diff options
Diffstat (limited to 'drivers/acpi')
| -rw-r--r-- | drivers/acpi/Kconfig | 84 | ||||
| -rw-r--r-- | drivers/acpi/Makefile | 3 | ||||
| -rw-r--r-- | drivers/acpi/asus_acpi.c | 1460 | ||||
| -rw-r--r-- | drivers/acpi/toshiba_acpi.c | 863 | ||||
| -rw-r--r-- | drivers/acpi/wmi.c | 747 |
5 files changed, 0 insertions, 3157 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index b0243fd..d7f9839 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -196,90 +196,6 @@ config ACPI_NUMA depends on (X86 || IA64) default y if IA64_GENERIC || IA64_SGI_SN2 -config ACPI_WMI - tristate "WMI (EXPERIMENTAL)" - depends on X86 - depends on EXPERIMENTAL - help - This driver adds support for the ACPI-WMI (Windows Management - Instrumentation) mapper device (PNP0C14) found on some systems. - - ACPI-WMI is a proprietary extension to ACPI to expose parts of the - ACPI firmware to userspace - this is done through various vendor - defined methods and data blocks in a PNP0C14 device, which are then - made available for userspace to call. - - The implementation of this in Linux currently only exposes this to - other kernel space drivers. - - This driver is a required dependency to build the firmware specific - drivers needed on many machines, including Acer and HP laptops. - - It is safe to enable this driver even if your DSDT doesn't define - any ACPI-WMI devices. - -config ACPI_ASUS - tristate "ASUS/Medion Laptop Extras" - depends on X86 - select BACKLIGHT_CLASS_DEVICE - ---help--- - This driver provides support for extra features of ACPI-compatible - ASUS laptops. As some of Medion laptops are made by ASUS, it may also - support some Medion laptops (such as 9675 for example). It makes all - the extra buttons generate standard ACPI events that go through - /proc/acpi/events, and (on some models) adds support for changing the - display brightness and output, switching the LCD backlight on and off, - and most importantly, allows you to blink those fancy LEDs intended - for reporting mail and wireless status. - - Note: display switching code is currently considered EXPERIMENTAL, - toying with these values may even lock your machine. - - All settings are changed via /proc/acpi/asus directory entries. Owner - and group for these entries can be set with asus_uid and asus_gid - parameters. - - More information and a userspace daemon for handling the extra buttons - at <http://sourceforge.net/projects/acpi4asus/>. - - If you have an ACPI-compatible ASUS laptop, say Y or M here. This - driver is still under development, so if your laptop is unsupported or - something works not quite as expected, please use the mailing list - available on the above page (acpi4asus-user@lists.sourceforge.net). - - NOTE: This driver is deprecated and will probably be removed soon, - use asus-laptop instead. - -config ACPI_TOSHIBA - tristate "Toshiba Laptop Extras" - depends on X86 && INPUT - select INPUT_POLLDEV - select NET - select RFKILL - select BACKLIGHT_CLASS_DEVICE - ---help--- - This driver adds support for access to certain system settings - on "legacy free" Toshiba laptops. These laptops can be recognized by - their lack of a BIOS setup menu and APM support. - - On these machines, all system configuration is handled through the - ACPI. This driver is required for access to controls not covered - by the general ACPI drivers, such as LCD brightness, video output, - etc. - - This driver differs from the non-ACPI Toshiba laptop driver (located - under "Processor type and features") in several aspects. - Configuration is accessed by reading and writing text files in the - /proc tree instead of by program interface to /dev. Furthermore, no - power management functions are exposed, as those are handled by the - general ACPI drivers. - - More information about this driver is available at - <http://memebeam.org/toys/ToshibaAcpiDriver>. - - If you have a legacy free Toshiba laptop (such as the Libretto L1 - series), say Y. - config ACPI_CUSTOM_DSDT_FILE string "Custom DSDT Table file to include" default "" diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 3c0c933..f64af36 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -59,9 +59,6 @@ obj-y += power.o obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o -obj-$(CONFIG_ACPI_WMI) += wmi.o -obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o -obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o obj-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o obj-$(CONFIG_ACPI_SBS) += sbshc.o diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c deleted file mode 100644 index 1e74988..0000000 --- a/drivers/acpi/asus_acpi.c +++ /dev/null @@ -1,1460 +0,0 @@ -/* - * asus_acpi.c - Asus Laptop ACPI Extras - * - * - * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * The development page for this driver is located at - * http://sourceforge.net/projects/acpi4asus/ - * - * Credits: - * Pontus Fuchs - Helper functions, cleanup - * Johann Wiesner - Small compile fixes - * John Belmonte - ACPI code for Toshiba laptop was a good starting point. - * �ic Burghard - LED display support for W1N - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/proc_fs.h> -#include <linux/backlight.h> -#include <acpi/acpi_drivers.h> -#include <acpi/acpi_bus.h> -#include <asm/uaccess.h> - -#define ASUS_ACPI_VERSION "0.30" - -#define PROC_ASUS "asus" /* The directory */ -#define PROC_MLED "mled" -#define PROC_WLED "wled" -#define PROC_TLED "tled" -#define PROC_BT "bluetooth" -#define PROC_LEDD "ledd" -#define PROC_INFO "info" -#define PROC_LCD "lcd" -#define PROC_BRN "brn" -#define PROC_DISP "disp" - -#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver" -#define ACPI_HOTK_CLASS "hotkey" -#define ACPI_HOTK_DEVICE_NAME "Hotkey" - -/* - * Some events we use, same for all Asus - */ -#define BR_UP 0x10 -#define BR_DOWN 0x20 - -/* - * Flags for hotk status - */ -#define MLED_ON 0x01 /* Mail LED */ -#define WLED_ON 0x02 /* Wireless LED */ -#define TLED_ON 0x04 /* Touchpad LED */ -#define BT_ON 0x08 /* Internal Bluetooth */ - -MODULE_AUTHOR("Julien Lerouge, Karol Kozimor"); -MODULE_DESCRIPTION(ACPI_HOTK_NAME); -MODULE_LICENSE("GPL"); - -static uid_t asus_uid; -static gid_t asus_gid; -module_param(asus_uid, uint, 0); -MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus"); -module_param(asus_gid, uint, 0); -MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus"); - -/* For each model, all features implemented, - * those marked with R are relative to HOTK, A for absolute */ -struct model_data { - char *name; /* name of the laptop________________A */ - char *mt_mled; /* method to handle mled_____________R */ - char *mled_status; /* node to handle mled reading_______A */ - char *mt_wled; /* method to handle wled_____________R */ - char *wled_status; /* node to handle wled reading_______A */ - char *mt_tled; /* method to handle tled_____________R */ - char *tled_status; /* node to handle tled reading_______A */ - char *mt_ledd; /* method to handle LED display______R */ - char *mt_bt_switch; /* method to switch Bluetooth on/off_R */ - char *bt_status; /* no model currently supports this__? */ - char *mt_lcd_switch; /* method to turn LCD on/off_________A */ - char *lcd_status; /* node to read LCD panel state______A */ - char *brightness_up; /* method to set brightness up_______A */ - char *brightness_down; /* method to set brightness down ____A */ - char *brightness_set; /* method to set absolute brightness_R */ - char *brightness_get; /* method to get absolute brightness_R */ - char *brightness_status;/* node to get brightness____________A */ - char *display_set; /* method to set video output________R */ - char *display_get; /* method to get video output________R */ -}; - -/* - * This is the main structure, we can use it to store anything interesting - * about the hotk device - */ -struct asus_hotk { - struct acpi_device *device; /* the device we are in */ - acpi_handle handle; /* the handle of the hotk device */ - char status; /* status of the hotk, for LEDs */ - u32 ledd_status; /* status of the LED display */ - struct model_data *methods; /* methods available on the laptop */ - u8 brightness; /* brightness level */ - enum { - A1x = 0, /* A1340D, A1300F */ - A2x, /* A2500H */ - A4G, /* A4700G */ - D1x, /* D1 */ - L2D, /* L2000D */ - L3C, /* L3800C */ - L3D, /* L3400D */ - L3H, /* L3H, L2000E, L5D */ - L4R, /* L4500R */ - L5x, /* L5800C */ - L8L, /* L8400L */ - M1A, /* M1300A */ - M2E, /* M2400E, L4400L */ - M6N, /* M6800N, W3400N */ - M6R, /* M6700R, A3000G */ - P30, /* Samsung P30 */ - S1x, /* S1300A, but also L1400B and M2400A (L84F) */ - S2x, /* S200 (J1 reported), Victor MP-XP7210 */ - W1N, /* W1000N */ - W5A, /* W5A */ - W3V, /* W3030V */ - xxN, /* M2400N, M3700N, M5200N, M6800N, - S1300N, S5200N*/ - A4S, /* Z81sp */ - F3Sa, /* (Centrino) */ - END_MODEL - } model; /* Models currently supported */ - u16 event_count[128]; /* Count for each event TODO make this better */ -}; - -/* Here we go */ -#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0." -#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0." -#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0." -#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0." -#define S1x_PREFIX "\\_SB.PCI0.PX40." -#define S2x_PREFIX A1x_PREFIX -#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0." - -static struct model_data model_conf[END_MODEL] = { - /* - * TODO I have seen a SWBX and AIBX method on some models, like L1400B, - * it seems to be a kind of switch, but what for ? - */ - - { - .name = "A1x", - .mt_mled = "MLED", - .mled_status = "\\MAIL", - .mt_lcd_switch = A1x_PREFIX "_Q10", - .lcd_status = "\\BKLI", - .brightness_up = A1x_PREFIX "_Q0E", - .brightness_down = A1x_PREFIX "_Q0F"}, - - { - .name = "A2x", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\SG66", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\BAOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "A4G", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_lcd_switch = xxN_PREFIX "_Q10", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "D1x", - .mt_mled = "MLED", - .mt_lcd_switch = "\\Q0D", - .lcd_status = "\\GP11", - .brightness_up = "\\Q0C", - .brightness_down = "\\Q0B", - .brightness_status = "\\BLVL", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L2D", - .mt_mled = "MLED", - .mled_status = "\\SGP6", - .mt_wled = "WLED", - .wled_status = "\\RCP3", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\SGP0", - .brightness_up = "\\Q0E", - .brightness_down = "\\Q0F", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L3C", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = L3C_PREFIX "_Q10", - .lcd_status = "\\GL32", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"}, - - { - .name = "L3D", - .mt_mled = "MLED", - .mled_status = "\\MALD", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\BKLG", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L3H", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "EHK", - .lcd_status = "\\_SB.PCI0.PM.PBC", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L4R", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\_SB.PCI0.SBRG.SG13", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.PCI0.SBSM.SEO4", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, - - { - .name = "L5x", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_tled = "TLED", - .mt_lcd_switch = "\\Q0D", - .lcd_status = "\\BAOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L8L" -/* No features, but at least support the hotkeys */ - }, - - { - .name = "M1A", - .mt_mled = "MLED", - .mt_lcd_switch = M1A_PREFIX "Q10", - .lcd_status = "\\PNOF", - .brightness_up = M1A_PREFIX "Q0E", - .brightness_down = M1A_PREFIX "Q0F", - .brightness_status = "\\BRIT", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "M2E", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\GP06", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "M6N", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\_SB.PCI0.SBRG.SG13", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\SSTE"}, - - { - .name = "M6R", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.PCI0.SBSM.SEO4", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, - - { - .name = "P30", - .mt_wled = "WLED", - .mt_lcd_switch = P30_PREFIX "_Q0E", - .lcd_status = "\\BKLT", - .brightness_up = P30_PREFIX "_Q68", - .brightness_down = P30_PREFIX "_Q69", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\DNXT"}, - - { - .name = "S1x", - .mt_mled = "MLED", - .mled_status = "\\EMLE", - .mt_wled = "WLED", - .mt_lcd_switch = S1x_PREFIX "Q10", - .lcd_status = "\\PNOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV"}, - - { - .name = "S2x", - .mt_mled = "MLED", - .mled_status = "\\MAIL", - .mt_lcd_switch = S2x_PREFIX "_Q10", - .lcd_status = "\\BKLI", - .brightness_up = S2x_PREFIX "_Q0B", - .brightness_down = S2x_PREFIX "_Q0A"}, - - { - .name = "W1N", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_ledd = "SLCM", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "W5A", - .mt_bt_switch = "BLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "W3V", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "xxN", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "A4S", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .mt_bt_switch = "BLED", - .mt_wled = "WLED" - }, - - { - .name = "F3Sa", - .mt_bt_switch = "BLED", - .mt_wled = "WLED", - .mt_mled = "MLED", - .brightness_get = "GPLV", - .brightness_set = "SPLV", - .mt_lcd_switch = "\\_SB.PCI0.SBRG.EC0._Q10", - .lcd_status = "\\_SB.PCI0.SBRG.EC0.RPIN", - .display_get = "\\ADVG", - .display_set = "SDSP", - }, - -}; - -/* procdir we use */ -static struct proc_dir_entry *asus_proc_dir; - -static struct backlight_device *asus_backlight_device; - -/* - * This header is made available to allow proper configuration given model, - * revision number , ... this info cannot go in struct asus_hotk because it is - * available before the hotk - */ -static struct acpi_table_header *asus_info; - -/* The actual device the driver binds to */ -static struct asus_hotk *hotk; - -/* - * The hotkey driver and autoloading declaration - */ -static int asus_hotk_add(struct acpi_device *device); -static int asus_hotk_remove(struct acpi_device *device, int type); -static const struct acpi_device_id asus_device_ids[] = { - {"ATK0100", 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, asus_device_ids); - -static struct acpi_driver asus_hotk_driver = { - .name = "asus_acpi", - .class = ACPI_HOTK_CLASS, - .ids = asus_device_ids, - .ops = { - .add = asus_hotk_add, - .remove = asus_hotk_remove, - }, -}; - -/* - * This function evaluates an ACPI method, given an int as parameter, the - * method is searched within the scope of the handle, can be NULL. The output - * of the method is written is output, which can also be NULL - * - * returns 1 if write is successful, 0 else. - */ -static int write_acpi_int(acpi_handle handle, const char *method, int val, - struct acpi_buffer *output) -{ - struct acpi_object_list params; /* list of input parameters (int) */ - union acpi_object in_obj; /* the only param we use */ - acpi_status status; - - params.count = 1; - params.pointer = &in_obj; - in_obj.type = ACPI_TYPE_INTEGER; - in_obj.integer.value = val; - - status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); - return (status == AE_OK); -} - -static int read_acpi_int(acpi_handle handle, const char *method, int *val) -{ - struct acpi_buffer output; - union acpi_object out_obj; - acpi_status status; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = acpi_evaluate_object(handle, (char *)method, NULL, &output); - *val = out_obj.integer.value; - return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); -} - -/* - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ -static int -proc_read_info(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - int len = 0; - int temp; - char buf[16]; /* enough for all info */ - /* - * We use the easy way, we don't care of off and count, - * so we don't set eof to 1 - */ - - len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); - len += sprintf(page + len, "Model reference : %s\n", - hotk->methods->name); - /* - * The SFUN method probably allows the original driver to get the list - * of features supported by a given model. For now, 0x0100 or 0x0800 - * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. - * The significance of others is yet to be found. - */ - if (read_acpi_int(hotk->handle, "SFUN", &temp)) - len += - sprintf(page + len, "SFUN value : 0x%04x\n", temp); - /* - * Another value for userspace: the ASYM method returns 0x02 for - * battery low and 0x04 for battery critical, its readings tend to be - * more accurate than those provided by _BST. - * Note: since not all the laptops provide this method, errors are - * silently ignored. - */ - if (read_acpi_int(hotk->handle, "ASYM", &temp)) - len += - sprintf(page + len, "ASYM value : 0x%04x\n", temp); - if (asus_info) { - snprintf(buf, 16, "%d", asus_info->length); - len += sprintf(page + len, "DSDT length : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->checksum); - len += sprintf(page + len, "DSDT checksum : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->revision); - len += sprintf(page + len, "DSDT revision : %s\n", buf); - snprintf(buf, 7, "%s", asus_info->oem_id); - len += sprintf(page + len, "OEM id : %s\n", buf); - snprintf(buf, 9, "%s", asus_info->oem_table_id); - len += sprintf(page + len, "OEM table id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->oem_revision); - len += sprintf(page + len, "OEM revision : 0x%s\n", buf); - snprintf(buf, 5, "%s", asus_info->asl_compiler_id); - len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); - len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); - } - - return len; -} - -/* - * /proc handlers - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ - -/* Generic LED functions */ -static int read_led(const char *ledname, int ledmask) -{ - if (ledname) { - int led_status; - - if (read_acpi_int(NULL, ledname, &led_status)) - return led_status; - else - printk(KERN_WARNING "Asus ACPI: Error reading LED " - "status\n"); - } - return (hotk->status & ledmask) ? 1 : 0; -} - -static int parse_arg(const char __user *buf, unsigned long count, int *val) -{ - char s[32]; - if (!count) - return 0; - if (count > 31) - return -EINVAL; - if (copy_from_user(s, buf, count)) - return -EFAULT; - s[count] = 0; - if (sscanf(s, "%i", val) != 1) - return -EINVAL; - return count; -} - -/* FIXME: kill extraneous args so it can be called independently */ -static int -write_led(const char __user *buffer, unsigned long count, - char *ledname, int ledmask, int invert) -{ - int rv, value; - int led_out = 0; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - led_out = value ? 