diff options
Diffstat (limited to 'drivers/acpi/parser/psloop.c')
| -rw-r--r-- | drivers/acpi/parser/psloop.c | 775 |
1 files changed, 775 insertions, 0 deletions
diff --git a/drivers/acpi/parser/psloop.c b/drivers/acpi/parser/psloop.c new file mode 100644 index 0000000..decb2e9 --- /dev/null +++ b/drivers/acpi/parser/psloop.c @@ -0,0 +1,775 @@ +/****************************************************************************** + * + * Module Name: psloop - Main AML parse loop + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2005, R. Byron Moore + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + + +/* + * Parse the AML and build an operation tree as most interpreters, + * like Perl, do. Parsing is done by hand rather than with a YACC + * generated parser to tightly constrain stack and dynamic memory + * usage. At the same time, parsing is kept flexible and the code + * fairly compact by parsing based on a list of AML opcode + * templates in aml_op_info[] + */ + +#include <acpi/acpi.h> +#include <acpi/acparser.h> +#include <acpi/acdispat.h> +#include <acpi/amlcode.h> +#include <acpi/acnamesp.h> +#include <acpi/acinterp.h> + +#define _COMPONENT ACPI_PARSER + ACPI_MODULE_NAME ("psloop") + +static u32 acpi_gbl_depth = 0; + + +/******************************************************************************* + * + * FUNCTION: acpi_ps_parse_loop + * + * PARAMETERS: walk_state - Current state + * + * RETURN: Status + * + * DESCRIPTION: Parse AML (pointed to by the current parser state) and return + * a tree of ops. + * + ******************************************************************************/ + +acpi_status +acpi_ps_parse_loop ( + struct acpi_walk_state *walk_state) +{ + acpi_status status = AE_OK; + acpi_status status2; + union acpi_parse_object *op = NULL; /* current op */ + union acpi_parse_object *arg = NULL; + union acpi_parse_object *pre_op = NULL; + struct acpi_parse_state *parser_state; + u8 *aml_op_start = NULL; + + + ACPI_FUNCTION_TRACE_PTR ("ps_parse_loop", walk_state); + + if (walk_state->descending_callback == NULL) { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + parser_state = &walk_state->parser_state; + walk_state->arg_types = 0; + +#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY)) + + if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) { + /* We are restarting a preempted control method */ + + if (acpi_ps_has_completed_scope (parser_state)) { + /* + * We must check if a predicate to an IF or WHILE statement + * was just completed + */ + if ((parser_state->scope->parse_scope.op) && + ((parser_state->scope->parse_scope.op->common.aml_opcode == AML_IF_OP) || + (parser_state->scope->parse_scope.op->common.aml_opcode == AML_WHILE_OP)) && + (walk_state->control_state) && + (walk_state->control_state->common.state == + ACPI_CONTROL_PREDICATE_EXECUTING)) { + /* + * A predicate was just completed, get the value of the + * predicate and branch based on that value + */ + walk_state->op = NULL; + status = acpi_ds_get_predicate_value (walk_state, ACPI_TO_POINTER (TRUE)); + if (ACPI_FAILURE (status) && + ((status & AE_CODE_MASK) != AE_CODE_CONTROL)) { + if (status == AE_AML_NO_RETURN_VALUE) { + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "Invoked method did not return a value, %s\n", + acpi_format_exception (status))); + + } + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "get_predicate Failed, %s\n", + acpi_format_exception (status))); + return_ACPI_STATUS (status); + } + + status = acpi_ps_next_parse_state (walk_state, op, status); + } + + acpi_ps_pop_scope (parser_state, &op, + &walk_state->arg_types, &walk_state->arg_count); + ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", op)); + } + else if (walk_state->prev_op) { + /* We were in the middle of an op */ + + op = walk_state->prev_op; + walk_state->arg_types = walk_state->prev_arg_types; + } + } +#endif + + /* Iterative parsing loop, while there is more AML to process: */ + + while ((parser_state->aml < parser_state->aml_end) || (op)) { + aml_op_start = parser_state->aml; + if (!op) { + /* Get the next opcode from the AML stream */ + + walk_state->aml_offset = (u32) ACPI_PTR_DIFF (parser_state->aml, + parser_state->aml_start); + walk_state->opcode = acpi_ps_peek_opcode (parser_state); + + /* + * First cut to determine what we have found: + * 1) A valid AML opcode + * 2) A name string + * 3) An unknown/invalid opcode + */ + walk_state->op_info = acpi_ps_get_opcode_info (walk_state->opcode); + switch (walk_state->op_info->class) { + case AML_CLASS_ASCII: + case AML_CLASS_PREFIX: + /* + * Starts with a valid prefix or ASCII char, this is a name + * string. Convert the bare name string to a namepath. + */ + walk_state->opcode = AML_INT_NAMEPATH_OP; + walk_state->arg_types = ARGP_NAMESTRING; + break; + + case AML_CLASS_UNKNOWN: + + /* The opcode is unrecognized. Just skip unknown opcodes */ + + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "Found unknown opcode %X at AML address %p offset %X, ignoring\n", + walk_state->opcode, parser_state->aml, walk_state->aml_offset)); + + ACPI_DUMP_BUFFER (parser_state->aml, 128); + + /* Assume one-byte bad opcode */ + + parser_state->aml++; + continue; + + default: + + /* Found opcode info, this is a normal opcode */ + + parser_state->aml += acpi_ps_get_opcode_size (walk_state->opcode); + walk_state->arg_types = walk_state->op_info->parse_args; + break; + } + + /* Create Op structure and append to parent's argument list */ + + if (walk_state->op_info->flags & AML_NAMED) { + /* Allocate a new pre_op if necessary */ + + if (!pre_op) { + pre_op = acpi_ps_alloc_op (walk_state->opcode); + if (!pre_op) { + status = AE_NO_MEMORY; + goto close_this_op; + } + } + + pre_op->common.value.arg = NULL; + pre_op->common.aml_opcode = walk_state->opcode; + + /* + * Get and append arguments until we find the node that contains + * the name (the type ARGP_NAME). + */ + while (GET_CURRENT_ARG_TYPE (walk_state->arg_types) && + (GET_CURRENT_ARG_TYPE (walk_state->arg_types) != ARGP_NAME)) { + status = acpi_ps_get_next_arg (walk_state, parser_state, + GET_CURRENT_ARG_TYPE (walk_state->arg_types), &arg); + if (ACPI_FAILURE (status)) { + goto close_this_op; + } + + acpi_ps_append_arg (pre_op, arg); + INCREMENT_ARG_LIST (walk_state->arg_types); + } + + /* + * Make sure that we found a NAME and didn't run out of + * arguments + */ + if (!GET_CURRENT_ARG_TYPE (walk_state->arg_types)) { + status = AE_AML_NO_OPERAND; + goto close_this_op; + } + + /* We know that this arg is a name, move to next arg */ + + INCREMENT_ARG_LIST (walk_state->arg_types); + + /* + * Find the object. This will either insert the object into + * the namespace or simply look it up + */ + walk_state->op = NULL; + + status = walk_state->descending_callback (walk_state, &op); + if (ACPI_FAILURE (status)) { + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "During name lookup/catalog, %s\n", + acpi_format_exception (status))); + goto close_this_op; + } + + if (!op) { + continue; + } + + status = acpi_ps_next_parse_state (walk_state, op, status); + if (status == AE_CTRL_PENDING) { + status = AE_OK; + goto close_this_op; + } + + if (ACPI_FAILURE (status)) { + goto close_this_op; + } + + acpi_ps_append_arg (op, pre_op->common.value.arg); + acpi_gbl_depth++; + + if (op->common.aml_opcode == AML_REGION_OP) { + /* + * Defer final parsing of an operation_region body, + * because we don't have enough info in the first pass + * to parse it correctly (i.e., there may be method + * calls within the term_arg elements of the body.) + * + * However, we must continue parsing because + * the