1 files changed, 288 insertions, 128 deletions

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 19ddf92..efa4a18 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -63,7 +63,6 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.sff_tf_read		= ata_sff_tf_read,
 	.sff_exec_command	= ata_sff_exec_command,
 	.sff_data_xfer		= ata_sff_data_xfer,
-	.sff_irq_clear		= ata_sff_irq_clear,
 	.sff_drain_fifo		= ata_sff_drain_fifo,
 
 	.lost_interrupt		= ata_sff_lost_interrupt,
@@ -395,33 +394,12 @@ void ata_sff_irq_on(struct ata_port *ap)
 		ata_sff_set_devctl(ap, ap->ctl);
 	ata_wait_idle(ap);
 
-	ap->ops->sff_irq_clear(ap);
+	if (ap->ops->sff_irq_clear)
+		ap->ops->sff_irq_clear(ap);
 }
 EXPORT_SYMBOL_GPL(ata_sff_irq_on);
 
 /**
- *	ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
- *	@ap: Port associated with this ATA transaction.
- *
- *	Clear interrupt and error flags in DMA status register.
- *
- *	May be used as the irq_clear() entry in ata_port_operations.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_sff_irq_clear(struct ata_port *ap)
-{
-	void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
-	if (!mmio)
-		return;
-
-	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
-}
-EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
-
-/**
  *	ata_sff_tf_load - send taskfile registers to host controller
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
@@ -820,11 +798,15 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
 	case ATAPI_PROT_NODATA:
 		ap->hsm_task_state = HSM_ST_LAST;
 		break;
+#ifdef CONFIG_ATA_BMDMA
 	case ATAPI_PROT_DMA:
 		ap->hsm_task_state = HSM_ST_LAST;
 		/* initiate bmdma */
 		ap->ops->bmdma_start(qc);
 		break;
+#endif /* CONFIG_ATA_BMDMA */
+	default:
+		BUG();
 	}
 }
 
@@ -1491,27 +1473,27 @@ bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
 }
 EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
 
-/**
- *	ata_sff_host_intr - Handle host interrupt for given (port, task)
- *	@ap: Port on which interrupt arrived (possibly...)
- *	@qc: Taskfile currently active in engine
- *
- *	Handle host interrupt for given queued command.  Currently,
- *	only DMA interrupts are handled.  All other commands are
- *	handled via polling with interrupts disabled (nIEN bit).
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	One if interrupt was handled, zero if not (shared irq).
- */
-unsigned int ata_sff_host_intr(struct ata_port *ap,
-				      struct ata_queued_cmd *qc)
+static unsigned int ata_sff_idle_irq(struct ata_port *ap)
 {
-	struct ata_eh_info *ehi = &ap->link.eh_info;
-	u8 status, host_stat = 0;
-	bool bmdma_stopped = false;
+	ap->stats.idle_irq++;
+
+#ifdef ATA_IRQ_TRAP
+	if ((ap->stats.idle_irq % 1000) == 0) {
+		ap->ops->sff_check_status(ap);
+		if (ap->ops->sff_irq_clear)
+			ap->ops->sff_irq_clear(ap);
+		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+		return 1;
+	}
+#endif
+	return 0;	/* irq not handled */
+}
+
+static unsigned int __ata_sff_port_intr(struct ata_port *ap,
+					struct ata_queued_cmd *qc,
+					bool hsmv_on_idle)
+{
+	u8 status;
 
