diff options
Diffstat (limited to 'arch')
31 files changed, 408 insertions, 106 deletions
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c index 30f5d10..a325d57 100644 --- a/arch/frv/mm/fault.c +++ b/arch/frv/mm/fault.c @@ -257,10 +257,10 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear */ out_of_memory: up_read(&mm->mmap_sem); - printk("VM: killing process %s\n", current->comm); - if (user_mode(__frame)) - do_group_exit(SIGKILL); - goto no_context; + if (!user_mode(__frame)) + goto no_context; + pagefault_out_of_memory(); + return; do_sigbus: up_read(&mm->mmap_sem); diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index 28ee389..b8ec002 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -188,7 +188,6 @@ good_area: if ((error_code & ACE_INSTRUCTION) && !(vma->vm_flags & VM_EXEC)) goto bad_area; -survive: /* * If for any reason at all we couldn't handle the fault, * make sure we exit gracefully rather than endlessly redo @@ -271,15 +270,10 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if (is_global_init(tsk)) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } - printk("VM: killing process %s\n", tsk->comm); - if (error_code & ACE_USERMODE) - do_group_exit(SIGKILL); - goto no_context; + if (!(error_code & ACE_USERMODE)) + goto no_context; + pagefault_out_of_memory(); + return; do_sigbus: up_read(&mm->mmap_sem); diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 53bb17d..81f153f 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -338,11 +338,10 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - monitor_signal(regs); - printk(KERN_ALERT "VM: killing process %s\n", tsk->comm); - if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) - do_exit(SIGKILL); - goto no_context; + if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR) + goto no_context; + pagefault_out_of_memory(); + return; do_sigbus: up_read(&mm->mmap_sem); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index c5ee4ce..573fca1 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -9,7 +9,7 @@ config SUPERH def_bool y select EMBEDDED select HAVE_CLK - select HAVE_IDE + select HAVE_IDE if HAS_IOPORT select HAVE_LMB select HAVE_OPROFILE select HAVE_GENERIC_DMA_COHERENT @@ -174,6 +174,9 @@ config ARCH_HAS_DEFAULT_IDLE config ARCH_HAS_CPU_IDLE_WAIT def_bool y +config NO_IOPORT + bool + config IO_TRAPPED bool @@ -776,6 +779,17 @@ config ENTRY_OFFSET default "0x00010000" if PAGE_SIZE_64KB default "0x00000000" +config ROMIMAGE_MMCIF + bool "Include MMCIF loader in romImage (EXPERIMENTAL)" + depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL + help + Say Y here to include experimental MMCIF loading code in + romImage. With this enabled it is possible to write the romImage + kernel image to an MMC card and boot the kernel straight from + the reset vector. At reset the processor Mask ROM will load the + first part of the romImage which in turn loads the rest the kernel + image to RAM using the MMCIF hardware block. + choice prompt "Kernel command line" optional diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 938e87d..07b35ca 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -154,6 +154,7 @@ config SH_SDK7786 bool "SDK7786" depends on CPU_SUBTYPE_SH7786 select SYS_SUPPORTS_PCI + select NO_IOPORT if !PCI help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. @@ -190,6 +191,7 @@ config SH_URQUELL depends on CPU_SUBTYPE_SH7786 select ARCH_REQUIRE_GPIOLIB select SYS_SUPPORTS_PCI + select NO_IOPORT if !PCI config SH_MIGOR bool "Migo-R" @@ -286,6 +288,7 @@ config SH_LBOX_RE2 config SH_X3PROTO bool "SH-X3 Prototype board" depends on CPU_SUBTYPE_SHX3 + select NO_IOPORT if !PCI config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 