opregion is not a standalone package -- + * we don't know where the end is at this point. + * + * (Length is unknown until parse of the body complete) + */ + op->named.data = aml_op_start; + op->named.length = 0; + } + } + else { + /* Not a named opcode, just allocate Op and append to parent */ + + walk_state->op_info = acpi_ps_get_opcode_info (walk_state->opcode); + op = acpi_ps_alloc_op (walk_state->opcode); + if (!op) { + status = AE_NO_MEMORY; + goto close_this_op; + } + + if (walk_state->op_info->flags & AML_CREATE) { + /* + * Backup to beginning of create_xXXfield declaration + * body_length is unknown until we parse the body + */ + op->named.data = aml_op_start; + op->named.length = 0; + } + + acpi_ps_append_arg (acpi_ps_get_parent_scope (parser_state), op); + + if ((walk_state->descending_callback != NULL)) { + /* + * Find the object. This will either insert the object into + * the namespace or simply look it up + */ + walk_state->op = op; + + status = walk_state->descending_callback (walk_state, &op); + status = acpi_ps_next_parse_state (walk_state, op, status); + if (status == AE_CTRL_PENDING) { + status = AE_OK; + goto close_this_op; + } + + if (ACPI_FAILURE (status)) { + goto close_this_op; + } + } + } + + op->common.aml_offset = walk_state->aml_offset; + + if (walk_state->op_info) { + ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, + "Opcode %4.4X [%s] Op %p Aml %p aml_offset %5.5X\n", + (u32) op->common.aml_opcode, walk_state->op_info->name, + op, parser_state->aml, op->common.aml_offset)); + } + } + + + /* + * Start arg_count at zero because we don't know if there are + * any args yet + */ + walk_state->arg_count = 0; + + /* Are there any arguments that must be processed? */ + + if (walk_state->arg_types) { + /* Get arguments */ + + switch (op->common.aml_opcode) { + case AML_BYTE_OP: /* AML_BYTEDATA_ARG */ + case AML_WORD_OP: /* AML_WORDDATA_ARG */ + case AML_DWORD_OP: /* AML_DWORDATA_ARG */ + case AML_QWORD_OP: /* AML_QWORDATA_ARG */ + case AML_STRING_OP: /* AML_ASCIICHARLIST_ARG */ + + /* Fill in constant or string argument directly */ + + acpi_ps_get_next_simple_arg (parser_state, + GET_CURRENT_ARG_TYPE (walk_state->arg_types), op); + break; + + case AML_INT_NAMEPATH_OP: /* AML_NAMESTRING_ARG */ + + status = acpi_ps_get_next_namepath (walk_state, parser_state, op, 1); + if (ACPI_FAILURE (status)) { + goto close_this_op; + } + + walk_state->arg_types = 0; + break; + + default: + /* + * Op is not a constant or string, append each argument + * to the Op + */ + while (GET_CURRENT_ARG_TYPE (walk_state->arg_types) && + !walk_state->arg_count) { + walk_state->aml_offset = (u32) + ACPI_PTR_DIFF (parser_state->aml, parser_state->aml_start); + + status = acpi_ps_get_next_arg (walk_state, parser_state, + GET_CURRENT_ARG_TYPE (walk_state->arg_types), + &arg); + if (ACPI_FAILURE (status)) { + goto close_this_op; + } + + if (arg) { + arg->common.aml_offset = walk_state->aml_offset; + acpi_ps_append_arg (op, arg); + } + INCREMENT_ARG_LIST (walk_state->arg_types); + } + + /* Special processing for certain opcodes */ + + if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS1) && + ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) == 0)) { + /* + * We want to skip If/Else/While constructs during Pass1 + * because we want to actually conditionally execute the + * code during Pass2. + * + * Except for disassembly, where we always want to + * walk the If/Else/While packages + */ + switch (op->common.aml_opcode) { + case AML_IF_OP: + case AML_ELSE_OP: + case AML_WHILE_OP: + + /* Skip body of if/else/while in pass 1 */ + + parser_state->aml = parser_state->pkg_end; + walk_state->arg_count = 0; + break; + + default: + break; + } + } + + switch (op->common.aml_opcode) { + case AML_METHOD_OP: + + /* + * Skip parsing of