1 : 0; - - hotk->status = - (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask); - - if (invert) /* invert target value */ - led_out = !led_out; - - if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) - printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n", - ledname); - - return rv; -} - -/* - * Proc handlers for MLED - */ -static int -proc_read_mled(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", - read_led(hotk->methods->mled_status, MLED_ON)); -} - -static int -proc_write_mled(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); -} - -/* - * Proc handlers for LED display - */ -static int -proc_read_ledd(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "0x%08x\n", hotk->ledd_status); -} - -static int -proc_write_ledd(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) { - if (!write_acpi_int - (hotk->handle, hotk->methods->mt_ledd, value, NULL)) - printk(KERN_WARNING - "Asus ACPI: LED display write failed\n"); - else - hotk->ledd_status = (u32) value; - } - return rv; -} - -/* - * Proc handlers for WLED - */ -static int -proc_read_wled(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", - read_led(hotk->methods->wled_status, WLED_ON)); -} - -static int -proc_write_wled(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); -} - -/* - * Proc handlers for Bluetooth - */ -static int -proc_read_bluetooth(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); -} - -static int -proc_write_bluetooth(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - /* Note: mt_bt_switch controls both internal Bluetooth adapter's - presence and its LED */ - return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0); -} - -/* - * Proc handlers for TLED - */ -static int -proc_read_tled(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", - read_led(hotk->methods->tled_status, TLED_ON)); -} - -static int -proc_write_tled(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); -} - -static int get_lcd_state(void) -{ - int lcd = 0; - - if (hotk->model == L3H) { - /* L3H and the like have to be handled differently */ - acpi_status status = 0; - struct acpi_object_list input; - union acpi_object mt_params[2]; - struct acpi_buffer output; - union acpi_object out_obj; - - input.count = 2; - input.pointer = mt_params; - /* Note: the following values are partly guessed up, but - otherwise they seem to work */ - mt_params[0].type = ACPI_TYPE_INTEGER; - mt_params[0].integer.value = 0x02; - mt_params[1].type = ACPI_TYPE_INTEGER; - mt_params[1].integer.value = 0x02; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = - acpi_evaluate_object(NULL, hotk->methods->lcd_status, - &input, &output); - if (status != AE_OK) - return -1; - if (out_obj.type == ACPI_TYPE_INTEGER) - /* That's what the AML code does */ - lcd = out_obj.integer.value >> 8; - } else if (hotk->model == F3Sa) { - unsigned long long tmp; - union acpi_object param; - struct acpi_object_list input; - acpi_status status; - - /* Read pin 11 */ - param.type = ACPI_TYPE_INTEGER; - param.integer.value = 0x11; - input.count = 1; - input.pointer = ¶m; - - status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status, - &input, &tmp); - if (status != AE_OK) - return -1; - - lcd = tmp; - } else { - /* We don't have to check anything if we are here */ - if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) - printk(KERN_WARNING - "Asus ACPI: Error reading LCD status\n"); - - if (hotk->model == L2D) - lcd = ~lcd; - } - - return (lcd & 1); -} - -static int set_lcd_state(int value) -{ - int lcd = 0; - acpi_status status = 0; - - lcd = value ? 1 : 0; - if (lcd != get_lcd_state()) { - /* switch */ - if (hotk->model != L3H) { - status = - acpi_evaluate_object(NULL, - hotk->methods->mt_lcd_switch, - NULL, NULL); - } else { - /* L3H and the like must be handled differently */ - if (!write_acpi_int - (hotk->handle, hotk->methods->mt_lcd_switch, 0x07, - NULL)) - status = AE_ERROR; - /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress, - the exact behaviour is simulated here */ - } - if (ACPI_FAILURE(status)) - printk(KERN_WARNING "Asus ACPI: Error switching LCD\n"); - } - return 0; - -} - -static int -proc_read_lcd(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", get_lcd_state()); -} - -static int -proc_write_lcd(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - set_lcd_state(value); - return rv; -} - -static int read_brightness(struct backlight_device *bd) -{ - int value; - - if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */ - if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get, - &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading brightness\n"); - } else if (hotk->methods->brightness_status) { /* For D1 for example */ - if (!read_acpi_int(NULL, hotk->methods->brightness_status, - &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading brightness\n"); - } else /* No GPLV method */ - value = hotk->brightness; - return value; -} - -/* - * Change the brightness level - */ -static int set_brightness(int value) -{ - acpi_status status = 0; - int ret = 0; - - /* SPLV laptop */ - if (hotk->methods->brightness_set) { - if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set, - value, NULL)) - printk(KERN_WARNING - "Asus ACPI: Error changing brightness\n"); - ret = -EIO; - goto out; - } - - /* No SPLV method if we are here, act as appropriate */ - value -= read_brightness(NULL); - while (value != 0) { - status = acpi_evaluate_object(NULL, (value > 0) ? - hotk->methods->brightness_up : - hotk->methods->brightness_down, - NULL, NULL); - (value > 0) ? value-- : value++; - if (ACPI_FAILURE(status)) - printk(KERN_WARNING - "Asus ACPI: Error changing brightness\n"); - ret = -EIO; - } -out: - return ret; -} - -static int set_brightness_status(struct backlight_device *bd) -{ - return set_brightness(bd->props.brightness); -} - -static int -proc_read_brn(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", read_brightness(NULL)); -} - -static int -proc_write_brn(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) { - value = (0 < value) ? ((15 < value) ? 15 : value) : 0; - /* 0 <= value <= 15 */ - set_brightness(value); - } - return rv; -} - -static void set_display(int value) -{ - /* no sanity check needed for now */ - if (!write_acpi_int(hotk->handle, hotk->methods->display_set, - value, NULL)) - printk(KERN_WARNING "Asus ACPI: Error setting display\n"); - return; -} - -/* - * Now, *this* one could be more user-friendly, but so far, no-one has - * complained. The significance of bits is the same as in proc_write_disp() - */ -static int -proc_read_disp(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - int value = 0; - - if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading display status\n"); - value &= 0x07; /* needed for some models, shouldn't hurt others */ - return sprintf(page, "%d\n", value); -} - -/* - * Experimental support for display switching. As of now: 1 should activate - * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination - * (bitwise) of these will suffice. I never actually tested 3 displays hooked - * up simultaneously, so be warned. See the acpi4asus README for more info. - */ -static int -proc_write_disp(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - set_display(value); - return rv; -} - -typedef int (proc_readfunc) (char *page, char **start, off_t off, int count, - int *eof, void *data); -typedef int (proc_writefunc) (struct file *file, const char __user *buffer, - unsigned long count, void *data); - -static int -asus_proc_add(char *name, proc_writefunc *writefunc, - proc_readfunc *readfunc, mode_t mode, - struct acpi_device *device) -{ - struct proc_dir_entry *proc = - create_proc_entry(name, mode, acpi_device_dir(device)); - if (!proc) { - printk(KERN_WARNING " Unable to create %s fs entry\n", name); - return -1; - } - proc->write_proc = writefunc; - proc->read_proc = readfunc; - proc->data = acpi_driver_data(device); - proc->owner = THIS_MODULE; - proc->uid = asus_uid; - proc->gid = asus_gid; - return 0; -} - -static int asus_hotk_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *proc; - mode_t mode; - - /* - * If parameter uid or gid is not changed, keep the default setting for - * our proc entries (-rw-rw-rw-) else, it means we care about security, - * and then set to -rw-rw---- - */ - - if ((asus_uid == 0) && (asus_gid == 0)) { - mode = S_IFREG | S_IRUGO | S_IWUGO; - } else { - mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP; - printk(KERN_WARNING " asus_uid and asus_gid parameters are " - "deprecated, use chown and chmod instead!\n"); - } - - acpi_device_dir(device) = asus_proc_dir; - if (!acpi_device_dir(device)) - return -ENODEV; - - proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device)); - if (proc) { - proc->read_proc = proc_read_info; - proc->data = acpi_driver_data(device); - proc->owner = THIS_MODULE; - proc->uid = asus_uid; - proc->gid = asus_gid; - } else { - printk(KERN_WARNING " Unable to create " PROC_INFO - " fs entry\n"); - } - - if (hotk->methods->mt_wled) { - asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled, - mode, device); - } - - if (hotk->methods->mt_ledd) { - asus_proc_add(PROC_LEDD, &proc_write_ledd, &proc_read_ledd, - mode, device); - } - - if (hotk->methods->mt_mled) { - asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled, - mode, device); - } - - if (hotk->methods->mt_tled) { - asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled, - mode, device); - } - - if (hotk->methods->mt_bt_switch) { - asus_proc_add(PROC_BT, &proc_write_bluetooth, - &proc_read_bluetooth, mode, device); - } - - /* - * We need both read node and write method as LCD switch is also - * accessible from the keyboard - */ - if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { - asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode, - device); - } - - if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || - (hotk->methods->brightness_get && hotk->methods->brightness_set)) { - asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode, - device); - } - - if (hotk->methods->display_set) { - asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp, - mode, device); - } - - return 0; -} - -static int asus_hotk_remove_fs(struct acpi_device *device) -{ - if (acpi_device_dir(device)) { - remove_proc_entry(PROC_INFO, acpi_device_dir(device)); - if (hotk->methods->mt_wled) - remove_proc_entry(PROC_WLED, acpi_device_dir(device)); - if (hotk->methods->mt_mled) - remove_proc_entry(PROC_MLED, acpi_device_dir(device)); - if (hotk->methods->mt_tled) - remove_proc_entry(PROC_TLED, acpi_device_dir(device)); - if (hotk->methods->mt_ledd) - remove_proc_entry(PROC_LEDD, acpi_device_dir(device)); - if (hotk->methods->mt_bt_switch) - remove_proc_entry(PROC_BT, acpi_device_dir(device)); - if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) - remove_proc_entry(PROC_LCD, acpi_device_dir(device)); - if ((hotk->methods->brightness_up - && hotk->methods->brightness_down) - || (hotk->methods->brightness_get - && hotk->methods->brightness_set)) - remove_proc_entry(PROC_BRN, acpi_device_dir(device)); - if (hotk->methods->display_set) - remove_proc_entry(PROC_DISP, acpi_device_dir(device)); - } - return 0; -} - -static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) -{ - /* TODO Find a better way to handle events count. */ - if (!hotk) - return; - - if ((event & ~((u32) BR_UP)) < 16) - hotk->brightness = (event & ~((u32) BR_UP)); - else if ((event & ~((u32) BR_DOWN)) < 16) - hotk->brightness = (event & ~((u32) BR_DOWN)); - - acpi_bus_generate_proc_event(hotk->device, event, - hotk->event_count[event % 128]++); - - return; -} - -/* - * Match the model string to the list of supported models. Return END_MODEL if - * no match or model is NULL. - */ -static int asus_model_match(char *model) -{ - if (model == NULL) - return END_MODEL; - - if (strncmp(model, "L3D", 3) == 0) - return L3D; - else if (strncmp(model, "L2E", 3) == 0 || - strncmp(model, "L3H", 3) == 0 || strncmp(model, "L5D", 3) == 0) - return L3H; - else if (strncmp(model, "L3", 2) == 0 || strncmp(model, "L2B", 3) == 0) - return L3C; - else if (strncmp(model, "L8L", 3) == 0) - return L8L; - else if (strncmp(model, "L4R", 3) == 0) - return L4R; - else if (strncmp(model, "M6N", 3) == 0 || strncmp(model, "W3N", 3) == 0) - return M6N; - else if (strncmp(model, "M6R", 3) == 0 || strncmp(model, "A3G", 3) == 0) - return M6R; - else if (strncmp(model, "M2N", 3) == 0 || - strncmp(model, "M3N", 3) == 0 || - strncmp(model, "M5N", 3) == 0 || - strncmp(model, "M6N", 3) == 0 || - strncmp(model, "S1N", 3) == 0 || - strncmp(model, "S5N", 3) == 0 || strncmp(model, "W1N", 3) == 0) - return xxN; - else if (strncmp(model, "M1", 2) == 0) - return M1A; - else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0) - return M2E; - else if (strncmp(model, "L2", 2) == 0) - return L2D; - else if (strncmp(model, "L8", 2) == 0) - return S1x; - else if (strncmp(model, "D1", 2) == 0) - return D1x; - else if (strncmp(model, "A1", 2) == 0) - return A1x; - else if (strncmp(model, "A2", 2) == 0) - return A2x; - else if (strncmp(model, "J1", 2) == 0) - return S2x; - else if (strncmp(model, "L5", 2) == 0) - return L5x; - else if (strncmp(model, "A4G", 3) == 0) - return A4G; - else if (strncmp(model, "W1N", 3) == 0) - return W1N; - else if (strncmp(model, "W3V", 3) == 0) - return W3V; - else if (strncmp(model, "W5A", 3) == 0) - return W5A; - else if (strncmp(model, "A4S", 3) == 0) - return A4S; - else if (strncmp(model, "F3Sa", 4) == 0) - return F3Sa; - else - return END_MODEL; -} - -/* - * This function is used to initialize the hotk with right values. In this - * method, we can make all the detection we want, and modify the hotk struct - */ -static int asus_hotk_get_info(void) -{ - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *model = NULL; - int bsts_result; - char *string = NULL; - acpi_status status; - - /* - * Get DSDT headers early enough to allow for differentiating between - * models, but late enough to allow acpi_bus_register_driver() to fail - * before doing anything ACPI-specific. Should we encounter a machine, - * which needs special handling (i.e. its hotkey device has a different - * HID), this bit will be moved. A global variable asus_info contains - * the DSDT header. - */ - status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Couldn't get the DSDT table header\n"); - - /* We have to write 0 on init this far for all ASUS models */ - if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { - printk(KERN_ERR " Hotkey initialization failed\n"); - return -ENODEV; - } - - /* This needs to be called for some laptops to init properly */ - if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result)) - printk(KERN_WARNING " Error calling BSTS\n"); - else if (bsts_result) - printk(KERN_NOTICE " BSTS called, 0x%02x returned\n", - bsts_result); - - /* - * Try to match the object returned by INIT to the specific model. - * Handle every possible object (or the lack of thereof) the DSDT - * writers might throw at us. When in trouble, we pass NULL to - * asus_model_match() and try something completely different. - */ - if (buffer.pointer) { - model = buffer.pointer; - switch (model->type) { - case ACPI_TYPE_STRING: - string = model->string.pointer; - break; - case ACPI_TYPE_BUFFER: - string = model->buffer.pointer; - break; - default: - kfree(model); - model = NULL; - break; - } - } - hotk->model = asus_model_match(string); - if (hotk->model == END_MODEL) { /* match failed */ - if (asus_info && - strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) { - hotk->model = P30; - printk(KERN_NOTICE - " Samsung P30 detected, supported\n"); - } else { - hotk->model = M2E; - printk(KERN_NOTICE " unsupported model %s, trying " - "default values\n", string); - printk(KERN_NOTICE - " send /proc/acpi/dsdt to the developers\n"); - kfree(model); - return -ENODEV; - } - hotk->methods = &model_conf[hotk->model]; - return AE_OK; - } - hotk->methods = &model_conf[hotk->model]; - printk(KERN_NOTICE " %s model detected, supported\n", string); - - /* Sort of per-model blacklist */ - if (strncmp(string, "L2B", 3) == 0) - hotk->methods->lcd_status = NULL; - /* L2B is similar enough to L3C to use its settings, with this only - exception */ - else if (strncmp(string, "A3G", 3) == 0) - hotk->methods->lcd_status = "\\BLFG"; - /* A3G is like M6R */ - else if (strncmp(string, "S5N", 3) == 0 || - strncmp(string, "M5N", 3) == 0 || - strncmp(string, "W3N", 3) == 0) - hotk->methods->mt_mled = NULL; - /* S5N, M5N and W3N have no MLED */ - else if (strncmp(string, "L5D", 3) == 0) - hotk->methods->mt_wled = NULL; - /* L5D's WLED is not controlled by ACPI */ - else if (strncmp(string, "M2N", 3) == 0 || - strncmp(string, "W3V", 3) == 0 || - strncmp(string, "S1N", 3) == 0) - hotk->methods->mt_wled = "WLED"; - /* M2N, S1N and W3V have a usable WLED */ - else if (asus_info) { - if (strncmp(asus_info->oem_table_id, "L1", 2) == 0) - hotk->methods->mled_status = NULL; - /* S1300A reports L84F, but L1400B too, account for that */ - } - - kfree(model); - - return AE_OK; -} - -static int asus_hotk_check(void) -{ - int result = 0; - - result = acpi_bus_get_status(hotk->device); - if (result) - return result; - - if (hotk->device->status.present) { - result = asus_hotk_get_info(); - } else { - printk(KERN_ERR " Hotkey device not present, aborting\n"); - return -EINVAL; - } - - return result; -} - -static int asus_hotk_found; - -static int asus_hotk_add(struct acpi_device *device) -{ - acpi_status status = AE_OK; - int result; - - if (!device) - return -EINVAL; - - printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n", - ASUS_ACPI_VERSION); - - hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL); - if (!hotk) - return -ENOMEM; - - hotk->handle = device->handle; - strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_HOTK_CLASS); - device->driver_data = hotk; - hotk->device = device; - - result = asus_hotk_check(); - if (result) - goto end; - - result = asus_hotk_add_fs(device); - if (result) - goto end; - - /* - * We install the handler, it will receive the hotk in parameter, so, we - * could add other data to the hotk struct - */ - status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, - asus_hotk_notify, hotk); - if (ACPI_FAILURE(status)) - printk(KERN_ERR " Error installing notify handler\n"); - - /* For laptops without GPLV: init the hotk->brightness value */ - if ((!hotk->methods->brightness_get) - && (!hotk->methods->brightness_status) - && (hotk->methods->brightness_up && hotk->methods->brightness_down)) { - status = - acpi_evaluate_object(NULL, hotk->methods->brightness_down, - NULL, NULL); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Error changing brightness\n"); - else { - status = - acpi_evaluate_object(NULL, - hotk->methods->brightness_up, - NULL, NULL); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Strange, error changing" - " brightness\n"); - } - } - - asus_hotk_found = 1; - - /* LED display is off by default */ - hotk->ledd_status = 0xFFF; - -end: - if (result) - kfree(hotk); - - return result; -} - -static int asus_hotk_remove(struct acpi_device *device, int type) -{ - acpi_status status = 0; - - if (!device || !acpi_driver_data(device)) - return -EINVAL; - - status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, - asus_hotk_notify); - if (ACPI_FAILURE(status)) - printk(KERN_ERR "Asus ACPI: Error removing notify handler\n"); - - asus_hotk_remove_fs(device); - - kfree(hotk); - - return 0; -} - -static struct backlight_ops asus_backlight_data = { - .get_brightness = read_brightness, - .update_status = set_brightness_status, -}; - -static void asus_acpi_exit(void) -{ - if (asus_backlight_device) - backlight_device_unregister(asus_backlight_device); - - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - - return; -} - -static int __init asus_acpi_init(void) -{ - int result; - - if (acpi_disabled) - return -ENODEV; - - asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); - if (!asus_proc_dir) { - printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n"); - return -ENODEV; - } - asus_proc_dir->owner = THIS_MODULE; - - result = acpi_bus_register_driver(&asus_hotk_driver); - if (result < 0) { - remove_proc_entry(PROC_ASUS, acpi_root_dir); - return result; - } - - /* - * This is a bit of a kludge. We only want this module