2 files changed, 9 insertions, 40 deletions

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 83bc49f..ec52fc6 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -43,7 +43,7 @@
  * driver the list of errata that are relevant is below, going back to
  * PIIX4. Older device documentation is now a bit tricky to find.
  *
- * The chipsets all follow very much the same design. The orginal Triton
+ * The chipsets all follow very much the same design. The original Triton
  * series chipsets do _not_ support independant device timings, but this
  * is fixed in Triton II. With the odd mobile exception the chips then
  * change little except in gaining more modes until SATA arrives. This
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index ef37438..118c28e 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -45,16 +45,6 @@
 #define DRV_NAME "pata_pcmcia"
 #define DRV_VERSION "0.3.5"
 
-/*
- *	Private data structure to glue stuff together
- */
-
-struct ata_pcmcia_info {
-	struct pcmcia_device *pdev;
-	int		ndev;
-	dev_node_t	node;
-};
-
 /**
  *	pcmcia_set_mode	-	PCMCIA specific mode setup
  *	@link: link
@@ -248,7 +238,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 {
 	struct ata_host *host;
 	struct ata_port *ap;
-	struct ata_pcmcia_info *info;
 	struct pcmcia_config_check *stk = NULL;
 	int is_kme = 0, ret = -ENOMEM, p;
 	unsigned long io_base, ctl_base;
@@ -256,19 +245,10 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	int n_ports = 1;
 	struct ata_port_operations *ops = &pcmcia_port_ops;
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (info == NULL)
-		return -ENOMEM;
-
-	/* Glue stuff together. FIXME: We may be able to get rid of info with care */
-	info->pdev = pdev;
-	pdev->priv = info;
-
 	/* Set up attributes in order to probe card and get resources */
 	pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
 	pdev->io.IOAddrLines = 3;
-	pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	pdev->conf.Attributes = CONF_ENABLE_IRQ;
 	pdev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -293,8 +273,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	}
 	io_base = pdev->io.BasePort1;
 	ctl_base = stk->ctl_base;
-	ret = pcmcia_request_irq(pdev, &pdev->irq);
-	if (ret)
+	if (!pdev->irq)
 		goto failed;
 
 	ret = pcmcia_request_configuration(pdev, &pdev->conf);
@@ -344,21 +323,19 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	}
 
 	/* activate */
-	ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
+	ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
 				IRQF_SHARED, &pcmcia_sht);
 	if (ret)
 		goto failed;
 
-	info->ndev = 1;
+	pdev->priv = host;
 	kfree(stk);
 	return 0;
 
 failed:
 	kfree(stk);
-	info->ndev = 0;
 	pcmcia_disable_device(pdev);
 out1:
-	kfree(info);
 	return ret;
 }
 
@@ -372,20 +349,12 @@ out1:
 
 static void pcmcia_remove_one(struct pcmcia_device *pdev)
 {
-	struct ata_pcmcia_info *info = pdev->priv;
-	struct device *dev = &pdev->dev;
-
-	if (info != NULL) {
-		/* If we have attached the device to the ATA layer, detach it */
-		if (info->ndev) {
-			struct ata_host *host = dev_get_drvdata(dev);
-			ata_host_detach(host);
-		}
-		info->ndev = 0;
-		pdev->priv = NULL;
-	}
+	struct ata_host *host = pdev->priv;
+
+	if (host)
+		ata_host_detach(host);
+
 	pcmcia_disable_device(pdev);
-	kfree(info);
 }
 
 static struct pcmcia_device_id pcmcia_devices[] = {