 	VPRINTK("ata%u: protocol %d task_state %d\n",
 		ap->print_id, qc->tf.protocol, ap->hsm_task_state);
@@ -1528,90 +1510,56 @@ unsigned int ata_sff_host_intr(struct ata_port *ap,
 		 * need to check ata_is_atapi(qc->tf.protocol) again.
 		 */
 		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
-			goto idle_irq;
-		break;
-	case HSM_ST_LAST:
-		if (qc->tf.protocol == ATA_PROT_DMA ||
-		    qc->tf.protocol == ATAPI_PROT_DMA) {
-			/* check status of DMA engine */
-			host_stat = ap->ops->bmdma_status(ap);
-			VPRINTK("ata%u: host_stat 0x%X\n",
-				ap->print_id, host_stat);
-
-			/* if it's not our irq... */
-			if (!(host_stat & ATA_DMA_INTR))
-				goto idle_irq;
-
-			/* before we do anything else, clear DMA-Start bit */
-			ap->ops->bmdma_stop(qc);
-			bmdma_stopped = true;
-
-			if (unlikely(host_stat & ATA_DMA_ERR)) {
-				/* error when transfering data to/from memory */
-				qc->err_mask |= AC_ERR_HOST_BUS;
-				ap->hsm_task_state = HSM_ST_ERR;
-			}
-		}
+			return ata_sff_idle_irq(ap);
 		break;
 	case HSM_ST:
+	case HSM_ST_LAST:
 		break;
 	default:
-		goto idle_irq;
+		return ata_sff_idle_irq(ap);
 	}
 
-
 	/* check main status, clearing INTRQ if needed */
 	status = ata_sff_irq_status(ap);
 	if (status & ATA_BUSY) {
-		if (bmdma_stopped) {
+		if (hsmv_on_idle) {
 			/* BMDMA engine is already stopped, we're screwed */
 			qc->err_mask |= AC_ERR_HSM;
 			ap->hsm_task_state = HSM_ST_ERR;
 		} else
-			goto idle_irq;
+			return ata_sff_idle_irq(ap);
 	}
 
 	/* clear irq events */
-	ap->ops->sff_irq_clear(ap);
+	if (ap->ops->sff_irq_clear)
+		ap->ops->sff_irq_clear(ap);
 
 	ata_sff_hsm_move(ap, qc, status, 0);
 
-	if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
-				       qc->tf.protocol == ATAPI_PROT_DMA))
-		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
-
 	return 1;	/* irq handled */
-
-idle_irq:
-	ap->stats.idle_irq++;
-
-#ifdef ATA_IRQ_TRAP
-	if ((ap->stats.idle_irq % 1000) == 0) {
-		ap->ops->sff_check_status(ap);
-		ap->ops->sff_irq_clear(ap);
-		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
-		return 1;
-	}
-#endif
-	return 0;	/* irq not handled */
 }
-EXPORT_SYMBOL_GPL(ata_sff_host_intr);
 
 /**
- *	ata_sff_interrupt - Default ATA host interrupt handler
- *	@irq: irq line (unused)
- *	@dev_instance: pointer to our ata_host information structure
+ *	ata_sff_port_intr - Handle SFF port interrupt
+ *	@ap: Port on which interrupt arrived (possibly...)
+ *	@qc: Taskfile currently active in engine
  *
- *	Default interrupt handler for PCI IDE devices.  Calls
- *	ata_sff_host_intr() for each port that is not disabled.
+ *	Handle port interrupt for given queued command.
  *
  *	LOCKING:
- *	Obtains host lock during operation.
+ *	spin_lock_irqsave(host lock)
  *
  *	RETURNS:
- *	IRQ_NONE or IRQ_HANDLED.
+ *	One if interrupt was handled, zero if not (shared irq).
  */
-irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+unsigned int ata_sff_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+	return __ata_sff_port_intr(ap, qc, false);
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_intr);
+
+static inline irqreturn_t __ata_sff_interrupt(int irq, void *dev_instance,
+	unsigned int (*port_intr)(struct ata_port *, struct ata_queued_cmd *))
 {
 	struct ata_host *host = dev_instance;
 	bool retried = false;
@@ -1631,7 +1579,7 @@ retry:
 		qc = ata_qc_from_tag(ap, ap->link.active_tag);
 		if (qc) {
 			if (!(qc->tf.flags & ATA_TFLAG_POLLING))
-				handled |= ata_sff_host_intr(ap, qc);
+				handled |= port_intr(ap, qc);
 			else
 				polling |= 1 << i;
 		} else
@@ -1658,7 +1606,8 @@ retry:
 
