diff options
Diffstat (limited to 'drivers/ata/sata_svw.c')
-rw-r--r-- | drivers/ata/sata_svw.c | 83 |
1 files changed, 40 insertions, 43 deletions
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 9c48b41..5ce4f59 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -135,31 +135,31 @@ static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ioaddr->ctl_addr); + writeb(tf->ctl, ioaddr->ctl_addr); ap->last_ctl = tf->ctl; ata_wait_idle(ap); } if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { writew(tf->feature | (((u16)tf->hob_feature) << 8), - (void __iomem *) ioaddr->feature_addr); + ioaddr->feature_addr); writew(tf->nsect | (((u16)tf->hob_nsect) << 8), - (void __iomem *) ioaddr->nsect_addr); + ioaddr->nsect_addr); writew(tf->lbal | (((u16)tf->hob_lbal) << 8), - (void __iomem *) ioaddr->lbal_addr); + ioaddr->lbal_addr); writew(tf->lbam | (((u16)tf->hob_lbam) << 8), - (void __iomem *) ioaddr->lbam_addr); + ioaddr->lbam_addr); writew(tf->lbah | (((u16)tf->hob_lbah) << 8), - (void __iomem *) ioaddr->lbah_addr); + ioaddr->lbah_addr); } else if (is_addr) { - writew(tf->feature, (void __iomem *) ioaddr->feature_addr); - writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr); + writew(tf->feature, ioaddr->feature_addr); + writew(tf->nsect, ioaddr->nsect_addr); + writew(tf->lbal, ioaddr->lbal_addr); + writew(tf->lbam, ioaddr->lbam_addr); + writew(tf->lbah, ioaddr->lbah_addr); } if (tf->flags & ATA_TFLAG_DEVICE) - writeb(tf->device, (void __iomem *) ioaddr->device_addr); + writeb(tf->device, ioaddr->device_addr); ata_wait_idle(ap); } @@ -171,12 +171,12 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) u16 nsect, lbal, lbam, lbah, feature; tf->command = k2_stat_check_status(ap); - tf->device = readw((void __iomem *)ioaddr->device_addr); - feature = readw((void __iomem *)ioaddr->error_addr); - nsect = readw((void __iomem *)ioaddr->nsect_addr); - lbal = readw((void __iomem *)ioaddr->lbal_addr); - lbam = readw((void __iomem *)ioaddr->lbam_addr); - lbah = readw((void __iomem *)ioaddr->lbah_addr); + tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); tf->feature = feature; tf->nsect = nsect; @@ -349,7 +349,7 @@ static const struct ata_port_operations k2_sata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, + .data_xfer = ata_data_xfer, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, @@ -361,7 +361,7 @@ static const struct ata_port_operations k2_sata_ops = { .port_start = ata_port_start, }; -static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) +static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) { port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; port->data_addr = base + K2_SATA_TF_DATA_OFFSET; @@ -386,7 +386,6 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; struct device *dev = &pdev->dev; struct ata_probe_ent *probe_ent; - unsigned long base; void __iomem *mmio_base; const struct k2_board_info *board_info = &k2_board_info[ent->driver_data]; @@ -410,12 +409,12 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e if (pci_resource_len(pdev, 5) == 0) return -ENODEV; - /* Request PCI regions */ - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { + /* Request and iomap PCI regions */ + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc == -EBUSY) pcim_pin_device(pdev); + if (rc) return rc; - } rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) @@ -431,22 +430,6 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = pcim_iomap(pdev, 5, 0); - if (mmio_base == NULL) - return -ENOMEM; - base = (unsigned long) mmio_base; - - /* Clear a magic bit in SCR1 according to Darwin, those help - * some funky seagate drives (though so far, those were already - * set by the firmware on the machines I had access to) - */ - writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, - mmio_base + K2_SATA_SICR1_OFFSET); - - /* Clear SATA error & interrupts we don't use */ - writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); - writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); - probe_ent->sht = &k2_sata_sht; probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | board_info->port_flags; @@ -454,7 +437,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; + probe_ent->iomap = pcim_iomap_table(pdev); /* We don't care much about the PIO/UDMA masks, but the core won't like us * if we don't fill these @@ -463,11 +446,25 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->mwdma_mask = 0x7; probe_ent->udma_mask = 0x7f; + mmio_base = probe_ent->iomap[5]; + /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no * longer available. This should not be seen in any system. */ for (i = 0; i < board_info->n_ports; i++) - k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET); + k2_sata_setup_port(&probe_ent->port[i], + mmio_base + i * K2_SATA_PORT_OFFSET); + + /* Clear a magic bit in SCR1 according to Darwin, those help + * some funky seagate drives (though so far, those were already + * set by the firmware on the machines I had access to) + */ + writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, + mmio_base + K2_SATA_SICR1_OFFSET); + + /* Clear SATA error & interrupts we don't use */ + writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); + writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); pci_set_master(pdev); |