diff options
Diffstat (limited to 'drivers/acpi')
-rw-r--r-- | drivers/acpi/Kconfig | 23 | ||||
-rw-r--r-- | drivers/acpi/Makefile | 4 | ||||
-rw-r--r-- | drivers/acpi/pmic/intel_pmic.c | 354 | ||||
-rw-r--r-- | drivers/acpi/pmic/intel_pmic.h | 25 | ||||
-rw-r--r-- | drivers/acpi/pmic/intel_pmic_crc.c | 211 | ||||
-rw-r--r-- | drivers/acpi/pmic/intel_pmic_xpower.c | 268 | ||||
-rw-r--r-- | drivers/acpi/video.c | 15 |
7 files changed, 900 insertions, 0 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 79078b8..8951cefb 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -393,4 +393,27 @@ config ACPI_EXTLOG driver adds support for that functionality with corresponding tracepoint which carries that information to userspace. +menuconfig PMIC_OPREGION + bool "PMIC (Power Management Integrated Circuit) operation region support" + help + Select this option to enable support for ACPI operation + region of the PMIC chip. The operation region can be used + to control power rails and sensor reading/writing on the + PMIC chip. + +if PMIC_OPREGION +config CRC_PMIC_OPREGION + bool "ACPI operation region support for CrystalCove PMIC" + depends on INTEL_SOC_PMIC + help + This config adds ACPI operation region support for CrystalCove PMIC. + +config XPOWER_PMIC_OPREGION + bool "ACPI operation region support for XPower AXP288 PMIC" + depends on AXP288_ADC = y + help + This config adds ACPI operation region support for XPower AXP288 PMIC. + +endif + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 6d11522..f74317c 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -88,3 +88,7 @@ obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o obj-$(CONFIG_ACPI_APEI) += apei/ obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o + +obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o +obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o +obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c new file mode 100644 index 0000000..a732e5d --- /dev/null +++ b/drivers/acpi/pmic/intel_pmic.c @@ -0,0 +1,354 @@ +/* + * intel_pmic.c - Intel PMIC operation region driver + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/regmap.h> +#include "intel_pmic.h" + +#define PMIC_POWER_OPREGION_ID 0x8d +#define PMIC_THERMAL_OPREGION_ID 0x8c + +struct acpi_lpat { + int temp; + int raw; +}; + +struct intel_pmic_opregion { + struct mutex lock; + struct acpi_lpat *lpat; + int lpat_count; + struct regmap *regmap; + struct intel_pmic_opregion_data *data; +}; + +static int pmic_get_reg_bit(int address, struct pmic_table *table, + int count, int *reg, int *bit) +{ + int i; + + for (i = 0; i < count; i++) { + if (table[i].address == address) { + *reg = table[i].reg; + if (bit) + *bit = table[i].bit; + return 0; + } + } + return -ENOENT; +} + +/** + * raw_to_temp(): Return temperature from raw value through LPAT table + * + * @lpat: the temperature_raw mapping table + * @count: the count of the above mapping table + * @raw: the raw value, used as a key to get the temerature from the + * above mapping table + * + * A positive value will be returned on success, a negative errno will + * be returned in error cases. + */ +static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw) +{ + int i, delta_temp, delta_raw, temp; + + for (i = 0; i < count - 1; i++) { + if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) || + (raw <= lpat[i].raw && raw >= lpat[i+1].raw)) + break; + } + + if (i == count - 1) + return -ENOENT; + + delta_temp = lpat[i+1].temp - lpat[i].temp; + delta_raw = lpat[i+1].raw - lpat[i].raw; + temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw; + + return temp; +} + +/** + * temp_to_raw(): Return raw value from temperature through LPAT table + * + * @lpat: the temperature_raw mapping table + * @count: the count of the above mapping table + * @temp: the temperature, used as a key to get the raw value from the + * above mapping table + * + * A positive value will be returned on success, a negative errno will + * be returned in error cases. + */ +static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp) +{ + int i, delta_temp, delta_raw, raw; + + for (i = 0; i < count - 1; i++) { + if (temp >= lpat[i].temp && temp <= lpat[i+1].temp) + break; + } + + if (i == count - 1) + return -ENOENT; + + delta_temp = lpat[i+1].temp - lpat[i].temp; + delta_raw = lpat[i+1].raw - lpat[i].raw; + raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp; + + return raw; +} + +static void pmic_thermal_lpat(struct intel_pmic_opregion *opregion, + acpi_handle handle, struct device *dev) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj_p, *obj_e; + int *lpat, i; + acpi_status status; + + status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer); + if (ACPI_FAILURE(status)) + return; + + obj_p = (union acpi_object *)buffer.pointer; + if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) || + (obj_p->package.count % 2) || (obj_p->package.count < 4)) + goto out; + + lpat = devm_kmalloc(dev, sizeof(int) * obj_p->package.count, + GFP_KERNEL); + if (!lpat) + goto out; + + for (i = 0; i < obj_p->package.count; i++) { + obj_e = &obj_p->package.elements[i]; + if (obj_e->type != ACPI_TYPE_INTEGER) { + devm_kfree(dev, lpat); + goto out; + } + lpat[i] = (s64)obj_e->integer.value; + } + + opregion->lpat = (struct acpi_lpat *)lpat; + opregion->lpat_count = obj_p->package.count / 2; + +out: + kfree(buffer.pointer); +} + +static acpi_status intel_pmic_power_handler(u32 function, + acpi_physical_address address, u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + struct intel_pmic_opregion *opregion = region_context; + struct regmap *regmap = opregion->regmap; + struct intel_pmic_opregion_data *d = opregion->data; + int reg, bit, result; + + if (bits != 32 || !value64) + return AE_BAD_PARAMETER; + + if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1)) + return AE_BAD_PARAMETER; + + result = pmic_get_reg_bit(address, d->power_table, + d->power_table_count, ®, &bit); + if (result == -ENOENT) + return AE_BAD_PARAMETER; + + mutex_lock(&opregion->lock); + + result = function == ACPI_READ ? + d->get_power(regmap, reg, bit, value64) : + d->update_power(regmap, reg, bit, *value64 == 1); + + mutex_unlock(&opregion->lock); + + return result ? AE_ERROR : AE_OK; +} + +static int pmic_read_temp(struct intel_pmic_opregion *opregion, + int reg, u64 *value) +{ + int raw_temp, temp; + + if (!opregion->data->get_raw_temp) + return -ENXIO; + + raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg); + if (raw_temp < 0) + return raw_temp; + + if (!opregion->lpat) { + *value = raw_temp; + return 0; + } + + temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp); + if (temp < 0) + return temp; + + *value = temp; + return 0; +} + +static int pmic_thermal_temp(struct intel_pmic_opregion *opregion, int reg, + u32 function, u64 *value) +{ + return function == ACPI_READ ? + pmic_read_temp(opregion, reg, value) : -EINVAL; +} + +static int pmic_thermal_aux(struct intel_pmic_opregion *opregion, int reg, + u32 function, u64 *value) +{ + int raw_temp; + + if (function == ACPI_READ) + return pmic_read_temp(opregion, reg, value); + + if (!opregion->data->update_aux) + return -ENXIO; + + if (opregion->lpat) { + raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count, + *value); + if (raw_temp < 0) + return raw_temp; + } else { + raw_temp = *value; + } + + return opregion->data->update_aux(opregion->regmap, reg, raw_temp); +} + +static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg, + u32 function, u64 *value) +{ + struct intel_pmic_opregion_data *d = opregion->data; + struct regmap *regmap = opregion->regmap; + + if (!d->get_policy || !d->update_policy) + return -ENXIO; + + if (function == ACPI_READ) + return d->get_policy(regmap, reg, value); + + if (*value != 0 && *value != 1) + return -EINVAL; + + return d->update_policy(regmap, reg, *value); +} + +static bool pmic_thermal_is_temp(int address) +{ + return (address <= 0x3c) && !(address % 12); +} + +static bool pmic_thermal_is_aux(int address) +{ + return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) || + (address >= 8 && address <= 0x44 && !