diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/alpha/kernel/osf_sys.c | 20 | ||||
-rw-r--r-- | arch/arm/boot/dts/armada-370-xp.dtsi | 6 | ||||
-rw-r--r-- | arch/arm/configs/pxa910_defconfig | 8 | ||||
-rw-r--r-- | arch/arm/mach-mmp/include/mach/pxa910.h | 5 | ||||
-rw-r--r-- | arch/arm/mach-mmp/pxa910.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-mmp/ttc_dkb.c | 92 | ||||
-rw-r--r-- | arch/cris/include/uapi/asm/posix_types.h | 5 | ||||
-rw-r--r-- | arch/mn10300/unit-asb2305/pci-irq.c | 2 | ||||
-rw-r--r-- | arch/tile/Kconfig | 6 |
9 files changed, 123 insertions, 24 deletions
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index dbc1760..b9e37ad 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1300,17 +1300,15 @@ static unsigned long arch_get_unmapped_area_1(unsigned long addr, unsigned long len, unsigned long limit) { - struct vm_area_struct *vma = find_vma(current->mm, addr); - - while (1) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (limit - len < addr) - return -ENOMEM; - if (!vma || addr + len <= vma->vm_start) - return addr; - addr = vma->vm_end; - vma = vma->vm_next; - } + struct vm_unmapped_area_info info; + + info.flags = 0; + info.length = len; + info.low_limit = addr; + info.high_limit = limit; + info.align_mask = 0; + info.align_offset = 0; + return vm_unmapped_area(&info); } unsigned long diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 4c0abe8..5b29225 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -131,6 +131,12 @@ clocks = <&coreclk 0>; status = "disabled"; }; + + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0xd0010300 0x20>; + interrupts = <50>; + }; }; }; diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 191118c..3bb7771 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -42,6 +42,14 @@ CONFIG_SMC91X=y # CONFIG_SERIO is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SPI=y +CONFIG_FB=y +CONFIG_MMP_DISP=y +CONFIG_MMP_DISP_CONTROLLER=y +CONFIG_MMP_SPI=y +CONFIG_MMP_PANEL_TPOHVGA=y +CONFIG_MMP_FB=y +CONFIG_LOGO=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index eff31ab6..b914afa 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -8,6 +8,7 @@ extern void __init pxa910_init_irq(void); #include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include <video/mmp_disp.h> extern struct pxa_device_desc pxa910_device_uart1; extern struct pxa_device_desc pxa910_device_uart2; @@ -21,7 +22,9 @@ extern struct pxa_device_desc pxa910_device_nand; extern struct platform_device pxa168_device_u2o; extern struct platform_device pxa168_device_u2ootg; extern struct platform_device pxa168_device_u2oehci; - +extern struct pxa_device_desc pxa910_device_disp; +extern struct pxa_device_desc pxa910_device_fb; +extern struct pxa_device_desc pxa910_device_panel; extern struct platform_device pxa910_device_gpio; extern struct platform_device pxa910_device_rtc; diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index c6a89f1..36cb321 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -134,6 +134,9 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); +PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec); +PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0); +PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0); struct resource pxa910_resource_gpio[] = { { diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 6e47490..22a9058 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/mfd/88pm860x.h> #include <linux/platform_data/mv_usb.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -184,6 +186,92 @@ static struct pxa3xx_nand_platform_data dkb_nand_info = { }; #endif +#ifdef CONFIG_MMP_DISP +/* path config */ +#define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */ +#define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */ +/* link config */ +#define CFG_DUMBMODE(mode) (mode << 28) /* 0x0 ~ 0x6*/ +#define CFG_GRA_SWAPRB(x) (x << 0) /* 1: rbswap enabled */ +static struct mmp_mach_path_config dkb_disp_config[] = { + [0] = { + .name = "mmp-parallel", + .overlay_num = 2, + .output_type = PATH_OUT_PARALLEL, + .path_config = CFG_IOPADMODE(0x1) + | SCLK_SOURCE_SELECT(0x1), + .link_config = CFG_DUMBMODE(0x2) + | CFG_GRA_SWAPRB(0x1), + }, +}; + +static struct mmp_mach_plat_info dkb_disp_info = { + .name = "mmp-disp", + .clk_name = "disp0", + .path_num = 1, + .paths = dkb_disp_config, +}; + +static struct mmp_buffer_driver_mach_info dkb_fb_info = { + .name = "mmp-fb", + .path_name = "mmp-parallel", + .overlay_id = 0, + .dmafetch_id = 1, + .default_pixfmt = PIXFMT_RGB565, +}; + +static void dkb_tpo_panel_power(int on) +{ + int err; + u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106); + + if (on) { + err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET"); + if (err) { + pr_err("failed to request GPIO for TPO LCD RESET\n"); + return; + } + gpio_direction_output(spi_reset, 0); + udelay(100); + gpio_set_value(spi_reset, 1); + gpio_free(spi_reset); + } else { + err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET"); + if (err) { + pr_err("failed to request LCD RESET gpio\n"); + return; + } + gpio_set_value(spi_reset, 0); + gpio_free(spi_reset); + } +} + +static struct mmp_mach_panel_info dkb_tpo_panel_info = { + .name = "tpo-hvga", + .plat_path_name = "mmp-parallel", + .plat_set_onoff = dkb_tpo_panel_power, +}; + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "tpo-hvga", + .platform_data = &dkb_tpo_panel_info, + .bus_num = 5, + } +}; + +static void __init add_disp(void) +{ + pxa_register_device(&pxa910_device_disp, + &dkb_disp_info, sizeof(dkb_disp_info)); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + pxa_register_device(&pxa910_device_fb, + &dkb_fb_info, sizeof(dkb_fb_info)); + pxa_register_device(&pxa910_device_panel, + &dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info)); +} +#endif + static void __init ttc_dkb_init(void) { mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config)); @@ -212,6 +300,10 @@ static void __init ttc_dkb_init(void) pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2ootg); #endif + +#ifdef CONFIG_MMP_DISP + add_disp(); +#endif } MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") diff --git a/arch/cris/include/uapi/asm/posix_types.h b/arch/cris/include/uapi/asm/posix_types.h index ce4e517..0f22e6a 100644 --- a/arch/cris/include/uapi/asm/posix_types.h +++ b/arch/cris/include/uapi/asm/posix_types.h @@ -22,11 +22,6 @@ typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; #define __kernel_uid_t __kernel_uid_t -typedef __SIZE_TYPE__ __kernel_size_t; -typedef long __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -#define __kernel_size_t __kernel_size_t - typedef unsigned short __kernel_old_dev_t; #define __kernel_old_dev_t __kernel_old_dev_t diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c index 91212ea..77439da 100644 --- a/arch/mn10300/unit-asb2305/pci-irq.c +++ b/arch/mn10300/unit-asb2305/pci-irq.c @@ -29,7 +29,7 @@ void __init pcibios_fixup_irqs(void) struct pci_dev *dev = NULL; u8 line, pin; - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + for_each_pci_dev(dev) { pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (pin) { dev->irq = XIRQ1; diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 36136e8..4ce6e4c 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -413,12 +413,6 @@ config TILE_USB Provides USB host adapter support for the built-in EHCI and OHCI interfaces on TILE-Gx chips. -# USB OHCI needs the bounce pool since tilegx will often have more -# than 4GB of memory, but we don't currently use the IOTLB to present -# a 32-bit address to OHCI. So we need to use a bounce pool instead. -config NEED_BOUNCE_POOL - def_bool USB_OHCI_HCD - source "drivers/pci/hotplug/Kconfig" endmenu |