summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ahci.c2
-rw-r--r--drivers/ata/ahci.h4
-rw-r--r--drivers/ata/ata_piix.c10
-rw-r--r--drivers/ata/libata-core.c2
-rw-r--r--drivers/ata/libata-eh.c10
-rw-r--r--drivers/ata/libata-scsi.c2
-rw-r--r--drivers/ata/libata-sff.c4
-rw-r--r--drivers/ata/pata_amd.c2
-rw-r--r--drivers/ata/pata_arasan_cf.c8
-rw-r--r--drivers/ata/pata_bf54x.c2
-rw-r--r--drivers/ata/pata_cs5520.c2
-rw-r--r--drivers/ata/pata_mpiix.c2
-rw-r--r--drivers/ata/pata_rz1000.c2
-rw-r--r--drivers/ata/pata_sil680.c4
-rw-r--r--drivers/ata/pata_sis.c4
-rw-r--r--drivers/ata/pata_triflex.c2
-rw-r--r--drivers/ata/sata_fsl.c4
-rw-r--r--drivers/ata/sata_mv.c4
-rw-r--r--drivers/ata/sata_nv.c2
-rw-r--r--drivers/ata/sata_via.c2
20 files changed, 37 insertions, 37 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e62f693..39d829c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -926,7 +926,7 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
/*
* Acer eMachines G725 has the same problem. BIOS
* V1.03 is known to be broken. V3.04 is known to
- * work. Inbetween, there are V1.06, V2.06 and V3.03
+ * work. Between, there are V1.06, V2.06 and V3.03
* that we don't have much idea about. For now,
* blacklist anything older than V3.04.
*
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index ccaf081..3986500 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -225,7 +225,7 @@ enum {
/* em_ctl bits */
EM_CTL_RST = (1 << 9), /* Reset */
EM_CTL_TM = (1 << 8), /* Transmit Message */
- EM_CTL_MR = (1 << 0), /* Message Recieved */
+ EM_CTL_MR = (1 << 0), /* Message Received */
EM_CTL_ALHD = (1 << 26), /* Activity LED */
EM_CTL_XMT = (1 << 25), /* Transmit Only */
EM_CTL_SMB = (1 << 24), /* Single Message Buffer */
@@ -281,7 +281,7 @@ struct ahci_port_priv {
};
struct ahci_host_priv {
- void __iomem * mmio; /* bus-independant mem map */
+ void __iomem * mmio; /* bus-independent mem map */
unsigned int flags; /* AHCI_HFLAG_* */
u32 cap; /* cap to use */
u32 cap2; /* cap2 to use */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index cdec4ab..0bc3fd6 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -38,16 +38,16 @@
* Hardware documentation available at http://developer.intel.com/
*
* Documentation
- * Publically available from Intel web site. Errata documentation
- * is also publically available. As an aide to anyone hacking on this
+ * Publicly available from Intel web site. Errata documentation
+ * is also publicly available. As an aide to anyone hacking on this
* driver the list of errata that are relevant is below, going back to
* PIIX4. Older device documentation is now a bit tricky to find.
*
* The chipsets all follow very much the same design. The original Triton
- * series chipsets do _not_ support independant device timings, but this
+ * series chipsets do _not_ support independent device timings, but this
* is fixed in Triton II. With the odd mobile exception the chips then
* change little except in gaining more modes until SATA arrives. This
- * driver supports only the chips with independant timing (that is those
+ * driver supports only the chips with independent timing (that is those
* with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix
* for the early chip drivers.
*
@@ -122,7 +122,7 @@ enum {
P2 = 2, /* port 2 */
P3 = 3, /* port 3 */
IDE = -1, /* IDE */
- NA = -2, /* not avaliable */
+ NA = -2, /* not available */
RV = -3, /* reserved */
PIIX_AHCI_DEVICE = 6,
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b91e19c..423c0a6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5340,7 +5340,7 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
*
* Resume @host. Actual operation is performed by EH. This
* function requests EH to perform PM operations and returns.
- * Note that all resume operations are performed parallely.
+ * Note that all resume operations are performed parallelly.
*
* LOCKING:
* Kernel thread context (may sleep).
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index df3f314..88cd22f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -771,7 +771,7 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
/* process port suspend request */
ata_eh_handle_port_suspend(ap);
- /* Exception might have happend after ->error_handler
+ /* Exception might have happened after ->error_handler
* recovered the port but before this point. Repeat
* EH in such case.
