diff options
Diffstat (limited to 'drivers/acpi/resources/rsirq.c')
| -rw-r--r-- | drivers/acpi/resources/rsirq.c | 568 |
1 files changed, 123 insertions, 445 deletions
diff --git a/drivers/acpi/resources/rsirq.c b/drivers/acpi/resources/rsirq.c index 56043fe..1fa63bc 100644 --- a/drivers/acpi/resources/rsirq.c +++ b/drivers/acpi/resources/rsirq.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2005, R. Byron Moore + * Copyright (C) 2000 - 2006, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -49,504 +49,182 @@ ACPI_MODULE_NAME("rsirq") /******************************************************************************* * - * FUNCTION: acpi_rs_irq_resource - * - * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte - * stream - * bytes_consumed - Pointer to where the number of bytes - * consumed the byte_stream_buffer is - * returned - * output_buffer - Pointer to the return data buffer - * structure_size - Pointer to where the number of bytes - * in the return data struct is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the resource byte stream and fill out the appropriate - * structure pointed to by the output_buffer. Return the - * number of bytes consumed from the byte stream. + * acpi_rs_get_irq * ******************************************************************************/ -acpi_status -acpi_rs_irq_resource(u8 * byte_stream_buffer, - acpi_size * bytes_consumed, - u8 ** output_buffer, acpi_size * structure_size) -{ - u8 *buffer = byte_stream_buffer; - struct acpi_resource *output_struct = (void *)*output_buffer; - u16 temp16 = 0; - u8 temp8 = 0; - u8 index; - u8 i; - acpi_size struct_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_irq); - - ACPI_FUNCTION_TRACE("rs_irq_resource"); - - /* - * The number of bytes consumed are contained in the descriptor - * (Bits:0-1) - */ - temp8 = *buffer; - *bytes_consumed = (temp8 & 0x03) + 1; - output_struct->id = ACPI_RSTYPE_IRQ; - - /* Point to the 16-bits of Bytes 1 and 2 */ - - buffer += 1; - ACPI_MOVE_16_TO_16(&temp16, buffer); - - output_struct->data.irq.number_of_interrupts = 0; - - /* Decode the IRQ bits */ - - for (i = 0, index = 0; index < 16; index++) { - if ((temp16 >> index) & 0x01) { - output_struct->data.irq.interrupts[i] = index; - i++; - } - } +struct acpi_rsconvert_info acpi_rs_get_irq[7] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_IRQ, + ACPI_RS_SIZE(struct acpi_resource_irq), + ACPI_RSC_TABLE_SIZE(acpi_rs_get_irq)}, - /* Zero interrupts is valid */ + /* Get the IRQ mask (bytes 1:2) */ - output_struct->data.irq.number_of_interrupts = i; - if (i > 0) { - /* Calculate the structure size based upon the number of interrupts */ + {ACPI_RSC_BITMASK16, ACPI_RS_OFFSET(data.irq.interrupts[0]), + AML_OFFSET(irq.irq_mask), + ACPI_RS_OFFSET(data.irq.interrupt_count)}, - struct_size += ((acpi_size) i - 1) * 4; - } + /* Set default flags (others are zero) */ - /* Point to Byte 3 if it is used */ + {ACPI_RSC_SET8, ACPI_RS_OFFSET(data.irq.triggering), + ACPI_EDGE_SENSITIVE, + 1}, - if (4 == *bytes_consumed) { - buffer += 2; - temp8 = *buffer; + /* All done if no flag byte present in descriptor */ - /* Check for HE, LL interrupts */ + {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_AML_LENGTH, 0, 3}, - switch (temp8 & 0x09) { - case 0x01: /* HE */ - output_struct->data.irq.edge_level = - ACPI_EDGE_SENSITIVE; - output_struct->data.irq.active_high_low = - ACPI_ACTIVE_HIGH; - break; + /* Get flags: Triggering[0], Polarity[3], Sharing[4] */ - case 0x08: /* LL */ - output_struct->data.irq.edge_level = - ACPI_LEVEL_SENSITIVE; - output_struct->data.irq.active_high_low = - ACPI_ACTIVE_LOW; - break; + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.triggering), + AML_OFFSET(irq.flags), + 