diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-mx3/Kconfig | 8 | ||||
-rw-r--r-- | arch/arm/mach-mx3/devices-imx31.h | 7 | ||||
-rw-r--r-- | arch/arm/mach-mx3/devices-imx35.h | 7 | ||||
-rw-r--r-- | arch/arm/mach-mx3/devices.c | 89 | ||||
-rw-r--r-- | arch/arm/mach-mx3/devices.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mach-armadillo5x0.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mach-cpuimx35.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mach-mx31lilly.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mach-mx31lite.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mach-mx31moboard.c | 11 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mach-mx35_3ds.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mach-pcm037.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mach-pcm043.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mx31moboard-devboard.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mx31moboard-marxbot.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-mx3/mx31moboard-smartbot.c | 11 | ||||
-rw-r--r-- | arch/arm/plat-mxc/devices/platform-mxc-ehci.c | 16 |
17 files changed, 92 insertions, 135 deletions
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 120add4..1573483 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -53,6 +53,7 @@ config MACH_PCM037 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 @@ -75,6 +76,7 @@ config MACH_MX31LITE select SOC_IMX31 select MXC_ULPI if USB_ULPI select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX @@ -109,6 +111,7 @@ config MACH_MX31MOBOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI @@ -120,6 +123,7 @@ config MACH_MX31LILLY bool "Support MX31 LILLY-1131 platforms (INCO startec)" select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI @@ -142,6 +146,7 @@ config MACH_PCM043 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_ESDHC @@ -155,6 +160,7 @@ config MACH_ARMADILLO5X0 select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI @@ -169,6 +175,7 @@ config MACH_MX35_3DS select IMX_HAVE_PLATFORM_ESDHC select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND help Include support for MX35PDK platform. This includes specific @@ -188,6 +195,7 @@ config MACH_EUKREA_CPUIMX35 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_ESDHC diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h index 0cefaca..6571dd79 100644 --- a/arch/arm/mach-mx3/devices-imx31.h +++ b/arch/arm/mach-mx3/devices-imx31.h @@ -33,6 +33,13 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst; #define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) #define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) +extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst; +#define imx31_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst; +#define imx31_add_mxc_ehci_hs(id, pdata) \ + imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata) + extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst; #define imx31_add_mxc_mmc(id, pdata) \ imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h index 36561cc..849c48a 100644 --- a/arch/arm/mach-mx3/devices-imx35.h +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -41,6 +41,13 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst; #define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) #define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) +extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst; +#define imx35_add_mxc_ehci_otg(pdata) \ + imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata) +extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst; +#define imx35_add_mxc_ehci_hs(pdata) \ + imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata) + extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst; #define imx35_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 3f859ae..c122c0f 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -95,87 +95,6 @@ struct platform_device mx3_camera = { }, }; -static struct resource otg_resources[] = { - { - .start = MX31_USB_OTG_BASE_ADDR, - .end = MX31_USB_OTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_USB_OTG, - .end = MX31_INT_USB_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 otg_dmamask = DMA_BIT_MASK(32); - -/* OTG host */ -struct platform_device mxc_otg_host = { - .name = "mxc-ehci", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &otg_dmamask, - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* USB host 1 */ - -static u64 usbh1_dmamask = ~(u32)0; - -static struct resource mxc_usbh1_resources[] = { - { - .start = MX31_USB_HS1_BASE_ADDR, - .end = MX31_USB_HS1_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_USB_HS1, - .end = MX31_INT_USB_HS1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh1 = { - .name = "mxc-ehci", - .id = 1, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh1_dmamask, - }, - .resource = mxc_usbh1_resources, - .num_resources = ARRAY_SIZE(mxc_usbh1_resources), -}; - -#ifdef CONFIG_ARCH_MX31 -/* USB host 2 */ -static u64 usbh2_dmamask = ~(u32)0; - -static struct resource mxc_usbh2_resources[] = { - { - .start = MX31_USB_HS2_BASE_ADDR, - .end = MX31_USB_HS2_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_USB_HS2, - .end = MX31_INT_USB_HS2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh2 = { - .name = "mxc-ehci", - .id = 2, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh2_dmamask, - }, - .resource = mxc_usbh2_resources, - .num_resources = ARRAY_SIZE(mxc_usbh2_resources), -}; -#endif - static struct resource imx_wdt_resources[] = { { .flags = IORESOURCE_MEM, @@ -237,14 +156,6 @@ static int __init mx3_devices_init(void) #endif #if defined(CONFIG_ARCH_MX35) if (cpu_is_mx35()) { - otg_resources[0].start = MX35_USB_OTG_BASE_ADDR; - otg_resources[0].end = MX35_USB_OTG_BASE_ADDR + 0x1ff; - otg_resources[1].start = MX35_INT_USB_OTG; - otg_resources[1].end = MX35_INT_USB_OTG; - mxc_usbh1_resources[0].start = MX35_USB_HS_BASE_ADDR; - mxc_usbh1_resources[0].end = MX35_USB_HS_BASE_ADDR + 0x1ff; - mxc_usbh1_resources[1].start = MX35_INT_USB_HS; - mxc_usbh1_resources[1].end = MX35_INT_USB_HS; imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index eb3b990..1bc2918 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -1,9 +1,6 @@ extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; extern struct platform_device mx3_camera; -extern struct platform_device mxc_otg_host; -extern struct platform_device mxc_usbh1; -extern struct platform_device mxc_usbh2; extern struct platform_device imx_wdt_device0; extern struct platform_device imx_rtc_device0; extern struct platform_device imx_kpp_device; diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index e48072c..28b6f41 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -51,7 +51,6 @@ #include <mach/iomux-mx3.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -244,13 +243,13 @@ h2_free_cs: return err; } -static struct mxc_usbh_platform_data usbotg_pdata = { +static struct mxc_usbh_platform_data usbotg_pdata __initdata = { .init = usbotg_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, @@ -554,8 +553,8 @@ static void __init armadillo5x0_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_otg_host, &usbotg_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx31_add_mxc_ehci_otg(&usbotg_pdata); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); #endif } diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index b8b619a..0af1e84 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -42,7 +42,6 @@ #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/mxc_nand.h> -#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" @@ -116,12 +115,12 @@ static const struct mxc_nand_platform_data .flash_bbt = 1, }; -static struct mxc_usbh_platform_data __maybe_unused otg_pdata = { +static const struct mxc_usbh_platform_data otg_pdata __initconst = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = { +static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, @@ -167,11 +166,11 @@ static void __init mxc_board_init(void) imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); if (otg_mode_host) - mxc_register_device(&mxc_otg_host, &otg_pdata); + imx35_add_mxc_ehci_otg(&otg_pdata); else imx35_add_fsl_usb2_udc(&otg_device_pdata); - mxc_register_device(&mxc_usbh1, &usbh1_pdata); + imx35_add_mxc_ehci_hs(&usbh1_pdata); #ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD eukrea_mbimxsd35_baseboard_init(); diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 42f47fa..2c59548 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -42,7 +42,6 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -230,13 +229,13 @@ static struct mxc_usbh_platform_data usbotg_pdata = { .flags = MXC_EHCI_POWER_PINS_ENABLED, }; -static struct mxc_usbh_platform_data usbh1_pdata = { +static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .init = usbh1_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, @@ -249,8 +248,8 @@ static void lilly1131_usb_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_usbh1, &usbh1_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); } #else diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index b938958..9e64c66 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -40,7 +40,6 @@ #include <mach/board-mx31lite.h> #include <mach/iomux-mx3.h> #include <mach/irqs.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -171,7 +170,7 @@ static int usbh2_init(struct platform_device *pdev) return 0; } -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, @@ -258,7 +257,7 @@ static void __init mxc_board_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); #endif /* SMSC9117 IRQ pin */ diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 5e2ee85..203d21a 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -40,7 +40,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> -#include <mach/mxc_ehci.h> #include <mach/mx3_camera.h> #include <mach/spi.h> #include <mach/ulpi.h> @@ -403,17 +402,23 @@ static void usb_xcvr_reset(void) #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init moboard_usbh2_init(void) { + struct platform_device *pdev; + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - return mxc_register_device(&mxc_usbh2, &usbh2_pdata); + pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; } #else static inline int moboard_usbh2_init(void) { return 0; } diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index 6dfdf17..73fb115 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -39,7 +39,6 @@ #include <mach/iomux-mx35.h> #include <mach/irqs.h> #include <mach/3ds_debugboard.h> -#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" @@ -127,7 +126,7 @@ static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { }; /* USB HOST config */ -static struct mxc_usbh_platform_data usb_host_pdata = { +static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY, @@ -147,7 +146,7 @@ static void __init