57e37e2..3a170bd 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -328,7 +328,7 @@ static struct soc_camera_platform_info camera_info = { .set_capture = camera_set_capture, }; -struct soc_camera_link camera_link = { +static struct soc_camera_link camera_link = { .bus_id = 0, .add_device = ap325rxa_camera_add, .del_device = ap325rxa_camera_del, diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 4971425..be1d114 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -12,6 +12,8 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> #include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/interrupt.h> @@ -26,7 +28,6 @@ #include <linux/mmc/host.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> -#include <linux/mfd/sh_mobile_sdhi.h> #include <video/sh_mobile_lcdc.h> #include <sound/sh_fsi.h> #include <media/sh_mobile_ceu.h> @@ -139,7 +140,7 @@ static struct resource sh_eth_resources[] = { }, }; -struct sh_eth_plat_data sh_eth_plat = { +static struct sh_eth_plat_data sh_eth_plat = { .phy = 0x1f, /* SMSC LAN8700 */ .edmac_endian = EDMAC_LITTLE_ENDIAN, .ether_link_active_low = 1 @@ -159,7 +160,7 @@ static struct platform_device sh_eth_device = { }; /* USB0 host */ -void usb0_port_power(int port, int power) +static void usb0_port_power(int port, int power) { gpio_set_value(GPIO_PTB4, power); } @@ -195,7 +196,7 @@ static struct platform_device usb0_host_device = { }; /* USB1 host/function */ -void usb1_port_power(int port, int power) +static void usb1_port_power(int port, int power) { gpio_set_value(GPIO_PTB5, power); } @@ -421,7 +422,7 @@ static int ts_init(void) return 0; } -struct tsc2007_platform_data tsc2007_info = { +static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, .get_pendown_state = ts_get_pendown_state, @@ -436,7 +437,7 @@ static struct i2c_board_info ts_i2c_clients = { }; #ifdef CONFIG_MFD_SH_MOBILE_SDHI -/* SHDI0 */ +/* SDHI0 */ static void sdhi0_set_pwr(struct platform_device *pdev, int state) { gpio_set_value(GPIO_PTB6, state); @@ -474,7 +475,8 @@ static struct platform_device sdhi0_device = { }, }; -/* SHDI1 */ +#if !defined(CONFIG_MMC_SH_MMCIF) +/* SDHI1 */ static void sdhi1_set_pwr(struct platform_device *pdev, int state) { gpio_set_value(GPIO_PTB7, state); @@ -511,6 +513,7 @@ static struct platform_device sdhi1_device = { .hwblk_id = HWBLK_SDHI1, }, }; +#endif /* CONFIG_MMC_SH_MMCIF */ #else @@ -720,7 +723,7 @@ static struct clk fsimckb_clk = { .rate = 0, /* unknown */ }; -struct sh_fsi_platform_info fsi_info = { +static struct sh_fsi_platform_info fsi_info = { .portb_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | SH_FSI_IN_SLAVE_MODE | @@ -777,7 +780,7 @@ static struct platform_device irda_device = { #include <media/ak881x.h> #include <media/sh_vou.h> -struct ak881x_pdata ak881x_pdata = { +static struct ak881x_pdata ak881x_pdata = { .flags = AK881X_IF_MODE_SLAVE, }; @@ -786,7 +789,7 @@ static struct i2c_board_info ak8813 = { .platform_data = &ak881x_pdata, }; -struct sh_vou_pdata sh_vou_pdata = { +static struct sh_vou_pdata sh_vou_pdata = { .bus_fmt = SH_VOU_BUS_8BIT, .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, .board_info = &ak8813, @@ -819,6 +822,58 @@ static struct platform_device vou_device = { }, }; +#if defined(CONFIG_MMC_SH_MMCIF) +/* SH_MMCIF */ +static void mmcif_set_pwr(struct platform_device *pdev, int state) +{ + gpio_set_value(GPIO_PTB7, state); +} + +static void mmcif_down_pwr(struct platform_device *pdev) +{ + gpio_set_value(GPIO_PTB7, 0); +} + +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "SH_MMCIF", + .start = 0xA4CA0000, + .end = 0xA4CA00FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* MMC2I */ + .start = 29, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* MMC3I */ + .start = 30, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .set_pwr = mmcif_set_pwr, + .down_pwr = mmcif_down_pwr, + .sup_pclk = 0, /* SH7724: Max Pclk/2 */ + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NEEDS_POLL, + .