 			if (idle & (1 << i)) {
 				ap->ops->sff_check_status(ap);
-				ap->ops->sff_irq_clear(ap);
+				if (ap->ops->sff_irq_clear)
+					ap->ops->sff_irq_clear(ap);
 			} else {
 				/* clear INTRQ and check if BUSY cleared */
 				if (!(ap->ops->sff_check_status(ap) & ATA_BUSY))
@@ -1680,6 +1629,25 @@ retry:
 
 	return IRQ_RETVAL(handled);
 }
+
+/**
+ *	ata_sff_interrupt - Default SFF ATA host interrupt handler
+ *	@irq: irq line (unused)
+ *	@dev_instance: pointer to our ata_host information structure
+ *
+ *	Default interrupt handler for PCI IDE devices.  Calls
+ *	ata_sff_port_intr() for each port that is not disabled.
+ *
+ *	LOCKING:
+ *	Obtains host lock during operation.
+ *
+ *	RETURNS:
+ *	IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+{
+	return __ata_sff_interrupt(irq, dev_instance, ata_sff_port_intr);
+}
 EXPORT_SYMBOL_GPL(ata_sff_interrupt);
 
 /**
@@ -1717,7 +1685,7 @@ void ata_sff_lost_interrupt(struct ata_port *ap)
 								status);
 	/* Run the host interrupt logic as if the interrupt had not been
 	   lost */
-	ata_sff_host_intr(ap, qc);
+	ata_sff_port_intr(ap, qc);
 }
 EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
 
@@ -1744,7 +1712,8 @@ void ata_sff_freeze(struct ata_port *ap)
 	 */
 	ap->ops->sff_check_status(ap);
 
-	ap->ops->sff_irq_clear(ap);
+	if (ap->ops->sff_irq_clear)
+		ap->ops->sff_irq_clear(ap);
 }
 EXPORT_SYMBOL_GPL(ata_sff_freeze);
 
@@ -1761,7 +1730,8 @@ void ata_sff_thaw(struct ata_port *ap)
 {
 	/* clear & re-enable interrupts */
 	ap->ops->sff_check_status(ap);
-	ap->ops->sff_irq_clear(ap);
+	if (ap->ops->sff_irq_clear)
+		ap->ops->sff_irq_clear(ap);
 	ata_sff_irq_on(ap);
 }
 EXPORT_SYMBOL_GPL(ata_sff_thaw);
@@ -2349,13 +2319,13 @@ int ata_pci_sff_init_host(struct ata_host *host)
 EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
 
 /**
- *	ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
+ *	ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host
  *	@pdev: target PCI device
  *	@ppi: array of port_info, must be enough for two ports
  *	@r_host: out argument for the initialized ATA host
  *
- *	Helper to allocate ATA host for @pdev, acquire all native PCI
- *	resources and initialize it accordingly in one go.
+ *	Helper to allocate PIO-only SFF ATA host for @pdev, acquire
+ *	all PCI resources and initialize it accordingly in one go.
  *
  *	LOCKING:
  *	Inherited from calling layer (may sleep).
@@ -2385,9 +2355,6 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
 	if (rc)
 		goto err_out;
 
-	/* init DMA related stuff */
-	ata_pci_bmdma_init(host);
-
 	devres_remove_group(&pdev->dev, NULL);
 	*r_host = host;
 	return 0;
@@ -2492,8 +2459,21 @@ out:
 }
 EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
 