((address - 8) % 12)); +} + +static bool pmic_thermal_is_pen(int address) +{ + return address >= 0x48 && address <= 0x5c; +} + +static acpi_status intel_pmic_thermal_handler(u32 function, + acpi_physical_address address, u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + struct intel_pmic_opregion *opregion = region_context; + struct intel_pmic_opregion_data *d = opregion->data; + int reg, result; + + if (bits != 32 || !value64) + return AE_BAD_PARAMETER; + + result = pmic_get_reg_bit(address, d->thermal_table, + d->thermal_table_count, ®, NULL); + if (result == -ENOENT) + return AE_BAD_PARAMETER; + + mutex_lock(&opregion->lock); + + if (pmic_thermal_is_temp(address)) + result = pmic_thermal_temp(opregion, reg, function, value64); + else if (pmic_thermal_is_aux(address)) + result = pmic_thermal_aux(opregion, reg, function, value64); + else if (pmic_thermal_is_pen(address)) + result = pmic_thermal_pen(opregion, reg, function, value64); + else + result = -EINVAL; + + mutex_unlock(&opregion->lock); + + if (result < 0) { + if (result == -EINVAL) + return AE_BAD_PARAMETER; + else + return AE_ERROR; + } + + return AE_OK; +} + +int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, + struct regmap *regmap, + struct intel_pmic_opregion_data *d) +{ + acpi_status status; + struct intel_pmic_opregion *opregion; + + if (!dev || !regmap || !d) + return -EINVAL; + + if (!handle) + return -ENODEV; + + opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL); + if (!opregion) + return -ENOMEM; + + mutex_init(&opregion->lock); + opregion->regmap = regmap; + pmic_thermal_lpat(opregion, handle, dev); + + status = acpi_install_address_space_handler(handle, + PMIC_POWER_OPREGION_ID, + intel_pmic_power_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) + return -ENODEV; + + status = acpi_install_address_space_handler(handle, + PMIC_THERMAL_OPREGION_ID, + intel_pmic_thermal_handler, + NULL, opregion); + if (ACPI_FAILURE(status)) { + acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID, + intel_pmic_power_handler); + return -ENODEV; + } + + opregion->data = d; + return 0; +} +EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler); + +MODULE_LICENSE("GPL"); diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h new file mode 100644 index 0000000..d4e90af --- /dev/null +++ b/drivers/acpi/pmic/intel_pmic.h @@ -0,0 +1,25 @@ +#ifndef __INTEL_PMIC_H +#define __INTEL_PMIC_H + +struct pmic_table { + int address; /* operation region address */ + int reg; /* corresponding thermal register */ + int bit; /* control bit for power */ +}; + +struct intel_pmic_opregion_data { + int (*get_power)(struct regmap *r, int reg, int bit, u64 *value); + int (*update_power)(struct regmap *r, int reg, int bit, bool on); + int (*get_raw_temp)(struct regmap *r, int reg); + int (*update_aux)(struct regmap *r, int reg, int raw_temp); + int (*get_policy)(struct regmap *r, int reg, u64 *value); + int (*update_policy)(struct regmap *r, int reg, int enable); + struct pmic_table *power_table; + int power_table_count; + struct pmic_table *thermal_table; + int thermal_table_count; +}; + +int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d); + +#endif diff --git a/drivers/acpi/pmic/intel_pmic_crc.c b/drivers/acpi/pmic/intel_pmic_crc.c new file mode 100644 index 0000000..ef7d8ff --- /dev/null +++ b/drivers/acpi/pmic/intel_pmic_crc.c @@ -0,0 +1,211 @@ +/* + * intel_pmic_crc.c - Intel CrystalCove PMIC operation region driver + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include "intel_pmic.h" + +#define PWR_SOURCE_SELECT BIT(1) + +#define PMIC_A0LOCK_REG 0xc5 + +static struct pmic_table power_table[] = { + { + .address = 0x24, + .reg = 0x66, + .bit = 0x00, + }, + { + .address = 0x48, + .reg = 0x5d, + .bit = 0x00, + }, +}; + +static struct pmic_table thermal_table[] = { + { + .address = 0x00, + .reg = 0x75 + }, + { + .address = 0x04, + .reg = 0x95 + }, + { + .address = 0x08, + .reg = 0x97 + }, + { + .address = 0x0c, + .reg = 0x77 + }, + { + .address = 0x10, + .reg = 0x9a + }, + { + .address = 0x14, + .reg = 0x9c + }, + { + .address = 0x18, + .reg = 0x79 + }, + { + .address = 0x1c, + .reg = 0x9f + }, + { + .address = 0x20, + .reg = 0xa1 + }, + { + .address = 0x48, + .reg = 0x94 + }, + { + .address = 0x4c, + .reg = 0x99 + }, + { + .address = 0x50, + .reg = 0x9e + }, +}; + +static int intel_crc_pmic_get_power(struct regmap *regmap, int reg, + int bit, u64 *value) +{ + int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = (data & PWR_SOURCE_SELECT) && (data & BIT(bit)) ? 