diff options
Diffstat (limited to 'drivers/acpi')
-rw-r--r-- | drivers/acpi/Kconfig | 3 | ||||
-rw-r--r-- | drivers/acpi/battery.c | 2 | ||||
-rw-r--r-- | drivers/acpi/glue.c | 113 | ||||
-rw-r--r-- | drivers/acpi/sbs.c | 2 | ||||
-rw-r--r-- | drivers/acpi/sleep/proc.c | 18 | ||||
-rw-r--r-- | drivers/acpi/system.c | 1 | ||||
-rw-r--r-- | drivers/acpi/toshiba_acpi.c | 261 |
7 files changed, 267 insertions, 133 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index cbfc58d..dc1de72 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -253,6 +253,9 @@ config ACPI_ASUS config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on X86 && INPUT + select INPUT_POLLDEV + select NET + select RFKILL select BACKLIGHT_CLASS_DEVICE ---help--- This driver adds support for access to certain system settings diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index de80469..b2133e8 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -431,7 +431,7 @@ static ssize_t acpi_battery_alarm_store(struct device *dev, } static struct device_attribute alarm_attr = { - .attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE}, + .attr = {.name = "alarm", .mode = 0644}, .show = acpi_battery_alarm_show, .store = acpi_battery_alarm_store, }; diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 8dd3336..24649ad 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -260,116 +260,3 @@ static int __init init_acpi_device_notify(void) } arch_initcall(init_acpi_device_notify); - - -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) - -#ifdef CONFIG_PM -static u32 rtc_handler(void *context) -{ - acpi_clear_event(ACPI_EVENT_RTC); - acpi_disable_event(ACPI_EVENT_RTC, 0); - return ACPI_INTERRUPT_HANDLED; -} - -static inline void rtc_wake_setup(void) -{ - acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); - /* - * After the RTC handler is installed, the Fixed_RTC event should - * be disabled. Only when the RTC alarm is set will it be enabled. - */ - acpi_clear_event(ACPI_EVENT_RTC); - acpi_disable_event(ACPI_EVENT_RTC, 0); -} - -static void rtc_wake_on(struct device *dev) -{ - acpi_clear_event(ACPI_EVENT_RTC); - acpi_enable_event(ACPI_EVENT_RTC, 0); -} - -static void rtc_wake_off(struct device *dev) -{ - acpi_disable_event(ACPI_EVENT_RTC, 0); -} -#else -#define rtc_wake_setup() do{}while(0) -#define rtc_wake_on NULL -#define rtc_wake_off NULL -#endif - -/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find - * its device node and pass extra config data. This helps its driver use - * capabilities that the now-obsolete mc146818 didn't have, and informs it - * that this board's RTC is wakeup-capable (per ACPI spec). - */ -#include <linux/mc146818rtc.h> - -static struct cmos_rtc_board_info rtc_info; - - -/* PNP devices are registered in a subsys_initcall(); - * ACPI specifies the PNP IDs to use. - */ -#include <linux/pnp.h> - -static int __init pnp_match(struct device *dev, void *data) -{ - static const char *ids[] = { "PNP0b00", "PNP0b01", "PNP0b02", }; - struct pnp_dev *pnp = to_pnp_dev(dev); - int i; - - for (i = 0; i < ARRAY_SIZE(ids); i++) { - if (compare_pnp_id(pnp->id, ids[i]) != 0) - return 1; - } - return 0; -} - -static struct device *__init get_rtc_dev(void) -{ - return bus_find_device(&pnp_bus_type, NULL, NULL, pnp_match); -} - -static int __init acpi_rtc_init(void) -{ - struct device *dev = get_rtc_dev(); - - if (acpi_disabled) - return 0; - - if (dev) { - rtc_wake_setup(); - rtc_info.wake_on = rtc_wake_on; - rtc_info.wake_off = rtc_wake_off; - - /* workaround bug in some ACPI tables */ - if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) { - DBG("bogus FADT month_alarm\n"); - acpi_gbl_FADT.month_alarm = 0; - } - - rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm; - rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm; - rtc_info.rtc_century = acpi_gbl_FADT.century; - - /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */ - if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE) - printk(PREFIX "RTC can wake from S4\n"); - - - dev->platform_data = &rtc_info; - - /* RTC always wakes from S1/S2/S3, and often S4/STD */ - device_init_wakeup(dev, 1); - - put_device(dev); - } else - DBG("RTC unavailable?