diff options
Diffstat (limited to 'drivers/ata/pata_cs5520.c')
-rw-r--r-- | drivers/ata/pata_cs5520.c | 39 |
1 files changed, 1 insertions, 38 deletions
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 0df83cf..95ebdac 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -90,48 +90,12 @@ static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int } /** - * cs5520_enable_dma - turn on DMA bits - * - * Turn on the DMA bits for this disk. Needed because the BIOS probably - * has not done the work for us. Belongs in the core SATA code. - */ - -static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev) -{ - /* Set the DMA enable/disable flag */ - u8 reg = ioread8(ap->ioaddr.bmdma_addr + 0x02); - reg |= 1<<(adev->devno + 5); - iowrite8(reg, ap->ioaddr.bmdma_addr + 0x02); -} - -/** - * cs5520_set_dmamode - program DMA timings - * @ap: ATA port - * @adev: ATA device - * - * Program the DMA mode timings for the controller according to the pio - * clocking table. Note that this device sets the DMA timings to PIO - * mode values. This may seem bizarre but the 5520 architecture talks - * PIO mode to the disk and DMA mode to the controller so the underlying - * transfers are PIO timed. - */ - -static void cs5520_set_dmamode(struct ata_port *ap, struct ata_device *adev) -{ - static const int dma_xlate[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 }; - cs5520_set_timings(ap, adev, dma_xlate[adev->dma_mode]); - cs5520_enable_dma(ap, adev); -} - -/** * cs5520_set_piomode - program PIO timings * @ap: ATA port * @adev: ATA device * * Program the PIO mode timings for the controller according to the pio - * clocking table. We know pio_mode will equal dma_mode because of the - * CS5520 architecture. At least once we turned DMA on and wrote a - * mode setter. + * clocking table. */ static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -149,7 +113,6 @@ static struct ata_port_operations cs5520_port_ops = { .qc_prep = ata_sff_dumb_qc_prep, .cable_detect = ata_cable_40wire, .set_piomode = cs5520_set_piomode, - .set_dmamode = cs5520_set_dmamode, }; static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) |