summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/pata_acpi.c4
-rw-r--r--drivers/ata/pata_optidma.c2
-rw-r--r--drivers/ata/pata_pdc2027x.c2
-rw-r--r--drivers/ata/pata_pdc202xx_old.c4
-rw-r--r--drivers/ata/pata_via.c2
-rw-r--r--drivers/ata/pata_winbond.c2
-rw-r--r--drivers/ata/sata_nv.c46
-rw-r--r--drivers/ata/sata_sx4.c4
8 files changed, 33 insertions, 33 deletions
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 0f6f7bc..e4542ab 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -181,7 +181,7 @@ static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- if(!(acpi->gtm.flags & 0x10))
+ if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
@@ -202,7 +202,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- if(!(acpi->gtm.flags & 0x10))
+ if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 6b07b5b..f9b485a 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -449,7 +449,7 @@ static int optiplus_with_udma(struct pci_dev *pdev)
/* Find function 1 */
dev1 = pci_get_device(0x1045, 0xC701, NULL);
- if(dev1 == NULL)
+ if (dev1 == NULL)
return 0;
/* Rev must be >= 0x10 */
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 3d3f155..2622577 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -348,7 +348,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
ATA_ID_PROD_LEN + 1);
/* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
- if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+ if (strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
return ata_pci_default_filter(adev, mask);
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 65d9516..bc7c2d5 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -351,9 +351,9 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
struct pci_dev *bridge = dev->bus->self;
/* Don't grab anything behind a Promise I2O RAID */
if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
- if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
return -ENODEV;
- if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
return -ENODEV;
}
}
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index ea7a9a6..a4175fb 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -176,7 +176,7 @@ static int via_cable_detect(struct ata_port *ap) {
if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
return ATA_CBL_PATA40;
/* UDMA 66 chips have only drive side logic */
- else if((config->flags & VIA_UDMA) < VIA_UDMA_100)
+ else if ((config->flags & VIA_UDMA) < VIA_UDMA_100)
return ATA_CBL_PATA_UNK;
/* UDMA 100 or later */
pci_read_config_dword(pdev, 0x50, &ata66);
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 549cbbe..311cdb3 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -279,7 +279,7 @@ static __init int winbond_init(void)
if (request_region(port, 2, "pata_winbond")) {
ret = winbond_init_one(port);
- if(ret <= 0)
+ if (ret <= 0)
release_region(port, 2);
else ct+= ret;
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index f1b422f..8d55f7f 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1012,7 +1012,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
u32 check_commands;
int pos, error = 0;
- if(ata_tag_valid(ap->link.active_tag))
+ if (ata_tag_valid(ap->link.active_tag))
check_commands = 1 << ap->link.active_tag;
else
check_commands = ap->link.sactive;
@@ -1028,7 +1028,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
}
}
- if(notifier_clears[0] || notifier_clears[1]) {
+ if (notifier_clears[0] || notifier_clears[1]) {
/* Note: Both notifier clear registers must be written
if either is set, even if one is zero, according to NVIDIA. */
struct nv_adma_port_priv *pp = host->ports[0]->private_data;
@@ -1119,7 +1119,7 @@ static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
{
struct nv_adma_port_priv *pp = qc->ap->private_data;
- if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
ata_bmdma_post_internal_cmd(qc);
}
@@ -1194,10 +1194,10 @@ static int nv_adma_port_start(struct ata_port *ap)
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL ); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL ); /* flush posted write */
return 0;
}
@@ -1255,10 +1255,10 @@ static int nv_adma_port_resume(struct ata_port *ap)
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL ); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL ); /* flush posted write */
return 0;
}
@@ -1359,12 +1359,12 @@ static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
/* ADMA engine can only be used for non-ATAPI DMA commands,
or interrupt-driven no-data commands, where a result taskfile
is not required. */
- if((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
+ if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
(qc->tf.flags & ATA_TFLAG_POLLING) ||
(qc->flags & ATA_QCFLAG_RESULT_TF))
return 1;
- if((qc->flags & ATA_QCFLAG_DMAMAP) ||
+ if ((qc->flags & ATA_QCFLAG_DMAMAP) ||
(qc->tf.protocol == ATA_PROT_NODATA))
return 0;
@@ -1401,7 +1401,7 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
- if(qc->flags & ATA_QCFLAG_DMAMAP) {
+ if (qc->flags & ATA_QCFLAG_DMAMAP) {
nv_adma_fill_sg(qc, cpb);
ctl_flags |= NV_CPB_CTL_APRD_VALID;
} else
@@ -1435,7 +1435,7 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
and (number of cpbs to append -1) in top 8 bits */
wmb();
- if(curr_ncq != pp->last_issue_ncq) {
+ if (curr_ncq != pp->last_issue_ncq) {
/* Seems to need some delay before switching between NCQ and non-NCQ
commands, else we get command timeouts and such. */
udelay(20);
@@ -1641,12 +1641,12 @@ static void nv_error_handler(struct ata_port *ap)
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+ if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
void __iomem *mmio = pp->ctl_block;
int i;
u16 tmp;
- if(ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
+ if (ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
@@ -1660,9 +1660,9 @@ static void nv_adma_error_handler(struct ata_port *ap)
notifier, notifier_error, gen_ctl, status,
cpb_count, next_cpb_idx);
- for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+ for (i = 0; i < NV_ADMA_MAX_CPBS; i++) {
struct nv_adma_cpb *cpb = &pp->cpb[i];
- if( (ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
+ if ((ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
ap->link.sactive & (1 << i) )
ata_port_printk(ap, KERN_ERR,
"CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
@@ -1674,7 +1674,7 @@ static void nv_adma_error_handler(struct ata_port *ap)
nv_adma_register_mode(ap);
/* Mark all of the CPBs as invalid to prevent them from being executed */
- for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+ for (i = 0; i < NV_ADMA_MAX_CPBS; i++)
pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
/* clear CPB fetch count */
@@ -1683,10 +1683,10 @@ static void nv_adma_error_handler(struct ata_port *ap)
/* Reset channel */
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
@@ -2440,32 +2440,32 @@ static int nv_pci_device_resume(struct pci_dev *pdev)
int rc;
rc = ata_pci_device_do_resume(pdev);
- if(rc)
+ if (rc)
return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- if(hpriv->type >= CK804) {
+ if (hpriv->type >= CK804) {
u8 regval;
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
}
- if(hpriv->type == ADMA) {
+ if (hpriv->type == ADMA) {
u32 tmp32;
struct nv_adma_port_priv *pp;
/* enable/disable ADMA on the ports appropriately */
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
pp = host->ports[0]->private_data;
- if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
else
tmp32 |= (NV_MCP_SATA_CFG_20_PORT0_EN |
NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
pp = host->ports[1]->private_data;
- if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN |
NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
else
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index b6026bc..16b3b8a 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1091,7 +1091,7 @@ static int pdc20621_detect_dimm(struct ata_host *host)
return 0;
if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
- if(data <= 0x75)
+ if (data <= 0x75)
return 133;
} else
return 0;
@@ -1254,7 +1254,7 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
If SX4 is on PCI-X bus, after 3 seconds, the timer counter
register should be >= (0xffffffff - 3x10^8).
*/
- if(tcount >= PCI_X_TCOUNT) {
+ if (tcount >= PCI_X_TCOUNT) {
ticks = (time_period - tcount);
VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks);
OpenPOWER on IntegriCloud