diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/ahci.c | 209 | ||||
| -rw-r--r-- | drivers/ata/libata-acpi.c | 40 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 24 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 56 | ||||
| -rw-r--r-- | drivers/ata/libata.h | 2 | ||||
| -rw-r--r-- | drivers/ata/pata_ali.c | 2 | ||||
| -rw-r--r-- | drivers/ata/pata_atiixp.c | 2 | ||||
| -rw-r--r-- | drivers/ata/pata_atp867x.c | 101 | ||||
| -rw-r--r-- | drivers/ata/pata_sc1200.c | 3 | ||||
| -rw-r--r-- | drivers/ata/pata_via.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c | 29 | ||||
| -rw-r--r-- | drivers/ata/sata_nv.c | 18 | ||||
| -rw-r--r-- | drivers/ata/sata_via.c | 1 |
13 files changed, 350 insertions, 139 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index acd1162..a3241a1 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -122,6 +122,7 @@ enum { HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ HOST_EM_LOC = 0x1c, /* Enclosure Management location */ HOST_EM_CTL = 0x20, /* Enclosure Management Control */ + HOST_CAP2 = 0x24, /* host capabilities, extended */ /* HOST_CTL bits */ HOST_RESET = (1 << 0), /* reset controller; self-clear */ @@ -129,16 +130,29 @@ enum { HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ + HOST_CAP_SXS = (1 << 5), /* Supports External SATA */ HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ - HOST_CAP_SSC = (1 << 14), /* Slumber capable */ + HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */ + HOST_CAP_PART = (1 << 13), /* Partial state capable */ + HOST_CAP_SSC = (1 << 14), /* Slumber state capable */ + HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */ + HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ + HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_LED = (1 << 25), /* Supports activity LED */ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ + HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */ HOST_CAP_SNTF = (1 << 29), /* SNotification register */ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + /* HOST_CAP2 bits */ + HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */ + HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */ + HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */ + /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ @@ -267,8 +281,10 @@ struct ahci_em_priv { struct ahci_host_priv { unsigned int flags; /* AHCI_HFLAG_* */ u32 cap; /* cap to use */ + u32 cap2; /* cap2 to use */ u32 port_map; /* port map to use */ u32 saved_cap; /* saved initial cap */ + u32 saved_cap2; /* saved initial cap2 */ u32 saved_port_map; /* saved initial port_map */ u32 em_loc; /* enclosure management location */ }; @@ -331,12 +347,15 @@ static void ahci_init_sw_activity(struct ata_link *link); static ssize_t ahci_show_host_caps(struct device *dev, struct device_attribute *attr, char *buf); +static ssize_t ahci_show_host_cap2(struct device *dev, + struct device_attribute *attr, char *buf); static ssize_t ahci_show_host_version(struct device *dev, struct device_attribute *attr, char *buf); static ssize_t ahci_show_port_cmd(struct device *dev, struct device_attribute *attr, char *buf); DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); +DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); @@ -345,6 +364,7 @@ static struct device_attribute *ahci_shost_attrs[] = { &dev_attr_em_message_type, &dev_attr_em_message, &dev_attr_ahci_host_caps, + &dev_attr_ahci_host_cap2, &dev_attr_ahci_host_version, &dev_attr_ahci_port_cmd, NULL @@ -447,7 +467,8 @@ static const struct ata_port_info ahci_port_info[] = { [board_ahci_sb600] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255), + AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 | + AHCI_HFLAG_32BIT_ONLY), .