mxc_board_init(void) imx35_add_fsl_usb2_udc(&usb_otg_pdata); - mxc_register_device(&mxc_usbh1, &usb_host_pdata); + imx35_add_mxc_ehci_hs(&usb_host_pdata); imx35_add_mxc_nand(&mx35pdk_nand_board_info); imx35_add_esdhc(0, NULL); diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 20f7f94..2d29743 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -44,7 +44,6 @@ #include <mach/ipu.h> #include <mach/mx3_camera.h> #include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -538,12 +537,12 @@ static struct platform_device pcm970_sja1000 = { }; #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_pdata = { +static struct mxc_usbh_platform_data otg_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh2_pdata = { +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; @@ -654,13 +653,13 @@ static void __init mxc_board_init(void) otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_otg_host, &otg_pdata); + imx31_add_mxc_ehci_otg(&otg_pdata); } usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); #endif if (!otg_mode_host) imx31_add_fsl_usb2_udc(&otg_device_pdata); diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 78159f0..f9e7da9 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -38,7 +38,6 @@ #include <mach/iomux-mx35.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <mach/audmux.h> @@ -310,12 +309,12 @@ pcm037_nand_board_info __initconst = { }; #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_pdata = { +static struct mxc_usbh_platform_data otg_pdata __initdata = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh1_pdata = { +static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, @@ -385,10 +384,10 @@ static void __init mxc_board_init(void) otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - mxc_register_device(&mxc_otg_host, &otg_pdata); + imx35_add_mxc_ehci_otg(&otg_pdata); } - mxc_register_device(&mxc_usbh1, &usbh1_pdata); + imx35_add_mxc_ehci_hs(&usbh1_pdata); #endif if (!otg_mode_host) imx35_add_fsl_usb2_udc(&otg_device_pdata); diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 331b595..94a0b9e 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/hardware.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -185,7 +184,7 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on) return 0; } -static struct mxc_usbh_platform_data usbh1_pdata = { +static struct mxc_usbh_platform_data usbh1_pdata __initdata = { .init = devboard_usbh1_hw_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, @@ -194,6 +193,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = { static int __init devboard_usbh1_init(void) { struct otg_transceiver *otg; + struct platform_device *pdev; otg = kzalloc(sizeof(*otg), GFP_KERNEL); if (!otg) @@ -205,7 +205,11 @@ static int __init devboard_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mxc_usbh1, &usbh1_pdata); + pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index db79f74..a35e8c9 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -28,7 +28,6 @@ #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <media/soc_camera.h> @@ -302,7 +301,7 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on) return 0; } -static struct mxc_usbh_platform_data usbh1_pdata = { +static struct mxc_usbh_platform_data usbh1_pdata __initdata = { .init = marxbot_usbh1_hw_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, @@ -311,6 +310,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = { static int __init marxbot_usbh1_init(void) { struct otg_transceiver *otg; + struct platform_device *pdev; otg = kzalloc(sizeof(*otg), GFP_KERNEL); if (!otg) @@ -322,7 +322,11 @@ static int __init marxbot_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mxc_usbh1, &usbh1_pdata); + pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; } static const struct fsl_usb2_platform_data usb_pdata __initconst = { diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index 68e8ab5..8e989e5 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -27,7 +27,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31moboard.h> -#include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <media/soc_camera.h> @@ -125,17 +124,23 @@ static const struct fsl_usb2_platform_data usb_pdata __initconst = { #if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_host_pdata = { +static struct mxc_usbh_platform_data otg_host_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init smartbot_otg_host_init(void) { + struct platform_device *pdev; + otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - return mxc_register_device(&mxc_otg_host, &otg_host_pdata); + pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; } #else static inline int smartbot_otg_host_init(void) { return 0; } diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c index 9bec63f..cc488f4 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c @@ -32,6 +32,22 @@ const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX27 */ +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX31, 0, OTG); +const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = { + imx_mxc_ehci_data_entry_single(MX31, 1, HS1), + imx_mxc_ehci_data_entry_single(MX31, 2, HS2), +}; +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst = + imx_mxc_ehci_data_entry_single(MX35, 0, OTG); +const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst = + imx_mxc_ehci_data_entry_single(MX35, 1, HS); +#endif /* ifdef CONFIG_SOC_IMX35 */ + struct platform_device *__init imx_add_mxc_ehci( const struct imx_mxc_ehci_data *data, const struct mxc_usbh_platform_data *pdata) |