+static const struct ata_port_info *ata_sff_find_valid_pi(
+					const struct ata_port_info * const *ppi)
+{
+	int i;
+
+	/* look up the first valid port_info */
+	for (i = 0; i < 2 && ppi[i]; i++)
+		if (ppi[i]->port_ops != &ata_dummy_port_ops)
+			return ppi[i];
+
+	return NULL;
+}
+
 /**
- *	ata_pci_sff_init_one - Initialize/register PCI IDE host controller
+ *	ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
  *	@pdev: Controller to be initialized
  *	@ppi: array of port_info, must be enough for two ports
  *	@sht: scsi_host_template to use when registering the host
@@ -2502,11 +2482,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
  *
  *	This is a helper function which can be called from a driver's
  *	xxx_init_one() probe function if the hardware uses traditional
- *	IDE taskfile registers.
- *
- *	This function calls pci_enable_device(), reserves its register
- *	regions, sets the dma mask, enables bus master mode, and calls
- *	ata_device_add()
+ *	IDE taskfile registers and is PIO only.
  *
  *	ASSUMPTION:
  *	Nobody makes a single channel controller that appears solely as
@@ -2523,20 +2499,13 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 		 struct scsi_host_template *sht, void *host_priv, int hflag)
 {
 	struct device *dev = &pdev->dev;
-	const struct ata_port_info *pi = NULL;
+	const struct ata_port_info *pi;
 	struct ata_host *host = NULL;
-	int i, rc;
+	int rc;
 
 	DPRINTK("ENTER\n");
 
-	/* look up the first valid port_info */
-	for (i = 0; i < 2 && ppi[i]; i++) {
-		if (ppi[i]->port_ops != &ata_dummy_port_ops) {
-			pi = ppi[i];
-			break;
-		}
-	}
-
+	pi = ata_sff_find_valid_pi(ppi);
 	if (!pi) {
 		dev_printk(KERN_ERR, &pdev->dev,
 			   "no valid port_info specified\n");
@@ -2557,7 +2526,6 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 	host->private_data = host_priv;
 	host->flags |= hflag;
 
-	pci_set_master(pdev);
 	rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
 out:
 	if (rc == 0)
@@ -2571,6 +2539,12 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
 
 #endif /* CONFIG_PCI */
 
+/*
+ *	BMDMA support
+ */
+
+#ifdef CONFIG_ATA_BMDMA
+
 const struct ata_port_operations ata_bmdma_port_ops = {
 	.inherits		= &ata_sff_port_ops,
 
@@ -2580,6 +2554,7 @@ const struct ata_port_operations ata_bmdma_port_ops = {
 	.qc_prep		= ata_bmdma_qc_prep,
 	.qc_issue		= ata_bmdma_qc_issue,
 
+	.sff_irq_clear		= ata_bmdma_irq_clear,
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
@@ -2804,6 +2779,75 @@ unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
 EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue);
 
 /**
+ *	ata_bmdma_port_intr - Handle BMDMA port interrupt
+ *	@ap: Port on which interrupt arrived (possibly...)
+ *	@qc: Taskfile currently active in engine
+ *
+ *	Handle port interrupt for given queued command.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	One if interrupt was handled, zero if not (shared irq).
+ */
+unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	u8 host_stat = 0;
+	bool bmdma_stopped = false;
+	unsigned int handled;
+
+	if (ap->hsm_task_state == HSM_ST_LAST && ata_is_dma(qc->tf.protocol)) {
+		/* check status of DMA engine */
+		host_stat = ap->ops->bmdma_status(ap);
+		VPRINTK("ata%u: host_stat 0x%X\n", ap->print_id, host_stat);
+
+		/* if it's not our irq... */
+		if (!(host_stat & ATA_DMA_INTR))
+			return ata_sff_idle_irq(ap);
+
+		/* before we do anything else, clear DMA-Start bit */
+		ap->ops->bmdma_stop(qc);
+		bmdma_stopped = true;
+
+		if (unlikely(host_stat & ATA_DMA_ERR)) {
+			/* error when transfering data to/from memory */
+			qc->err_mask |= AC_ERR_HOST_BUS;
+			ap->hsm_task_state = HSM_ST_ERR;
+		}
+	}
+
+	handled = __ata_sff_port_intr(ap, qc, bmdma_stopped);
+
+	if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
+		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
+	return handled;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_intr);
+
+/**
+ *	ata_bmdma_interrupt - Default BMDMA ATA host interrupt handler
+ *	@irq: irq line (unused)
+ *	@dev_instance: pointer to our ata_host information structure
+ *
+ *	Default interrupt handler for PCI IDE devices.  Calls
+ *	ata_bmdma_port_intr() for each port that is not disabled.
+ *
+ *	LOCKING:
+ *	Obtains host lock during operation.
+ *
+ *	RETURNS:
+ *	IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance)
+{
+	return __ata_sff_interrupt(irq, dev_instance, ata_bmdma_port_intr);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_interrupt);
+
+/**
  *	ata_bmdma_error_handler - Stock error handler for BMDMA controller
  *	@ap: port to handle error for
  *
@@ -2848,7 +2892,8 @@ void ata_bmdma_error_handler(struct ata_port *ap)
 		/* if we're gonna thaw, make sure IRQ is clear */
 		if (thaw) {
 			ap->ops->sff_check_status(ap);
-			ap->ops->sff_irq_clear(ap);
+			if (ap->ops->sff_irq_clear)
+				ap->ops->sff_irq_clear(ap);
 		}
 	}
 