1 : 0; + return 0; +} + +static int intel_crc_pmic_update_power(struct regmap *regmap, int reg, + int bit, bool on) +{ + int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + if (on) { + data |= PWR_SOURCE_SELECT | BIT(bit); + } else { + data &= ~BIT(bit); + data |= PWR_SOURCE_SELECT; + } + + if (regmap_write(regmap, reg, data)) + return -EIO; + return 0; +} + +static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg) +{ + int temp_l, temp_h; + + /* + * Raw temperature value is 10bits: 8bits in reg + * and 2bits in reg-1: bit0,1 + */ + if (regmap_read(regmap, reg, &temp_l) || + regmap_read(regmap, reg - 1, &temp_h)) + return -EIO; + + return temp_l | (temp_h & 0x3) << 8; +} + +static int intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw) +{ + return regmap_write(regmap, reg, raw) || + regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8) ? -EIO : 0; +} + +static int intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value) +{ + int pen; + + if (regmap_read(regmap, reg, &pen)) + return -EIO; + *value = pen >> 7; + return 0; +} + +static int intel_crc_pmic_update_policy(struct regmap *regmap, + int reg, int enable) +{ + int alert0; + + /* Update to policy enable bit requires unlocking a0lock */ + if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0)) + return -EIO; + + if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0)) + return -EIO; + + if (regmap_update_bits(regmap, reg, 0x80, enable << 7)) + return -EIO; + + /* restore alert0 */ + if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0)) + return -EIO; + + return 0; +} + +static struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = { + .get_power = intel_crc_pmic_get_power, + .update_power = intel_crc_pmic_update_power, + .get_raw_temp = intel_crc_pmic_get_raw_temp, + .update_aux = intel_crc_pmic_update_aux, + .get_policy = intel_crc_pmic_get_policy, + .update_policy = intel_crc_pmic_update_policy, + .power_table = power_table, + .power_table_count= ARRAY_SIZE(power_table), + .thermal_table = thermal_table, + .thermal_table_count = ARRAY_SIZE(thermal_table), +}; + +static int intel_crc_pmic_opregion_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + return intel_pmic_install_opregion_handler(&pdev->dev, + ACPI_HANDLE(pdev->dev.parent), pmic->regmap, + &intel_crc_pmic_opregion_data); +} + +static struct platform_driver intel_crc_pmic_opregion_driver = { + .probe = intel_crc_pmic_opregion_probe, + .driver = { + .name = "crystal_cove_pmic", + }, +}; + +static int __init intel_crc_pmic_opregion_driver_init(void) +{ + return platform_driver_register(&intel_crc_pmic_opregion_driver); +} +module_init(intel_crc_pmic_opregion_driver_init); + +MODULE_DESCRIPTION("CrystalCove ACPI opration region driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c new file mode 100644 index 0000000..6a082d4 --- /dev/null +++ b/drivers/acpi/pmic/intel_pmic_xpower.c @@ -0,0 +1,268 @@ +/* + * intel_pmic_xpower.c - XPower AXP288 PMIC operation region driver + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/mfd/axp20x.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <linux/iio/consumer.h> +#include "intel_pmic.h" + +#define XPOWER_GPADC_LOW 0x5b + +static struct pmic_table power_table[] = { + { + .address = 0x00, + .reg = 0x13, + .bit = 0x05, + }, + { + .address = 0x04, + .reg = 0x13, + .bit = 0x06, + }, + { + .address = 0x08, + .reg = 0x13, + .bit = 0x07, + }, + { + .address = 0x0c, + .reg = 0x12, + .bit = 0x03, + }, + { + .address = 0x10, + .reg = 0x12, + .bit = 0x04, + }, + { + .address = 0x14, + .reg = 0x12, + .bit = 0x05, + }, + { + .address = 0x18, + .reg = 0x12, + .bit = 0x06, + }, + { + .address = 0x1c, + .reg = 0x12, + .bit = 0x00, + }, + { + .address = 0x20, + .reg = 0x12, + .bit = 0x01, + }, + { + .address = 0x24, + .reg = 0x12, + .bit = 0x02, + }, + { + .address = 0x28, + .reg = 0x13, + .bit = 0x02, + }, + { + .address = 0x2c, + .reg = 0x13, + .bit = 0x03, + }, + { + .address = 0x30, + .reg = 0x13, + .bit = 0x04, + }, + { + .address = 0x38, + .reg = 0x10, + .bit = 0x03, + }, + { + .address = 0x3c, + .reg = 0x10, + .bit = 0x06, + }, + { + .address = 0x40, + .reg = 0x10, + .bit = 0x05, + }, + { + .address = 0x44, + .reg = 0x10, + .bit = 0x04, + }, + { + .address = 0x48, + .reg = 0x10, + .bit = 0x01, + }, + { + .address = 0x4c, + .reg = 0x10, + .bit = 0x00 + }, +}; + +/* TMP0 - TMP5 are the same, all from GPADC */ +static struct pmic_table thermal_table[] = { + { + .address = 0x00, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x0c, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x18, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x24, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x30, + .reg = XPOWER_GPADC_LOW + }, + { + .address = 0x3c, + .reg = XPOWER_GPADC_LOW + }, +}; + +static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg, + int bit, u64 *value) +{ + int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = (data & BIT(bit)) ? 