loaded - * for ASUS systems, but there's currently no way to probe the - * ACPI namespace for ASUS HIDs. So we just return failure if - * we didn't find one, which will cause the module to be - * unloaded. - */ - if (!asus_hotk_found) { - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - return -ENODEV; - } - - asus_backlight_device = backlight_device_register("asus", NULL, NULL, - &asus_backlight_data); - if (IS_ERR(asus_backlight_device)) { - printk(KERN_ERR "Could not register asus backlight device\n"); - asus_backlight_device = NULL; - asus_acpi_exit(); - return -ENODEV; - } - asus_backlight_device->props.max_brightness = 15; - - return 0; -} - -module_init(asus_acpi_init); -module_exit(asus_acpi_exit); diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c deleted file mode 100644 index 40e60fc..0000000 --- a/drivers/acpi/toshiba_acpi.c +++ /dev/null @@ -1,863 +0,0 @@ -/* - * toshiba_acpi.c - Toshiba Laptop ACPI Extras - * - * - * Copyright (C) 2002-2004 John Belmonte - * Copyright (C) 2008 Philip Langdale - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * The devolpment page for this driver is located at - * http://memebeam.org/toys/ToshibaAcpiDriver. - * - * Credits: - * Jonathan A. Buzzard - Toshiba HCI info, and critical tips on reverse - * engineering the Windows drivers - * Yasushi Nagato - changes for linux kernel 2.4 -> 2.5 - * Rob Miller - TV out and hotkeys help - * - * - * TODO - * - */ - -#define TOSHIBA_ACPI_VERSION "0.19" -#define PROC_INTERFACE_VERSION 1 - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/proc_fs.h> -#include <linux/backlight.h> -#include <linux/platform_device.h> -#include <linux/rfkill.h> -#include <linux/input-polldev.h> - -#include <asm/uaccess.h> - -#include <acpi/acpi_drivers.h> - -MODULE_AUTHOR("John Belmonte"); -MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver"); -MODULE_LICENSE("GPL"); - -#define MY_LOGPREFIX "toshiba_acpi: " -#define MY_ERR KERN_ERR MY_LOGPREFIX -#define MY_NOTICE KERN_NOTICE MY_LOGPREFIX -#define MY_INFO KERN_INFO MY_LOGPREFIX - -/* Toshiba ACPI method paths */ -#define METHOD_LCD_BRIGHTNESS "\\_SB_.PCI0.VGA_.LCD_._BCM" -#define METHOD_HCI_1 "\\_SB_.VALD.GHCI" -#define METHOD_HCI_2 "\\_SB_.VALZ.GHCI" -#define METHOD_VIDEO_OUT "\\_SB_.VALX.DSSX" - -/* Toshiba HCI interface definitions - * - * HCI is Toshiba's "Hardware Control Interface" which is supposed to - * be uniform across all their models. Ideally we would just call - * dedicated ACPI methods instead of using this primitive interface. - * However the ACPI methods seem to be incomplete in some areas (for - * example they allow setting, but not reading, the LCD brightness value), - * so this is still useful. - */ - -#define HCI_WORDS 6 - -/* operations */ -#define HCI_SET 0xff00 -#define HCI_GET 0xfe00 - -/* return codes */ -#define HCI_SUCCESS 0x0000 -#define HCI_FAILURE 0x1000 -#define HCI_NOT_SUPPORTED 0x8000 -#define HCI_EMPTY 0x8c00 - -/* registers */ -#define HCI_FAN 0x0004 -#define HCI_SYSTEM_EVENT 0x0016 -#define HCI_VIDEO_OUT 0x001c -#define HCI_HOTKEY_EVENT 0x001e -#define HCI_LCD_BRIGHTNESS 0x002a -#define HCI_WIRELESS 0x0056 - -/* field definitions */ -#define HCI_LCD_BRIGHTNESS_BITS 3 -#define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS) -#define HCI_LCD_BRIGHTNESS_LEVELS (1 << HCI_LCD_BRIGHTNESS_BITS) -#define HCI_VIDEO_OUT_LCD 0x1 -#define HCI_VIDEO_OUT_CRT 0x2 -#define HCI_VIDEO_OUT_TV 0x4 -#define HCI_WIRELESS_KILL_SWITCH 0x01 -#define HCI_WIRELESS_BT_PRESENT 0x0f -#define HCI_WIRELESS_BT_ATTACH 0x40 -#define HCI_WIRELESS_BT_POWER 0x80 - -static const struct acpi_device_id toshiba_device_ids[] = { - {"TOS6200", 0}, - {"TOS6208", 0}, - {"TOS1900", 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, toshiba_device_ids); - -/* utility - */ - -static __inline__ void _set_bit(u32 * word, u32 mask, int value) -{ - *word = (*word & ~mask) | (mask * value); -} - -/* acpi interface wrappers - */ - -static int is_valid_acpi_path(const char *methodName) -{ - acpi_handle handle; - acpi_status status; - - status = acpi_get_handle(NULL, (char *)methodName, &handle); - return !ACPI_FAILURE(status); -} - -static int write_acpi_int(const char *methodName, int val) -{ - struct acpi_object_list params; - union acpi_object in_objs[1]; - acpi_status status; - - params.count = ARRAY_SIZE(in_objs); - params.pointer = in_objs; - in_objs[0].type = ACPI_TYPE_INTEGER; - in_objs[0].integer.value = val; - - status = acpi_evaluate_object(NULL, (char *)methodName, ¶ms, NULL); - return (status == AE_OK); -} - -#if 0 -static int read_acpi_int(const char *methodName, int *pVal) -{ - struct acpi_buffer results; - union acpi_object out_objs[1]; - acpi_status status; - - results.length = sizeof(out_objs); - results.pointer = out_objs; - - status = acpi_evaluate_object(0, (char *)methodName, 0, &results); - *pVal = out_objs[0].integer.value; - - return (status == AE_OK) && (out_objs[0].type == ACPI_TYPE_INTEGER); -} -#endif - -static const char *method_hci /*= 0*/ ; - -/* Perform a raw HCI call. Here we don't care about input or output buffer - * format. - */ -static acpi_status hci_raw(const u32 in[HCI_WORDS], u32 out[HCI_WORDS]) -{ - struct acpi_object_list params; - union acpi_object in_objs[HCI_WORDS]; - struct acpi_buffer results; - union acpi_object out_objs[HCI_WORDS + 1]; - acpi_status status; - int i; - - params.count = HCI_WORDS; - params.pointer = in_objs; - for (i = 0; i < HCI_WORDS; ++i) { - in_objs[i].type = ACPI_TYPE_INTEGER; - in_objs[i].integer.value = in[i]; - } - - results.length = sizeof(out_objs); - results.pointer = out_objs; - - status = acpi_evaluate_object(NULL, (char *)method_hci, ¶ms, - &results); - if ((status == AE_OK) && (out_objs->package.count <= HCI_WORDS)) { - for (i = 0; i < out_objs->package.count; ++i) { - out[i] = out_objs->package.elements[i].integer.value; - } - } - - return status; -} - -/* common hci tasks (get or set one or two value) - * - * In addition to the ACPI status, the HCI system returns a result which - * may be useful (such as "not supported"). - */ - -static acpi_status hci_write1(u32 reg, u32 in1, u32 * result) -{ - u32 in[HCI_WORDS] = { HCI_SET, reg, in1, 0, 0, 0 }; - u32 out[HCI_WORDS]; - acpi_status status = hci_raw(in, out); - *result = (status == AE_OK) ? out[0] : HCI_FAILURE; - return status; -} - -static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result) -{ - u32 in[HCI_WORDS] = { HCI_GET, reg, 0, 0, 0, 0 }; - u32 out[HCI_WORDS]; - acpi_status status = hci_raw(in, out); - *out1 = out[2]; - *result = (status == AE_OK) ? out[0] : HCI_FAILURE; - return status; -} - -static acpi_status hci_write2(u32 reg, u32 in1, u32 in2, u32 *result) -{ - u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 }; - u32 out[HCI_WORDS]; - acpi_status status = hci_raw(in, out); - *result = (status == AE_OK) ? out[0] : HCI_FAILURE; - return status; -} - -static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result) -{ - u32 in[HCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 }; - u32 out[HCI_WORDS]; - acpi_status status = hci_raw(in, out); - *out1 = out[2]; - *out2 = out[3]; - *result = (status == AE_OK) ? out[0] : HCI_FAILURE; - return status; -} - -struct toshiba_acpi_dev { - struct platform_device *p_dev; - struct rfkill *rfk_dev; - struct input_polled_dev *poll_dev; - - const char *bt_name; - const char *rfk_name; - - bool last_rfk_state; - - struct mutex mutex; -}; - -static struct toshiba_acpi_dev toshiba_acpi = { - .bt_name = "Toshiba Bluetooth", - .rfk_name = "Toshiba RFKill Switch", - .last_rfk_state = false, -}; - -/* Bluetooth rfkill handlers */ - -static u32 hci_get_bt_present(bool *present) -{ - u32 hci_result; - u32 value, value2; - - value = 0; - value2 = 0; - hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); - if (hci_result == HCI_SUCCESS) - *present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false; - - return hci_result; -} - -static u32 hci_get_bt_on(bool *on) -{ - u32 hci_result; - u32 value, value2; - - value = 0; - value2 = 0x0001; - hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); - if (hci_result == HCI_SUCCESS) - *on = (value & HCI_WIRELESS_BT_POWER) && - (value & HCI_WIRELESS_BT_ATTACH); - - return hci_result; -} - -static u32 hci_get_radio_state(bool *radio_state) -{ - u32 hci_result; - u32 value, value2; - - value = 0; - value2 = 0x0001; - hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); - - *radio_state = value & HCI_WIRELESS_KILL_SWITCH; - return hci_result; -} - -static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state) -{ - u32 result1, result2; - u32 value; - bool radio_state; - struct toshiba_acpi_dev *dev = data; - - value = (state == RFKILL_STATE_UNBLOCKED); - - if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) - return -EFAULT; - - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (!radio_state) - return -EPERM; - break; - case RFKILL_STATE_SOFT_BLOCKED: - break; - default: - return -EINVAL; - } - - mutex_lock(&dev->mutex); - hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1); - hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2); - mutex_unlock(&dev->mutex); - - if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS) - return -EFAULT; - - return 0; -} - -static void bt_poll_rfkill(struct input_polled_dev *poll_dev) -{ - bool state_changed; - bool new_rfk_state; - bool value; - u32 hci_result; - struct toshiba_acpi_dev *dev = poll_dev->private; - - hci_result = hci_get_radio_state(&value); - if (hci_result != HCI_SUCCESS) - return; /* Can't do anything useful */ - - new_rfk_state = value; - - mutex_lock(&dev->mutex); - state_changed = new_rfk_state != dev->last_rfk_state; - dev->last_rfk_state = new_rfk_state; - mutex_unlock(&dev->mutex); - - if (unlikely(state_changed)) { - rfkill_force_state(dev->rfk_dev, - new_rfk_state ? - RFKILL_STATE_SOFT_BLOCKED : - RFKILL_STATE_HARD_BLOCKED); - input_report_switch(poll_dev->input, SW_RFKILL_ALL, - new_rfk_state); - input_sync(poll_dev->input); - } -} - -static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ; -static struct backlight_device *toshiba_backlight_device; -static int force_fan; -static int last_key_event; -static int key_event_valid; - -typedef struct _ProcItem { - const char *name; - char *(*read_func) (char *); - unsigned long (*write_func) (const char *, unsigned long); -} ProcItem; - -/* proc file handlers - */ - -static int -dispatch_read(char *page, char **start, off_t off, int count, int *eof, - ProcItem * item) -{ - char *p = page; - int len; - - if (off == 0) - p = item->read_func(p); - - /* ISSUE: I don't understand this code */ - len = (p - page); - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; -} - -static int -dispatch_write(struct file *file, const char __user * buffer, - unsigned long count, ProcItem * item) -{ - int result; - char *tmp_buffer; - - /* Arg buffer points to userspace memory, which can't be accessed - * directly. Since we're making a copy, zero-terminate the - * destination so that sscanf can be used on it safely. - */ - tmp_buffer = kmalloc(count + 1, GFP_KERNEL); - if (!tmp_buffer) - return -ENOMEM; - - if (copy_from_user(tmp_buffer, buffer, count)) { - result = -EFAULT; - } else { - tmp_buffer[count] = 0; - result = item->write_func(tmp_buffer, count); - } - kfree(tmp_buffer); - return result; -} - -static int get_lcd(struct backlight_device *bd) -{ - u32 hci_result; - u32 value; - - hci_read1(HCI_LCD_BRIGHTNESS, &value, &hci_result); - if (hci_result == HCI_SUCCESS) { - return (value >> HCI_LCD_BRIGHTNESS_SHIFT); - } else - return -EFAULT; -} - -static char *read_lcd(char *p) -{ - int value = get_lcd(NULL); - - if (value >= 0) { - p += sprintf(p, "brightness: %d\n", value); - p += sprintf(p, "brightness_levels: %d\n", - HCI_LCD_BRIGHTNESS_LEVELS); - } else { - printk(MY_ERR "Error reading LCD brightness\n"); - } - - return p; -} - -static int set_lcd(int value) -{ - u32 hci_result; - - value = value << HCI_LCD_BRIGHTNESS_SHIFT; - hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result); - if (hci_result != HCI_SUCCESS) - return -EFAULT; - - return 0; -} - -static int set_lcd_status(struct backlight_device *bd) -{ - return set_lcd(bd->props.brightness); -} - -static unsigned long write_lcd(const char *buffer, unsigned long count) -{ - int value; - int ret; - - if (sscanf(buffer, " brightness : %i", &value) == 1 && - value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) { - ret = set_lcd(value); - if (ret == 0) - ret = count; - } else { - ret = -EINVAL; - } - return ret; -} - -static char *read_video(char *p) -{ - u32 hci_result; - u32 value; - - hci_read1(HCI_VIDEO_OUT, &value, &hci_result); - if (hci_result == HCI_SUCCESS) { - int is_lcd = (value & HCI_VIDEO_OUT_LCD) ? 1 : 0; - int is_crt = (value & HCI_VIDEO_OUT_CRT) ? 1 : 0; - int is_tv = (value & HCI_VIDEO_OUT_TV) ? 1 : 0; - p += sprintf(p, "lcd_out: %d\n", is_lcd); - p += sprintf(p, "crt_out: %d\n", is_crt); - p += sprintf(p, "tv_out: %d\n", is_tv); - } else { - printk(MY_ERR "Error reading video out status\n"); - } - - return p; -} - -static unsigned long write_video(const char *buffer, unsigned long count) -{ - int value; - int remain = count; - int lcd_out = -1; - int crt_out = -1; - int tv_out = -1; - u32 hci_result; - u32 video_out; - - /* scan expression. Multiple expressions may be delimited with ; - * - * NOTE: to keep scanning simple, invalid fields are ignored - */ - while (remain) { - if (sscanf(buffer, " lcd_out : %i", &value) == 1) - lcd_out = value & 1; - else if (sscanf(buffer, " crt_out : %i", &value) == 1) - crt_out = value & 1; - else if (sscanf(buffer, " tv_out : %i", &value) == 1) - tv_out = value & 1; - /* advance to one character past the next ; */ - do { - ++buffer; - --remain; - } - while (remain && *(buffer - 1) != ';'); - } - - hci_read1(HCI_VIDEO_OUT, &video_out, &hci_result); - if (hci_result == HCI_SUCCESS) { - unsigned int new_video_out = video_out; - if (lcd_out != -1) - _set_bit(&new_video_out, HCI_VIDEO_OUT_LCD, lcd_out); - if (crt_out != -1) - _set_bit(&new_video_out, HCI_VIDEO_OUT_CRT, crt_out); - if (tv_out != -1) - _set_bit(&new_video_out, HCI_VIDEO_OUT_TV, tv_out); - /* To avoid unnecessary video disruption, only write the new - * video setting if something changed. */ - if (new_video_out != video_out) - write_acpi_int(METHOD_VIDEO_OUT, new_video_out); - } else { - return -EFAULT; - } - - return count; -} - -static char *read_fan(char *p) -{ - u32 hci_result; - u32 value; - - hci_read1(HCI_FAN, &value, &hci_result); - if (hci_result == HCI_SUCCESS) { - p += sprintf(p, "running: %d\n", (value > 0)); - p += sprintf(p, "force_on: %d\n", force_fan); - } else { - printk(MY_ERR "Error reading fan status\n"); - } - - return p; -} - -static unsigned long write_fan(const char *buffer, unsigned long count) -{ - int value; - u32 hci_result; - - if (sscanf(buffer, " force_on : %i", &value) == 1 && - value >= 0 && value <= 1) { - hci_write1(HCI_FAN, value, &hci_result); - if (hci_result != HCI_SUCCESS) - return -EFAULT; - else - force_fan = value; - } else { - return -EINVAL; - } - - return count; -} - -static char *read_keys(char *p) -{ - u32 hci_result; - u32 value; - - if (!key_event_valid) { - hci_read1(HCI_SYSTEM_EVENT, &value, &hci_result); - if (hci_result == HCI_SUCCESS) { - key_event_valid = 1; - last_key_event = value; - } else if (hci_result == HCI_EMPTY) { - /* better luck next time */ - } else if (hci_result == HCI_NOT_SUPPORTED) { - /* This is a workaround for an unresolved issue on - * some machines where system events sporadically - * become disabled. */ - hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result); - printk(MY_NOTICE "Re-enabled hotkeys\n"); - } else { - printk(MY_ERR "Error reading hotkey status\n"); - goto end; - } - } - - p += sprintf(p, "hotkey_ready: %d\n", key_event_valid); - p += sprintf(p, "hotkey: 0x%04x\n", last_key_event); - - end: - return p; -} - -static unsigned long write_keys(const char *buffer, unsigned long count) -{ - int value; - - if (sscanf(buffer, " hotkey_ready : %i", &value) == 1 && value == 0) { - key_event_valid = 0; - } else { - return -EINVAL; - } - - return count; -} - -static char *read_version(char *p) -{ - p += sprintf(p, "driver: %s\n", TOSHIBA_ACPI_VERSION); - p += sprintf(p, "proc_interface: %d\n", - PROC_INTERFACE_VERSION); - return p; -} - -/* proc and module init - */ - -#define PROC_TOSHIBA "toshiba" - -static ProcItem proc_items[] = { - {"lcd", read_lcd, write_lcd}, - {"video", read_video, write_video}, - {"fan", read_fan, write_fan}, - {"keys", read_keys, write_keys}, - {"version", read_version, NULL}, - {NULL} -}; - -static acpi_status __init add_device(void) -{ - struct proc_dir_entry *proc; - ProcItem *item; - - for (item = proc_items; item->name; ++item) { - proc = create_proc_read_entry(item->name, - S_IFREG | S_IRUGO | S_IWUSR, - toshiba_proc_dir, - (read_proc_t *) dispatch_read, - item); - if (proc) - proc->owner = THIS_MODULE; - if (proc && item->write_func) - proc->write_proc = (write_proc_t *) dispatch_write; - } - - return AE_OK; -} - -static acpi_status remove_device(void) -{ - ProcItem *item; - - for (item = proc_items; item->name; ++item) - remove_proc_entry(item->name, toshiba_proc_dir); - return AE_OK; -} - -static struct backlight_ops toshiba_backlight_data = { - .get_brightness = get_lcd, - .update_status = set_lcd_status, -}; - -static void toshiba_acpi_exit(void) -{ - if (toshiba_acpi.poll_dev) { - input_unregister_polled_device(toshiba_acpi.poll_dev); - input_free_polled_device(toshiba_acpi.poll_dev); - } - - if (toshiba_acpi.rfk_dev) - rfkill_unregister(toshiba_acpi.rfk_dev); - - if (toshiba_backlight_device) - backlight_device_unregister(toshiba_backlight_device); - - remove_device(); - - if (toshiba_proc_dir) - remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); - - platform_device_unregister(toshiba_acpi.p_dev); - - return; -} - -static int __init toshiba_acpi_init(void) -{ - acpi_status status = AE_OK; - u32 hci_result; - bool bt_present; - bool bt_on; - bool radio_on; - int ret = 0; - - if (acpi_disabled) - return -ENODEV; - - /* simple device detection: look for HCI method */ - if (is_valid_acpi_path(METHOD_HCI_1)) - method_hci = METHOD_HCI_1; - else if (is_valid_acpi_path(METHOD_HCI_2)) - method_hci = METHOD_HCI_2; - else - return -ENODEV; - - printk(MY_INFO "Toshiba Laptop ACPI Extras version %s\n", - TOSHIBA_ACPI_VERSION); - printk(MY_INFO " HCI method: %s\n", method_hci); - - mutex_init(&toshiba_acpi.mutex); - - toshiba_acpi.p_dev = platform_device_register_simple("toshiba_acpi", - -1, NULL, 0); - if (IS_ERR(toshiba_acpi.p_dev)) { - ret = PTR_ERR(toshiba_acpi.p_dev); - printk(MY_ERR "unable to register platform device\n"); - toshiba_acpi.p_dev = NULL; - toshiba_acpi_exit(); - return ret; - } - - force_fan = 0; - key_event_valid = 0; - - /* enable event fifo */ - hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result); - - toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir); - if (!toshiba_proc_dir) { - toshiba_acpi_exit(); - return -ENODEV; - } else { - toshiba_proc_dir->owner = THIS_MODULE; - status = add_device(); - if (ACPI_FAILURE(status)) { - toshiba_acpi_exit(); - return -ENODEV; - } - } - - toshiba_backlight_device = backlight_device_register("toshiba", - &toshiba_acpi.p_dev->dev, - NULL, - &toshiba_backlight_data); - if (IS_ERR(toshiba_backlight_device)) { - ret = PTR_ERR(toshiba_backlight_device); - - printk(KERN_ERR "Could not register toshiba backlight device\n"); - toshiba_backlight_device = NULL; - toshiba_acpi_exit(); - return ret; - } - toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; - - /* Register