0}, - default: - /* - * Only _LL and _HE polarity/trigger interrupts - * are allowed (ACPI spec, section "IRQ Format") - * so 0x00 and 0x09 are illegal. - */ - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Invalid interrupt polarity/trigger in resource list, %X\n", - temp8)); - return_ACPI_STATUS(AE_BAD_DATA); - } + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.polarity), + AML_OFFSET(irq.flags), + 3}, - /* Check for sharable */ - - output_struct->data.irq.shared_exclusive = (temp8 >> 3) & 0x01; - } else { - /* - * Assume Edge Sensitive, Active High, Non-Sharable - * per ACPI Specification - */ - output_struct->data.irq.edge_level = ACPI_EDGE_SENSITIVE; - output_struct->data.irq.active_high_low = ACPI_ACTIVE_HIGH; - output_struct->data.irq.shared_exclusive = ACPI_EXCLUSIVE; - } - - /* Set the Length parameter */ - - output_struct->length = (u32) struct_size; - - /* Return the final size of the structure */ - - *structure_size = struct_size; - return_ACPI_STATUS(AE_OK); -} + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.sharable), + AML_OFFSET(irq.flags), + 4} +}; /******************************************************************************* * - * FUNCTION: acpi_rs_irq_stream - * - * PARAMETERS: linked_list - Pointer to the resource linked list - * output_buffer - Pointer to the user's return buffer - * bytes_consumed - Pointer to where the number of bytes - * used in the output_buffer is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the linked list resource structure and fills in the - * the appropriate bytes in a byte stream + * acpi_rs_set_irq * ******************************************************************************/ -acpi_status -acpi_rs_irq_stream(struct acpi_resource *linked_list, - u8 ** output_buffer, acpi_size * bytes_consumed) -{ - u8 *buffer = *output_buffer; - u16 temp16 = 0; - u8 temp8 = 0; - u8 index; - u8 IRqinfo_byte_needed; - - ACPI_FUNCTION_TRACE("rs_irq_stream"); - - /* - * The descriptor field is set based upon whether a third byte is - * needed to contain the IRQ Information. - */ - if (ACPI_EDGE_SENSITIVE == linked_list->data.irq.edge_level && - ACPI_ACTIVE_HIGH == linked_list->data.irq.active_high_low && - ACPI_EXCLUSIVE == linked_list->data.irq.shared_exclusive) { - *buffer = 0x22; - IRqinfo_byte_needed = FALSE; - } else { - *buffer = 0x23; - IRqinfo_byte_needed = TRUE; - } - - buffer += 1; - temp16 = 0; - - /* Loop through all of the interrupts and set the mask bits */ - - for (index = 0; - index < linked_list->data.irq.number_of_interrupts; index++) { - temp8 = (u8) linked_list->data.irq.interrupts[index]; - temp16 |= 0x1 << temp8; - } - - ACPI_MOVE_16_TO_16(buffer, &temp16); - buffer += 2; - - /* Set the IRQ Info byte if needed. */ - - if (IRqinfo_byte_needed) { - temp8 = 0; - temp8 = (u8) ((linked_list->data.irq.shared_exclusive & - 0x01) << 4); - - if (ACPI_LEVEL_SENSITIVE == linked_list->data.irq.edge_level && - ACPI_ACTIVE_LOW == linked_list->data.irq.active_high_low) { - temp8 |= 0x08; - } else { - temp8 |= 0x01; - } - - *buffer = temp8; - buffer += 1; - } - - /* Return the number of bytes consumed in this operation */ - - *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer); - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_rs_extended_irq_resource - * - * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte - * stream - * bytes_consumed - Pointer to where the number of bytes - * consumed the byte_stream_buffer is - * returned - * output_buffer - Pointer to the return data buffer - * structure_size - Pointer to where the number of bytes - * in the return data struct is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the