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct platform_device sh_mmcif_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .platform_data = &sh_mmcif_plat, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; +#endif + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, @@ -831,7 +886,9 @@ static struct platform_device *ecovec_devices[] __initdata = { &keysc_device, #ifdef CONFIG_MFD_SH_MOBILE_SDHI &sdhi0_device, +#if !defined(CONFIG_MMC_SH_MMCIF) &sdhi1_device, +#endif #else &msiof0_device, #endif @@ -841,6 +898,9 @@ static struct platform_device *ecovec_devices[] __initdata = { &fsi_device, &irda_device, &vou_device, +#if defined(CONFIG_MMC_SH_MMCIF) + &sh_mmcif_device, +#endif }; #ifdef CONFIG_I2C @@ -1134,6 +1194,7 @@ static int __init arch_setup(void) gpio_request(GPIO_PTB6, NULL); gpio_direction_output(GPIO_PTB6, 0); +#if !defined(CONFIG_MMC_SH_MMCIF) /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */ gpio_request(GPIO_FN_SDHI1CD, NULL); gpio_request(GPIO_FN_SDHI1WP, NULL); @@ -1148,6 +1209,7 @@ static int __init arch_setup(void) /* I/O buffer drive ability is high for SDHI1 */ __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); +#endif /* CONFIG_MMC_SH_MMCIF */ #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1223,6 +1285,25 @@ static int __init arch_setup(void) gpio_request(GPIO_PTU5, NULL); gpio_direction_output(GPIO_PTU5, 0); +#if defined(CONFIG_MMC_SH_MMCIF) + /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */ + gpio_request(GPIO_FN_MMC_D7, NULL); + gpio_request(GPIO_FN_MMC_D6, NULL); + gpio_request(GPIO_FN_MMC_D5, NULL); + gpio_request(GPIO_FN_MMC_D4, NULL); + gpio_request(GPIO_FN_MMC_D3, NULL); + gpio_request(GPIO_FN_MMC_D2, NULL); + gpio_request(GPIO_FN_MMC_D1, NULL); + gpio_request(GPIO_FN_MMC_D0, NULL); + gpio_request(GPIO_FN_MMC_CLK, NULL); + gpio_request(GPIO_FN_MMC_CMD, NULL); + gpio_request(GPIO_PTB7, NULL); + gpio_direction_output(GPIO_PTB7, 0); + + /* I/O buffer drive ability is high for MMCIF */ + __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); +#endif + /* enable I2C device */ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 87185de..662debe 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -181,7 +181,7 @@ static int migor_nand_flash_ready(struct mtd_info *mtd) return gpio_get_value(GPIO_PTA1); /* NAND_RBn */ } -struct platform_nand_data migor_nand_flash_data = { +static struct platform_nand_data migor_nand_flash_data = { .chip = { .nr_chips = 1, .partitions = migor_nand_flash_partitions, diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index f9b8254..552ebd9 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -283,7 +283,7 @@ static struct clk fsimcka_clk = { }; /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ -struct sh_fsi_platform_info fsi_info = { +static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | SH_FSI_IN_SLAVE_MODE | @@ -371,7 +371,7 @@ static struct resource sh_eth_resources[] = { }, }; -struct sh_eth_plat_data sh_eth_plat = { +static struct sh_eth_plat_data sh_eth_plat = { .phy = 0x1f, /* SMSC LAN8187 */ .edmac_endian = EDMAC_LITTLE_ENDIAN, }; @@ -535,7 +535,7 @@ static struct platform_device irda_device = { #include <media/ak881x.h> #include <media/sh_vou.h> -struct ak881x_pdata ak881x_pdata = { +static struct ak881x_pdata ak881x_pdata = { .flags = AK881X_IF_MODE_SLAVE, }; @@ -545,7 +545,7 @@ static struct i2c_board_info ak8813 = { .platform_data = &ak881x_pdata, }; -struct sh_vou_pdata sh_vou_pdata = { +static struct sh_vou_pdata sh_vou_pdata = { .bus_fmt = SH_VOU_BUS_8BIT, .