@@ -2882,6 +2927,28 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
 EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
 
 /**
+ *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Clear interrupt and error flags in DMA status register.
+ *
+ *	May be used as the irq_clear() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	if (!mmio)
+		return;
+
+	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+
+/**
  *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
  *	@qc: Info associated with this ATA transaction.
  *
@@ -3137,7 +3204,100 @@ void ata_pci_bmdma_init(struct ata_host *host)
 }
 EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
 
+/**
+ *	ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host
+ *	@pdev: target PCI device
+ *	@ppi: array of port_info, must be enough for two ports
+ *	@r_host: out argument for the initialized ATA host
+ *
+ *	Helper to allocate BMDMA ATA host for @pdev, acquire all PCI
+ *	resources and initialize it accordingly in one go.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+			       const struct ata_port_info * const * ppi,
+			       struct ata_host **r_host)
+{
+	int rc;
+
+	rc = ata_pci_sff_prepare_host(pdev, ppi, r_host);
+	if (rc)
+		return rc;
+
+	ata_pci_bmdma_init(*r_host);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host);
+
+/**
+ *	ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller
+ *	@pdev: Controller to be initialized
+ *	@ppi: array of port_info, must be enough for two ports
+ *	@sht: scsi_host_template to use when registering the host
+ *	@host_priv: host private_data
+ *	@hflags: host flags
+ *
+ *	This function is similar to ata_pci_sff_init_one() but also
+ *	takes care of BMDMA initialization.
+ *
+ *	LOCKING:
+ *	Inherited from PCI layer (may sleep).
+ *
+ *	RETURNS:
+ *	Zero on success, negative on errno-based value on error.
+ */
+int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+			   const struct ata_port_info * const * ppi,
+			   struct scsi_host_template *sht, void *host_priv,
+			   int hflags)
+{
+	struct device *dev = &pdev->dev;
+	const struct ata_port_info *pi;
+	struct ata_host *host = NULL;
+	int rc;
+
+	DPRINTK("ENTER\n");
+
+	pi = ata_sff_find_valid_pi(ppi);
+	if (!pi) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "no valid port_info specified\n");
+		return -EINVAL;
+	}
+
+	if (!devres_open_group(dev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		goto out;
+
+	/* prepare and activate BMDMA host */
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+	if (rc)
+		goto out;
+	host->private_data = host_priv;
+	host->flags |= hflags;
+
+	pci_set_master(pdev);
+	rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+ out:
+	if (rc == 0)
+		devres_remove_group(&pdev->dev, NULL);
+	else
+		devres_release_group(&pdev->dev, NULL);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
+
 #endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
 
 /**
  *	ata_sff_port_init - Initialize SFF/BMDMA ATA port