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, @@ -554,7 +575,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */ /* AMD */ - { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD SB900 */ + { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */ /* AMD is using RAID class only for ahci controllers */ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci }, @@ -584,6 +605,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */ @@ -732,6 +754,16 @@ static ssize_t ahci_show_host_caps(struct device *dev, return sprintf(buf, "%x\n", hpriv->cap); } +static ssize_t ahci_show_host_cap2(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + struct ahci_host_priv *hpriv = ap->host->private_data; + + return sprintf(buf, "%x\n", hpriv->cap2); +} + static ssize_t ahci_show_host_version(struct device *dev, struct device_attribute *attr, char *buf) { @@ -771,7 +803,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; - u32 cap, port_map; + u32 cap, cap2, vers, port_map; int i; int mv; @@ -784,6 +816,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev, hpriv->saved_cap = cap = readl(mmio + HOST_CAP); hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); + /* CAP2 register is only defined for AHCI 1.2 and later */ + vers = readl(mmio + HOST_VERSION); + if ((vers >> 16) > 1 || + ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200)) + hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2); + else + hpriv->saved_cap2 = cap2 = 0; + /* some chips have errata preventing 64bit use */ if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { dev_printk(KERN_INFO, &pdev->dev, @@ -869,6 +909,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev, /* record values to use during operation */ hpriv->cap = cap; + hpriv->cap2 = cap2; hpriv->port_map = port_map; } @@ -887,6 +928,8 @@ static void ahci_restore_initial_config(struct ata_host *host) void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; writel(hpriv->saved_cap, mmio + HOST_CAP); + if (hpriv->saved_cap2) + writel(hpriv->saved_cap2, mmio + HOST_CAP2); writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ } @@ -2534,13 +2577,14 @@ static void ahci_print_info(struct ata_host *host) struct ahci_host_priv *hpriv = host->private_data; struct pci_dev *pdev = to_pci_dev(host->dev); void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; - u32 vers, cap, impl, speed; + u32 vers, cap, cap2, impl, speed; const char *speed_s; u16 cc; const char *scc_s; vers = readl(mmio + HOST_VERSION); cap = hpriv->cap; + cap2 = hpriv->cap2; impl = hpriv->port_map; speed = (cap >> 20) & 0xf; @@ -2583,25 +2627,29 @@ static void ahci_print_info(struct ata_host *host) "flags: " "%s%s%s%s%s%s%s" "%s%s%s%s%s%s%s" - "%s\n" + "%s%s%s%s%s%s\n" , - cap & (1 << 31) ? "64bit " : "", - cap & (1 << 30) ? "ncq " : "", - cap & (1 << 29) ? "sntf " : "", - cap & (1 << 28) ? "ilck " : "", - cap & (1 << 27) ? "stag " : "", - cap & (1 << 26) ? "pm " : "", - cap & (1 << 25) ? "led " : "", - - cap & (1 << 24) ? "clo " : "", - cap & (1 << 19) ? "nz " : "", - cap & (1 << 18) ? "only " : "", - cap & (1 << 17) ? "pmp " : "", - cap & (1 << 15) ? "pio " : "", - cap & (1 << 14) ? "slum " : "", - cap & (1 << 13) ? "part " : "", - cap & (1 << 6) ? "ems ": "" + cap & HOST_CAP_64 ? "64bit " : "", + cap & HOST_CAP_NCQ ? "ncq " : "", + cap & HOST_CAP_SNTF ? "sntf " : "", + cap & HOST_CAP_MPS ? "ilck " : "", + cap & HOST_CAP_SSS ? "stag " : "", + cap & HOST_CAP_ALPM ? "pm " : "", + cap & HOST_CAP_LED ? "led " : "", + cap & HOST_CAP_CLO ? "clo " : "", + cap & HOST_CAP_ONLY ? "only " : "", + cap & HOST_CAP_PMP ? "pmp " : "", + cap & HOST_CAP_FBS ? "fbs " : "", + cap & HOST_CAP_PIO_MULTI ? "pio " : "", + cap & HOST_CAP_SSC ? "slum " : "", + cap & HOST_CAP_PART ? "part " : "", + cap & HOST_CAP_CCC ? "ccc " : "", + cap & HOST_CAP_EMS ? "ems " : "", + cap & HOST_CAP_SXS ? "sxs " : "", + cap2 & HOST_CAP2_APST ? "apst " : "", + cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "", + cap2 & HOST_CAP2_BOH ? "boh " : "" ); } @@ -2650,17 +2698,15 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } -/* - * SB600 ahci controller on certain boards can't do 64bit DMA with - * older BIOS. - */ -static bool ahci_sb600_32bit_only(struct pci_dev *pdev) +/* only some SB600 ahci controllers can do 64bit DMA */ +static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) { static const struct dmi_system_id sysids[] = { /* * The oldest version known to be broken is 0901 and * working is 1501 which was released on 2007-10-26. - * Force 32bit DMA on anything older than 1501. + * Enable 64bit DMA on 1501 