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, .board_info = &ak8813, diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile index f473a24..2216ee5 100644 --- a/arch/sh/boot/romimage/Makefile +++ b/arch/sh/boot/romimage/Makefile @@ -1,16 +1,21 @@ # # linux/arch/sh/boot/romimage/Makefile # -# create an image suitable for burning to flash from zImage +# create an romImage file suitable for burning to flash/mmc from zImage # targets := vmlinux head.o zeropage.bin piggy.o +load-y := 0 -OBJECTS = $(obj)/head.o -LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \ +mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724) := 0xe5200000 # ILRAM +mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724) := $(obj)/mmcif-sh7724.o +load-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-load-y) +obj-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-obj-y) + +LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \ -T $(obj)/../../kernel/vmlinux.lds -$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE +$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE $(call if_changed,ld) @: diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S index 93e779a..4671d1b 100644 --- a/arch/sh/boot/romimage/head.S +++ b/arch/sh/boot/romimage/head.S @@ -12,8 +12,40 @@ romstart: /* include board specific setup code */ #include <mach/romimage.h> +#ifdef CONFIG_ROMIMAGE_MMCIF + /* load the romImage to above the empty zero page */ + mov.l empty_zero_page_dst, r4 + mov.l empty_zero_page_dst_adj, r5 + add r5, r4 + mov.l bytes_to_load, r5 + mov.l loader_function, r7 + jsr @r7 + mov r4, r15 + + mov.l empty_zero_page_dst, r4 + mov.l empty_zero_page_dst_adj, r5 + add r5, r4 + mov.l loaded_code_offs, r5 + add r5, r4 + jmp @r4 + nop + + .balign 4 +empty_zero_page_dst_adj: + .long PAGE_SIZE +bytes_to_load: + .long end_data - romstart +loader_function: + .long mmcif_loader +loaded_code_offs: + .long loaded_code - romstart +loaded_code: +#endif /* CONFIG_ROMIMAGE_MMCIF */ + /* copy the empty_zero_page contents to where vmlinux expects it */ - mova empty_zero_page_src, r0 + mova extra_data_pos, r0 + mov.l extra_data_size, r1 + add r1, r0 mov.l empty_zero_page_dst, r1 mov #(PAGE_SHIFT - 4), r4 mov #1, r3 @@ -37,7 +69,9 @@ romstart: mov #PAGE_SHIFT, r4 mov #1, r1 shld r4, r1 - mova empty_zero_page_src, r0 + mova extra_data_pos, r0 + add r1, r0 + mov.l extra_data_size, r1 add r1, r0 jmp @r0 nop @@ -45,4 +79,6 @@ romstart: .align 2 empty_zero_page_dst: .long _text -empty_zero_page_src: +extra_data_pos: +extra_data_size: + .long zero_page_pos - extra_data_pos diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c new file mode 100644 index 0000000..14863d7 --- /dev/null +++ b/arch/sh/boot/romimage/mmcif-sh7724.c @@ -0,0 +1,72 @@ +/* + * sh7724 MMCIF loader + * + * Copyright (C) 2010 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/mmc/sh_mmcif.h> +#include <mach/romimage.h> + +#define MMCIF_BASE (void __iomem *)0xa4ca0000 + +#define MSTPCR2 0xa4150038 +#define PTWCR 0xa4050146 +#define PTXCR 0xa4050148 +#define PSELA 0xa405014e +#define PSELE 0xa4050156 +#define HIZCRC 0xa405015c +#define DRVCRA 0xa405018a + +enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT, + MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE }; + +/* SH7724 specific MMCIF loader + * + * loads the romImage from an MMC card starting from block 512 + * use the following line to write the romImage to an MMC card + * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512 + */ +asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes) +{ + mmcif_update_progress(MMCIF_PROGRESS_ENTER); + + /* enable clock