rfkill switch for Bluetooth */ - if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) { - toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev, - RFKILL_TYPE_BLUETOOTH); - if (!toshiba_acpi.rfk_dev) { - printk(MY_ERR "unable to allocate rfkill device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - - toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name; - toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio; - toshiba_acpi.rfk_dev->user_claim_unsupported = 1; - toshiba_acpi.rfk_dev->data = &toshiba_acpi; - - if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) { - toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED; - } else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS && - radio_on) { - toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED; - } else { - toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED; - } - - ret = rfkill_register(toshiba_acpi.rfk_dev); - if (ret) { - printk(MY_ERR "unable to register rfkill device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - - /* Register input device for kill switch */ - toshiba_acpi.poll_dev = input_allocate_polled_device(); - if (!toshiba_acpi.poll_dev) { - printk(MY_ERR - "unable to allocate kill-switch input device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - toshiba_acpi.poll_dev->private = &toshiba_acpi; - toshiba_acpi.poll_dev->poll = bt_poll_rfkill; - toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ - - toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; - toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; - /* Toshiba USB ID */ - toshiba_acpi.poll_dev->input->id.vendor = 0x0930; - set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); - set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); - input_report_switch(toshiba_acpi.poll_dev->input, - SW_RFKILL_ALL, TRUE); - input_sync(toshiba_acpi.poll_dev->input); - - ret = input_register_polled_device(toshiba_acpi.poll_dev); - if (ret) { - printk(MY_ERR - "unable to register kill-switch input device\n"); - toshiba_acpi_exit(); - return ret; - } - } - - return 0; -} - -module_init(toshiba_acpi_init); -module_exit(toshiba_acpi_exit); diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c deleted file mode 100644 index 8a8b377..0000000 --- a/drivers/acpi/wmi.c +++ /dev/null @@ -1,747 +0,0 @@ -/* - * ACPI-WMI mapping driver - * - * Copyright (C) 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk> - * - * GUID parsing code from ldm.c is: - * Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org> - * Copyright (c) 2001-2007 Anton Altaparmakov - * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com> - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/list.h> -#include <linux/acpi.h> -#include <acpi/acpi_bus.h> -#include <acpi/acpi_drivers.h> - -ACPI_MODULE_NAME("wmi"); -MODULE_AUTHOR("Carlos Corbacho"); -MODULE_DESCRIPTION("ACPI-WMI Mapping Driver"); -MODULE_LICENSE("GPL"); - -#define ACPI_WMI_CLASS "wmi" - -#undef PREFIX -#define PREFIX "ACPI: WMI: " - -static DEFINE_MUTEX(wmi_data_lock); - -struct guid_block { - char guid[16]; - union { - char object_id[2]; - struct { - unsigned char notify_id; - unsigned char reserved; - }; - }; - u8 instance_count; - u8 flags; -}; - -struct wmi_block { - struct list_head list; - struct guid_block gblock; - acpi_handle handle; - wmi_notify_handler handler; - void *handler_data; -}; - -static struct wmi_block wmi_blocks; - -/* - * If the GUID data block is marked as expensive, we must enable and - * explicitily disable data collection. - */ -#define ACPI_WMI_EXPENSIVE 0x1 -#define ACPI_WMI_METHOD 0x2 /* GUID is a method */ -#define ACPI_WMI_STRING 0x4 /* GUID takes & returns a string */ -#define ACPI_WMI_EVENT 0x8 /* GUID is an event */ - -static int acpi_wmi_remove(struct acpi_device *device, int type); -static int acpi_wmi_add(struct acpi_device *device); - -static const struct acpi_device_id wmi_device_ids[] = { - {"PNP0C14", 0}, - {"pnp0c14", 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, wmi_device_ids); - -static struct acpi_driver acpi_wmi_driver = { - .name = "wmi", - .class = ACPI_WMI_CLASS, - .ids = wmi_device_ids, - .ops = { - .add = acpi_wmi_add, - .remove = acpi_wmi_remove, - }, -}; - -/* - * GUID parsing functions - */ - -/** - * wmi_parse_hexbyte - Convert a ASCII hex number to a byte - * @src: Pointer to at least 2 characters to convert. - * - * Convert a two character ASCII hex string to a number. - * - * Return: 0-255 Success, the byte was parsed correctly - * -1 Error, an invalid character was supplied - */ -static int wmi_parse_hexbyte(const u8 *src) -{ - unsigned int x; /* For correct wrapping */ - int h; - - /* high part */ - x = src[0]; - if (x - '0' <= '9' - '0') { - h = x - '0'; - } else if (x - 'a' <= 'f' - 'a') { - h = x - 'a' + 10; - } else if (x - 'A' <= 'F' - 'A') { - h = x - 'A' + 10; - } else { - return -1; - } - h <<= 4; - - /* low part */ - x = src[1]; - if (x - '0' <= '9' - '0') - return h | (x - '0'); - if (x - 'a' <= 'f' - 'a') - return h | (x - 'a' + 10); - if (x - 'A' <= 'F' - 'A') - return h | (x - 'A' + 10); - return -1; -} - -/** - * wmi_swap_bytes - Rearrange GUID bytes to match GUID binary - * @src: Memory block holding binary GUID (16 bytes) - * @dest: Memory block to hold byte swapped binary GUID (16 bytes) - * - * Byte swap a binary GUID to match it's real GUID value - */ -static void wmi_swap_bytes(u8 *src, u8 *dest) -{ - int i; - - for (i = 0; i <= 3; i++) - memcpy(dest + i, src + (3 - i), 1); - - for (i = 0; i <= 1; i++) - memcpy(dest + 4 + i, src + (5 - i), 1); - - for (i = 0; i <= 1; i++) - memcpy(dest + 6 + i, src + (7 - i), 1); - - memcpy(dest + 8, src + 8, 8); -} - -/** - * wmi_parse_guid - Convert GUID from ASCII to binary - * @src: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba - * @dest: Memory block to hold binary GUID (16 bytes) - * - * N.B. The GUID need not be NULL terminated. - * - * Return: 'true' @dest contains binary GUID - * 'false' @dest contents are undefined - */ -static bool wmi_parse_guid(const u8 *src, u8 *dest) -{ - static const int size[] = { 4, 2, 2, 2, 6 }; - int i, j, v; - - if (src[8] != '-' || src[13] != '-' || - src[18] != '-' || src[23] != '-') - return false; - - for (j = 0; j < 5; j++, src++) { - for (i = 0; i < size[j]; i++, src += 2, *dest++ = v) { - v = wmi_parse_hexbyte(src); - if (v < 0) - return false; - } - } - - return true; -} - -static bool find_guid(const char *guid_string, struct wmi_block **out) -{ - char tmp[16], guid_input[16]; - struct wmi_block *wblock; - struct guid_block *block; - struct list_head *p; - - wmi_parse_guid(guid_string, tmp); - wmi_swap_bytes(tmp, guid_input); - - list_for_each(p, &wmi_blocks.list) { - wblock = list_entry(p, struct wmi_block, list); - block = &wblock->gblock; - - if (memcmp(block->guid, guid_input, 16) == 0) { - if (out) - *out = wblock; - return 1; - } - } - return 0; -} - -static acpi_status wmi_method_enable(struct wmi_block *wblock, int enable) -{ - struct guid_block *block = NULL; - char method[5]; - struct acpi_object_list input; - union acpi_object params[1]; - acpi_status status; - acpi_handle handle; - - block = &wblock->gblock; - handle = wblock->handle; - - if (!block) - return AE_NOT_EXIST; - - input.count = 1; - input.pointer = params; - params[0].type = ACPI_TYPE_INTEGER; - params[0].integer.value = enable; - - snprintf(method, 5, "WE%02X", block->notify_id); - status = acpi_evaluate_object(handle, method, &input, NULL); - - if (status != AE_OK && status != AE_NOT_FOUND) - return status; - else - return AE_OK; -} - -/* - * Exported WMI functions - */ -/** - * wmi_evaluate_method - Evaluate a WMI method - * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba - * @instance: Instance index - * @method_id: Method ID to call - * &in: Buffer containing input for the method call - * &out: Empty buffer to return the method results - * - * Call an ACPI-WMI method - */ -acpi_status wmi_evaluate_method(const char *guid_string, u8 instance, -u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out) -{ - struct guid_block *block = NULL; - struct wmi_block *wblock = NULL; - acpi_handle handle; - acpi_status status; - struct acpi_object_list input; - union acpi_object params[3]; - char method[4] = "WM"; - - if (!find_guid(guid_string, &wblock)) - return AE_ERROR; - - block = &wblock->gblock; - handle = wblock->handle; - - if (!