1 : 0; + return 0; +} + +static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg, + int bit, bool on) +{ + int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + if (on) + data |= BIT(bit); + else + data &= ~BIT(bit); + + if (regmap_write(regmap, reg, data)) + return -EIO; + + return 0; +} + +/** + * intel_xpower_pmic_get_raw_temp(): Get raw temperature reading from the PMIC + * + * @regmap: regmap of the PMIC device + * @reg: register to get the reading + * + * We could get the sensor value by manipulating the HW regs here, but since + * the axp288 IIO driver may also access the same regs at the same time, the + * APIs provided by IIO subsystem are used here instead to avoid problems. As + * a result, the two passed in params are of no actual use. + * + * Return a positive value on success, errno on failure. + */ +static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg) +{ + struct iio_channel *gpadc_chan; + int ret, val; + + gpadc_chan = iio_channel_get(NULL, "axp288-system-temp"); + if (IS_ERR_OR_NULL(gpadc_chan)) + return -EACCES; + + ret = iio_read_channel_raw(gpadc_chan, &val); + if (ret < 0) + val = ret; + + iio_channel_release(gpadc_chan); + return val; +} + +static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = { + .get_power = intel_xpower_pmic_get_power, + .update_power = intel_xpower_pmic_update_power, + .get_raw_temp = intel_xpower_pmic_get_raw_temp, + .power_table = power_table, + .power_table_count = ARRAY_SIZE(power_table), + .thermal_table = thermal_table, + .thermal_table_count = ARRAY_SIZE(thermal_table), +}; + +static acpi_status intel_xpower_pmic_gpio_handler(u32 function, + acpi_physical_address address, u32 bit_width, u64 *value, + void *handler_context, void *region_context) +{ + return AE_OK; +} + +static int intel_xpower_pmic_opregion_probe(struct platform_device *pdev) +{ + struct device *parent = pdev->dev.parent; + struct axp20x_dev *axp20x = dev_get_drvdata(parent); + acpi_status status; + int result; + + status = acpi_install_address_space_handler(ACPI_HANDLE(parent), + ACPI_ADR_SPACE_GPIO, intel_xpower_pmic_gpio_handler, + NULL, NULL); + if (ACPI_FAILURE(status)) + return -ENODEV; + + result = intel_pmic_install_opregion_handler(&pdev->dev, + ACPI_HANDLE(parent), axp20x->regmap, + &intel_xpower_pmic_opregion_data); + if (result) + acpi_remove_address_space_handler(ACPI_HANDLE(parent), + ACPI_ADR_SPACE_GPIO, + intel_xpower_pmic_gpio_handler); + + return result; +} + +static struct platform_driver intel_xpower_pmic_opregion_driver = { + .probe = intel_xpower_pmic_opregion_probe, + .driver = { + .name = "axp288_pmic_acpi", + }, +}; + +static int __init intel_xpower_pmic_opregion_driver_init(void) +{ + return platform_driver_register(&intel_xpower_pmic_opregion_driver); +} +module_init(intel_xpower_pmic_opregion_driver_init); + +MODULE_DESCRIPTION("XPower AXP288 ACPI operation region driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 9d75ead..185a57d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1681,6 +1681,19 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device) printk(KERN_ERR PREFIX "Create sysfs link\n"); } +static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video) +{ + struct acpi_video_device *dev; + union acpi_object *levels; + + mutex_lock(&video->device_list_lock); + list_for_each_entry(dev, &video->video_device_list, entry) { + if (!acpi_video_device_lcd_query_levels(dev, &levels)) + kfree(levels); + } + mutex_unlock(&video->device_list_lock); +} + static int acpi_video_bus_register_backlight(struct acpi_video_bus *video) { struct acpi_video_device *dev; @@ -1688,6 +1701,8 @@ static int acpi_video_bus_register_backlight(struct acpi_video_bus *video) if (video->backlight_registered) return 0; + acpi_video_run_bcl_for_osi(video); + if (!acpi_video_verify_backlight_support()) return 0; |