diff options
Diffstat (limited to 'drivers/ata/pata_hpt3x2n.c')
| -rw-r--r-- | drivers/ata/pata_hpt3x2n.c | 40 |
1 files changed, 18 insertions, 22 deletions
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 3d59fe0..9a09a1b 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.4" +#define DRV_VERSION "0.3.7" enum { HPT_PCI_FAST = (1 << 31), @@ -80,14 +80,13 @@ static struct hpt_clock hpt3x2n_clocks[] = { { XFER_MW_DMA_2, 0x2c829c62 }, { XFER_MW_DMA_1, 0x2c829c66 }, - { XFER_MW_DMA_0, 0x2c829d2c }, + { XFER_MW_DMA_0, 0x2c829d2e }, { XFER_PIO_4, 0x0c829c62 }, { XFER_PIO_3, 0x0c829c84 }, { XFER_PIO_2, 0x0c829ca6 }, { XFER_PIO_1, 0x0d029d26 }, { XFER_PIO_0, 0x0d029d5e }, - { 0, 0x0d029d5e } }; /** @@ -128,12 +127,15 @@ static int hpt3x2n_cable_detect(struct ata_port *ap) pci_read_config_byte(pdev, 0x5B, &scr2); pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); + + udelay(10); /* debounce */ + /* Cable register now active */ pci_read_config_byte(pdev, 0x5A, &ata66); /* Restore state */ pci_write_config_byte(pdev, 0x5B, scr2); - if (ata66 & (1 << ap->port_no)) + if (ata66 & (2 >> ap->port_no)) return ATA_CBL_PATA40; else return ATA_CBL_PATA80; @@ -185,9 +187,8 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_read_config_dword(pdev, addr1, ®); mode = hpt3x2n_find_mode(ap, adev->pio_mode); - mode &= ~0x8000000; /* No FIFO in PIO */ - mode &= ~0x30070000; /* Leave config bits alone */ - reg &= 0x30070000; /* Strip timing bits */ + mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ + reg &= ~0xCFC3FFFF; /* Strip timing bits */ pci_write_config_dword(pdev, addr1, reg | mode); } @@ -204,8 +205,7 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr1, addr2; - u32 reg; - u32 mode; + u32 reg, mode, mask; u8 fast; addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); @@ -216,11 +216,12 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); + mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; + pci_read_config_dword(pdev, addr1, ®); mode = hpt3x2n_find_mode(ap, adev->dma_mode); - mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ - mode &= ~0xC0000000; /* Leave config bits alone */ - reg &= 0xC0000000; /* Strip timing bits */ + mode &= mask; + reg &= ~mask; pci_write_config_dword(pdev, addr1, reg | mode); } @@ -447,10 +448,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt3x2n_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; - + u8 rev = dev->revision; u8 irqmask; - u32 class_rev; - unsigned int pci_mhz; unsigned int f_low, f_high; int adjust; @@ -462,26 +461,23 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (rc) return rc; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xFF; - switch(dev->device) { case PCI_DEVICE_ID_TTI_HPT366: - if (class_rev < 6) + if (rev < 6) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT371: - if (class_rev < 2) + if (rev < 2) return -ENODEV; /* 371N if rev > 1 */ break; case PCI_DEVICE_ID_TTI_HPT372: /* 372N if rev >= 2*/ - if (class_rev < 2) + if (rev < 2) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT302: - if (class_rev < 2) + if (rev < 2) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT372N: |
