diff options
Diffstat (limited to 'arch')
375 files changed, 2997 insertions, 5437 deletions
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index 63a481f..338ff19 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p) *p = res | mask; raw_local_irq_restore(flags); - return res & mask; + return (res & mask) != 0; } static inline int @@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p) *p = res & ~mask; raw_local_irq_restore(flags); - return res & mask; + return (res & mask) != 0; } static inline int @@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) *p = res ^ mask; raw_local_irq_restore(flags); - return res & mask; + return (res & mask) != 0; } #include <asm-generic/bitops/non-atomic.h> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 4cdc4a0..d38cdf2 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/time.h> #include <linux/init.h> +#include <linux/sched.h> #include <linux/smp.h> #include <linux/timex.h> #include <linux/errno.h> diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 467b69e..f838f36 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str) __setup("user_debug=", user_debug_setup); #endif -static void dump_mem(const char *str, unsigned long bottom, unsigned long top); +static void dump_mem(const char *, const char *, unsigned long, unsigned long); void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame) { #ifdef CONFIG_KALLSYMS - printk("[<%08lx>] ", where); - print_symbol("(%s) ", where); - printk("from [<%08lx>] ", from); - print_symbol("(%s)\n", from); + char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN]; + sprint_symbol(sym1, where); + sprint_symbol(sym2, from); + printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2); #else printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from); #endif if (in_exception_text(where)) - dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); + dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); } #ifndef CONFIG_ARM_UNWIND @@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp) /* * Dump out the contents of some memory nicely... */ -static void dump_mem(const char *str, unsigned long bottom, unsigned long top) +static void dump_mem(const char *lvl, const char *str, unsigned long bottom, + unsigned long top) { - unsigned long p = bottom & ~31; + unsigned long first; mm_segment_t fs; int i; @@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top) fs = get_fs(); set_fs(KERNEL_DS); - printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); + printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top); - for (p = bottom & ~31; p < top;) { - printk("%04lx: ", p & 0xffff); + for (first = bottom & ~31; first < top; first += 32) { + unsigned long p; + char str[sizeof(" 12345678") * 8 + 1]; - for (i = 0; i < 8; i++, p += 4) { - unsigned int val; + memset(str, ' ', sizeof(str)); + str[sizeof(str) - 1] = '\0'; - if (p < bottom || p >= top) - printk(" "); - else { - __get_user(val, (unsigned long *)p); - printk("%08x ", val); + for (p = first, i = 0; i < 8 && p < top; i++, p += 4) { + if (p >= bottom && p < top) { + unsigned long val; + if (__get_user(val, (unsigned long *)p) == 0) + sprintf(str + i * 9, " %08lx", val); + else + sprintf(str + i * 9, " ????????"); } } - printk ("\n"); + printk("%s%04lx:%s\n", lvl, first & 0xffff, str); } set_fs(fs); } -static void dump_instr(struct pt_regs *regs) +static void dump_instr(const char *lvl, struct pt_regs *regs) { unsigned long addr = instruction_pointer(regs); const int thumb = thumb_mode(regs); const int width = thumb ? 4 : 8; mm_segment_t fs; + char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str; int i; /* @@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs) fs = get_fs(); set_fs(KERNEL_DS); - printk("Code: "); for (i = -4; i < 1; i++) { unsigned int val, bad; @@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs) bad = __get_user(val, &((u32 *)addr)[i]); if (!bad) - printk(i == 0 ? "(%0*x) " : "%0*x ", width, val); + p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ", + width, val); else { - printk("bad PC value."); + p += sprintf(p, "bad PC value"); break; } } - printk("\n"); + printk("%sCode: %s\n", lvl, str); set_fs(fs); } @@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p struct task_struct *tsk = thread->task; static int die_counter; - printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n", + printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n", str, err, ++die_counter); + sysfs_printk_last_file(); print_modules(); __show_regs(regs); - printk("Process %s (pid: %d, stack limit = 0x%p)\n", - tsk->comm, task_pid_nr(tsk), thread + 1); + printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n", + TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1); if (!user_mode(regs) || in_interrupt()) { - dump_mem("Stack: ", regs->ARM_sp, + dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp, THREAD_SIZE + (unsigned long)task_stack_page(tsk)); dump_backtrace(regs, tsk); - dump_instr(regs); + dump_instr(KERN_EMERG, regs); } } @@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) oops_enter(); - console_verbose(); spin_lock_irq(&die_lock); + console_verbose(); bust_spinlocks(1); __die(str, err, thread, regs); bust_spinlocks(0); add_taint(TAINT_DIE); spin_unlock_irq(&die_lock); + oops_exit(); if (in_interrupt()) panic("Fatal exception in interrupt"); @@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) if (panic_on_oops) panic("Fatal exception"); - oops_exit(); do_exit(SIGSEGV); } @@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", current->comm, task_pid_nr(current), pc); - dump_instr(regs); + dump_instr(KERN_INFO, regs); } #endif @@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs) if (user_debug & UDBG_SYSCALL) { printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n", task_pid_nr(current), current->comm, n); - dump_instr(regs); + dump_instr(KERN_ERR, regs); } #endif @@ -579,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if (user_debug & UDBG_SYSCALL) { printk("[%d] %s: arm syscall %d\n", task_pid_nr(current), current->comm, no); - dump_instr(regs); + dump_instr("", regs); if (user_mode(regs)) { __show_regs(regs); c_backtrace(regs->ARM_fp, processor_mode(regs)); @@ -656,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs) if (user_debug & UDBG_BADABORT) { printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n", task_pid_nr(current), current->comm, code, instr); - dump_instr(regs); + dump_instr(KERN_ERR, regs); show_pte(current->mm, addr); } #endif diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 4b4f692..e590bbe 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -271,12 +271,12 @@ static struct irqaction bcmring_timer_irq = { .handler = bcmring_timer_interrupt, }; -static cycle_t bcmring_get_cycles_timer1(void) +static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs) { return ~readl(TIMER1_VA_BASE + TIMER_VALUE); } -static cycle_t bcmring_get_cycles_timer3(void) +static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs) { return ~readl(TIMER3_VA_BASE + TIMER_VALUE); } diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h index cdbf93c..38b3706 100644 --- a/arch/arm/mach-bcmring/include/mach/system.h +++ b/arch/arm/mach-bcmring/include/mach/system.h @@ -29,7 +29,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, char *cmd) +static inline void arch_reset(char mode, const char *cmd) { printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index d7291c6..9167c3d 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "0x00000000 - SDCE3/SyncBoot" help Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0x00000000 + first SDRAM bank at 0x00000000. config EP93XX_SDCE0_PHYS_OFFSET bool "0xc0000000 - SDCEO" help Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xc0000000 + first SDRAM bank at 0xc0000000. + +config EP93XX_SDCE1_PHYS_OFFSET + bool "0xd0000000 - SDCE1" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xd0000000. + +config EP93XX_SDCE2_PHYS_OFFSET + bool "0xe0000000 - SDCE2" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xe0000000. + +config EP93XX_SDCE3_ASYNC_PHYS_OFFSET + bool "0xf0000000 - SDCE3/AsyncBoot" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xf0000000. endchoice @@ -112,28 +130,36 @@ config MACH_MICRO9 bool config MACH_MICRO9H - bool "Support Contec Hypercontrol Micro9-H" + bool "Support Contec Micro9-High" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-H board. + Contec Micro9-High board. config MACH_MICRO9M - bool "Support Contec Hypercontrol Micro9-M" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + bool "Support Contec Micro9-Mid" + depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-M board. + Contec Micro9-Mid board. config MACH_MICRO9L - bool "Support Contec Hypercontrol Micro9-L" + bool "Support Contec Micro9-Lite" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-L board. + Contec Micro9-Lite board. + +config MACH_MICRO9S + bool "Support Contec Micro9-Slim" + depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Micro9-Slim board. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index 27a085a..0ad33f1 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 + + zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000 +params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100 + + zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000 +params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100 + + zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000 +params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100 diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index dda19cd7..1d0f9d8 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -16,13 +16,16 @@ #include <linux/module.h> #include <linux/string.h> #include <linux/io.h> +#include <linux/spinlock.h> + +#include <mach/hardware.h> #include <asm/clkdev.h> #include <asm/div64.h> -#include <mach/hardware.h> struct clk { + struct clk *parent; unsigned long rate; int users; int sw_locked; @@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk); static int set_keytchclk_rate(struct clk *clk, unsigned long rate); static int set_div_rate(struct clk *clk, unsigned long rate); + +static struct clk clk_xtali = { + .rate = EP93XX_EXT_CLK_RATE, +}; static struct clk clk_uart1 = { + .parent = &clk_xtali, .sw_locked = 1, .enable_reg = EP93XX_SYSCON_DEVCFG, .enable_mask = EP93XX_SYSCON_DEVCFG_U1EN, .get_rate = get_uart_rate, }; static struct clk clk_uart2 = { + .parent = &clk_xtali, .sw_locked = 1, .enable_reg = EP93XX_SYSCON_DEVCFG, .enable_mask = EP93XX_SYSCON_DEVCFG_U2EN, .get_rate = get_uart_rate, }; static struct clk clk_uart3 = { + .parent = &clk_xtali, .sw_locked = 1, .enable_reg = EP93XX_SYSCON_DEVCFG, .enable_mask = EP93XX_SYSCON_DEVCFG_U3EN, .get_rate = get_uart_rate, }; -static struct clk clk_pll1; -static struct clk clk_f; -static struct clk clk_h; -static struct clk clk_p; -static struct clk clk_pll2; +static struct clk clk_pll1 = { + .parent = &clk_xtali, +}; +static struct clk clk_f = { + .parent = &clk_pll1, +}; +static struct clk clk_h = { + .parent = &clk_pll1, +}; +static struct clk clk_p = { + .parent = &clk_pll1, +}; +static struct clk clk_pll2 = { + .parent = &clk_xtali, +}; static struct clk clk_usb_host = { + .parent = &clk_pll2, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN, }; static struct clk clk_keypad = { + .parent = &clk_xtali, .sw_locked = 1, .enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV, .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN, .set_rate = set_keytchclk_rate, }; static struct clk clk_pwm = { + .parent = &clk_xtali, .rate = EP93XX_EXT_CLK_RATE, }; @@ -85,50 +108,62 @@ static struct clk clk_video = { /* DMA Clocks */ static struct clk clk_m2p0 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0, }; static struct clk clk_m2p1 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1, }; static struct clk clk_m2p2 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2, }; static struct clk clk_m2p3 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3, }; static struct clk clk_m2p4 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4, }; static struct clk clk_m2p5 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5, }; static struct clk clk_m2p6 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6, }; static struct clk clk_m2p7 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7, }; static struct clk clk_m2p8 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8, }; static struct clk clk_m2p9 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9, }; static struct clk clk_m2m0 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0, }; static struct clk clk_m2m1 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1, }; @@ -137,6 +172,7 @@ static struct clk clk_m2m1 = { { .dev_id = dev, .con_id = con, .clk = ck } static struct clk_lookup clocks[] = { + INIT_CK(NULL, "xtali", &clk_xtali), INIT_CK("apb:uart1", NULL, &clk_uart1), INIT_CK("apb:uart2", NULL, &clk_uart2), INIT_CK("apb:uart3", NULL, &clk_uart3), @@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "m2m1", &clk_m2m1), }; +static DEFINE_SPINLOCK(clk_lock); + +static void __clk_enable(struct clk *clk) +{ + if (!clk->users++) { + if (clk->parent) + __clk_enable(clk->parent); + + if (clk->enable_reg) { + u32 v; + + v = __raw_readl(clk->enable_reg); + v |= clk->enable_mask; + if (clk->sw_locked) + ep93xx_syscon_swlocked_write(v, clk->enable_reg); + else + __raw_writel(v, clk->enable_reg); + } + } +} int clk_enable(struct clk *clk) { - if (!clk->users++ && clk->enable_reg) { - u32 value; + unsigned long flags; - value = __raw_readl(clk->enable_reg); - value |= clk->enable_mask; - if (clk->sw_locked) - ep93xx_syscon_swlocked_write(value, clk->enable_reg); - else - __raw_writel(value, clk->enable_reg); - } + if (!clk) + return -EINVAL; + + spin_lock_irqsave(&clk_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clk_lock, flags); return 0; } EXPORT_SYMBOL(clk_enable); -void clk_disable(struct clk *clk) +static void __clk_disable(struct clk *clk) { - if (!--clk->users && clk->enable_reg) { - u32 value; + if (!--clk->users) { + if (clk->enable_reg) { + u32 v; + + v = __raw_readl(clk->enable_reg); + v &= ~clk->enable_mask; + if (clk->sw_locked) + ep93xx_syscon_swlocked_write(v, clk->enable_reg); + else + __raw_writel(v, clk->enable_reg); + } - value = __raw_readl(clk->enable_reg); - value &= ~clk->enable_mask; - if (clk->sw_locked) - ep93xx_syscon_swlocked_write(value, clk->enable_reg); - else - __raw_writel(value, clk->enable_reg); + if (clk->parent) + __clk_disable(clk->parent); } } + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (!clk) + return; + + spin_lock_irqsave(&clk_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clk_lock, flags); +} EXPORT_SYMBOL(clk_disable); static unsigned long get_uart_rate(struct clk *clk) { + unsigned long rate = clk_get_rate(clk->parent); u32 value; value = __raw_readl(EP93XX_SYSCON_PWRCNT); if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) - return EP93XX_EXT_CLK_RATE; + return rate; else - return EP93XX_EXT_CLK_RATE / 2; + return rate / 2; } unsigned long clk_get_rate(struct clk *clk) @@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate) return 0; } -static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel, - int *pdiv, int *div) +static int calc_clk_div(struct clk *clk, unsigned long rate, + int *psel, int *esel, int *pdiv, int *div) { - unsigned long max_rate, best_rate = 0, - actual_rate = 0, mclk_rate = 0, rate_err = -1; + struct clk *mclk; + unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1; int i, found = 0, __div = 0, __pdiv = 0; /* Don't exceed the maximum rate */ max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4), - (unsigned long)EP93XX_EXT_CLK_RATE / 4); + clk_xtali.rate / 4); rate = min(rate, max_rate); /* @@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel, */ for (i = 0; i < 3; i++) { if (i == 0) - mclk_rate = EP93XX_EXT_CLK_RATE * 2; + mclk = &clk_xtali; else if (i == 1) - mclk_rate = clk_pll1.rate * 2; - else if (i == 2) - mclk_rate = clk_pll2.rate * 2; + mclk = &clk_pll1; + else + mclk = &clk_pll2; + mclk_rate = mclk->rate * 2; /* Try each predivider value */ for (__pdiv = 4; __pdiv <= 6; __pdiv++) { @@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel, *div = __div; *psel = (i == 2); *esel = (i != 0); - best_rate = actual_rate; + clk->parent = mclk; + clk->rate = actual_rate; rate_err = abs(actual_rate - rate); found = 1; } @@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel, } if (!found) - return 0; + return -EINVAL; - return best_rate; + return 0; } static int set_div_rate(struct clk *clk, unsigned long rate) { - unsigned long actual_rate; - int psel = 0, esel = 0, pdiv = 0, div = 0; + int err, psel = 0, esel = 0, pdiv = 0, div = 0; u32 val; - actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div); - if (actual_rate == 0) - return -EINVAL; - clk->rate = actual_rate; + err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div); + if (err) + return err; /* Clear the esel, psel, pdiv and div bits */ val = __raw_readl(clk->enable_reg); @@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word) unsigned long long rate; int i; - rate = EP93XX_EXT_CLK_RATE; + rate = clk_xtali.rate; rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ @@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1); if (!(value & 0x00800000)) { /* PLL1 bypassed? */ - clk_pll1.rate = EP93XX_EXT_CLK_RATE; + clk_pll1.rate = clk_xtali.rate; } else { clk_pll1.rate = calc_pll_rate(value); } @@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2); if (!(value & 0x00080000)) { /* PLL2 bypassed? */ - clk_pll2.rate = EP93XX_EXT_CLK_RATE; + clk_pll2.rate = clk_xtali.rate; } else if (value & 0x00040000) { /* PLL2 enabled? */ clk_pll2.rate = calc_pll_rate(value); } else { diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f7ebed9..f95dc16 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -550,13 +550,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) platform_device_register(&ep93xx_eth_device); } -static struct i2c_gpio_platform_data ep93xx_i2c_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 2, -}; + +/************************************************************************* + * EP93xx i2c peripheral handling + *************************************************************************/ +static struct i2c_gpio_platform_data ep93xx_i2c_data; static struct platform_device ep93xx_i2c_device = { .name = "i2c-gpio", @@ -564,8 +562,25 @@ static struct platform_device ep93xx_i2c_device = { .dev.platform_data = &ep93xx_i2c_data, }; -void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) +void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, + struct i2c_board_info *devices, int num) { + /* + * Set the EEPROM interface pin drive type control. + * Defines the driver type for the EECLK and EEDAT pins as either + * open drain, which will require an external pull-up, or a normal + * CMOS driver. + */ + if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) + pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n"); + if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) + pr_warning("ep93xx: scl != EECLK, open drain has no effect\n"); + + __raw_writel((data->sda_is_open_drain << 1) | + (data->scl_is_open_drain << 0), + EP93XX_GPIO_EEDRIVE); + + ep93xx_i2c_data = *data; i2c_register_board_info(0, devices, num); platform_device_register(&ep93xx_i2c_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 73145ae..ca71cf1a 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -27,8 +27,10 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/i2c.h> #include <linux/mtd/physmap.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> #include <mach/hardware.h> @@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = { .phy_id = 1, }; -static struct i2c_board_info __initdata edb93xxa_i2c_data[] = { + +/************************************************************************* + * EDB93xx i2c peripheral handling + *************************************************************************/ +static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = { + .sda_pin = EP93XX_GPIO_LINE_EEDAT, + .sda_is_open_drain = 0, + .scl_pin = EP93XX_GPIO_LINE_EECLK, + .scl_is_open_drain = 0, + .udelay = 0, /* default to 100 kHz */ + .timeout = 0, /* default to 100 ms */ +}; + +static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { { I2C_BOARD_INFO("isl1208", 0x6f), }, }; -static struct i2c_board_info __initdata edb93xx_i2c_data[] = { +static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = { { I2C_BOARD_INFO("ds1337", 0x68), }, @@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void) { if (machine_is_edb9302a() || machine_is_edb9307a() || machine_is_edb9315a()) { - ep93xx_register_i2c(edb93xxa_i2c_data, - ARRAY_SIZE(edb93xxa_i2c_data)); + ep93xx_register_i2c(&edb93xx_i2c_gpio_data, + edb93xxa_i2c_board_info, + ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(edb93xx_i2c_data, - ARRAY_SIZE(edb93xx_i2c_data)); + ep93xx_register_i2c(&edb93xx_i2c_gpio_data + edb93xx_i2c_board_info, + ARRAY_SIZE(edb93xx_i2c_board_info)); } } diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 0fbf87b..b1f937e 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -52,25 +52,27 @@ #define EP93XX_AHB_VIRT_BASE 0xfef00000 #define EP93XX_AHB_SIZE 0x00100000 +#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x)) #define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x)) #define EP93XX_APB_PHYS_BASE 0x80800000 #define EP93XX_APB_VIRT_BASE 0xfed00000 #define EP93XX_APB_SIZE 0x00200000 +#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) #define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) /* AHB peripherals */ #define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) -#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000) +#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) #define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) -#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000) +#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) #define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) -#define EP93XX_RASTER_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00030000) +#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) #define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) #define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) @@ -112,21 +114,10 @@ #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c) -#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50) -#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54) -#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58) #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90) -#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94) -#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98) -#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c) #define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac) -#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0) -#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4) -#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) +#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) #define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) @@ -134,13 +125,13 @@ #define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) -#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000) +#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) #define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) -#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000) +#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000) #define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000) -#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000) +#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) #define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) #define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) @@ -148,10 +139,10 @@ #define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) #define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000) +#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) #define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) -#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000) +#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) #define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) #define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) @@ -218,6 +209,17 @@ #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) +#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) +#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) +#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) +#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) +#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) +#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) +#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) +#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) +#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) +#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) +#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) #define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h index 0a1498a..c991b14 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio.h @@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable); * B0..B7 (7..15) to irq 72..79, and * F0..F7 (16..24) to irq 80..87. */ -static inline int gpio_to_irq(unsigned gpio) -{ - if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) - return 64 + gpio; - - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq - gpio_to_irq(0); -} +#define gpio_to_irq(gpio) \ + (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL) + +#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) #endif diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h index 925b12e..554064e 100644 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ b/arch/arm/mach-ep93xx/include/mach/memory.h @@ -9,6 +9,12 @@ #define PHYS_OFFSET UL(0x00000000) #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) #define PHYS_OFFSET UL(0xc0000000) +#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xd0000000) +#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xe0000000) +#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xf0000000) #else #error "Kconfig bug: No EP93xx PHYS_OFFSET set" #endif diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 01a0f08..a3ec33f 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -4,6 +4,7 @@ #ifndef __ASSEMBLY__ +struct i2c_gpio_platform_data; struct i2c_board_info; struct platform_device; struct ep93xxfb_mach_info; @@ -33,7 +34,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits) } void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_board_info *devices, int num); +void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, + struct i2c_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); void ep93xx_register_pwm(int pwm0, int pwm1); int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 0a313e8..d83b804 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -2,7 +2,9 @@ * linux/arch/arm/mach-ep93xx/micro9.c * * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH - * Manfred Gruber <manfred.gruber@contec.at> + * Manfred Gruber <m.gruber@tirol.com> + * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH + * Hubert Feurstein <hubert.feurstein@contec.at> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -20,104 +22,124 @@ #include <asm/mach/arch.h> -static struct ep93xx_eth_data micro9_eth_data = { - .phy_id = 0x1f, -}; - -static void __init micro9_init(void) -{ - ep93xx_register_eth(µ9_eth_data, 1); -} - -/* - * Micro9-H - */ -#ifdef CONFIG_MACH_MICRO9H -static struct physmap_flash_data micro9h_flash_data = { - .width = 4, -}; - -static struct resource micro9h_flash_resource = { +/************************************************************************* + * Micro9 NOR Flash + * + * Micro9-High has up to 64MB of 32-bit flash on CS1 + * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1 + * Micro9-Lite uses a seperate MTD map driver for flash support + * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1 + *************************************************************************/ +static struct physmap_flash_data micro9_flash_data; + +static struct resource micro9_flash_resource = { .start = EP93XX_CS1_PHYS_BASE, .end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device micro9h_flash = { +static struct platform_device micro9_flash = { .name = "physmap-flash", .id = 0, .dev = { - .platform_data = µ9h_flash_data, + .platform_data = µ9_flash_data, }, .num_resources = 1, - .resource = µ9h_flash_resource, + .resource = µ9_flash_resource, }; -static void __init micro9h_init(void) +static void __init __micro9_register_flash(unsigned int width) +{ + micro9_flash_data.width = width; + + platform_device_register(µ9_flash); +} + +static unsigned int __init micro9_detect_bootwidth(void) +{ + u32 v; + + /* Detect the bus width of the external flash memory */ + v = __raw_readl(EP93XX_SYSCON_SYSCFG); + if (v & EP93XX_SYSCON_SYSCFG_LCSN7) + return 4; /* 32-bit */ + else + return 2; /* 16-bit */ +} + +static void __init micro9_register_flash(void) { - platform_device_register(µ9h_flash); + if (machine_is_micro9()) + __micro9_register_flash(4); + else if (machine_is_micro9m() || machine_is_micro9s()) + __micro9_register_flash(micro9_detect_bootwidth()); } -static void __init micro9h_init_machine(void) + +/************************************************************************* + * Micro9 Ethernet + *************************************************************************/ +static struct ep93xx_eth_data micro9_eth_data = { + .phy_id = 0x1f, +}; + + +static void __init micro9_init_machine(void) { ep93xx_init_devices(); - micro9_init(); - micro9h_init(); + ep93xx_register_eth(µ9_eth_data, 1); + micro9_register_flash(); } -MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ + +#ifdef CONFIG_MACH_MICRO9H +MACHINE_START(MICRO9, "Contec Micro9-High") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9h_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -/* - * Micro9-M - */ #ifdef CONFIG_MACH_MICRO9M -static void __init micro9m_init_machine(void) -{ - ep93xx_init_devices(); - micro9_init(); -} - -MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ +MACHINE_START(MICRO9M, "Contec Micro9-Mid") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9m_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -/* - * Micro9-L - */ #ifdef CONFIG_MACH_MICRO9L -static void __init micro9l_init_machine(void) -{ - ep93xx_init_devices(); - micro9_init(); -} - -MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ +MACHINE_START(MICRO9L, "Contec Micro9-Lite") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9l_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif +#ifdef CONFIG_MACH_MICRO9S +MACHINE_START(MICRO9S, "Contec Micro9-Slim") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9_init_machine, +MACHINE_END +#endif diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 901cc20..148d25f 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -31,6 +31,7 @@ #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/signal.h> #include <asm/system.h> #include <asm/mach/pci.h> #include <asm/irq_regs.h> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index b45ad31..c1af532 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -38,49 +38,49 @@ static int board_keymap[] = { KEY(0, 0, KEY_Q), - KEY(0, 1, KEY_W), - KEY(0, 2, KEY_E), - KEY(0, 3, KEY_R), - KEY(0, 4, KEY_T), - KEY(0, 5, KEY_Y), - KEY(0, 6, KEY_U), - KEY(0, 7, KEY_I), - KEY(1, 0, KEY_O), + KEY(0, 1, KEY_O), + KEY(0, 2, KEY_P), + KEY(0, 3, KEY_COMMA), + KEY(0, 4, KEY_BACKSPACE), + KEY(0, 6, KEY_A), + KEY(0, 7, KEY_S), + KEY(1, 0, KEY_W), KEY(1, 1, KEY_D), - KEY(1, 2, KEY_DOT), - KEY(1, 3, KEY_V), - KEY(1, 4, KEY_DOWN), - KEY(2, 0, KEY_P), - KEY(2, 1, KEY_F), + KEY(1, 2, KEY_F), + KEY(1, 3, KEY_G), + KEY(1, 4, KEY_H), + KEY(1, 5, KEY_J), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_L), + KEY(2, 0, KEY_E), + KEY(2, 1, KEY_DOT), KEY(2, 2, KEY_UP), - KEY(2, 3, KEY_B), - KEY(2, 4, KEY_RIGHT), - KEY(3, 0, KEY_COMMA), - KEY(3, 1, KEY_G), - KEY(3, 2, KEY_ENTER), + KEY(2, 3, KEY_ENTER), + KEY(2, 5, KEY_Z), + KEY(2, 6, KEY_X), + KEY(2, 7, KEY_C), + KEY(3, 0, KEY_R), + KEY(3, 1, KEY_V), + KEY(3, 2, KEY_B), KEY(3, 3, KEY_N), - KEY(4, 0, KEY_BACKSPACE), - KEY(4, 1, KEY_H), - KEY(4, 3, KEY_M), + KEY(3, 4, KEY_M), + KEY(3, 5, KEY_SPACE), + KEY(3, 6, KEY_SPACE), + KEY(3, 7, KEY_LEFT), + KEY(4, 0, KEY_T), + KEY(4, 1, KEY_DOWN), + KEY(4, 2, KEY_RIGHT), KEY(4, 4, KEY_LEFTCTRL), - KEY(5, 1, KEY_J), - KEY(5, 2, KEY_Z), - KEY(5, 3, KEY_SPACE), - KEY(5, 4, KEY_LEFTSHIFT), - KEY(6, 0, KEY_A), - KEY(6, 1, KEY_K), - KEY(6, 2, KEY_X), - KEY(6, 3, KEY_SPACE), - KEY(6, 4, KEY_FN), - KEY(7, 0, KEY_S), - KEY(7, 1, KEY_L), - KEY(7, 2, KEY_C), - KEY(7, 3, KEY_LEFT), - KEY(0xff, 0, KEY_F6), - KEY(0xff, 1, KEY_F7), - KEY(0xff, 2, KEY_F8), - KEY(0xff, 4, KEY_F9), - KEY(0xff, 5, KEY_F10), + KEY(4, 5, KEY_RIGHTALT), + KEY(4, 6, KEY_LEFTSHIFT), + KEY(5, 0, KEY_Y), + KEY(6, 0, KEY_U), + KEY(7, 0, KEY_I), + KEY(7, 1, KEY_F7), + KEY(7, 2, KEY_F8), + KEY(0xff, 2, KEY_F9), + KEY(0xff, 4, KEY_F10), + KEY(0xff, 