and anything newer. + * * Please read bko#9412 for more info. */ { @@ -2673,46 +2719,57 @@ static bool ahci_sb600_32bit_only(struct pci_dev *pdev) .driver_data = "20071026", /* yyyymmdd */ }, /* - * It's yet unknown whether more recent BIOS fixes the - * problem. Blacklist the whole board for the time - * being. Please read the following thread for more - * info. + * All BIOS versions for the MSI K9A2 Platinum (MS-7376) + * support 64bit DMA. * - * http://thread.gmane.org/gmane.linux.ide/42326 + * BIOS versions earlier than 1.5 had the Manufacturer DMI + * fields as "MICRO-STAR INTERANTIONAL CO.,LTD". + * This spelling mistake was fixed in BIOS version 1.5, so + * 1.5 and later have the Manufacturer as + * "MICRO-STAR INTERNATIONAL CO.,LTD". + * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER". + * + * BIOS versions earlier than 1.9 had a Board Product Name + * DMI field of "MS-7376". This was changed to be + * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still + * match on DMI_BOARD_NAME of "MS-7376". */ { - .ident = "Gigabyte GA-MA69VM-S2", + .ident = "MSI K9A2 Platinum", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, - "Gigabyte Technology Co., Ltd."), - DMI_MATCH(DMI_BOARD_NAME, "GA-MA69VM-S2"), + "MICRO-STAR INTER"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7376"), }, }, { } }; const struct dmi_system_id *match; + int year, month, date; + char buf[9]; match = dmi_first_match(sysids); if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) || !match) return false; - if (match->driver_data) { - int year, month, date; - char buf[9]; - - dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); - snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); + if (!match->driver_data) + goto enable_64bit; - if (strcmp(buf, match->driver_data) >= 0) - return false; + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); + snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); + if (strcmp(buf, match->driver_data) >= 0) + goto enable_64bit; + else { dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, " "forcing 32bit DMA, update BIOS\n", match->ident); - } else - dev_printk(KERN_WARNING, &pdev->dev, "%s: this board can't " - "do 64bit DMA, forcing 32bit\n", match->ident); + return false; + } +enable_64bit: + dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n", + match->ident); return true; } @@ -2858,6 +2915,55 @@ static bool ahci_broken_online(struct pci_dev *pdev) return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff); } +#ifdef CONFIG_ATA_ACPI +static void ahci_gtf_filter_workaround(struct ata_host *host) +{ + static const struct dmi_system_id sysids[] = { + /* + * Aspire 3810T issues a bunch of SATA enable commands + * via _GTF including an invalid one and one which is + * rejected by the device. Among the successful ones + * is FPDMA non-zero offset enable which when enabled + * only on the drive side leads to NCQ command + * failures. Filter it out. + */ + { + .ident = "Aspire 3810T", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"), + }, + .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET, + }, + { } + }; + const struct dmi_system_id *dmi = dmi_first_match(sysids); + unsigned int filter; + int i; + + if (!dmi) + return; + + filter = (unsigned long)dmi->driver_data; + dev_printk(KERN_INFO, host->dev, + "applying extra ACPI _GTF filter 0x%x for %s\n", + filter, dmi->ident); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_link *link; + struct ata_device *dev; + + ata_for_each_link(link, ap, EDGE) + ata_for_each_dev(dev, link, ALL) + dev->gtf_filter |= filter; + } +} +#else +static inline void ahci_gtf_filter_workaround(struct ata_host *host) +{} +#endif + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2926,9 +3032,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; - /* apply sb600 32bit only quirk */ - if (ahci_sb600_32bit_only(pdev)) - hpriv->flags |= AHCI_HFLAG_32BIT_ONLY; + /* only some SB600s can do 64bit DMA */ + if (ahci_sb600_enable_64bit(pdev)) + hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY; if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) pci_intx(pdev, 1); @@ -3023,6 +3129,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* apply workaround for ASUS P5W DH Deluxe mainboard */ ahci_p5wdh_workaround(host); + /* apply gtf filter quirk */ + ahci_gtf_filter_workaround(host); + /* initialize adapter */ rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64); if (rc) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 01964b6..b0882cd 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -20,19 +20,9 @@ #include <acpi/acpi_bus.h> -enum { - ATA_ACPI_FILTER_SETXFER = 1 << 0, - ATA_ACPI_FILTER_LOCK = 1 << 1, - ATA_ACPI_FILTER_DIPM = 1 << 2, - - ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER | - ATA_ACPI_FILTER_LOCK | - ATA_ACPI_FILTER_DIPM, -}; - -static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT; +unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT; module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644); -MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)"); +MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)"); #define NO_PORT_MULT 0xffff #define SATA_ADR(root, pmp) (((root) << 16) | (pmp)) @@ -613,10 +603,11 @@ static void ata_acpi_gtf_to_tf(struct ata_device *dev, tf->command = gtf->tf[6]; /* 0x1f7 */ } -static int ata_acpi_filter_tf(const struct ata_taskfile *tf, +static int ata_acpi_filter_tf(struct ata_device *dev, + const struct ata_taskfile *tf, const struct ata_taskfile *ptf) { - if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) { + if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) { /* libata doesn't use ACPI to configure transfer mode. * It will only confuse device configuration. Skip. */ @@ -625,7 +616,7 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf, return 1; } - if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) { + if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) { /* BIOS writers, sorry but we don't wanna lock * features unless the user explicitly said so. */ @@ -647,12 +638,23 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf, return 1; } - if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) { + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_SATA_ENABLE) { /* inhibit enabling DIPM */ - if (tf->command == ATA_CMD_SET_FEATURES && - tf->feature == SETFEATURES_SATA_ENABLE && + if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM && tf->nsect == SATA_DIPM) return 1; + + /* inhibit FPDMA non-zero offset */ + if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET && + (tf->nsect == SATA_FPDMA_OFFSET || + tf->nsect == SATA_FPDMA_IN_ORDER)) + return 1; + + /* inhibit FPDMA auto activation */ + if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA && + tf->nsect == SATA_FPDMA_AA) + return 1; } return 0; @@ -704,7 +706,7 @@ static int ata_acpi_run_tf(struct ata_device *dev, pptf = &ptf; } - if (!ata_acpi_filter_tf(&tf, pptf)) { + if (!ata_acpi_filter_tf(dev, &tf, pptf)) { rtf = tf; err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0, 0); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 0ddaf43..dc72690 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4919,10 +4919,11 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) */ void ata_qc_free(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; + struct ata_port *ap; unsigned int tag; WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + ap = qc->ap; qc->flags = 0; tag = qc->tag; @@ -4934,11 +4935,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) void __ata_qc_complete(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; - struct ata_link *link = qc->dev->link; + struct ata_port *ap; + struct ata_link *link; WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE)); + ap = qc->ap; + link = qc->dev->link; if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); @@ -5028,12 +5031,14 @@ void ata_qc_complete(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_FAILED; if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { - if (!ata_tag_internal(qc->tag)) { - /* always fill result TF for failed qc */ - fill_result_tf(qc); + /* always fill result TF for failed qc */ + fill_result_tf(qc); + + if (!ata_tag_internal(qc->tag)) ata_qc_schedule_eh(qc); - return; - } + else + __ata_qc_complete(qc); + return; } WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN); @@ -5591,6 +5596,9 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) dev->link = link; dev->devno = dev - link->device; +#ifdef CONFIG_ATA_ACPI + dev->gtf_filter = ata_acpi_gtf_filter; +#endif ata_dev_init(dev); } } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index a04488f..bba2ae5 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2667,14 +2667,14 @@ int ata_eh_reset(struct ata_link *link, int classify, dev->pio_mode = XFER_PIO_0; dev->flags &= ~ATA_DFLAG_SLEEPING; - if (!ata_phys_link_offline(ata_dev_phys_link(dev))) { - /* apply class override */ - if (lflags & ATA_LFLAG_ASSUME_ATA) - classes[dev->devno] = ATA_DEV_ATA; - else if (lflags & ATA_LFLAG_ASSUME_SEMB) - classes[dev->devno] = ATA_DEV_SEMB_UNSUP; - } else - classes[dev->devno] = ATA_DEV_NONE; + if (ata_phys_link_offline(ata_dev_phys_link(dev))) + continue; + + /* apply class override */ + if (lflags & ATA_LFLAG_ASSUME_ATA) + classes[dev->devno] = ATA_DEV_ATA; + else if (lflags & ATA_LFLAG_ASSUME_SEMB) + classes[dev->devno] = ATA_DEV_SEMB_UNSUP; } /* record current link speed */ @@ -2713,34 +2713,48 @@ int ata_eh_reset(struct ata_link *link, int classify, ap->pflags &= ~ATA_PFLAG_EH_PENDING; spin_unlock_irqrestore(link->ap->lock, flags); - /* Make sure onlineness and classification result correspond. + /* + * Make sure onlineness and classification result correspond. * Hotplug could have happened during reset and some * controllers fail to wait while a drive is spinning up after * being hotplugged causing misdetection. By cross checking - * link onlineness and classification result, those conditions - * can be reliably detected and retried. + * link on/offlineness and classification result, those + * conditions can be reliably detected and retried. */ nr_unknown = 0; ata_for_each_dev(dev, link, ALL) { - /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */ - if (classes[dev->devno] == ATA_DEV_UNKNOWN) { - classes[dev->devno] = ATA_DEV_NONE; - if (ata_phys_link_online(ata_dev_phys_link(dev))) + if (ata_phys_link_online(ata_dev_phys_link(dev))) { + if (classes[dev->devno] == ATA_DEV_UNKNOWN) { + ata_dev_printk(dev, KERN_DEBUG, "link online " + "but device misclassifed\n"); + classes[dev->devno] = ATA_DEV_NONE; nr_unknown++; + } + } else if (ata_phys_link_offline(ata_dev_phys_link(dev))) { + if (ata_class_enabled(classes[dev->devno])) + ata_dev_printk(dev, KERN_DEBUG, "link offline, " + "clearing class %d to NONE\n", + classes[dev->devno]); + classes[dev->devno] = ATA_DEV_NONE; + } else if (classes[dev->devno] == ATA_DEV_UNKNOWN) { + ata_dev_printk(dev, KERN_DEBUG, "link status unknown, " + "clearing UNKNOWN to NONE\n"); + classes[dev->devno] = ATA_DEV_NONE; } } if (classify && nr_unknown) { if (try < max_tries) { ata_link_printk(link, KERN_WARNING, "link online but " - "device misclassified, retrying\n"); + "%d devices misclassified, retrying\n", + nr_unknown); failed_link = link; rc = -EAGAIN; goto fail; } ata_link_printk(link, KERN_WARNING, - "link online but device misclassified, " - "device detection might fail\n"); + "link online but %d devices misclassified, " + "device detection might fail\n", nr_unknown); } /* reset successful, schedule revalidation */ @@ -2967,12 +2981,14 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, * device detection messages backwards. */ ata_for_each_dev(dev, link, ALL) { - if (!(new_mask & (1 << dev->devno)) || - dev->class == ATA_DEV_PMP) + if (!(new_mask & (1 << dev->devno))) continue; dev->class = ehc->classes[dev->devno]; + if (dev->class == ATA_DEV_PMP) + continue; + ehc->i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); ehc->i.flags &= ~ATA_EHI_PRINTINFO; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index be8e262..823e630 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -118,6 +118,8 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI +extern unsigned int ata_acpi_gtf_filter; + extern void ata_acpi_associate_sata_port(struct ata_port *ap); extern void ata_acpi_associate(struct ata_host *host); extern void ata_acpi_dissociate(struct ata_host *host); diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index fc9c5d6..1432dc9 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -290,7 +290,7 @@ static void ali_warn_atapi_dma(struct ata_device *adev) if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) { ata_dev_printk(adev, KERN_WARNING, - "WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled\n"); + "WARNING: ATAPI DMA disabled for reliability issues. It can be enabled\n"); ata_dev_printk(adev, KERN_WARNING, "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n"); } diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index aa4b3f6..ae4454d 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -246,7 +246,7 @@ static const struct pci_device_id atiixp[] = { { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), }, { }, }; diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c index 7990de9..6fe7ded 100644 --- a/drivers/ata/pata_atp867x.c +++ b/drivers/ata/pata_atp867x.c @@ -118,20 +118,13 @@ struct atp867x_priv { int pci66mhz; }; -static inline u8 atp867x_speed_to_mode(u8 speed) -{ - return speed - XFER_UDMA_0 + 1; -} - static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct atp867x_priv *dp = ap->private_data; u8 speed = adev->dma_mode; u8 b; - u8 mode; - - mode = atp867x_speed_to_mode(speed); + u8 mode = speed - XFER_UDMA_0 + 1; /* * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed @@ -156,25 +149,38 @@ static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev) iowrite8(b, dp->dma_mode); } -static int atp867x_get_active_clocks_shifted(unsigned int clk) +static int atp867x_get_active_clocks_shifted(struct ata_port *ap, + unsigned int clk) { + struct atp867x_priv *dp = ap->private_data; unsigned char clocks = clk; + /* + * Doc 6.6.9: increase the clock value by 1 for safer PIO speed + * on 66MHz bus + */ + if (dp->pci66mhz) + clocks++; + switch (clocks) { case 0: clocks = 1; break; - case 1 ... 7: - break; - case 8 ... 12: - clocks = 7; + case 1 ... 6: break; default: printk(KERN_WARNING "ATP867X: active %dclk is invalid. " - "Using default 8clk.\n", clk); - clocks = 0; /* 8 clk */ + "Using 12clk.\n", clk); + case 9 ... 12: + clocks = 7; /* 12 clk */ break; + case 7: + case 8: /* default 8 clk */ + clocks = 0; + goto active_clock_shift_done; } + +active_clock_shift_done: return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT; } @@ -188,20 +194,20 @@ static int atp867x_get_recover_clocks_shifted(unsigned int clk) break; case 1 ... 11: break; - case 12: - clocks = 0; - break; - case 13: case 14: - --clocks; + case 13: + case 14: + --clocks; /* by the spec */ break; case 15: break; default: printk(KERN_WARNING "ATP867X: recover %dclk is invalid. " - "Using default 15clk.\n", clk); - clocks = 0; /* 12 clk */ + "Using default 12clk.\n", clk); + case 12: /* default 12 clk */ + clocks = 0; break; } + return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT; } @@ -230,25 +236,38 @@ static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev) b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK); iowrite8(b, dp->dma_mode); - b = atp867x_get_active_clocks_shifted(t.active) | - atp867x_get_recover_clocks_shifted(t.recover); - if (dp->pci66mhz) - b += 0x10; + b = atp867x_get_active_clocks_shifted(ap, t.active) | + atp867x_get_recover_clocks_shifted(t.recover); if (adev->devno & 1) iowrite8(b, dp->slave_piospd); else iowrite8(b, dp->mstr_piospd); - /* - * use the same value for comand timing as for PIO timimg - */ + b = atp867x_get_active_clocks_shifted(ap, t.act8b) | + atp867x_get_recover_clocks_shifted(t.rec8b); + iowrite8(b, dp->eightb_piospd); } +static int atp867x_cable_override(struct pci_dev *pdev) +{ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP && + (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A || + pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) { + return 1; + } + return 0; +} + static int atp867x_cable_detect(struct ata_port *ap) { - return ATA_CBL_PATA40_SHORT; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (atp867x_cable_override(pdev)) + return ATA_CBL_PATA40_SHORT; + + return ATA_CBL_PATA_UNK; } static struct scsi_host_template atp867x_sht = { @@ -471,7 +490,6 @@ static