resource byte stream and fill out the appropriate - * structure pointed to by the output_buffer. Return the - * number of bytes consumed from the byte stream. - * - ******************************************************************************/ - -acpi_status -acpi_rs_extended_irq_resource(u8 * byte_stream_buffer, - acpi_size * bytes_consumed, - u8 ** output_buffer, acpi_size * structure_size) -{ - u8 *buffer = byte_stream_buffer; - struct acpi_resource *output_struct = (void *)*output_buffer; - u16 temp16 = 0; - u8 temp8 = 0; - u8 *temp_ptr; - u8 index; - acpi_size struct_size = - ACPI_SIZEOF_RESOURCE(struct acpi_resource_ext_irq); - - ACPI_FUNCTION_TRACE("rs_extended_irq_resource"); - - /* Get the Descriptor Length field */ - - buffer += 1; - ACPI_MOVE_16_TO_16(&temp16, buffer); - - /* Validate minimum descriptor length */ - - if (temp16 < 6) { - return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH); - } - - *bytes_consumed = temp16 + 3; - output_struct->id = ACPI_RSTYPE_EXT_IRQ; - - /* Point to the Byte3 */ - - buffer += 2; - temp8 = *buffer; - - output_struct->data.extended_irq.producer_consumer = temp8 & 0x01; +struct acpi_rsconvert_info acpi_rs_set_irq[9] = { + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_IRQ, + sizeof(struct aml_resource_irq), + ACPI_RSC_TABLE_SIZE(acpi_rs_set_irq)}, - /* - * Check for Interrupt Mode - * - * The definition of an Extended IRQ changed between ACPI spec v1.0b - * and ACPI spec 2.0 (section 6.4.3.6 in both). - * - * - Edge/Level are defined opposite in the table vs the headers - */ - output_struct->data.extended_irq.edge_level = - (temp8 & 0x2) ? ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE; - - /* Check Interrupt Polarity */ - - output_struct->data.extended_irq.active_high_low = (temp8 >> 2) & 0x1; - - /* Check for sharable */ - - output_struct->data.extended_irq.shared_exclusive = (temp8 >> 3) & 0x01; + /* Convert interrupt list to 16-bit IRQ bitmask */ - /* Point to Byte4 (IRQ Table length) */ + {ACPI_RSC_BITMASK16, ACPI_RS_OFFSET(data.irq.interrupts[0]), + AML_OFFSET(irq.irq_mask), + ACPI_RS_OFFSET(data.irq.interrupt_count)}, - buffer += 1; - temp8 = *buffer; + /* Set the flags byte by default */ - /* Must have at least one IRQ */ + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.triggering), + AML_OFFSET(irq.flags), + 0}, - if (temp8 < 1) { - return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH); - } - - output_struct->data.extended_irq.number_of_interrupts = temp8; + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.polarity), + AML_OFFSET(irq.flags), + 3}, + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.irq.sharable), + AML_OFFSET(irq.flags), + 4}, /* - * Add any additional structure size to properly calculate - * the next pointer at the end of this function + * Check if the flags byte is necessary. Not needed if the flags are: + * ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_HIGH, ACPI_EXCLUSIVE */ - struct_size += (temp8 - 1) * 4; - - /* Point to Byte5 (First IRQ Number) */ - - buffer += 1; - - /* Cycle through every IRQ in the table */ - - for (index = 0; index < temp8; index++) { - ACPI_MOVE_32_TO_32(&output_struct->data.extended_irq. - interrupts[index], buffer); - - /* Point to the next IRQ */ - - buffer += 4; - } - - /* - * This will leave us pointing to the Resource Source Index - * If it is present, then save it off and calculate the - * pointer to where the null terminated string goes: - * Each Interrupt takes 32-bits + the 5 bytes of the - * stream that are default. - * - * Note: Some resource descriptors will have an additional null, so - * we add 1 to the length. - */ - if (*bytes_consumed > - ((acpi_size) output_struct->data.extended_irq.number_of_interrupts * - 4) + (5 + 1)) { - /* Dereference the Index */ - - temp8 = *buffer; - output_struct->data.extended_irq.resource_source.index = - (u32) temp8; - - /* Point to the String */ - - buffer += 1; - - /* Point the String pointer to the end of this structure. */ - - output_struct->data.extended_irq.resource_source.string_ptr = - (char *)((char *)output_struct + struct_size); + {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_VALUE, + ACPI_RS_OFFSET(data.irq.triggering), + ACPI_EDGE_SENSITIVE}, - temp_ptr = (u8 *) - output_struct->data.extended_irq.resource_source.string_ptr; + {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_VALUE, + ACPI_RS_OFFSET(data.irq.polarity), + ACPI_ACTIVE_HIGH}, - /* Copy the string into the buffer */ + {ACPI_RSC_EXIT_NE, ACPI_RSC_COMPARE_VALUE, + ACPI_RS_OFFSET(data.irq.sharable), + ACPI_EXCLUSIVE}, - index = 0; - while (*buffer) { - *temp_ptr = *buffer; + /* irq_no_flags() descriptor can be used */ - temp_ptr += 1; - buffer += 1; - index += 1; - } - - /* Add the terminating null */ - - *temp_ptr = 0; - output_struct->data.extended_irq.resource_source.string_length = - index + 1; - - /* - * In order for the struct_size to fall on a 32-bit boundary, - * calculate the length of the string and expand the - * struct_size to the next 32-bit boundary. - */ - temp8 = (u8) (index + 1); - struct_size += ACPI_ROUND_UP_to_32_bITS(temp8); - } else { - output_struct->data.extended_irq.resource_source.index = 0; - output_struct->data.extended_irq.resource_source.string_length = - 0; - output_struct->data.extended_irq.resource_source.string_ptr = - NULL; - } - - /* Set the Length parameter */ - - output_struct->length = (u32) struct_size; - - /* Return the final size of the structure */ - - *structure_size = struct_size; - return_ACPI_STATUS(AE_OK); -} + {ACPI_RSC_LENGTH, 0, 0, sizeof(struct aml_resource_irq_noflags)} +}; /******************************************************************************* * - * FUNCTION: acpi_rs_extended_irq_stream - * - * PARAMETERS: linked_list - Pointer to the resource linked list - * output_buffer - Pointer to the user's return buffer - * bytes_consumed - Pointer to where the number of bytes - * used in the output_buffer is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the linked list resource structure and fills in the - * the appropriate bytes in a byte stream + * acpi_rs_convert_ext_irq * ******************************************************************************/ -acpi_status -acpi_rs_extended_irq_stream(struct acpi_resource *linked_list, - u8 ** output_buffer, acpi_size * bytes_consumed) -{ - u8 *buffer = *output_buffer; - u16 *length_field; - u8 temp8 = 0; - u8 index; +struct acpi_rsconvert_info acpi_rs_convert_ext_irq[9] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_EXTENDED_IRQ, + ACPI_RS_SIZE(struct acpi_resource_extended_irq), + ACPI_RSC_TABLE_SIZE(acpi_rs_convert_ext_irq)}, - ACPI_FUNCTION_TRACE("rs_extended_irq_stream"); + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_EXTENDED_IRQ, + sizeof(struct aml_resource_extended_irq), + 0}, - /* Set the Descriptor Type field */ + /* Flag bits */ - *buffer = ACPI_RDESC_TYPE_EXTENDED_XRUPT; - buffer += 1; + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.producer_consumer), + AML_OFFSET(extended_irq.flags), + 0}, - /* Save a pointer to the Length field - to be filled in later */ + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.triggering), + AML_OFFSET(extended_irq.flags), + 1}, - length_field = ACPI_CAST_PTR(u16, buffer); - buffer += 2; + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.polarity), + AML_OFFSET(extended_irq.flags), + 