5, KEY_F11), }; static struct matrix_keymap_data board_map_data = { diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index fafcd32..489556e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -338,6 +338,13 @@ static struct omap_clk omap34xx_clks[] = { */ #define SDRC_MPURATE_LOOPS 96 +/* + * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks + * that are sourced by DPLL5, and both of these require this clock + * to be at 120 MHz for proper operation. + */ +#define DPLL5_FREQ_FOR_USBHOST 120000000 + /** * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI * @clk: struct clk * being enabled @@ -1056,6 +1063,28 @@ void omap2_clk_prepare_for_reboot(void) #endif } +static void omap3_clk_lock_dpll5(void) +{ + struct clk *dpll5_clk; + struct clk *dpll5_m2_clk; + + dpll5_clk = clk_get(NULL, "dpll5_ck"); + clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); + clk_enable(dpll5_clk); + + /* Enable autoidle to allow it to enter low power bypass */ + omap3_dpll_allow_idle(dpll5_clk); + + /* Program dpll5_m2_clk divider for no division */ + dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); + clk_enable(dpll5_m2_clk); + clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST); + + clk_disable(dpll5_m2_clk); + clk_disable(dpll5_clk); + return; +} + /* REVISIT: Move this init stuff out into clock.c */ /* @@ -1148,6 +1177,12 @@ int __init omap2_clk_init(void) */ clk_enable_init_clocks(); + /* + * Lock DPLL5 and put it in autoidle. + */ + if (omap_rev() >= OMAP3430_REV_ES2_0) + omap3_clk_lock_dpll5(); + /* Avoid sleeping during omap2_clk_prepare_for_reboot() */ /* REVISIT: not yet ready for 343x */ #if 0 diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 1b4c160..2fc4d6a 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -541,7 +541,7 @@ static int __init pm_dbg_init(void) printk(KERN_ERR "%s: only OMAP3 supported\n", __func__); return -ENODEV; } - + d = debugfs_create_dir("pm_debug", NULL); if (IS_ERR(d)) return PTR_ERR(d); @@ -551,7 +551,7 @@ static int __init pm_dbg_init(void) (void) debugfs_create_file("time", S_IRUGO, d, (void *)DEBUG_FILE_TIMERS, &debug_fops); - pwrdm_for_each(pwrdms_setup, (void *)d); + pwrdm_for_each_nolock(pwrdms_setup, (void *)d); pm_dbg_dir = debugfs_create_dir("registers", d); if (IS_ERR(pm_dbg_dir)) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0ff5a6c..378c2f6 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -51,97 +51,112 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state); static struct powerdomain *mpu_pwrdm; -/* PRCM Interrupt Handler for wakeups */ -static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +/* + * PRCM Interrupt Handler Helper Function + * + * The purpose of this function is to clear any wake-up events latched + * in the PRCM PM_WKST_x registers. It is possible that a wake-up event + * may occur whilst attempting to clear a PM_WKST_x register and thus + * set another bit in this register. A while loop is used to ensure + * that any peripheral wake-up events occurring while attempting to + * clear the PM_WKST_x are detected and cleared. + */ +static int prcm_clear_mod_irqs(s16 module, u8 regs) { - u32 wkst, irqstatus_mpu; - u32 fclk, iclk; - - /* WKUP */ - wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST); + u32 wkst, fclk, iclk, clken; + u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1; + u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1; + u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1; + u16 grpsel_off = (regs == 3) ? + OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL; + int c = 0; + + wkst = prm_read_mod_reg(module, wkst_off); + wkst &= prm_read_mod_reg(module, grpsel_off); if (wkst) { - iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); - fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); - cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN); - cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN); - prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST); - while (prm_read_mod_reg(WKUP_MOD, PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN); - cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN); + iclk = cm_read_mod_reg(module, iclk_off); + fclk = cm_read_mod_reg(module, fclk_off); + while (wkst) { + clken = wkst; + cm_set_mod_reg_bits(clken, module, iclk_off); + /* + * For USBHOST, we don't know whether HOST1 or + * HOST2 woke us up, so enable both f-clocks + */ + if (module == OMAP3430ES2_USBHOST_MOD) + clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT; + cm_set_mod_reg_bits(clken, module, fclk_off); + prm_write_mod_reg(wkst, module, wkst_off); + wkst = prm_read_mod_reg(module, wkst_off); + c++; + } + cm_write_mod_reg(iclk, module, iclk_off); + cm_write_mod_reg(fclk, module, fclk_off); } - /* CORE */ - wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1); - if (wkst) { - iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); - fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1); - prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1); - while (prm_read_mod_reg(CORE_MOD, PM_WKST1)) - cpu_relax(); - cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1); - cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1); - } - wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3); - if (wkst) { - iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); - fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3); - cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3); - while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3)) - cpu_relax(); - cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3); - cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - } + return c; +} - /* PER */ - wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST); - if (wkst) { - iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); - fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN); - prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST); - while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN); - cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN); - } +static int _prcm_int_handle_wakeup(void) +{ + int c; + c = prcm_clear_mod_irqs(WKUP_MOD, 1); + c += prcm_clear_mod_irqs(CORE_MOD, 1); + c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1); if (omap_rev() > OMAP3430_REV_ES1_0) { - /* USBHOST */ - wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST); - if (wkst) { - iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD, - PM_WKST); - while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - } + c += prcm_clear_mod_irqs(CORE_MOD, 3); + c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1); } - irqstatus_mpu = prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - prm_write_mod_reg(irqstatus_mpu, OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + return c; +} + +/* + * PRCM Interrupt Handler + * + * The PRM_IRQSTATUS_MPU register indicates if there are any pending + * interrupts from the PRCM for the MPU. These bits must be cleared in + * order to clear the PRCM interrupt. The PRCM interrupt handler is + * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear + * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU + * register indicates that a wake-up event is pending for the MPU and + * this bit can only be cleared if the all the wake-up events latched + * in the various PM_WKST_x registers have been cleared. The interrupt + * handler is implemented using a do-while loop so that if a wake-up + * event occurred during the processing of the prcm interrupt handler + * (setting a bit in the corresponding PM_WKST_x register and thus + * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register) + * this would be handled. + */ +static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +{ + u32 irqstatus_mpu; + int c = 0; + + do { + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) { + c = _prcm_int_handle_wakeup(); + + /* + * Is the MPU PRCM interrupt handler racing with the + * IVA2 PRCM interrupt handler ? + */ + WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup " + "but no wakeup sources are marked\n"); + } else { + /* XXX we need to expand our PRCM interrupt handler */ + WARN(1, "prcm: WARNING: PRCM interrupt received, but " + "no code to handle it (%08x)\n", irqstatus_mpu); + } + + prm_write_mod_reg(irqstatus_mpu, OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)) - cpu_relax(); + } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)); return IRQ_HANDLED; } @@ -624,6 +639,16 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + /* Enable GPIO wakeups in PER */ + prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | + OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | + OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN); + /* and allow them to wake up MPU */ + prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | + OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | + OMAP3430_GRPSEL_GPIO6, + OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); + /* Don't attach IVA interrupts */ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 2594cbf..f00289a 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name) } /** - * pwrdm_for_each - call function on each registered clockdomain + * pwrdm_for_each_nolock - call function on each registered clockdomain * @fn: callback function * * * Call the supplied function for each registered powerdomain. The * callback function can return anything but 0 to bail out early from - * the iterator. The callback function is called with the pwrdm_rwlock - * held for reading, so no powerdomain structure manipulation - * functions should be called from the callback, although hardware - * powerdomain control functions are fine. Returns the last return - * value of the callback function, which should be 0 for success or - * anything else to indicate failure; or -EINVAL if the function - * pointer is null. + * the iterator. Returns the last return value of the callback function, which + * should be 0 for success or anything else to indicate failure; or -EINVAL if + * the function pointer is null. */ -int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user), - void *user) +int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user), + void *user) { struct powerdomain *temp_pwrdm; - unsigned long flags; int ret = 0; if (!fn) return -EINVAL; - read_lock_irqsave(&pwrdm_rwlock, flags); list_for_each_entry(temp_pwrdm, &pwrdm_list, node) { ret = (*fn)(temp_pwrdm, user); if (ret) break; } + + return ret; +} + +/** + * pwrdm_for_each - call function on each registered clockdomain + * @fn: callback function * + * + * This function is the same as 'pwrdm_for_each_nolock()', but keeps the + * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation + * functions should be called from the callback, although hardware powerdomain + * control functions are fine. + */ +int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user), + void *user) +{ + unsigned long flags; + int ret; + + read_lock_irqsave(&pwrdm_rwlock, flags); + ret = pwrdm_for_each_nolock(fn, user); read_unlock_irqrestore(&pwrdm_rwlock, flags); return ret; diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 3a8ee22..983cc8c 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table static pxa_freqs_t pxa27x_freqs[] = { {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 }, - {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 }, + {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 }, {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 }, {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 }, {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 }, diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 79141f8..965480e 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = { }; struct smsc911x_platform_config csb726_lan_config = { - .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .flags = SMSC911X_USE_32BIT, .phy_interface = PHY_INTERFACE_MODE_MII, diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 8a5546e..bb7b819 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF) += leds-cerf.o obj-$(CONFIG_SA1100_COLLIE) += collie.o +obj-$(CONFIG_SA1100_H3100) += h3600.o obj-$(CONFIG_SA1100_H3600) += h3600.o obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 8f5c13f..295e25d 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/unwind.h> #include "proc-macros.S" @@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range) * - the Icache does not read data from the write buffer */ ENTRY(v6_coherent_user_range) - + UNWIND(.fnstart ) #ifdef HARVARD_CACHE bic r0, r0, #CACHE_LINE_SIZE - 1 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D line +1: + USER( mcr p15, 0, r0, c7, c10, 1 ) @ clean D line add r0, r0, #CACHE_LINE_SIZE +2: cmp r0, r1 blo 1b #endif @@ -143,6 +146,19 @@ ENTRY(v6_coherent_user_range) mov pc, lr /* + * Fault handling for the cache operation above. If the virtual address in r0 + * isn't mapped, just try the next page. + */ +9001: + mov r0, r0, lsr #12 + mov r0, r0, lsl #12 + add r0, r0, #4096 + b 2b + UNWIND(.fnend ) +ENDPROC(v6_coherent_user_range) +ENDPROC(v6_coherent_kern_range) + +/* * v6_flush_kern_dcache_page(kaddr) * * Ensure that the data held in the page kaddr is written back diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index bda0ec3..e1bd975 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -13,6 +13,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/unwind.h> #include "proc-macros.S" @@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range) * - the Icache does not read data from the write buffer */ ENTRY(v7_coherent_user_range) + UNWIND(.fnstart ) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 -1: mcr p15, 0, r0, c7, c11, 1 @ clean D line to the point of unification +1: + USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification dsb - mcr p15, 0, r0, c7, c5, 1 @ invalidate I line + USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line add r0, r0, r2 +2: cmp r0, r1 blo 1b mov r0, #0 @@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range) dsb isb mov pc, lr + +/* + * Fault handling for the cache operation above. If the virtual address in r0 + * isn't mapped, just try the next page. + */ +9001: + mov r0, r0, lsr #12 + mov r0, r0, lsl #12 + add r0, r0, #4096 + b 2b + UNWIND(.fnend ) ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index bc0099d..d0d17b6 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte) page = pfn_to_page(pfn); mapping = page_mapping(page); - if (mapping) { #ifndef CONFIG_SMP - int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); - - if (dirty) - __flush_dcache_page(mapping, page); + if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + __flush_dcache_page(mapping, page); #endif - + if (mapping) { if (cache_is_vivt()) make_coherent(mapping, vma, addr, pfn); else if (vma->vm_flags & VM_EXEC) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index ae0e25f..10e0680 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) * down_read() */ might_sleep(); +#ifdef CONFIG_DEBUG_VM + if (!user_mode(regs) && + !search_exception_tables(regs->ARM_pc)) + goto no_context; +#endif } fault = __do_page_fault(mm, addr, fsr, tsk); diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 73cae57..30f82fb 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type) if (!PageHighMem(page)) return page_address(page); + debug_kmap_atomic(type); + kmap = kmap_high_get(page); if (kmap) return kmap; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 877c492..40940d7 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) /* * Convert start_pfn/end_pfn to a struct page pointer. */ - start_pg = pfn_to_page(start_pfn); + start_pg = pfn_to_page(start_pfn - 1) + 1; end_pg = pfn_to_page(end_pfn); /* diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 11e73d9..f129efb 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -303,32 +303,21 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap2430() 0 #define cpu_is_omap3430() 0 -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() is_omap730() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap850 -# define cpu_is_omap850() is_omap850() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() 1 -# endif -#endif -#else -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap850 -# define cpu_is_omap850() 1 -# endif -#endif - /* * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 330 vs. 1510 and 1611B/5912 vs. 1710. + * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710. */ + +#if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap730 +# define cpu_is_omap730() is_omap730() +#endif + +#if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap850 +# define cpu_is_omap850() is_omap850() +#endif + #if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap310 # undef cpu_is_omap1510 @@ -433,3 +422,5 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); + +#endif diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h index 6271d85..fa64614 100644 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -135,6 +135,8 @@ struct powerdomain *pwrdm_lookup(const char *name); int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user), void *user); +int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user), + void *user); int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 57f7122..dc3fac3 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -47,7 +47,7 @@ * 'va': mpu virtual address * * 'c': contiguous memory area - * 'd': dicontiguous memory area + * 'd': discontiguous memory area * 'a': anonymous memory allocation * '()': optional feature * @@ -363,8 +363,9 @@ void *da_to_va(struct iommu *obj, u32 da) goto out; } va = area->va; - mutex_unlock(&obj->mmap_lock); out: + mutex_unlock(&obj->mmap_lock); + return va; } EXPORT_SYMBOL_GPL(da_to_va); @@ -398,7 +399,7 @@ static inline void sgtable_drain_vmalloc(struct sg_table *sgt) { /* * Actually this is not necessary at all, just exists for - * consistency of the code readibility. + * consistency of the code readability. */ BUG_ON(!sgt); } @@ -434,7 +435,7 @@ static inline void sgtable_drain_kmalloc(struct sg_table *sgt) { /* * Actually this is not necessary at all, just exists for - * consistency of the code readibility + * consistency of the code readability */ BUG_ON(!sgt); } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 925f647..75d1f26 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -270,7 +270,8 @@ void * omap_sram_push(void * start, unsigned long size) omap_sram_ceil -= size; omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *)); memcpy((void *)omap_sram_ceil, start, size); - flush_icache_range((unsigned long)start, (unsigned long)(start + size)); + flush_icache_range((unsigned long)omap_sram_ceil, + (unsigned long)(omap_sram_ceil + size)); return (void *)omap_sram_ceil; } diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 11117a7..4d36b78 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <linux/list.h> #include <linux/err.h> #include <linux/clk.h> diff --git a/arch/blackfin/ADI_BSD.txt b/arch/blackfin/ADI_BSD.txt new file mode 100644 index 0000000..501d0b6 --- /dev/null +++ b/arch/blackfin/ADI_BSD.txt @@ -0,0 +1,41 @@ +This BSD-Style License applies to a few files in ./arch/blackfin directory, +and is included here, so people understand which code they can use outside +the Linux kernel, in non-GPL based projects. + +Using the files released under the "ADI BSD" license, must comply with +these license terms. + +-------------------------------------------------------------------------- + +Copyright Analog Devices, Inc. + +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + - Neither the name of Analog Devices, Inc. nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + - The use of this software may or may not infringe the patent rights + of one or more patent holders. This license does not release you + from the requirement that you obtain separate licenses from these + patent holders to use this software. + +THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR +IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 9a01d44..ae6a60f 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -47,6 +47,9 @@ config GENERIC_HARDIRQS config GENERIC_IRQ_PROBE def_bool y +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + config GENERIC_GPIO def_bool y @@ -229,7 +232,7 @@ endchoice config SMP depends on BF561 - select GENERIC_TIME + select GENERIC_CLOCKEVENTS bool "Symmetric multi-processing support" ---help--- This enables support for systems with more than one CPU, @@ -613,12 +616,10 @@ comment "Kernel Timer/Scheduler" source kernel/Kconfig.hz config GENERIC_TIME - bool "Generic time" - default y + def_bool y config GENERIC_CLOCKEVENTS bool "Generic clock events" - depends on GENERIC_TIME default y choice @@ -653,6 +654,10 @@ config GPTMR0_CLOCKSOURCE depends on GENERIC_CLOCKEVENTS depends on !TICKSOURCE_GPTMR0 +config ARCH_USES_GETTIMEOFFSET + depends on !GENERIC_CLOCKEVENTS + def_bool y + source kernel/time/Kconfig comment "Misc" diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index 88f36d5..d27c627 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -1,3 +1,9 @@ +/* +Â * Copyright 2004-2009 Analog Devices Inc. +Â * +Â * Licensed under the GPL-2 or later. +Â */ + #ifndef __ARCH_BLACKFIN_ATOMIC__ #define __ARCH_BLACKFIN_ATOMIC__ diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index aef0594..10064f9 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -1,29 +1,9 @@ /* - * File: include/asm-blackfin/bfin-global.h - * Based on: - * Author: * - * Created: - * Description: Global extern defines for blackfin + * Global extern defines for blackfin * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2006-2009 Analog Devices Inc. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef _BFIN_GLOBAL_H_ diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index c281c63..ed4f8c6 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -3,8 +3,6 @@ * * Copyright 2004-2008 Analog Devices Inc. * - * Enter bugs at http://blackfin.uclinux.org/ - * * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h index 425ece6..abdb2af 100644 --- a/arch/blackfin/include/asm/bfin_rotary.h +++ b/arch/blackfin/include/asm/bfin_rotary.h @@ -1,6 +1,10 @@ /* * board initialization should put one of these structures into platform_data * and place the bfin-rotary onto platform_bus named "bfin-rotary". + * + * Copyright 2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ #ifndef _BFIN_ROTARY_H diff --git a/arch/blackfin/include/asm/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h index fccbb59..5248c13 100644 --- a/arch/blackfin/include/asm/bfin_simple_timer.h +++ b/arch/blackfin/include/asm/bfin_simple_timer.h @@ -1,3 +1,9 @@ +/* + * Copyright 2006-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _bfin_simple_timer_h_ #define _bfin_simple_timer_h_ diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index daffa71..a2ff3fb 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BLACKFIN_BITOPS_H #define _BLACKFIN_BITOPS_H diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h index 4d44395..eb7c144 100644 --- a/arch/blackfin/include/asm/blackfin.h +++ b/arch/blackfin/include/asm/blackfin.h @@ -1,6 +1,9 @@ /* - * Common header file for blackfin family of processors. + * Common header file for Blackfin family of processors. * +Â * Copyright 2004-2009 Analog Devices Inc. +Â * +Â * Licensed under the GPL-2 or later. */ #ifndef _BLACKFIN_H_ diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h index 655e495..6f4548a 100644 --- a/arch/blackfin/include/asm/bug.h +++ b/arch/blackfin/include/asm/bug.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BLACKFIN_BUG_H #define _BLACKFIN_BUG_H diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h index 3e69106..9558416 100644 --- a/arch/blackfin/include/asm/byteorder.h +++ b/arch/blackfin/include/asm/byteorder.h @@ -1,6 +1 @@ -#ifndef _BLACKFIN_BYTEORDER_H -#define _BLACKFIN_BYTEORDER_H - #include <linux/byteorder/little_endian.h> - -#endif /* _BLACKFIN_BYTEORDER_H */ diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h index 477050a..8542bc3 100644 --- a/arch/blackfin/include/asm/cache.h +++ b/arch/blackfin/include/asm/cache.h @@ -1,6 +1,9 @@ /* - * include/asm-blackfin/cache.h + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ + #ifndef __ARCH_BLACKFIN_CACHE_H #define __ARCH_BLACKFIN_CACHE_H @@ -35,10 +38,10 @@ #if defined(CONFIG_SMP) && \ !defined(CONFIG_BFIN_CACHE_COHERENT) -# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE) +# if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE) # define __ARCH_SYNC_CORE_ICACHE # endif -# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE) +# if defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE) # define __ARCH_SYNC_CORE_DCACHE # endif #ifndef __ASSEMBLY__ diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 7e55549e..af03a36 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/cacheflush.h - * Based on: include/asm-m68knommu/cacheflush.h - * Author: LG Soft India - * Copyright (C) 2004 Analog Devices Inc. - * Created: Tue Sep 21 2004 - * Description: Blackfin low-level cache routines adapted from the i386 - * and PPC versions by Greg Ungerer (gerg@snapgear.com) + * Blackfin low-level cache routines * - * Modified: + * Copyright 2004-2009 Analog Devices Inc. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _BLACKFIN_CACHEFLUSH_H diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h index 35f841b..8778e0f 100644 --- a/arch/blackfin/include/asm/cdef_LPBlackfin.h +++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h @@ -1,30 +1,8 @@ - /* - * File: include/asm-blackfin/mach-common/cdef_LPBlackfin.h - * Based on: - * Author: unknown - * COPYRIGHT 2005 Analog Devices - * Created: ? - * Description: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ +/* + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef _CDEF_LPBLACKFIN_H #define _CDEF_LPBLACKFIN_H diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h index 793581f..a23415b 100644 --- a/arch/blackfin/include/asm/checksum.h +++ b/arch/blackfin/include/asm/checksum.h @@ -1,9 +1,14 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * akbar.hussain@lineo.com + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BFIN_CHECKSUM_H #define _BFIN_CHECKSUM_H /* - * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com - * * computes the checksum of a memory block at buff, length len, * and adds in "sum" (32-bit) * diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h index 033bba9..f80dad5 100644 --- a/arch/blackfin/include/asm/clocks.h +++ b/arch/blackfin/include/asm/clocks.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/mach-common/clocks.h - * Based on: include/asm-blackfin/mach-bf537/bf537.h - * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * Common Clock definitions for various kernel files * - * Created: 25Jul07 - * Description: Common Clock definitions for various kernel files + * Copyright 2007-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef _BFIN_CLOCKS_H diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index f8a664f..5dffaf5 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/context.S - * Based on: - * Author: + * Copyright 2007-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ /* diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index d18d168..fda9626 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -1,30 +1,7 @@ /* - * File: include/asm-blackfin/cplb.h - * Based on: include/asm-blackfin/mach-bf537/bf537.h - * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * Copyright 2004-2009 Analog Devices Inc. * - * Created: 2000 - * Description: Common CPLB definitions for CPLB init - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef _CPLB_H diff --git a/arch/blackfin/include/asm/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h index 05b14a6..f315c83 100644 --- a/arch/blackfin/include/asm/cplbinit.h +++ b/arch/blackfin/include/asm/cplbinit.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/cplbinit.h - * Based on: - * Author: + * Common CPLB definitions for CPLB init * - * Created: - * Description: + * Copyright 2006-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __ASM_CPLBINIT_H__ diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index fadfa82..b191dc6 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -1,23 +1,8 @@ /* - * File: arch/blackfin/include/asm/cpu.h. - * Author: Philippe Gerum <rpm@xenomai.org> + * Copyright 2007-2009 Analog Devices Inc. + * Philippe Gerum <rpm@xenomai.org> * - * Copyright 2007 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __ASM_BLACKFIN_CPU_H diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index 6341eeb..2590646 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -1,32 +1,10 @@ - /* - * File: include/asm-blackfin/mach-common/def_LPBlackfin.h - * Based on: - * Author: unknown - * COPYRIGHT 2005 Analog Devices - * Created: ? - * Description: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */ +/* + * Blackfin core register bit & address definitions + * + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the ADI BSD license or GPL-2 (or later). + */ #ifndef _DEF_LPBLACKFIN_H #define _DEF_LPBLACKFIN_H diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index ed6b1f3..7a23d82 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BLACKFIN_DMA_MAPPING_H #define _BLACKFIN_DMA_MAPPING_H diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index 96e8208..925e66c 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -1,9 +1,11 @@ /* - * include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power - * Management Controller Driver. + * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver + * * Copyright (C) 2004-2008 Analog Device Inc. * + * Licensed under the GPL-2 */ + #ifndef _BLACKFIN_DPMC_H_ #define _BLACKFIN_DPMC_H_ diff --git a/arch/blackfin/include/asm/early_printk.h b/arch/blackfin/include/asm/early_printk.h index 53a762b..68a910d 100644 --- a/arch/blackfin/include/asm/early_printk.h +++ b/arch/blackfin/include/asm/early_printk.h @@ -1,27 +1,11 @@ /* - * File: include/asm-blackfin/early_printk.h - * Author: Robin Getz <rgetz@blackfin.uclinux.org + * function prototpyes for early printk * - * Created: 14Aug2007 - * Description: function prototpyes for early printk + * Copyright 2007-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Licensed under the GPL-2 or later. */ - #ifndef __ASM_EARLY_PRINTK_H__ #define __ASM_EARLY_PRINTK_H__ diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index c823e8e..8e0764c 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -1,4 +1,8 @@ -/* Changes made by LG Soft Oct 2004*/ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef __ASMBFIN_ELF_H #define __ASMBFIN_ELF_H diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h index 55b808f..a6886f6 100644 --- a/arch/blackfin/include/asm/entry.h +++ b/arch/blackfin/include/asm/entry.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef __BFIN_ENTRY_H #define __BFIN_ENTRY_H diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/asm/fcntl.h index 9c40371..8727b2b 100644 --- a/arch/blackfin/include/asm/fcntl.h +++ b/arch/blackfin/include/asm/fcntl.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BFIN_FCNTL_H #define _BFIN_FCNTL_H diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h index 32c4d49..73fe53e 100644 --- a/arch/blackfin/include/asm/fixed_code.h +++ b/arch/blackfin/include/asm/fixed_code.h @@ -1,5 +1,11 @@ -/* This file defines the fixed addresses where userspace programs can find - atomic code sequences. */ +/* + * This file defines the fixed addresses where userspace programs + * can find atomic code sequences. + * + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifndef __BFIN_ASM_FIXED_CODE_H__ #define __BFIN_ASM_FIXED_CODE_H__ diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h index 733a178..c1314c5 100644 --- a/arch/blackfin/include/asm/flat.h +++ b/arch/blackfin/include/asm/flat.h @@ -1,8 +1,9 @@ /* - * include/asm-blackfin/flat.h -- uClinux flat-format executables + * uClinux flat-format executables * - * Copyright (C) 2003, + * Copyright 2003-2009 Analog Devices Inc. * + * Licensed under the GPL-2 */ #ifndef __BLACKFIN_FLAT_H__ diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index fe13961..5b44d05 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/bfin_gpio.h - * Based on: - * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * Copyright 2006-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __ARCH_BLACKFIN_GPIO_H__ diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index 0b78b87..c078dd7 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef __BFIN_HARDIRQ_H #define __BFIN_HARDIRQ_H diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 37053ec..d1f5029 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BFIN_IO_H #define _BFIN_IO_H diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 42a15f5..e7c0623 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -1,17 +1,10 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. + * Copyright 2004-2009 Analog Devices Inc. + * 2003 HuTao + * 2002 Arcturus Networks Inc. (www.arcturusnetworks.com + * Ted Ma <mated@sympatico.ca> * - * Changed by HuTao Apr18, 2003 - * - * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- - * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle - * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle - * - * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> - * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) - * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + * Licensed under the GPL-2 */ #ifndef _BFIN_IRQ_H_ @@ -19,6 +12,8 @@ #include <linux/irqflags.h> +#include <mach/anomaly.h> + /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */ #include <mach/irq.h> diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h index 7d9e2d3..7fbe423 100644 --- a/arch/blackfin/include/asm/irq_handler.h +++ b/arch/blackfin/include/asm/irq_handler.