summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libata-zpodd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libata-zpodd.c')
-rw-r--r--drivers/ata/libata-zpodd.c299
1 files changed, 299 insertions, 0 deletions
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
new file mode 100644
index 0000000..90b159b
--- /dev/null
+++ b/drivers/ata/libata-zpodd.c
@@ -0,0 +1,299 @@
+#include <linux/libata.h>
+#include <linux/cdrom.h>
+#include <linux/pm_runtime.h>
+#include <linux/module.h>
+#include <scsi/scsi_device.h>
+
+#include "libata.h"
+
+static int zpodd_poweroff_delay = 30; /* 30 seconds for power off delay */
+module_param(zpodd_poweroff_delay, int, 0644);
+MODULE_PARM_DESC(zpodd_poweroff_delay, "Poweroff delay for ZPODD in seconds");
+
+enum odd_mech_type {
+ ODD_MECH_TYPE_SLOT,
+ ODD_MECH_TYPE_DRAWER,
+ ODD_MECH_TYPE_UNSUPPORTED,
+};
+
+struct zpodd {
+ enum odd_mech_type mech_type; /* init during probe, RO afterwards */
+ struct ata_device *dev;
+
+ /* The following fields are synchronized by PM core. */
+ bool from_notify; /* resumed as a result of
+ * acpi wake notification */
+ bool zp_ready; /* ZP ready state */
+ unsigned long last_ready; /* last ZP ready timestamp */
+ bool zp_sampled; /* ZP ready state sampled */
+ bool powered_off; /* ODD is powered off
+ * during suspend */
+};
+
+static int eject_tray(struct ata_device *dev)
+{
+ struct ata_taskfile tf = {};
+ const char cdb[] = { GPCMD_START_STOP_UNIT,
+ 0, 0, 0,
+ 0x02, /* LoEj */
+ 0, 0, 0, 0, 0, 0, 0,
+ };
+
+ tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.command = ATA_CMD_PACKET;
+ tf.protocol = ATAPI_PROT_NODATA;
+
+ return ata_exec_internal(dev, &tf, cdb, DMA_NONE, NULL, 0, 0);
+}
+
+/* Per the spec, only slot type and drawer type ODD can be supported */
+static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
+{
+ char buf[16];
+ unsigned int ret;
+ struct rm_feature_desc *desc = (void *)(buf + 8);
+ struct ata_taskfile tf = {};
+
+ char cdb[] = { GPCMD_GET_CONFIGURATION,
+ 2, /* only 1 feature descriptor requested */
+ 0, 3, /* 3, removable medium feature */
+ 0, 0, 0,/* reserved */
+ 0, sizeof(buf),
+ 0, 0, 0,
+ };
+
+ tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.command = ATA_CMD_PACKET;
+ tf.protocol = ATAPI_PROT_PIO;
+ tf.lbam = sizeof(buf);
+
+ ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
+ buf, sizeof(buf), 0);
+ if (ret)
+ return ODD_MECH_TYPE_UNSUPPORTED;
+
+ if (be16_to_cpu(desc->feature_code) != 3)
+ return ODD_MECH_TYPE_UNSUPPORTED;
+
+ if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1)
+ return ODD_MECH_TYPE_SLOT;
+ else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1)
+ return ODD_MECH_TYPE_DRAWER;
+ else
+ return ODD_MECH_TYPE_UNSUPPORTED;
+}
+
+static bool odd_can_poweroff(struct ata_device *ata_dev)
+{
+ acpi_handle handle;
+ acpi_status status;
+ struct acpi_device *acpi_dev;
+
+ handle = ata_dev_acpi_handle(ata_dev);
+ if (!handle)
+ return false;
+
+ status = acpi_bus_get_device(handle, &acpi_dev);
+ if (ACPI_FAILURE(status))
+ return false;
+
+ return acpi_device_can_poweroff(acpi_dev);
+}
+
+/* Test if ODD is zero power ready by sense code */
+static bool zpready(struct ata_device *dev)
+{
+ u8 sense_key, *sense_buf;
+ unsigned int ret, asc, ascq, add_len;
+ struct zpodd *zpodd = dev->zpodd;
+
+ ret = atapi_eh_tur(dev, &sense_key);
+
+ if (!ret || sense_key != NOT_READY)
+ return false;
+
+ sense_buf = dev->link->ap->sector_buf;
+ ret = atapi_eh_request_sense(dev, sense_buf, sense_key);
+ if (ret)
+ return false;
+
+ /* sense valid */
+ if ((sense_buf[0] & 0x7f) != 0x70)
+ return false;
+
+ add_len = sense_buf[7];
+ /* has asc and ascq */
+ if (add_len < 6)
+ return false;
+
+ asc = sense_buf[12];
+ ascq = sense_buf[13];
+
+ if (zpodd->mech_type == ODD_MECH_TYPE_SLOT)
+ /* no media inside */
+ return asc == 0x3a;
+ else
+ /* no media inside and door closed */
+ return asc == 0x3a && ascq == 0x01;
+}
+
+/*
+ * Update the zpodd->zp_ready field. This field will only be set
+ * if the ODD has stayed in ZP ready state for zpodd_poweroff_delay
+ * time, and will be used to decide if power off is allowed. If it
+ * is set, it will be cleared during resume from powered off state.