*/
@@ -1742,7 +1742,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
*
* Analyze taskfile of @qc and further determine cause of
* failure. This function also requests ATAPI sense data if
- * avaliable.
+ * available.
*
* LOCKING:
* Kernel thread context (may sleep).
@@ -1893,7 +1893,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
* occurred during last 5 mins, NCQ_OFF.
*
* 3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors
- * ocurred during last 5 mins, FALLBACK_TO_PIO
+ * occurred during last 5 mins, FALLBACK_TO_PIO
*
* 4. If more than 3 TOUT_HSM or UNK_DEV errors occurred
* during last 10 mins, NCQ_OFF.
@@ -2577,7 +2577,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (link->flags & ATA_LFLAG_NO_SRST)
softreset = NULL;
- /* make sure each reset attemp is at least COOL_DOWN apart */
+ /* make sure each reset attempt is at least COOL_DOWN apart */
if (ehc->i.flags & ATA_EHI_DID_RESET) {
now = jiffies;
WARN_ON(time_after(ehc->last_reset, now));
@@ -2736,7 +2736,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (!reset) {
ata_link_printk(link, KERN_ERR,
"follow-up softreset required "
- "but no softreset avaliable\n");
+ "but no softreset available\n");
failed_link = link;
rc = -EINVAL;
goto fail;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a834199..e2f57e9e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -999,7 +999,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
* @qc: Command that we are erroring out
*
* Generate sense block for a failed ATA command @qc. Descriptor
- * format is used to accomodate LBA48 block address.
+ * format is used to accommodate LBA48 block address.
*
* LOCKING:
* None.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index cf7acbc..f8380ce 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2839,7 +2839,7 @@ unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
bmdma_stopped = true;
if (unlikely(host_stat & ATA_DMA_ERR)) {
- /* error when transfering data to/from memory */
+ /* error when transferring data to/from memory */
qc->err_mask |= AC_ERR_HOST_BUS;
ap->hsm_task_state = HSM_ST_ERR;
}
@@ -3032,7 +3032,7 @@ void ata_bmdma_start(struct ata_queued_cmd *qc)
* Or maybe I'm just being paranoid.
*
* FIXME: The posting of this write means I/O starts are
- * unneccessarily delayed for MMIO
+ * unnecessarily delayed for MMIO
*/
}
EXPORT_SYMBOL_GPL(ata_bmdma_start);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 620a07c..b0975a5 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -11,7 +11,7 @@
* Power management on ports
*
*
- * Documentation publically available.
+ * Documentation publicly available.
*/
#include <linux/kernel.h>
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 65cee74..719bb73 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -385,7 +385,7 @@ static inline int wait4buf(struct arasan_cf_dev *acdev)
return -ETIMEDOUT;
}
- /* Check if PIO Error interrupt has occured */
+ /* Check if PIO Error interrupt has occurred */
if (acdev->dma_status & ATA_DMA_ERR)
return -EAGAIN;
@@ -450,7 +450,7 @@ static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg)
/*
* For each sg:
* MAX_XFER_COUNT data will be transferred before we get transfer
- * complete interrupt. Inbetween after FIFO_SIZE data
+ * complete interrupt. Between after FIFO_SIZE data
* buffer available interrupt will be generated. At this time we will
* fill FIFO again: max FIFO_SIZE data.
*/
@@ -463,7 +463,7 @@ static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg)
acdev->vbase + XFER_CTR);
spin_unlock_irqrestore(&acdev->host->lock, flags);
- /* continue dma xfers untill current sg is completed */
+ /* continue dma xfers until current sg is completed */
while (xfer_cnt) {
/* wait for read to complete */
if (!write) {
@@ -563,7 +563,7 @@ static void data_xfer(struct work_struct *work)
chan_request_fail:
spin_lock_irqsave(&acdev->host->lock, flags);
- /* error when transfering data to/from memory */
+ /* error when transferring data to/from memory */
qc->err_mask |= AC_ERR_HOST_BUS;
qc->ap->hsm_task_state = HSM_ST_ERR;
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index e0b58b8..ea64967 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1342,7 +1342,7 @@ static unsigned int bfin_ata_host_intr(struct ata_port *ap,
ap->ops->bmdma_stop(qc);
if (unlikely(host_stat & ATA_DMA_ERR)) {
- /* error when transfering data to/from memory */
+ /* error when transferring data to/from memory */
qc->err_mask |= AC_ERR_HOST_BUS;
ap->hsm_task_state = HSM_ST_ERR;
}
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 030952f..e3254fc 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -29,7 +29,7 @@
* General Public License for more details.