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _IRQ_HANDLER_H #define _IRQ_HANDLER_H diff --git a/arch/blackfin/include/asm/l1layout.h b/arch/blackfin/include/asm/l1layout.h index 79dbefaa..c87e686 100644 --- a/arch/blackfin/include/asm/l1layout.h +++ b/arch/blackfin/include/asm/l1layout.h @@ -1,6 +1,9 @@ /* - * l1layout.h * Defines a layout of L1 scratchpad memory that userspace can rely on. + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ #ifndef _L1LAYOUT_H_ diff --git a/arch/blackfin/include/asm/linkage.h b/arch/blackfin/include/asm/linkage.h index 5a822bb..f7d6d47 100644 --- a/arch/blackfin/include/asm/linkage.h +++ b/arch/blackfin/include/asm/linkage.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef __ASM_LINKAGE_H #define __ASM_LINKAGE_H diff --git a/arch/blackfin/include/asm/mmu.h b/arch/blackfin/include/asm/mmu.h index dbfd686..26f6b70 100644 --- a/arch/blackfin/include/asm/mmu.h +++ b/arch/blackfin/include/asm/mmu.h @@ -1,8 +1,13 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * 2002 David McCullough <davidm@snapgear.com> + * + * Licensed under the GPL-2. + */ + #ifndef __MMU_H #define __MMU_H -/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */ - struct sram_list_struct { struct sram_list_struct *next; void *addr; diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h index 040410b..4a3be37 100644 --- a/arch/blackfin/include/asm/mmu_context.h +++ b/arch/blackfin/include/asm/mmu_context.h @@ -1,30 +1,7 @@ /* - * File: include/asm-blackfin/mmu_context.h - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __BLACKFIN_MMU_CONTEXT_H__ diff --git a/arch/blackfin/include/asm/module.h b/arch/blackfin/include/asm/module.h index e3128df..9c1cfff 100644 --- a/arch/blackfin/include/asm/module.h +++ b/arch/blackfin/include/asm/module.h @@ -1,3 +1,9 @@ +/* +Â * Copyright 2004-2008 Analog Devices Inc. +Â * +Â * Licensed under the GPL-2 or later. +Â */ + #ifndef _ASM_BFIN_MODULE_H #define _ASM_BFIN_MODULE_H diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h index 5cc641c..f726e3a 100644 --- a/arch/blackfin/include/asm/mutex.h +++ b/arch/blackfin/include/asm/mutex.h @@ -4,6 +4,10 @@ * TODO: implement optimized primitives instead, or leave the generic * implementation in place, or pick the atomic_xchg() based generic * implementation. (see asm-generic/mutex-xchg.h for details) + * + * Copyright 2006-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ #ifndef _ASM_MUTEX_H diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h index afbaafa..3ae8b56 100644 --- a/arch/blackfin/include/asm/nand.h +++ b/arch/blackfin/include/asm/nand.h @@ -1,13 +1,9 @@ -/* linux/include/asm-blackfin/nand.h - * - * Copyright (c) 2007 Analog Devices, Inc. - * Bryan Wu <bryan.wu@analog.com> - * +/* * BF5XX - NAND flash controller platfrom_device info * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright 2007-2008 Analog Devices, Inc. + * + * Licensed under the GPL-2 */ /* struct bf5xx_nand_platform diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 29dcf75..944a07c 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -1,3 +1,9 @@ +/* +Â * Copyright 2004-2009 Analog Devices Inc. +Â * +Â * Licensed under the GPL-2 or later. +Â */ + #ifndef _BLACKFIN_PAGE_H #define _BLACKFIN_PAGE_H diff --git a/arch/blackfin/include/asm/page_offset.h b/arch/blackfin/include/asm/page_offset.h index cbaff24..d06a89b8 100644 --- a/arch/blackfin/include/asm/page_offset.h +++ b/arch/blackfin/include/asm/page_offset.h @@ -1,5 +1,10 @@ - -/* This handles the memory map.. */ +/* + * This handles the memory map + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #ifdef CONFIG_BLACKFIN #define PAGE_OFFSET_RAW 0x00000000 diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index a6f9569..d49bb26 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -1,23 +1,8 @@ /* - * File: arch/blackfin/include/asm/pda.h - * Author: Philippe Gerum <rpm@xenomai.org> + * Copyright 2007-2009 Analog Devices Inc. + * Philippe Gerum <rpm@xenomai.org> * - * Copyright 2007 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef _ASM_BLACKFIN_PDA_H diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h index 783c8f7..821c699 100644 --- a/arch/blackfin/include/asm/pgtable.h +++ b/arch/blackfin/include/asm/pgtable.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BLACKFIN_PGTABLE_H #define _BLACKFIN_PGTABLE_H @@ -92,6 +98,12 @@ extern unsigned int kobjsize(const void *objp); #define VMALLOC_START 0 #define VMALLOC_END 0xffffffff +/* provide a special get_unmapped_area for framebuffer mmaps of nommu */ +extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long, + unsigned long, unsigned long, + unsigned long); +#define HAVE_ARCH_FB_UNMAPPED_AREA + #include <asm-generic/pgtable.h> #endif /* _BLACKFIN_PGTABLE_H */ diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/asm/poll.h index a055667..072d896 100644 --- a/arch/blackfin/include/asm/poll.h +++ b/arch/blackfin/include/asm/poll.h @@ -1,3 +1,10 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + * + */ + #ifndef __BFIN_POLL_H #define __BFIN_POLL_H diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index 88eb5c0..edd8ef3 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -1,6 +1,9 @@ /* - * Common header file for blackfin family of processors. + * Common header file for Blackfin family of processors * +Â * Copyright 2007-2008 Analog Devices Inc. +Â * +Â * Licensed under the GPL-2 or later. */ #ifndef _PORTMUX_H_ diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h index 80c9d64..41bc187 100644 --- a/arch/blackfin/include/asm/posix_types.h +++ b/arch/blackfin/include/asm/posix_types.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef __ARCH_BFIN_POSIX_TYPES_H #define __ARCH_BFIN_POSIX_TYPES_H diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index a36ad8d..aea8802 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef __ASM_BFIN_PROCESSOR_H #define __ASM_BFIN_PROCESSOR_H diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index e3f086d..27290c9 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BFIN_PTRACE_H #define _BFIN_PTRACE_H diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h index ae4dae1..1f5381f 100644 --- a/arch/blackfin/include/asm/sections.h +++ b/arch/blackfin/include/asm/sections.h @@ -1,3 +1,9 @@ +/* +Â * Copyright 2004-2009 Analog Devices Inc. +Â * +Â * Licensed under the GPL-2 or later. +Â */ + #ifndef _BLACKFIN_SECTIONS_H #define _BLACKFIN_SECTIONS_H diff --git a/arch/blackfin/include/asm/segment.h b/arch/blackfin/include/asm/segment.h index 02cfd09..f8e1984 100644 --- a/arch/blackfin/include/asm/segment.h +++ b/arch/blackfin/include/asm/segment.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BFIN_SEGMENT_H #define _BFIN_SEGMENT_H diff --git a/arch/blackfin/include/asm/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h index ce00b03..ce4081a 100644 --- a/arch/blackfin/include/asm/sigcontext.h +++ b/arch/blackfin/include/asm/sigcontext.h @@ -1,3 +1,9 @@ +/* +Â * Copyright 2004-2008 Analog Devices Inc. +Â * +Â * Licensed under the GPL-2 or later. +Â */ + #ifndef _ASM_BLACKFIN_SIGCONTEXT_H #define _ASM_BLACKFIN_SIGCONTEXT_H diff --git a/arch/blackfin/include/asm/siginfo.h b/arch/blackfin/include/asm/siginfo.h index eca4565..3e81306 100644 --- a/arch/blackfin/include/asm/siginfo.h +++ b/arch/blackfin/include/asm/siginfo.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BFIN_SIGINFO_H #define _BFIN_SIGINFO_H diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index 118deee..6a0fe94 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -1,23 +1,8 @@ /* - * File: arch/blackfin/include/asm/smp.h - * Author: Philippe Gerum <rpm@xenomai.org> + * Copyright 2007-2009 Analog Devices Inc. + * Philippe Gerum <rpm@xenomai.org> * - * Copyright 2007 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __ASM_BLACKFIN_SMP_H diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h index d6ff4b5..b0c7f0e 100644 --- a/arch/blackfin/include/asm/spinlock.h +++ b/arch/blackfin/include/asm/spinlock.h @@ -1,3 +1,9 @@ +/* +Â * Copyright 2004-2009 Analog Devices Inc. +Â * +Â * Licensed under the GPL-2 or later. +Â */ + #ifndef __BFIN_SPINLOCK_H #define __BFIN_SPINLOCK_H diff --git a/arch/blackfin/include/asm/spinlock_types.h b/arch/blackfin/include/asm/spinlock_types.h index b1e3c4c..be75762 100644 --- a/arch/blackfin/include/asm/spinlock_types.h +++ b/arch/blackfin/include/asm/spinlock_types.h @@ -1,3 +1,9 @@ +/* + * Copyright 2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef __ASM_SPINLOCK_TYPES_H #define __ASM_SPINLOCK_TYPES_H diff --git a/arch/blackfin/include/asm/stat.h b/arch/blackfin/include/asm/stat.h index d2b6f11..2e27665 100644 --- a/arch/blackfin/include/asm/stat.h +++ b/arch/blackfin/include/asm/stat.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2006 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + #ifndef _BFIN_STAT_H #define _BFIN_STAT_H diff --git a/arch/blackfin/include/asm/string.h b/arch/blackfin/include/asm/string.h index 321f4d9..d7f0ccb 100644 --- a/arch/blackfin/include/asm/string.h +++ b/arch/blackfin/include/asm/string.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BLACKFIN_STRING_H_ #define _BLACKFIN_STRING_H_ diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/asm/swab.h index d442113..89de650 100644 --- a/arch/blackfin/include/asm/swab.h +++ b/arch/blackfin/include/asm/swab.h @@ -1,3 +1,9 @@ +/* + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BLACKFIN_SWAB_H #define _BLACKFIN_SWAB_H diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 85e8f16..dde19b1 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -1,34 +1,8 @@ /* - * File: include/asm/system.h - * Based on: - * Author: Tony Kou (tonyko@lineo.ca) - * Copyright (c) 2002 Arcturus Networks Inc. - * (www.arcturusnetworks.com) - * Copyright (c) 2003 Metrowerks (www.metrowerks.com) - * Copyright (c) 2004 Analog Device Inc. - * Created: 25Jan2001 - Tony Kou - * Description: system.h include file + * Copyright 2004-2009 Analog Devices Inc. + * Tony Kou (tonyko@lineo.ca) * - * Modified: 22Sep2006 - Robin Getz - * - move include blackfin.h down, so I can get access to - * irq functions in other include files. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _BLACKFIN_SYSTEM_H diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 2bbfdd9..afb3a86 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -1,27 +1,7 @@ /* - * File: include/asm-blackfin/thread_info.h - * Based on: include/asm-m68knommu/thread_info.h - * Author: LG Soft India - * Copyright (C) 2004-2005 Analog Devices Inc. - * Created: Tue Sep 21 2004 - * Description: Blackfin low-level thread information - * Modified: - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2009 Analog Devices Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _ASM_THREAD_INFO_H diff --git a/arch/blackfin/include/asm/tlb.h b/arch/blackfin/include/asm/tlb.h index 89a12ee..a74ae08 100644 --- a/arch/blackfin/include/asm/tlb.h +++ b/arch/blackfin/include/asm/tlb.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BLACKFIN_TLB_H #define _BLACKFIN_TLB_H diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h index 312b596..609ad3c 100644 --- a/arch/blackfin/include/asm/trace.h +++ b/arch/blackfin/include/asm/trace.h @@ -1,6 +1,9 @@ /* - * Common header file for blackfin family of processors. + * header file for hardware trace functions * + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ #ifndef _BLACKFIN_TRACE_ diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h index 3cdc454..9fe0da6 100644 --- a/arch/blackfin/include/asm/traps.h +++ b/arch/blackfin/include/asm/traps.h @@ -1,13 +1,10 @@ /* - * linux/include/asm/traps.h + * Copyright 2004-2009 Analog Devices Inc. + * 2001 Lineo, Inc + * Tony Kou + * 1993 Hamish Macdonald * - * Copyright (C) 1993 Hamish Macdonald - * - * Lineo, Inc Jul 2001 Tony Kou - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. + * Licensed under the GPL-2 */ #ifndef _BFIN_TRAPS_H diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index 2f469a1..c03b853 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -1,4 +1,7 @@ -/* Changes made by Lineo Inc. May 2001 +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. * * Based on: include/asm-m68knommu/uaccess.h */ diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 02b1529..779be02 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -1,3 +1,9 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef __ASM_BFIN_UNISTD_H #define __ASM_BFIN_UNISTD_H /* diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c index f05d1b9..bd32c09 100644 --- a/arch/blackfin/kernel/asm-offsets.c +++ b/arch/blackfin/kernel/asm-offsets.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/kernel/asm-offsets.c - * Based on: - * Author: + * generate definitions needed by assembly language modules * - * Created: - * Description: generate definitions needed by assembly language modules. + * Copyright 2004-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/stddef.h> diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 384868d..1f17021 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -2,6 +2,7 @@ * bfin_dma_5xx.c - Blackfin DMA implementation * * Copyright 2004-2008 Analog Devices Inc. + * * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index fc4681c..22705ee 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/kernel/bfin_gpio.c - * Based on: - * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * GPIO Abstraction Layer * - * Created: - * Description: GPIO Abstraction Layer + * Copyright 2006-2009 Analog Devices Inc. * - * Modified: - * Copyright 2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/delay.h> diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index 36193ee..f7b9cdc 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -1,25 +1,11 @@ /* * Blackfin CPLB initialization * - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2008-2009 Analog Devices Inc. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ + #include <linux/module.h> #include <asm/blackfin.h> diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 8e1e9e9..69e0e53 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -1,22 +1,11 @@ /* - * Blackfin CPLB exception handling. - * Copyright 2004-2007 Analog Devices Inc. + * Blackfin CPLB exception handling for when MPU in on * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright 2008-2009 Analog Devices Inc. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ + #include <linux/module.h> #include <linux/mm.h> diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 5d8ad503..fd9a2f3 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -1,24 +1,9 @@ /* * Blackfin CPLB initialization * - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2007-2009 Analog Devices Inc. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index d9ea46c..5b88861 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -1,26 +1,14 @@ /* - * File: arch/blackfin/kernel/cplb-nompu-c/cplbmgr.c * Based on: arch/blackfin/kernel/cplb-mpu/cplbmgr.c * Author: Michael McTernan <mmcternan@airvana.com> * - * Created: 01Nov2008 * Description: CPLB miss handler. * * Modified: * Copyright 2008 Airvana Inc. - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2008-2009 Analog Devices Inc. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Licensed under the GPL-2 or later */ #include <linux/kernel.h> diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c index 64d7830..0bdaa51 100644 --- a/arch/blackfin/kernel/cplbinfo.c +++ b/arch/blackfin/kernel/cplbinfo.c @@ -2,6 +2,7 @@ * arch/blackfin/kernel/cplbinfo.c - display CPLB status * * Copyright 2004-2008 Analog Devices Inc. + * * Licensed under the GPL-2 or later. */ @@ -111,24 +112,21 @@ static const struct seq_operations cplbinfo_sops = { .show = cplbinfo_show, }; +#define CPLBINFO_DCPLB_FLAG 0x80000000 + static int cplbinfo_open(struct inode *inode, struct file *file) { - char buf[256], *path, *p; + struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode); + char cplb_type; unsigned int cpu; - char *s_cpu, *s_cplb; int ret; struct seq_file *m; struct cplbinfo_data *cdata; - path = d_path(&file->f_path, buf, sizeof(buf)); - if (IS_ERR(path)) - return PTR_ERR(path); - s_cpu = strstr(path, "/cpu"); - s_cplb = strrchr(path, '/'); - if (!s_cpu || !s_cplb) - return -EINVAL; + cpu = (unsigned int)pde->data; + cplb_type = cpu & CPLBINFO_DCPLB_FLAG ? 'D' : 'I'; + cpu &= ~CPLBINFO_DCPLB_FLAG; - cpu = simple_strtoul(s_cpu + 4, &p, 10); if (!cpu_online(cpu)) return -ENODEV; @@ -139,7 +137,7 @@ static int cplbinfo_open(struct inode *inode, struct file *file) cdata = m->private; cdata->pos = 0; - cdata->cplb_type = toupper(s_cplb[1]); + cdata->cplb_type = cplb_type; cplbinfo_seq_init(cdata, cpu); return 0; @@ -168,8 +166,10 @@ static int __init cplbinfo_init(void) if (!cpu_dir) return -ENOMEM; - proc_create("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops); - proc_create("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops); + proc_create_data("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops, + (void *)cpu); + proc_create_data("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops, + (void *)(cpu | CPLBINFO_DCPLB_FLAG)); } return 0; diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index 2f62a9f..e74e74d 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/kernel/dma-mapping.c - * Based on: - * Author: + * Dynamic DMA mapping support * - * Created: - * Description: Dynamic DMA mapping support. + * Copyright 2005-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/types.h> diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 931c78b..84ed837 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -1,25 +1,10 @@ /* - * File: arch/blackfin/kernel/early_printk.c - * Based on: arch/x86_64/kernel/early_printk.c - * Author: Robin Getz <rgetz@blackfin.uclinux.org + * allow a console to be used for early printk + * derived from arch/x86/kernel/early_printk.c * - * Created: 14Aug2007 - * Description: allow a console to be used for early printk + * Copyright 2007-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Licensed under the GPL-2 */ #include <linux/kernel.h> diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index 3f8769b..f27dc22 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/entry.S - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/linkage.h> diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S index 0d2d9e0..0565917 100644 --- a/arch/blackfin/kernel/fixed_code.S +++ b/arch/blackfin/kernel/fixed_code.S @@ -6,7 +6,12 @@ * These are aligned to 16 bytes, so that we have some space to replace * these sequences with something else (e.g. kernel traps if we ever do * BF561 SMP). + * + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ + #include <linux/linkage.h> #include <linux/init.h> #include <linux/unistd.h> diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c index d188b24..a88dadd 100644 --- a/arch/blackfin/kernel/flat.c +++ b/arch/blackfin/kernel/flat.c @@ -1,21 +1,7 @@ /* - * arch/blackfin/kernel/flat.c + * Copyright 2007 Analog Devices Inc. * - * Copyright (C) 2007 Analog Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Licensed under the GPL-2. */ #include <linux/module.h> diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c index c26c34d..118c5b9 100644 --- a/arch/blackfin/kernel/init_task.c +++ b/arch/blackfin/kernel/init_task.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/init_task.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/mm.h> diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 4b5fd36..db9f9c9 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/irqchip.c - * Based on: - * Author: + * Copyright 2005-2009 Analog Devices Inc. * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/kernel_stat.h> diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c index 67fc7a5..a6dfa6b 100644 --- a/arch/blackfin/kernel/module.c +++ b/arch/blackfin/kernel/module.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/module.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #define pr_fmt(fmt) "module %s: " fmt diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index f5b2861..430ae39 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/kernel/process.c - * Based on: - * Author: + * Blackfin architecture-dependent process handling * - * Created: - * Description: Blackfin architecture-dependent process handling. + * Copyright 2004-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/module.h> diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 30f4828..0982b5d 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -1,30 +1,8 @@ /* - * File: arch/blackfin/kernel/ptrace.c - * Based on: Taken from linux/kernel/ptrace.c - * Author: linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds + * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds + * these modifications are Copyright 2004-2009 Analog Devices Inc. * - * Created: 1/23/92 - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 */ #include <linux/kernel.h> diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 369535b..c202a44 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -1,9 +1,5 @@ /* - * arch/blackfin/kernel/setup.c - * - * Copyright 2004-2006 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2009 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c index 8b8c710..557e9fe 100644 --- a/arch/blackfin/kernel/shadow_console.c +++ b/arch/blackfin/kernel/shadow_console.c @@ -4,8 +4,6 @@ * * Copyright 2009 Analog Devices Inc. * - * Enter bugs at http://blackfin.uclinux.org/ - * * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c index dbc3bbf..9d90c18 100644 --- a/arch/blackfin/kernel/signal.c +++ b/arch/blackfin/kernel/signal.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/signal.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/signal.h> diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index 3da60fb..afcef12 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -1,32 +1,10 @@ /* - * File: arch/blackfin/kernel/sys_bfin.c - * Based on: - * Author: + * contains various random system calls that have a non-standard + * calling sequence on the Linux/Blackfin platform. * - * Created: - * Description: This file contains various random system calls that - * have a non-standard calling sequence on the Linux/bfin - * platform. + * Copyright 2004-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/spinlock.h> @@ -91,3 +69,14 @@ asmlinkage void *sys_dma_memcpy(void *dest, const void *src, size_t len) { return safe_dma_memcpy(dest, src, len); } + +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +#include <linux/fb.h> +unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct fb_info *info = filp->private_data; + return (unsigned long)info->screen_base; +} +EXPORT_SYMBOL(get_fb_unmapped_area); +#endif diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index f971576..359cfb1 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -1,13 +1,13 @@ /* - * linux/arch/kernel/time-ts.c - * * Based on arm clockevents implementation and old bfin time tick. * - * Copyright(C) 2008, GeoTechnologies, Vitja Makarov + * Copyright 2008-2009 Analog Devics Inc. + * 2008 GeoTechnologies + * Vitja Makarov * - * This code is licenced under the GPL version 2. For details see - * kernel-base/COPYING. + * Licensed under the GPL-2 */ + #include <linux/module.h> #include <linux/profile.h> #include <linux/interrupt.h> diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index adb54aa..bd3b53d 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -14,6 +14,7 @@ #include <linux/time.h> #include <linux/irq.h> #include <linux/delay.h> +#include <linux/sched.h> #include <asm/blackfin.h> #include <asm/time.h> @@ -81,11 +82,11 @@ time_sched_init(irqreturn_t(*timer_routine) (int, void *)) #endif } +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET /* * Should return useconds since last timer tick */ -#ifndef CONFIG_GENERIC_TIME -static unsigned long gettimeoffset(void) +u32 arch_gettimeoffset(void) { unsigned long offset; unsigned long clocks_per_jiffy; @@ -184,65 +185,6 @@ void __init time_init(void) time_sched_init(timer_interrupt); } -#ifndef CONFIG_GENERIC_TIME -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = gettimeoffset(); - sec = xtime.tv_sec; - usec += (xtime.tv_nsec / NSEC_PER_USEC); - } - while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - while (usec >= USEC_PER_SEC) { - usec -= USEC_PER_SEC; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set the xtime.tv_usec - * correctly. However, the value in this location is - * is value at the last tick. - * Discover what correction gettimeofday - * would have done, and then undo it! - */ - nsec -= (gettimeoffset() * NSEC_PER_USEC); - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - - return 0; -} -EXPORT_SYMBOL(do_settimeofday); -#endif /* !CONFIG_GENERIC_TIME */ - /* * Scheduler clock - returns current time in nanosec units. */ diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 56464cb..6b7325d 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/traps.c - * Based on: - * Author: Hamish Macdonald + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: uses S/W interrupt 15 for the system calls - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #include <linux/bug.h> diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index ffd90fb..10e1253 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/kernel/vmlinux.lds.S - * Based on: none - original work - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: Tue Sep 21 2004 - * Description: Master linker script for blackfin architecture - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #define VMLINUX_SYMBOL(_sym_) _##_sym_ diff --git a/arch/blackfin/lib/ashldi3.c b/arch/blackfin/lib/ashldi3.c index a8c279e..ab69d87 100644 --- a/arch/blackfin/lib/ashldi3.c +++ b/arch/blackfin/lib/ashldi3.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/ashldi3.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include "gcclib.h" diff --git a/arch/blackfin/lib/ashrdi3.c b/arch/blackfin/lib/ashrdi3.c index a0d3419..b5b351e 100644 --- a/arch/blackfin/lib/ashrdi3.c +++ b/arch/blackfin/lib/ashrdi3.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/ashrdi3.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include "gcclib.h" diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c index cd605e7..c62969d 100644 --- a/arch/blackfin/lib/checksum.c +++ b/arch/blackfin/lib/checksum.c @@ -1,32 +1,12 @@ /* - * File: arch/blackfin/lib/checksum.c - * Based on: none - original work - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. + * Licensed under the GPL-2 or later. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * An implementation of the TCP/IP protocol suite for the LINUX operating + * system. INET is implemented using the BSD Socket interface as the + * means of communication with the user level. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/module.h> diff --git a/arch/blackfin/lib/divsi3.S b/arch/blackfin/lib/divsi3.S index 2ac59c7..f89c5a4 100644 --- a/arch/blackfin/lib/divsi3.S +++ b/arch/blackfin/lib/divsi3.S @@ -1,10 +1,9 @@ /* - * File: arch/blackfin/lib/divsi3.S - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: 16 / 32 bit signed division. + * Licensed under the ADI BSD license or the GPL-2 (or later) + * + * 16 / 32 bit signed division. * Special cases : * 1) If(numerator == 0) * return 0 @@ -22,25 +21,6 @@ * R0 - Quotient (o) * Registers Used : R2-R7,P0-P2 * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ .global ___divsi3; diff --git a/arch/blackfin/lib/gcclib.h b/arch/blackfin/lib/gcclib.h index 9ccd39a..724f07f 100644 --- a/arch/blackfin/lib/gcclib.h +++ b/arch/blackfin/lib/gcclib.h @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/gcclib.h - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #define BITS_PER_UNIT 8 diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c index e57bf6f..53f1741 100644 --- a/arch/blackfin/lib/lshrdi3.c +++ b/arch/blackfin/lib/lshrdi3.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/lshrdi3.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include "gcclib.h" diff --git a/arch/blackfin/lib/memchr.S b/arch/blackfin/lib/memchr.S index 5da4281..542e40f 100644 --- a/arch/blackfin/lib/memchr.S +++ b/arch/blackfin/lib/memchr.S @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/memchr.S - * Based on: - * Author: + * Copyright 2005-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S index 219fa28..ce5b9f1 100644 --- a/arch/blackfin/lib/memcmp.S +++ b/arch/blackfin/lib/memcmp.S @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/memcmp.S - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S index e654a18..c31bf22 100644 --- a/arch/blackfin/lib/memcpy.S +++ b/arch/blackfin/lib/memcpy.S @@ -1,36 +1,13 @@ /* - * File: arch/blackfin/lib/memcpy.S - * Based on: - * Author: + * internal version of memcpy(), issued by the compiler to copy blocks of + * data around. This is really memmove() - it has to be able to deal with + * possible overlaps, because that ambiguity is when the compiler gives up + * and calls a function. We have our own, internal version so that we get + * something we trust, even if the user has redefined the normal symbol. * - * Created: - * Description: internal version of memcpy(), issued by the compiler - * to copy blocks of data around. - * This is really memmove() - it has to be able to deal with - * possible overlaps, because that ambiguity is when the compiler - * gives up and calls a function. We have our own, internal version - * so that we get something we trust, even if the user has redefined - * the normal symbol. + * Copyright 2004-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S index 33f8653..80c240a 100644 --- a/arch/blackfin/lib/memmove.S +++ b/arch/blackfin/lib/memmove.S @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/memmove.S - * Based on: - * Author: + * Copyright 2005-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S index 8159136..c30d99b 100644 --- a/arch/blackfin/lib/memset.S +++ b/arch/blackfin/lib/memset.S @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/memset.S - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/modsi3.S b/arch/blackfin/lib/modsi3.S index ca1dd39..8b0c7d4 100644 --- a/arch/blackfin/lib/modsi3.S +++ b/arch/blackfin/lib/modsi3.S @@ -1,36 +1,12 @@ /* - * File: arch/blackfin/lib/modsi3.S - * Based on: - * Author: + * This program computes 32 bit signed remainder. It calls div32 function + * for quotient estimation. + * Registers in: R0, R1 = Numerator/ Denominator + * Registers out: R0 = Remainder * - * Created: - * Description: This program computes 32 bit signed remainder. It calls div32 function - * for quotient estimation. + * Copyright 2004-2009 Analog Devices Inc. * - * Registers used : - * Numerator/ Denominator in R0, R1 - * R0 - returns remainder. - * R2-R7 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the ADI BSD license or the GPL-2 (or later) */ .global ___modsi3; diff --git a/arch/blackfin/lib/muldi3.S b/arch/blackfin/lib/muldi3.S index abde120..953a38a 100644 --- a/arch/blackfin/lib/muldi3.S +++ b/arch/blackfin/lib/muldi3.S @@ -1,3 +1,9 @@ +/* + * Copyright 2008 Analog Devices Inc. + * + * Licensed under the ADI BSD license or the GPL-2 (or later) + */ + .align 2 .global ___muldi3; .type ___muldi3, STT_FUNC; diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S index 4685b7a..250f4d4 100644 --- a/arch/blackfin/lib/outs.S +++ b/arch/blackfin/lib/outs.S @@ -1,30 +1,11 @@ /* - * File: arch/blackfin/lib/outs.S - * Based on: - * Author: Bas Vermeulen <bas@buyways.nl> + * Implementation of outs{bwl} for BlackFin processors using zero overhead loops. * - * Created: Tue Mar 22 15:27:24 CEST 2005 - * Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops. + * Copyright 2005-2009 Analog Devices Inc. + * 2005 BuyWays BV + * Bas Vermeulen <bas@buyways.nl> * - * Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl> - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2. */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/smulsi3_highpart.S b/arch/blackfin/lib/smulsi3_highpart.S index e383cd3..99ee8c5 100644 --- a/arch/blackfin/lib/smulsi3_highpart.S +++ b/arch/blackfin/lib/smulsi3_highpart.S @@ -1,3 +1,9 @@ +/* + * Copyright 2007 Analog Devices Inc. + * + * Licensed under the ADI BSD license or the GPL-2 (or later) + */ + .align 2 .global ___smulsi3_highpart; .type ___smulsi3_highpart, STT_FUNC; diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S index 58fd96d..97e9043 100644 --- a/arch/blackfin/lib/udivsi3.S +++ b/arch/blackfin/lib/udivsi3.S @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/lib/udivsi3.S - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/umodsi3.S b/arch/blackfin/lib/umodsi3.S index 4f2b76e..168eba7 100644 --- a/arch/blackfin/lib/umodsi3.S +++ b/arch/blackfin/lib/umodsi3.S @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/lib/umodsi3.S - * Based on: - * Author: + * libgcc1 routines for Blackfin 5xx * - * Created: - * Description: libgcc1 routines for Blackfin 5xx + * Copyright 2004-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifdef CONFIG_ARITHMETIC_OPS_L1 diff --git a/arch/blackfin/lib/umulsi3_highpart.S b/arch/blackfin/lib/umulsi3_highpart.S index 67b7993..051824a 100644 --- a/arch/blackfin/lib/umulsi3_highpart.S +++ b/arch/blackfin/lib/umulsi3_highpart.S @@ -1,3 +1,9 @@ +/* + * Copyright 2007 Analog Devices Inc. + * + * Licensed under the ADI BSD license or the GPL-2 (or later) + */ + .align 2 .global ___umulsi3_highpart; .type ___umulsi3_highpart, STT_FUNC; diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 03e4a99..01975c0 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf518/boards/ezbrd.c - * Based on: arch/blackfin/mach-bf527/boards/ezbrd.c - * Author: Bryan Wu <cooloney@kernel.org> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -571,19 +549,6 @@ static struct platform_device bf51x_sdh_device = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_100, 400000000), @@ -660,8 +625,6 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezbrd_flash_device, #endif - - &bfin_gpios_device, }; static int __init ezbrd_init(void) diff --git a/arch/blackfin/mach-bf518/dma.c b/arch/blackfin/mach-bf518/dma.c index 698e88c..78b4360 100644 --- a/arch/blackfin/mach-bf518/dma.c +++ b/arch/blackfin/mach-bf518/dma.c @@ -1,31 +1,11 @@ /* - * File: arch/blackfin/mach-bf518/dma.c - * Based on: - * Author: Bryan Wu <cooloney@kernel.org> + * the simple DMA Implementation for Blackfin * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin + * Copyright 2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ + #include <linux/module.h> #include <asm/blackfin.h> diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h index 78da1a0..856b330 100644 --- a/arch/blackfin/mach-bf518/include/mach/bf518.h +++ b/arch/blackfin/mach-bf518/include/mach/bf518.h @@ -1,30 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/bf518.h - * Based on: include/asm-blackfin/mach-bf527/bf527.h - * Author: Michael Hennerich (michael.hennerich@analog.com) + * Copyright 2008 Analog Devices Inc. * - * Created: - * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF518 - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __MACH_BF518_H__ diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index dbade93..970d310 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf518/bfin_serial_5xx.h - * based on: - * author: + * Copyright 2008-2009 Analog Devices Inc. * - * created: - * description: - * blackfin serial driver head file - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later */ #include <linux/serial.h> diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h index 83421d3..6cfb246 100644 --- a/arch/blackfin/mach-bf518/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/blackfin.