diff options
Diffstat (limited to 'drivers/ata/ata_piix.c')
| -rw-r--r-- | drivers/ata/ata_piix.c | 71 |
1 files changed, 71 insertions, 0 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 887d8f4..ef8b30d 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1289,6 +1289,39 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev, return map; } +static bool piix_no_sidpr(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* + * Samsung DB-P70 only has three ATA ports exposed and + * curiously the unconnected first port reports link online + * while not responding to SRST protocol causing excessive + * detection delay. + * + * Unfortunately, the system doesn't carry enough DMI + * information to identify the machine but does have subsystem + * vendor and device set. As it's unclear whether the + * subsystem vendor/device is used only for this specific + * board, the port can't be disabled solely with the + * information; however, turning off SIDPR access works around + * the problem. Turn it off. + * + * This problem is reported in bnc#441240. + * + * https://bugzilla.novell.com/show_bug.cgi?id=441420 + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 && + pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG && + pdev->subsystem_device == 0xb049) { + dev_printk(KERN_WARNING, host->dev, + "Samsung DB-P70 detected, disabling SIDPR\n"); + return true; + } + + return false; +} + static int __devinit piix_init_sidpr(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); @@ -1302,6 +1335,10 @@ static int __devinit piix_init_sidpr(struct ata_host *host) if (hpriv->map[i] == IDE) return 0; + /* is it blacklisted? */ + if (piix_no_sidpr(host)) + return 0; + if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR)) return 0; @@ -1387,6 +1424,32 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host) } } +static bool piix_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq 2510p", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -1422,6 +1485,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev, if (!in_module_init) return -ENODEV; + if (piix_broken_system_poweroff(pdev)) { + piix_port_info[ent->driver_data].flags |= + ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + port_info[0] = piix_port_info[ent->driver_data]; port_info[1] = piix_port_info[ent->driver_data]; |