+ */
+void zpodd_on_suspend(struct ata_device *dev)
+{
+ struct zpodd *zpodd = dev->zpodd;
+ unsigned long expires;
+
+ if (!zpready(dev)) {
+ zpodd->zp_sampled = false;
+ zpodd->zp_ready = false;
+ return;
+ }
+
+ if (!zpodd->zp_sampled) {
+ zpodd->zp_sampled = true;
+ zpodd->last_ready = jiffies;
+ return;
+ }
+
+ expires = zpodd->last_ready +
+ msecs_to_jiffies(zpodd_poweroff_delay * 1000);
+ if (time_before(jiffies, expires))
+ return;
+
+ zpodd->zp_ready = true;
+}
+
+bool zpodd_zpready(struct ata_device *dev)
+{
+ struct zpodd *zpodd = dev->zpodd;
+ return zpodd->zp_ready;
+}
+
+/*
+ * Enable runtime wake capability through ACPI and set the powered_off flag,
+ * this flag will be used during resume to decide what operations are needed
+ * to take.
+ *
+ * Also, media poll needs to be silenced, so that it doesn't bring the ODD
+ * back to full power state every few seconds.
+ */
+void zpodd_enable_run_wake(struct ata_device *dev)
+{
+ struct zpodd *zpodd = dev->zpodd;
+
+ sdev_disable_disk_events(dev->sdev);
+
+ zpodd->powered_off = true;
+ device_set_run_wake(&dev->sdev->sdev_gendev, true);
+ acpi_pm_device_run_wake(&dev->sdev->sdev_gendev, true);
+}
+
+/* Disable runtime wake capability if it is enabled */
+void zpodd_disable_run_wake(struct ata_device *dev)
+{
+ struct zpodd *zpodd = dev->zpodd;
+
+ if (zpodd->powered_off) {
+ acpi_pm_device_run_wake(&dev->sdev->sdev_gendev, false);
+ device_set_run_wake(&dev->sdev->sdev_gendev, false);
+ }
+}
+
+/*
+ * Post power on processing after the ODD has been recovered. If the
+ * ODD wasn't powered off during suspend, it doesn't do anything.
+ *
+ * For drawer type ODD, if it is powered on due to user pressed the
+ * eject button, the tray needs to be ejected. This can only be done
+ * after the ODD has been recovered, i.e. link is initialized and
+ * device is able to process NON_DATA PIO command, as eject needs to
+ * send command for the ODD to process.
+ *
+ * The from_notify flag set in wake notification handler function
+ * zpodd_wake_dev represents if power on is due to user's action.
+ *
+ * For both types of ODD, several fields need to be reset.
+ */
+void zpodd_post_poweron(struct ata_device *dev)
+{
+ struct zpodd *zpodd = dev->zpodd;
+
+ if (!zpodd->powered_off)
+ return;
+
+ zpodd->powered_off = false;
+
+ if (zpodd->from_notify) {
+ zpodd->from_notify = false;
+ if (zpodd->mech_type == ODD_MECH_TYPE_DRAWER)
+ eject_tray(dev);
+ }
+
+ zpodd->zp_sampled = false;
+ zpodd->zp_ready = false;
+
+ sdev_enable_disk_events(dev->sdev);
+}
+
+static void zpodd_wake_dev(acpi_handle handle, u32 event, void *context)
+{
+ struct ata_device *ata_dev = context;
+ struct zpodd *zpodd = ata_dev->zpodd;
+ struct device *dev = &ata_dev->sdev->sdev_gendev;
+
+ if (event == ACPI_NOTIFY_DEVICE_WAKE && pm_runtime_suspended(dev)) {
+ zpodd->from_notify = true;
+ pm_runtime_resume(dev);
+ }
+}
+
+static void ata_acpi_add_pm_notifier(struct ata_device *dev)
+{
+ acpi_handle handle = ata_dev_acpi_handle(dev);
+ acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ zpodd_wake_dev, dev);
+}
+
+static void ata_acpi_remove_pm_notifier(struct ata_device *dev)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->sdev->sdev_gendev);
+ acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, zpodd_wake_dev);
+}
+
+void zpodd_init(struct ata_device *dev)
+{
+ enum odd_mech_type mech_type;
+ struct zpodd *zpodd;
+
+ if (dev->zpodd)
+ return;
+
+ if (!odd_can_poweroff(dev))
+ return;
+
+ mech_type = zpodd_get_mech_type(dev);
+ if (mech_type == ODD_MECH_TYPE_UNSUPPORTED)
+ return;
+
+ zpodd = kzalloc(sizeof(struct zpodd), GFP_KERNEL);
+ if (!zpodd)
+ return;
+
+ zpodd->mech_type = mech_type;
+
+ ata_acpi_add_pm_notifier(dev);
+ zpodd->dev = dev;
+ dev->zpodd = zpodd;
+}
+
+void zpodd_exit(struct ata_device *dev)
+{
+ ata_acpi_remove_pm_notifier(dev);
+ kfree(dev->zpodd);
+ dev->zpodd = NULL;
+}
OpenPOWER on IntegriCloud