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _MACH_BLACKFIN_H_ diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h index 820c13c..493020d 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/cdefbf512.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: system mmr register map - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF512_H diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h index dfe492d..e1d9991 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/cdefbf514.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: system mmr register map - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF514_H diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h index 14df43d..6b364ed 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/cdefbf516.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: system mmr register map - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF516_H diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h index bafb370..929b906 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/cdefbf518.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: system mmr register map - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF518_H @@ -211,6 +186,47 @@ #define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) #define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) +#define bfin_read_EMAC_PTP_CTL() bfin_read16(EMAC_PTP_CTL) +#define bfin_write_EMAC_PTP_CTL(val) bfin_write16(EMAC_PTP_CTL, val) +#define bfin_read_EMAC_PTP_IE() bfin_read16(EMAC_PTP_IE) +#define bfin_write_EMAC_PTP_IE(val) bfin_write16(EMAC_PTP_IE, val) +#define bfin_read_EMAC_PTP_ISTAT() bfin_read16(EMAC_PTP_ISTAT) +#define bfin_write_EMAC_PTP_ISTAT(val) bfin_write16(EMAC_PTP_ISTAT, val) +#define bfin_read_EMAC_PTP_FOFF() bfin_read32(EMAC_PTP_FOFF) +#define bfin_write_EMAC_PTP_FOFF(val) bfin_write32(EMAC_PTP_FOFF, val) +#define bfin_read_EMAC_PTP_FV1() bfin_read32(EMAC_PTP_FV1) +#define bfin_write_EMAC_PTP_FV1(val) bfin_write32(EMAC_PTP_FV1, val) +#define bfin_read_EMAC_PTP_FV2() bfin_read32(EMAC_PTP_FV2) +#define bfin_write_EMAC_PTP_FV2(val) bfin_write32(EMAC_PTP_FV2, val) +#define bfin_read_EMAC_PTP_FV3() bfin_read32(EMAC_PTP_FV3) +#define bfin_write_EMAC_PTP_FV3(val) bfin_write32(EMAC_PTP_FV3, val) +#define bfin_read_EMAC_PTP_ADDEND() bfin_read32(EMAC_PTP_ADDEND) +#define bfin_write_EMAC_PTP_ADDEND(val) bfin_write32(EMAC_PTP_ADDEND, val) +#define bfin_read_EMAC_PTP_ACCR() bfin_read32(EMAC_PTP_ACCR) +#define bfin_write_EMAC_PTP_ACCR(val) bfin_write32(EMAC_PTP_ACCR, val) +#define bfin_read_EMAC_PTP_OFFSET() bfin_read32(EMAC_PTP_OFFSET) +#define bfin_write_EMAC_PTP_OFFSET(val) bfin_write32(EMAC_PTP_OFFSET, val) +#define bfin_read_EMAC_PTP_TIMELO() bfin_read32(EMAC_PTP_TIMELO) +#define bfin_write_EMAC_PTP_TIMELO(val) bfin_write32(EMAC_PTP_TIMELO, val) +#define bfin_read_EMAC_PTP_TIMEHI() bfin_read32(EMAC_PTP_TIMEHI) +#define bfin_write_EMAC_PTP_TIMEHI(val) bfin_write32(EMAC_PTP_TIMEHI, val) +#define bfin_read_EMAC_PTP_RXSNAPLO() bfin_read32(EMAC_PTP_RXSNAPLO) +#define bfin_read_EMAC_PTP_RXSNAPHI() bfin_read32(EMAC_PTP_RXSNAPHI) +#define bfin_read_EMAC_PTP_TXSNAPLO() bfin_read32(EMAC_PTP_TXSNAPLO) +#define bfin_read_EMAC_PTP_TXSNAPHI() bfin_read32(EMAC_PTP_TXSNAPHI) +#define bfin_read_EMAC_PTP_ALARMLO() bfin_read32(EMAC_PTP_ALARMLO) +#define bfin_write_EMAC_PTP_ALARMLO(val) bfin_write32(EMAC_PTP_ALARMLO, val) +#define bfin_read_EMAC_PTP_ALARMHI() bfin_read32(EMAC_PTP_ALARMHI) +#define bfin_write_EMAC_PTP_ALARMHI(val) bfin_write32(EMAC_PTP_ALARMHI, val) +#define bfin_read_EMAC_PTP_ID_OFF() bfin_read16(EMAC_PTP_ID_OFF) +#define bfin_write_EMAC_PTP_ID_OFF(val) bfin_write16(EMAC_PTP_ID_OFF, val) +#define bfin_read_EMAC_PTP_ID_SNAP() bfin_read32(EMAC_PTP_ID_SNAP) +#define bfin_write_EMAC_PTP_ID_SNAP(val) bfin_write32(EMAC_PTP_ID_SNAP, val) +#define bfin_read_EMAC_PTP_PPS_STARTHI() bfin_read32(EMAC_PTP_PPS_STARTHI) +#define bfin_write_EMAC_PTP_PPS_STARTHI(val) bfin_write32(EMAC_PTP_PPS_STARTHI, val) +#define bfin_read_EMAC_PTP_PPS_PERIOD() bfin_read32(EMAC_PTP_PPS_PERIOD) +#define bfin_write_EMAC_PTP_PPS_PERIOD(val) bfin_write32(EMAC_PTP_PPS_PERIOD, val) + /* Removable Storage Interface Registers */ #define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL) diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h index ee3d473..1d970df 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/cdefBF51x_base.h - * Based on: - * Author: + * Copyright 2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF52X_H diff --git a/arch/blackfin/mach-bf518/include/mach/defBF512.h b/arch/blackfin/mach-bf518/include/mach/defBF512.h index a96ca90..9b505bb 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF512.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF512.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/defBF512.h - * Based on: - * Author: + * Copyright 2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF512_H diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h index 56ee5a7..b5adca2 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/defBF514.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF514_H diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h index dfc9384..7eb1877 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF516.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/defBF516.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF516_H diff --git a/arch/blackfin/mach-bf518/include/mach/defBF518.h b/arch/blackfin/mach-bf518/include/mach/defBF518.h index 6e982ab..794cf06e 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF518.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF518.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/defBF518.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF518_H @@ -648,4 +624,32 @@ #define RWR 0x1 /* Read Wait Request */ +/* Bit masks for EMAC_PTP_CTL */ + +#define PTP_EN 0x1 /* Enable the PTP_TSYNC module */ +#define TL 0x2 /* Timestamp lock control */ +#define ASEN 0x10 /* Auxiliary snapshot control */ +#define PPSEN 0x80 /* Pulse-per-second (PPS) control */ +#define CKOEN 0x2000 /* Clock output control */ + +/* Bit masks for EMAC_PTP_IE */ + +#define ALIE 0x1 /* Alarm interrupt enable */ +#define RXEIE 0x2 /* Receive event interrupt enable */ +#define RXGIE 0x4 /* Receive general interrupt enable */ +#define TXIE 0x8 /* Transmit interrupt enable */ +#define RXOVE 0x10 /* Receive overrun error interrupt enable */ +#define TXOVE 0x20 /* Transmit overrun error interrupt enable */ +#define ASIE 0x40 /* Auxiliary snapshot interrupt enable */ + +/* Bit masks for EMAC_PTP_ISTAT */ + +#define ALS 0x1 /* Alarm status */ +#define RXEL 0x2 /* Receive event interrupt status */ +#define RXGL 0x4 /* Receive general interrupt status */ +#define TXTL 0x8 /* Transmit snapshot status */ +#define RXOV 0x10 /* Receive snapshot overrun status */ +#define TXOV 0x20 /* Transmit snapshot overrun status */ +#define ASL 0x40 /* Auxiliary snapshot interrupt status */ + #endif /* _DEF_BF518_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index 1bec8d1..e06f411 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf518/defBF51x_base.h - * Based on: - * Author: + * Copyright 2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF51X_H diff --git a/arch/blackfin/mach-bf518/include/mach/gpio.h b/arch/blackfin/mach-bf518/include/mach/gpio.h index 9757683..bbab2d7 100644 --- a/arch/blackfin/mach-bf518/include/mach/gpio.h +++ b/arch/blackfin/mach-bf518/include/mach/gpio.h @@ -1,7 +1,4 @@ /* - * File: arch/blackfin/mach-bf518/include/mach/gpio.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * * Copyright (C) 2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-bf518/include/mach/irq.h b/arch/blackfin/mach-bf518/include/mach/irq.h index 3ff0f09..14e52ec 100644 --- a/arch/blackfin/mach-bf518/include/mach/irq.h +++ b/arch/blackfin/mach-bf518/include/mach/irq.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf518/irq.h - * based on: include/asm-blackfin/mach-bf527/irq.h - * author: Michael Hennerich (michael.hennerich@analog.com) + * Copyright 2008 Analog Devices Inc. * - * created: - * description: - * system mmr register map - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later */ #ifndef _BF518_IRQ_H_ diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h index a0fc77f..e352910 100644 --- a/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -1,3 +1,9 @@ +/* + * Copyright 2008-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ diff --git a/arch/blackfin/mach-bf518/ints-priority.c b/arch/blackfin/mach-bf518/ints-priority.c index 3151fd5..bb05bef 100644 --- a/arch/blackfin/mach-bf518/ints-priority.c +++ b/arch/blackfin/mach-bf518/ints-priority.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf518/ints-priority.c - * Based on: arch/blackfin/mach-bf527/ints-priority.c - * Author: Bryan Wu <cooloney@kernel.org> + * Set up the interrupt priorities * - * Created: - * Description: Set up the interrupt priorities + * Copyright 2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 08a3f01..f1996b1 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -1,31 +1,10 @@ /* - * File: arch/blackfin/mach-bf527/boards/cm-bf527.c - * Based on: arch/blackfin/mach-bf537/boards/stamp.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -616,12 +595,6 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) static struct mtd_partition cm_partitions[] = { { @@ -786,6 +759,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = IRQ_PF8, }, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + { + I2C_BOARD_INFO("bfin-adv7393", 0x2B), + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) @@ -821,19 +799,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_100, 400000000), @@ -909,10 +874,6 @@ static struct platform_device *cmbf527_devices[] __initdata = { &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif @@ -942,8 +903,6 @@ static struct platform_device *cmbf527_devices[] __initdata = { #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) &cm_flash_device, #endif - - &bfin_gpios_device, }; static int __init cm_init(void) diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 68b4c80..cad23b1 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf527/boards/ezbrd.c - * Based on: arch/blackfin/mach-bf537/boards/stamp.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -611,19 +589,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_100, 400000000), @@ -732,8 +697,6 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezbrd_flash_device, #endif - - &bfin_gpios_device, }; static int __init ezbrd_init(void) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 2849b09..f09665f 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf527/boards/ezkit.c - * Based on: arch/blackfin/mach-bf537/boards/stamp.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -716,12 +694,6 @@ static struct platform_device bfin_fb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 @@ -837,6 +809,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = IRQ_PF8, }, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + { + I2C_BOARD_INFO("bfin-adv7393", 0x2B), + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) @@ -905,19 +882,6 @@ static struct platform_device bfin_rotary_device = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_100, 400000000), @@ -1001,10 +965,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bf52x_t350mcqb_device, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif @@ -1038,8 +998,6 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif - - &bfin_gpios_device, }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf527/dma.c b/arch/blackfin/mach-bf527/dma.c index 2318775..7bc7577 100644 --- a/arch/blackfin/mach-bf527/dma.c +++ b/arch/blackfin/mach-bf527/dma.c @@ -1,31 +1,11 @@ /* - * File: arch/blackfin/mach-bf527/dma.c - * Based on: - * Author: + * This file contains the simple DMA Implementation for Blackfin * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin + * Copyright 2007-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ + #include <linux/module.h> #include <asm/blackfin.h> diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h index 3832aab..ff68c88 100644 --- a/arch/blackfin/mach-bf527/include/mach/bf527.h +++ b/arch/blackfin/mach-bf527/include/mach/bf527.h @@ -1,30 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/bf527.h - * Based on: include/asm-blackfin/mach-bf537/bf537.h - * Author: Michael Hennerich (michael.hennerich@analog.com) + * Copyright 2007-2009 Analog Devices Inc. * - * Created: - * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527 - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __MACH_BF527_H__ diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index ebd6ceb..c1d55b8 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf527/bfin_serial_5xx.h - * based on: - * author: + * Copyright 2007-2009 Analog Devices Inc. * - * created: - * description: - * blackfin serial driver head file - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later */ #include <linux/serial.h> diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h index ea9cb0f..e7d6034 100644 --- a/arch/blackfin/mach-bf527/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/blackfin.h - * Based on: - * Author: + * Copyright 2007-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _MACH_BLACKFIN_H_ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h index 663c2bb..1079af8 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/cdefbf522.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: system mmr register map - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF522_H diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h index 00377eb..dc3119e9 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/cdefbf525.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: system mmr register map - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF525_H diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h index fca8db7..d6579449 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/cdefbf527.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: system mmr register map - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF527_H diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h index 1fe76d8..7014dde 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/cdefBF52x_base.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF52X_H diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h index 0a8cdcd..cb139a2 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF522.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/defBF522.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF522_H diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h index 5cd7576..82abefc 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/defBF525.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF525_H diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h index f040f36..570a125 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF527.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/defBF527.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF527_H diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index 68b55d0..f821700 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf527/defBF52x_base.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF52X_H diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h index 06b6eeb..104bff8 100644 --- a/arch/blackfin/mach-bf527/include/mach/gpio.h +++ b/arch/blackfin/mach-bf527/include/mach/gpio.h @@ -1,7 +1,4 @@ /* - * File: arch/blackfin/mach-bf527/include/mach/gpio.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * * Copyright (C) 2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h index 8ea660d..aa6579a 100644 --- a/arch/blackfin/mach-bf527/include/mach/irq.h +++ b/arch/blackfin/mach-bf527/include/mach/irq.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf527/irq.h - * based on: include/asm-blackfin/mach-bf537/irq.h - * author: Michael Hennerich (michael.hennerich@analog.com) + * Copyright 2007-2008 Analog Devices Inc. * - * created: - * description: - * system mmr register map - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later */ #ifndef _BF527_IRQ_H_ diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h index 72b1652..d4518b6 100644 --- a/arch/blackfin/mach-bf527/include/mach/portmux.h +++ b/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c index f8c8acd..44ca215 100644 --- a/arch/blackfin/mach-bf527/ints-priority.c +++ b/arch/blackfin/mach-bf527/ints-priority.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf537/ints-priority.c - * Based on: arch/blackfin/mach-bf533/ints-priority.c - * Author: Michael Hennerich (michael.hennerich@analog.com) + * Set up the interrupt priorities * - * Created: - * Description: Set up the interrupt priorities + * Copyright 2007-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 6c2b47f..43f43a0 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -1,32 +1,11 @@ /* - * File: arch/blackfin/mach-bf533/H8606.c - * Based on: arch/blackfin/mach-bf533/stamp.c - * Author: Javier Herrero <jherrero@hvsistemas.es> + * Copyright 2004-2009 Analog Devices Inc. + * 2007-2008 HV Sistemas S.L. + * Javier Herrero <jherrero@hvsistemas.es> + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2007 - * Description: Board Info File for the HV Sistemas H8606 board - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc - * Copyright 2007,2008 HV Sistemas S.L. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 8208d67..b580884 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -1,16 +1,10 @@ /* - * File: arch/blackfin/mach-bf533/blackstamp.c - * Based on: arch/blackfin/mach-bf533/stamp.c - * Author: Benjamin Matthews <bmat@lle.rochester.edu> - * Aidan Williams <aidan@nicta.com.au> + * Board Info File for the BlackStamp * - * Created: 2008 - * Description: Board Info File for the BlackStamp - * - * Copyright 2005 National ICT Australia (NICTA) * Copyright 2004-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ + * 2008 Benjamin Matthews <bmat@lle.rochester.edu> + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * * More info about the BlackStamp at: * http://blackfin.uclinux.org/gf/project/blackstamp/ @@ -281,19 +275,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include <linux/i2c-gpio.h> @@ -384,8 +365,6 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif - - &bfin_gpios_device, }; static int __init blackstamp_init(void) diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 7443b26..7fc3b86 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -1,30 +1,10 @@ /* - * File: arch/blackfin/mach-bf533/boards/cm_bf533.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005 + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2005 - * Description: Board description file - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -261,19 +241,6 @@ static struct platform_device smsc911x_device = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { @@ -506,8 +473,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) ¶_flash_device, #endif - - &bfin_gpios_device, }; static int __init cm_bf533_init(void) diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index fd518e3..d4689dc 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf533/ezkit.c - * Based on: Original Work - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2005 - * Description: - * - * Modified: Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -33,12 +11,14 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/plat-ram.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> +#include <linux/i2c.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -56,12 +36,6 @@ static struct platform_device rtc_device = { }; #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. @@ -98,54 +72,69 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE) -static const char *map_probes[] = { - "stm_flash", - NULL, +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition ezkit_partitions_a[] = { + { + .name = "bootloader(nor a)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor a)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, }; -static struct platdata_mtd_ram stm_pri_data_a = { - .mapname = "Flash A Primary", - .map_probes = map_probes, - .bankwidth = 2, +static struct physmap_flash_data ezkit_flash_data_a = { + .width = 2, + .parts = ezkit_partitions_a, + .nr_parts = ARRAY_SIZE(ezkit_partitions_a), }; -static struct resource stm_pri_resource_a = { +static struct resource ezkit_flash_resource_a = { .start = 0x20000000, .end = 0x200fffff, .flags = IORESOURCE_MEM, }; -static struct platform_device stm_pri_device_a = { - .name = "mtd-ram", +static struct platform_device ezkit_flash_device_a = { + .name = "physmap-flash", .id = 0, .dev = { - .platform_data = &stm_pri_data_a, + .platform_data = &ezkit_flash_data_a, }, .num_resources = 1, - .resource = &stm_pri_resource_a, + .resource = &ezkit_flash_resource_a, +}; + +static struct mtd_partition ezkit_partitions_b[] = { + { + .name = "file system(nor b)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, }; -static struct platdata_mtd_ram stm_pri_data_b = { - .mapname = "Flash B Primary", - .map_probes = map_probes, - .bankwidth = 2, +static struct physmap_flash_data ezkit_flash_data_b = { + .width = 2, + .parts = ezkit_partitions_b, + .nr_parts = ARRAY_SIZE(ezkit_partitions_b), }; -static struct resource stm_pri_resource_b = { +static struct resource ezkit_flash_resource_b = { .start = 0x20100000, .end = 0x201fffff, .flags = IORESOURCE_MEM, }; -static struct platform_device stm_pri_device_b = { - .name = "mtd-ram", +static struct platform_device ezkit_flash_device_b = { + .name = "physmap-flash", .id = 4, .dev = { - .platform_data = &stm_pri_data_b, + .platform_data = &ezkit_flash_data_b, }, .num_resources = 1, - .resource = &stm_pri_resource_b, + .resource = &ezkit_flash_resource_b, }; #endif @@ -400,19 +389,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include <linux/i2c-gpio.h> @@ -460,13 +436,21 @@ static struct platform_device bfin_dpmc = { }, }; +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + { + I2C_BOARD_INFO("bfin-adv7393", 0x2B), + }, +#endif +}; + static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE) - &stm_pri_device_a, - &stm_pri_device_b, +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + &ezkit_flash_device_a, + &ezkit_flash_device_b, #endif #if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) @@ -482,10 +466,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif @@ -507,8 +487,6 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif - - &bfin_gpios_device, }; static int __init ezkit_init(void) @@ -516,6 +494,8 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); return 0; } diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index f19b6337..644be5e 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -1,34 +1,12 @@ /* - * File: arch/blackfin/mach-bf533/ip0x.c - * Based on: arch/blackfin/mach-bf533/bf1.c - * Based on: arch/blackfin/mach-bf533/stamp.c - * Author: Ivan Danov <idanov@gmail.com> - * Modified for IP0X David Rowe + * Copyright 2004-2009 Analog Devices Inc. + * 2007 David Rowe + * 2006 Intratrade Ltd. + * Ivan Danov <idanov@gmail.com> + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2007 - * Description: Board info file for the IP04/IP08 boards, which - * are derived from the BlackfinOne V2.0 boards. - * - * Modified: - * COpyright 2007 David Rowe - * Copyright 2006 Intratrade Ltd. - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -145,7 +123,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */ .enable_dma = 0, /* if 1 - block!!! */ .bits_per_word = 8, - .cs_change_per_word = 0, }; #endif diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 729fd7c..82f70ef 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf533/stamp.c - * Based on: arch/blackfin/mach-bf533/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2005 - * Description: Board Info File for the BF533-STAMP - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -95,12 +73,6 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) static struct resource net2272_bfin_resources[] = { { @@ -436,19 +408,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include <linux/i2c-gpio.h> @@ -487,6 +446,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .irq = 39, }, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + { + I2C_BOARD_INFO("bfin-adv7393", 0x2B), + }, +#endif }; static const unsigned int cclk_vlev_datasheet[] = @@ -528,10 +492,6 @@ static struct platform_device *stamp_devices[] __initdata = { &smc91x_device, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) &net2272_bfin_device, #endif @@ -563,8 +523,6 @@ static struct platform_device *stamp_devices[] __initdata = { &i2c_gpio_device, #endif - &bfin_gpios_device, - #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) &stamp_flash_device, #endif diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c index 7a443c3..4a14a46 100644 --- a/arch/blackfin/mach-bf533/dma.c +++ b/arch/blackfin/mach-bf533/dma.c @@ -1,31 +1,11 @@ /* - * File: arch/blackfin/mach-bf533/dma.c - * Based on: - * Author: + * simple DMA Implementation for Blackfin * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin + * Copyright 2007-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ + #include <linux/module.h> #include <asm/blackfin.h> diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h index cf4427c..e3e05f8 100644 --- a/arch/blackfin/mach-bf533/include/mach/bf533.h +++ b/arch/blackfin/mach-bf533/include/mach/bf533.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/mach-bf533/bf533.h - * Based on: - * Author: + * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 * - * Created: - * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * Copyright 2005-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __MACH_BF533_H__ diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index 6965b40..9e1f3de 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf533/bfin_serial_5xx.h - * based on: - * author: + * Copyright 2006-2009 Analog Devices Inc. * - * created: - * description: - * blackfin serial driver head file - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later */ #include <linux/serial.h> diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h index 499e897..f4bd6df 100644 --- a/arch/blackfin/mach-bf533/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf533/blackfin.h - * Based on: - * Author: + * Copyright 2005-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _MACH_BLACKFIN_H_ diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h index bbc3c83..feb2392 100644 --- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf533/cdefBF532.h - * Based on: - * Author: + * Copyright 2005-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF532_H diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h index 7f46332..02b328e 100644 --- a/arch/blackfin/mach-bf533/include/mach/defBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -1,48 +1,10 @@ -/************************************************************************ - * - * This file is subject to the terms and conditions of the GNU Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Non-GPL License also available as part of VisualDSP++ - * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html - * - * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved - * - * This file under source code control, please send bugs or changes to: - * dsptools.support@analog.com - * - ************************************************************************/ /* - * File: include/asm-blackfin/mach-bf533/defBF532.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. + * System & MMR bit and Address definitions for ADSP-BF532 * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright 2005-2008 Analog Devices Inc. * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ -/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ #ifndef _DEF_BF532_H #define _DEF_BF532_H diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h index e45c170..2af19d6 100644 --- a/arch/blackfin/mach-bf533/include/mach/gpio.h +++ b/arch/blackfin/mach-bf533/include/mach/gpio.h @@ -1,7 +1,4 @@ /* - * File: arch/blackfin/mach-bf533/include/mach/gpio.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * * Copyright (C) 2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h index db1e346..c31498b 100644 --- a/arch/blackfin/mach-bf533/include/mach/irq.h +++ b/arch/blackfin/mach-bf533/include/mach/irq.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf533/defBF532.h - * Based on: - * Author: + * Copyright 2005-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _BF533_IRQ_H_ diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h index 2f59ce0..075dae1 100644 --- a/arch/blackfin/mach-bf533/include/mach/portmux.h +++ b/arch/blackfin/mach-bf533/include/mach/portmux.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c index f51994b..8f714cf 100644 --- a/arch/blackfin/mach-bf533/ints-priority.c +++ b/arch/blackfin/mach-bf533/ints-priority.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf533/ints-priority.c - * Based on: - * Author: Michael Hennerich + * Set up the interrupt priorities * - * Created: ? - * Description: Set up the interrupt priorities + * Copyright 2005-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index 87acb7d..c85f4d7 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -1,31 +1,10 @@ /* - * File: arch/blackfin/mach-bf537/boards/cm_bf537.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2005 - * Description: Board description file - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -297,19 +276,6 @@ static struct platform_device net2272_bfin_device = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) static struct mtd_partition cm_partitions[] = { { @@ -699,8 +665,6 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) &cm_flash_device, #endif - - &bfin_gpios_device, }; static int __init cm_bf537e_init(void) diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index 8219dc3..ea11aa8 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -1,31 +1,10 @@ /* - * File: arch/blackfin/mach-bf537/boards/cm_bf537u.