diff options
Diffstat (limited to 'drivers/acpi/executer/exfield.c')
| -rw-r--r-- | drivers/acpi/executer/exfield.c | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/drivers/acpi/executer/exfield.c b/drivers/acpi/executer/exfield.c new file mode 100644 index 0000000..be7f212 --- /dev/null +++ b/drivers/acpi/executer/exfield.c @@ -0,0 +1,367 @@ +/****************************************************************************** + * + * Module Name: exfield - ACPI AML (p-code) execution - field manipulation + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2005, R. Byron Moore + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + + +#include <acpi/acpi.h> +#include <acpi/acdispat.h> +#include <acpi/acinterp.h> + + +#define _COMPONENT ACPI_EXECUTER + ACPI_MODULE_NAME ("exfield") + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_read_data_from_field + * + * PARAMETERS: walk_state - Current execution state + * obj_desc - The named field + * ret_buffer_desc - Where the return data object is stored + * + * RETURN: Status + * + * DESCRIPTION: Read from a named field. Returns either an Integer or a + * Buffer, depending on the size of the field. + * + ******************************************************************************/ + +acpi_status +acpi_ex_read_data_from_field ( + struct acpi_walk_state *walk_state, + union acpi_operand_object *obj_desc, + union acpi_operand_object **ret_buffer_desc) +{ + acpi_status status; + union acpi_operand_object *buffer_desc; + acpi_size length; + void *buffer; + u8 locked; + + + ACPI_FUNCTION_TRACE_PTR ("ex_read_data_from_field", obj_desc); + + + /* Parameter validation */ + + if (!obj_desc) { + return_ACPI_STATUS (AE_AML_NO_OPERAND); + } + + if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_BUFFER_FIELD) { + /* + * If the buffer_field arguments have not been previously evaluated, + * evaluate them now and save the results. + */ + if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { + status = acpi_ds_get_buffer_field_arguments (obj_desc); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + } + } + else if ((ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS)) { + /* + * This is an SMBus read. We must create a buffer to hold the data + * and directly access the region handler. + */ + buffer_desc = acpi_ut_create_buffer_object (ACPI_SMBUS_BUFFER_SIZE); + if (!buffer_desc) { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + /* Lock entire transaction if requested */ + + locked = acpi_ex_acquire_global_lock (obj_desc->common_field.field_flags); + + /* + * Perform the read. + * Note: Smbus protocol value is passed in upper 16-bits of Function + */ + status = acpi_ex_access_region (obj_desc, 0, + ACPI_CAST_PTR (acpi_integer, buffer_desc->buffer.pointer), + ACPI_READ | (obj_desc->field.attribute << 16)); + acpi_ex_release_global_lock (locked); + goto exit; + } + + /* + * Allocate a buffer for the contents of the field. + * + * If the field is larger than the size of an acpi_integer, create + * a BUFFER to hold it. Otherwise, use an INTEGER. This allows + * the use of arithmetic operators on the returned value if the + * field size is equal or smaller than an Integer. + * + * Note: Field.length is in bits. + */ + length = (acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES (obj_desc->field.bit_length); + if (length > acpi_gbl_integer_byte_width) { + /* Field is too large for an Integer, create a Buffer instead */ + + buffer_desc = acpi_ut_create_buffer_object (length); + if (!buffer_desc) { + return_ACPI_STATUS (AE_NO_MEMORY); + } + buffer = buffer_desc->buffer.pointer; + } + else { + /* Field will fit within an Integer (normal case) */ + + buffer_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER); + if (!buffer_desc) { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + length = acpi_gbl_integer_byte_width; + buffer_desc->integer.value = 0; + buffer = &buffer_desc->integer.value; + } + + ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, + "field_read [TO]: Obj %p, Type %X, Buf %p, byte_len %X\n", + obj_desc, ACPI_GET_OBJECT_TYPE (obj_desc), buffer, (u32) length)); + ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, + "field_read [FROM]: bit_len %X, bit_off %X, byte_off %X\n", + obj_desc->common_field.bit_length, + obj_desc->common_field.start_field_bit_offset, + obj_desc->common_field.base_byte_offset)); + + /* Lock entire transaction if requested */ + + locked = acpi_ex_acquire_global_lock (obj_desc->common_field.field_flags); + + /* Read from the field */ + + status = acpi_ex_extract_from_field (obj_desc, buffer, (u32) length); + acpi_ex_release_global_lock (locked); + + +exit: + if (ACPI_FAILURE (status)) { + acpi_ut_remove_reference (buffer_desc); + } + else if (ret_buffer_desc) { + *ret_buffer_desc = buffer_desc; + } + + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_write_data_to_field + * + * PARAMETERS: source_desc - Contains data to write + * obj_desc - The