diff options
Diffstat (limited to 'drivers/acpi/executer/exfldio.c')
| -rw-r--r-- | drivers/acpi/executer/exfldio.c | 133 |
1 files changed, 87 insertions, 46 deletions
diff --git a/drivers/acpi/executer/exfldio.c b/drivers/acpi/executer/exfldio.c index 9d0f9d2..3c2f89e 100644 --- a/drivers/acpi/executer/exfldio.c +++ b/drivers/acpi/executer/exfldio.c @@ -52,12 +52,31 @@ #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME ("exfldio") +/* Local prototypes */ + +static acpi_status +acpi_ex_field_datum_io ( + union acpi_operand_object *obj_desc, + u32 field_datum_byte_offset, + acpi_integer *value, + u32 read_write); + +static u8 +acpi_ex_register_overflow ( + union acpi_operand_object *obj_desc, + acpi_integer value); + +static acpi_status +acpi_ex_setup_region ( + union acpi_operand_object *obj_desc, + u32 field_datum_byte_offset); + /******************************************************************************* * * FUNCTION: acpi_ex_setup_region * - * PARAMETERS: *obj_desc - Field to be read or written + * PARAMETERS: obj_desc - Field to be read or written * field_datum_byte_offset - Byte offset of this datum within the * parent field * @@ -69,7 +88,7 @@ * ******************************************************************************/ -acpi_status +static acpi_status acpi_ex_setup_region ( union acpi_operand_object *obj_desc, u32 field_datum_byte_offset) @@ -127,9 +146,9 @@ acpi_ex_setup_region ( * length of one field datum (access width) must fit within the region. * (Region length is specified in bytes) */ - if (rgn_desc->region.length < (obj_desc->common_field.base_byte_offset - + field_datum_byte_offset - + obj_desc->common_field.access_byte_width)) { + if (rgn_desc->region.length < (obj_desc->common_field.base_byte_offset + + field_datum_byte_offset + + obj_desc->common_field.access_byte_width)) { if (acpi_gbl_enable_interpreter_slack) { /* * Slack mode only: We will go ahead and allow access to this @@ -155,7 +174,8 @@ acpi_ex_setup_region ( "Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n", acpi_ut_get_node_name (obj_desc->common_field.node), obj_desc->common_field.access_byte_width, - acpi_ut_get_node_name (rgn_desc->region.node), rgn_desc->region.length)); + acpi_ut_get_node_name (rgn_desc->region.node), + rgn_desc->region.length)); } /* @@ -167,7 +187,8 @@ acpi_ex_setup_region ( acpi_ut_get_node_name (obj_desc->common_field.node), obj_desc->common_field.base_byte_offset, field_datum_byte_offset, obj_desc->common_field.access_byte_width, - acpi_ut_get_node_name (rgn_desc->region.node), rgn_desc->region.length)); + acpi_ut_get_node_name (rgn_desc->region.node), + rgn_desc->region.length)); return_ACPI_STATUS (AE_AML_REGION_LIMIT); } @@ -180,10 +201,10 @@ acpi_ex_setup_region ( * * FUNCTION: acpi_ex_access_region * - * PARAMETERS: *obj_desc - Field to be read + * PARAMETERS: obj_desc - Field to be read * field_datum_byte_offset - Byte offset of this datum within the * parent field - * *Value - Where to store value (must at least + * Value - Where to store value (must at least * the size of acpi_integer) * Function - Read or Write flag plus other region- * dependent flags @@ -226,9 +247,9 @@ acpi_ex_access_region ( * 3) The current offset into the field */ rgn_desc = obj_desc->common_field.region_obj; - address = rgn_desc->region.address - + obj_desc->common_field.base_byte_offset - + field_datum_byte_offset; + address = rgn_desc->region.address + + obj_desc->common_field.base_byte_offset + + field_datum_byte_offset; if ((function & ACPI_IO_MASK) == ACPI_READ) { ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "[READ]")); @@ -249,7 +270,8 @@ acpi_ex_access_region ( /* Invoke the appropriate address_space/op_region handler */ status = acpi_ev_address_space_dispatch (rgn_desc, function, - address, ACPI_MUL_8 (obj_desc->common_field.access_byte_width), value); + address, + ACPI_MUL_8 (obj_desc->common_field.access_byte_width), value); if (ACPI_FAILURE (status)) { if (status == AE_NOT_IMPLEMENTED) { @@ -274,7 +296,7 @@ acpi_ex_access_region ( * * FUNCTION: acpi_ex_register_overflow * - * PARAMETERS: *obj_desc - Register(Field) to be written + * PARAMETERS: obj_desc - Register(Field) to be written * Value - Value to be stored * * RETURN: TRUE if value overflows the field, FALSE otherwise @@ -287,7 +309,7 @@ acpi_ex_access_region ( * ******************************************************************************/ -u8 +static u8 acpi_ex_register_overflow ( union acpi_operand_object *obj_desc, acpi_integer value) @@ -319,10 +341,10 @@ acpi_ex_register_overflow ( * * FUNCTION: acpi_ex_field_datum_io * - * PARAMETERS: *obj_desc - Field to be read + * PARAMETERS: obj_desc - Field to be read * field_datum_byte_offset - Byte offset of this datum within the * parent field - * *Value - Where to store value (must be 64 bits) + * Value - Where to store value (must be 64 bits) * read_write - Read or Write flag * * RETURN: Status @@ -333,7 +355,7 @@ acpi_ex_register_overflow ( * ******************************************************************************/ -acpi_status +static acpi_status acpi_ex_field_datum_io ( union acpi_operand_object *obj_desc, u32 field_datum_byte_offset, @@ -350,7 +372,9 @@ acpi_ex_field_datum_io ( if (read_write == ACPI_READ) { if (!value) { local_value = 0; - value = &local_value; /* To support reads without saving return value */ + + /* To support reads without saving return value */ + value = &local_value; } /* Clear the entire return buffer first, [Very Important!] */ @@ -363,8 +387,10 @@ acpi_ex_field_datum_io ( * * buffer_field - Read/write from/to a Buffer * region_field - Read/write from/to a Operation Region. - * bank_field - Write to a Bank Register, then read/write from/to an op_region - * index_field - Write to an Index Register, then read/write from/to a Data Register + * bank_field - Write to a Bank Register, then read/write from/to an + * operation_region + * index_field - Write to an Index Register, then read/write from/to a + * Data Register */ switch (ACPI_GET_OBJECT_TYPE (obj_desc)) { case ACPI_TYPE_BUFFER_FIELD: @@ -384,19 +410,20 @@ acpi_ex_field_datum_io ( * Copy the data from the source buffer. * Length is the field width in bytes. */ - ACPI_MEMCPY (value, (obj_desc->buffer_field.buffer_obj)->buffer.pointer - + obj_desc->buffer_field.base_byte_offset - + field_datum_byte_offset, - obj_desc->common_field.access_byte_width); + ACPI_MEMCPY (value, + (obj_desc->buffer_field.buffer_obj)->buffer.pointer + + obj_desc->buffer_field.base_byte_offset + + field_datum_byte_offset, + obj_desc->common_field.access_byte_width); } else { /* * Copy the data to the target buffer. * Length is the field width in bytes. */ - ACPI_MEMCPY ((obj_desc->buffer_field.buffer_obj)->buffer.pointer - + obj_desc->buffer_field.base_byte_offset - + field_datum_byte_offset, + ACPI_MEMCPY ((obj_desc->buffer_field.buffer_obj)->buffer.pointer + + obj_desc->buffer_field.base_byte_offset + + field_datum_byte_offset, value, obj_desc->common_field.access_byte_width); } @@ -406,8 +433,10 @@ acpi_ex_field_datum_io ( case ACPI_TYPE_LOCAL_BANK_FIELD: - /* Ensure that the bank_value is not beyond the capacity of the register */ - + /* + * Ensure that the bank_value is not beyond the capacity of + * the register + */ if (acpi_ex_register_overflow (obj_desc->bank_field.bank_obj, (acpi_integer) obj_desc->bank_field.value)) { return_ACPI_STATUS (AE_AML_REGISTER_LIMIT); @@ -445,8 +474,10 @@ acpi_ex_field_datum_io ( case ACPI_TYPE_LOCAL_INDEX_FIELD: - /* Ensure that the index_value is not beyond the capacity of the register */ - + /* + * Ensure that the index_value is not beyond the capacity of + * the register + */ if (acpi_ex_register_overflow (obj_desc->index_field.index_obj, (acpi_integer) obj_desc->index_field.value)) { return_ACPI_STATUS (AE_AML_REGISTER_LIMIT); @@ -496,14 +527,16 @@ acpi_ex_field_datum_io ( if (ACPI_SUCCESS (status)) { if (read_write == ACPI_READ) { - ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Value Read %8.8X%8.8X, Width %d\n", - ACPI_FORMAT_UINT64 (*value), - obj_desc->common_field.access_byte_width)); + ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, + "Value Read %8.8X%8.8X, Width %d\n", + ACPI_FORMAT_UINT64 (*value), + obj_desc->common_field.access_byte_width)); } else { - ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Value Written %8.8X%8.8X, Width %d\n", - ACPI_FORMAT_UINT64 (*value), - obj_desc->common_field.access_byte_width)); + ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, + "Value Written %8.8X%8.8X, Width %d\n", + ACPI_FORMAT_UINT64 (*value), + obj_desc->common_field.access_byte_width)); } } @@ -515,8 +548,10 @@ acpi_ex_field_datum_io ( * * FUNCTION: acpi_ex_write_with_update_rule * - * PARAMETERS: *obj_desc - Field to be set - * Value - Value to store + * PARAMETERS: obj_desc - Field to be written + * Mask - bitmask within field datum + * field_value - Value to write + * field_datum_byte_offset - Offset of datum within field * * RETURN: Status * @@ -689,7 +724,8 @@ acpi_ex_extract_from_field ( /* Merge with previous datum if necessary */ merged_datum |= raw_datum << - (obj_desc->common_field.access_bit_width - obj_desc->common_field.start_field_bit_offset); + (obj_desc->common_field.access_bit_width - + obj_desc->common_field.start_field_bit_offset); if (i == datum_count) { break; @@ -707,7 +743,8 @@ acpi_ex_extract_from_field ( /* Mask off any extra bits in the last datum */ - buffer_tail_bits = obj_desc->common_field.bit_length % obj_desc->common_field.access_bit_width; + buffer_tail_bits = obj_desc->common_field.bit_length % + obj_desc->common_field.access_bit_width; if (buffer_tail_bits) { merged_datum &= ACPI_MASK_BITS_ABOVE (buffer_tail_bits); } @@ -791,7 +828,8 @@ acpi_ex_insert_into_field ( /* Write merged datum to the target field */ merged_datum &= mask; - status = acpi_ex_write_with_update_rule (obj_desc, mask, merged_datum, field_offset); + status = acpi_ex_write_with_update_rule (obj_desc, mask, + merged_datum, field_offset); if (ACPI_FAILURE (status)) { return_ACPI_STATUS (status); } @@ -800,7 +838,8 @@ acpi_ex_insert_into_field ( field_offset += obj_desc->common_field.access_byte_width; merged_datum = raw_datum >> - (obj_desc->common_field.access_bit_width - obj_desc->common_field.start_field_bit_offset); + (obj_desc->common_field.access_bit_width - + obj_desc->common_field.start_field_bit_offset); mask = ACPI_INTEGER_MAX; if (i == datum_count) { @@ -819,7 +858,8 @@ acpi_ex_insert_into_field ( /* Mask off any extra bits in the last datum */ buffer_tail_bits = (obj_desc->common_field.bit_length + - obj_desc->common_field.start_field_bit_offset) % obj_desc->common_field.access_bit_width; + obj_desc->common_field.start_field_bit_offset) % + obj_desc->common_field.access_bit_width; if (buffer_tail_bits) { mask &= ACPI_MASK_BITS_ABOVE (buffer_tail_bits); } @@ -827,7 +867,8 @@ acpi_ex_insert_into_field ( /* Write the last datum to the field */ merged_datum &= mask; - status = acpi_ex_write_with_update_rule (obj_desc, mask, merged_datum, field_offset); + status = acpi_ex_write_with_update_rule (obj_desc, + mask, merged_datum, field_offset); return_ACPI_STATUS (status); } |
