diff options
Diffstat (limited to 'drivers/ata/libata-scsi.c')
-rw-r--r-- | drivers/ata/libata-scsi.c | 255 |
1 files changed, 232 insertions, 23 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 8ec81ca..e3bda074 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1655,7 +1655,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) if (unlikely(scmd->cmd_len < 10)) goto invalid_fld; scsi_10_lba_len(cdb, &block, &n_block); - if (unlikely(cdb[1] & (1 << 3))) + if (cdb[1] & (1 << 3)) tf_flags |= ATA_TFLAG_FUA; break; case READ_6: @@ -1675,7 +1675,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) if (unlikely(scmd->cmd_len < 16)) goto invalid_fld; scsi_16_lba_len(cdb, &block, &n_block); - if (unlikely(cdb[1] & (1 << 3))) + if (cdb[1] & (1 << 3)) tf_flags |= ATA_TFLAG_FUA; break; default: @@ -2205,9 +2205,33 @@ static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf) } /** + * modecpy - Prepare response for MODE SENSE + * @dest: output buffer + * @src: data being copied + * @n: length of mode page + * @changeable: whether changeable parameters are requested + * + * Generate a generic MODE SENSE page for either current or changeable + * parameters. + * + * LOCKING: + * None. + */ +static void modecpy(u8 *dest, const u8 *src, int n, bool changeable) +{ + if (changeable) { + memcpy(dest, src, 2); + memset(dest + 2, 0, n - 2); + } else { + memcpy(dest, src, n); + } +} + +/** * ata_msense_caching - Simulate MODE SENSE caching info page * @id: device IDENTIFY data * @buf: output buffer + * @changeable: whether changeable parameters are requested * * Generate a caching info page, which conditionally indicates * write caching to the SCSI layer, depending on device @@ -2216,12 +2240,12 @@ static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf) * LOCKING: * None. */ -static unsigned int ata_msense_caching(u16 *id, u8 *buf) +static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable) { - memcpy(buf, def_cache_mpage, sizeof(def_cache_mpage)); - if (ata_id_wcache_enabled(id)) + modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable); + if (changeable || ata_id_wcache_enabled(id)) buf[2] |= (1 << 2); /* write cache enable */ - if (!ata_id_rahead_enabled(id)) + if (!changeable && !ata_id_rahead_enabled(id)) buf[12] |= (1 << 5); /* disable read ahead */ return sizeof(def_cache_mpage); } @@ -2229,30 +2253,33 @@ static unsigned int ata_msense_caching(u16 *id, u8 *buf) /** * ata_msense_ctl_mode - Simulate MODE SENSE control mode page * @buf: output buffer + * @changeable: whether changeable parameters are requested * * Generate a generic MODE SENSE control mode page. * * LOCKING: * None. */ -static unsigned int ata_msense_ctl_mode(u8 *buf) +static unsigned int ata_msense_ctl_mode(u8 *buf, bool changeable) { - memcpy(buf, def_control_mpage, sizeof(def_control_mpage)); + modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable); return sizeof(def_control_mpage); } /** * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page * @buf: output buffer + * @changeable: whether changeable parameters are requested * * Generate a generic MODE SENSE r/w error recovery page. * * LOCKING: * None. */ -static unsigned int ata_msense_rw_recovery(u8 *buf) +static unsigned int ata_msense_rw_recovery(u8 *buf, bool changeable) { - memcpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage)); + modecpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage), + changeable); return sizeof(def_rw_recovery_mpage); } @@ -2316,11 +2343,11 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) page_control = scsicmd[2] >> 6; switch (page_control) { case 0: /* current */ + case 1: /* changeable */ + case 2: /* defaults */ break; /* supported */ case 3: /* saved */ goto saving_not_supp; - case 1: /* changeable */ - case 2: /* defaults */ default: goto invalid_fld; } @@ -2341,21 +2368,21 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) switch(pg) { case RW_RECOVERY_MPAGE: - p += ata_msense_rw_recovery(p); + p += ata_msense_rw_recovery(p, page_control == 1); break; case CACHE_MPAGE: - p += ata_msense_caching(args->id, p); + p += ata_msense_caching(args->id, p, page_control == 1); break; case CONTROL_MPAGE: - p += ata_msense_ctl_mode(p); + p += ata_msense_ctl_mode(p, page_control == 1); break; case ALL_MPAGES: - p += ata_msense_rw_recovery(p); - p += ata_msense_caching(args->id, p); - p += ata_msense_ctl_mode(p); + p += ata_msense_rw_recovery(p, page_control == 1); + p += ata_msense_caching(args->id, p, page_control == 1); + p += ata_msense_ctl_mode(p, page_control == 1); break; default: /* invalid page code */ @@ -3080,6 +3107,188 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) } /** + * ata_mselect_caching - Simulate MODE SELECT for caching info page + * @qc: Storage for translated ATA taskfile + * @buf: input buffer + * @len: number of valid bytes in the input buffer + * + * Prepare a taskfile to modify caching information for the device. + * + * LOCKING: + * None. + */ +static int ata_mselect_caching(struct ata_queued_cmd *qc, + const u8 *buf, int len) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + char mpage[CACHE_MPAGE_LEN]; + u8 wce; + + /* + * The first two bytes of def_cache_mpage are a header, so offsets + * in mpage are off by 2 compared to buf. Same for len. + */ + + if (len != CACHE_MPAGE_LEN - 2) + return -EINVAL; + + wce = buf[0] & (1 << 2); + + /* + * Check that read-only bits are not modified. + */ + ata_msense_caching(dev->id, mpage, false); + mpage[2] &= ~(1 << 2); + mpage[2] |= wce; + if (memcmp(mpage + 2, buf, CACHE_MPAGE_LEN - 2) != 0) + return -EINVAL; + + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + tf->nsect = 0; + tf->command = ATA_CMD_SET_FEATURES; + tf->feature = wce ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF; + return 0; +} + +/** + * ata_scsiop_mode_select - Simulate MODE SELECT 6, 10 commands + * @qc: Storage for translated ATA taskfile + * + * Converts a MODE SELECT command to an ATA SET FEATURES taskfile. + * Assume this is invoked for direct access devices (e.g. disks) only. + * There should be no block descriptor for other device types. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + const u8 *cdb = scmd->cmnd; + const u8 *p; + u8 pg, spg; + unsigned six_byte, pg_len, hdr_len, bd_len; + int len; + + VPRINTK("ENTER\n"); + + six_byte = (cdb[0] == MODE_SELECT); + if (six_byte) { + if (scmd->cmd_len < 5) + goto invalid_fld; + + len = cdb[4]; + hdr_len = 4; + } else { + if (scmd->cmd_len < 9) + goto invalid_fld; + + len = (cdb[7] << 8) + cdb[8]; + hdr_len = 8; + } + + /* We only support PF=1, SP=0. */ + if ((cdb[1] & 0x11) != 0x10) + goto invalid_fld; + + /* Test early for possible overrun. */ + if (!scsi_sg_count(scmd) || scsi_sglist(scmd)->length < len) + goto invalid_param_len; + + p = page_address(sg_page(scsi_sglist(scmd))); + + /* Move past header and block descriptors. */ + if (len < hdr_len) + goto invalid_param_len; + + if (six_byte) + bd_len = p[3]; + else + bd_len = (p[6] << 8) + p[7]; + + len -= hdr_len; + p += hdr_len; + if (len < bd_len) + goto invalid_param_len; + if (bd_len != 0 && bd_len != 8) + goto invalid_param; + + len -= bd_len; + p += bd_len; + if (len == 0) + goto skip; + + /* Parse both possible formats for the mode page headers. */ + pg = p[0] & 0x3f; + if (p[0] & 0x40) { + if (len < 4) + goto invalid_param_len; + + spg = p[1]; + pg_len = (p[2] << 8) | p[3]; + p += 4; + len -= 4; + } else { + if (len < 2) + goto invalid_param_len; + + spg = 0; + pg_len = p[1]; + p += 2; + len -= 2; + } + + /* + * No mode subpages supported (yet) but asking for _all_ + * subpages may be valid + */ + if (spg && (spg != ALL_SUB_MPAGES)) + goto invalid_param; + if (pg_len > len) + goto invalid_param_len; + + switch (pg) { + case CACHE_MPAGE: + if (ata_mselect_caching(qc, p, pg_len) < 0) + goto invalid_param; + break; + + default: /* invalid page code */ + goto invalid_param; + } + + /* + * Only one page has changeable data, so we only support setting one + * page at a time. + */ + if (len > pg_len) + goto invalid_param; + + return 0; + + invalid_fld: + /* "Invalid field in CDB" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); + return 1; + + invalid_param: + /* "Invalid field in parameter list" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x26, 0x0); + return 1; + + invalid_param_len: + /* "Parameter list length error" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x1a, 0x0); + return 1; + + skip: + scmd->result = SAM_STAT_GOOD; + return 1; +} + +/** * ata_get_xlat_func - check if SCSI to ATA translation is possible * @dev: ATA device * @cmd: SCSI command opcode to consider @@ -3119,6 +3328,11 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case ATA_16: return ata_scsi_pass_thru; + case MODE_SELECT: + case MODE_SELECT_10: + return ata_scsi_mode_select_xlat; + break; + case START_STOP: return ata_scsi_start_stop_xlat; } @@ -3311,11 +3525,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); break; - case MODE_SELECT: /* unconditionally return */ - case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_scsi_invalid_field(cmd); - break; - case READ_CAPACITY: ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); break; |