control method + * because we don't have enough info in the first pass + * to parse it correctly. + * + * Save the length and address of the body + */ + op->named.data = parser_state->aml; + op->named.length = (u32) (parser_state->pkg_end - + parser_state->aml); + + /* Skip body of method */ + + parser_state->aml = parser_state->pkg_end; + walk_state->arg_count = 0; + break; + + case AML_BUFFER_OP: + case AML_PACKAGE_OP: + case AML_VAR_PACKAGE_OP: + + if ((op->common.parent) && + (op->common.parent->common.aml_opcode == AML_NAME_OP) && + (walk_state->pass_number <= ACPI_IMODE_LOAD_PASS2)) { + /* + * Skip parsing of Buffers and Packages + * because we don't have enough info in the first pass + * to parse them correctly. + */ + op->named.data = aml_op_start; + op->named.length = (u32) (parser_state->pkg_end - + aml_op_start); + + /* Skip body */ + + parser_state->aml = parser_state->pkg_end; + walk_state->arg_count = 0; + } + break; + + case AML_WHILE_OP: + + if (walk_state->control_state) { + walk_state->control_state->control.package_end = + parser_state->pkg_end; + } + break; + + default: + + /* No action for all other opcodes */ + break; + } + break; + } + } + + /* Check for arguments that need to be processed */ + + if (walk_state->arg_count) { + /* + * There are arguments (complex ones), push Op and + * prepare for argument + */ + status = acpi_ps_push_scope (parser_state, op, + walk_state->arg_types, walk_state->arg_count); + if (ACPI_FAILURE (status)) { + goto close_this_op; + } + op = NULL; + continue; + } + + /* + * All arguments have been processed -- Op is complete, + * prepare for next + */ + walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode); + if (walk_state->op_info->flags & AML_NAMED) { + if (acpi_gbl_depth) { + acpi_gbl_depth--; + } + + if (op->common.aml_opcode == AML_REGION_OP) { + /* + * Skip parsing of control method or opregion body, + * because we don't have enough info in the first pass + * to parse them correctly. + * + * Completed parsing an op_region declaration, we now + * know the length. + */ + op->named.length = (u32) (parser_state->aml - op->named.data); + } + } + + if (walk_state->op_info->flags & AML_CREATE) { + /* + * Backup to beginning of create_xXXfield declaration (1 for + * Opcode) + * + * body_length is unknown until we parse the body + */ + op->named.length = (u32) (parser_state->aml - op->named.data); + } + + /* This op complete, notify the dispatcher */ + + if (walk_state->ascending_callback != NULL) { + walk_state->op = op; + walk_state->opcode = op->common.aml_opcode; + + status = walk_state->ascending_callback (walk_state); + status = acpi_ps_next_parse_state (walk_state, op, status); + if (status == AE_CTRL_PENDING) { + status = AE_OK; + goto close_this_op; + } + } + + +close_this_op: + /* + * Finished one argument of the containing scope + */ + parser_state->scope->parse_scope.arg_count--; + + /* Finished with pre_op */ + + if (pre_op) { + acpi_ps_free_op (pre_op); + pre_op = NULL; + } + + /* Close this Op (will result in parse subtree deletion) */ + + status2 = acpi_ps_complete_this_op (walk_state, op); + if (ACPI_FAILURE (status2)) { + return_ACPI_STATUS (status2); + } + op = NULL; + + switch (status) { + case AE_OK: + break; + + + case AE_CTRL_TRANSFER: + + /* We are about to transfer to a called method. */ + + walk_state->prev_op = op; + walk_state->prev_arg_types = walk_state->arg_types; + return_ACPI_STATUS (status); + + + case AE_CTRL_END: + + acpi_ps_pop_scope (parser_state, &op, + &walk_state->arg_types, &walk_state->arg_count); + + if (op) { + walk_state->op = op; + walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode); + walk_state->opcode = op->common.aml_opcode; + + status = walk_state->ascending_callback (walk_state); + status = acpi_ps_next_parse_state (walk_state, op, status); + + status2 = acpi_ps_complete_this_op (walk_state, op); + if (ACPI_FAILURE (status2)) { + return_ACPI_STATUS (status2); + } + op = NULL; + } + status = AE_OK; + break; + + + case AE_CTRL_BREAK: + case AE_CTRL_CONTINUE: + + /* Pop off scopes until we find the While */ + + while (!op || (op->common.aml_opcode != AML_WHILE_OP)) { + acpi_ps_pop_scope (parser_state, &op, + &walk_state->arg_types, &walk_state->arg_count); + } + + /* Close this iteration of the While loop */ + + walk_state->op = op; + walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode); + walk_state->opcode = op->common.aml_opcode; + + status = walk_state->ascending_callback (walk_state); + status = acpi_ps_next_parse_state (walk_state, op, status); + + status2 = acpi_ps_complete_this_op (walk_state, op); + if (ACPI_FAILURE (status2)) { + return_ACPI_STATUS (status2); + } + op = NULL; + + status = AE_OK; + break; + + + case AE_CTRL_TERMINATE: + + status = AE_OK; + + /* Clean up */ + do { + if (op) { + status2 = acpi_ps_complete_this_op (walk_state, op); + if (ACPI_FAILURE (status2)) { + return_ACPI_STATUS (status2); + } + } + acpi_ps_pop_scope (parser_state, &op, + &walk_state->arg_types, &walk_state->arg_count); + + } while (op); + + return_ACPI_STATUS (status); + + + default: /* All other non-AE_OK status */ + + do { + if (op) { + status2 = acpi_ps_complete_this_op (walk_state, op); + if (ACPI_FAILURE (status2)) { + return_ACPI_STATUS (status2); + } + } + acpi_ps_pop_scope (parser_state, &op, + &walk_state->arg_types, &walk_state->arg_count); + + } while (op); + + + /* + * TBD: Cleanup parse ops on error + */ +#if 0 + if (op == NULL) { + acpi_ps_pop_scope (parser_state, &op, + &walk_state->arg_types, &walk_state->arg_count); + } +#endif + walk_state->prev_op = op; + walk_state->prev_arg_types = walk_state->arg_types; + return_ACPI_STATUS (status); + } + + /* This scope complete? */ + + if (acpi_ps_has_completed_scope (parser_state)) { + acpi_ps_pop_scope (parser_state, &op, + &walk_state->arg_types, &walk_state->arg_count); + ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", op)); + } + else { + op = NULL; + } + + } /* while parser_state->Aml */ + + + /* + * Complete the last Op (if not completed), and clear the scope stack. + * It is easily possible to end an AML "package" with an unbounded number + * of open scopes (such as when several ASL blocks are closed with + * sequential closing braces). We want to terminate each one cleanly. + */ + ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "AML package complete at Op %p\n", op)); + do { + if (op) { + if (walk_state->ascending_callback != NULL) { + walk_state->op = op; + walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode); + walk_state->opcode = op->common.aml_opcode; + + status = walk_state->ascending_callback (walk_state); + status = acpi_ps_next_parse_state (walk_state, op, status); + if (status == AE_CTRL_PENDING) { + status = AE_OK; + goto close_this_op; + } + + if (status == AE_CTRL_TERMINATE) { + status = AE_OK; + + /* Clean up */ + do { + if (op) { + status2 = acpi_ps_complete_this_op (walk_state, op); + if (ACPI_FAILURE (status2)) { + return_ACPI_STATUS (status2); + } + } + + acpi_ps_pop_scope (parser_state, &op, + &walk_state->arg_types, &walk_state->arg_count); + + } while (op); + + return_ACPI_STATUS (status); + } + + else if (ACPI_FAILURE (status)) { + /* First error is most important */ + + (void) acpi_ps_complete_this_op (walk_state, op); + return_ACPI_STATUS (status); + } + } + + status2 = acpi_ps_complete_this_op (walk_state, op); + if (ACPI_FAILURE (status2)) { + return_ACPI_STATUS (status2); + } + } + + acpi_ps_pop_scope (parser_state, &op, &walk_state->arg_types, + &walk_state->arg_count); + + } while (op); + + return_ACPI_STATUS (status); +} + + |
