summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig6
-rw-r--r--drivers/ata/ahci.c21
-rw-r--r--drivers/ata/ata_piix.c2
-rw-r--r--drivers/ata/libata-sff.c5
-rw-r--r--drivers/ata/pata_marvell.c51
-rw-r--r--drivers/ata/pata_sil680.c3
-rw-r--r--drivers/ata/sata_inic162x.c3
-rw-r--r--drivers/ata/sata_mv.c3
-rw-r--r--drivers/ata/sata_nv.c19
9 files changed, 68 insertions, 45 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 55d7ee4..3b54e6e 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -447,8 +447,10 @@ config PATA_MARVELL
tristate "Marvell PATA support via legacy mode"
depends on PCI
help
- This option enables limited support for the Marvell 88SE6145 ATA
- controller.
+ This option enables limited support for the Marvell 88SE61xx ATA
+ controllers. If you wish to use only the SATA ports then select
+ the AHCI driver alone. If you wish to the use the PATA port or
+ both SATA and PATA include this driver.
If unsure, say N.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c729e69..2e1a7cb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
/* board_ahci_mv */
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_MV_PATA),
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
@@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -610,6 +612,15 @@ module_param(ahci_em_messages, int, 0444);
MODULE_PARM_DESC(ahci_em_messages,
"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
static inline int ahci_nr_ports(u32 cap)
{
return (cap & 0x1f) + 1;
@@ -732,6 +743,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
"MV_AHCI HACK: port_map %x -> %x\n",
port_map,
port_map & mv);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
port_map &= mv;
}
@@ -2533,6 +2546,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* The AHCI driver can only drive the SATA ports, the PATA driver
+ can drive them all so if both drivers are selected make sure
+ AHCI stays out of the way */
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+ return -ENODEV;
+
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index b1d08a8..e6b4606 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1499,7 +1499,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
* off.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
- int rc = piix_disable_ahci(pdev);
+ rc = piix_disable_ahci(pdev);
if (rc)
return rc;
}
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 304fdc6..2a4c516 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1315,11 +1315,6 @@ fsm_start:
break;
case HSM_ST_ERR:
- /* make sure qc->err_mask is available to
- * know what's wrong and recover
- */
- WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
ap->hsm_task_state = HSM_ST_IDLE;
/* complete taskfile transaction */
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 24a011b..0d87eec 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,29 +20,30 @@
#include <linux/ata.h>
#define DRV_NAME "pata_marvell"
-#define DRV_VERSION "0.1.4"
+#define DRV_VERSION "0.1.6"
/**
- * marvell_pre_reset - check for 40/80 pin
- * @link: link
- * @deadline: deadline jiffies for the operation
+ * marvell_pata_active - check if PATA is active
+ * @pdev: PCI device
*
- * Perform the PATA port setup we need.
+ * Returns 1 if the PATA port may be active. We know how to check this
+ * for the 6145 but not the other devices
*/
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int i;
u32 devices;
void __iomem *barp;
- int i;
- /* Check if our port is enabled */
+ /* We don't yet know how to do this for other devices */
+ if (pdev->device != 0x6145)
+ return 1;
barp = pci_iomap(pdev, 5, 0x10);
if (barp == NULL)
return -ENOMEM;
+
printk("BAR5:");
for(i = 0; i <= 0x0F; i++)
printk("%02X:%02X ", i, ioread8(barp + i));
@@ -51,9 +52,27 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
devices = ioread32(barp + 0x0C);
pci_iounmap(pdev, barp);
- if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
- (!(devices & 0x10))) /* PATA enable ? */
- return -ENOENT;
+ if (devices & 0x10)
+ return 1;
+ return 0;
+}
+
+/**
+ * marvell_pre_reset - check for 40/80 pin
+ * @link: link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (pdev->device == 0x6145 && ap->port_no == 0 &&
+ !marvell_pata_active(pdev)) /* PATA enable ? */
+ return -ENOENT;
return ata_sff_prereset(link, deadline);
}
@@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+ if (!marvell_pata_active(pdev)) {
+ printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+ return -ENODEV;
+ }
+#endif
return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 720b864..e970b22 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
/* Try to acquire MMIO resources and fallback to PIO if
* that fails
*/
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
if (rc)
goto use_ioports;
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 3ead02f..5032c32 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -96,6 +96,7 @@ enum {
PORT_SCR = 0x20,
/* HOST_CTL bits */
+ HCTL_LEDEN = (1 << 3), /* enable LED operation */
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
@@ -540,7 +541,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
void __iomem *port_base = inic_port_base(ap);
/* fire up the ADMA engine */
- writew(HCTL_FTHD0, port_base + HOST_CTL);
+ writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
writeb(0, port_base + PORT_CPB_PTQFIFO);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 13c1d2a..c815f8e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
- /* RocketRAID 1740/174x have different identifiers */
+ /* RocketRAID 1720/174x have different identifiers */
+ { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 858f706..1e1f3f3 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = {
static struct ata_port_operations nv_generic_ops = {
.inherits = &ata_bmdma_port_ops,
- .hardreset = nv_hardreset,
+ .hardreset = ATA_OP_NULL,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
};
@@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
ata_sff_thaw(ap);
}
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- int rc;
-
- /* SATA hardreset fails to retrieve proper device signature on
- * some controllers. Request follow up SRST. For more info,
- * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
- */
- rc = sata_sff_hardreset(link, class, deadline);
- if (rc)
- return rc;
- return -EAGAIN;
-}
-
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
OpenPOWER on IntegriCloud