named field + * + * RETURN: Status + * + * DESCRIPTION: Write to a named field + * + ******************************************************************************/ + +acpi_status +acpi_ex_write_data_to_field ( + union acpi_operand_object *source_desc, + union acpi_operand_object *obj_desc, + union acpi_operand_object **result_desc) +{ + acpi_status status; + u32 length; + u32 required_length; + void *buffer; + void *new_buffer; + u8 locked; + union acpi_operand_object *buffer_desc; + + + ACPI_FUNCTION_TRACE_PTR ("ex_write_data_to_field", obj_desc); + + + /* Parameter validation */ + + if (!source_desc || !obj_desc) { + return_ACPI_STATUS (AE_AML_NO_OPERAND); + } + + if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_BUFFER_FIELD) { + /* + * If the buffer_field arguments have not been previously evaluated, + * evaluate them now and save the results. + */ + if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { + status = acpi_ds_get_buffer_field_arguments (obj_desc); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + } + } + else if ((ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS)) { + /* + * This is an SMBus write. We will bypass the entire field mechanism + * and handoff the buffer directly to the handler. + * + * Source must be a buffer of sufficient size (ACPI_SMBUS_BUFFER_SIZE). + */ + if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_BUFFER) { + ACPI_REPORT_ERROR (("SMBus write requires Buffer, found type %s\n", + acpi_ut_get_object_type_name (source_desc))); + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + + if (source_desc->buffer.length < ACPI_SMBUS_BUFFER_SIZE) { + ACPI_REPORT_ERROR (("SMBus write requires Buffer of length %X, found length %X\n", + ACPI_SMBUS_BUFFER_SIZE, source_desc->buffer.length)); + return_ACPI_STATUS (AE_AML_BUFFER_LIMIT); + } + + buffer_desc = acpi_ut_create_buffer_object (ACPI_SMBUS_BUFFER_SIZE); + if (!buffer_desc) { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + buffer = buffer_desc->buffer.pointer; + ACPI_MEMCPY (buffer, source_desc->buffer.pointer, ACPI_SMBUS_BUFFER_SIZE); + + /* Lock entire transaction if requested */ + + locked = acpi_ex_acquire_global_lock (obj_desc->common_field.field_flags); + + /* + * Perform the write (returns status and perhaps data in the same buffer) + * Note: SMBus protocol type is passed in upper 16-bits of Function. + */ + status = acpi_ex_access_region (obj_desc, 0, + (acpi_integer *) buffer, + ACPI_WRITE | (obj_desc->field.attribute << 16)); + acpi_ex_release_global_lock (locked); + + *result_desc = buffer_desc; + return_ACPI_STATUS (status); + } + + /* + * Get a pointer to the data to be written + */ + switch (ACPI_GET_OBJECT_TYPE (source_desc)) { + case ACPI_TYPE_INTEGER: + buffer = &source_desc->integer.value; + length = sizeof (source_desc->integer.value); + break; + + case ACPI_TYPE_BUFFER: + buffer = source_desc->buffer.pointer; + length = source_desc->buffer.length; + break; + + case ACPI_TYPE_STRING: + buffer = source_desc->string.pointer; + length = source_desc->string.length; + break; + + default: + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + + /* + * We must have a buffer that is at least as long as the field + * we are writing to. This is because individual fields are + * indivisible and partial writes are not supported -- as per + * the ACPI specification. + */ + new_buffer = NULL; + required_length = ACPI_ROUND_BITS_UP_TO_BYTES (obj_desc->common_field.bit_length); + + if (length < required_length) { + /* We need to create a new buffer */ + + new_buffer = ACPI_MEM_CALLOCATE (required_length); + if (!new_buffer) { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + /* + * Copy the original data to the new buffer, starting + * at Byte zero. All unused (upper) bytes of the + * buffer will be 0. + */ + ACPI_MEMCPY ((char *) new_buffer, (char *) buffer, length); + buffer = new_buffer; + length = required_length; + } + + ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, + "field_write [FROM]: Obj %p (%s:%X), Buf %p, byte_len %X\n", + source_desc, acpi_ut_get_type_name (ACPI_GET_OBJECT_TYPE (source_desc)), + ACPI_GET_OBJECT_TYPE (source_desc), buffer, length)); + ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, + "field_write [TO]: Obj %p (%s:%X), bit_len %X, bit_off %X, byte_off %X\n", + obj_desc, acpi_ut_get_type_name (ACPI_GET_OBJECT_TYPE (obj_desc)), + ACPI_GET_OBJECT_TYPE (obj_desc), + obj_desc->common_field.bit_length, + obj_desc->common_field.start_field_bit_offset, + obj_desc->common_field.base_byte_offset)); + + /* Lock entire transaction if requested */ + + locked = acpi_ex_acquire_global_lock (obj_desc->common_field.field_flags); + + /* Write to the field */ + + status = acpi_ex_insert_into_field (obj_desc, buffer, length); + acpi_ex_release_global_lock (locked); + + /* Free temporary buffer if we used one */ + + if (new_buffer) { + ACPI_MEM_FREE (new_buffer); + } + + return_ACPI_STATUS (status); +} + + |
