summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ahci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/ahci.c')
-rw-r--r--drivers/ata/ahci.c84
1 files changed, 79 insertions, 5 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 15a2303..fe3eba5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -219,6 +219,8 @@ enum {
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+ link offline */
/* ap->flags bits */
@@ -513,11 +515,16 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -1658,6 +1665,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
@@ -1696,12 +1704,21 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
/* wait for link to become ready */
rc = ata_wait_after_reset(link, deadline, check_ready);
- /* link occupied, -ENODEV too is an error */
- if (rc) {
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+ /*
+ * Workaround for cases where link online status can't
+ * be trusted. Treat device readiness timeout as link
+ * offline.
+ */
+ ata_link_printk(link, KERN_INFO,
+ "device not ready, treating as offline\n");
+ *class = ATA_DEV_NONE;
+ } else if (rc) {
+ /* link occupied, -ENODEV too is an error */
reason = "device not ready";
goto fail;
- }
- *class = ahci_dev_classify(ap);
+ } else
+ *class = ahci_dev_classify(ap);
DPRINTK("EXIT, class=%u\n", *class);
return 0;
@@ -1768,7 +1785,8 @@ static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
irq_sts = readl(port_mmio + PORT_IRQ_STAT);
if (irq_sts & PORT_IRQ_BAD_PMP) {
ata_link_printk(link, KERN_WARNING,
- "failed due to HW bug, retry pmp=0\n");
+ "applying SB600 PMP SRST workaround "
+ "and retrying\n");
rc = ahci_do_softreset(link, class, 0, deadline,
ahci_check_ready);
}
@@ -2721,6 +2739,56 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
return !ver || strcmp(ver, dmi->driver_data) < 0;
}
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func) \
+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * There are several gigabyte boards which use
+ * SIMG5723s configured as hardware RAID. Certain
+ * 5723 firmware revisions shipped there keep the link
+ * online but fail to answer properly to SRST or
+ * IDENTIFY when no device is attached downstream
+ * causing libata to retry quite a few times leading
+ * to excessive detection delay.
+ *
+ * As these firmwares respond to the second reset try
+ * with invalid device signature, considering unknown
+ * sig as offline works around the problem acceptably.
+ */
+ {
+ .ident = "EP45-DQ6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+ },
+ {
+ .ident = "EP45-DS5",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+ },
+ { } /* terminate list */
+ };
+#undef ENCODE_BUSDEVFN
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int val;
+
+ if (!dmi)
+ return false;
+
+ val = (unsigned long)dmi->driver_data;
+
+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
@@ -2836,6 +2904,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
"BIOS update required for suspend/resume\n");
}
+ if (ahci_broken_online(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+ dev_info(&pdev->dev,
+ "online status unreliable, applying workaround\n");
+ }
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
OpenPOWER on IntegriCloud