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2005 - * Description: Board description file - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -298,19 +277,6 @@ static struct platform_device net2272_bfin_device = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) static struct mtd_partition cm_partitions[] = { { @@ -605,8 +571,6 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) &cm_flash_device, #endif - - &bfin_gpios_device, }; static int __init cm_bf537u_init(void) diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 399f81d..0da9272 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -1,4 +1,10 @@ /* + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Cambridge Signal Processing + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> + * + * Licensed under the GPL-2 or later. */ #include <linux/device.h> diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 10b35b8..9ba2904 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf537/boards/stamp.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -302,7 +280,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .cs_change_per_word = 0, .enable_dma = 0, .bits_per_word = 16, }; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9db6b40..c46baa5 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf537/boards/stamp.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -121,19 +99,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -1078,12 +1043,6 @@ static struct platform_device bfin_fb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) #include <asm/bfin-lq035q1.h> @@ -1498,6 +1457,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .platform_data = (void *)&adp5588_gpio_data, }, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + { + I2C_BOARD_INFO("bfin-adv7393", 0x2B), + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) @@ -1668,10 +1632,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_lq035q1_device, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif @@ -1702,8 +1662,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_device_gpiokeys, #endif - &bfin_gpios_device, - #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) &bfin_async_nand_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 61353f7..57163b6 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -1,31 +1,10 @@ /* - * File: arch/blackfin/mach-bf537/boards/tcm_bf537.c - * Based on: arch/blackfin/mach-bf533/boards/cm_bf537.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2005 - * Description: Board description file - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -298,19 +277,6 @@ static struct platform_device net2272_bfin_device = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) static struct mtd_partition cm_partitions[] = { { @@ -607,8 +573,6 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) &cm_flash_device, #endif - - &bfin_gpios_device, }; static int __init tcm_bf537_init(void) diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c index d23fc0e..5c8c4ed 100644 --- a/arch/blackfin/mach-bf537/dma.c +++ b/arch/blackfin/mach-bf537/dma.c @@ -1,31 +1,11 @@ /* - * File: arch/blackfin/mach-bf537/dma.c - * Based on: - * Author: + * Copyright 2007-2009 Analog Devices Inc. * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin + * Licensed under the GPL-2 or later. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * This file contains the simple DMA Implementation for Blackfin */ + #include <linux/module.h> #include <asm/blackfin.h> diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h index f194a84..17fab44 100644 --- a/arch/blackfin/mach-bf537/include/mach/bf537.h +++ b/arch/blackfin/mach-bf537/include/mach/bf537.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/mach-bf537/bf537.h - * Based on: - * Author: + * System MMR Register and memory map for ADSP-BF537 * - * Created: - * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537 + * Copyright 2005-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __MACH_BF537_H__ diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index e95d54f..635c91c 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf537/bfin_serial_5xx.h - * based on: - * author: + * Copyright 2006-2009 Analog Devices Inc. * - * created: - * description: - * blackfin serial driver header files - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later */ #include <linux/serial.h> diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h index 9ee8834..eab006d 100644 --- a/arch/blackfin/mach-bf537/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf537/blackfin.h - * Based on: - * Author: + * Copyright 2005-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _MACH_BLACKFIN_H_ diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h index 5f8b5f8..91825c9 100644 --- a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf537/cdefbf534.h - * Based on: - * Author: + * Copyright 2005-2008 Analog Devices Inc. * - * Created: - * Description: system mmr register map - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF534_H diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h index b8fc949..9363c39 100644 --- a/arch/blackfin/mach-bf537/include/mach/cdefBF537.h +++ b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf537/cdefBF537.h - * Based on: - * Author: + * Copyright 2005-2008 Analog Devices Inc. * - * Created: - * Description: - * System MMR Register Map - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later */ #ifndef _CDEF_BF537_H diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index a3227f9..cebb14f 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf537/cdefBF537.h - * Based on: - * Author: + * Copyright 2005-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF534_H diff --git a/arch/blackfin/mach-bf537/include/mach/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h index 3d6c83e..8cb5d5c 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF537.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf537/defbf537.h - * based on: - * author: + * Copyright 2005-2008 Analog Devices Inc. * - * created: - * description: - * system mmr register map - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF537_H diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h index d77a31e..104bff8 100644 --- a/arch/blackfin/mach-bf537/include/mach/gpio.h +++ b/arch/blackfin/mach-bf537/include/mach/gpio.h @@ -1,7 +1,4 @@ /* - * File: arch/blackfin/mach-bf537/include/mach/gpio.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * * Copyright (C) 2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h index b2a71d5..0defa94 100644 --- a/arch/blackfin/mach-bf537/include/mach/irq.h +++ b/arch/blackfin/mach-bf537/include/mach/irq.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf537/irq.h - * based on: - * author: + * Copyright 2005-2008 Analog Devices Inc. * - * created: - * description: - * system mmr register map - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later */ #ifndef _BF537_IRQ_H_ diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h index 87285e7..da97603 100644 --- a/arch/blackfin/mach-bf537/include/mach/portmux.h +++ b/arch/blackfin/mach-bf537/include/mach/portmux.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c index 51c4808..f650062 100644 --- a/arch/blackfin/mach-bf537/ints-priority.c +++ b/arch/blackfin/mach-bf537/ints-priority.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf537/ints-priority.c - * Based on: arch/blackfin/mach-bf533/ints-priority.c - * Author: Michael Hennerich + * Copyright 2005-2009 Analog Devices Inc. * - * Created: - * Description: Set up the interrupt priorities + * Licensed under the GPL-2 or later. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Set up the interrupt priorities */ #include <linux/module.h> diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index f2ac3b0..14af5c2 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf538/boards/ezkit.c - * Based on: arch/blackfin/mach-bf537/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 */ #include <linux/device.h> @@ -237,7 +215,6 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8, - .cs_change_per_word = 0, }; #endif @@ -506,19 +483,6 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/gpio_keys.h> @@ -658,8 +622,6 @@ static struct platform_device *cm_bf538_devices[] __initdata = { &bfin_device_gpiokeys, #endif - &bfin_gpios_device, - #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif diff --git a/arch/blackfin/mach-bf538/dma.c b/arch/blackfin/mach-bf538/dma.c index d6837fb..5dc0225 100644 --- a/arch/blackfin/mach-bf538/dma.c +++ b/arch/blackfin/mach-bf538/dma.c @@ -1,31 +1,11 @@ /* - * File: arch/blackfin/mach-bf538/dma.c - * Based on: - * Author: + * the simple DMA Implementation for Blackfin * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin + * Copyright 2008 Analog Devices Inc. * - * Modified: - * Copyright 2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ + #include <linux/module.h> #include <asm/blackfin.h> diff --git a/arch/blackfin/mach-bf538/include/mach/bf538.h b/arch/blackfin/mach-bf538/include/mach/bf538.h index 9c8abb3..0cf5bf8 100644 --- a/arch/blackfin/mach-bf538/include/mach/bf538.h +++ b/arch/blackfin/mach-bf538/include/mach/bf538.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/mach-bf538/bf538.h - * Based on: include/asm-blackfin/mach-bf537/bf537.h - * Author: Michael Hennerich (michael.hennerich@analog.com) + * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF538 * - * Created: - * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527 + * Copyright 2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __MACH_BF538_H__ diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index 999f239..5c14814 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf538/bfin_serial_5xx.h - * based on: - * author: + * Copyright 2008-2009 Analog Devices Inc. * - * created: - * description: - * blackfin serial driver header files - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later. */ #include <linux/serial.h> diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h index 5ecee16..278e894 100644 --- a/arch/blackfin/mach-bf538/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf538/blackfin.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _MACH_BLACKFIN_H_ diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h index 1de6751..401ebd7 100644 --- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h +++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf538/cdefBF538.h - * Based on: - * Author: + * Copyright 2008-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _CDEF_BF538_H diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h index 1c58914..5f6c34d 100644 --- a/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -1,47 +1,9 @@ -/************************************************************************ - * - * This file is subject to the terms and conditions of the GNU Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Non-GPL License also available as part of VisualDSP++ - * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html - * - * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved - * - * This file under source code control, please send bugs or changes to: - * dsptools.support@analog.com - * - ************************************************************************/ /* - * File: include/asm-blackfin/mach-bf538/defBF539.h - * Based on: - * Author: - * - * Created: - * Description: + * Copyright 2008-2009 Analog Devices Inc. * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ + /* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF538/9 */ #ifndef _DEF_BF539_H diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h index 30f4f72..295c78a 100644 --- a/arch/blackfin/mach-bf538/include/mach/gpio.h +++ b/arch/blackfin/mach-bf538/include/mach/gpio.h @@ -1,7 +1,4 @@ /* - * File: arch/blackfin/mach-bf538/include/mach/gpio.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * * Copyright (C) 2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-bf538/include/mach/irq.h b/arch/blackfin/mach-bf538/include/mach/irq.h index fdc87fe..a4b7fcb 100644 --- a/arch/blackfin/mach-bf538/include/mach/irq.h +++ b/arch/blackfin/mach-bf538/include/mach/irq.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf538/irq.h - * based on: include/asm-blackfin/mach-bf537/irq.h - * author: Michael Hennerich (michael.hennerich@analog.com) + * Copyright 2008 Analog Devices Inc. * - * created: - * description: - * system mmr register map - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later. */ #ifndef _BF538_IRQ_H_ diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h index c8db264..6121cf8 100644 --- a/arch/blackfin/mach-bf538/include/mach/portmux.h +++ b/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -1,3 +1,9 @@ +/* + * Copyright 2008-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ diff --git a/arch/blackfin/mach-bf538/ints-priority.c b/arch/blackfin/mach-bf538/ints-priority.c index 70d17e5..1fa793c 100644 --- a/arch/blackfin/mach-bf538/ints-priority.c +++ b/arch/blackfin/mach-bf538/ints-priority.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf538/ints-priority.c - * Based on: arch/blackfin/mach-bf533/ints-priority.c - * Author: Michael Hennerich + * Set up the interrupt priorities * - * Created: - * Description: Set up the interrupt priorities + * Copyright 2008 Analog Devices Inc. * - * Modified: - * Copyright 2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index e565aae..ccdcd6d 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -1,31 +1,10 @@ /* - * File: arch/blackfin/mach-bf548/boards/cm_bf548.c - * Based on: arch/blackfin/mach-bf537/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -380,19 +359,6 @@ static struct platform_device musb_device = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) static struct resource bfin_atapi_resources[] = { { @@ -546,13 +512,11 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8, - .cs_change_per_word = 0, }; #endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .cs_change_per_word = 0, .enable_dma = 0, .bits_per_word = 16, }; @@ -853,8 +817,6 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) ¶_flash_device, #endif - - &bfin_gpios_device, }; static int __init cm_bf548_init(void) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index c66f380..1a5286b 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf548/boards/ezkit.c - * Based on: arch/blackfin/mach-bf537/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -208,7 +186,6 @@ static struct platform_device bfin_rotary_device = { #endif #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) -#include <linux/input.h> #include <linux/spi/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -636,7 +613,6 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8, - .cs_change_per_word = 0, }; #endif @@ -650,7 +626,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .cs_change_per_word = 0, .enable_dma = 0, .bits_per_word = 16, }; @@ -681,7 +656,6 @@ static struct bfin5xx_spi_chip spidev_chip_info = { static struct bfin5xx_spi_chip spi_adxl34x_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8, - .cs_change_per_word = 0, }; #endif @@ -908,19 +882,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - static const unsigned int cclk_vlev_datasheet[] = { /* @@ -1028,8 +989,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_device_gpiokeys, #endif - &bfin_gpios_device, - #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c index d9239bc..039a6d9 100644 --- a/arch/blackfin/mach-bf548/dma.c +++ b/arch/blackfin/mach-bf548/dma.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf548/dma.c - * Based on: - * Author: + * the simple DMA Implementation for Blackfin * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin + * Copyright 2007-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h index cd31f72..7bead5c 100644 --- a/arch/blackfin/mach-bf548/include/mach/bf548.h +++ b/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -1,30 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/bf548.h - * Based on: - * Author: + * Copyright 2007-2009 Analog Devices Inc. * - * Created: - * Description: System MMR register and memory map for ADSP-BF548 - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __MACH_BF548_H__ diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h index 9c7ca62..8821efe 100644 --- a/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h +++ b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef BF54X_LQ043_H #define BF54X_LQ043_H diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h index 1fb4ec7..49338ae 100644 --- a/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h +++ b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _BFIN_KPAD_H #define _BFIN_KPAD_H diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h index 2d1b5fa..dd44aa7 100644 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf548/bfin_serial_5xx.h - * based on: - * author: + * Copyright 2007-2009 Analog Devices Inc. * - * created: - * description: - * blackfin serial driver head file - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later. */ #include <linux/serial.h> diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h index 318667b..13302b6 100644 --- a/arch/blackfin/mach-bf548/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h @@ -1,32 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/blackfin.h - * Based on: - * Author: + * Copyright 2007-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _MACH_BLACKFIN_H_ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h index 07aefb9..42f4a94 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF542.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/cdefBF542.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _CDEF_BF542_H diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h index 431a692..2207799 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/cdefBF544.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _CDEF_BF544_H diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h index 93376e9..4234215 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/cdefBF547.h - * Based on: - * Author: + * Copyright 2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _CDEF_BF548_H diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h index 9cd7438..df84180 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/cdefBF548.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _CDEF_BF548_H diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h index ead360b..34c84c7 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf549/cdefBF549.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _CDEF_BF549_H diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h index 6e636c4..a2e9d98 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/cdefBF54x_base.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _CDEF_BF54X_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h index b131654..d3bc6d1 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF542.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/defBF542.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF542_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index c2c785b..dd414ae 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/defBF544.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF544_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 661f0d8..5a9dbab 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/defBF547.h - * Based on: - * Author: + * Copyright 2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF548_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h index 85d4bad..82cd593 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/defBF548.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF548_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h index 0967345..6fc6e39 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/defBF549.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF549_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index e022e89..8590c8c 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf548/defBF54x_base.h - * Based on: - * Author: + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF54X_H diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index 3a20517..850e39d 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -1,34 +1,8 @@ /* - * File: include/asm-blackfin/mach-bf548/gpio.h - * Based on: - * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) - * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Copyright 2007-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. */ - - #define GPIO_PA0 0 #define GPIO_PA1 1 #define GPIO_PA2 2 diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index f194625..106db05 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf548/irq.h - * based on: include/asm-blackfin/mach-bf537/irq.h - * author: Roy Huang (roy.huang@analog.com) + * Copyright 2007-2009 Analog Devices Inc. * - * created: - * description: - * system mmr register map - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later. */ #ifndef _BF548_IRQ_H_ diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index ce372ba..89ad6a8 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c index 9dd0fa3..48dd3a4 100644 --- a/arch/blackfin/mach-bf548/ints-priority.c +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf537/ints-priority.c - * Based on: arch/blackfin/mach-bf533/ints-priority.c - * Author: Michael Hennerich + * Copyright 2007-2008 Analog Devices Inc. * - * Created: - * Description: Set up the interrupt priorities + * Licensed under the GPL-2 or later. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Set up the interrupt priorities */ #include <linux/module.h> diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S index 9439bc6..0261a5e 100644 --- a/arch/blackfin/mach-bf561/atomic.S +++ b/arch/blackfin/mach-bf561/atomic.S @@ -1,23 +1,8 @@ /* - * File: arch/blackfin/mach-bf561/atomic.S - * Author: Philippe Gerum <rpm@xenomai.org> + * Copyright 2007-2008 Analog Devices Inc. + * Philippe Gerum <rpm@xenomai.org> * - * Copyright 2007 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/linkage.h> diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 6577ecf..dfc8d5b 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -1,30 +1,10 @@ /* - * File: arch/blackfin/mach-bf533/boards/cm_bf561.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005 + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2006 - * Description: Board description file - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -285,19 +265,6 @@ static struct platform_device net2272_bfin_device = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) static struct resource isp1362_hcd_resources[] = { { @@ -532,8 +499,6 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) ¶_flash_device, #endif - - &bfin_gpios_device, }; static int __init cm_bf561_init(void) diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index caed96b..9e2d8cf 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf561/ezkit.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -387,19 +366,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include <linux/i2c-gpio.h> @@ -493,8 +459,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &isp1362_hcd_device, #endif - &bfin_gpios_device, - #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index 6f77dbe..8ba7252 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -1,15 +1,13 @@ /* - * File: arch/blackfin/mach-bf561/tepla.c + * Copyright 2004-2007 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Copyright 2004-2007 Analog Devices Inc. - * Only SMSC91C1111 was registered, may do more later. + * Thanks to Jamey Hicks. * - * Copyright 2005 National ICT Australia (NICTA), Aidan Williams <aidan@nicta.com.au> - * Thanks to Jamey Hicks. + * Only SMSC91C1111 was registered, may do more later. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Licensed under the GPL-2 */ #include <linux/device.h> diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c index 42b0037..c938c3c 100644 --- a/arch/blackfin/mach-bf561/dma.c +++ b/arch/blackfin/mach-bf561/dma.c @@ -1,31 +1,11 @@ /* - * File: arch/blackfin/mach-bf561/dma.c - * Based on: - * Author: + * the simple DMA Implementation for Blackfin * - * Created: - * Description: This file contains the simple DMA Implementation for Blackfin + * Copyright 2007-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ + #include <linux/module.h> #include <asm/blackfin.h> diff --git a/arch/blackfin/mach-bf561/include/mach/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h index 9968362..9f9a367 100644 --- a/arch/blackfin/mach-bf561/include/mach/bf561.h +++ b/arch/blackfin/mach-bf561/include/mach/bf561.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/mach-bf561/bf561.h - * Based on: - * Author: + * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 * - * Created: - * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * Copyright 2005-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __MACH_BF561_H__ diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index fd5e887..e33e158 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -1,32 +1,7 @@ /* - * file: include/asm-blackfin/mach-bf561/bfin_serial_5xx.h - * based on: - * author: + * Copyright 2006-2009 Analog Devices Inc. * - * created: - * description: - * blackfin serial driver head file - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. + * Licensed under the GPL-2 or later. */ #include <linux/serial.h> diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h index 8be3135..67d6bdc 100644 --- a/arch/blackfin/mach-bf561/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf561/blackfin.h - * Based on: - * Author: + * Copyright 2005-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _MACH_BLACKFIN_H_ diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h index 9d9858c..81ecdb7 100644 --- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h @@ -1,31 +1,7 @@ /* - * File: include/asm-blackfin/mach-bf561/cdefBF561.h - * Based on: - * Author: + * Copyright 2005-2009 Analog Devices Inc. * - * Created: - * Description: C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _CDEF_BF561_H diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index 5fc0f05..a31e509 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -1,32 +1,7 @@ - /* - * File: include/asm-blackfin/mach-bf561/defBF561.h - * Based on: - * Author: - * - * Created: - * Description: - * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright 2005-2009 Analog Devices Inc. * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the ADI BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF561_H diff --git a/arch/blackfin/mach-bf561/include/mach/gpio.h b/arch/blackfin/mach-bf561/include/mach/gpio.h index 7882f79..a651a8c 100644 --- a/arch/blackfin/mach-bf561/include/mach/gpio.h +++ b/arch/blackfin/mach-bf561/include/mach/gpio.h @@ -1,7 +1,4 @@ /* - * File: arch/blackfin/mach-bf561/include/mach/gpio.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * * Copyright (C) 2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h index 6698389..7b208db 100644 --- a/arch/blackfin/mach-bf561/include/mach/irq.h +++ b/arch/blackfin/mach-bf561/include/mach/irq.h @@ -1,32 +1,7 @@ - /* - * File: include/asm-blackfin/mach-bf561/irq.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright 2005-2008 Analog Devices Inc. * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Licensed under the GPL-2 or later. */ #ifndef _BF561_IRQ_H_ diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h index 2e5ad63..3a7b46b 100644 --- a/arch/blackfin/mach-bf561/include/mach/portmux.h +++ b/arch/blackfin/mach-bf561/include/mach/portmux.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ diff --git a/arch/blackfin/mach-bf561/include/mach/smp.h b/arch/blackfin/mach-bf561/include/mach/smp.h index f9e65eb..390c7f4 100644 --- a/arch/blackfin/mach-bf561/include/mach/smp.h +++ b/arch/blackfin/mach-bf561/include/mach/smp.h @@ -1,3 +1,9 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + #ifndef _MACH_BF561_SMP #define _MACH_BF561_SMP diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c index 9d2f233..b442417 100644 --- a/arch/blackfin/mach-bf561/ints-priority.c +++ b/arch/blackfin/mach-bf561/ints-priority.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-bf561/ints-priority.c - * Based on: arch/blackfin/mach-bf537/ints-priority.c - * Author: Michael Hennerich + * Set up the interrupt priorities * - * Created: - * Description: Set up the interrupt priorities + * Copyright 2005-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S index f72a6af..8e60503 100644 --- a/arch/blackfin/mach-bf561/secondary.S +++ b/arch/blackfin/mach-bf561/secondary.S @@ -1,26 +1,10 @@ /* - * File: arch/blackfin/mach-bf561/secondary.S - * Based on: arch/blackfin/mach-bf561/head.S - * Author: Philippe Gerum <rpm@xenomai.org> + * BF561 coreB bootstrap file * - * Copyright 2007 Analog Devices Inc. + * Copyright 2007-2009 Analog Devices Inc. + * Philippe Gerum <rpm@xenomai.org> * - * Description: BF561 coreB bootstrap file - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/linkage.h> diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index 8c10701..510f576 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -1,23 +1,8 @@ /* - * File: arch/blackfin/mach-bf561/smp.c - * Author: Philippe Gerum <rpm@xenomai.org> + * Copyright 2007-2009 Analog Devices Inc. + * Philippe Gerum <rpm@xenomai.org> * - * Copyright 2007 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/init.h> diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 5998d86..9dbafcd 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-common/arch_checks.c - * Based on: - * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * Do some checking to make sure things are OK * - * Created: 25Jul07 - * Description: Do some checking to make sure things are OK + * Copyright 2007-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <asm/fixed_code.h> diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c index 4ebbd78..a60a24f 100644 --- a/arch/blackfin/mach-common/cache-c.c +++ b/arch/blackfin/mach-common/cache-c.c @@ -3,8 +3,6 @@ * * Copyright 2004-2009 Analog Devices Inc. * - * Enter bugs at http://blackfin.uclinux.org/ - * * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index d9666fe..ea54031 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -3,8 +3,6 @@ * * Copyright 2004-2008 Analog Devices Inc. * - * Enter bugs at http://blackfin.uclinux.org/ - * * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 85c6580..0150650 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-common/cpufreq.c - * Based on: - * Author: + * Blackfin core clock scaling * - * Created: - * Description: Blackfin core clock scaling + * Copyright 2008-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/kernel.h> diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 1e7cac2..94a0375 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1,32 +1,11 @@ /* - * File: arch/blackfin/mach-common/entry.S - * Based on: - * Author: Linus Torvalds + * Contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all + * interrupts and faults that can result in a task-switch. * - * Created: ? - * Description: contains the system-call and fault low-level handling routines. - * This also contains the timer-interrupt handler, as well as all - * interrupts and faults that can result in a task-switch. + * Copyright 2005-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ /* NOTE: This code handles signal-recognition, which happens every time diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 9c79dfe..cab0a00 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -3,8 +3,6 @@ * * Copyright 2004-2008 Analog Devices Inc. * - * Enter bugs at http://blackfin.uclinux.org/ - * * Licensed under the GPL-2 or later. */ diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 82d417e..8085ff1 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -1,31 +1,11 @@ /* - * File: arch/blackfin/mach-common/interrupt.S - * Based on: - * Author: D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca> - * Kenneth Albanowski <kjahds@kjahds.com> - * - * Created: ? - * Description: Interrupt Entries - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Interrupt Entries * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright 2005-2009 Analog Devices Inc. + * D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca> + * Kenneth Albanowski <kjahds@kjahds.com> * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <asm/blackfin.h> diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 6ffda78..660ea1b 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1,33 +1,14 @@ /* - * File: arch/blackfin/mach-common/ints-priority.c + * Set up the interrupt priorities * - * Description: Set up the interrupt priorities + * Copyright 2004-2009 Analog Devices Inc. + * 2003 Bas Vermeulen <bas@buyways.nl> + * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> + * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> + * 1999 D. Jeff Dionne <jeff@uclinux.org> + * 1996 Roman Zippel * - * Modified: - * 1996 Roman Zippel - * 1999 D. Jeff Dionne <jeff@uclinux.org> - * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * 2003 Metrowerks/Motorola - * 2003 Bas Vermeulen <bas@buyways.nl> - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 */ #include <linux/module.h> diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index 883e324..c6496249 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mach-common/irqpanic.c - * Based on: - * Author: + * panic kernel with dump information * - * Created: ? - * Description: panic kernel with dump information + * Copyright 2005-2009 Analog Devices Inc. * - * Modified: rgetz - added cache checking code 14Feb06 - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 0e3d4ff..8837be4 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -1,35 +1,11 @@ /* - * File: arch/blackfin/mach-common/pm.c - * Based on: arm/mach-omap/pm.c - * Author: Cliff Brake <cbrake@accelent.com> Copyright (c) 2001 + * Blackfin power management * - * Created: 2001 - * Description: Blackfin power management + * Copyright 2006-2009 Analog Devices Inc. * - * Modified: Nicolas Pitre - PXA250 support - * Copyright (c) 2002 Monta Vista Software, Inc. - * David Singleton - OMAP1510 - * Copyright (c) 2002 Monta Vista Software, Inc. - * Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610 - * Copyright 2004 - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 + * based on arm/mach-omap/pm.c + * Copyright 2001, Cliff Brake <cbrake@accelent.com> and others */ #include <linux/suspend.h> diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 349ee3f..d98585f 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -1,24 +1,10 @@ /* - * File: arch/blackfin/kernel/smp.c - * Author: Philippe Gerum <rpm@xenomai.org> - * IPI management based on arch/arm/kernel/smp.c. + * IPI management based on arch/arm/kernel/smp.c (Copyright 2002 ARM Limited) * - * Copyright 2007 Analog Devices Inc. + * Copyright 2007-2009 Analog Devices Inc. + * Philippe Gerum <rpm@xenomai.org> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2. */ #include <linux/module.h> diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h index bc00628..fb0b159 100644 --- a/arch/blackfin/mm/blackfin_sram.h +++ b/arch/blackfin/mm/blackfin_sram.h @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mm/blackfin_sram.h - * Based on: arch/blackfin/mm/blackfin_sram.c - * Author: Mike Frysinger + * Local prototypes meant for internal use only * - * Created: Aug 2006 - * Description: Local prototypes meant for internal use only + * Copyright 2006-2009 Analog Devices Inc. * - * Modified: - * Copyright 2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __BLACKFIN_SRAM_H__ diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index b88ce7f..bb9c98f 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -1,30 +1,7 @@ /* - * File: arch/blackfin/mm/init.