*
* Documentation:
- * Not publically available.
+ * Not publicly available.
*/
#include <linux/kernel.h>
#include <linux/module.h>
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index b21f002..d8d9c58 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -15,7 +15,7 @@
* with PCI IDE and also that we do not disable the device when our driver is
* unloaded (as it has many other functions).
*
- * The driver conciously keeps this logic internally to avoid pushing quirky
+ * The driver consciously keeps this logic internally to avoid pushing quirky
* PATA history into the clean libata layer.
*
* Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 4a454a8..4d04471 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -112,7 +112,7 @@ static int rz1000_reinit_one(struct pci_dev *pdev)
if (rc)
return rc;
- /* If this fails on resume (which is a "cant happen" case), we
+ /* If this fails on resume (which is a "can't happen" case), we
must stop as any progress risks data loss */
if (rz1000_fifo_disable(pdev))
panic("rz1000 fifo");
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 00eefbd..118787c 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -11,7 +11,7 @@
*
* May be copied or modified under the terms of the GNU General Public License
*
- * Documentation publically available.
+ * Documentation publicly available.
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
@@ -43,7 +43,7 @@
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
- * Thankfully this is a configuration operation so isnt performance
+ * Thankfully this is a configuration operation so isn't performance
* criticial.
*/
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index c04abc3..be08ff9 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -331,7 +331,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
if (adev->dma_mode < XFER_UDMA_0) {
/* bits 3-0 hold recovery timing bits 8-10 active timing and
- the higher bits are dependant on the device */
+ the higher bits are dependent on the device */
timing &= ~0x870F;
timing |= mwdma_bits[speed];
} else {
@@ -371,7 +371,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
if (adev->dma_mode < XFER_UDMA_0) {
/* bits 3-0 hold recovery timing bits 8-10 active timing and
- the higher bits are dependant on the device, bit 15 udma */
+ the higher bits are dependent on the device, bit 15 udma */
timing &= ~0x870F;
timing |= mwdma_bits[speed];
} else {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 0d1f89e..03b6d69 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -30,7 +30,7 @@
* Loosely based on the piix & svwks drivers.
*
* Documentation:
- * Not publically available.
+ * Not publicly available.
*/
#include <linux/kernel.h>
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 0f91e58..35a71d8 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -42,7 +42,7 @@ enum {
/*
* SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
- * chained indirect PRDEs upto a max count of 63.
+ * chained indirect PRDEs up to a max count of 63.
* We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will
* be setup as an indirect descriptor, pointing to it's next
* (contiguous) PRDE. Though chained indirect PRDE arrays are
@@ -907,7 +907,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
ata_msleep(ap, 1);
/*
- * SATA device enters reset state after receving a Control register
+ * SATA device enters reset state after receiving a Control register
* FIS with SRST bit asserted and it awaits another H2D Control reg.
* FIS with SRST bit cleared, then the device does internal diags &
* initialization, followed by indicating it's initialization status
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index cd40651..b52c051 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1352,7 +1352,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
/*
* Workaround for 88SX60x1 FEr SATA#26:
*
- * COMRESETs have to take care not to accidently
+ * COMRESETs have to take care not to accidentally
* put the drive to sleep when writing SCR_CONTROL.
* Setting bits 12..15 prevents this problem.
*
@@ -2044,7 +2044,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
cw = &pp->crqb[in_index].ata_cmd[0];
- /* Sadly, the CRQB cannot accomodate all registers--there are
+ /* Sadly, the CRQB cannot accommodate all registers--there are
* only 11 bytes...so we must pick and choose required
* registers based on the command. So, we drop feature and
* hob_feature for [RW] DMA commands, but they are needed for
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 42344e3..f173ef3 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2121,7 +2121,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
host_stat = ap->ops->bmdma_status(ap);
if (unlikely(host_stat & ATA_DMA_ERR)) {
- /* error when transfering data to/from memory */
+ /* error when transferring data to/from memory */
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
ehi->err_mask |= AC_ERR_HOST_BUS;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 21242c5..54434db 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -582,7 +582,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
* When host issues HOLD, device may send up to 20DW of data
* before acknowledging it with HOLDA and the host should be
* able to buffer them in FIFO. Unfortunately, some WD drives
- * send upto 40DW before acknowledging HOLD and, in the
+ * send up to 40DW before acknowledging HOLD and, in the
* default configuration, this ends up overflowing vt6421's
* FIFO, making the controller abort the transaction with
* R_ERR.
OpenPOWER on IntegriCloud