diff options
Diffstat (limited to 'drivers/ata/pata_hpt3x2n.c')
| -rw-r--r-- | drivers/ata/pata_hpt3x2n.c | 61 |
1 files changed, 49 insertions, 12 deletions
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 32f3463..97c6ded 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2010 MontaVista Software, Inc. * * * TODO @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.10" +#define DRV_VERSION "0.3.11" enum { HPT_PCI_FAST = (1 << 31), @@ -113,6 +113,22 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed) } /** + * hpt372n_filter - mode selection filter + * @adev: ATA device + * @mask: mode mask + * + * The Marvell bridge chips used on the HighPoint SATA cards do not seem + * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... + */ +static unsigned long hpt372n_filter(struct ata_device *adev, unsigned long mask) +{ + if (ata_id_is_sata(adev->id)) + mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA); + + return mask; +} + +/** * hpt3x2n_cable_detect - Detect the cable type * @ap: ATA port to detect on * @@ -328,10 +344,10 @@ static struct scsi_host_template hpt3x2n_sht = { }; /* - * Configuration for HPT3x2n. + * Configuration for HPT302N/371N. */ -static struct ata_port_operations hpt3x2n_port_ops = { +static struct ata_port_operations hpt3xxn_port_ops = { .inherits = &ata_bmdma_port_ops, .bmdma_stop = hpt3x2n_bmdma_stop, @@ -345,6 +361,15 @@ static struct ata_port_operations hpt3x2n_port_ops = { .prereset = hpt3x2n_pre_reset, }; +/* + * Configuration for HPT372N. Same as 302N/371N but we have a mode filter. + */ + +static struct ata_port_operations hpt372n_port_ops = { + .inherits = &hpt3xxn_port_ops, + .mode_filter = &hpt372n_filter, +}; + /** * hpt3xn_calibrate_dpll - Calibrate the DPLL loop * @dev: PCI device @@ -437,15 +462,23 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - /* HPT372N and friends - UDMA133 */ - static const struct ata_port_info info = { + /* HPT372N - UDMA133 */ + static const struct ata_port_info info_hpt372n = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, - .port_ops = &hpt3x2n_port_ops + .port_ops = &hpt372n_port_ops }; - const struct ata_port_info *ppi[] = { &info, NULL }; + /* HPT302N and HPT371N - UDMA133 */ + static const struct ata_port_info info_hpt3xxn = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &hpt3xxn_port_ops + }; + const struct ata_port_info *ppi[] = { &info_hpt3xxn, NULL }; u8 rev = dev->revision; u8 irqmask; unsigned int pci_mhz; @@ -461,24 +494,28 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) switch(dev->device) { case PCI_DEVICE_ID_TTI_HPT366: + /* 372N if rev >= 6 */ if (rev < 6) return -ENODEV; - break; + goto hpt372n; case PCI_DEVICE_ID_TTI_HPT371: + /* 371N if rev >= 2 */ if (rev < 2) return -ENODEV; - /* 371N if rev > 1 */ break; case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 2*/ + /* 372N if rev >= 2 */ if (rev < 2) return -ENODEV; - break; + goto hpt372n; case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev >= 2 */ if (rev < 2) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT372N: +hpt372n: + ppi[0] = &info_hpt372n; break; default: printk(KERN_ERR "pata_hpt3x2n: PCI table is bogus please report (%d).\n", dev->device); |
