MW_DMA_0];
+ }
+ pci_write_config_dword(pdev, 0x5C, conf);
+}
+
+
+static struct scsi_host_template tosh_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations tosh_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_unknown,
+ .set_piomode = tosh_set_piomode,
+ .set_dmamode = tosh_set_dmamode
+};
+
+/**
+ * ata_tosh_init - attach generic IDE
+ * @dev: PCI device found
+ * @id: match entry
+ *
+ * Called each time a matching IDE interface is found. We check if the
+ * interface is one we wish to claim and if so we perform any chip
+ * specific hacks then let the ATA layer do the heavy lifting.
+ */
+
+static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ static const struct ata_port_info info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO5,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
+ .port_ops = &tosh_port_ops
+ };
+ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
+ /* Just one port for the moment */
+ return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL);
+}
+
+static struct pci_device_id ata_tosh[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), },
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), },
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), },
+ { 0, },
+};
+
+static struct pci_driver ata_tosh_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ata_tosh,
+ .probe = ata_tosh_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+static int __init ata_tosh_init(void)
+{
+ return pci_register_driver(&ata_tosh_pci_driver);
+}
+
+
+static void __exit ata_tosh_exit(void)
+{
+ pci_unregister_driver(&ata_tosh_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("Low level driver for Toshiba Piccolo ATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, ata_tosh);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ata_tosh_init);
+module_exit(ata_tosh_exit);
+
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 4401b33..4fd25e7 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -139,9 +139,9 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
pci_read_config_byte(dev, 0x4A, &udma_mode);
if (adev->xfer_mode == XFER_UDMA_2)
- udma_mode &= ~ (1 << adev->devno);
+ udma_mode &= ~(2 << (adev->devno * 4));
else /* UDMA 4 */
- udma_mode |= (1 << adev->devno);
+ udma_mode |= (2 << (adev->devno * 4));
pci_write_config_byte(dev, 0x4A, udma_mode);
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index c843a1e..237a24d 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -284,7 +284,7 @@ static struct ata_port_info rdc_port_info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
+ .mwdma_mask = ATA_MWDMA12_ONLY,
.udma_mask = ATA_UDMA5,
.port_ops = &rdc_pata_ops,
};
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index a5e4dfe..2932998 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -105,11 +105,20 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
#ifdef CONFIG_PM
static int rz1000_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
/* If this fails on resume (which is a "cant happen" case), we
must stop as any progress risks data loss */
if (rz1000_fifo_disable(pdev))
panic("rz1000 fifo");
- return ata_pci_device_resume(pdev);
+
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 4cb649d..a2ace48 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -212,13 +212,11 @@ static struct ata_port_operations sil680_port_ops = {
static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
{
- u32 class_rev = 0;
u8 tmpbyte = 0;
- pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
/* FIXME: double check */
- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
+ pdev->revision ? 1 : 255);
pci_write_config_byte(pdev, 0x80, 0x00);
pci_write_config_byte(pdev, 0x84, 0x00);
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 488e77b..5c30d56 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -2,7 +2,7 @@
* pata_sis.c - SiS ATA driver
*
* (C) 2005 Red Hat
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2009 Bartlomiej Zolnierkiewicz
*
* Based upon linux/drivers/ide/pci/sis5513.c
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
@@ -829,6 +829,23 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset);
}
+#ifdef CONFIG_PM
+static int sis_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ sis_fixup(pdev, host->private_data);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static const struct pci_device_id sis_pci_tbl[] = {
{ PCI_VDEVICE(SI, 0x5513), }, /* SiS 5513 */
{ PCI_VDEVICE(SI, 0x5518), }, /* SiS 5518 */
@@ -844,7 +861,7 @@ static struct pci_driver sis_pci_driver = {
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
+ .resume = sis_reinit_one,
#endif
};
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 88984b8..0d97890 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -303,14 +303,21 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
}
/* Set UDMA unless device is not UDMA capable */
- if (udma_type && t.udma) {
- u8 cable80_status;
+ if (udma_type) {
+ u8 udma_etc;
- /* Get 80-wire cable detection bit */
- pci_read_config_byte(pdev, 0x50 + offset, &cable80_status);
- cable80_status &= 0x10;
+ pci_read_config_byte(pdev, 0x50 + offset, &udma_etc);
- pci_write_config_byte(pdev, 0x50 + offset, ut | cable80_status);
+ /* clear transfer mode bit */
+ udma_etc &= ~0x20;
+
+ if (t.udma) {
+ /* preserve 80-wire cable detection bit */
+ udma_etc &= 0x10;
+ udma_etc |= ut;
+ }
+
+ pci_write_config_byte(pdev, 0x50 + offset, udma_etc);
}
}
@@ -337,6 +344,32 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
/**
+ * via_mode_filter - filter buggy device/mode pairs
+ * @dev: ATA device
+ * @mask: Mode bitmask
+ *
+ * We need to apply some minimal filtering for old controllers and at least
+ * one breed of Transcend SSD. Return the updated mask.