to the MMCIF hardware block */ + __raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2); + + /* setup pins D7-D0 */ + __raw_writew(0x0000, PTWCR); + + /* setup pins MMC_CLK, MMC_CMD */ + __raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR); + + /* select D3-D0 pin function */ + __raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA); + + /* select D7-D4 pin function */ + __raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE); + + /* disable Hi-Z for the MMC pins */ + __raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC); + + /* high drive capability for MMC pins */ + __raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA); + + mmcif_update_progress(MMCIF_PROGRESS_INIT); + + /* setup MMCIF hardware */ + sh_mmcif_boot_init(MMCIF_BASE); + + mmcif_update_progress(MMCIF_PROGRESS_LOAD); + + /* load kernel via MMCIF interface */ + sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes); + + /* disable clock to the MMCIF hardware block */ + __raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2); + + mmcif_update_progress(MMCIF_PROGRESS_DONE); +} diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr index 287c08f..590394e 100644 --- a/arch/sh/boot/romimage/vmlinux.scr +++ b/arch/sh/boot/romimage/vmlinux.scr @@ -1,6 +1,8 @@ SECTIONS { .text : { + zero_page_pos = .; *(.data) + end_data = .; } } diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index f689554..b237d52 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -39,6 +39,8 @@ #include <asm/io_generic.h> #include <asm/io_trapped.h> +#ifdef CONFIG_HAS_IOPORT + #define inb(p) sh_mv.mv_inb((p)) #define inw(p) sh_mv.mv_inw((p)) #define inl(p) sh_mv.mv_inl((p)) @@ -60,6 +62,8 @@ #define outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) #define outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) +#endif + #define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v)) #define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v)) #define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v)) @@ -240,6 +244,8 @@ __BUILD_MEMORY_STRING(q, u64) #define IO_SPACE_LIMIT 0xffffffff +#ifdef CONFIG_HAS_IOPORT + /* * This function provides a method for the generic case where a * board-specific ioport_map simply needs to return the port + some @@ -255,6 +261,8 @@ static inline void __set_io_port_base(unsigned long pbase) #define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) +#endif + /* We really want to try and get these to memcpy etc */ void memcpy_fromio(void *, const volatile void __iomem *, unsigned long); void memcpy_toio(volatile void __iomem *, const void *, unsigned long); diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h index bc0218c..a0b0cf7 100644 --- a/arch/sh/include/asm/machvec.h +++ b/arch/sh/include/asm/machvec.h @@ -19,6 +19,10 @@ struct sh_machine_vector { const char *mv_name; int mv_nr_irqs; + int (*mv_irq_demux)(int irq); + void (*mv_init_irq)(void); + +#ifdef CONFIG_HAS_IOPORT u8 (*mv_inb)(unsigned long); u16 (*mv_inw)(unsigned long); u32 (*mv_inl)(unsigned long); @@ -40,12 +44,9 @@ struct sh_machine_vector { void (*mv_outsw)(unsigned long, const void *src, unsigned long count); void (*mv_outsl)(unsigned long, const void *src, unsigned long count); - int (*mv_irq_demux)(int irq); - - void (*mv_init_irq)(void); - void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); void (*mv_ioport_unmap)(void __iomem *); +#endif int (*mv_clk_init)(void); int (*mv_mode_pins)(void); diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index fbbf550..4c27b68 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -9,6 +9,7 @@ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10] * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3] * MD8: