summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_cmd64x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_cmd64x.c')
-rw-r--r--drivers/ata/pata_cmd64x.c42
1 files changed, 38 insertions, 4 deletions
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 905ff76..7bafc16 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -41,6 +41,9 @@
enum {
CFR = 0x50,
CFR_INTR_CH0 = 0x04,
+ CNTRL = 0x51,
+ CNTRL_CH0 = 0x04,
+ CNTRL_CH1 = 0x08,
CMDTIM = 0x52,
ARTTIM0 = 0x53,
DRWTIM0 = 0x54,
@@ -328,9 +331,19 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &cmd648_port_ops
}
};
- const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
- u8 mrdmode;
+ const struct ata_port_info *ppi[] = {
+ &cmd_info[id->driver_data],
+ &cmd_info[id->driver_data],
+ NULL
+ };
+ u8 mrdmode, reg;
int rc;
+ struct pci_dev *bridge = pdev->bus->self;
+ /* mobility split bridges don't report enabled ports correctly */
+ int port_ok = !(bridge && bridge->vendor ==
+ PCI_VENDOR_ID_MOBILITY_ELECTRONICS);
+ /* all (with exceptions below) apart from 643 have CNTRL_CH0 bit */
+ int cntrl_ch0_ok = (id->driver_data != 0);
rc = pcim_enable_device(pdev);
if (rc)
@@ -341,11 +354,18 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
- if (pdev->revision > 4)
+ if (pdev->revision > 4) {
ppi[0] = &cmd_info[2];
+ ppi[1] = &cmd_info[2];
+ }
/* Early rev with other problems ? */
- else if (pdev->revision == 1)
+ else if (pdev->revision == 1) {
ppi[0] = &cmd_info[3];
+ ppi[1] = &cmd_info[3];
+ }
+ /* revs 1,2 have no CNTRL_CH0 */
+ if (pdev->revision < 3)
+ cntrl_ch0_ok = 0;
}
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
@@ -354,6 +374,20 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
mrdmode |= 0x02; /* Memory read line enable */
pci_write_config_byte(pdev, MRDMODE, mrdmode);
+ /* check for enabled ports */
+ pci_read_config_byte(pdev, CNTRL, &reg);
+ if (!port_ok)
+ dev_printk(KERN_NOTICE, &pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
+ if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Primary port is disabled\n");
+ ppi[0] = &ata_dummy_port_info;
+
+ }
+ if (port_ok && !(reg & CNTRL_CH1)) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Secondary port is disabled\n");
+ ppi[1] = &ata_dummy_port_info;
+ }
+
/* Force PIO 0 here.. */
/* PPC specific fixup copied from old driver */
OpenPOWER on IntegriCloud