diff options
Diffstat (limited to 'drivers/ata/pata_cmd64x.c')
| -rw-r--r-- | drivers/ata/pata_cmd64x.c | 505 |
1 files changed, 505 insertions, 0 deletions
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c new file mode 100644 index 0000000..03284611 --- /dev/null +++ b/drivers/ata/pata_cmd64x.c @@ -0,0 +1,505 @@ +/* + * pata_cmd64x.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox <alan@redhat.com> + * + * Based upon + * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 + * + * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. + * Note, this driver is not used at all on other systems because + * there the "BIOS" has done all of the following already. + * Due to massive hardware bugs, UltraDMA is only supported + * on the 646U2 and not on the 646U. + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * + * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> + * + * TODO + * Testing work + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_cmd64x" +#define DRV_VERSION "0.2.1" + +/* + * CMD64x specific registers definition. + */ + +enum { + CFR = 0x50, + CFR_INTR_CH0 = 0x02, + CNTRL = 0x51, + CNTRL_DIS_RA0 = 0x40, + CNTRL_DIS_RA1 = 0x80, + CNTRL_ENA_2ND = 0x08, + CMDTIM = 0x52, + ARTTIM0 = 0x53, + DRWTIM0 = 0x54, + ARTTIM1 = 0x55, + DRWTIM1 = 0x56, + ARTTIM23 = 0x57, + ARTTIM23_DIS_RA2 = 0x04, + ARTTIM23_DIS_RA3 = 0x08, + ARTTIM23_INTR_CH1 = 0x10, + ARTTIM2 = 0x57, + ARTTIM3 = 0x57, + DRWTIM23 = 0x58, + DRWTIM2 = 0x58, + BRST = 0x59, + DRWTIM3 = 0x5b, + BMIDECR0 = 0x70, + MRDMODE = 0x71, + MRDMODE_INTR_CH0 = 0x04, + MRDMODE_INTR_CH1 = 0x08, + MRDMODE_BLK_CH0 = 0x10, + MRDMODE_BLK_CH1 = 0x20, + BMIDESR0 = 0x72, + UDIDETCR0 = 0x73, + DTPR0 = 0x74, + BMIDECR1 = 0x78, + BMIDECSR = 0x79, + BMIDESR1 = 0x7A, + UDIDETCR1 = 0x7B, + DTPR1 = 0x7C +}; + +static int cmd64x_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static int cmd648_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 r; + + /* Check cable detect bits */ + pci_read_config_byte(pdev, BMIDECSR, &r); + if (r & (1 << ap->port_no)) + ap->cbl = ATA_CBL_PATA80; + else + ap->cbl = ATA_CBL_PATA40; + + return ata_std_prereset(ap); +} + +static void cmd64x_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +static void cmd648_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * cmd64x_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; + + u8 reg; + + /* Port layout is not logical so use a table */ + const u8 arttim_port[2][2] = { + { ARTTIM0, ARTTIM1 }, + { ARTTIM23, ARTTIM23 } + }; + const u8 drwtim_port[2][2] = { + { DRWTIM0, DRWTIM1 }, + { DRWTIM2, DRWTIM3 } + }; + + int arttim = arttim_port[ap->port_no][adev->devno]; + int drwtim = drwtim_port[ap->port_no][adev->devno]; + + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { + printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); + return; + } + if (ap->port_no) { + /* Slave has shared address setup */ + struct ata_device *pair = ata_dev_pair(adev); + + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + } + + printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n", + t.active, t.recover, t.setup); + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; + } + if (t.active > 16) + t.active = 16; + + /* Now convert the clocks into values we can actually stuff into + the chip */ + + if (t.recover > 1) + t.recover--; + else + t.recover = 15; + + if (t.setup > 4) + t.setup = 0xC0; + else + t.setup = setup_data[t.setup]; + + t.active &= 0x0F; /* 0 = 16 */ + + /* Load setup timing */ + pci_read_config_byte(pdev, arttim, ®); + reg &= 0x3F; + reg |= t.setup; + pci_write_config_byte(pdev, arttim, reg); + + /* Load active/recovery */ + pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover); +} + +/** + * cmd64x_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 udma_data[] = { + 0x31, 0x21, 0x11, 0x25, 0x15, 0x05 + }; + static const u8 mwdma_data[] = { + 0x30, 0x20, 0x10 + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 regU, regD; + + int pciU = UDIDETCR0 + 8 * ap->port_no; + int pciD = BMIDESR0 + 8 * ap->port_no; + int shift = 2 * adev->devno; + + pci_read_config_byte(pdev, pciD, ®D); + pci_read_config_byte(pdev, pciU, ®U); + + regD &= ~(0x20 << shift); + regU &= ~(0x35 << shift); + + if (adev->dma_mode >= XFER_UDMA_0) + regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift; + else + regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift; + + regD |= 0x20 << adev->devno; + + pci_write_config_byte(pdev, pciU, regU); + pci_write_config_byte(pdev, pciD, regD); +} + +/** + * cmd648_dma_stop - DMA stop callback + * @qc: Command in progress + * + * DMA has completed. + */ + +static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 dma_intr; + int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; + int dma_mask = ap->port_no ? ARTTIM2 : CFR; + + ata_bmdma_stop(qc); + + pci_read_config_byte(pdev, dma_reg, &dma_intr); + pci_write_config_byte(pdev, dma_reg, dma_intr | dma_mask); +} + +/** + * cmd646r1_dma_stop - DMA stop callback + * @qc: Command in progress + * + * Stub for now while investigating the r1 quirk in the old driver. + */ + +static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); +} + +static struct scsi_host_template cmd64x_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations cmd64x_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd64x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations cmd646r1_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd64x_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = cmd646r1_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations cmd648_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd64x_set_piomode, + .set_dmamode = cmd64x_set_dmamode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cmd648_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = cmd648_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u32 class_rev; + + static struct ata_port_info cmd_info[6] = { + { /* CMD 643 - no UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 with broken UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 with working UDMA */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA1, + .port_ops = &cmd64x_port_ops + }, + { /* CMD 646 rev 1 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cmd646r1_port_ops + }, + { /* CMD 648 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA2, + .port_ops = &cmd648_port_ops + }, + { /* CMD 649 */ + .sht = &cmd64x_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA3, + .port_ops = &cmd648_port_ops + } + }; + static struct ata_port_info *port_info[2], *info; + u8 mrdmode; + + info = &cmd_info[id->driver_data]; + + pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xFF; + + if (id->driver_data == 0) /* 643 */ + ata_pci_clear_simplex(pdev); + + if (pdev->device == PCI_DEVICE_ID_CMD_646) { + /* Does UDMA work ? */ + if (class_rev > 4) + info = &cmd_info[2]; + /* Early rev with other problems ? */ + else if (class_rev == 1) + info = &cmd_info[3]; + } + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); + pci_read_config_byte(pdev, MRDMODE, &mrdmode); + mrdmode &= ~ 0x30; /* IRQ set up */ + mrdmode |= 0x02; /* Memory read line enable */ + pci_write_config_byte(pdev, MRDMODE, mrdmode); + + /* Force PIO 0 here.. */ + + /* PPC specific fixup copied from old driver */ +#ifdef CONFIG_PPC + pci_write_config_byte(pdev, UDIDETCR0, 0xF0); +#endif + + port_info[0] = port_info[1] = info; + return ata_pci_init_one(pdev, port_info, 2); +} + +static struct pci_device_id cmd64x[] = { + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, + { 0, }, +}; + +static struct pci_driver cmd64x_pci_driver = { + .name = DRV_NAME, + .id_table = cmd64x, + .probe = cmd64x_init_one, + .remove = ata_pci_remove_one +}; + +static int __init cmd64x_init(void) +{ + return pci_register_driver(&cmd64x_pci_driver); +} + + +static void __exit cmd64x_exit(void) +{ + pci_unregister_driver(&cmd64x_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cmd64x); +MODULE_VERSION(DRV_VERSION); + +module_init(cmd64x_init); +module_exit(cmd64x_exit); |