Test Mode + * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0) */ /* Pin Function Controller: diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h index 267e241..08fb422 100644 --- a/arch/sh/include/mach-common/mach/romimage.h +++ b/arch/sh/include/mach-common/mach/romimage.h @@ -1 +1,11 @@ +#ifdef __ASSEMBLY__ + /* do nothing here by default */ + +#else /* __ASSEMBLY__ */ + +extern inline void mmcif_update_progress(int nr) +{ +} + +#endif /* __ASSEMBLY__ */ diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h index 1c8787e..1dcf5e6 100644 --- a/arch/sh/include/mach-ecovec24/mach/romimage.h +++ b/arch/sh/include/mach-ecovec24/mach/romimage.h @@ -1,3 +1,5 @@ +#ifdef __ASSEMBLY__ + /* EcoVec board specific boot code: * converts the "partner-jet-script.txt" script into assembly * the assembly code is the first code to be executed in the romImage @@ -18,3 +20,28 @@ .align 2 1 : .long 0xa8000000 2 : + +#else /* __ASSEMBLY__ */ + +/* Ecovec board specific information: + * + * Set the following to enable MMCIF boot from the MMC card in CN12: + * + * DS1.5 = OFF (SH BOOT pin set to L) + * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1) + * DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1) + * + */ +#define HIZCRA 0xa4050158 +#define PGDR 0xa405012c + +extern inline void mmcif_update_progress(int nr) +{ + /* disable Hi-Z for LED pins */ + __raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA); + + /* update progress on LED4, LED5, LED6 and LED7 */ + __raw_writeb(1 << (nr - 1), PGDR); +} + +#endif /* __ASSEMBLY__ */ diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h index a110823..976256a 100644 --- a/arch/sh/include/mach-kfr2r09/mach/romimage.h +++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h @@ -1,3 +1,5 @@ +#ifdef __ASSEMBLY__ + /* kfr2r09 board specific boot code: * converts the "partner-jet-script.txt" script into assembly * the assembly code is the first code to be executed in the romImage @@ -18,3 +20,11 @@ .align 2 1: .long 0xa8000000 2: + +#else /* __ASSEMBLY__ */ + +extern inline void mmcif_update_progress(int nr) +{ +} + +#endif /* __ASSEMBLY__ */ diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 650b92f..e25f3c6 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -12,7 +12,7 @@ endif CFLAGS_REMOVE_return_address.o = -pg obj-y := clkdev.o debugtraps.o dma-nommu.o dumpstack.o \ - idle.o io.o io_generic.o irq.o \ + idle.o io.o irq.o \ irq_$(BITS).o machvec.o nmi_debug.o process.o \ process_$(BITS).o ptrace_$(BITS).o \ reboot.o return_address.o \ @@ -39,6 +39,7 @@ obj-$(CONFIG_DUMP_CODE) += disassemble.o obj-$(CONFIG_HIBERNATION) += swsusp.o obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o +obj-$(CONFIG_HAS_IOPORT) += io_generic.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 886d7d8..49c09c7 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -49,6 +49,8 @@ static DEFINE_SPINLOCK(dwarf_fde_lock); static struct dwarf_cie *cached_cie; +static unsigned int dwarf_unwinder_ready; + /** * dwarf_frame_alloc_reg - allocate memory for a DWARF register * @frame: the DWARF frame whose list of registers we insert on @@ -582,6 +584,13 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc, unsigned long addr; /* + * If we've been called in to before initialization has + * completed, bail out immediately. + */ + if (!dwarf_unwinder_ready) + return NULL; + + /* * If we're starting at the top of the stack we need get the * contents of a physical register to get the CFA in order to * begin the virtual unwinding of the stack. @@ -1167,7 +1176,7 @@ void module_dwarf_cleanup(struct module *mod) */ static int __init dwarf_unwinder_init(void) { - int err; + int err = -ENOMEM; dwarf_frame_cachep = kmem_cache_create("dwarf_frames", sizeof(struct dwarf_frame), 0, @@ -1181,11 +1190,15 @@ static int __init dwarf_unwinder_init(void) mempool_alloc_slab, mempool_free_slab, dwarf_frame_cachep); + if (!dwarf_frame_pool) + goto out; dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ, mempool_alloc_slab, mempool_free_slab, dwarf_reg_cachep); + if (!dwarf_reg_pool) + goto out; err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL); if (err) @@ -1195,11 +1208,13 @@ static int __init dwarf_unwinder_init(void) if (err) goto out; + dwarf_unwinder_ready = 1; + return 0; out: printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err); dwarf_unwinder_cleanup(); - return -EINVAL; + return err; } early_initcall(dwarf_unwinder_init); diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c index 4770c24..5c51b79 100644 --- a/arch/sh/kernel/io.c +++ b/arch/sh/kernel/io.c @@ -112,25 +112,3 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count) } } EXPORT_SYMBOL(memset_io); - -#ifndef CONFIG_GENERIC_IOMAP - -void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - void __iomem *ret; - - ret = __ioport_map_trapped(port, nr); - if (ret) - return ret; - - return __ioport_map(port, nr); -} -EXPORT_SYMBOL(ioport_map); - -void ioport_unmap(void __iomem *addr) -{ - sh_mv.mv_ioport_unmap(addr); -} -EXPORT_SYMBOL(ioport_unmap); - -#endif /* CONFIG_GENERIC_IOMAP */ diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c index e1e1dbd..447d78f 100644 --- a/arch/sh/kernel/io_generic.c +++ b/arch/sh/kernel/io_generic.c @@ -158,3 +158,23 @@ void __iomem *generic_ioport_map(unsigned long addr, unsigned int size) void generic_ioport_unmap(void __iomem *addr) { } + +#ifndef CONFIG_GENERIC_IOMAP +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + void __iomem *ret; + + ret = __ioport_map_trapped(port, nr); + if (ret) + return ret; + + return __ioport_map(port, nr); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ + sh_mv.mv_ioport_unmap(addr); +} +EXPORT_SYMBOL(ioport_unmap); +#endif /* CONFIG_GENERIC_IOMAP */ diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c index 4a8bb4e..2947d2b 100644 --- a/arch/sh/kernel/io_trapped.c +++ b/arch/sh/kernel/io_trapped.c @@ -91,10 +91,14 @@ int register_trapped_io(struct trapped_io *tiop) tiop->magic = IO_TRAPPED_MAGIC; INIT_LIST_HEAD(&tiop->list); spin_lock_irq(&trapped_lock); +#ifdef CONFIG_HAS_IOPORT if (flags & IORESOURCE_IO) list_add(&tiop->list, &trapped_io); +#endif +#ifdef CONFIG_HAS_IOMEM if (flags & IORESOURCE_MEM) list_add(&tiop->list, &trapped_mem); +#endif spin_unlock_irq(&trapped_lock); return 0; diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c index 85cfaf9..9f9bb63 100644 --- a/arch/sh/kernel/machvec.c +++ b/arch/sh/kernel/machvec.c @@ -118,6 +118,14 @@ void __init sh_mv_setup(void) sh_mv.mv_##elem = generic_##elem; \ } while (0) +#ifdef CONFIG_HAS_IOPORT + +#ifdef P2SEG + __set_io_port_base(P2SEG); +#else + __set_io_port_base(0); +#endif + mv_set(inb); mv_set(inw); mv_set(inl); mv_set(outb); mv_set(outw); mv_set(outl); @@ -129,16 +137,13 @@ void __init sh_mv_setup(void) mv_set(ioport_map); mv_set(ioport_unmap); + +#endif + mv_set(irq_demux); mv_set(mode_pins); mv_set(mem_init); if (!sh_mv.mv_nr_irqs) sh_mv.mv_nr_irqs = NR_IRQS; - -#ifdef P2SEG - __set_io_port_base(P2SEG); -#else - __set_io_port_base(0); -#endif } diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c index cbf1dd5..5124aeb 100644 --- a/arch/sh/kernel/return_address.c +++ b/arch/sh/kernel/return_address.c @@ -24,6 +24,8 @@ void *return_address(unsigned int depth) struct dwarf_frame *tmp; tmp = dwarf_unwind_stack(ra, frame); + if (!tmp) + return NULL; if (frame) dwarf_free_frame(frame); diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c