2}, - /* Set the Interrupt vector flags */ + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.extended_irq.sharable), + AML_OFFSET(extended_irq.flags), + 3}, - temp8 = (u8) (linked_list->data.extended_irq.producer_consumer & 0x01); - temp8 |= - ((linked_list->data.extended_irq.shared_exclusive & 0x01) << 3); + /* IRQ Table length (Byte4) */ - /* - * Set the Interrupt Mode - * - * The definition of an Extended IRQ changed between ACPI spec v1.0b - * and ACPI spec 2.0 (section 6.4.3.6 in both). This code does not - * implement the more restrictive definition of 1.0b - * - * - Edge/Level are defined opposite in the table vs the headers - */ - if (ACPI_EDGE_SENSITIVE == linked_list->data.extended_irq.edge_level) { - temp8 |= 0x2; - } - - /* Set the Interrupt Polarity */ + {ACPI_RSC_COUNT, ACPI_RS_OFFSET(data.extended_irq.interrupt_count), + AML_OFFSET(extended_irq.interrupt_count), + sizeof(u32)} + , - temp8 |= ((linked_list->data.extended_irq.active_high_low & 0x1) << 2); + /* Copy every IRQ in the table, each is 32 bits */ - *buffer = temp8; - buffer += 1; + {ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.extended_irq.interrupts[0]), + AML_OFFSET(extended_irq.interrupts[0]), + 0} + , - /* Set the Interrupt table length */ + /* Optional resource_source (Index and String) */ - temp8 = (u8) linked_list->data.extended_irq.number_of_interrupts; + {ACPI_RSC_SOURCEX, ACPI_RS_OFFSET(data.extended_irq.resource_source), + ACPI_RS_OFFSET(data.extended_irq.interrupts[0]), + sizeof(struct aml_resource_extended_irq)} +}; - *buffer = temp8; - buffer += 1; - - for (index = 0; - index < linked_list->data.extended_irq.number_of_interrupts; - index++) { - ACPI_MOVE_32_TO_32(buffer, - &linked_list->data.extended_irq. - interrupts[index]); - buffer += 4; - } +/******************************************************************************* + * + * acpi_rs_convert_dma + * + ******************************************************************************/ - /* Resource Source Index and Resource Source are optional */ +struct acpi_rsconvert_info acpi_rs_convert_dma[6] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_DMA, + ACPI_RS_SIZE(struct acpi_resource_dma), + ACPI_RSC_TABLE_SIZE(acpi_rs_convert_dma)}, - if (0 != linked_list->data.extended_irq.resource_source.string_length) { - *buffer = - (u8) linked_list->data.extended_irq.resource_source.index; - buffer += 1; + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_DMA, + sizeof(struct aml_resource_dma), + 0}, - /* Copy the string */ + /* Flags: transfer preference, bus mastering, channel speed */ - ACPI_STRCPY((char *)buffer, - linked_list->data.extended_irq.resource_source. - string_ptr); + {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.dma.transfer), + AML_OFFSET(dma.flags), + 0}, - /* - * Buffer needs to be set to the length of the string + one for the - * terminating null - */ - buffer += - (acpi_size) (ACPI_STRLEN - (linked_list->data.extended_irq. - resource_source.string_ptr) + 1); - } + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.dma.bus_master), + AML_OFFSET(dma.flags), + 2}, - /* Return the number of bytes consumed in this operation */ + {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.dma.type), + AML_OFFSET(dma.flags), + 5}, - *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer); + /* DMA channel mask bits */ - /* - * Set the length field to the number of bytes consumed - * minus the header size (3 bytes) - */ - *length_field = (u16) (*bytes_consumed - 3); - return_ACPI_STATUS(AE_OK); -} + {ACPI_RSC_BITMASK, ACPI_RS_OFFSET(data.dma.channels[0]), + AML_OFFSET(dma.dma_channel_mask), + ACPI_RS_OFFSET(data.dma.channel_count)} +}; |