\n"); - return 0; -} -/* do this between RTC subsys_initcall() and rtc_cmos driver_initcall() */ -fs_initcall(acpi_rtc_init); - -#endif diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index d003325..6050ce4 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -463,7 +463,7 @@ static ssize_t acpi_battery_alarm_store(struct device *dev, } static struct device_attribute alarm_attr = { - .attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE}, + .attr = {.name = "alarm", .mode = 0644}, .show = acpi_battery_alarm_show, .store = acpi_battery_alarm_store, }; diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index bf5b04d..631ee2e 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -120,13 +120,13 @@ static int acpi_system_alarm_seq_show(struct seq_file *seq, void *offset) spin_unlock_irqrestore(&rtc_lock, flags); if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hr); - BCD_TO_BIN(day); - BCD_TO_BIN(mo); - BCD_TO_BIN(yr); - BCD_TO_BIN(cent); + sec = bcd2bin(sec); + min = bcd2bin(min); + hr = bcd2bin(hr); + day = bcd2bin(day); + mo = bcd2bin(mo); + yr = bcd2bin(yr); + cent = bcd2bin(cent); } /* we're trusting the FADT (see above) */ @@ -204,7 +204,7 @@ static u32 cmos_bcd_read(int offset, int rtc_control) { u32 val = CMOS_READ(offset); if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(val); + val = bcd2bin(val); return val; } @@ -212,7 +212,7 @@ static u32 cmos_bcd_read(int offset, int rtc_control) static void cmos_bcd_write(u32 val, int offset, int rtc_control) { if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BIN_TO_BCD(val); + val = bin2bcd(val); CMOS_WRITE(val, offset); } diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 3eefd6d..1d74171 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -115,7 +115,6 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, table_attr->attr.read = acpi_table_show; table_attr->attr.attr.name = table_attr->name; table_attr->attr.attr.mode = 0444; - table_attr->attr.attr.owner = THIS_MODULE; return; } diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 4172d29..2a632f8 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -3,6 +3,7 @@ * * * Copyright (C) 2002-2004 John Belmonte + * Copyright (C) 2008 Philip Langdale * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,7 +34,7 @@ * */ -#define TOSHIBA_ACPI_VERSION "0.18" +#define TOSHIBA_ACPI_VERSION "0.19" #define PROC_INTERFACE_VERSION 1 #include <linux/kernel.h> @@ -42,6 +43,9 @@ #include <linux/types.h> #include <linux/proc_fs.h> #include <linux/backlight.h> +#include <linux/platform_device.h> +#include <linux/rfkill.h> +#include <linux/input-polldev.h> #include <asm/uaccess.h> @@ -90,6 +94,7 @@ MODULE_LICENSE("GPL"); #define HCI_VIDEO_OUT 0x001c #define HCI_HOTKEY_EVENT 0x001e #define HCI_LCD_BRIGHTNESS 0x002a +#define HCI_WIRELESS 0x0056 /* field definitions */ #define HCI_LCD_BRIGHTNESS_BITS 3 @@ -98,9 +103,14 @@ MODULE_LICENSE("GPL"); #define HCI_VIDEO_OUT_LCD 0x1 #define HCI_VIDEO_OUT_CRT 0x2 #define HCI_VIDEO_OUT_TV 0x4 +#define HCI_WIRELESS_KILL_SWITCH 0x01 +#define HCI_WIRELESS_BT_PRESENT 0x0f +#define HCI_WIRELESS_BT_ATTACH 0x40 +#define HCI_WIRELESS_BT_POWER 0x80 static const struct acpi_device_id toshiba_device_ids[] = { {"TOS6200", 0}, + {"TOS6208", 0}, {"TOS1900", 0}, {"", 0}, }; @@ -193,7 +203,7 @@ static acpi_status hci_raw(const u32 in[HCI_WORDS], u32 out[HCI_WORDS]) return status; } -/* common hci tasks (get or set one value) +/* common hci tasks (get or set one or two value) * * In addition to the ACPI status, the HCI system returns a result which * may be useful (such as "not supported"). @@ -218,6 +228,152 @@ static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result) return status; } +static acpi_status hci_write2(u32 reg, u32 