int atp867x_init_one(struct pci_dev *pdev, static const struct ata_port_info info_867x = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &atp867x_ops, }; @@ -515,6 +533,23 @@ err_out: return rc; } +#ifdef CONFIG_PM +static int atp867x_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + atp867x_fixup(host); + + ata_host_resume(host); + return 0; +} +#endif + static struct pci_device_id atp867x_pci_tbl[] = { { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 }, { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 }, @@ -526,6 +561,10 @@ static struct pci_driver atp867x_driver = { .id_table = atp867x_pci_tbl, .probe = atp867x_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = atp867x_reinit_one, +#endif }; static int __init atp867x_init(void) diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index f49814d..3bbed83 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -235,8 +235,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA2, .port_ops = &sc1200_port_ops }; - /* Can't enable port 2 yet, see top comments */ - const struct ata_port_info *ppi[] = { &info, }; + const struct ata_port_info *ppi[] = { &info, NULL }; return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL); } diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 45657ca..88984b8 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -111,7 +111,7 @@ static const struct via_isa_bridge { { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, - { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 17f9ff9..6f5093b 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1382,6 +1382,25 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) */ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) return ATA_DEFER_PORT; + + /* PIO commands need exclusive link: no other commands [DMA or PIO] + * can run concurrently. + * set excl_link when we want to send a PIO command in DMA mode + * or a non-NCQ command in NCQ mode. + * When we receive a command from that link, and there are no + * outstanding commands, mark a flag to clear excl_link and let + * the command go through. + */ + if (unlikely(ap->excl_link)) { + if (link == ap->excl_link) { + if (ap->nr_active_links) + return ATA_DEFER_PORT; + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + return 0; + } else + return ATA_DEFER_PORT; + } + /* * If the port is completely idle, then allow the new qc. */ @@ -1395,8 +1414,14 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) * doesn't allow it. */ if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) && - (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol)) - return 0; + (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) { + if (ata_is_ncq(qc->tf.protocol)) + return 0; + else { + ap->excl_link = link; + return ATA_DEFER_PORT; + } + } return ATA_DEFER_PORT; } diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 86a4058..1eb4e02 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -1594,9 +1594,21 @@ static int nv_hardreset(struct ata_link *link, unsigned int *class, !ata_dev_enabled(link->device)) sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, NULL, NULL); - else if (!(ehc->i.flags & ATA_EHI_QUIET)) - ata_link_printk(link, KERN_INFO, - "nv: skipping hardreset on occupied port\n"); + else { + const unsigned long *timing = sata_ehc_deb_timing(ehc); + int rc; + + if (!(ehc->i.flags & ATA_EHI_QUIET)) + ata_link_printk(link, KERN_INFO, "nv: skipping " + "hardreset on occupied port\n"); + + /* make sure the link is online */ + rc = sata_link_resume(link, timing, deadline); + /* whine about phy resume failure but proceed */ + if (rc && rc != -EOPNOTSUPP) + ata_link_printk(link, KERN_WARNING, "failed to resume " + "link (errno=%d)\n", rc); + } /* device signature acquisition is unreliable */ return -EAGAIN; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index bdd43c7..02efd9a 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -93,7 +93,6 @@ static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x7372), vt6420 }, { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ { PCI_VDEVICE(VIA, 0x9000), vt8251 }, - { PCI_VDEVICE(VIA, 0x9040), vt8251 }, { } /* terminate list */ }; |
