diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 32 |
1 files changed, 26 insertions, 6 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8e1039c..3492aa7 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -774,7 +774,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, tf->lbam = (block >> 8) & 0xff; tf->lbal = block & 0xff; - tf->device = 1 << 6; + tf->device = ATA_LBA; if (tf->flags & ATA_TFLAG_FUA) tf->device |= 1 << 7; } else if (dev->flags & ATA_DFLAG_LBA) { @@ -2155,6 +2155,7 @@ int ata_dev_configure(struct ata_device *dev) int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; unsigned long xfer_mask; + unsigned int err_mask; char revbuf[7]; /* XYZ-99\0 */ char fwrevbuf[ATA_ID_FW_REV_LEN+1]; char modelbuf[ATA_ID_PROD_LEN+1]; @@ -2323,6 +2324,26 @@ int ata_dev_configure(struct ata_device *dev) } } + /* check and mark DevSlp capability */ + if (ata_id_has_devslp(dev->id)) + dev->flags |= ATA_DFLAG_DEVSLP; + + /* Obtain SATA Settings page from Identify Device Data Log, + * which contains DevSlp timing variables etc. + * Exclude old devices with ata_id_has_ncq() + */ + if (ata_id_has_ncq(dev->id)) { + err_mask = ata_read_log_page(dev, + ATA_LOG_SATA_ID_DEV_DATA, + ATA_LOG_SATA_SETTINGS, + dev->sata_settings, + 1); + if (err_mask) + ata_dev_dbg(dev, + "failed to get Identify Device Data, Emask 0x%x\n", + err_mask); + } + dev->cdb_len = 16; } @@ -2351,8 +2372,6 @@ int ata_dev_configure(struct ata_device *dev) (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && (!sata_pmp_attached(ap) || sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { - unsigned int err_mask; - /* issue SET feature command to turn this on */ err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE, SATA_AN); @@ -3598,7 +3617,7 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, switch (policy) { case ATA_LPM_MAX_POWER: /* disable all LPM transitions */ - scontrol |= (0x3 << 8); + scontrol |= (0x7 << 8); /* initiate transition to active state */ if (spm_wakeup) { scontrol |= (0x4 << 12); @@ -3608,12 +3627,12 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, case ATA_LPM_MED_POWER: /* allow LPM to PARTIAL */ scontrol &= ~(0x1 << 8); - scontrol |= (0x2 << 8); + scontrol |= (0x6 << 8); break; case ATA_LPM_MIN_POWER: if (ata_link_nr_enabled(link) > 0) /* no restrictions on LPM transitions */ - scontrol &= ~(0x3 << 8); + scontrol &= ~(0x7 << 8); else { /* empty port, power off */ scontrol &= ~0xf; @@ -4472,6 +4491,7 @@ unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; } +EXPORT_SYMBOL_GPL(ata_dev_set_feature); /** * ata_dev_init_params - Issue INIT DEV PARAMS command |