in1, u32 in2, u32 *result) +{ + u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 }; + u32 out[HCI_WORDS]; + acpi_status status = hci_raw(in, out); + *result = (status == AE_OK) ? out[0] : HCI_FAILURE; + return status; +} + +static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result) +{ + u32 in[HCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 }; + u32 out[HCI_WORDS]; + acpi_status status = hci_raw(in, out); + *out1 = out[2]; + *out2 = out[3]; + *result = (status == AE_OK) ? out[0] : HCI_FAILURE; + return status; +} + +struct toshiba_acpi_dev { + struct platform_device *p_dev; + struct rfkill *rfk_dev; + struct input_polled_dev *poll_dev; + + const char *bt_name; + const char *rfk_name; + + bool last_rfk_state; + + struct mutex mutex; +}; + +static struct toshiba_acpi_dev toshiba_acpi = { + .bt_name = "Toshiba Bluetooth", + .rfk_name = "Toshiba RFKill Switch", + .last_rfk_state = false, +}; + +/* Bluetooth rfkill handlers */ + +static u32 hci_get_bt_present(bool *present) +{ + u32 hci_result; + u32 value, value2; + + value = 0; + value2 = 0; + hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); + if (hci_result == HCI_SUCCESS) + *present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false; + + return hci_result; +} + +static u32 hci_get_bt_on(bool *on) +{ + u32 hci_result; + u32 value, value2; + + value = 0; + value2 = 0x0001; + hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); + if (hci_result == HCI_SUCCESS) + *on = (value & HCI_WIRELESS_BT_POWER) && + (value & HCI_WIRELESS_BT_ATTACH); + + return hci_result; +} + +static u32 hci_get_radio_state(bool *radio_state) +{ + u32 hci_result; + u32 value, value2; + + value = 0; + value2 = 0x0001; + hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); + + *radio_state = value & HCI_WIRELESS_KILL_SWITCH; + return hci_result; +} + +static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state) +{ + u32 result1, result2; + u32 value; + bool radio_state; + struct toshiba_acpi_dev *dev = data; + + value = (state == RFKILL_STATE_UNBLOCKED); + + if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) + return -EFAULT; + + switch (state) { + case RFKILL_STATE_UNBLOCKED: + if (!radio_state) + return -EPERM; + break; + case RFKILL_STATE_SOFT_BLOCKED: + break; + default: + return -EINVAL; + } + + mutex_lock(&dev->mutex); + hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1); + hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2); + mutex_unlock(&dev->mutex); + + if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS) + return -EFAULT; + + return 0; +} + +static void bt_poll_rfkill(struct input_polled_dev *poll_dev) +{ + bool state_changed; + bool new_rfk_state; + bool value; + u32 hci_result; + struct toshiba_acpi_dev *dev = poll_dev->private; + + hci_result = hci_get_radio_state(&value); + if (hci_result != HCI_SUCCESS) + return; /* Can't do anything useful */ + + new_rfk_state = value; + + mutex_lock(&dev->mutex); + state_changed = new_rfk_state != dev->last_rfk_state; + dev->last_rfk_state = new_rfk_state; + mutex_unlock(&dev->mutex); + + if (unlikely(state_changed)) { + rfkill_force_state(dev->rfk_dev, + new_rfk_state ? + RFKILL_STATE_SOFT_BLOCKED : + RFKILL_STATE_HARD_BLOCKED); + input_report_switch(poll_dev->input, SW_RFKILL_ALL, + new_rfk_state); + } +} + static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ; static struct backlight_device *toshiba_backlight_device; static int force_fan; @@ -547,6 +703,14 @@ static struct backlight_ops toshiba_backlight_data = { static void toshiba_acpi_exit(void) { + if (toshiba_acpi.poll_dev) { + input_unregister_polled_device(toshiba_acpi.poll_dev); + input_free_polled_device(toshiba_acpi.poll_dev); + } + + if (toshiba_acpi.rfk_dev) + rfkill_unregister(toshiba_acpi.rfk_dev); + if (toshiba_backlight_device) backlight_device_unregister(toshiba_backlight_device); @@ -555,6 +719,8 @@ static void toshiba_acpi_exit(void) if (toshiba_proc_dir) remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); + platform_device_unregister(toshiba_acpi.p_dev); + return; } @@ -562,6 +728,10 @@ static int __init toshiba_acpi_init(void) { acpi_status status = AE_OK; u32 hci_result; + bool bt_present; + bool bt_on; + bool radio_on; + int ret = 0; if (acpi_disabled) return -ENODEV; @@ -578,6 +748,18 @@ static int __init toshiba_acpi_init(void) TOSHIBA_ACPI_VERSION); printk(MY_INFO " HCI method: %s\n", method_hci); + mutex_init(&toshiba_acpi.mutex); + + toshiba_acpi.p_dev = platform_device_register_simple("toshiba_acpi", + -1, NULL, 0); + if (IS_ERR(toshiba_acpi.p_dev)) { + ret = PTR_ERR(toshiba_acpi.p_dev); + printk(MY_ERR "unable to register platform device\n"); + toshiba_acpi.p_dev = NULL; + toshiba_acpi_exit(); + return ret; + } + force_fan = 0; key_event_valid = 0; @@ -586,19 +768,23 @@ static int __init toshiba_acpi_init(void) toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir); if (!toshiba_proc_dir) { - status = AE_ERROR; + toshiba_acpi_exit(); + return -ENODEV; } else { toshiba_proc_dir->owner = THIS_MODULE; status = add_device(); - if (ACPI_FAILURE(status)) - remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); + if (ACPI_FAILURE(status)) { + toshiba_acpi_exit(); + return -ENODEV; + } } - toshiba_backlight_device = backlight_device_register("toshiba",NULL, + toshiba_backlight_device = backlight_device_register("toshiba", + &toshiba_acpi.p_dev->dev, NULL, &toshiba_backlight_data); if (IS_ERR(toshiba_backlight_device)) { - int ret = PTR_ERR(toshiba_backlight_device); + ret = PTR_ERR(toshiba_backlight_device); printk(KERN_ERR "Could not register toshiba backlight device\n"); toshiba_backlight_device = NULL; @@ -607,7 +793,66 @@ static int __init toshiba_acpi_init(void) } toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; - return (ACPI_SUCCESS(status)) ? 0 : -ENODEV; + /* Register rfkill switch for Bluetooth */ + if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) { + toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev, + RFKILL_TYPE_BLUETOOTH); + if (!toshiba_acpi.rfk_dev) { + printk(MY_ERR "unable to allocate rfkill device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + + toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name; + toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio; + toshiba_acpi.rfk_dev->user_claim_unsupported = 1; + toshiba_acpi.rfk_dev->data = &toshiba_acpi; + + if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) { + toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED; + } else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS && + radio_on) { + toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED; + } else { + toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED; + } + + ret = rfkill_register(toshiba_acpi.rfk_dev); + if (ret) { + printk(MY_ERR "unable to register rfkill device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + } + + /* Register input device for kill switch */ + toshiba_acpi.poll_dev = input_allocate_polled_device(); + if (!toshiba_acpi.poll_dev) { + printk(MY_ERR "unable to allocate kill-switch input device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + toshiba_acpi.poll_dev->private = &toshiba_acpi; + toshiba_acpi.poll_dev->poll = bt_poll_rfkill; + toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ + + toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; + toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; + toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */ + set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); + set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); + input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE); + + ret = input_register_polled_device(toshiba_acpi.poll_dev); + if (ret) { + printk(MY_ERR "unable to register kill-switch input device\n"); + rfkill_free(toshiba_acpi.rfk_dev); + toshiba_acpi.rfk_dev = NULL; + toshiba_acpi_exit(); + return ret; + } + + return 0; } module_init(toshiba_acpi_init); |