+ */
+
+static unsigned long via_mode_filter(struct ata_device *dev, unsigned long mask)
+{
+ struct ata_host *host = dev->link->ap->host;
+ const struct via_isa_bridge *config = host->private_data;
+ unsigned char model_num[ATA_ID_PROD_LEN + 1];
+
+ if (config->id == PCI_DEVICE_ID_VIA_82C586_0) {
+ ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
+ if (strcmp(model_num, "TS64GSSD25-M") == 0) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "disabling UDMA mode due to reported lockups with this device.\n");
+ mask &= ~ ATA_MASK_UDMA;
+ }
+ }
+ return ata_bmdma_mode_filter(dev, mask);
+}
+
+/**
* via_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
@@ -427,6 +460,7 @@ static struct ata_port_operations via_port_ops = {
.prereset = via_pre_reset,
.sff_tf_load = via_tf_load,
.port_start = via_port_start,
+ .mode_filter = via_mode_filter,
};
static struct ata_port_operations via_port_ops_noirq = {
@@ -526,7 +560,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &via_port_ops
};
const struct ata_port_info *ppi[] = { NULL, NULL };
- struct pci_dev *isa = NULL;
+ struct pci_dev *isa;
const struct via_isa_bridge *config;
static int printed_version;
u8 enable;
@@ -551,15 +585,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
!!(config->flags & VIA_BAD_ID),
config->id, NULL))) {
+ u8 rev = isa->revision;
+ pci_dev_put(isa);
- if (isa->revision >= config->rev_min &&
- isa->revision <= config->rev_max)
+ if (rev >= config->rev_min && rev <= config->rev_max)
break;
- pci_dev_put(isa);
}
- pci_dev_put(isa);
-
if (!(config->flags & VIA_NO_ENABLES)) {
/* 0x40 low bits indicate enabled channels */
pci_read_config_byte(pdev, 0x40 , &enable);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 172b57e..8a5d35b 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -34,7 +34,7 @@ enum {
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_PMP | ATA_FLAG_NCQ),
+ ATA_FLAG_PMP | ATA_FLAG_NCQ | ATA_FLAG_AN),
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
@@ -132,7 +132,7 @@ enum {
INT_ON_SINGL_DEVICE_ERR = (1 << 1),
INT_ON_CMD_COMPLETE = 1,
- INT_ON_ERROR = INT_ON_FATAL_ERR |
+ INT_ON_ERROR = INT_ON_FATAL_ERR | INT_ON_SNOTIFY_UPDATE |
INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
/*
@@ -153,7 +153,7 @@ enum {
IE_ON_CMD_COMPLETE = 1,
DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
- IE_ON_SIGNATURE_UPDATE |
+ IE_ON_SIGNATURE_UPDATE | IE_ON_SNOTIFY_UPDATE |
IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
@@ -992,9 +992,8 @@ static void sata_fsl_error_intr(struct ata_port *ap)
*/
sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
- if (unlikely(SError & 0xFFFF0000)) {
+ if (unlikely(SError & 0xFFFF0000))
sata_fsl_scr_write(&ap->link, SCR_ERROR, SError);
- }
DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
hstatus, cereg, ioread32(hcr_base + DE), SError);
@@ -1007,6 +1006,10 @@ static void sata_fsl_error_intr(struct ata_port *ap)
freeze = 1;
}
+ /* Handle SDB FIS receive & notify update */
+ if (hstatus & INT_ON_SNOTIFY_UPDATE)
+ sata_async_notification(ap);
+
/* Handle PHYRDY change notification */
if (hstatus & INT_ON_PHYRDY_CHG) {
DPRINTK("SATA FSL: PHYRDY change indication\n");
@@ -1070,9 +1073,9 @@ static void sata_fsl_error_intr(struct ata_port *ap)
}
/* record error info */
- if (qc) {
+ if (qc)
qc->err_mask |= err_mask;
- } else
+ else
ehi->err_mask |= err_mask;
ehi->action |= action;
@@ -1103,7 +1106,6 @@ static void sata_fsl_host_intr(struct ata_port *ap)
if (unlikely(SError & 0xFFFF0000)) {
DPRINTK("serror @host_intr : 0x%x\n", SError);
sata_fsl_error_intr(ap);
-
}
if (unlikely(hstatus & INT_ON_ERROR)) {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 6f5093b..a8a7be0 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2217,7 +2217,7 @@ static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc)
int err = 0;
ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis);
- err = mv_send_fis(ap, fis, sizeof(fis) / sizeof(fis[0]));
+ err = mv_send_fis(ap, fis, ARRAY_SIZE(fis));
if (err)
return err;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e6946fc..1370df6 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -417,6 +417,10 @@ static struct ata_port_operations sil24_ops = {
#endif
};
+static int sata_sil24_msi; /* Disable MSI */
+module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
+MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
+
/*
* Use bits 30-31 of port_flags to encode available port numbers.
* Current maxium is 4.
@@ -1340,6 +1344,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
sil24_init_controller(host);
+ if (sata_sil24_msi && !pci_enable_msi(pdev)) {
+ dev_printk(KERN_INFO, &pdev->dev, "Using MSI\n");
+ pci_intx(pdev, 0);
+ }
+
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
&sil24_sht);
OpenPOWER on IntegriCloud