(block->flags & ACPI_WMI_METHOD)) - return AE_BAD_DATA; - - if (block->instance_count < instance) - return AE_BAD_PARAMETER; - - input.count = 2; - input.pointer = params; - params[0].type = ACPI_TYPE_INTEGER; - params[0].integer.value = instance; - params[1].type = ACPI_TYPE_INTEGER; - params[1].integer.value = method_id; - - if (in) { - input.count = 3; - - if (block->flags & ACPI_WMI_STRING) { - params[2].type = ACPI_TYPE_STRING; - } else { - params[2].type = ACPI_TYPE_BUFFER; - } - params[2].buffer.length = in->length; - params[2].buffer.pointer = in->pointer; - } - - strncat(method, block->object_id, 2); - - status = acpi_evaluate_object(handle, method, &input, out); - - return status; -} -EXPORT_SYMBOL_GPL(wmi_evaluate_method); - -/** - * wmi_query_block - Return contents of a WMI block - * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba - * @instance: Instance index - * &out: Empty buffer to return the contents of the data block to - * - * Return the contents of an ACPI-WMI data block to a buffer - */ -acpi_status wmi_query_block(const char *guid_string, u8 instance, -struct acpi_buffer *out) -{ - struct guid_block *block = NULL; - struct wmi_block *wblock = NULL; - acpi_handle handle, wc_handle; - acpi_status status, wc_status = AE_ERROR; - struct acpi_object_list input, wc_input; - union acpi_object wc_params[1], wq_params[1]; - char method[4]; - char wc_method[4] = "WC"; - - if (!guid_string || !out) - return AE_BAD_PARAMETER; - - if (!find_guid(guid_string, &wblock)) - return AE_ERROR; - - block = &wblock->gblock; - handle = wblock->handle; - - if (block->instance_count < instance) - return AE_BAD_PARAMETER; - - /* Check GUID is a data block */ - if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD)) - return AE_ERROR; - - input.count = 1; - input.pointer = wq_params; - wq_params[0].type = ACPI_TYPE_INTEGER; - wq_params[0].integer.value = instance; - - /* - * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method first to - * enable collection. - */ - if (block->flags & ACPI_WMI_EXPENSIVE) { - wc_input.count = 1; - wc_input.pointer = wc_params; - wc_params[0].type = ACPI_TYPE_INTEGER; - wc_params[0].integer.value = 1; - - strncat(wc_method, block->object_id, 2); - - /* - * Some GUIDs break the specification by declaring themselves - * expensive, but have no corresponding WCxx method. So we - * should not fail if this happens. - */ - wc_status = acpi_get_handle(handle, wc_method, &wc_handle); - if (ACPI_SUCCESS(wc_status)) - wc_status = acpi_evaluate_object(handle, wc_method, - &wc_input, NULL); - } - - strcpy(method, "WQ"); - strncat(method, block->object_id, 2); - - status = acpi_evaluate_object(handle, method, &input, out); - - /* - * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if - * the WQxx method failed - we should disable collection anyway. - */ - if ((block->flags & ACPI_WMI_EXPENSIVE) && ACPI_SUCCESS(wc_status)) { - wc_params[0].integer.value = 0; - status = acpi_evaluate_object(handle, - wc_method, &wc_input, NULL); - } - - return status; -} -EXPORT_SYMBOL_GPL(wmi_query_block); - -/** - * wmi_set_block - Write to a WMI block - * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba - * @instance: Instance index - * &in: Buffer containing new values for the data block - * - * Write the contents of the input buffer to an ACPI-WMI data block - */ -acpi_status wmi_set_block(const char *guid_string, u8 instance, -const struct acpi_buffer *in) -{ - struct guid_block *block = NULL; - struct wmi_block *wblock = NULL; - acpi_handle handle; - struct acpi_object_list input; - union acpi_object params[2]; - char method[4] = "WS"; - - if (!guid_string || !in) - return AE_BAD_DATA; - - if (!find_guid(guid_string, &wblock)) - return AE_ERROR; - - block = &wblock->gblock; - handle = wblock->handle; - - if (block->instance_count < instance) - return AE_BAD_PARAMETER; - - /* Check GUID is a data block */ - if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD)) - return AE_ERROR; - - input.count = 2; - input.pointer = params; - params[0].type = ACPI_TYPE_INTEGER; - params[0].integer.value = instance; - - if (block->flags & ACPI_WMI_STRING) { - params[1].type = ACPI_TYPE_STRING; - } else { - params[1].type = ACPI_TYPE_BUFFER; - } - params[1].buffer.length = in->length; - params[1].buffer.pointer = in->pointer; - - strncat(method, block->object_id, 2); - - return acpi_evaluate_object(handle, method, &input, NULL); -} -EXPORT_SYMBOL_GPL(wmi_set_block); - -/** - * wmi_install_notify_handler - Register handler for WMI events - * @handler: Function to handle notifications - * @data: Data to be returned to handler when event is fired - * - * Register a handler for events sent to the ACPI-WMI mapper device. - */ -acpi_status wmi_install_notify_handler(const char *guid, -wmi_notify_handler handler, void *data) -{ - struct wmi_block *block; - acpi_status status; - - if (!guid || !handler) - return AE_BAD_PARAMETER; - - find_guid(guid, &block); - if (!block) - return AE_NOT_EXIST; - - if (block->handler) - return AE_ALREADY_ACQUIRED; - - block->handler = handler; - block->handler_data = data; - - status = wmi_method_enable(block, 1); - - return status; -} -EXPORT_SYMBOL_GPL(wmi_install_notify_handler); - -/** - * wmi_uninstall_notify_handler - Unregister handler for WMI events - * - * Unregister handler for events sent to the ACPI-WMI mapper device. - */ -acpi_status wmi_remove_notify_handler(const char *guid) -{ - struct wmi_block *block; - acpi_status status; - - if (!guid) - return AE_BAD_PARAMETER; - - find_guid(guid, &block); - if (!block) - return AE_NOT_EXIST; - - if (!block->handler) - return AE_NULL_ENTRY; - - status = wmi_method_enable(block, 0); - - block->handler = NULL; - block->handler_data = NULL; - - return status; -} -EXPORT_SYMBOL_GPL(wmi_remove_notify_handler); - -/** - * wmi_get_event_data - Get WMI data associated with an event - * - * @event - Event to find - * &out - Buffer to hold event data - * - * Returns extra data associated with an event in WMI. - */ -acpi_status wmi_get_event_data(u32 event, struct acpi_buffer *out) -{ - struct acpi_object_list input; - union acpi_object params[1]; - struct guid_block *gblock; - struct wmi_block *wblock; - struct list_head *p; - - input.count = 1; - input.pointer = params; - params[0].type = ACPI_TYPE_INTEGER; - params[0].integer.value = event; - - list_for_each(p, &wmi_blocks.list) { - wblock = list_entry(p, struct wmi_block, list); - gblock = &wblock->gblock; - - if ((gblock->flags & ACPI_WMI_EVENT) && - (gblock->notify_id == event)) - return acpi_evaluate_object(wblock->handle, "_WED", - &input, out); - } - - return AE_NOT_FOUND; -} -EXPORT_SYMBOL_GPL(wmi_get_event_data); - -/** - * wmi_has_guid - Check if a GUID is available - * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba - * - * Check if a given GUID is defined by _WDG - */ -bool wmi_has_guid(const char *guid_string) -{ - return find_guid(guid_string, NULL); -} -EXPORT_SYMBOL_GPL(wmi_has_guid); - -/* - * Parse the _WDG method for the GUID data blocks - */ -static __init acpi_status parse_wdg(acpi_handle handle) -{ - struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *obj; - struct guid_block *gblock; - struct wmi_block *wblock; - acpi_status status; - u32 i, total; - - status = acpi_evaluate_object(handle, "_WDG", NULL, &out); - - if (ACPI_FAILURE(status)) - return status; - - obj = (union acpi_object *) out.pointer; - - if (obj->type != ACPI_TYPE_BUFFER) - return AE_ERROR; - - total = obj->buffer.length / sizeof(struct guid_block); - - gblock = kzalloc(obj->buffer.length, GFP_KERNEL); - if (!gblock) - return AE_NO_MEMORY; - - memcpy(gblock, obj->buffer.pointer, obj->buffer.length); - - for (i = 0; i < total; i++) { - wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL); - if (!wblock) - return AE_NO_MEMORY; - - wblock->gblock = gblock[i]; - wblock->handle = handle; - list_add_tail(&wblock->list, &wmi_blocks.list); - } - - kfree(out.pointer); - kfree(gblock); - - return status; -} - -/* - * WMI can have EmbeddedControl access regions. In which case, we just want to - * hand these off to the EC driver. - */ -static acpi_status -acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address, - u32 bits, acpi_integer * value, - void *handler_context, void *region_context) -{ - int result = 0, i = 0; - u8 temp = 0; - - if ((address > 0xFF) || !value) - return AE_BAD_PARAMETER; - - if (function != ACPI_READ && function != ACPI_WRITE) - return AE_BAD_PARAMETER; - - if (bits != 8) - return AE_BAD_PARAMETER; - - if (function == ACPI_READ) { - result = ec_read(address, &temp); - (*value) |= ((acpi_integer)temp) << i; - } else { - temp = 0xff & ((*value) >> i); - result = ec_write(address, temp); - } - - switch (result) { - case -EINVAL: - return AE_BAD_PARAMETER; - break; - case -ENODEV: - return AE_NOT_FOUND; - break; - case -ETIME: - return AE_TIME; - break; - default: - return AE_OK; - } -} - -static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) -{ - struct guid_block *block; - struct wmi_block *wblock; - struct list_head *p; - struct acpi_device *device = data; - - list_for_each(p, &wmi_blocks.list) { - wblock = list_entry(p, struct wmi_block, list); - block = &wblock->gblock; - - if ((block->flags & ACPI_WMI_EVENT) && - (block->notify_id == event)) { - if (wblock->handler) - wblock->handler(event, wblock->handler_data); - - acpi_bus_generate_netlink_event( - device->pnp.device_class, dev_name(&device->dev), - event, 0); - break; - } - } -} - -static int acpi_wmi_remove(struct acpi_device *device, int type) -{ - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_wmi_notify); - - acpi_remove_address_space_handler(device->handle, - ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler); - - return 0; -} - -static int __init acpi_wmi_add(struct acpi_device *device) -{ - acpi_status status; - int result = 0; - - status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_wmi_notify, device); - if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Error installing notify handler\n"); - return -ENODEV; - } - - status = acpi_install_address_space_handler(device->handle, - ACPI_ADR_SPACE_EC, - &acpi_wmi_ec_space_handler, - NULL, NULL); - if (ACPI_FAILURE(status)) - return -ENODEV; - - status = parse_wdg(device->handle); - if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Error installing EC region handler\n"); - return -ENODEV; - } - - return result; -} - -static int __init acpi_wmi_init(void) -{ - acpi_status result; - - INIT_LIST_HEAD(&wmi_blocks.list); - - if (acpi_disabled) - return -ENODEV; - - result = acpi_bus_register_driver(&acpi_wmi_driver); - - if (result < 0) { - printk(KERN_INFO PREFIX "Error loading mapper\n"); - } else { - printk(KERN_INFO PREFIX "Mapper loaded\n"); - } - - return result; -} - -static void __exit acpi_wmi_exit(void) -{ - struct list_head *p, *tmp; - struct wmi_block *wblock; - - acpi_bus_unregister_driver(&acpi_wmi_driver); - - list_for_each_safe(p, tmp, &wmi_blocks.list) { - wblock = list_entry(p, struct wmi_block, list); - - list_del(p); - kfree(wblock); - } - - printk(KERN_INFO PREFIX "Mapper unloaded\n"); -} - -subsys_initcall(acpi_wmi_init); -module_exit(acpi_wmi_exit); |