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/swap.h> diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c index beb1a60..84cdc5a 100644 --- a/arch/blackfin/mm/isram-driver.c +++ b/arch/blackfin/mm/isram-driver.c @@ -1,19 +1,9 @@ /* - * Description: Instruction SRAM accessor functions for the Blackfin + * Instruction SRAM accessor functions for the Blackfin * * Copyright 2008 Analog Devices Inc. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later */ #define pr_fmt(fmt) "isram: " fmt diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index eb63ab3..f068c11 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -1,30 +1,9 @@ /* - * File: arch/blackfin/mm/sram-alloc.c - * Based on: - * Author: + * SRAM allocator for Blackfin on-chip memory * - * Created: - * Description: SRAM allocator for Blackfin L1 and L2 memory + * Copyright 2004-2009 Analog Devices Inc. * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/module.h> diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 1b7598e..8a88f1f 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/mm.h> #include <linux/smp.h> diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index 594ee0e..9a8876f 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -45,25 +45,25 @@ int main(void) DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); /* offsets into the pt_regs */ - DEFINE(PT_D0, offsetof(struct pt_regs, d0)); - DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0)); - DEFINE(PT_D1, offsetof(struct pt_regs, d1)); - DEFINE(PT_D2, offsetof(struct pt_regs, d2)); - DEFINE(PT_D3, offsetof(struct pt_regs, d3)); - DEFINE(PT_D4, offsetof(struct pt_regs, d4)); - DEFINE(PT_D5, offsetof(struct pt_regs, d5)); - DEFINE(PT_A0, offsetof(struct pt_regs, a0)); - DEFINE(PT_A1, offsetof(struct pt_regs, a1)); - DEFINE(PT_A2, offsetof(struct pt_regs, a2)); - DEFINE(PT_PC, offsetof(struct pt_regs, pc)); - DEFINE(PT_SR, offsetof(struct pt_regs, sr)); + DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0)); + DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0)); + DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1)); + DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2)); + DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3)); + DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4)); + DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5)); + DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0)); + DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1)); + DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2)); + DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc)); + DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr)); #ifdef CONFIG_COLDFIRE /* bitfields are a bit difficult */ - DEFINE(PT_FORMATVEC, offsetof(struct pt_regs, sr) - 2); + DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2); #else /* bitfields are a bit difficult */ - DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4); + DEFINE(PT_OFF_VECTOR, offsetof(struct pt_regs, pc) + 4); #endif /* signal defines */ diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S index f56faa5..56043ad 100644 --- a/arch/m68knommu/kernel/entry.S +++ b/arch/m68knommu/kernel/entry.S @@ -46,7 +46,7 @@ ENTRY(buserr) SAVE_ALL moveq #-1,%d0 - movel %d0,%sp@(PT_ORIG_D0) + movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ jsr buserr_c addql #4,%sp @@ -55,7 +55,7 @@ ENTRY(buserr) ENTRY(trap) SAVE_ALL moveq #-1,%d0 - movel %d0,%sp@(PT_ORIG_D0) + movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ jsr trap_c addql #4,%sp @@ -67,7 +67,7 @@ ENTRY(trap) ENTRY(dbginterrupt) SAVE_ALL moveq #-1,%d0 - movel %d0,%sp@(PT_ORIG_D0) + movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ jsr dbginterrupt_c addql #4,%sp diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c index b1703c6..f3236d0 100644 --- a/arch/m68knommu/mm/init.c +++ b/arch/m68knommu/mm/init.c @@ -162,7 +162,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) totalram_pages++; pages++; } - printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages); + printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages * (PAGE_SIZE / 1024)); } #endif diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c index 0f41ba8..9423979 100644 --- a/arch/m68knommu/platform/5206e/config.c +++ b/arch/m68knommu/platform/5206e/config.c @@ -17,7 +17,6 @@ #include <asm/mcfsim.h> #include <asm/mcfuart.h> #include <asm/mcfdma.h> -#include <asm/mcfuart.h> /***************************************************************************/ diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S index b1aef72..9d80d2c 100644 --- a/arch/m68knommu/platform/68328/entry.S +++ b/arch/m68knommu/platform/68328/entry.S @@ -39,17 +39,17 @@ .globl inthandler7 badsys: - movel #-ENOSYS,%sp@(PT_D0) + movel #-ENOSYS,%sp@(PT_OFF_D0) jra ret_from_exception do_trace: - movel #-ENOSYS,%sp@(PT_D0) /* needed for strace*/ + movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/ subql #4,%sp SAVE_SWITCH_STACK jbsr syscall_trace RESTORE_SWITCH_STACK addql #4,%sp - movel %sp@(PT_ORIG_D0),%d1 + movel %sp@(PT_OFF_ORIG_D0),%d1 movel #-ENOSYS,%d0 cmpl #NR_syscalls,%d1 jcc 1f @@ -57,7 +57,7 @@ do_trace: lea sys_call_table, %a0 jbsr %a0@(%d1) -1: movel %d0,%sp@(PT_D0) /* save the return value */ +1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */ subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK jbsr syscall_trace @@ -75,7 +75,7 @@ ENTRY(system_call) jbsr set_esp0 addql #4,%sp - movel %sp@(PT_ORIG_D0),%d0 + movel %sp@(PT_OFF_ORIG_D0),%d0 movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 @@ -88,10 +88,10 @@ ENTRY(system_call) lea sys_call_table,%a0 movel %a0@(%d0), %a0 jbsr %a0@ - movel %d0,%sp@(PT_D0) /* save the return value*/ + movel %d0,%sp@(PT_OFF_D0) /* save the return value*/ ret_from_exception: - btst #5,%sp@(PT_SR) /* check if returning to kernel*/ + btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/ jeq Luser_return /* if so, skip resched, signals*/ Lkernel_return: @@ -133,7 +133,7 @@ Lreturn: */ inthandler1: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -144,7 +144,7 @@ inthandler1: inthandler2: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -155,7 +155,7 @@ inthandler2: inthandler3: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -166,7 +166,7 @@ inthandler3: inthandler4: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -177,7 +177,7 @@ inthandler4: inthandler5: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -188,7 +188,7 @@ inthandler5: inthandler6: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -199,7 +199,7 @@ inthandler6: inthandler7: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -210,7 +210,7 @@ inthandler7: inthandler: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -224,7 +224,7 @@ ret_from_interrupt: 2: RESTORE_ALL 1: - moveb %sp@(PT_SR), %d0 + moveb %sp@(PT_OFF_SR), %d0 and #7, %d0 jhi 2b diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S index 55dfefe..6d3460a 100644 --- a/arch/m68knommu/platform/68360/entry.S +++ b/arch/m68knommu/platform/68360/entry.S @@ -35,17 +35,17 @@ .globl inthandler badsys: - movel #-ENOSYS,%sp@(PT_D0) + movel #-ENOSYS,%sp@(PT_OFF_D0) jra ret_from_exception do_trace: - movel #-ENOSYS,%sp@(PT_D0) /* needed for strace*/ + movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/ subql #4,%sp SAVE_SWITCH_STACK jbsr syscall_trace RESTORE_SWITCH_STACK addql #4,%sp - movel %sp@(PT_ORIG_D0),%d1 + movel %sp@(PT_OFF_ORIG_D0),%d1 movel #-ENOSYS,%d0 cmpl #NR_syscalls,%d1 jcc 1f @@ -53,7 +53,7 @@ do_trace: lea sys_call_table, %a0 jbsr %a0@(%d1) -1: movel %d0,%sp@(PT_D0) /* save the return value */ +1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */ subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK jbsr syscall_trace @@ -79,10 +79,10 @@ ENTRY(system_call) lea sys_call_table,%a0 movel %a0@(%d0), %a0 jbsr %a0@ - movel %d0,%sp@(PT_D0) /* save the return value*/ + movel %d0,%sp@(PT_OFF_D0) /* save the return value*/ ret_from_exception: - btst #5,%sp@(PT_SR) /* check if returning to kernel*/ + btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/ jeq Luser_return /* if so, skip resched, signals*/ Lkernel_return: @@ -124,7 +124,7 @@ Lreturn: */ inthandler: SAVE_ALL - movew %sp@(PT_VECTOR), %d0 + movew %sp@(PT_OFF_VECTOR), %d0 and.l #0x3ff, %d0 lsr.l #0x02, %d0 @@ -139,7 +139,7 @@ ret_from_interrupt: 2: RESTORE_ALL 1: - moveb %sp@(PT_SR), %d0 + moveb %sp@(PT_OFF_SR), %d0 and #7, %d0 jhi 2b /* check if we need to do software interrupts */ diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S index 3b471c0..dd7d591 100644 --- a/arch/m68knommu/platform/coldfire/entry.S +++ b/arch/m68knommu/platform/coldfire/entry.S @@ -81,11 +81,11 @@ ENTRY(system_call) movel %d3,%a0 jbsr %a0@ - movel %d0,%sp@(PT_D0) /* save the return value */ + movel %d0,%sp@(PT_OFF_D0) /* save the return value */ jra ret_from_exception 1: - movel #-ENOSYS,%d2 /* strace needs -ENOSYS in PT_D0 */ - movel %d2,PT_D0(%sp) /* on syscall entry */ + movel #-ENOSYS,%d2 /* strace needs -ENOSYS in PT_OFF_D0 */ + movel %d2,PT_OFF_D0(%sp) /* on syscall entry */ subql #4,%sp SAVE_SWITCH_STACK jbsr syscall_trace @@ -93,7 +93,7 @@ ENTRY(system_call) addql #4,%sp movel %d3,%a0 jbsr %a0@ - movel %d0,%sp@(PT_D0) /* save the return value */ + movel %d0,%sp@(PT_OFF_D0) /* save the return value */ subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK jbsr syscall_trace @@ -104,7 +104,7 @@ ret_from_signal: ret_from_exception: move #0x2700,%sr /* disable intrs */ - btst #5,%sp@(PT_SR) /* check if returning to kernel */ + btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel */ jeq Luser_return /* if so, skip resched, signals */ #ifdef CONFIG_PREEMPT @@ -142,8 +142,8 @@ Luser_return: Lreturn: move #0x2700,%sr /* disable intrs */ movel sw_usp,%a0 /* get usp */ - movel %sp@(PT_PC),%a0@- /* copy exception program counter */ - movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */ + movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ + movel %sp@(PT_OFF_FORMATVEC),%a0@- /* copy exception format/vector/sr */ moveml %sp@,%d1-%d5/%a0-%a2 lea %sp@(32),%sp /* space for 8 regs */ movel %sp@+,%d0 @@ -181,9 +181,9 @@ Lsignal_return: ENTRY(inthandler) SAVE_ALL moveq #-1,%d0 - movel %d0,%sp@(PT_ORIG_D0) + movel %d0,%sp@(PT_OFF_ORIG_D0) - movew %sp@(PT_FORMATVEC),%d0 /* put exception # in d0 */ + movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */ andl #0x03fc,%d0 /* mask out vector only */ movel %sp,%sp@- /* push regs arg */ @@ -203,7 +203,7 @@ ENTRY(inthandler) ENTRY(fasthandler) SAVE_LOCAL - movew %sp@(PT_FORMATVEC),%d0 + movew %sp@(PT_OFF_FORMATVEC),%d0 andl #0x03fc,%d0 /* mask out vector only */ movel %sp,%sp@- /* push regs arg */ diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index acc1f05..e3ecb36 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -592,6 +592,8 @@ C_ENTRY(full_exception_trap): nop mfs r7, rfsr; /* save FSR */ nop + mts rfsr, r0; /* Clear sticky fsr */ + nop la r12, r0, full_exception set_vms; rtbd r12, 0; diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 6b0288e..2b86c03 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -384,7 +384,7 @@ handle_other_ex: /* Handle Other exceptions here */ addk r8, r17, r0; /* Load exception address */ bralid r15, full_exception; /* Branch to the handler */ nop; - mts r0, rfsr; /* Clear sticky fsr */ + mts rfsr, r0; /* Clear sticky fsr */ nop /* diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 4201c743..c592d47 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -235,7 +235,9 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) regs->pc = pc; regs->r1 = usp; regs->pt_mode = 0; +#ifdef CONFIG_MMU regs->msr |= MSR_UMS; +#endif } #ifdef CONFIG_MMU diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index f388dc6..524d935 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -18,6 +18,7 @@ config PARISC select BUG select HAVE_PERF_EVENTS select GENERIC_ATOMIC64 if !64BIT + select HAVE_ARCH_TRACEHOOK help The PA-RISC microprocessor is designed by Hewlett-Packard and used in many of their workstations & servers (HP9000 700 and 800 series, diff --git a/arch/parisc/include/asm/fixmap.h b/arch/parisc/include/asm/fixmap.h index de3fe3a..6fec4d4 100644 --- a/arch/parisc/include/asm/fixmap.h +++ b/arch/parisc/include/asm/fixmap.h @@ -21,9 +21,9 @@ #define KERNEL_MAP_END (TMPALIAS_MAP_START) #ifndef __ASSEMBLY__ -extern void *vmalloc_start; +extern void *parisc_vmalloc_start; #define PCXL_DMA_MAP_SIZE (8*1024*1024) -#define VMALLOC_START ((unsigned long)vmalloc_start) +#define VMALLOC_START ((unsigned long)parisc_vmalloc_start) #define VMALLOC_END (KERNEL_MAP_END) #endif /*__ASSEMBLY__*/ diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index ce93133..0d68184 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -1,29 +1,11 @@ /* hardirq.h: PA-RISC hard IRQ support. * * Copyright (C) 2001 Matthew Wilcox <matthew@wil.cx> - * - * The locking is really quite interesting. There's a cpu-local - * count of how many interrupts are being handled, and a global - * lock. An interrupt can only be serviced if the global lock - * is free. You can't be sure no more interrupts are being - * serviced until you've acquired the lock and then checked - * all the per-cpu interrupt counts are all zero. It's a specialised - * br_lock, and that's exactly how Sparc does it. We don't because - * it's more locking for us. This way is lock-free in the interrupt path. */ #ifndef _PARISC_HARDIRQ_H #define _PARISC_HARDIRQ_H -#include <linux/threads.h> -#include <linux/irq.h> - -typedef struct { - unsigned long __softirq_pending; /* set_bit is used on this */ -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -void ack_bad_irq(unsigned int irq); +#include <asm-generic/hardirq.h> #endif /* _PARISC_HARDIRQ_H */ diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h index 302f68d..aead40b 100644 --- a/arch/parisc/include/asm/ptrace.h +++ b/arch/parisc/include/asm/ptrace.h @@ -59,8 +59,11 @@ void user_enable_block_step(struct task_struct *task); #define user_mode(regs) (((regs)->iaoq[0] & 3) ? 1 : 0) #define user_space(regs) (((regs)->iasq[1] != 0) ? 1 : 0) #define instruction_pointer(regs) ((regs)->iaoq[0] & ~3) +#define user_stack_pointer(regs) ((regs)->gr[30]) unsigned long profile_pc(struct pt_regs *); extern void show_regs(struct pt_regs *); -#endif + + +#endif /* __KERNEL__ */ #endif diff --git a/arch/parisc/include/asm/syscall.h b/arch/parisc/include/asm/syscall.h new file mode 100644 index 0000000..8bdfd2c --- /dev/null +++ b/arch/parisc/include/asm/syscall.h @@ -0,0 +1,40 @@ +/* syscall.h */ + +#ifndef _ASM_PARISC_SYSCALL_H_ +#define _ASM_PARISC_SYSCALL_H_ + +#include <linux/err.h> +#include <asm/ptrace.h> + +static inline long syscall_get_nr(struct task_struct *tsk, + struct pt_regs *regs) +{ + return regs->gr[20]; +} + +static inline void syscall_get_arguments(struct task_struct *tsk, + struct pt_regs *regs, unsigned int i, + unsigned int n, unsigned long *args) +{ + BUG_ON(i); + + switch (n) { + case 6: + args[5] = regs->gr[21]; + case 5: + args[4] = regs->gr[22]; + case 4: + args[3] = regs->gr[23]; + case 3: + args[2] = regs->gr[24]; + case 2: + args[1] = regs->gr[25]; + case 1: + args[0] = regs->gr[26]; + break; + default: + BUG(); + } +} + +#endif /*_ASM_PARISC_SYSCALL_H_*/ diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h index ac775a7..7ecc103 100644 --- a/arch/parisc/include/asm/thread_info.h +++ b/arch/parisc/include/asm/thread_info.h @@ -32,6 +32,11 @@ struct thread_info { #define init_thread_info (init_thread_union.thread_info) #define init_stack (init_thread_union.stack) +/* how to get the thread information struct from C */ +#define current_thread_info() ((struct thread_info *)mfctl(30)) + +#endif /* !__ASSEMBLY */ + /* thread information allocation */ #define THREAD_SIZE_ORDER 2 @@ -40,11 +45,6 @@ struct thread_info { #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) #define THREAD_SHIFT (PAGE_SHIFT + THREAD_SIZE_ORDER) -/* how to get the thread information struct from C */ -#define current_thread_info() ((struct thread_info *)mfctl(30)) - -#endif /* !__ASSEMBLY */ - #define PREEMPT_ACTIVE_BIT 28 #define PREEMPT_ACTIVE (1 << PREEMPT_ACTIVE_BIT) @@ -60,6 +60,8 @@ struct thread_info { #define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */ #define TIF_FREEZE 7 /* is freezing for suspend */ #define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ +#define TIF_SINGLESTEP 9 /* single stepping? */ +#define TIF_BLOCKSTEP 10 /* branch stepping? */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -69,6 +71,8 @@ struct thread_info { #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP) #define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \ _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK) diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index 699cf8e..fcd3c70 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -270,8 +270,8 @@ int main(void) DEFINE(DTLB_OFF_COUNT, offsetof(struct pdc_cache_info, dt_off_count)); DEFINE(DTLB_LOOP, offsetof(struct pdc_cache_info, dt_loop)); BLANK(); - DEFINE(PA_BLOCKSTEP_BIT, 31-PT_BLOCKSTEP_BIT); - DEFINE(PA_SINGLESTEP_BIT, 31-PT_SINGLESTEP_BIT); + DEFINE(TIF_BLOCKSTEP_PA_BIT, 31-TIF_BLOCKSTEP); + DEFINE(TIF_SINGLESTEP_PA_BIT, 31-TIF_SINGLESTEP); BLANK(); DEFINE(ASM_PMD_SHIFT, PMD_SHIFT); DEFINE(ASM_PGDIR_SHIFT, PGDIR_SHIFT); diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 8c4712b..3a44f7f 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -2047,12 +2047,13 @@ syscall_do_signal: b,n syscall_check_sig syscall_restore: - /* Are we being ptraced? */ LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 - ldw TASK_PTRACE(%r1), %r19 - bb,< %r19,31,syscall_restore_rfi - nop + /* Are we being ptraced? */ + ldw TASK_FLAGS(%r1),%r19 + ldi (_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2 + and,COND(=) %r19,%r2,%r0 + b,n syscall_restore_rfi ldo TASK_PT_FR31(%r1),%r19 /* reload fpregs */ rest_fp %r19 @@ -2113,16 +2114,16 @@ syscall_restore_rfi: ldi 0x0b,%r20 /* Create new PSW */ depi -1,13,1,%r20 /* C, Q, D, and I bits */ - /* The values of PA_SINGLESTEP_BIT and PA_BLOCKSTEP_BIT are - * set in include/linux/ptrace.h and converted to PA bitmap + /* The values of SINGLESTEP_BIT and BLOCKSTEP_BIT are + * set in thread_info.h and converted to PA bitmap * numbers in asm-offsets.c */ - /* if ((%r19.PA_SINGLESTEP_BIT)) { %r20.27=1} */ - extru,= %r19,PA_SINGLESTEP_BIT,1,%r0 + /* if ((%r19.SINGLESTEP_BIT)) { %r20.27=1} */ + extru,= %r19,TIF_SINGLESTEP_PA_BIT,1,%r0 depi -1,27,1,%r20 /* R bit */ - /* if ((%r19.PA_BLOCKSTEP_BIT)) { %r20.7=1} */ - extru,= %r19,PA_BLOCKSTEP_BIT,1,%r0 + /* if ((%r19.BLOCKSTEP_BIT)) { %r20.7=1} */ + extru,= %r19,TIF_BLOCKSTEP_PA_BIT,1,%r0 depi -1,7,1,%r20 /* T bit */ STREG %r20,TASK_PT_PSW(%r1) diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 330f536..2e7610c 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -423,8 +423,3 @@ void __init init_IRQ(void) set_eiem(cpu_eiem); /* EIEM : enable all external intr */ } - -void ack_bad_irq(unsigned int irq) -{ - printk(KERN_WARNING "unexpected IRQ %d\n", irq); -} diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c index 61ee0ee..2120746 100644 --- a/arch/parisc/kernel/module.c +++ b/arch/parisc/kernel/module.c @@ -893,7 +893,7 @@ int module_finalize(const Elf_Ehdr *hdr, * ourselves */ for (i = 1; i < hdr->e_shnum; i++) { if(sechdrs[i].sh_type == SHT_SYMTAB - && (sechdrs[i].sh_type & SHF_ALLOC)) { + && (sechdrs[i].sh_flags & SHF_ALLOC)) { int strindex = sechdrs[i].sh_link; /* FIXME: AWFUL HACK * The cast is to drop the const from diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 927db36..c4f49e4 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <linux/errno.h> #include <linux/ptrace.h> +#include <linux/tracehook.h> #include <linux/user.h> #include <linux/personality.h> #include <linux/security.h> @@ -35,7 +36,8 @@ */ void ptrace_disable(struct task_struct *task) { - task->ptrace &= ~(PT_SINGLESTEP|PT_BLOCKSTEP); + clear_tsk_thread_flag(task, TIF_SINGLESTEP); + clear_tsk_thread_flag(task, TIF_BLOCKSTEP); /* make sure the trap bits are not set */ pa_psw(task)->r = 0; @@ -55,8 +57,8 @@ void user_disable_single_step(struct task_struct *task) void user_enable_single_step(struct task_struct *task) { - task->ptrace &= ~PT_BLOCKSTEP; - task->ptrace |= PT_SINGLESTEP; + clear_tsk_thread_flag(task, TIF_BLOCKSTEP); + set_tsk_thread_flag(task, TIF_SINGLESTEP); if (pa_psw(task)->n) { struct siginfo si; @@ -98,8 +100,8 @@ void user_enable_single_step(struct task_struct *task) void user_enable_block_step(struct task_struct *task) { - task->ptrace &= ~PT_SINGLESTEP; - task->ptrace |= PT_BLOCKSTEP; + clear_tsk_thread_flag(task, TIF_SINGLESTEP); + set_tsk_thread_flag(task, TIF_BLOCKSTEP); /* Enable taken branch trap. */ pa_psw(task)->r = 0; @@ -263,22 +265,20 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, } #endif +long do_syscall_trace_enter(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + return -1L; + + return regs->gr[20]; +} -void syscall_trace(void) +void do_syscall_trace_exit(struct pt_regs *regs) { - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } + int stepping = test_thread_flag(TIF_SINGLESTEP) || + test_thread_flag(TIF_BLOCKSTEP); + + if (stepping || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, stepping); } diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 8eb3c63..e8467e4 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -21,6 +21,7 @@ #include <linux/errno.h> #include <linux/wait.h> #include <linux/ptrace.h> +#include <linux/tracehook.h> #include <linux/unistd.h> #include <linux/stddef.h> #include <linux/compat.h> @@ -34,7 +35,6 @@ #include <asm/asm-offsets.h> #ifdef CONFIG_COMPAT -#include <linux/compat.h> #include "signal32.h" #endif @@ -468,6 +468,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigaddset(¤t->blocked,sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); + + tracehook_signal_handler(sig, info, ka, regs, 0); + return 1; } diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 59fc1a43..f5f9602 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -288,18 +288,23 @@ tracesys: STREG %r18,PT_GR18(%r2) /* Finished saving things for the debugger */ - ldil L%syscall_trace,%r1 + copy %r2,%r26 + ldil L%do_syscall_trace_enter,%r1 ldil L%tracesys_next,%r2 - be R%syscall_trace(%sr7,%r1) + be R%do_syscall_trace_enter(%sr7,%r1) ldo R%tracesys_next(%r2),%r2 -tracesys_next: +tracesys_next: + /* do_syscall_trace_enter either returned the syscallno, or -1L, + * so we skip restoring the PT_GR20 below, since we pulled it from + * task->thread.regs.gr[20] above. + */ + copy %ret0,%r20 ldil L%sys_call_table,%r1 ldo R%sys_call_table(%r1), %r19 ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG TI_TASK(%r1), %r1 - LDREG TASK_PT_GR20(%r1), %r20 LDREG TASK_PT_GR26(%r1), %r26 /* Restore the users args */ LDREG TASK_PT_GR25(%r1), %r25 LDREG TASK_PT_GR24(%r1), %r24 @@ -336,7 +341,8 @@ tracesys_exit: #ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif - bl syscall_trace, %r2 + ldo TASK_REGS(%r1),%r26 + bl do_syscall_trace_exit,%r2 STREG %r28,TASK_PT_GR28(%r1) /* save return value now */ ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG TI_TASK(%r1), %r1 @@ -353,12 +359,12 @@ tracesys_exit: tracesys_sigexit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ - LDREG 0(%r1), %r1 + LDREG TI_TASK(%r1), %r1 #ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif - bl syscall_trace, %r2 - nop + bl do_syscall_trace_exit,%r2 + ldo TASK_REGS(%r1),%r26 ldil L%syscall_exit_rfi,%r1 be,n R%syscall_exit_rfi(%sr7,%r1) diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 775be27..fda4baa 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -28,6 +28,7 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/asm-offsets.h> +#include <asm/thread_info.h> /* ld script to make hppa Linux kernel */ #ifndef CONFIG_64BIT @@ -134,6 +135,15 @@ SECTIONS __init_begin = .; INIT_TEXT_SECTION(16384) INIT_DATA_SECTION(16) + /* we have to discard exit text and such at runtime, not link time */ + .exit.text : + { + EXIT_TEXT + } + .exit.data : + { + EXIT_DATA + } PERCPU(PAGE_SIZE) . = ALIGN(PAGE_SIZE); diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index d5aca31..13b6e3e 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -434,8 +434,8 @@ void mark_rodata_ro(void) #define SET_MAP_OFFSET(x) ((void *)(((unsigned long)(x) + VM_MAP_OFFSET) \ & ~(VM_MAP_OFFSET-1))) -void *vmalloc_start __read_mostly; -EXPORT_SYMBOL(vmalloc_start); +void *parisc_vmalloc_start __read_mostly; +EXPORT_SYMBOL(parisc_vmalloc_start); #ifdef CONFIG_PA11 unsigned long pcxl_dma_start __read_mostly; @@ -496,13 +496,14 @@ void __init mem_init(void) #ifdef CONFIG_PA11 if (hppa_dma_ops == &pcxl_dma_ops) { pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START); - vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start + PCXL_DMA_MAP_SIZE); + parisc_vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start + + PCXL_DMA_MAP_SIZE); } else { pcxl_dma_start = 0; - vmalloc_start = SET_MAP_OFFSET(MAP_START); + parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START); } #else - vmalloc_start = SET_MAP_OFFSET(MAP_START); + parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START); #endif printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n", diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h index a356c95..8a096b8 100644 --- a/arch/s390/include/asm/delay.h +++ b/arch/s390/include/asm/delay.h @@ -14,10 +14,11 @@ #ifndef _S390_DELAY_H #define _S390_DELAY_H -extern void __udelay(unsigned long usecs); -extern void udelay_simple(unsigned long usecs); +extern void __udelay(unsigned long long usecs); +extern void udelay_simple(unsigned long long usecs); extern void __delay(unsigned long loops); -#define udelay(n) __udelay(n) +#define udelay(n) __udelay((unsigned long long) (n)) +#define mdelay(n) __udelay((unsigned long long) (n) * 1000) #endif /* defined(_S390_DELAY_H) */ diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 74d0bbb..e885442 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -92,6 +92,18 @@ /* Keep this the last entry. */ #define R_390_NUM 61 +/* Bits present in AT_HWCAP. */ +#define HWCAP_S390_ESAN3 1 +#define HWCAP_S390_ZARCH 2 +#define HWCAP_S390_STFLE 4 +#define HWCAP_S390_MSA 8 +#define HWCAP_S390_LDISP 16 +#define HWCAP_S390_EIMM 32 +#define HWCAP_S390_DFP 64 +#define HWCAP_S390_HPAGE 128 +#define HWCAP_S390_ETF3EH 256 +#define HWCAP_S390_HIGH_GPRS 512 + /* * These are used to set parameters in the core dumps. */ diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index 539263f..95dcf18 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -311,6 +311,10 @@ typedef struct __u32 orig_gpr2; } s390_compat_regs; +typedef struct +{ + __u32 gprs_high[NUM_GPRS]; +} s390_compat_regs_high; #ifdef __KERNEL__ diff --git a/arch/s390/include/asm/ucontext.h b/arch/s390/include/asm/ucontext.h index d69bec0..cfb874e 100644 --- a/arch/s390/include/asm/ucontext.h +++ b/arch/s390/include/asm/ucontext.h @@ -9,6 +9,21 @@ #ifndef _ASM_S390_UCONTEXT_H #define _ASM_S390_UCONTEXT_H +#define UC_EXTENDED 0x00000001 + +#ifndef __s390x__ + +struct ucontext_extended { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + _sigregs uc_mcontext; + unsigned long uc_sigmask[2]; + unsigned long uc_gprs_high[16]; +}; + +#endif + struct ucontext { unsigned long uc_flags; struct ucontext *uc_link; diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index b537cb0..eee9998 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -39,6 +39,7 @@ typedef struct struct sigcontext32 sc; _sigregs32 sregs; int signo; + __u32 gprs_high[NUM_GPRS]; __u8 retcode[S390_SYSCALL_SIZE]; } sigframe32; @@ -48,6 +49,7 @@ typedef struct __u8 retcode[S390_SYSCALL_SIZE]; compat_siginfo_t info; struct ucontext32 uc; + __u32 gprs_high[NUM_GPRS]; } rt_sigframe32; int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) @@ -344,6 +346,30 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) return 0; } +static int save_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs) +{ + __u32 gprs_high[NUM_GPRS]; + int i; + + for (i = 0; i < NUM_GPRS; i++) + gprs_high[i] = regs->gprs[i] >> 32; + + return __copy_to_user(uregs, &gprs_high, sizeof(gprs_high)); +} + +static int restore_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs) +{ + __u32 gprs_high[NUM_GPRS]; + int err, i; + + err = __copy_from_user(&gprs_high, uregs, sizeof(gprs_high)); + if (err) + return err; + for (i = 0; i < NUM_GPRS; i++) + *(__u32 *)®s->gprs[i] = gprs_high[i]; + return 0; +} + asmlinkage long sys32_sigreturn(void) { struct pt_regs *regs = task_pt_regs(current); @@ -363,6 +389,8 @@ asmlinkage long sys32_sigreturn(void) if (restore_sigregs32(regs, &frame->sregs)) goto badframe; + if (restore_sigregs_gprs_high(regs, frame->gprs_high)) + goto badframe; return regs->gprs[2]; @@ -394,6 +422,8 @@ asmlinkage long sys32_rt_sigreturn(void) if (restore_sigregs32(regs, &frame->uc.uc_mcontext)) goto badframe; + if (restore_sigregs_gprs_high(regs, frame->gprs_high)) + goto badframe; err = __get_user(ss_sp, &frame->uc.uc_stack.ss_sp); st.ss_sp = compat_ptr(ss_sp); @@ -474,6 +504,8 @@ static int setup_frame32(int sig, struct k_sigaction *ka, if (save_sigregs32(regs, &frame->sregs)) goto give_sigsegv; + if (save_sigregs_gprs_high(regs, frame->gprs_high)) + goto give_sigsegv; if (__put_user((unsigned long) &frame->sregs, &frame->sc.sregs)) goto give_sigsegv; @@ -529,13 +561,14 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(UC_EXTENDED, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->gprs[15]), &frame->uc.uc_stack.ss_flags); err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); err |= save_sigregs32(regs, &frame->uc.uc_mcontext); + err |= save_sigregs_gprs_high(regs, frame->gprs_high); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) goto give_sigsegv; diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 682fb69..cbd9901 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -409,7 +409,7 @@ sys32_munmap_wrapper: .globl sys32_truncate_wrapper sys32_truncate_wrapper: llgtr %r2,%r2 # const char * - llgfr %r3,%r3 # unsigned long + lgfr %r3,%r3 # long jg sys_truncate # branch to system call .globl sys32_ftruncate_wrapper diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 57bdcb1..f5fe34d 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -185,9 +185,6 @@ unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent) { struct ftrace_graph_ent trace; - /* Nmi's are currently unsupported. */ - if (unlikely(in_nmi())) - goto out; if (unlikely(atomic_read(¤t->tracing_graph_pause))) goto out; if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY) diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c index ab2e3ed..639380a 100644 --- a/arch/s390/kernel/module.c +++ b/arch/s390/kernel/module.c @@ -55,6 +55,8 @@ void *module_alloc(unsigned long size) /* Free memory returned from module_alloc */ void module_free(struct module *mod, void *module_region) { + vfree(mod->arch.syminfo); + mod->arch.syminfo = NULL; vfree(module_region); } @@ -402,6 +404,7 @@ int module_finalize(const Elf_Ehdr *hdr, struct module *me) { vfree(me->arch.syminfo); + me->arch.syminfo = NULL; return module_bug_finalize(hdr, sechdrs, me); } diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index a873867..653c6a1 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -57,6 +57,7 @@ enum s390_regset { REGSET_GENERAL, REGSET_FP, + REGSET_GENERAL_EXTENDED, }; static void @@ -879,6 +880,67 @@ static int s390_compat_regs_set(struct task_struct *target, return rc; } +static int s390_compat_regs_high_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + compat_ulong_t *gprs_high; + + gprs_high = (compat_ulong_t *) + &task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)]; + if (kbuf) { + compat_ulong_t *k = kbuf; + while (count > 0) { + *k++ = *gprs_high; + gprs_high += 2; + count -= sizeof(*k); + } + } else { + compat_ulong_t __user *u = ubuf; + while (count > 0) { + if (__put_user(*gprs_high, u++)) + return -EFAULT; + gprs_high += 2; + count -= sizeof(*u); + } + } + return 0; +} + +static int s390_compat_regs_high_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + compat_ulong_t *gprs_high; + int rc = 0; + + gprs_high = (compat_ulong_t *) + &task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)]; + if (kbuf) { + const compat_ulong_t *k = kbuf; + while (count > 0) { + *gprs_high = *k++; + *gprs_high += 2; + count -= sizeof(*k); + } + } else { + const compat_ulong_t __user *u = ubuf; + while (count > 0 && !rc) { + unsigned long word; + rc = __get_user(word, u++); + if (rc) + break; + *gprs_high = word; + *gprs_high += 2; + count -= sizeof(*u); + } + } + + return rc; +} + static const struct user_regset s390_compat_regsets[] = { [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, @@ -896,6 +958,14 @@ static const struct user_regset s390_compat_regsets[] = { .get = s390_fpregs_get, .set = s390_fpregs_set, }, + [REGSET_GENERAL_EXTENDED] = { + .core_note_type = NT_PRXSTATUS, + .n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t), + .size = sizeof(compat_long_t), + .align = sizeof(compat_long_t), + .get = s390_compat_regs_high_get, + .set = s390_compat_regs_high_set, + }, }; static const struct user_regset_view user_s390_compat_view = { diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 9ed13a1..061479f 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -729,7 +729,7 @@ static void __init setup_hwcaps(void) if ((facility_list & (1UL << (31 - 22))) && (facility_list & (1UL << (31 - 30)))) - elf_hwcap |= 1UL << 8; + elf_hwcap |= HWCAP_S390_ETF3EH; /* * Check for additional facilities with store-facility-list-extended. @@ -748,11 +748,20 @@ static void __init setup_hwcaps(void) __stfle(&facility_list_extended, 1) > 0) { if ((facility_list_extended & (1ULL << (63 - 42))) && (facility_list_extended & (1ULL << (63 - 44)))) - elf_hwcap |= 1UL << 6; + elf_hwcap |= HWCAP_S390_DFP; } + /* + * Huge page support HWCAP_S390_HPAGE is bit 7. + */ if (MACHINE_HAS_HPAGE) - elf_hwcap |= 1UL << 7; + elf_hwcap |= HWCAP_S390_HPAGE; + + /* + * 64-bit register support for 31-bit processes + * HWCAP_S390_HIGH_GPRS is bit 9. + */ + elf_hwcap |= HWCAP_S390_HIGH_GPRS; switch (S390_lowcore.cpu_id.machine) { case 0x9672: diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S index fe927d0..7c8653e 100644 --- a/arch/s390/kernel/swsusp_asm64.S +++ b/arch/s390/kernel/swsusp_asm64.S @@ -43,7 +43,7 @@ swsusp_arch_suspend: lghi %r1,0x1000 /* Save CPU address */ - stap __LC_CPU_ADDRESS(%r1) + stap __LC_CPU_ADDRESS(%r0) /* Store registers */ mvc 0x318(4,%r1),__SF_EMPTY(%r15) /* move prefix to lowcore */ @@ -69,8 +69,21 @@ swsusp_arch_suspend: stmg %r0,%r15,0x280(%r1) /* store general registers */ stpt 0x328(%r1) /* store timer */ + stck __SF_EMPTY(%r15) /* store clock */ stckc 0x330(%r1) /* store clock comparator */ + /* Update cputime accounting before going to sleep */ + lg %r0,__LC_LAST_UPDATE_TIMER + slg %r0,0x328(%r1) + alg %r0,__LC_SYSTEM_TIMER + stg %r0,__LC_SYSTEM_TIMER + mvc __LC_LAST_UPDATE_TIMER(8),0x328(%r1) + lg %r0,__LC_LAST_UPDATE_CLOCK + slg %r0,__SF_EMPTY(%r15) + alg %r0,__LC_STEAL_TIMER + stg %r0,__LC_STEAL_TIMER + mvc __LC_LAST_UPDATE_CLOCK(8),__SF_EMPTY(%r15) + /* Activate DAT */ stosm __SF_EMPTY(%r15),0x04 @@ -159,8 +172,7 @@ pgm_check_entry: larl %r1,.Lresume_cpu /* Resume CPU address: r2 */ stap 0(%r1) llgh %r2,0(%r1) - lghi %r3,0x1000 - llgh %r1,__LC_CPU_ADDRESS(%r3) /* Suspend CPU address: r1 */ + llgh %r1,__LC_CPU_ADDRESS(%r0) /* Suspend CPU address: r1 */ cgr %r1,%r2 je restore_registers /* r1 = r2 -> nothing to do */ larl %r4,.Lrestart_suspend_psw /* Set new restart PSW */ @@ -200,8 +212,11 @@ restart_suspend: restore_registers: /* Restore registers */ - lghi %r13,0x1000 /* %r1 = pointer to save arae */ + lghi %r13,0x1000 /* %r1 = pointer to save area */ + /* Ignore time spent in suspended state. */ + llgf %r1,0x318(%r13) + stck __LC_LAST_UPDATE_CLOCK(%r1) spt 0x328(%r13) /* reprogram timer */ //sckc 0x330(%r13) /* set clock comparator */ @@ -229,9 +244,6 @@ restore_registers: /* Load old stack */ lg %r15,0x2f8(%r13) - /* Pointer to save area */ - lghi %r13,0x1000 - /* Restore prefix register */ spx 0x318(%r13) diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c index 45a3e9a..adfb32a 100644 --- a/arch/s390/kernel/vdso.c +++ b/arch/s390/kernel/vdso.c @@ -247,6 +247,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) } /* + * Put vDSO base into mm struct. We need to do this before calling + * install_special_mapping or the perf counter mmap tracking code + * will fail to recognise it as a vDSO (since arch_vma_name fails). + */ + current->mm->context.vdso_base = vdso_base; + + /* * our vma flags don't have VM_WRITE so by default, the process * isn't allowed to write those pages. * gdb can break that with ptrace interface, and thus trigger COW @@ -267,14 +274,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) VM_ALWAYSDUMP, vdso_pagelist); if (rc) - goto out_up; - - /* Put vDSO base into mm struct */ - current->mm->context.vdso_base = vdso_base; - - up_write(&mm->mmap_sem); - return 0; - + current->mm->context.vdso_base = 0; out_up: up_write(&mm->mmap_sem); return rc; diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index bc15ef9..a68ac10 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -51,6 +51,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); _eshared = .; /* End of shareable data */ + _sdata = .; /* Start of data section */ EXCEPTION_TABLE(16) :data diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h index ec5eee7..06cce82 100644 --- a/arch/s390/kvm/kvm-s390.h +++ b/arch/s390/kvm/kvm-s390.h @@ -58,7 +58,7 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code); int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action); -static inline int kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu) +static inline long kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu) { return vcpu->arch.sie_block->gmslm - vcpu->arch.sie_block->gmsor diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 97c1eca8..752b362 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -25,13 +25,13 @@ void __delay(unsigned long loops) asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1)); } -static void __udelay_disabled(unsigned long usecs) +static void __udelay_disabled(unsigned long long usecs) { unsigned long mask, cr0, cr0_saved; u64 clock_saved; clock_saved = local_tick_disable(); - set_clock_comparator(get_clock() + ((u64) usecs << 12)); + set_clock_comparator(get_clock() + (usecs << 12)); __ctl_store(cr0_saved, 0, 0); cr0 = (cr0_saved & 0xffff00e0) | 0x00000800; __ctl_load(cr0 , 0, 0); @@ -46,20 +46,25 @@ static void __udelay_disabled(unsigned long usecs) set_clock_comparator(S390_lowcore.clock_comparator); } -static void __udelay_enabled(unsigned long usecs) +static void __udelay_enabled(unsigned long long usecs) { unsigned long mask; - u64 end, time; + u64 clock_saved; + u64 end; mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO; - end = get_clock() + ((u64) usecs << 12); + end = get_clock() + (usecs << 12); do { - time = end < S390_lowcore.clock_comparator ? - end : S390_lowcore.clock_comparator; - set_clock_comparator(time); + clock_saved = 0; + if (end < S390_lowcore.clock_comparator) { + clock_saved = local_tick_disable(); + set_clock_comparator(end); + } trace_hardirqs_on(); __load_psw_mask(mask); local_irq_disable(); + if (clock_saved) + local_tick_enable(clock_saved); } while (get_clock() < end); set_clock_comparator(S390_lowcore.clock_comparator); } @@ -67,7 +72,7 @@ static void __udelay_enabled(unsigned long usecs) /* * Waits for 'usecs' microseconds using the TOD clock comparator. */ -void __udelay(unsigned long usecs) +void __udelay(unsigned long long usecs) { unsigned long flags; @@ -101,11 +106,11 @@ EXPORT_SYMBOL(__udelay); * Simple udelay variant. To be used on startup and reboot * when the interrupt handler isn't working. */ -void udelay_simple(unsigned long usecs) +void udelay_simple(unsigned long long usecs) { u64 end; - end = get_clock() + ((u64) usecs << 12); + end = get_clock() + (usecs << 12); while (get_clock() < end) cpu_relax(); } diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c index 3f15aaf..58da3f4 100644 --- a/arch/s390/lib/uaccess_mvcos.c +++ b/arch/s390/lib/uaccess_mvcos.c @@ -36,7 +36,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) tmp1 = -4096UL; asm volatile( "0: .insn ss,0xc80000000000,0(%0,%2),0(%1),0\n" - " jz 7f\n" + "9: jz 7f\n" "1:"ALR" %0,%3\n" " "SLR" %1,%3\n" " "SLR" %2,%3\n" @@ -47,7 +47,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) " "CLR" %0,%4\n" /* copy crosses next page boundary? */ " jnh 4f\n" "3: .insn ss,0xc80000000000,0(%4,%2),0(%1),0\n" - " "SLR" %0,%4\n" + "10:"SLR" %0,%4\n" " "ALR" %2,%4\n" "4:"LHI" %4,-1\n" " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ @@ -61,7 +61,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) " j 8f\n" "7:"SLR" %0,%0\n" "8: \n" - EX_TABLE(0b,2b) EX_TABLE(3b,4b) + EX_TABLE(0b,2b) EX_TABLE(3b,4b) EX_TABLE(9b,2b) EX_TABLE(10b,4b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : "d" (reg0) : "cc", "memory"); return size; @@ -82,7 +82,7 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x) tmp1 = -4096UL; asm volatile( "0: .insn ss,0xc80000000000,0(%0,%1),0(%2),0\n" - " jz 4f\n" + "6: jz 4f\n" "1:"ALR" %0,%3\n" " "SLR" %1,%3\n" " "SLR" %2,%3\n" @@ -93,11 +93,11 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x) " "CLR" %0,%4\n" /* copy crosses next page boundary? */ " jnh 5f\n" "3: .insn ss,0xc80000000000,0(%4,%1),0(%2),0\n" - " "SLR" %0,%4\n" + "7:"SLR" %0,%4\n" " j 5f\n" "4:"SLR" %0,%0\n" "5: \n" - EX_TABLE(0b,2b) EX_TABLE(3b,5b) + EX_TABLE(0b,2b) EX_TABLE(3b,5b) EX_TABLE(6b,2b) EX_TABLE(7b,5b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : "d" (reg0) : "cc", "memory"); return size; diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c index d2ffbad..07deaee 100644 --- a/arch/s390/lib/uaccess_std.c +++ b/arch/s390/lib/uaccess_std.c @@ -36,12 +36,12 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x) tmp1 = -256UL; asm volatile( "0: mvcp 0(%0,%2),0(%1),%3\n" - " jz 8f\n" + "10:jz 8f\n" "1:"ALR" %0,%3\n" " la %1,256(%1)\n" " la %2,256(%2)\n" "2: mvcp 0(%0,%2),0(%1),%3\n" - " jnz 1b\n" + "11:jnz 1b\n" " j 8f\n" "3: la %4,255(%1)\n" /* %4 = ptr + 255 */ " "LHI" %3,-4096\n" @@ -50,7 +50,7 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x) " "CLR" %0,%4\n" /* copy crosses next page boundary? */ " jnh 5f\n" "4: mvcp 0(%4,%2),0(%1),%3\n" - " "SLR" %0,%4\n" + "12:"SLR" %0,%4\n" " "ALR" %2,%4\n" "5:"LHI" %4,-1\n" " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ @@ -65,6 +65,7 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x) "8:"SLR" %0,%0\n" "9: \n" EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b) + EX_TABLE(10b,3b) EX_TABLE(11b,3b) EX_TABLE(12b,5b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : : "cc", "memory"); return size; @@ -85,12 +86,12 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x) tmp1 = -256UL; asm volatile( "0: mvcs 0(%0,%1),0(%2),%3\n" - " jz 5f\n" + "7: jz 5f\n" "1:"ALR" %0,%3\n" " la %1,256(%1)\n" " la %2,256(%2)\n" "2: mvcs 0(%0,%1),0(%2),%3\n" - " jnz 1b\n" + "8: jnz 1b\n" " j 5f\n" "3: la %4,255(%1)\n" /* %4 = ptr + 255 */ " "LHI" %3,-4096\n" @@ -99,11 +100,12 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x) " "CLR" %0,%4\n" /* copy crosses next page boundary? */ " jnh 6f\n" "4: mvcs 0(%4,%1),0(%2),%3\n" - " "SLR" %0,%4\n" + "9:"SLR" %0,%4\n" " j 6f\n" "5:"SLR" %0,%0\n" "6: \n" EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b) + EX_TABLE(7b,3b) EX_TABLE(8b,3b) EX_TABLE(9b,6b) : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) : : "cc", "memory"); return size; diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index c60bfb3..2757c56 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -279,7 +279,10 @@ int s390_enable_sie(void) /* lets check if we are allowed to replace the mm */ task_lock(tsk); if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 || - tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) { +#ifdef CONFIG_AIO + !hlist_empty(&tsk->mm->ioctx_list) || +#endif + tsk->mm != tsk->active_mm) { task_unlock(tsk); return -EINVAL; } @@ -295,7 +298,10 @@ int s390_enable_sie(void) /* Now lets check again if something happened */ task_lock(tsk); if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 || - tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) { +#ifdef CONFIG_AIO + !hlist_empty(&tsk->mm->ioctx_list) || +#endif + tsk->mm != tsk->active_mm) { mmput(mm); task_unlock(tsk); return -EINVAL; diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 0a37c8b..99ffc5f 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -205,8 +205,6 @@ static void __init setup_port_multiplexing(void) static void __init mpr2_setup(char **cmdline_p) { - __set_io_port_base(0xa0000000); - /* set Pin Select Register A: * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c index ebe9922..a4b7402 100644 --- a/arch/sh/boards/mach-dreamcast/setup.c +++ b/arch/sh/boards/mach-dreamcast/setup.c @@ -42,8 +42,6 @@ static void __init dreamcast_setup(char **cmdline_p) /* Acknowledge any previous events */ /* XXX */ - __set_io_port_base(0xa0000000); - /* Assign all virtual IRQs to the System ASIC int. handler */ for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) set_irq_chip_and_handler(i, &systemasic_int, diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 5f9881e1..3b1ceb4 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/usb/r8a66597.h> #include <linux/i2c.h> +#include <linux/i2c/tsc2007.h> #include <linux/input.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> @@ -38,6 +39,20 @@ * 0x1800_0000 MFI 16bit */ +/* SWITCH + *------------------------------ + * DS2[1] = FlashROM write protect ON : write protect + * OFF : No write protect + * DS2[2] = RMII / TS, SCIF ON : RMII + * OFF : TS, SCIF3 + * DS2[3] = Camera / Video ON : Camera + * OFF : NTSC/PAL (IN) + * DS2[5] = NTSC_OUT Clock ON : On board OSC + * OFF : SH7724 DV_CLK + * DS2[6-7] = MMC / SD ON-OFF : SD + * OFF-ON : MMC + */ + /* Heartbeat */ static unsigned char led_pos[] = { 0, 1, 2, 3 }; static struct heartbeat_data heartbeat_data = { @@ -70,7 +85,7 @@ static struct mtd_partition nor_flash_partitions[] = { .name = "boot loader", .offset = 0, .size = (5 * 1024 * 1024), - .mask_flags = MTD_CAP_ROM, + .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "free-area", .offset = MTDPART_OFS_APPEND, @@ -376,6 +391,43 @@ static struct platform_device keysc_device = { }, }; +/* TouchScreen */ +#define IRQ0 32 +static int ts_get_pendown_state(void) +{ + int val = 0; + gpio_free(GPIO_FN_INTC_IRQ0); + gpio_request(GPIO_PTZ0, NULL); + gpio_direction_input(GPIO_PTZ0); + + val = gpio_get_value(GPIO_PTZ0); + + gpio_free(GPIO_PTZ0); + gpio_request(GPIO_FN_INTC_IRQ0, NULL); + + return val ? 0 : 1; +} + +static int ts_init(void) +{ + gpio_request(GPIO_FN_INTC_IRQ0, NULL); + return 0; +} + +struct tsc2007_platform_data tsc2007_info = { + .model = 2007, + .x_plate_ohms = 180, + .get_pendown_state = ts_get_pendown_state, + .init_platform_hw = ts_init, +}; + +static struct i2c_board_info ts_i2c_clients = { + I2C_BOARD_INFO("tsc2007", 0x48), + .type = "tsc2007", + .platform_data = &tsc2007_info, + .irq = IRQ0, +}; + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, @@ -460,6 +512,11 @@ static void __init sh_eth_init(void) #define IODRIVEA 0xA405018A static int __init arch_setup(void) { + /* enable STATUS0, STATUS2 and PDSTATUS */ + gpio_request(GPIO_FN_STATUS0, NULL); + gpio_request(GPIO_FN_STATUS2, NULL); + gpio_request(GPIO_FN_PDSTATUS, NULL); + /* enable SCIFA0 */ gpio_request(GPIO_FN_SCIF0_TXD, NULL); gpio_request(GPIO_FN_SCIF0_RXD, NULL); @@ -590,6 +647,10 @@ static int __init arch_setup(void) */ gpio_request(GPIO_PTF4, NULL); gpio_direction_output(GPIO_PTF4, 1); + + /* enable TouchScreen */ + i2c_register_board_info(0, &ts_i2c_clients, 1); + set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW); } /* enable CEU0 */ diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 0151933..bb407ef 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -152,8 +152,6 @@ call_do_page_fault: mov.l 1f, r0 mov.l @r0, r6 - sti - mov.l 3f, r0 mov.l 4f, r1 mov r15, r4 diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c index 4ff5072..b8fa652 100644 --- a/arch/sh/kernel/io_generic.c +++ b/arch/sh/kernel/io_generic.c @@ -147,6 +147,9 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count) void __iomem *generic_ioport_map(unsigned long addr, unsigned int size) { + if (PXSEG(addr) >= P1SEG) + return (void __iomem *)addr; + return (void __iomem *)(addr + generic_io_base); } diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c index 548f660..cbce639 100644 --- a/arch/sh/kernel/machvec.c +++ b/arch/sh/kernel/machvec.c @@ -14,6 +14,7 @@ #include <linux/string.h> #include <asm/machvec.h> #include <asm/sections.h> +#include <asm/addrspace.h> #include <asm/setup.h> #include <asm/io.h> #include <asm/irq.h> @@ -133,4 +134,6 @@ void __init sh_mv_setup(void) if (!sh_mv.mv_nr_irqs) sh_mv.mv_nr_irqs = NR_IRQS; + + __set_io_port_base(P2SEG); } diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 8dbe26b..86c2704 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -84,6 +84,7 @@ DECLARE_EXPORT(__movstrSI60); DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); DECLARE_EXPORT(__movstrSI12_i4); +DECLARE_EXPORT(__movmem); DECLARE_EXPORT(__movmem_i4_even); DECLARE_EXPORT(__movmem_i4_odd); DECLARE_EXPORT(__movmemSI12_i4); diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index 69bb165..e0b5e4b 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -54,8 +54,8 @@ static unsigned long se_multi; /* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not valid! */ static int se_usermode = 3; -/* 0: no warning 1: print a warning message */ -static int se_kernmode_warn = 1; +/* 0: no warning 1: print a warning message, disabled by default */ +static int se_kernmode_warn; #ifdef CONFIG_PROC_FS static const char *se_usermode_action[] = { diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index b2453bb..a98c7d8 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -43,7 +43,7 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) = * Called from kernel/module.c:sys_init_module and routine for a.out format, * signal handler code and kprobes code */ -static void sh4_flush_icache_range(void *args) +static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) { struct flusher_data *data = args; unsigned long start, end; diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 2cadee2..2601935 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -78,7 +78,7 @@ static void sh7705_flush_icache_range(void *args) /* * Writeback&Invalidate the D-cache of the page */ -static void __flush_dcache_page(unsigned long phys) +static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys) { unsigned long ways, waysize, addrstart; unsigned long flags; @@ -144,7 +144,7 @@ static void sh7705_flush_dcache_page(void *arg) __flush_dcache_page(PHYSADDR(page_address(page))); } -static void sh7705_flush_cache_all(void *args) +static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args) { unsigned long flags; diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index c325061..a86eaa9 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -83,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, * * PMB entries are all pre-faulted. */ - if (unlikely(size >= 0x1000000)) { + if (unlikely(phys_addr >= P1SEG)) { unsigned long mapped = pmb_remap(addr, phys_addr, size, flags); if (likely(mapped)) { diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index b1a714a..aade3110 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -33,6 +33,8 @@ #define NR_PMB_ENTRIES 16 +static void __pmb_unmap(struct pmb_entry *); + static struct kmem_cache *pmb_cache; static unsigned long pmb_map; @@ -218,9 +220,10 @@ static struct { long pmb_remap(unsigned long vaddr, unsigned long phys, unsigned long size, unsigned long flags) { - struct pmb_entry *pmbp; + struct pmb_entry *pmbp, *pmbe; unsigned long wanted; int pmb_flags, i; + long err; /* Convert typical pgprot value to the PMB equivalent */ if (flags & _PAGE_CACHABLE) { @@ -236,20 +239,22 @@ long pmb_remap(unsigned long vaddr, unsigned long phys, again: for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) { - struct pmb_entry *pmbe; int ret; if (size < pmb_sizes[i].size) continue; pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag); - if (IS_ERR(pmbe)) - return PTR_ERR(pmbe); + if (IS_ERR(pmbe)) { + err = PTR_ERR(pmbe); + goto out; + } ret = set_pmb_entry(pmbe); if (ret != 0) { pmb_free(pmbe); - return -EBUSY; + err = -EBUSY; + goto out; } phys += pmb_sizes[i].size; @@ -264,12 +269,25 @@ again: pmbp->link = pmbe; pmbp = pmbe; + + /* + * Instead of trying smaller sizes on every iteration + * (even if we succeed in allocating space), try using + * pmb_sizes[i].size again. + */ + i--; } if (size >= 0x1000000) goto again; return wanted - size; + +out: + if (pmbp) + __pmb_unmap(pmbp); + + return err; } void pmb_unmap(unsigned long addr) @@ -283,12 +301,19 @@ void pmb_unmap(unsigned long addr) if (unlikely(!pmbe)) return; + __pmb_unmap(pmbe); +} + +static void __pmb_unmap(struct pmb_entry *pmbe) +{ WARN_ON(!test_bit(pmbe->entry, &pmb_map)); do { struct pmb_entry *pmblink = pmbe; - clear_pmb_entry(pmbe); + if (pmbe->entry != PMB_NO_ENTRY) + clear_pmb_entry(pmbe); + pmbe = pmblink->link; pmb_free(pmblink); diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index ac45aab..05ef538 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -26,6 +26,7 @@ config SPARC select RTC_CLASS select RTC_DRV_M48T59 select HAVE_PERF_EVENTS + select PERF_USE_VMALLOC select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG @@ -48,6 +49,7 @@ config SPARC64 select RTC_DRV_SUN4V select RTC_DRV_STARFIRE select HAVE_PERF_EVENTS + select PERF_USE_VMALLOC config ARCH_DEFCONFIG string diff --git a/arch/sparc/include/asm/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h index 4f63ed8..1620076 100644 --- a/arch/sparc/include/asm/hardirq_32.h +++ b/arch/sparc/include/asm/hardirq_32.h @@ -7,17 +7,7 @@ #ifndef __SPARC_HARDIRQ_H #define __SPARC_HARDIRQ_H -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/cache.h> - -/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - #define HARDIRQ_BITS 8 +#include <asm-generic/hardirq.h> #endif /* __SPARC_HARDIRQ_H */ diff --git a/arch/sparc/include/asm/irq_32.h b/arch/sparc/include/asm/irq_32.h index ea43057..cbf4801 100644 --- a/arch/sparc/include/asm/irq_32.h +++ b/arch/sparc/include/asm/irq_32.h @@ -6,10 +6,10 @@ #ifndef _SPARC_IRQ_H #define _SPARC_IRQ_H -#include <linux/interrupt.h> - #define NR_IRQS 16 +#include <linux/interrupt.h> + #define irq_canonicalize(irq) (irq) extern void __init init_IRQ(void); diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index 0ff92fa..f3cb790 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -41,8 +41,8 @@ #define LOW_OBP_ADDRESS _AC(0x00000000f0000000,UL) #define HI_OBP_ADDRESS _AC(0x0000000100000000,UL) #define VMALLOC_START _AC(0x0000000100000000,UL) -#define VMALLOC_END _AC(0x0000000200000000,UL) -#define VMEMMAP_BASE _AC(0x0000000200000000,UL) +#define VMALLOC_END _AC(0x0000010000000000,UL) +#define VMEMMAP_BASE _AC(0x0000010000000000,UL) #define vmemmap ((struct page *)VMEMMAP_BASE) diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S index 3ea6e8c..1d36147 100644 --- a/arch/sparc/kernel/ktlb.S +++ b/arch/sparc/kernel/ktlb.S @@ -280,8 +280,8 @@ kvmap_dtlb_nonlinear: #ifdef CONFIG_SPARSEMEM_VMEMMAP /* Do not use the TSB for vmemmap. */ - mov (VMEMMAP_BASE >> 24), %g5 - sllx %g5, 24, %g5 + mov (VMEMMAP_BASE >> 40), %g5 + sllx %g5, 40, %g5 cmp %g4,%g5 bgeu,pn %xcc, kvmap_vmemmap nop @@ -293,8 +293,8 @@ kvmap_dtlb_tsbmiss: sethi %hi(MODULES_VADDR), %g5 cmp %g4, %g5 blu,pn %xcc, kvmap_dtlb_longpath - mov (VMALLOC_END >> 24), %g5 - sllx %g5, 24, %g5 + mov (VMALLOC_END >> 40), %g5 + sllx %g5, 40, %g5 cmp %g4, %g5 bgeu,pn %xcc, kvmap_dtlb_longpath nop diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 2d6a1b1..04db927 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -56,7 +56,8 @@ struct cpu_hw_events { struct perf_event *events[MAX_HWEVENTS]; unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)]; unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)]; - int enabled; + u64 pcr; + int enabled; }; DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, }; @@ -68,8 +69,30 @@ struct perf_event_map { #define PIC_LOWER 0x02 }; +static unsigned long perf_event_encode(const struct perf_event_map *pmap) +{ + return ((unsigned long) pmap->encoding << 16) | pmap->pic_mask; +} + +static void perf_event_decode(unsigned long val, u16 *enc, u8 *msk) +{ + *msk = val & 0xff; + *enc = val >> 16; +} + +#define C(x) PERF_COUNT_HW_CACHE_##x + +#define CACHE_OP_UNSUPPORTED 0xfffe +#define CACHE_OP_NONSENSE 0xffff + +typedef struct perf_event_map cache_map_t + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; + struct sparc_pmu { const struct perf_event_map *(*event_map)(int); + const cache_map_t *cache_map; int max_events; int upper_shift; int lower_shift; @@ -80,21 +103,109 @@ struct sparc_pmu { int lower_nop; }; -static const struct perf_event_map ultra3i_perfmon_event_map[] = { +static const struct perf_event_map ultra3_perfmon_event_map[] = { [PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER }, [PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER }, [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER }, [PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER }, }; -static const struct perf_event_map *ultra3i_event_map(int event_id) +static const struct perf_event_map *ultra3_event_map(int event_id) { - return &ultra3i_perfmon_event_map[event_id]; + return &ultra3_perfmon_event_map[event_id]; } -static const struct sparc_pmu ultra3i_pmu = { - .event_map = ultra3i_event_map, - .max_events = ARRAY_SIZE(ultra3i_perfmon_event_map), +static const cache_map_t ultra3_cache_map = { +[C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x09, PIC_LOWER, }, + [C(RESULT_MISS)] = { 0x09, PIC_UPPER, }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x0a, PIC_LOWER }, + [C(RESULT_MISS)] = { 0x0a, PIC_UPPER }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x09, PIC_LOWER, }, + [C(RESULT_MISS)] = { 0x09, PIC_UPPER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE }, + [ C(RESULT_MISS) ] = { CACHE_OP_NONSENSE }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x0c, PIC_LOWER, }, + [C(RESULT_MISS)] = { 0x0c, PIC_UPPER, }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x0c, PIC_LOWER }, + [C(RESULT_MISS)] = { 0x0c, PIC_UPPER }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x12, PIC_UPPER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x11, PIC_UPPER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +}; + +static const struct sparc_pmu ultra3_pmu = { + .event_map = ultra3_event_map, + .cache_map = &ultra3_cache_map, + .max_events = ARRAY_SIZE(ultra3_perfmon_event_map), .upper_shift = 11, .lower_shift = 4, .event_mask = 0x3f, @@ -102,6 +213,121 @@ static const struct sparc_pmu ultra3i_pmu = { .lower_nop = 0x14, }; +/* Niagara1 is very limited. The upper PIC is hard-locked to count + * only instructions, so it is free running which creates all kinds of + * problems. Some hardware designs make one wonder if the creator + * even looked at how this stuff gets used by software. + */ +static const struct perf_event_map niagara1_perfmon_event_map[] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, PIC_UPPER }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, PIC_UPPER }, + [PERF_COUNT_HW_CACHE_REFERENCES] = { 0, PIC_NONE }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x03, PIC_LOWER }, +}; + +static const struct perf_event_map *niagara1_event_map(int event_id) +{ + return &niagara1_perfmon_event_map[event_id]; +} + +static const cache_map_t niagara1_cache_map = { +[C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x03, PIC_LOWER, }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x03, PIC_LOWER, }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x00, PIC_UPPER }, + [C(RESULT_MISS)] = { 0x02, PIC_LOWER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE }, + [ C(RESULT_MISS) ] = { CACHE_OP_NONSENSE }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x07, PIC_LOWER, }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x07, PIC_LOWER, }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x05, PIC_LOWER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x04, PIC_LOWER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +}; + +static const struct sparc_pmu niagara1_pmu = { + .event_map = niagara1_event_map, + .cache_map = &niagara1_cache_map, + .max_events = ARRAY_SIZE(niagara1_perfmon_event_map), + .upper_shift = 0, + .lower_shift = 4, + .event_mask = 0x7, + .upper_nop = 0x0, + .lower_nop = 0x0, +}; + static const struct perf_event_map niagara2_perfmon_event_map[] = { [PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER }, [PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER }, @@ -116,8 +342,96 @@ static const struct perf_event_map *niagara2_event_map(int event_id) return &niagara2_perfmon_event_map[event_id]; } +static const cache_map_t niagara2_cache_map = { +[C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x0208, PIC_UPPER | PIC_LOWER, }, + [C(RESULT_MISS)] = { 0x0302, PIC_UPPER | PIC_LOWER, }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x0210, PIC_UPPER | PIC_LOWER, }, + [C(RESULT_MISS)] = { 0x0302, PIC_UPPER | PIC_LOWER, }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x02ff, PIC_UPPER | PIC_LOWER, }, + [C(RESULT_MISS)] = { 0x0301, PIC_UPPER | PIC_LOWER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE }, + [ C(RESULT_MISS) ] = { CACHE_OP_NONSENSE }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x0208, PIC_UPPER | PIC_LOWER, }, + [C(RESULT_MISS)] = { 0x0330, PIC_UPPER | PIC_LOWER, }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x0210, PIC_UPPER | PIC_LOWER, }, + [C(RESULT_MISS)] = { 0x0320, PIC_UPPER | PIC_LOWER, }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0x0b08, PIC_UPPER | PIC_LOWER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { 0xb04, PIC_UPPER | PIC_LOWER, }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +[C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED }, + [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED }, + [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED }, + }, +}, +}; + static const struct sparc_pmu niagara2_pmu = { .event_map = niagara2_event_map, + .cache_map = &niagara2_cache_map, .max_events = ARRAY_SIZE(niagara2_perfmon_event_map), .upper_shift = 19, .lower_shift = 6, @@ -151,23 +465,30 @@ static u64 nop_for_index(int idx) sparc_pmu->lower_nop, idx); } -static inline void sparc_pmu_enable_event(struct hw_perf_event *hwc, - int idx) +static inline void sparc_pmu_enable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx) { u64 val, mask = mask_for_index(idx); - val = pcr_ops->read(); - pcr_ops->write((val & ~mask) | hwc->config); + val = cpuc->pcr; + val &= ~mask; + val |= hwc->config; + cpuc->pcr = val; + + pcr_ops->write(cpuc->pcr); } -static inline void sparc_pmu_disable_event(struct hw_perf_event *hwc, - int idx) +static inline void sparc_pmu_disable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx) { u64 mask = mask_for_index(idx); u64 nop = nop_for_index(idx); - u64 val = pcr_ops->read(); + u64 val; - pcr_ops->write((val & ~mask) | nop); + val = cpuc->pcr; + val &= ~mask; + val |= nop; + cpuc->pcr = val; + + pcr_ops->write(cpuc->pcr); } void hw_perf_enable(void) @@ -182,7 +503,7 @@ void hw_perf_enable(void) cpuc->enabled = 1; barrier(); - val = pcr_ops->read(); + val = cpuc->pcr; for (i = 0; i < MAX_HWEVENTS; i++) { struct perf_event *cp = cpuc->events[i]; @@ -194,7 +515,9 @@ void hw_perf_enable(void) val |= hwc->config_base; } - pcr_ops->write(val); + cpuc->pcr = val; + + pcr_ops->write(cpuc->pcr); } void hw_perf_disable(void) @@ -207,10 +530,12 @@ void hw_perf_disable(void) cpuc->enabled = 0; - val = pcr_ops->read(); + val = cpuc->pcr; val &= ~(PCR_UTRACE | PCR_STRACE | sparc_pmu->hv_bit | sparc_pmu->irq_bit); - pcr_ops->write(val); + cpuc->pcr = val; + + pcr_ops->write(cpuc->pcr); } static u32 read_pmc(int idx) @@ -242,7 +567,7 @@ static void write_pmc(int idx, u64 val) } static int sparc_perf_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, int idx) + struct hw_perf_event *hwc, int idx) { s64 left = atomic64_read(&hwc->period_left); s64 period = hwc->sample_period; @@ -282,19 +607,19 @@ static int sparc_pmu_enable(struct perf_event *event) if (test_and_set_bit(idx, cpuc->used_mask)) return -EAGAIN; - sparc_pmu_disable_event(hwc, idx); + sparc_pmu_disable_event(cpuc, hwc, idx); cpuc->events[idx] = event; set_bit(idx, cpuc->active_mask); sparc_perf_event_set_period(event, hwc, idx); - sparc_pmu_enable_event(hwc, idx); + sparc_pmu_enable_event(cpuc, hwc, idx); perf_event_update_userpage(event); return 0; } static u64 sparc_perf_event_update(struct perf_event *event, - struct hw_perf_event *hwc, int idx) + struct hw_perf_event *hwc, int idx) { int shift = 64 - 32; u64 prev_raw_count, new_raw_count; @@ -324,7 +649,7 @@ static void sparc_pmu_disable(struct perf_event *event) int idx = hwc->idx; clear_bit(idx, cpuc->active_mask); - sparc_pmu_disable_event(hwc, idx); + sparc_pmu_disable_event(cpuc, hwc, idx); barrier(); @@ -338,18 +663,29 @@ static void sparc_pmu_disable(struct perf_event *event) static void sparc_pmu_read(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; + sparc_perf_event_update(event, hwc, hwc->idx); } static void sparc_pmu_unthrottle(struct perf_event *event) { + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; - sparc_pmu_enable_event(hwc, hwc->idx); + + sparc_pmu_enable_event(cpuc, hwc, hwc->idx); } static atomic_t active_events = ATOMIC_INIT(0); static DEFINE_MUTEX(pmc_grab_mutex); +static void perf_stop_nmi_watchdog(void *unused) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + + stop_nmi_watchdog(NULL); + cpuc->pcr = pcr_ops->read(); +} + void perf_event_grab_pmc(void) { if (atomic_inc_not_zero(&active_events)) @@ -358,7 +694,7 @@ void perf_event_grab_pmc(void) mutex_lock(&pmc_grab_mutex); if (atomic_read(&active_events) == 0) { if (atomic_read(&nmi_active) > 0) { - on_each_cpu(stop_nmi_watchdog, NULL, 1); + on_each_cpu(perf_stop_nmi_watchdog, NULL, 1); BUG_ON(atomic_read(&nmi_active) != 0); } atomic_inc(&active_events); @@ -375,30 +711,160 @@ void perf_event_release_pmc(void) } } +static const struct perf_event_map *sparc_map_cache_event(u64 config) +{ + unsigned int cache_type, cache_op, cache_result; + const struct perf_event_map *pmap; + + if (!sparc_pmu->cache_map) + return ERR_PTR(-ENOENT); + + cache_type = (config >> 0) & 0xff; + if (cache_type >= PERF_COUNT_HW_CACHE_MAX) + return ERR_PTR(-EINVAL); + + cache_op = (config >> 8) & 0xff; + if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) + return ERR_PTR(-EINVAL); + + cache_result = (config >> 16) & 0xff; + if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return ERR_PTR(-EINVAL); + + pmap = &((*sparc_pmu->cache_map)[cache_type][cache_op][cache_result]); + + if (pmap->encoding == CACHE_OP_UNSUPPORTED) + return ERR_PTR(-ENOENT); + + if (pmap->encoding == CACHE_OP_NONSENSE) + return ERR_PTR(-EINVAL); + + return pmap; +} + static void hw_perf_event_destroy(struct perf_event *event) { perf_event_release_pmc(); } +/* Make sure all events can be scheduled into the hardware at + * the same time. This is simplified by the fact that we only + * need to support 2 simultaneous HW events. + */ +static int sparc_check_constraints(unsigned long *events, int n_ev) +{ + if (n_ev <= perf_max_events) { + u8 msk1, msk2; + u16 dummy; + + if (n_ev == 1) + return 0; + BUG_ON(n_ev != 2); + perf_event_decode(events[0], &dummy, &msk1); + perf_event_decode(events[1], &dummy, &msk2); + + /* If both events can go on any counter, OK. */ + if (msk1 == (PIC_UPPER | PIC_LOWER) && + msk2 == (PIC_UPPER | PIC_LOWER)) + return 0; + + /* If one event is limited to a specific counter, + * and the other can go on both, OK. + */ + if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) && + msk2 == (PIC_UPPER | PIC_LOWER)) + return 0; + if ((msk2 == PIC_UPPER || msk2 == PIC_LOWER) && + msk1 == (PIC_UPPER | PIC_LOWER)) + return 0; + + /* If the events are fixed to different counters, OK. */ + if ((msk1 == PIC_UPPER && msk2 == PIC_LOWER) || + (msk1 == PIC_LOWER && msk2 == PIC_UPPER)) + return 0; + + /* Otherwise, there is a conflict. */ + } + + return -1; +} + +static int check_excludes(struct perf_event **evts, int n_prev, int n_new) +{ + int eu = 0, ek = 0, eh = 0; + struct perf_event *event; + int i, n, first; + + n = n_prev + n_new; + if (n <= 1) + return 0; + + first = 1; + for (i = 0; i < n; i++) { + event = evts[i]; + if (first) { + eu = event->attr.exclude_user; + ek = event->attr.exclude_kernel; + eh = event->attr.exclude_hv; + first = 0; + } else if (event->attr.exclude_user != eu || + event->attr.exclude_kernel != ek || + event->attr.exclude_hv != eh) { + return -EAGAIN; + } + } + + return 0; +} + +static int collect_events(struct perf_event *group, int max_count, + struct perf_event *evts[], unsigned long *events) +{ + struct perf_event *event; + int n = 0; + + if (!is_software_event(group)) { + if (n >= max_count) + return -1; + evts[n] = group; + events[n++] = group->hw.event_base; + } + list_for_each_entry(event, &group->sibling_list, group_entry) { + if (!is_software_event(event) && + event->state != PERF_EVENT_STATE_OFF) { + if (n >= max_count) + return -1; + evts[n] = event; + events[n++] = event->hw.event_base; + } + } + return n; +} + static int __hw_perf_event_init(struct perf_event *event) { struct perf_event_attr *attr = &event->attr; + struct perf_event *evts[MAX_HWEVENTS]; struct hw_perf_event *hwc = &event->hw; + unsigned long events[MAX_HWEVENTS]; const struct perf_event_map *pmap; u64 enc; + int n; if (atomic_read(&nmi_active) < 0) return -ENODEV; - if (attr->type != PERF_TYPE_HARDWARE) + if (attr->type == PERF_TYPE_HARDWARE) { + if (attr->config >= sparc_pmu->max_events) + return -EINVAL; + pmap = sparc_pmu->event_map(attr->config); + } else if (attr->type == PERF_TYPE_HW_CACHE) { + pmap = sparc_map_cache_event(attr->config); + if (IS_ERR(pmap)) + return PTR_ERR(pmap); + } else return -EOPNOTSUPP; - if (attr->config >= sparc_pmu->max_events) - return -EINVAL; - - perf_event_grab_pmc(); - event->destroy = hw_perf_event_destroy; - /* We save the enable bits in the config_base. So to * turn off sampling just write 'config', and to enable * things write 'config | config_base'. @@ -411,15 +877,39 @@ static int __hw_perf_event_init(struct perf_event *event) if (!attr->exclude_hv) hwc->config_base |= sparc_pmu->hv_bit; + hwc->event_base = perf_event_encode(pmap); + + enc = pmap->encoding; + + n = 0; + if (event->group_leader != event) { + n = collect_events(event->group_leader, + perf_max_events - 1, + evts, events); + if (n < 0) + return -EINVAL; + } + events[n] = hwc->event_base; + evts[n] = event; + + if (check_excludes(evts, n, 1)) + return -EINVAL; + + if (sparc_check_constraints(events, n + 1)) + return -EINVAL; + + /* Try to do all error checking before this point, as unwinding + * state after grabbing the PMC is difficult. + */ + perf_event_grab_pmc(); + event->destroy = hw_perf_event_destroy; + if (!hwc->sample_period) { hwc->sample_period = MAX_PERIOD; hwc->last_period = hwc->sample_period; atomic64_set(&hwc->period_left, hwc->sample_period); } - pmap = sparc_pmu->event_map(attr->config); - - enc = pmap->encoding; if (pmap->pic_mask & PIC_UPPER) { hwc->idx = PIC_UPPER_INDEX; enc <<= sparc_pmu->upper_shift; @@ -472,7 +962,7 @@ void perf_event_print_debug(void) } static int __kprobes perf_event_nmi_handler(struct notifier_block *self, - unsigned long cmd, void *__args) + unsigned long cmd, void *__args) { struct die_args *args = __args; struct perf_sample_data data; @@ -513,7 +1003,7 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self, continue; if (perf_event_overflow(event, 1, &data, regs)) - sparc_pmu_disable_event(hwc, idx); + sparc_pmu_disable_event(cpuc, hwc, idx); } return NOTIFY_STOP; @@ -525,8 +1015,15 @@ static __read_mostly struct notifier_block perf_event_nmi_notifier = { static bool __init supported_pmu(void) { - if (!strcmp(sparc_pmu_type, "ultra3i")) { - sparc_pmu = &ultra3i_pmu; + if (!strcmp(sparc_pmu_type, "ultra3") || + !strcmp(sparc_pmu_type, "ultra3+") || + !strcmp(sparc_pmu_type, "ultra3i") || + !strcmp(sparc_pmu_type, "ultra4+")) { + sparc_pmu = &ultra3_pmu; + return true; + } + if (!strcmp(sparc_pmu_type, "niagara")) { + sparc_pmu = &niagara1_pmu; return true; } if (!strcmp(sparc_pmu_type, "niagara2")) { diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c index f97cb8b..f9024bc 100644 --- a/arch/sparc/oprofile/init.c +++ b/arch/sparc/oprofile/init.c @@ -11,6 +11,7 @@ #include <linux/oprofile.h> #include <linux/errno.h> #include <linux/init.h> +#include <linux/param.h> /* for HZ */ #ifdef CONFIG_SPARC64 #include <linux/notifier.h> diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 14a102e..cf8a97f 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -5,6 +5,7 @@ #include "linux/irqreturn.h" #include "linux/kd.h" +#include "linux/sched.h" #include "chan_kern.h" #include "irq_kern.h" #include "irq_user.h" diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c index 1993008..4ebc8a3 100644 --- a/arch/um/drivers/port_kern.c +++ b/arch/um/drivers/port_kern.c @@ -7,6 +7,7 @@ #include "linux/interrupt.h" #include "linux/list.h" #include "linux/mutex.h" +#include "linux/workqueue.h" #include "asm/atomic.h" #include "init.h" #include "irq_kern.h" diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 454cdb4..039270b 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -10,6 +10,7 @@ #include "linux/interrupt.h" #include "linux/kernel_stat.h" #include "linux/module.h" +#include "linux/sched.h" #include "linux/seq_file.h" #include "as-layout.h" #include "kern_util.h" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 8da9374..c876bac 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -86,10 +86,6 @@ config STACKTRACE_SUPPORT config HAVE_LATENCYTOP_SUPPORT def_bool y -config FAST_CMPXCHG_LOCAL - bool - default y - config MMU def_bool y diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 527519b..f2824fb 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -400,7 +400,7 @@ config X86_TSC config X86_CMPXCHG64 def_bool y - depends on X86_PAE || X86_64 + depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM # this should be set for all -march=.. options where the compiler # generates cmov. @@ -412,6 +412,7 @@ config X86_MINIMUM_CPU_FAMILY int default "64" if X86_64 default "6" if X86_32 && X86_P6_NOP + default "5" if X86_32 && X86_CMPXCHG64 default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK) default "3" diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 74619c4..1733f9f 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -21,8 +21,8 @@ #define __AUDIT_ARCH_LE 0x40000000 #ifndef CONFIG_AUDITSYSCALL -#define sysexit_audit int_ret_from_sys_call -#define sysretl_audit int_ret_from_sys_call +#define sysexit_audit ia32_ret_from_sys_call +#define sysretl_audit ia32_ret_from_sys_call #endif #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8) @@ -39,12 +39,12 @@ .endm /* clobbers %eax */ - .macro CLEAR_RREGS _r9=rax + .macro CLEAR_RREGS offset=0, _r9=rax xorl %eax,%eax - movq %rax,R11(%rsp) - movq %rax,R10(%rsp) - movq %\_r9,R9(%rsp) - movq %rax,R8(%rsp) + movq %rax,\offset+R11(%rsp) + movq %rax,\offset+R10(%rsp) + movq %\_r9,\offset+R9(%rsp) + movq %rax,\offset+R8(%rsp) .endm /* @@ -172,6 +172,10 @@ sysexit_from_sys_call: movl RIP-R11(%rsp),%edx /* User %eip */ CFI_REGISTER rip,rdx RESTORE_ARGS 1,24,1,1,1,1 + xorq %r8,%r8 + xorq %r9,%r9 + xorq %r10,%r10 + xorq %r11,%r11 popfq CFI_ADJUST_CFA_OFFSET -8 /*CFI_RESTORE rflags*/ @@ -202,7 +206,7 @@ sysexit_from_sys_call: .macro auditsys_exit exit,ebpsave=RBP testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) - jnz int_ret_from_sys_call + jnz ia32_ret_from_sys_call TRACE_IRQS_ON sti movl %eax,%esi /* second arg, syscall return value */ @@ -218,8 +222,9 @@ sysexit_from_sys_call: cli TRACE_IRQS_OFF testl %edi,TI_flags(%r10) - jnz int_with_check - jmp \exit + jz \exit + CLEAR_RREGS -ARGOFFSET + jmp int_with_check .endm sysenter_auditsys: @@ -329,6 +334,9 @@ sysretl_from_sys_call: CFI_REGISTER rip,rcx movl EFLAGS-ARGOFFSET(%rsp),%r11d /*CFI_REGISTER rflags,r11*/ + xorq %r10,%r10 + xorq %r9,%r9 + xorq %r8,%r8 TRACE_IRQS_ON movl RSP-ARGOFFSET(%rsp),%esp CFI_RESTORE rsp @@ -353,7 +361,7 @@ cstar_tracesys: #endif xchgl %r9d,%ebp SAVE_REST - CLEAR_RREGS r9 + CLEAR_RREGS 0, r9 movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter @@ -425,6 +433,8 @@ ia32_do_call: call *ia32_sys_call_table(,%rax,8) # xxx: rip relative ia32_sysret: movq %rax,RAX-ARGOFFSET(%rsp) +ia32_ret_from_sys_call: + CLEAR_RREGS -ARGOFFSET jmp int_ret_from_sys_call ia32_tracesys: @@ -442,8 +452,8 @@ END(ia32_syscall) ia32_badsys: movq $0,ORIG_RAX-ARGOFFSET(%rsp) - movq $-ENOSYS,RAX-ARGOFFSET(%rsp) - jmp int_ret_from_sys_call + movq $-ENOSYS,%rax + jmp ia32_sysret quiet_ni_syscall: movq $-ENOSYS,%rax diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 3be0004..d838922 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -796,6 +796,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void); #define KVM_ARCH_WANT_MMU_NOTIFIER int kvm_unmap_hva(struct kvm *kvm, unsigned long hva); int kvm_age_hva(struct kvm *kvm, unsigned long hva); +void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); int cpuid_maxphyaddr(struct kvm_vcpu *vcpu); int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu); int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu); diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index b608a64..f1363b7 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -133,6 +133,8 @@ static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {} static inline void enable_p5_mce(void) {} #endif +extern void (*x86_mce_decode_callback)(struct mce *m); + void mce_setup(struct mce *m); void mce_log(struct mce *m); DECLARE_PER_CPU(struct sys_device, mce_dev); diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 183c345..b1598a9 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -85,6 +85,18 @@ static DECLARE_WAIT_QUEUE_HEAD(mce_wait); static DEFINE_PER_CPU(struct mce, mces_seen); static int cpu_missing; +static void default_decode_mce(struct mce *m) +{ + pr_emerg("No human readable MCE decoding support on this CPU type.\n"); + pr_emerg("Run the message through 'mcelog --ascii' to decode.\n"); +} + +/* + * CPU/chipset specific EDAC code can register a callback here to print + * MCE errors in a human-readable form: + */ +void (*x86_mce_decode_callback)(struct mce *m) = default_decode_mce; +EXPORT_SYMBOL(x86_mce_decode_callback); /* MCA banks polled by the period polling timer for corrected events */ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { @@ -165,46 +177,46 @@ void mce_log(struct mce *mce) set_bit(0, &mce_need_notify); } -void __weak decode_mce(struct mce *m) -{ - return; -} - static void print_mce(struct mce *m) { - printk(KERN_EMERG - "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n", + pr_emerg("CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n", m->extcpu, m->mcgstatus, m->bank, m->status); + if (m->ip) { - printk(KERN_EMERG "RIP%s %02x:<%016Lx> ", - !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "", - m->cs, m->ip); + pr_emerg("RIP%s %02x:<%016Lx> ", + !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "", + m->cs, m->ip); + if (m->cs == __KERNEL_CS) print_symbol("{%s}", m->ip); - printk(KERN_CONT "\n"); + pr_cont("\n"); } - printk(KERN_EMERG "TSC %llx ", m->tsc); + + pr_emerg("TSC %llx ", m->tsc); if (m->addr) - printk(KERN_CONT "ADDR %llx ", m->addr); + pr_cont("ADDR %llx ", m->addr); if (m->misc) - printk(KERN_CONT "MISC %llx ", m->misc); - printk(KERN_CONT "\n"); - printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", - m->cpuvendor, m->cpuid, m->time, m->socketid, - m->apicid); + pr_cont("MISC %llx ", m->misc); + + pr_cont("\n"); + pr_emerg("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", + m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid); - decode_mce(m); + /* + * Print out human-readable details about the MCE error, + * (if the CPU has an implementation for that): + */ + x86_mce_decode_callback(m); } static void print_mce_head(void) { - printk(KERN_EMERG "\nHARDWARE ERROR\n"); + pr_emerg("\nHARDWARE ERROR\n"); } static void print_mce_tail(void) { - printk(KERN_EMERG "This is not a software problem!\n" - "Run through mcelog --ascii to decode and contact your hardware vendor\n"); + pr_emerg("This is not a software problem!\n"); } #define PANIC_TIMEOUT 5 /* 5 seconds */ @@ -218,6 +230,7 @@ static atomic_t mce_fake_paniced; static void wait_for_panic(void) { long timeout = PANIC_TIMEOUT*USEC_PER_SEC; + preempt_disable(); local_irq_enable(); while (timeout-- > 0) @@ -285,6 +298,7 @@ static void mce_panic(char *msg, struct mce *final, char *exp) static int msr_to_offset(u32 msr) { unsigned bank = __get_cpu_var(injectm.bank); + if (msr == rip_msr) return offsetof(struct mce, ip); if (msr == MSR_IA32_MCx_STATUS(bank)) diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index 889f665..7c78563 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/percpu.h> +#include <linux/sched.h> #include <asm/apic.h> #include <asm/processor.h> #include <asm/msr.h> diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c index f04e725..3c1b12d 100644 --- a/arch/x86/kernel/cpu/mtrr/if.c +++ b/arch/x86/kernel/cpu/mtrr/if.c @@ -96,17 +96,24 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos) unsigned long long base, size; char *ptr; char line[LINE_SIZE]; + int length; size_t linelen; if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (!len) - return -EINVAL; memset(line, 0, LINE_SIZE); - if (len > LINE_SIZE) - len = LINE_SIZE; - if (copy_from_user(line, buf, len - 1)) + + length = len; + length--; + + if (length > LINE_SIZE - 1) + length = LINE_SIZE - 1; + + if (length < 0) + return -EINVAL; + + if (copy_from_user(line, buf, length)) return -EFAULT; linelen = strlen(line); diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 85419bb..d17d482 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1378,8 +1378,8 @@ static unsigned long ram_alignment(resource_size_t pos) if (mb < 16) return 1024*1024; - /* To 32MB for anything above that */ - return 32*1024*1024; + /* To 64MB for anything above that */ + return 64*1024*1024; } #define MAX_RESOURCE_SIZE ((resource_size_t)-1) diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 41fd965..b9c830c 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -206,8 +206,11 @@ static int __init setup_early_printk(char *buf) while (*buf != '\0') { if (!strncmp(buf, "serial", 6)) { - early_serial_init(buf + 6); + buf += 6; + early_serial_init(buf); early_console_register(&early_serial_console, keep); + if (!strncmp(buf, ",ttyS", 5)) + buf += 5; } if (!strncmp(buf, "ttyS", 4)) { early_serial_init(buf + 4); diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c index 1736c5a..9c3bd4a 100644 --- a/arch/x86/kernel/i386_ksyms_32.c +++ b/arch/x86/kernel/i386_ksyms_32.c @@ -15,8 +15,10 @@ EXPORT_SYMBOL(mcount); * the export, but dont use it from C code, it is used * by assembly code and is not using C calling convention! */ +#ifndef CONFIG_X86_CMPXCHG64 extern void cmpxchg8b_emu(void); EXPORT_SYMBOL(cmpxchg8b_emu); +#endif /* Networking helper routines. */ EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 74656d1..3912061 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -244,6 +244,7 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs) __func__, smp_processor_id(), vector, irq); } + run_local_timers(); irq_exit(); set_irq_regs(old_regs); @@ -268,6 +269,7 @@ void smp_generic_interrupt(struct pt_regs *regs) if (generic_interrupt_extension) generic_interrupt_extension(); + run_local_timers(); irq_exit(); set_irq_regs(old_regs); diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 64b838e..b2a71dc 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -35,7 +35,7 @@ int iommu_detected __read_mostly = 0; /* * This variable becomes 1 if iommu=pt is passed on the kernel command line. - * If this variable is 1, IOMMU implementations do no DMA ranslation for + * If this variable is 1, IOMMU implementations do no DMA translation for * devices and allow every device to access to whole physical memory. This is * useful if a user want to use an IOMMU only for KVM device assignment to * guests and not for driver dma translation. @@ -311,7 +311,7 @@ void pci_iommu_shutdown(void) amd_iommu_shutdown(); } /* Must execute after PCI subsystem */ -fs_initcall(pci_iommu_init); +rootfs_initcall(pci_iommu_init); #ifdef CONFIG_PCI /* Many VIA bridges seem to corrupt data for DAC. Disable it here */ diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 98a827e..a7f1b64 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -16,6 +16,7 @@ #include <linux/agp_backend.h> #include <linux/init.h> #include <linux/mm.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/spinlock.h> #include <linux/pci.h> diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 27349f9..a1a3cdd 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -4,6 +4,7 @@ #include <linux/pm.h> #include <linux/efi.h> #include <linux/dmi.h> +#include <linux/sched.h> #include <linux/tboot.h> #include <acpi/reboot.h> #include <asm/io.h> diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c index ec1de97..d915d95 100644 --- a/arch/x86/kernel/smp.c +++ b/arch/x86/kernel/smp.c @@ -198,6 +198,7 @@ void smp_reschedule_interrupt(struct pt_regs *regs) { ack_APIC_irq(); inc_irq_stat(irq_resched_count); + run_local_timers(); /* * KVM uses this interrupt to force a cpu out of guest mode */ diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 1ae5ceb..7024224 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -664,7 +664,7 @@ static void start_apic_timer(struct kvm_lapic *apic) { ktime_t now = apic->lapic_timer.timer.base->get_time(); - apic->lapic_timer.period = apic_get_reg(apic, APIC_TMICT) * + apic->lapic_timer.period = (u64)apic_get_reg(apic, APIC_TMICT) * APIC_BUS_CYCLE_NS * apic->divide_count; atomic_set(&apic->lapic_timer.pending, 0); diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index eca41ae..685a4ff 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -156,6 +156,8 @@ module_param(oos_shadow, bool, 0644); #define CREATE_TRACE_POINTS #include "mmutrace.h" +#define SPTE_HOST_WRITEABLE (1ULL << PT_FIRST_AVAIL_BITS_SHIFT) + #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level) struct kvm_rmap_desc { @@ -634,9 +636,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte) if (*spte & shadow_accessed_mask) kvm_set_pfn_accessed(pfn); if (is_writeble_pte(*spte)) - kvm_release_pfn_dirty(pfn); - else - kvm_release_pfn_clean(pfn); + kvm_set_pfn_dirty(pfn); rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level); if (!*rmapp) { printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte); @@ -748,7 +748,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn) return write_protected; } -static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp) +static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp, u64 data) { u64 *spte; int need_tlb_flush = 0; @@ -763,8 +763,45 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp) return need_tlb_flush; } -static int kvm_handle_hva(struct kvm *kvm, unsigned long hva, - int (*handler)(struct kvm *kvm, unsigned long *rmapp)) +static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp, u64 data) +{ + int need_flush = 0; + u64 *spte, new_spte; + pte_t *ptep = (pte_t *)data; + pfn_t new_pfn; + + WARN_ON(pte_huge(*ptep)); + new_pfn = pte_pfn(*ptep); + spte = rmap_next(kvm, rmapp, NULL); + while (spte) { + BUG_ON(!is_shadow_present_pte(*spte)); + rmap_printk("kvm_set_pte_rmapp: spte %p %llx\n", spte, *spte); + need_flush = 1; + if (pte_write(*ptep)) { + rmap_remove(kvm, spte); + __set_spte(spte, shadow_trap_nonpresent_pte); + spte = rmap_next(kvm, rmapp, NULL); + } else { + new_spte = *spte &~ (PT64_BASE_ADDR_MASK); + new_spte |= (u64)new_pfn << PAGE_SHIFT; + + new_spte &= ~PT_WRITABLE_MASK; + new_spte &= ~SPTE_HOST_WRITEABLE; + if (is_writeble_pte(*spte)) + kvm_set_pfn_dirty(spte_to_pfn(*spte)); + __set_spte(spte, new_spte); + spte = rmap_next(kvm, rmapp, spte); + } + } + if (need_flush) + kvm_flush_remote_tlbs(kvm); + + return 0; +} + +static int kvm_handle_hva(struct kvm *kvm, unsigned long hva, u64 data, + int (*handler)(struct kvm *kvm, unsigned long *rmapp, + u64 data)) { int i, j; int retval = 0; @@ -786,13 +823,15 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva, if (hva >= start && hva < end) { gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT; - retval |= handler(kvm, &memslot->rmap[gfn_offset]); + retval |= handler(kvm, &memslot->rmap[gfn_offset], + data); for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) { int idx = gfn_offset; idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j); retval |= handler(kvm, - &memslot->lpage_info[j][idx].rmap_pde); + &memslot->lpage_info[j][idx].rmap_pde, + data); } } } @@ -802,10 +841,15 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva, int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) { - return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp); + return kvm_handle_hva(kvm, hva, 0, kvm_unmap_rmapp); } -static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp) +void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte) +{ + kvm_handle_hva(kvm, hva, (u64)&pte, kvm_set_pte_rmapp); +} + +static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp, u64 data) { u64 *spte; int young = 0; @@ -841,13 +885,13 @@ static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn) gfn = unalias_gfn(vcpu->kvm, gfn); rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level); - kvm_unmap_rmapp(vcpu->kvm, rmapp); + kvm_unmap_rmapp(vcpu->kvm, rmapp, 0); kvm_flush_remote_tlbs(vcpu->kvm); } int kvm_age_hva(struct kvm *kvm, unsigned long hva) { - return kvm_handle_hva(kvm, hva, kvm_age_rmapp); + return kvm_handle_hva(kvm, hva, 0, kvm_age_rmapp); } #ifdef MMU_DEBUG @@ -1756,7 +1800,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep, unsigned pte_access, int user_fault, int write_fault, int dirty, int level, gfn_t gfn, pfn_t pfn, bool speculative, - bool can_unsync) + bool can_unsync, bool reset_host_protection) { u64 spte; int ret = 0; @@ -1783,6 +1827,9 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep, spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn, kvm_is_mmio_pfn(pfn)); + if (reset_host_protection) + spte |= SPTE_HOST_WRITEABLE; + spte |= (u64)pfn << PAGE_SHIFT; if ((pte_access & ACC_WRITE_MASK) @@ -1828,7 +1875,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, unsigned pt_access, unsigned pte_access, int user_fault, int write_fault, int dirty, int *ptwrite, int level, gfn_t gfn, - pfn_t pfn, bool speculative) + pfn_t pfn, bool speculative, + bool reset_host_protection) { int was_rmapped = 0; int was_writeble = is_writeble_pte(*sptep); @@ -1860,7 +1908,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, } if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault, - dirty, level, gfn, pfn, speculative, true)) { + dirty, level, gfn, pfn, speculative, true, + reset_host_protection)) { if (write_fault) *ptwrite = 1; kvm_x86_ops->tlb_flush(vcpu); @@ -1877,8 +1926,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, page_header_update_slot(vcpu->kvm, sptep, gfn); if (!was_rmapped) { rmap_count = rmap_add(vcpu, sptep, gfn); - if (!is_rmap_spte(*sptep)) - kvm_release_pfn_clean(pfn); + kvm_release_pfn_clean(pfn); if (rmap_count > RMAP_RECYCLE_THRESHOLD) rmap_recycle(vcpu, sptep, gfn); } else { @@ -1909,7 +1957,7 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write, if (iterator.level == level) { mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL, 0, write, 1, &pt_write, - level, gfn, pfn, false); + level, gfn, pfn, false, true); ++vcpu->stat.pf_fixed; break; } diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index d2fec9c..72558f8 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -273,9 +273,13 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page, if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq)) return; kvm_get_pfn(pfn); + /* + * we call mmu_set_spte() with reset_host_protection = true beacuse that + * vcpu->arch.update_pte.pfn was fetched from get_user_pages(write = 1). + */ mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0, gpte & PT_DIRTY_MASK, NULL, PT_PAGE_TABLE_LEVEL, - gpte_to_gfn(gpte), pfn, true); + gpte_to_gfn(gpte), pfn, true, true); } /* @@ -308,7 +312,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr, user_fault, write_fault, gw->ptes[gw->level-1] & PT_DIRTY_MASK, ptwrite, level, - gw->gfn, pfn, false); + gw->gfn, pfn, false, true); break; } @@ -558,6 +562,7 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu, static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) { int i, offset, nr_present; + bool reset_host_protection; offset = nr_present = 0; @@ -595,9 +600,16 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) nr_present++; pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte); + if (!(sp->spt[i] & SPTE_HOST_WRITEABLE)) { + pte_access &= ~ACC_WRITE_MASK; + reset_host_protection = 0; + } else { + reset_host_protection = 1; + } set_spte(vcpu, &sp->spt[i], pte_access, 0, 0, is_dirty_gpte(gpte), PT_PAGE_TABLE_LEVEL, gfn, - spte_to_pfn(sp->spt[i]), true, false); + spte_to_pfn(sp->spt[i]), true, false, + reset_host_protection); } return !nr_present; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 944cc9c..c17404a 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -767,6 +767,8 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu) rdtscll(tsc_this); delta = vcpu->arch.host_tsc - tsc_this; svm->vmcb->control.tsc_offset += delta; + if (is_nested(svm)) + svm->nested.hsave->control.tsc_offset += delta; vcpu->cpu = cpu; kvm_migrate_timers(vcpu); svm->asid_generation = 0; @@ -2057,10 +2059,14 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data) switch (ecx) { case MSR_IA32_TSC: { - u64 tsc; + u64 tsc_offset; + + if (is_nested(svm)) + tsc_offset = svm->nested.hsave->control.tsc_offset; + else + tsc_offset = svm->vmcb->control.tsc_offset; - rdtscll(tsc); - *data = svm->vmcb->control.tsc_offset + tsc; + *data = tsc_offset + native_read_tsc(); break; } case MSR_K6_STAR: @@ -2146,10 +2152,17 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data) switch (ecx) { case MSR_IA32_TSC: { - u64 tsc; + u64 tsc_offset = data - native_read_tsc(); + u64 g_tsc_offset = 0; + + if (is_nested(svm)) { + g_tsc_offset = svm->vmcb->control.tsc_offset - + svm->nested.hsave->control.tsc_offset; + svm->nested.hsave->control.tsc_offset = tsc_offset; + } + + svm->vmcb->control.tsc_offset = tsc_offset + g_tsc_offset; - rdtscll(tsc); - svm->vmcb->control.tsc_offset = data - tsc; break; } case MSR_K6_STAR: diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index f381201..ed53b42 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -709,7 +709,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu) if (vcpu->cpu != cpu) { vcpu_clear(vmx); kvm_migrate_timers(vcpu); - vpid_sync_vcpu_all(vmx); + set_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests); local_irq_disable(); list_add(&vmx->local_vcpus_link, &per_cpu(vcpus_on_cpu, cpu)); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index be451ee44..9b96953 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1591,6 +1591,8 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid, if (cpuid->nent < 1) goto out; + if (cpuid->nent > KVM_MAX_CPUID_ENTRIES) + cpuid->nent = KVM_MAX_CPUID_ENTRIES; r = -ENOMEM; cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry2) * cpuid->nent); if (!cpuid_entries) diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 3e549b8..85f5db9 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -15,8 +15,10 @@ ifeq ($(CONFIG_X86_32),y) obj-y += atomic64_32.o lib-y += checksum_32.o lib-y += strstr_32.o - lib-y += semaphore_32.o string_32.o cmpxchg8b_emu.o - + lib-y += semaphore_32.o string_32.o +ifneq ($(CONFIG_X86_CMPXCHG64),y) + lib-y += cmpxchg8b_emu.o +endif lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o else obj-y += io_64.o iomap_copy_64.o diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 19085ff..19f7df3 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -13,6 +13,7 @@ */ #include <linux/errno.h> +#include <linux/sched.h> #include <linux/time.h> #include <linux/clocksource.h> #include <linux/interrupt.h> |