index e22c969..6966342 100644 --- a/arch/um/kernel/skas/uaccess.c +++ b/arch/um/kernel/skas/uaccess.c @@ -81,7 +81,7 @@ static int do_op_one_page(unsigned long addr, int len, int is_write, current->thread.fault_catcher = NULL; - kunmap_atomic(page, KM_UML_USERCOPY); + kunmap_atomic((void *)addr, KM_UML_USERCOPY); return n; } diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index 8d8797e..cd2a31d 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -53,6 +53,8 @@ extern int pcibios_last_bus; extern struct pci_bus *pci_root_bus; extern struct pci_ops pci_root_ops; +void pcibios_scan_specific_bus(int busn); + /* pci-irq.c */ struct irq_info { diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 707165d..18cc425 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -36,6 +36,7 @@ #include <linux/fs.h> #include <linux/mm.h> #include <linux/debugfs.h> +#include <linux/edac_mce.h> #include <asm/processor.h> #include <asm/hw_irq.h> @@ -169,6 +170,15 @@ void mce_log(struct mce *mce) entry = rcu_dereference_check_mce(mcelog.next); for (;;) { /* + * If edac_mce is enabled, it will check the error type + * and will process it, if it is a known error. + * Otherwise, the error will be sent through mcelog + * interface + */ + if (edac_mce_parse(mce)) + return; + + /* * When the buffer fills up discard new entries. * Assume that the earlier errors are the more * interesting ones: diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index 0db5eaf..8d460ea 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -11,28 +11,14 @@ */ static void __devinit pcibios_fixup_peer_bridges(void) { - int n, devfn; - long node; + int n; if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff) return; DBG("PCI: Peer bridge fixup\n"); - for (n=0; n <= pcibios_last_bus; n++) { - u32 l; - if (pci_find_bus(0, n)) - continue; - node = get_mp_bus_to_node(n); - for (devfn = 0; devfn < 256; devfn += 8) { - if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && - l != 0x0000 && l != 0xffff) { - DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); - printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); - pci_scan_bus_on_node(n, &pci_root_ops, node); - break; - } - } - } + for (n=0; n <= pcibios_last_bus; n++) + pcibios_scan_specific_bus(n); } int __init pci_legacy_init(void) @@ -50,6 +36,28 @@ int __init pci_legacy_init(void) return 0; } +void pcibios_scan_specific_bus(int busn) +{ + int devfn; + long node; + u32 l; + + if (pci_find_bus(0, busn)) + return; + + node = get_mp_bus_to_node(busn); + for (devfn = 0; devfn < 256; devfn += 8) { + if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) && + l != 0x0000 && l != 0xffff) { + DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l); + printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn); + pci_scan_bus_on_node(busn, &pci_root_ops, node); + return; + } + } +} +EXPORT_SYMBOL_GPL(pcibios_scan_specific_bus); + int __init pci_subsys_init(void) { /* diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index bc07333..e367e30 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -105,7 +105,6 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ -survive: fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0); if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) @@ -146,15 +145,10 @@ bad_area: */ out_of_memory: up_read(&mm->mmap_sem); - if (is_global_init(current)) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } - printk("VM: killing process %s\n", current->comm); - if (user_mode(regs)) - do_group_exit(SIGKILL); - bad_page_fault(regs, address, SIGKILL); + if (!user_mode(regs)) + bad_page_fault(regs, address, SIGKILL); + else + pagefault_out_of_memory(); return; do_sigbus: |
