diff options
Diffstat (limited to 'arch')
35 files changed, 3967 insertions, 2745 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e2c79a2..d571cdb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -14,6 +14,7 @@ config ARM select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) + select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO @@ -1205,10 +1206,11 @@ config SMP depends on EXPERIMENTAL depends on GENERIC_CLOCKEVENTS depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ + ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ + ARCH_MSM_SCORPIONMP select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU + select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1283,6 +1285,7 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL + depends on !ARCH_MSM help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1291,7 +1294,7 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP default y - select HAVE_ARM_TWD + select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 2fd0b99..eac6208 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -23,7 +23,7 @@ config STRICT_DEVMEM config FRAME_POINTER bool depends on !THUMB2_KERNEL - default y if !ARM_UNWIND + default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER help If you say N here, the resulting kernel will be slightly smaller and faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index 4d8ae9d..f389b27 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -20,8 +20,8 @@ struct arch_hw_breakpoint_ctrl { struct arch_hw_breakpoint { u32 address; u32 trigger; - struct perf_event *suspended_wp; - struct arch_hw_breakpoint_ctrl ctrl; + struct arch_hw_breakpoint_ctrl step_ctrl; + struct arch_hw_breakpoint_ctrl ctrl; }; static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl) diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 1120f18..ec4327a 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -63,6 +63,11 @@ #include <asm/outercache.h> #define __exception __attribute__((section(".exception.text"))) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#define __exception_irq_entry __irq_entry +#else +#define __exception_irq_entry __exception +#endif struct thread_info; struct task_struct; diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index 491960b..124475a 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -15,13 +15,32 @@ struct undef_hook { void register_undef_hook(struct undef_hook *hook); void unregister_undef_hook(struct undef_hook *hook); +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +static inline int __in_irqentry_text(unsigned long ptr) +{ + extern char __irqentry_text_start[]; + extern char __irqentry_text_end[]; + + return ptr >= (unsigned long)&__irqentry_text_start && + ptr < (unsigned long)&__irqentry_text_end; +} +#else +static inline int __in_irqentry_text(unsigned long ptr) +{ + return 0; +} +#endif + static inline int in_exception_text(unsigned long ptr) { extern char __exception_text_start[]; extern char __exception_text_end[]; + int in; + + in = ptr >= (unsigned long)&__exception_text_start && + ptr < (unsigned long)&__exception_text_end; - return ptr >= (unsigned long)&__exception_text_start && - ptr < (unsigned long)&__exception_text_end; + return in ? : __in_irqentry_text(ptr); } extern void __init early_trap_init(void); diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index b0f11fa..c73abe4 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -5,7 +5,7 @@ CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET) AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) -ifdef CONFIG_DYNAMIC_FTRACE +ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_ftrace.o = -pg endif @@ -33,6 +33,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o +obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bb96a7d..36199ff 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -198,6 +198,7 @@ __dabt_svc: @ @ set desired IRQ state, then call main handler @ + debug_entry r1 msr cpsr_c, r9 mov r2, sp bl do_DataAbort @@ -324,6 +325,7 @@ __pabt_svc: #else bl CPU_PABORT_HANDLER #endif + debug_entry r1 msr cpsr_c, r9 @ Maybe enable interrupts mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler @@ -439,6 +441,7 @@ __dabt_usr: @ @ IRQs on, then call the main handler @ + debug_entry r1 enable_irq mov r2, sp adr lr, BSYM(ret_from_exception) @@ -703,6 +706,7 @@ __pabt_usr: #else bl CPU_PABORT_HANDLER #endif + debug_entry r1 enable_irq @ Enable interrupts mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 8bfa987..aae802e 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -141,98 +141,170 @@ ENDPROC(ret_from_fork) #endif #endif -#ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(__gnu_mcount_nc) - mov ip, lr - ldmia sp!, {lr} - mov pc, ip -ENDPROC(__gnu_mcount_nc) +.macro __mcount suffix + mcount_enter + ldr r0, =ftrace_trace_function + ldr r2, [r0] + adr r0, .Lftrace_stub + cmp r0, r2 + bne 1f + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + ldr r1, =ftrace_graph_return + ldr r2, [r1] + cmp r0, r2 + bne ftrace_graph_caller\suffix + + ldr r1, =ftrace_graph_entry + ldr r2, [r1] + ldr r0, =ftrace_graph_entry_stub + cmp r0, r2 + bne ftrace_graph_caller\suffix +#endif -ENTRY(ftrace_caller) - stmdb sp!, {r0-r3, lr} - mov r0, lr + mcount_exit + +1: mcount_get_lr r1 @ lr of instrumented func + mov r0, lr @ instrumented function + sub r0, r0, #MCOUNT_INSN_SIZE + adr lr, BSYM(2f) + mov pc, r2 +2: mcount_exit +.endm + +.macro __ftrace_caller suffix + mcount_enter + + mcount_get_lr r1 @ lr of instrumented func + mov r0, lr @ instrumented function sub r0, r0, #MCOUNT_INSN_SIZE - ldr r1, [sp, #20] - .global ftrace_call -ftrace_call: + .globl ftrace_call\suffix +ftrace_call\suffix: bl ftrace_stub - ldmia sp!, {r0-r3, ip, lr} - mov pc, ip -ENDPROC(ftrace_caller) + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_call\suffix +ftrace_graph_call\suffix: + mov r0, r0 +#endif + + mcount_exit +.endm + +.macro __ftrace_graph_caller + sub r0, fp, #4 @ &lr of instrumented routine (&parent) +#ifdef CONFIG_DYNAMIC_FTRACE + @ called from __ftrace_caller, saved in mcount_enter + ldr r1, [sp, #16] @ instrumented routine (func) +#else + @ called from __mcount, untouched in lr + mov r1, lr @ instrumented routine (func) +#endif + sub r1, r1, #MCOUNT_INSN_SIZE + mov r2, fp @ frame pointer + bl prepare_ftrace_return + mcount_exit +.endm #ifdef CONFIG_OLD_MCOUNT +/* + * mcount + */ + +.macro mcount_enter + stmdb sp!, {r0-r3, lr} +.endm + +.macro mcount_get_lr reg + ldr \reg, [fp, #-4] +.endm + +.macro mcount_exit + ldr lr, [fp, #-4] + ldmia sp!, {r0-r3, pc} +.endm + ENTRY(mcount) +#ifdef CONFIG_DYNAMIC_FTRACE stmdb sp!, {lr} ldr lr, [fp, #-4] ldmia sp!, {pc} +#else + __mcount _old +#endif ENDPROC(mcount) +#ifdef CONFIG_DYNAMIC_FTRACE ENTRY(ftrace_caller_old) - stmdb sp!, {r0-r3, lr} - ldr r1, [fp, #-4] - mov r0, lr - sub r0, r0, #MCOUNT_INSN_SIZE - - .globl ftrace_call_old -ftrace_call_old: - bl ftrace_stub - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} + __ftrace_caller _old ENDPROC(ftrace_caller_old) #endif -#else +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +ENTRY(ftrace_graph_caller_old) + __ftrace_graph_caller +ENDPROC(ftrace_graph_caller_old) +#endif -ENTRY(__gnu_mcount_nc) +.purgem mcount_enter +.purgem mcount_get_lr +.purgem mcount_exit +#endif + +/* + * __gnu_mcount_nc + */ + +.macro mcount_enter stmdb sp!, {r0-r3, lr} - ldr r0, =ftrace_trace_function - ldr r2, [r0] - adr r0, .Lftrace_stub - cmp r0, r2 - bne gnu_trace +.endm + +.macro mcount_get_lr reg + ldr \reg, [sp, #20] +.endm + +.macro mcount_exit ldmia sp!, {r0-r3, ip, lr} mov pc, ip +.endm -gnu_trace: - ldr r1, [sp, #20] @ lr of instrumented routine - mov r0, lr - sub r0, r0, #MCOUNT_INSN_SIZE - adr lr, BSYM(1f) - mov pc, r2 -1: - ldmia sp!, {r0-r3, ip, lr} +ENTRY(__gnu_mcount_nc) +#ifdef CONFIG_DYNAMIC_FTRACE + mov ip, lr + ldmia sp!, {lr} mov pc, ip +#else + __mcount +#endif ENDPROC(__gnu_mcount_nc) -#ifdef CONFIG_OLD_MCOUNT -/* - * This is under an ifdef in order to force link-time errors for people trying - * to build with !FRAME_POINTER with a GCC which doesn't use the new-style - * mcount. - */ -ENTRY(mcount) - stmdb sp!, {r0-r3, lr} - ldr r0, =ftrace_trace_function - ldr r2, [r0] - adr r0, ftrace_stub - cmp r0, r2 - bne trace - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} +#ifdef CONFIG_DYNAMIC_FTRACE +ENTRY(ftrace_caller) + __ftrace_caller +ENDPROC(ftrace_caller) +#endif -trace: - ldr r1, [fp, #-4] @ lr of instrumented routine - mov r0, lr - sub r0, r0, #MCOUNT_INSN_SIZE - mov lr, pc - mov pc, r2 - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} -ENDPROC(mcount) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +ENTRY(ftrace_graph_caller) + __ftrace_graph_caller +ENDPROC(ftrace_graph_caller) #endif -#endif /* CONFIG_DYNAMIC_FTRACE */ +.purgem mcount_enter +.purgem mcount_get_lr +.purgem mcount_exit + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl return_to_handler +return_to_handler: + stmdb sp!, {r0-r3} + mov r0, fp @ frame pointer + bl ftrace_return_to_handler + mov lr, r0 @ r0 has real ret addr + ldmia sp!, {r0-r3} + mov pc, lr +#endif ENTRY(ftrace_stub) .Lftrace_stub: diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index d93f976..ae94649 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -165,6 +165,25 @@ .endm #endif /* !CONFIG_THUMB2_KERNEL */ + @ + @ Debug exceptions are taken as prefetch or data aborts. + @ We must disable preemption during the handler so that + @ we can access the debug registers safely. + @ + .macro debug_entry, fsr +#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT) + ldr r4, =0x40f @ mask out fsr.fs + and r5, r4, \fsr + cmp r5, #2 @ debug exception + bne 1f + get_thread_info r10 + ldr r6, [r10, #TI_PREEMPT] @ get preempt count + add r11, r6, #1 @ increment it + str r11, [r10, #TI_PREEMPT] +1: +#endif + .endm + /* * These are the registers used in the syscall handler, and allow us to * have in theory up to 7 arguments to a function - r0 to r6. diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 971ac8c..c0062ad 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -24,6 +24,7 @@ #define NOP 0xe8bd4000 /* pop {lr} */ #endif +#ifdef CONFIG_DYNAMIC_FTRACE #ifdef CONFIG_OLD_MCOUNT #define OLD_MCOUNT_ADDR ((unsigned long) mcount) #define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old) @@ -59,9 +60,9 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) } #endif -/* construct a branch (BL) instruction to addr */ #ifdef CONFIG_THUMB2_KERNEL -static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr, + bool link) { unsigned long s, j1, j2, i1, i2, imm10, imm11; unsigned long first, second; @@ -83,15 +84,22 @@ static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) j2 = (!i2) ^ s; first = 0xf000 | (s << 10) | imm10; - second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11; + second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11; + if (link) + second |= 1 << 14; return (second << 16) | first; } #else -static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr, + bool link) { + unsigned long opcode = 0xea000000; long offset; + if (link) + opcode |= 1 << 24; + offset = (long)addr - (long)(pc + 8); if (unlikely(offset < -33554432 || offset > 33554428)) { /* Can't generate branches that far (from ARM ARM). Ftrace @@ -103,10 +111,15 @@ static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) offset = (offset >> 2) & 0x00ffffff; - return 0xeb000000 | offset; + return opcode | offset; } #endif +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +{ + return ftrace_gen_branch(pc, addr, true); +} + static int ftrace_modify_code(unsigned long pc, unsigned long old, unsigned long new) { @@ -193,3 +206,83 @@ int __init ftrace_dyn_arch_init(void *data) return 0; } +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, + unsigned long frame_pointer) +{ + unsigned long return_hooker = (unsigned long) &return_to_handler; + struct ftrace_graph_ent trace; + unsigned long old; + int err; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + old = *parent; + *parent = return_hooker; + + err = ftrace_push_return_trace(old, self_addr, &trace.depth, + frame_pointer); + if (err == -EBUSY) { + *parent = old; + return; + } + + trace.func = self_addr; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + *parent = old; + } +} + +#ifdef CONFIG_DYNAMIC_FTRACE +extern unsigned long ftrace_graph_call; +extern unsigned long ftrace_graph_call_old; +extern void ftrace_graph_caller_old(void); + +static int __ftrace_modify_caller(unsigned long *callsite, + void (*func) (void), bool enable) +{ + unsigned long caller_fn = (unsigned long) func; + unsigned long pc = (unsigned long) callsite; + unsigned long branch = ftrace_gen_branch(pc, caller_fn, false); + unsigned long nop = 0xe1a00000; /* mov r0, r0 */ + unsigned long old = enable ? nop : branch; + unsigned long new = enable ? branch : nop; + + return ftrace_modify_code(pc, old, new); +} + +static int ftrace_modify_graph_caller(bool enable) +{ + int ret; + + ret = __ftrace_modify_caller(&ftrace_graph_call, + ftrace_graph_caller, + enable); + +#ifdef CONFIG_OLD_MCOUNT + if (!ret) + ret = __ftrace_modify_caller(&ftrace_graph_call_old, + ftrace_graph_caller_old, + enable); +#endif + + return ret; +} + +int ftrace_enable_ftrace_graph_caller(void) +{ + return ftrace_modify_graph_caller(true); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_graph_caller(false); +} +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 21e3a4a..c9f3f04 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -24,6 +24,7 @@ #define pr_fmt(fmt) "hw-breakpoint: " fmt #include <linux/errno.h> +#include <linux/hardirq.h> #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/smp.h> @@ -44,6 +45,7 @@ static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]); /* Number of BRP/WRP registers on this CPU. */ static int core_num_brps; +static int core_num_reserved_brps; static int core_num_wrps; /* Debug architecture version. */ @@ -52,87 +54,6 @@ static u8 debug_arch; /* Maximum supported watchpoint length. */ static u8 max_watchpoint_len; -/* Determine number of BRP registers available. */ -static int get_num_brps(void) -{ - u32 didr; - ARM_DBG_READ(c0, 0, didr); - return ((didr >> 24) & 0xf) + 1; -} - -/* Determine number of WRP registers available. */ -static int get_num_wrps(void) -{ - /* - * FIXME: When a watchpoint fires, the only way to work out which - * watchpoint it was is by disassembling the faulting instruction - * and working out the address of the memory access. - * - * Furthermore, we can only do this if the watchpoint was precise - * since imprecise watchpoints prevent us from calculating register - * based addresses. - * - * For the time being, we only report 1 watchpoint register so we - * always know which watchpoint fired. In the future we can either - * add a disassembler and address generation emulator, or we can - * insert a check to see if the DFAR is set on watchpoint exception - * entry [the ARM ARM states that the DFAR is UNKNOWN, but - * experience shows that it is set on some implementations]. - */ - -#if 0 - u32 didr, wrps; - ARM_DBG_READ(c0, 0, didr); - return ((didr >> 28) & 0xf) + 1; -#endif - - return 1; -} - -int hw_breakpoint_slots(int type) -{ - /* - * We can be called early, so don't rely on - * our static variables being initialised. - */ - switch (type) { - case TYPE_INST: - return get_num_brps(); - case TYPE_DATA: - return get_num_wrps(); - default: - pr_warning("unknown slot type: %d\n", type); - return 0; - } -} - -/* Determine debug architecture. */ -static u8 get_debug_arch(void) -{ - u32 didr; - - /* Do we implement the extended CPUID interface? */ - if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); - return ARM_DEBUG_ARCH_V6; - } - - ARM_DBG_READ(c0, 0, didr); - return (didr >> 16) & 0xf; -} - -/* Does this core support mismatch breakpoints? */ -static int core_has_mismatch_bps(void) -{ - return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1; -} - -u8 arch_get_debug_arch(void) -{ - return debug_arch; -} - #define READ_WB_REG_CASE(OP2, M, VAL) \ case ((OP2 << 4) + M): \ ARM_DBG_READ(c ## M, OP2, VAL); \ @@ -210,6 +131,94 @@ static void write_wb_reg(int n, u32 val) isb(); } +/* Determine debug architecture. */ +static u8 get_debug_arch(void) +{ + u32 didr; + + /* Do we implement the extended CPUID interface? */ + if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { + pr_warning("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); + return ARM_DEBUG_ARCH_V6; + } + + ARM_DBG_READ(c0, 0, didr); + return (didr >> 16) & 0xf; +} + +u8 arch_get_debug_arch(void) +{ + return debug_arch; +} + +/* Determine number of BRP register available. */ +static int get_num_brp_resources(void) +{ + u32 didr; + ARM_DBG_READ(c0, 0, didr); + return ((didr >> 24) & 0xf) + 1; +} + +/* Does this core support mismatch breakpoints? */ +static int core_has_mismatch_brps(void) +{ + return (get_debug_arch() >= ARM_DEBUG_ARCH_V7_ECP14 && + get_num_brp_resources() > 1); +} + +/* Determine number of usable WRPs available. */ +static int get_num_wrps(void) +{ + /* + * FIXME: When a watchpoint fires, the only way to work out which + * watchpoint it was is by disassembling the faulting instruction + * and working out the address of the memory access. + * + * Furthermore, we can only do this if the watchpoint was precise + * since imprecise watchpoints prevent us from calculating register + * based addresses. + * + * Providing we have more than 1 breakpoint register, we only report + * a single watchpoint register for the time being. This way, we always + * know which watchpoint fired. In the future we can either add a + * disassembler and address generation emulator, or we can insert a + * check to see if the DFAR is set on watchpoint exception entry + * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows + * that it is set on some implementations]. + */ + +#if 0 + int wrps; + u32 didr; + ARM_DBG_READ(c0, 0, didr); + wrps = ((didr >> 28) & 0xf) + 1; +#endif + int wrps = 1; + + if (core_has_mismatch_brps() && wrps >= get_num_brp_resources()) + wrps = get_num_brp_resources() - 1; + + return wrps; +} + +/* We reserve one breakpoint for each watchpoint. */ +static int get_num_reserved_brps(void) +{ + if (core_has_mismatch_brps()) + return get_num_wrps(); + return 0; +} + +/* Determine number of usable BRPs available. */ +static int get_num_brps(void) +{ + int brps = get_num_brp_resources(); + if (core_has_mismatch_brps()) + brps -= get_num_reserved_brps(); + return brps; +} + /* * In order to access the breakpoint/watchpoint control registers, * we must be running in debug monitor mode. Unfortunately, we can @@ -230,8 +239,12 @@ static int enable_monitor_mode(void) goto out; } + /* If monitor mode is already enabled, just return. */ + if (dscr & ARM_DSCR_MDBGEN) + goto out; + /* Write to the corresponding DSCR. */ - switch (debug_arch) { + switch (get_debug_arch()) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); @@ -246,15 +259,30 @@ static int enable_monitor_mode(void) /* Check that the write made it through. */ ARM_DBG_READ(c1, 0, dscr); - if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN), - "failed to enable monitor mode.")) { + if (!(dscr & ARM_DSCR_MDBGEN)) ret = -EPERM; - } out: return ret; } +int hw_breakpoint_slots(int type) +{ + /* + * We can be called early, so don't rely on + * our static variables being initialised. + */ + switch (type) { + case TYPE_INST: + return get_num_brps(); + case TYPE_DATA: + return get_num_wrps(); + default: + pr_warning("unknown slot type: %d\n", type); + return 0; + } +} + /* * Check if 8-bit byte-address select is available. * This clobbers WRP 0. @@ -268,9 +296,6 @@ static u8 get_max_wp_len(void) if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14) goto out; - if (enable_monitor_mode()) - goto out; - memset(&ctrl, 0, sizeof(ctrl)); ctrl.len = ARM_BREAKPOINT_LEN_8; ctrl_reg = encode_ctrl_reg(ctrl); @@ -290,23 +315,6 @@ u8 arch_get_max_wp_len(void) } /* - * Handler for reactivating a suspended watchpoint when the single - * step `mismatch' breakpoint is triggered. - */ -static void wp_single_step_handler(struct perf_event *bp, int unused, - struct perf_sample_data *data, - struct pt_regs *regs) -{ - perf_event_enable(counter_arch_bp(bp)->suspended_wp); - unregister_hw_breakpoint(bp); -} - -static int bp_is_single_step(struct perf_event *bp) -{ - return bp->overflow_handler == wp_single_step_handler; -} - -/* * Install a perf counter breakpoint. */ int arch_install_hw_breakpoint(struct perf_event *bp) @@ -314,30 +322,41 @@ int arch_install_hw_breakpoint(struct perf_event *bp) struct arch_hw_breakpoint *info = counter_arch_bp(bp); struct perf_event **slot, **slots; int i, max_slots, ctrl_base, val_base, ret = 0; + u32 addr, ctrl; /* Ensure that we are in monitor mode and halting mode is disabled. */ ret = enable_monitor_mode(); if (ret) goto out; + addr = info->address; + ctrl = encode_ctrl_reg(info->ctrl) | 0x1; + if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { /* Breakpoint */ ctrl_base = ARM_BASE_BCR; val_base = ARM_BASE_BVR; - slots = __get_cpu_var(bp_on_reg); - max_slots = core_num_brps - 1; - - if (bp_is_single_step(bp)) { - info->ctrl.mismatch = 1; - i = max_slots; - slots[i] = bp; - goto setup; + slots = (struct perf_event **)__get_cpu_var(bp_on_reg); + max_slots = core_num_brps; + if (info->step_ctrl.enabled) { + /* Override the breakpoint data with the step data. */ + addr = info->trigger & ~0x3; + ctrl = encode_ctrl_reg(info->step_ctrl); } } else { /* Watchpoint */ - ctrl_base = ARM_BASE_WCR; - val_base = ARM_BASE_WVR; - slots = __get_cpu_var(wp_on_reg); + if (info->step_ctrl.enabled) { + /* Install into the reserved breakpoint region. */ + ctrl_base = ARM_BASE_BCR + core_num_brps; + val_base = ARM_BASE_BVR + core_num_brps; + /* Override the watchpoint data with the step data. */ + addr = info->trigger & ~0x3; + ctrl = encode_ctrl_reg(info->step_ctrl); + } else { + ctrl_base = ARM_BASE_WCR; + val_base = ARM_BASE_WVR; + } + slots = (struct perf_event **)__get_cpu_var(wp_on_reg); max_slots = core_num_wrps; } @@ -355,12 +374,11 @@ int arch_install_hw_breakpoint(struct perf_event *bp) goto out; } -setup: /* Setup the address register. */ - write_wb_reg(val_base + i, info->address); + write_wb_reg(val_base + i, addr); /* Setup the control register. */ - write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1); + write_wb_reg(ctrl_base + i, ctrl); out: return ret; @@ -375,18 +393,15 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { /* Breakpoint */ base = ARM_BASE_BCR; - slots = __get_cpu_var(bp_on_reg); - max_slots = core_num_brps - 1; - - if (bp_is_single_step(bp)) { - i = max_slots; - slots[i] = NULL; - goto reset; - } + slots = (struct perf_event **)__get_cpu_var(bp_on_reg); + max_slots = core_num_brps; } else { /* Watchpoint */ - base = ARM_BASE_WCR; - slots = __get_cpu_var(wp_on_reg); + if (info->step_ctrl.enabled) + base = ARM_BASE_BCR + core_num_brps; + else + base = ARM_BASE_WCR; + slots = (struct perf_event **)__get_cpu_var(wp_on_reg); max_slots = core_num_wrps; } @@ -403,7 +418,6 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) return; -reset: /* Reset the control register. */ write_wb_reg(base + i, 0); } @@ -537,12 +551,23 @@ static int arch_build_bp_info(struct perf_event *bp) return -EINVAL; } + /* + * Breakpoints must be of length 2 (thumb) or 4 (ARM) bytes. + * Watchpoints can be of length 1, 2, 4 or 8 bytes if supported + * by the hardware and must be aligned to the appropriate number of + * bytes. + */ + if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE && + info->ctrl.len != ARM_BREAKPOINT_LEN_2 && + info->ctrl.len != ARM_BREAKPOINT_LEN_4) + return -EINVAL; + /* Address */ info->address = bp->attr.bp_addr; /* Privilege */ info->ctrl.privilege = ARM_BREAKPOINT_USER; - if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp)) + if (arch_check_bp_in_kernelspace(bp)) info->ctrl.privilege |= ARM_BREAKPOINT_PRIV; /* Enabled? */ @@ -561,7 +586,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) { struct arch_hw_breakpoint *info = counter_arch_bp(bp); int ret = 0; - u32 bytelen, max_len, offset, alignment_mask = 0x3; + u32 offset, alignment_mask = 0x3; /* Build the arch_hw_breakpoint. */ ret = arch_build_bp_info(bp); @@ -571,84 +596,85 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Check address alignment. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_8) alignment_mask = 0x7; - if (info->address & alignment_mask) { - /* - * Try to fix the alignment. This may result in a length - * that is too large, so we must check for that. - */ - bytelen = get_hbp_len(info->ctrl.len); - max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 : - max_watchpoint_len; - - if (max_len >= 8) - offset = info->address & 0x7; - else - offset = info->address & 0x3; - - if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) { - ret = -EFBIG; - goto out; - } - - info->ctrl.len <<= offset; - info->address &= ~offset; - - pr_debug("breakpoint alignment fixup: length = 0x%x, " - "address = 0x%x\n", info->ctrl.len, info->address); + offset = info->address & alignment_mask; + switch (offset) { + case 0: + /* Aligned */ + break; + case 1: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; + case 2: + /* Allow halfword watchpoints and breakpoints. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) + break; + default: + ret = -EINVAL; + goto out; } + info->address &= ~alignment_mask; + info->ctrl.len <<= offset; + /* * Currently we rely on an overflow handler to take * care of single-stepping the breakpoint when it fires. * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware single-step. + * we can use the mismatch feature as a poor-man's hardware + * single-step, but this only works for per-task breakpoints. */ if (WARN_ONCE(!bp->overflow_handler && - (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()), + (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps() + || !bp->hw.bp_target), "overflow handler required but none found")) { ret = -EINVAL; - goto out; } out: return ret; } -static void update_mismatch_flag(int idx, int flag) +/* + * Enable/disable single-stepping over the breakpoint bp at address addr. + */ +static void enable_single_step(struct perf_event *bp, u32 addr) { - struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]); - struct arch_hw_breakpoint *info; - - if (bp == NULL) - return; + struct arch_hw_breakpoint *info = counter_arch_bp(bp); - info = counter_arch_bp(bp); + arch_uninstall_hw_breakpoint(bp); + info->step_ctrl.mismatch = 1; + info->step_ctrl.len = ARM_BREAKPOINT_LEN_4; + info->step_ctrl.type = ARM_BREAKPOINT_EXECUTE; + info->step_ctrl.privilege = info->ctrl.privilege; + info->step_ctrl.enabled = 1; + info->trigger = addr; + arch_install_hw_breakpoint(bp); +} - /* Update the mismatch field to enter/exit `single-step' mode */ - if (!bp->overflow_handler && info->ctrl.mismatch != flag) { - info->ctrl.mismatch = flag; - write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1); - } +static void disable_single_step(struct perf_event *bp) +{ + arch_uninstall_hw_breakpoint(bp); + counter_arch_bp(bp)->step_ctrl.enabled = 0; + arch_install_hw_breakpoint(bp); } static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) { int i; - struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg); + struct perf_event *wp, **slots; struct arch_hw_breakpoint *info; - struct perf_event_attr attr; + + slots = (struct perf_event **)__get_cpu_var(wp_on_reg); /* Without a disassembler, we can only handle 1 watchpoint. */ BUG_ON(core_num_wrps > 1); - hw_breakpoint_init(&attr); - attr.bp_addr = regs->ARM_pc & ~0x3; - attr.bp_len = HW_BREAKPOINT_LEN_4; - attr.bp_type = HW_BREAKPOINT_X; - for (i = 0; i < core_num_wrps; ++i) { rcu_read_lock(); - if (slots[i] == NULL) { + wp = slots[i]; + + if (wp == NULL) { rcu_read_unlock(); continue; } @@ -658,24 +684,51 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) * single watchpoint, we can set the trigger to the lowest * possible faulting address. */ - info = counter_arch_bp(slots[i]); - info->trigger = slots[i]->attr.bp_addr; + info = counter_arch_bp(wp); + info->trigger = wp->attr.bp_addr; pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); - perf_bp_event(slots[i], regs); + perf_bp_event(wp, regs); /* * If no overflow handler is present, insert a temporary * mismatch breakpoint so we can single-step over the * watchpoint trigger. */ - if (!slots[i]->overflow_handler) { - bp = register_user_hw_breakpoint(&attr, - wp_single_step_handler, - current); - counter_arch_bp(bp)->suspended_wp = slots[i]; - perf_event_disable(slots[i]); - } + if (!wp->overflow_handler) + enable_single_step(wp, instruction_pointer(regs)); + + rcu_read_unlock(); + } +} +static void watchpoint_single_step_handler(unsigned long pc) +{ + int i; + struct perf_event *wp, **slots; + struct arch_hw_breakpoint *info; + + slots = (struct perf_event **)__get_cpu_var(wp_on_reg); + + for (i = 0; i < core_num_reserved_brps; ++i) { + rcu_read_lock(); + + wp = slots[i]; + + if (wp == NULL) + goto unlock; + + info = counter_arch_bp(wp); + if (!info->step_ctrl.enabled) + goto unlock; + + /* + * Restore the original watchpoint if we've completed the + * single-step. + */ + if (info->trigger != pc) + disable_single_step(wp); + +unlock: rcu_read_unlock(); } } @@ -683,62 +736,69 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs) { int i; - int mismatch; u32 ctrl_reg, val, addr; - struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg); + struct perf_event *bp, **slots; struct arch_hw_breakpoint *info; struct arch_hw_breakpoint_ctrl ctrl; + slots = (struct perf_event **)__get_cpu_var(bp_on_reg); + /* The exception entry code places the amended lr in the PC. */ addr = regs->ARM_pc; + /* Check the currently installed breakpoints first. */ for (i = 0; i < core_num_brps; ++i) { rcu_read_lock(); bp = slots[i]; - if (bp == NULL) { - rcu_read_unlock(); - continue; - } + if (bp == NULL) + goto unlock; - mismatch = 0; + info = counter_arch_bp(bp); /* Check if the breakpoint value matches. */ val = read_wb_reg(ARM_BASE_BVR + i); if (val != (addr & ~0x3)) - goto unlock; + goto mismatch; /* Possible match, check the byte address select to confirm. */ ctrl_reg = read_wb_reg(ARM_BASE_BCR + i); decode_ctrl_reg(ctrl_reg, &ctrl); if ((1 << (addr & 0x3)) & ctrl.len) { - mismatch = 1; - info = counter_arch_bp(bp); info->trigger = addr; - } - -unlock: - if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) { pr_debug("breakpoint fired: address = 0x%x\n", addr); perf_bp_event(bp, regs); + if (!bp->overflow_handler) + enable_single_step(bp, addr); + goto unlock; } - update_mismatch_flag(i, mismatch); +mismatch: + /* If we're stepping a breakpoint, it can now be restored. */ + if (info->step_ctrl.enabled) + disable_single_step(bp); +unlock: rcu_read_unlock(); } + + /* Handle any pending watchpoint single-step breakpoints. */ + watchpoint_single_step_handler(addr); } /* * Called from either the Data Abort Handler [watchpoint] or the - * Prefetch Abort Handler [breakpoint]. + * Prefetch Abort Handler [breakpoint] with preemption disabled. */ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - int ret = 1; /* Unhandled fault. */ + int ret = 0; u32 dscr; + /* We must be called with preemption disabled. */ + WARN_ON(preemptible()); + /* We only handle watchpoints and hardware breakpoints. */ ARM_DBG_READ(c1, 0, dscr); @@ -753,25 +813,47 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, watchpoint_handler(addr, regs); break; default: - goto out; + ret = 1; /* Unhandled fault. */ } - ret = 0; -out: + /* + * Re-enable preemption after it was disabled in the + * low-level exception handling code. + */ + preempt_enable(); + return ret; } /* * One-time initialisation. */ -static void __init reset_ctrl_regs(void *unused) +static void reset_ctrl_regs(void *unused) { int i; + /* + * v7 debug contains save and restore registers so that debug state + * can be maintained across low-power modes without leaving + * the debug logic powered up. It is IMPLEMENTATION DEFINED whether + * we can write to the debug registers out of reset, so we must + * unlock the OS Lock Access Register to avoid taking undefined + * instruction exceptions later on. + */ + if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { + /* + * Unconditionally clear the lock by writing a value + * other than 0xC5ACCE55 to the access register. + */ + asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); + isb(); + } + if (enable_monitor_mode()) return; - for (i = 0; i < core_num_brps; ++i) { + /* We must also reset any reserved registers. */ + for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) { write_wb_reg(ARM_BASE_BCR + i, 0UL); write_wb_reg(ARM_BASE_BVR + i, 0UL); } @@ -782,45 +864,57 @@ static void __init reset_ctrl_regs(void *unused) } } +static int __cpuinit dbg_reset_notify(struct notifier_block *self, + unsigned long action, void *cpu) +{ + if (action == CPU_ONLINE) + smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1); + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata dbg_reset_nb = { + .notifier_call = dbg_reset_notify, +}; + static int __init arch_hw_breakpoint_init(void) { - int ret = 0; u32 dscr; debug_arch = get_debug_arch(); if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { pr_info("debug architecture 0x%x unsupported.\n", debug_arch); - ret = -ENODEV; - goto out; + return 0; } /* Determine how many BRPs/WRPs are available. */ core_num_brps = get_num_brps(); + core_num_reserved_brps = get_num_reserved_brps(); core_num_wrps = get_num_wrps(); pr_info("found %d breakpoint and %d watchpoint registers.\n", - core_num_brps, core_num_wrps); + core_num_brps + core_num_reserved_brps, core_num_wrps); - if (core_has_mismatch_bps()) - pr_info("1 breakpoint reserved for watchpoint single-step.\n"); + if (core_num_reserved_brps) + pr_info("%d breakpoint(s) reserved for watchpoint " + "single-step.\n", core_num_reserved_brps); ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { pr_warning("halting debug mode enabled. Assuming maximum " "watchpoint size of 4 bytes."); } else { - /* Work out the maximum supported watchpoint length. */ - max_watchpoint_len = get_max_wp_len(); - pr_info("maximum watchpoint size is %u bytes.\n", - max_watchpoint_len); - /* * Reset the breakpoint resources. We assume that a halting * debugger will leave the world in a nice state for us. */ smp_call_function(reset_ctrl_regs, NULL, 1); reset_ctrl_regs(NULL); + + /* Work out the maximum supported watchpoint length. */ + max_watchpoint_len = get_max_wp_len(); + pr_info("maximum watchpoint size is %u bytes.\n", + max_watchpoint_len); } /* Register debug fault handler. */ @@ -829,8 +923,9 @@ static int __init arch_hw_breakpoint_init(void) hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, "breakpoint debug exception"); -out: - return ret; + /* Register hotplug notifier. */ + register_cpu_notifier(&dbg_reset_nb); + return 0; } arch_initcall(arch_hw_breakpoint_init); diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 36ad3be..6d61633 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -35,6 +35,7 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> +#include <linux/ftrace.h> #include <asm/system.h> #include <asm/mach/irq.h> @@ -105,7 +106,8 @@ unlock: * come via this function. Instead, they should provide their * own 'handler' */ -asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +asmlinkage void __exception_irq_entry +asm_do_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 07a5035..624e2a5 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -4,9 +4,7 @@ * ARM performance counter support. * * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles - * - * ARMv7 support: Jean Pihet <jpihet@mvista.com> - * 2010 (c) MontaVista Software, LLC. + * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com> * * This code is based on the sparc64 perf event code, which is in turn based * on the x86 code. Callchain code is based on the ARM OProfile backtrace @@ -34,7 +32,7 @@ static struct platform_device *pmu_device; * Hardware lock to serialize accesses to PMU registers. Needed for the * read/modify/write sequences. */ -DEFINE_SPINLOCK(pmu_lock); +static DEFINE_RAW_SPINLOCK(pmu_lock); /* * ARMv6 supports a maximum of 3 events, starting from index 1. If we add @@ -67,31 +65,25 @@ struct cpu_hw_events { */ unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; }; -DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); - -/* PMU names. */ -static const char *arm_pmu_names[] = { - [ARM_PERF_PMU_ID_XSCALE1] = "xscale1", - [ARM_PERF_PMU_ID_XSCALE2] = "xscale2", - [ARM_PERF_PMU_ID_V6] = "v6", - [ARM_PERF_PMU_ID_V6MP] = "v6mpcore", - [ARM_PERF_PMU_ID_CA8] = "ARMv7 Cortex-A8", - [ARM_PERF_PMU_ID_CA9] = "ARMv7 Cortex-A9", -}; +static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); struct arm_pmu { enum arm_perf_pmu_ids id; + const char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); void (*enable)(struct hw_perf_event *evt, int idx); void (*disable)(struct hw_perf_event *evt, int idx); - int (*event_map)(int evt); - u64 (*raw_event)(u64); int (*get_event_idx)(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc); u32 (*read_counter)(int idx); void (*write_counter)(int idx, u32 val); void (*start)(void); void (*stop)(void); + const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; + const unsigned (*event_map)[PERF_COUNT_HW_MAX]; + u32 raw_event_mask; int num_events; u64 max_period; }; @@ -136,10 +128,6 @@ EXPORT_SYMBOL_GPL(perf_num_counters); #define CACHE_OP_UNSUPPORTED 0xFFFF -static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; - static int armpmu_map_cache_event(u64 config) { @@ -157,7 +145,7 @@ armpmu_map_cache_event(u64 config) if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) return -EINVAL; - ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result]; + ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result]; if (ret == CACHE_OP_UNSUPPORTED) return -ENOENT; @@ -166,6 +154,19 @@ armpmu_map_cache_event(u64 config) } static int +armpmu_map_event(u64 config) +{ + int mapping = (*armpmu->event_map)[config]; + return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping; +} + +static int +armpmu_map_raw_event(u64 config) +{ + return (int)(config & armpmu->raw_event_mask); +} + +static int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx) @@ -458,11 +459,11 @@ __hw_perf_event_init(struct perf_event *event) /* Decode the generic type into an ARM event identifier. */ if (PERF_TYPE_HARDWARE == event->attr.type) { - mapping = armpmu->event_map(event->attr.config); + mapping = armpmu_map_event(event->attr.config); } else if (PERF_TYPE_HW_CACHE == event->attr.type) { mapping = armpmu_map_cache_event(event->attr.config); } else if (PERF_TYPE_RAW == event->attr.type) { - mapping = armpmu->raw_event(event->attr.config); + mapping = armpmu_map_raw_event(event->attr.config); } else { pr_debug("event type %x not supported\n", event->attr.type); return -EOPNOTSUPP; @@ -603,2366 +604,10 @@ static struct pmu pmu = { .read = armpmu_read, }; -/* - * ARMv6 Performance counter handling code. - * - * ARMv6 has 2 configurable performance counters and a single cycle counter. - * They all share a single reset bit but can be written to zero so we can use - * that for a reset. - * - * The counters can't be individually enabled or disabled so when we remove - * one event and replace it with another we could get spurious counts from the - * wrong event. However, we can take advantage of the fact that the - * performance counters can export events to the event bus, and the event bus - * itself can be monitored. This requires that we *don't* export the events to - * the event bus. The procedure for disabling a configurable counter is: - * - change the counter to count the ETMEXTOUT[0] signal (0x20). This - * effectively stops the counter from counting. - * - disable the counter's interrupt generation (each counter has it's - * own interrupt enable bit). - * Once stopped, the counter value can be written as 0 to reset. - * - * To enable a counter: - * - enable the counter's interrupt generation. - * - set the new event type. - * - * Note: the dedicated cycle counter only counts cycles and can't be - * enabled/disabled independently of the others. When we want to disable the - * cycle counter, we have to just disable the interrupt reporting and start - * ignoring that counter. When re-enabling, we have to reset the value and - * enable the interrupt. - */ - -enum armv6_perf_types { - ARMV6_PERFCTR_ICACHE_MISS = 0x0, - ARMV6_PERFCTR_IBUF_STALL = 0x1, - ARMV6_PERFCTR_DDEP_STALL = 0x2, - ARMV6_PERFCTR_ITLB_MISS = 0x3, - ARMV6_PERFCTR_DTLB_MISS = 0x4, - ARMV6_PERFCTR_BR_EXEC = 0x5, - ARMV6_PERFCTR_BR_MISPREDICT = 0x6, - ARMV6_PERFCTR_INSTR_EXEC = 0x7, - ARMV6_PERFCTR_DCACHE_HIT = 0x9, - ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, - ARMV6_PERFCTR_DCACHE_MISS = 0xB, - ARMV6_PERFCTR_DCACHE_WBACK = 0xC, - ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, - ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, - ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, - ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, - ARMV6_PERFCTR_WBUF_DRAINED = 0x12, - ARMV6_PERFCTR_CPU_CYCLES = 0xFF, - ARMV6_PERFCTR_NOP = 0x20, -}; - -enum armv6_counters { - ARMV6_CYCLE_COUNTER = 1, - ARMV6_COUNTER0, - ARMV6_COUNTER1, -}; - -/* - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -enum armv6mpcore_perf_types { - ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0, - ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1, - ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2, - ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3, - ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4, - ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5, - ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6, - ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7, - ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8, - ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA, - ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB, - ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC, - ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD, - ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE, - ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF, - ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10, - ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11, - ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12, - ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13, - ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF, -}; - -/* - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -static inline unsigned long -armv6_pmcr_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); - return val; -} - -static inline void -armv6_pmcr_write(unsigned long val) -{ - asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); -} - -#define ARMV6_PMCR_ENABLE (1 << 0) -#define ARMV6_PMCR_CTR01_RESET (1 << 1) -#define ARMV6_PMCR_CCOUNT_RESET (1 << 2) -#define ARMV6_PMCR_CCOUNT_DIV (1 << 3) -#define ARMV6_PMCR_COUNT0_IEN (1 << 4) -#define ARMV6_PMCR_COUNT1_IEN (1 << 5) -#define ARMV6_PMCR_CCOUNT_IEN (1 << 6) -#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) -#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) -#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) -#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 -#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) -#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 -#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) - -#define ARMV6_PMCR_OVERFLOWED_MASK \ - (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ - ARMV6_PMCR_CCOUNT_OVERFLOW) - -static inline int -armv6_pmcr_has_overflowed(unsigned long pmcr) -{ - return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK); -} - -static inline int -armv6_pmcr_counter_has_overflowed(unsigned long pmcr, - enum armv6_counters counter) -{ - int ret = 0; - - if (ARMV6_CYCLE_COUNTER == counter) - ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; - else if (ARMV6_COUNTER0 == counter) - ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; - else if (ARMV6_COUNTER1 == counter) - ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - - return ret; -} - -static inline u32 -armv6pmu_read_counter(int counter) -{ - unsigned long value = 0; - - if (ARMV6_CYCLE_COUNTER == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); - else if (ARMV6_COUNTER0 == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); - else if (ARMV6_COUNTER1 == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - - return value; -} - -static inline void -armv6pmu_write_counter(int counter, - u32 value) -{ - if (ARMV6_CYCLE_COUNTER == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); - else if (ARMV6_COUNTER0 == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); - else if (ARMV6_COUNTER1 == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); -} - -void -armv6pmu_enable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, evt, flags; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = 0; - evt = ARMV6_PMCR_CCOUNT_IEN; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_EVT_COUNT0_MASK; - evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | - ARMV6_PMCR_COUNT0_IEN; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_EVT_COUNT1_MASK; - evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | - ARMV6_PMCR_COUNT1_IEN; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Mask out the current event and set the counter to count the event - * that we're interested in. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static irqreturn_t -armv6pmu_handle_irq(int irq_num, - void *dev) -{ - unsigned long pmcr = armv6_pmcr_read(); - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - if (!armv6_pmcr_has_overflowed(pmcr)) - return IRQ_NONE; - - regs = get_irq_regs(); - - /* - * The interrupts are cleared by writing the overflow flags back to - * the control register. All of the other bits don't have any effect - * if they are rewritten, so write the whole value back. - */ - armv6_pmcr_write(pmcr); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - /* - * Handle the pending perf events. - * - * Note: this call *must* be run with interrupts disabled. For - * platforms that can have the PMU interrupts raised as an NMI, this - * will not work. - */ - irq_work_run(); - - return IRQ_HANDLED; -} - -static void -armv6pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val |= ARMV6_PMCR_ENABLE; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -void -armv6pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~ARMV6_PMCR_ENABLE; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline int -armv6pmu_event_map(int config) -{ - int mapping = armv6_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static inline int -armv6mpcore_pmu_event_map(int config) -{ - int mapping = armv6mpcore_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static u64 -armv6pmu_raw_event(u64 config) -{ - return config & 0xff; -} - -static int -armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - /* Always place a cycle counter into the cycle counter. */ - if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { - if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return ARMV6_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * counter0 and counter1. - */ - if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) { - return ARMV6_COUNTER1; - } - - if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) { - return ARMV6_COUNTER0; - } - - /* The counters are all in use. */ - return -EAGAIN; - } -} - -static void -armv6pmu_disable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, evt, flags; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = ARMV6_PMCR_CCOUNT_IEN; - evt = 0; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; - evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; - evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Mask out the current event and set the counter to count the number - * of ETM bus signal assertion cycles. The external reporting should - * be disabled and so this should never increment. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, flags, evt = 0; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = ARMV6_PMCR_CCOUNT_IEN; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_COUNT0_IEN; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_COUNT1_IEN; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Unlike UP ARMv6, we don't have a way of stopping the counters. We - * simply disable the interrupt reporting. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static const struct arm_pmu armv6pmu = { - .id = ARM_PERF_PMU_ID_V6, - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6pmu_disable_event, - .event_map = armv6pmu_event_map, - .raw_event = armv6pmu_raw_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -/* - * ARMv6mpcore is almost identical to single core ARMv6 with the exception - * that some of the events have different enumerations and that there is no - * *hack* to stop the programmable counters. To stop the counters we simply - * disable the interrupt reporting and update the event. When unthrottling we - * reset the period and enable the interrupt reporting. - */ -static const struct arm_pmu armv6mpcore_pmu = { - .id = ARM_PERF_PMU_ID_V6MP, - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6mpcore_pmu_disable_event, - .event_map = armv6mpcore_pmu_event_map, - .raw_event = armv6pmu_raw_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -/* - * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code. - * - * Copied from ARMv6 code, with the low level code inspired - * by the ARMv7 Oprofile code. - * - * Cortex-A8 has up to 4 configurable performance counters and - * a single cycle counter. - * Cortex-A9 has up to 31 configurable performance counters and - * a single cycle counter. - * - * All counters can be enabled/disabled and IRQ masked separately. The cycle - * counter and all 4 performance counters together can be reset separately. - */ - -/* Common ARMv7 event types */ -enum armv7_perf_types { - ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, - ARMV7_PERFCTR_IFETCH_MISS = 0x01, - ARMV7_PERFCTR_ITLB_MISS = 0x02, - ARMV7_PERFCTR_DCACHE_REFILL = 0x03, - ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, - ARMV7_PERFCTR_DTLB_REFILL = 0x05, - ARMV7_PERFCTR_DREAD = 0x06, - ARMV7_PERFCTR_DWRITE = 0x07, - - ARMV7_PERFCTR_EXC_TAKEN = 0x09, - ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, - ARMV7_PERFCTR_CID_WRITE = 0x0B, - /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. - * It counts: - * - all branch instructions, - * - instructions that explicitly write the PC, - * - exception generating instructions. - */ - ARMV7_PERFCTR_PC_WRITE = 0x0C, - ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, - ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, - ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, - ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, - - ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12, - - ARMV7_PERFCTR_CPU_CYCLES = 0xFF -}; - -/* ARMv7 Cortex-A8 specific event types */ -enum armv7_a8_perf_types { - ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, - - ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, - - ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, - ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, - ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, - ARMV7_PERFCTR_L2_ACCESS = 0x43, - ARMV7_PERFCTR_L2_CACH_MISS = 0x44, - ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45, - ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46, - ARMV7_PERFCTR_MEMORY_REPLAY = 0x47, - ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48, - ARMV7_PERFCTR_L1_DATA_MISS = 0x49, - ARMV7_PERFCTR_L1_INST_MISS = 0x4A, - ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B, - ARMV7_PERFCTR_L1_NEON_DATA = 0x4C, - ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D, - ARMV7_PERFCTR_L2_NEON = 0x4E, - ARMV7_PERFCTR_L2_NEON_HIT = 0x4F, - ARMV7_PERFCTR_L1_INST = 0x50, - ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51, - ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52, - ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53, - ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54, - ARMV7_PERFCTR_OP_EXECUTED = 0x55, - ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56, - ARMV7_PERFCTR_CYCLES_INST = 0x57, - ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58, - ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59, - ARMV7_PERFCTR_NEON_CYCLES = 0x5A, - - ARMV7_PERFCTR_PMU0_EVENTS = 0x70, - ARMV7_PERFCTR_PMU1_EVENTS = 0x71, - ARMV7_PERFCTR_PMU_EVENTS = 0x72, -}; - -/* ARMv7 Cortex-A9 specific event types */ -enum armv7_a9_perf_types { - ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40, - ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41, - ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42, - - ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50, - ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51, - - ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60, - ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61, - ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62, - ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63, - ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64, - ARMV7_PERFCTR_DATA_EVICTION = 0x65, - ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66, - ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67, - ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68, - - ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E, - - ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70, - ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71, - ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72, - ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73, - ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74, - - ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80, - ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81, - ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82, - ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83, - ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84, - ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85, - ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86, - - ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A, - ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B, - - ARMV7_PERFCTR_ISB_INST = 0x90, - ARMV7_PERFCTR_DSB_INST = 0x91, - ARMV7_PERFCTR_DMB_INST = 0x92, - ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93, - - ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0, - ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1, - ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2, - ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3, - ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4, - ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 -}; - -/* - * Cortex-A8 HW events mapping - * - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * Only ITLB misses and DTLB refills are supported. - * If users want the DTLB refills misses a raw counter - * must be used. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -/* - * Cortex-A9 HW events mapping - */ -static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = - ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * Only ITLB misses and DTLB refills are supported. - * If users want the DTLB refills misses a raw counter - * must be used. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -/* - * Perf Events counters - */ -enum armv7_counters { - ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ - ARMV7_COUNTER0 = 2, /* First event counter */ -}; - -/* - * The cycle counter is ARMV7_CYCLE_COUNTER. - * The first event counter is ARMV7_COUNTER0. - * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). - */ -#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) - -/* - * ARMv7 low level PMNC access - */ - -/* - * Per-CPU PMNC: config reg - */ -#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ -#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ -#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ -#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ -#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ -#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ -#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ -#define ARMV7_PMNC_N_MASK 0x1f -#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ - -/* - * Available counters - */ -#define ARMV7_CNT0 0 /* First event counter */ -#define ARMV7_CCNT 31 /* Cycle counter */ - -/* Perf Event to low level counters mapping */ -#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) - -/* - * CNTENS: counters enable reg - */ -#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENS_C (1 << ARMV7_CCNT) - -/* - * CNTENC: counters disable reg - */ -#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENC_C (1 << ARMV7_CCNT) - -/* - * INTENS: counters overflow interrupt enable reg - */ -#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENS_C (1 << ARMV7_CCNT) - -/* - * INTENC: counters overflow interrupt disable reg - */ -#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENC_C (1 << ARMV7_CCNT) - -/* - * EVTSEL: Event selection reg - */ -#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ - -/* - * SELECT: Counter selection reg - */ -#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ - -/* - * FLAG: counters overflow flag status reg - */ -#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_FLAG_C (1 << ARMV7_CCNT) -#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ -#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK - -static inline unsigned long armv7_pmnc_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); - return val; -} - -static inline void armv7_pmnc_write(unsigned long val) -{ - val &= ARMV7_PMNC_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); -} - -static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) -{ - return pmnc & ARMV7_OVERFLOWED_MASK; -} - -static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, - enum armv7_counters counter) -{ - int ret = 0; - - if (counter == ARMV7_CYCLE_COUNTER) - ret = pmnc & ARMV7_FLAG_C; - else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) - ret = pmnc & ARMV7_FLAG_P(counter); - else - pr_err("CPU%u checking wrong counter %d overflow status\n", - smp_processor_id(), counter); - - return ret; -} - -static inline int armv7_pmnc_select_counter(unsigned int idx) -{ - u32 val; - - if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { - pr_err("CPU%u selecting wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); - - return idx; -} - -static inline u32 armv7pmu_read_counter(int idx) -{ - unsigned long value = 0; - - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mrc p15, 0, %0, c9, c13, 2" - : "=r" (value)); - } else - pr_err("CPU%u reading wrong counter %d\n", - smp_processor_id(), idx); - - return value; -} - -static inline void armv7pmu_write_counter(int idx, u32 value) -{ - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mcr p15, 0, %0, c9, c13, 2" - : : "r" (value)); - } else - pr_err("CPU%u writing wrong counter %d\n", - smp_processor_id(), idx); -} - -static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) -{ - if (armv7_pmnc_select_counter(idx) == idx) { - val &= ARMV7_EVTSEL_MASK; - asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); - } -} - -static inline u32 armv7_pmnc_enable_counter(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENS_C; - else - val = ARMV7_CNTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_disable_counter(unsigned int idx) -{ - u32 val; - - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENC_C; - else - val = ARMV7_CNTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_enable_intens(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENS_C; - else - val = ARMV7_INTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_disable_intens(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENC_C; - else - val = ARMV7_INTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_getreset_flags(void) -{ - u32 val; - - /* Read */ - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - - /* Write to clear flags */ - val &= ARMV7_FLAG_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); - - return val; -} - -#ifdef DEBUG -static void armv7_pmnc_dump_regs(void) -{ - u32 val; - unsigned int cnt; - - printk(KERN_INFO "PMNC registers dump:\n"); - - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); - printk(KERN_INFO "PMNC =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); - printk(KERN_INFO "CNTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); - printk(KERN_INFO "INTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - printk(KERN_INFO "FLAGS =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); - printk(KERN_INFO "SELECT=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); - printk(KERN_INFO "CCNT =0x%08x\n", val); - - for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { - armv7_pmnc_select_counter(cnt); - asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); - printk(KERN_INFO "CNT[%d] count =0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); - asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); - printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); - } -} -#endif - -void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags; - - /* - * Enable counter and interrupt, and set the counter to count - * the event that we're interested in. - */ - spin_lock_irqsave(&pmu_lock, flags); - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(idx); - - /* - * Set event (if destined for PMNx counters) - * We don't need to set the event if it's a cycle count - */ - if (idx != ARMV7_CYCLE_COUNTER) - armv7_pmnc_write_evtsel(idx, hwc->config_base); - - /* - * Enable interrupt for this counter - */ - armv7_pmnc_enable_intens(idx); - - /* - * Enable counter - */ - armv7_pmnc_enable_counter(idx); - - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags; - - /* - * Disable counter and interrupt - */ - spin_lock_irqsave(&pmu_lock, flags); - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(idx); - - /* - * Disable interrupt for this counter - */ - armv7_pmnc_disable_intens(idx); - - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* - * Get and reset the IRQ flags - */ - pmnc = armv7_pmnc_getreset_flags(); - - /* - * Did an overflow occur? - */ - if (!armv7_pmnc_has_overflowed(pmnc)) - return IRQ_NONE; - - /* - * Handle the counter(s) overflow(s) - */ - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv7_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - /* - * Handle the pending perf events. - * - * Note: this call *must* be run with interrupts disabled. For - * platforms that can have the PMU interrupts raised as an NMI, this - * will not work. - */ - irq_work_run(); - - return IRQ_HANDLED; -} - -static void armv7pmu_start(void) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_lock, flags); - /* Enable all counters */ - armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void armv7pmu_stop(void) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_lock, flags); - /* Disable all counters */ - armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline int armv7_a8_pmu_event_map(int config) -{ - int mapping = armv7_a8_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static inline int armv7_a9_pmu_event_map(int config) -{ - int mapping = armv7_a9_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static u64 armv7pmu_raw_event(u64 config) -{ - return config & 0xff; -} - -static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - int idx; - - /* Always place a cycle counter into the cycle counter. */ - if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { - if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return ARMV7_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * the events counters - */ - for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { - if (!test_and_set_bit(idx, cpuc->used_mask)) - return idx; - } - - /* The counters are all in use. */ - return -EAGAIN; - } -} - -static struct arm_pmu armv7pmu = { - .handle_irq = armv7pmu_handle_irq, - .enable = armv7pmu_enable_event, - .disable = armv7pmu_disable_event, - .raw_event = armv7pmu_raw_event, - .read_counter = armv7pmu_read_counter, - .write_counter = armv7pmu_write_counter, - .get_event_idx = armv7pmu_get_event_idx, - .start = armv7pmu_start, - .stop = armv7pmu_stop, - .max_period = (1LLU << 32) - 1, -}; - -static u32 __init armv7_reset_read_pmnc(void) -{ - u32 nb_cnt; - - /* Initialize & Reset PMNC: C and P bits */ - armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); - - /* Read the nb of CNTx counters supported from PMNC */ - nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; - - /* Add the CPU cycles counter and return */ - return nb_cnt + 1; -} - -/* - * ARMv5 [xscale] Performance counter handling code. - * - * Based on xscale OProfile code. - * - * There are two variants of the xscale PMU that we support: - * - xscale1pmu: 2 event counters and a cycle counter - * - xscale2pmu: 4 event counters and a cycle counter - * The two variants share event definitions, but have different - * PMU structures. - */ - -enum xscale_perf_types { - XSCALE_PERFCTR_ICACHE_MISS = 0x00, - XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, - XSCALE_PERFCTR_DATA_STALL = 0x02, - XSCALE_PERFCTR_ITLB_MISS = 0x03, - XSCALE_PERFCTR_DTLB_MISS = 0x04, - XSCALE_PERFCTR_BRANCH = 0x05, - XSCALE_PERFCTR_BRANCH_MISS = 0x06, - XSCALE_PERFCTR_INSTRUCTION = 0x07, - XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, - XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, - XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, - XSCALE_PERFCTR_DCACHE_MISS = 0x0B, - XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, - XSCALE_PERFCTR_PC_CHANGED = 0x0D, - XSCALE_PERFCTR_BCU_REQUEST = 0x10, - XSCALE_PERFCTR_BCU_FULL = 0x11, - XSCALE_PERFCTR_BCU_DRAIN = 0x12, - XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, - XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, - XSCALE_PERFCTR_RMW = 0x16, - /* XSCALE_PERFCTR_CCNT is not hardware defined */ - XSCALE_PERFCTR_CCNT = 0xFE, - XSCALE_PERFCTR_UNUSED = 0xFF, -}; - -enum xscale_counters { - XSCALE_CYCLE_COUNTER = 1, - XSCALE_COUNTER0, - XSCALE_COUNTER1, - XSCALE_COUNTER2, - XSCALE_COUNTER3, -}; - -static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, - [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, - [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -#define XSCALE_PMU_ENABLE 0x001 -#define XSCALE_PMN_RESET 0x002 -#define XSCALE_CCNT_RESET 0x004 -#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) -#define XSCALE_PMU_CNT64 0x008 - -static inline int -xscalepmu_event_map(int config) -{ - int mapping = xscale_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static u64 -xscalepmu_raw_event(u64 config) -{ - return config & 0xff; -} - -#define XSCALE1_OVERFLOWED_MASK 0x700 -#define XSCALE1_CCOUNT_OVERFLOW 0x400 -#define XSCALE1_COUNT0_OVERFLOW 0x100 -#define XSCALE1_COUNT1_OVERFLOW 0x200 -#define XSCALE1_CCOUNT_INT_EN 0x040 -#define XSCALE1_COUNT0_INT_EN 0x010 -#define XSCALE1_COUNT1_INT_EN 0x020 -#define XSCALE1_COUNT0_EVT_SHFT 12 -#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) -#define XSCALE1_COUNT1_EVT_SHFT 20 -#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) - -static inline u32 -xscale1pmu_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); - return val; -} - -static inline void -xscale1pmu_write_pmnc(u32 val) -{ - /* upper 4bits and 7, 11 are write-as-0 */ - val &= 0xffff77f; - asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); -} - -static inline int -xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, - enum xscale_counters counter) -{ - int ret = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ret = pmnc & XSCALE1_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ret = pmnc & XSCALE1_COUNT1_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - } - - return ret; -} - -static irqreturn_t -xscale1pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* - * NOTE: there's an A stepping erratum that states if an overflow - * bit already exists and another occurs, the previous - * Overflow bit gets cleared. There's no workaround. - * Fixed in B stepping or later. - */ - pmnc = xscale1pmu_read_pmnc(); - - /* - * Write the value back to clear the overflow flags. Overflow - * flags remain in pmnc for use below. We also disable the PMU - * while we process the interrupt. - */ - xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); - - if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) - return IRQ_NONE; - - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - irq_work_run(); - - /* - * Re-enable the PMU. - */ - pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static void -xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long val, mask, evt, flags; - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - mask = 0; - evt = XSCALE1_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - mask = XSCALE1_COUNT0_EVT_MASK; - evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | - XSCALE1_COUNT0_INT_EN; - break; - case XSCALE_COUNTER1: - mask = XSCALE1_COUNT1_EVT_MASK; - evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | - XSCALE1_COUNT1_INT_EN; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~mask; - val |= evt; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long val, mask, evt, flags; - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - mask = XSCALE1_CCOUNT_INT_EN; - evt = 0; - break; - case XSCALE_COUNTER0: - mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; - evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; - evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~mask; - val |= evt; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static int -xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - if (XSCALE_PERFCTR_CCNT == event->config_base) { - if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return XSCALE_CYCLE_COUNTER; - } else { - if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) { - return XSCALE_COUNTER1; - } - - if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) { - return XSCALE_COUNTER0; - } - - return -EAGAIN; - } -} - -static void -xscale1pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val |= XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale1pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline u32 -xscale1pmu_read_counter(int counter) -{ - u32 val = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); - break; - } - - return val; -} - -static inline void -xscale1pmu_write_counter(int counter, u32 val) -{ - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); - break; - } -} - -static const struct arm_pmu xscale1pmu = { - .id = ARM_PERF_PMU_ID_XSCALE1, - .handle_irq = xscale1pmu_handle_irq, - .enable = xscale1pmu_enable_event, - .disable = xscale1pmu_disable_event, - .event_map = xscalepmu_event_map, - .raw_event = xscalepmu_raw_event, - .read_counter = xscale1pmu_read_counter, - .write_counter = xscale1pmu_write_counter, - .get_event_idx = xscale1pmu_get_event_idx, - .start = xscale1pmu_start, - .stop = xscale1pmu_stop, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -#define XSCALE2_OVERFLOWED_MASK 0x01f -#define XSCALE2_CCOUNT_OVERFLOW 0x001 -#define XSCALE2_COUNT0_OVERFLOW 0x002 -#define XSCALE2_COUNT1_OVERFLOW 0x004 -#define XSCALE2_COUNT2_OVERFLOW 0x008 -#define XSCALE2_COUNT3_OVERFLOW 0x010 -#define XSCALE2_CCOUNT_INT_EN 0x001 -#define XSCALE2_COUNT0_INT_EN 0x002 -#define XSCALE2_COUNT1_INT_EN 0x004 -#define XSCALE2_COUNT2_INT_EN 0x008 -#define XSCALE2_COUNT3_INT_EN 0x010 -#define XSCALE2_COUNT0_EVT_SHFT 0 -#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) -#define XSCALE2_COUNT1_EVT_SHFT 8 -#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) -#define XSCALE2_COUNT2_EVT_SHFT 16 -#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) -#define XSCALE2_COUNT3_EVT_SHFT 24 -#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) - -static inline u32 -xscale2pmu_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); - /* bits 1-2 and 4-23 are read-unpredictable */ - return val & 0xff000009; -} - -static inline void -xscale2pmu_write_pmnc(u32 val) -{ - /* bits 4-23 are write-as-0, 24-31 are write ignored */ - val &= 0xf; - asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); -} - -static inline u32 -xscale2pmu_read_overflow_flags(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); - return val; -} - -static inline void -xscale2pmu_write_overflow_flags(u32 val) -{ - asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); -} - -static inline u32 -xscale2pmu_read_event_select(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); - return val; -} - -static inline void -xscale2pmu_write_event_select(u32 val) -{ - asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); -} - -static inline u32 -xscale2pmu_read_int_enable(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); - return val; -} - -static void -xscale2pmu_write_int_enable(u32 val) -{ - asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); -} - -static inline int -xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, - enum xscale_counters counter) -{ - int ret = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ret = of_flags & XSCALE2_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ret = of_flags & XSCALE2_COUNT1_OVERFLOW; - break; - case XSCALE_COUNTER2: - ret = of_flags & XSCALE2_COUNT2_OVERFLOW; - break; - case XSCALE_COUNTER3: - ret = of_flags & XSCALE2_COUNT3_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - } - - return ret; -} - -static irqreturn_t -xscale2pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc, of_flags; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* Disable the PMU. */ - pmnc = xscale2pmu_read_pmnc(); - xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); - - /* Check the overflow flag register. */ - of_flags = xscale2pmu_read_overflow_flags(); - if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) - return IRQ_NONE; - - /* Clear the overflow bits. */ - xscale2pmu_write_overflow_flags(of_flags); - - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - irq_work_run(); - - /* - * Re-enable the PMU. - */ - pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static void -xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags, ien, evtsel; - - ien = xscale2pmu_read_int_enable(); - evtsel = xscale2pmu_read_event_select(); - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - ien |= XSCALE2_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - ien |= XSCALE2_COUNT0_INT_EN; - evtsel &= ~XSCALE2_COUNT0_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - ien |= XSCALE2_COUNT1_INT_EN; - evtsel &= ~XSCALE2_COUNT1_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; - break; - case XSCALE_COUNTER2: - ien |= XSCALE2_COUNT2_INT_EN; - evtsel &= ~XSCALE2_COUNT2_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; - break; - case XSCALE_COUNTER3: - ien |= XSCALE2_COUNT3_INT_EN; - evtsel &= ~XSCALE2_COUNT3_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - xscale2pmu_write_event_select(evtsel); - xscale2pmu_write_int_enable(ien); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags, ien, evtsel; - - ien = xscale2pmu_read_int_enable(); - evtsel = xscale2pmu_read_event_select(); - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - ien &= ~XSCALE2_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - ien &= ~XSCALE2_COUNT0_INT_EN; - evtsel &= ~XSCALE2_COUNT0_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - ien &= ~XSCALE2_COUNT1_INT_EN; - evtsel &= ~XSCALE2_COUNT1_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; - break; - case XSCALE_COUNTER2: - ien &= ~XSCALE2_COUNT2_INT_EN; - evtsel &= ~XSCALE2_COUNT2_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; - break; - case XSCALE_COUNTER3: - ien &= ~XSCALE2_COUNT3_INT_EN; - evtsel &= ~XSCALE2_COUNT3_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - xscale2pmu_write_event_select(evtsel); - xscale2pmu_write_int_enable(ien); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static int -xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - int idx = xscale1pmu_get_event_idx(cpuc, event); - if (idx >= 0) - goto out; - - if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) - idx = XSCALE_COUNTER3; - else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) - idx = XSCALE_COUNTER2; -out: - return idx; -} - -static void -xscale2pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; - val |= XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale2pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale2pmu_read_pmnc(); - val &= ~XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline u32 -xscale2pmu_read_counter(int counter) -{ - u32 val = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER2: - asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER3: - asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); - break; - } - - return val; -} - -static inline void -xscale2pmu_write_counter(int counter, u32 val) -{ - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER2: - asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER3: - asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); - break; - } -} - -static const struct arm_pmu xscale2pmu = { - .id = ARM_PERF_PMU_ID_XSCALE2, - .handle_irq = xscale2pmu_handle_irq, - .enable = xscale2pmu_enable_event, - .disable = xscale2pmu_disable_event, - .event_map = xscalepmu_event_map, - .raw_event = xscalepmu_raw_event, - .read_counter = xscale2pmu_read_counter, - .write_counter = xscale2pmu_write_counter, - .get_event_idx = xscale2pmu_get_event_idx, - .start = xscale2pmu_start, - .stop = xscale2pmu_stop, - .num_events = 5, - .max_period = (1LLU << 32) - 1, -}; +/* Include the PMU-specific implementations. */ +#include "perf_event_xscale.c" +#include "perf_event_v6.c" +#include "perf_event_v7.c" static int __init init_hw_perf_events(void) @@ -2977,37 +622,16 @@ init_hw_perf_events(void) case 0xB360: /* ARM1136 */ case 0xB560: /* ARM1156 */ case 0xB760: /* ARM1176 */ - armpmu = &armv6pmu; - memcpy(armpmu_perf_cache_map, armv6_perf_cache_map, - sizeof(armv6_perf_cache_map)); + armpmu = armv6pmu_init(); break; case 0xB020: /* ARM11mpcore */ - armpmu = &armv6mpcore_pmu; - memcpy(armpmu_perf_cache_map, - armv6mpcore_perf_cache_map, - sizeof(armv6mpcore_perf_cache_map)); + armpmu = armv6mpcore_pmu_init(); break; case 0xC080: /* Cortex-A8 */ - armv7pmu.id = ARM_PERF_PMU_ID_CA8; - memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map, - sizeof(armv7_a8_perf_cache_map)); - armv7pmu.event_map = armv7_a8_pmu_event_map; - armpmu = &armv7pmu; - - /* Reset PMNC and read the nb of CNTx counters - supported */ - armv7pmu.num_events = armv7_reset_read_pmnc(); + armpmu = armv7_a8_pmu_init(); break; case 0xC090: /* Cortex-A9 */ - armv7pmu.id = ARM_PERF_PMU_ID_CA9; - memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map, - sizeof(armv7_a9_perf_cache_map)); - armv7pmu.event_map = armv7_a9_pmu_event_map; - armpmu = &armv7pmu; - - /* Reset PMNC and read the nb of CNTx counters - supported */ - armv7pmu.num_events = armv7_reset_read_pmnc(); + armpmu = armv7_a9_pmu_init(); break; } /* Intel CPUs [xscale]. */ @@ -3015,21 +639,17 @@ init_hw_perf_events(void) part_number = (cpuid >> 13) & 0x7; switch (part_number) { case 1: - armpmu = &xscale1pmu; - memcpy(armpmu_perf_cache_map, xscale_perf_cache_map, - sizeof(xscale_perf_cache_map)); + armpmu = xscale1pmu_init(); break; case 2: - armpmu = &xscale2pmu; - memcpy(armpmu_perf_cache_map, xscale_perf_cache_map, - sizeof(xscale_perf_cache_map)); + armpmu = xscale2pmu_init(); break; } } if (armpmu) { pr_info("enabled with %s PMU driver, %d counters available\n", - arm_pmu_names[armpmu->id], armpmu->num_events); + armpmu->name, armpmu->num_events); } else { pr_info("no hardware support available\n"); } @@ -3053,17 +673,17 @@ arch_initcall(init_hw_perf_events); * This code has been adapted from the ARM OProfile support. */ struct frame_tail { - struct frame_tail *fp; - unsigned long sp; - unsigned long lr; + struct frame_tail __user *fp; + unsigned long sp; + unsigned long lr; } __attribute__((packed)); /* * Get the return address for a single stackframe and return a pointer to the * next frame tail. */ -static struct frame_tail * -user_backtrace(struct frame_tail *tail, +static struct frame_tail __user * +user_backtrace(struct frame_tail __user *tail, struct perf_callchain_entry *entry) { struct frame_tail buftail; @@ -3089,10 +709,10 @@ user_backtrace(struct frame_tail *tail, void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { - struct frame_tail *tail; + struct frame_tail __user *tail; - tail = (struct frame_tail *)regs->ARM_fp - 1; + tail = (struct frame_tail __user *)regs->ARM_fp - 1; while (tail && !((unsigned long)tail & 0x3)) tail = user_backtrace(tail, entry); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c new file mode 100644 index 0000000..c058bfc --- /dev/null +++ b/arch/arm/kernel/perf_event_v6.c @@ -0,0 +1,672 @@ +/* + * ARMv6 Performance counter handling code. + * + * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles + * + * ARMv6 has 2 configurable performance counters and a single cycle counter. + * They all share a single reset bit but can be written to zero so we can use + * that for a reset. + * + * The counters can't be individually enabled or disabled so when we remove + * one event and replace it with another we could get spurious counts from the + * wrong event. However, we can take advantage of the fact that the + * performance counters can export events to the event bus, and the event bus + * itself can be monitored. This requires that we *don't* export the events to + * the event bus. The procedure for disabling a configurable counter is: + * - change the counter to count the ETMEXTOUT[0] signal (0x20). This + * effectively stops the counter from counting. + * - disable the counter's interrupt generation (each counter has it's + * own interrupt enable bit). + * Once stopped, the counter value can be written as 0 to reset. + * + * To enable a counter: + * - enable the counter's interrupt generation. + * - set the new event type. + * + * Note: the dedicated cycle counter only counts cycles and can't be + * enabled/disabled independently of the others. When we want to disable the + * cycle counter, we have to just disable the interrupt reporting and start + * ignoring that counter. When re-enabling, we have to reset the value and + * enable the interrupt. + */ + +#ifdef CONFIG_CPU_V6 +enum armv6_perf_types { + ARMV6_PERFCTR_ICACHE_MISS = 0x0, + ARMV6_PERFCTR_IBUF_STALL = 0x1, + ARMV6_PERFCTR_DDEP_STALL = 0x2, + ARMV6_PERFCTR_ITLB_MISS = 0x3, + ARMV6_PERFCTR_DTLB_MISS = 0x4, + ARMV6_PERFCTR_BR_EXEC = 0x5, + ARMV6_PERFCTR_BR_MISPREDICT = 0x6, + ARMV6_PERFCTR_INSTR_EXEC = 0x7, + ARMV6_PERFCTR_DCACHE_HIT = 0x9, + ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, + ARMV6_PERFCTR_DCACHE_MISS = 0xB, + ARMV6_PERFCTR_DCACHE_WBACK = 0xC, + ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, + ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, + ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, + ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, + ARMV6_PERFCTR_WBUF_DRAINED = 0x12, + ARMV6_PERFCTR_CPU_CYCLES = 0xFF, + ARMV6_PERFCTR_NOP = 0x20, +}; + +enum armv6_counters { + ARMV6_CYCLE_COUNTER = 1, + ARMV6_COUNTER0, + ARMV6_COUNTER1, +}; + +/* + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * The ARM performance counters can count micro DTLB misses, + * micro ITLB misses and main TLB misses. There isn't an event + * for TLB misses, so use the micro misses here and if users + * want the main TLB misses they can use a raw counter. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +enum armv6mpcore_perf_types { + ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0, + ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1, + ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2, + ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3, + ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4, + ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5, + ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6, + ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7, + ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8, + ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA, + ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB, + ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC, + ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD, + ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE, + ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF, + ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10, + ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11, + ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12, + ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13, + ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF, +}; + +/* + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = + ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, + [C(RESULT_MISS)] = + ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = + ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, + [C(RESULT_MISS)] = + ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * The ARM performance counters can count micro DTLB misses, + * micro ITLB misses and main TLB misses. There isn't an event + * for TLB misses, so use the micro misses here and if users + * want the main TLB misses they can use a raw counter. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +static inline unsigned long +armv6_pmcr_read(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); + return val; +} + +static inline void +armv6_pmcr_write(unsigned long val) +{ + asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); +} + +#define ARMV6_PMCR_ENABLE (1 << 0) +#define ARMV6_PMCR_CTR01_RESET (1 << 1) +#define ARMV6_PMCR_CCOUNT_RESET (1 << 2) +#define ARMV6_PMCR_CCOUNT_DIV (1 << 3) +#define ARMV6_PMCR_COUNT0_IEN (1 << 4) +#define ARMV6_PMCR_COUNT1_IEN (1 << 5) +#define ARMV6_PMCR_CCOUNT_IEN (1 << 6) +#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) +#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) +#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) +#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 +#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) +#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 +#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) + +#define ARMV6_PMCR_OVERFLOWED_MASK \ + (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ + ARMV6_PMCR_CCOUNT_OVERFLOW) + +static inline int +armv6_pmcr_has_overflowed(unsigned long pmcr) +{ + return pmcr & ARMV6_PMCR_OVERFLOWED_MASK; +} + +static inline int +armv6_pmcr_counter_has_overflowed(unsigned long pmcr, + enum armv6_counters counter) +{ + int ret = 0; + + if (ARMV6_CYCLE_COUNTER == counter) + ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; + else if (ARMV6_COUNTER0 == counter) + ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; + else if (ARMV6_COUNTER1 == counter) + ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + + return ret; +} + +static inline u32 +armv6pmu_read_counter(int counter) +{ + unsigned long value = 0; + + if (ARMV6_CYCLE_COUNTER == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); + else if (ARMV6_COUNTER0 == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); + else if (ARMV6_COUNTER1 == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + + return value; +} + +static inline void +armv6pmu_write_counter(int counter, + u32 value) +{ + if (ARMV6_CYCLE_COUNTER == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); + else if (ARMV6_COUNTER0 == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); + else if (ARMV6_COUNTER1 == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); +} + +static void +armv6pmu_enable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, evt, flags; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = 0; + evt = ARMV6_PMCR_CCOUNT_IEN; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_EVT_COUNT0_MASK; + evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | + ARMV6_PMCR_COUNT0_IEN; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_EVT_COUNT1_MASK; + evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | + ARMV6_PMCR_COUNT1_IEN; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Mask out the current event and set the counter to count the event + * that we're interested in. + */ + raw_spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static irqreturn_t +armv6pmu_handle_irq(int irq_num, + void *dev) +{ + unsigned long pmcr = armv6_pmcr_read(); + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + if (!armv6_pmcr_has_overflowed(pmcr)) + return IRQ_NONE; + + regs = get_irq_regs(); + + /* + * The interrupts are cleared by writing the overflow flags back to + * the control register. All of the other bits don't have any effect + * if they are rewritten, so write the whole value back. + */ + armv6_pmcr_write(pmcr); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + /* + * We have a single interrupt for all counters. Check that + * each counter has overflowed before we process it. + */ + if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + /* + * Handle the pending perf events. + * + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this + * will not work. + */ + irq_work_run(); + + return IRQ_HANDLED; +} + +static void +armv6pmu_start(void) +{ + unsigned long flags, val; + + raw_spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val |= ARMV6_PMCR_ENABLE; + armv6_pmcr_write(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +armv6pmu_stop(void) +{ + unsigned long flags, val; + + raw_spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~ARMV6_PMCR_ENABLE; + armv6_pmcr_write(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + /* Always place a cycle counter into the cycle counter. */ + if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { + if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return ARMV6_CYCLE_COUNTER; + } else { + /* + * For anything other than a cycle counter, try and use + * counter0 and counter1. + */ + if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) + return ARMV6_COUNTER1; + + if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) + return ARMV6_COUNTER0; + + /* The counters are all in use. */ + return -EAGAIN; + } +} + +static void +armv6pmu_disable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, evt, flags; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = ARMV6_PMCR_CCOUNT_IEN; + evt = 0; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; + evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; + evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Mask out the current event and set the counter to count the number + * of ETM bus signal assertion cycles. The external reporting should + * be disabled and so this should never increment. + */ + raw_spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, flags, evt = 0; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = ARMV6_PMCR_CCOUNT_IEN; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_COUNT0_IEN; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_COUNT1_IEN; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Unlike UP ARMv6, we don't have a way of stopping the counters. We + * simply disable the interrupt reporting. + */ + raw_spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static const struct arm_pmu armv6pmu = { + .id = ARM_PERF_PMU_ID_V6, + .name = "v6", + .handle_irq = armv6pmu_handle_irq, + .enable = armv6pmu_enable_event, + .disable = armv6pmu_disable_event, + .read_counter = armv6pmu_read_counter, + .write_counter = armv6pmu_write_counter, + .get_event_idx = armv6pmu_get_event_idx, + .start = armv6pmu_start, + .stop = armv6pmu_stop, + .cache_map = &armv6_perf_cache_map, + .event_map = &armv6_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +static const struct arm_pmu *__init armv6pmu_init(void) +{ + return &armv6pmu; +} + +/* + * ARMv6mpcore is almost identical to single core ARMv6 with the exception + * that some of the events have different enumerations and that there is no + * *hack* to stop the programmable counters. To stop the counters we simply + * disable the interrupt reporting and update the event. When unthrottling we + * reset the period and enable the interrupt reporting. + */ +static const struct arm_pmu armv6mpcore_pmu = { + .id = ARM_PERF_PMU_ID_V6MP, + .name = "v6mpcore", + .handle_irq = armv6pmu_handle_irq, + .enable = armv6pmu_enable_event, + .disable = armv6mpcore_pmu_disable_event, + .read_counter = armv6pmu_read_counter, + .write_counter = armv6pmu_write_counter, + .get_event_idx = armv6pmu_get_event_idx, + .start = armv6pmu_start, + .stop = armv6pmu_stop, + .cache_map = &armv6mpcore_perf_cache_map, + .event_map = &armv6mpcore_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +static const struct arm_pmu *__init armv6mpcore_pmu_init(void) +{ + return &armv6mpcore_pmu; +} +#else +static const struct arm_pmu *__init armv6pmu_init(void) +{ + return NULL; +} + +static const struct arm_pmu *__init armv6mpcore_pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_V6 */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c new file mode 100644 index 0000000..2e14025 --- /dev/null +++ b/arch/arm/kernel/perf_event_v7.c @@ -0,0 +1,906 @@ +/* + * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code. + * + * ARMv7 support: Jean Pihet <jpihet@mvista.com> + * 2010 (c) MontaVista Software, LLC. + * + * Copied from ARMv6 code, with the low level code inspired + * by the ARMv7 Oprofile code. + * + * Cortex-A8 has up to 4 configurable performance counters and + * a single cycle counter. + * Cortex-A9 has up to 31 configurable performance counters and + * a single cycle counter. + * + * All counters can be enabled/disabled and IRQ masked separately. The cycle + * counter and all 4 performance counters together can be reset separately. + */ + +#ifdef CONFIG_CPU_V7 +/* Common ARMv7 event types */ +enum armv7_perf_types { + ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, + ARMV7_PERFCTR_IFETCH_MISS = 0x01, + ARMV7_PERFCTR_ITLB_MISS = 0x02, + ARMV7_PERFCTR_DCACHE_REFILL = 0x03, + ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, + ARMV7_PERFCTR_DTLB_REFILL = 0x05, + ARMV7_PERFCTR_DREAD = 0x06, + ARMV7_PERFCTR_DWRITE = 0x07, + + ARMV7_PERFCTR_EXC_TAKEN = 0x09, + ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, + ARMV7_PERFCTR_CID_WRITE = 0x0B, + /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. + * It counts: + * - all branch instructions, + * - instructions that explicitly write the PC, + * - exception generating instructions. + */ + ARMV7_PERFCTR_PC_WRITE = 0x0C, + ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, + ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, + ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, + ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, + + ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12, + + ARMV7_PERFCTR_CPU_CYCLES = 0xFF +}; + +/* ARMv7 Cortex-A8 specific event types */ +enum armv7_a8_perf_types { + ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, + + ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, + + ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, + ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, + ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, + ARMV7_PERFCTR_L2_ACCESS = 0x43, + ARMV7_PERFCTR_L2_CACH_MISS = 0x44, + ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45, + ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46, + ARMV7_PERFCTR_MEMORY_REPLAY = 0x47, + ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48, + ARMV7_PERFCTR_L1_DATA_MISS = 0x49, + ARMV7_PERFCTR_L1_INST_MISS = 0x4A, + ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B, + ARMV7_PERFCTR_L1_NEON_DATA = 0x4C, + ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D, + ARMV7_PERFCTR_L2_NEON = 0x4E, + ARMV7_PERFCTR_L2_NEON_HIT = 0x4F, + ARMV7_PERFCTR_L1_INST = 0x50, + ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51, + ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52, + ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53, + ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54, + ARMV7_PERFCTR_OP_EXECUTED = 0x55, + ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56, + ARMV7_PERFCTR_CYCLES_INST = 0x57, + ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58, + ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59, + ARMV7_PERFCTR_NEON_CYCLES = 0x5A, + + ARMV7_PERFCTR_PMU0_EVENTS = 0x70, + ARMV7_PERFCTR_PMU1_EVENTS = 0x71, + ARMV7_PERFCTR_PMU_EVENTS = 0x72, +}; + +/* ARMv7 Cortex-A9 specific event types */ +enum armv7_a9_perf_types { + ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40, + ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41, + ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42, + + ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50, + ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51, + + ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60, + ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61, + ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62, + ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63, + ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64, + ARMV7_PERFCTR_DATA_EVICTION = 0x65, + ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66, + ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67, + ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68, + + ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E, + + ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70, + ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71, + ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72, + ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73, + ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74, + + ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80, + ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81, + ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82, + ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83, + ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84, + ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85, + ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86, + + ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A, + ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B, + + ARMV7_PERFCTR_ISB_INST = 0x90, + ARMV7_PERFCTR_DSB_INST = 0x91, + ARMV7_PERFCTR_DMB_INST = 0x92, + ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93, + + ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0, + ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1, + ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2, + ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3, + ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4, + ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 +}; + +/* + * Cortex-A8 HW events mapping + * + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, +}; + +static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * Only ITLB misses and DTLB refills are supported. + * If users want the DTLB refills misses a raw counter + * must be used. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* + * Cortex-A9 HW events mapping + */ +static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = + ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, +}; + +static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * Only ITLB misses and DTLB refills are supported. + * If users want the DTLB refills misses a raw counter + * must be used. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* + * Perf Events counters + */ +enum armv7_counters { + ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ + ARMV7_COUNTER0 = 2, /* First event counter */ +}; + +/* + * The cycle counter is ARMV7_CYCLE_COUNTER. + * The first event counter is ARMV7_COUNTER0. + * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). + */ +#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) + +/* + * ARMv7 low level PMNC access + */ + +/* + * Per-CPU PMNC: config reg + */ +#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ +#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ +#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ +#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ +#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ +#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ +#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ +#define ARMV7_PMNC_N_MASK 0x1f +#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ + +/* + * Available counters + */ +#define ARMV7_CNT0 0 /* First event counter */ +#define ARMV7_CCNT 31 /* Cycle counter */ + +/* Perf Event to low level counters mapping */ +#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) + +/* + * CNTENS: counters enable reg + */ +#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_CNTENS_C (1 << ARMV7_CCNT) + +/* + * CNTENC: counters disable reg + */ +#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_CNTENC_C (1 << ARMV7_CCNT) + +/* + * INTENS: counters overflow interrupt enable reg + */ +#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_INTENS_C (1 << ARMV7_CCNT) + +/* + * INTENC: counters overflow interrupt disable reg + */ +#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_INTENC_C (1 << ARMV7_CCNT) + +/* + * EVTSEL: Event selection reg + */ +#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ + +/* + * SELECT: Counter selection reg + */ +#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ + +/* + * FLAG: counters overflow flag status reg + */ +#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_FLAG_C (1 << ARMV7_CCNT) +#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ +#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK + +static inline unsigned long armv7_pmnc_read(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); + return val; +} + +static inline void armv7_pmnc_write(unsigned long val) +{ + val &= ARMV7_PMNC_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); +} + +static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) +{ + return pmnc & ARMV7_OVERFLOWED_MASK; +} + +static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, + enum armv7_counters counter) +{ + int ret = 0; + + if (counter == ARMV7_CYCLE_COUNTER) + ret = pmnc & ARMV7_FLAG_C; + else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) + ret = pmnc & ARMV7_FLAG_P(counter); + else + pr_err("CPU%u checking wrong counter %d overflow status\n", + smp_processor_id(), counter); + + return ret; +} + +static inline int armv7_pmnc_select_counter(unsigned int idx) +{ + u32 val; + + if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { + pr_err("CPU%u selecting wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); + + return idx; +} + +static inline u32 armv7pmu_read_counter(int idx) +{ + unsigned long value = 0; + + if (idx == ARMV7_CYCLE_COUNTER) + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); + else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { + if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mrc p15, 0, %0, c9, c13, 2" + : "=r" (value)); + } else + pr_err("CPU%u reading wrong counter %d\n", + smp_processor_id(), idx); + + return value; +} + +static inline void armv7pmu_write_counter(int idx, u32 value) +{ + if (idx == ARMV7_CYCLE_COUNTER) + asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); + else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { + if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mcr p15, 0, %0, c9, c13, 2" + : : "r" (value)); + } else + pr_err("CPU%u writing wrong counter %d\n", + smp_processor_id(), idx); +} + +static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) +{ + if (armv7_pmnc_select_counter(idx) == idx) { + val &= ARMV7_EVTSEL_MASK; + asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); + } +} + +static inline u32 armv7_pmnc_enable_counter(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u enabling wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_CNTENS_C; + else + val = ARMV7_CNTENS_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_disable_counter(unsigned int idx) +{ + u32 val; + + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u disabling wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_CNTENC_C; + else + val = ARMV7_CNTENC_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_enable_intens(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u enabling wrong PMNC counter" + " interrupt enable %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_INTENS_C; + else + val = ARMV7_INTENS_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_disable_intens(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u disabling wrong PMNC counter" + " interrupt enable %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_INTENC_C; + else + val = ARMV7_INTENC_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_getreset_flags(void) +{ + u32 val; + + /* Read */ + asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); + + /* Write to clear flags */ + val &= ARMV7_FLAG_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); + + return val; +} + +#ifdef DEBUG +static void armv7_pmnc_dump_regs(void) +{ + u32 val; + unsigned int cnt; + + printk(KERN_INFO "PMNC registers dump:\n"); + + asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); + printk(KERN_INFO "PMNC =0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); + printk(KERN_INFO "CNTENS=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); + printk(KERN_INFO "INTENS=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); + printk(KERN_INFO "FLAGS =0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); + printk(KERN_INFO "SELECT=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); + printk(KERN_INFO "CCNT =0x%08x\n", val); + + for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { + armv7_pmnc_select_counter(cnt); + asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); + printk(KERN_INFO "CNT[%d] count =0x%08x\n", + cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); + printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", + cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + } +} +#endif + +static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags; + + /* + * Enable counter and interrupt, and set the counter to count + * the event that we're interested in. + */ + raw_spin_lock_irqsave(&pmu_lock, flags); + + /* + * Disable counter + */ + armv7_pmnc_disable_counter(idx); + + /* + * Set event (if destined for PMNx counters) + * We don't need to set the event if it's a cycle count + */ + if (idx != ARMV7_CYCLE_COUNTER) + armv7_pmnc_write_evtsel(idx, hwc->config_base); + + /* + * Enable interrupt for this counter + */ + armv7_pmnc_enable_intens(idx); + + /* + * Enable counter + */ + armv7_pmnc_enable_counter(idx); + + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags; + + /* + * Disable counter and interrupt + */ + raw_spin_lock_irqsave(&pmu_lock, flags); + + /* + * Disable counter + */ + armv7_pmnc_disable_counter(idx); + + /* + * Disable interrupt for this counter + */ + armv7_pmnc_disable_intens(idx); + + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* + * Get and reset the IRQ flags + */ + pmnc = armv7_pmnc_getreset_flags(); + + /* + * Did an overflow occur? + */ + if (!armv7_pmnc_has_overflowed(pmnc)) + return IRQ_NONE; + + /* + * Handle the counter(s) overflow(s) + */ + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + /* + * We have a single interrupt for all counters. Check that + * each counter has overflowed before we process it. + */ + if (!armv7_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + /* + * Handle the pending perf events. + * + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this + * will not work. + */ + irq_work_run(); + + return IRQ_HANDLED; +} + +static void armv7pmu_start(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&pmu_lock, flags); + /* Enable all counters */ + armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void armv7pmu_stop(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&pmu_lock, flags); + /* Disable all counters */ + armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + int idx; + + /* Always place a cycle counter into the cycle counter. */ + if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { + if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return ARMV7_CYCLE_COUNTER; + } else { + /* + * For anything other than a cycle counter, try and use + * the events counters + */ + for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { + if (!test_and_set_bit(idx, cpuc->used_mask)) + return idx; + } + + /* The counters are all in use. */ + return -EAGAIN; + } +} + +static struct arm_pmu armv7pmu = { + .handle_irq = armv7pmu_handle_irq, + .enable = armv7pmu_enable_event, + .disable = armv7pmu_disable_event, + .read_counter = armv7pmu_read_counter, + .write_counter = armv7pmu_write_counter, + .get_event_idx = armv7pmu_get_event_idx, + .start = armv7pmu_start, + .stop = armv7pmu_stop, + .raw_event_mask = 0xFF, + .max_period = (1LLU << 32) - 1, +}; + +static u32 __init armv7_reset_read_pmnc(void) +{ + u32 nb_cnt; + + /* Initialize & Reset PMNC: C and P bits */ + armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); + + /* Read the nb of CNTx counters supported from PMNC */ + nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; + + /* Add the CPU cycles counter and return */ + return nb_cnt + 1; +} + +static const struct arm_pmu *__init armv7_a8_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA8; + armv7pmu.name = "ARMv7 Cortex-A8"; + armv7pmu.cache_map = &armv7_a8_perf_cache_map; + armv7pmu.event_map = &armv7_a8_perf_map; + armv7pmu.num_events = armv7_reset_read_pmnc(); + return &armv7pmu; +} + +static const struct arm_pmu *__init armv7_a9_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA9; + armv7pmu.name = "ARMv7 Cortex-A9"; + armv7pmu.cache_map = &armv7_a9_perf_cache_map; + armv7pmu.event_map = &armv7_a9_perf_map; + armv7pmu.num_events = armv7_reset_read_pmnc(); + return &armv7pmu; +} +#else +static const struct arm_pmu *__init armv7_a8_pmu_init(void) +{ + return NULL; +} + +static const struct arm_pmu *__init armv7_a9_pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c new file mode 100644 index 0000000..28cd3b0 --- /dev/null +++ b/arch/arm/kernel/perf_event_xscale.c @@ -0,0 +1,807 @@ +/* + * ARMv5 [xscale] Performance counter handling code. + * + * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com> + * + * Based on the previous xscale OProfile code. + * + * There are two variants of the xscale PMU that we support: + * - xscale1pmu: 2 event counters and a cycle counter + * - xscale2pmu: 4 event counters and a cycle counter + * The two variants share event definitions, but have different + * PMU structures. + */ + +#ifdef CONFIG_CPU_XSCALE +enum xscale_perf_types { + XSCALE_PERFCTR_ICACHE_MISS = 0x00, + XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, + XSCALE_PERFCTR_DATA_STALL = 0x02, + XSCALE_PERFCTR_ITLB_MISS = 0x03, + XSCALE_PERFCTR_DTLB_MISS = 0x04, + XSCALE_PERFCTR_BRANCH = 0x05, + XSCALE_PERFCTR_BRANCH_MISS = 0x06, + XSCALE_PERFCTR_INSTRUCTION = 0x07, + XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, + XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, + XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, + XSCALE_PERFCTR_DCACHE_MISS = 0x0B, + XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, + XSCALE_PERFCTR_PC_CHANGED = 0x0D, + XSCALE_PERFCTR_BCU_REQUEST = 0x10, + XSCALE_PERFCTR_BCU_FULL = 0x11, + XSCALE_PERFCTR_BCU_DRAIN = 0x12, + XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, + XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, + XSCALE_PERFCTR_RMW = 0x16, + /* XSCALE_PERFCTR_CCNT is not hardware defined */ + XSCALE_PERFCTR_CCNT = 0xFE, + XSCALE_PERFCTR_UNUSED = 0xFF, +}; + +enum xscale_counters { + XSCALE_CYCLE_COUNTER = 1, + XSCALE_COUNTER0, + XSCALE_COUNTER1, + XSCALE_COUNTER2, + XSCALE_COUNTER3, +}; + +static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, + [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, + [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +#define XSCALE_PMU_ENABLE 0x001 +#define XSCALE_PMN_RESET 0x002 +#define XSCALE_CCNT_RESET 0x004 +#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) +#define XSCALE_PMU_CNT64 0x008 + +#define XSCALE1_OVERFLOWED_MASK 0x700 +#define XSCALE1_CCOUNT_OVERFLOW 0x400 +#define XSCALE1_COUNT0_OVERFLOW 0x100 +#define XSCALE1_COUNT1_OVERFLOW 0x200 +#define XSCALE1_CCOUNT_INT_EN 0x040 +#define XSCALE1_COUNT0_INT_EN 0x010 +#define XSCALE1_COUNT1_INT_EN 0x020 +#define XSCALE1_COUNT0_EVT_SHFT 12 +#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) +#define XSCALE1_COUNT1_EVT_SHFT 20 +#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) + +static inline u32 +xscale1pmu_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); + return val; +} + +static inline void +xscale1pmu_write_pmnc(u32 val) +{ + /* upper 4bits and 7, 11 are write-as-0 */ + val &= 0xffff77f; + asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); +} + +static inline int +xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, + enum xscale_counters counter) +{ + int ret = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; + break; + case XSCALE_COUNTER0: + ret = pmnc & XSCALE1_COUNT0_OVERFLOW; + break; + case XSCALE_COUNTER1: + ret = pmnc & XSCALE1_COUNT1_OVERFLOW; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + } + + return ret; +} + +static irqreturn_t +xscale1pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* + * NOTE: there's an A stepping erratum that states if an overflow + * bit already exists and another occurs, the previous + * Overflow bit gets cleared. There's no workaround. + * Fixed in B stepping or later. + */ + pmnc = xscale1pmu_read_pmnc(); + + /* + * Write the value back to clear the overflow flags. Overflow + * flags remain in pmnc for use below. We also disable the PMU + * while we process the interrupt. + */ + xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); + + if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) + return IRQ_NONE; + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + irq_work_run(); + + /* + * Re-enable the PMU. + */ + pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(pmnc); + + return IRQ_HANDLED; +} + +static void +xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long val, mask, evt, flags; + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + mask = 0; + evt = XSCALE1_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + mask = XSCALE1_COUNT0_EVT_MASK; + evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | + XSCALE1_COUNT0_INT_EN; + break; + case XSCALE_COUNTER1: + mask = XSCALE1_COUNT1_EVT_MASK; + evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | + XSCALE1_COUNT1_INT_EN; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + raw_spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~mask; + val |= evt; + xscale1pmu_write_pmnc(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long val, mask, evt, flags; + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + mask = XSCALE1_CCOUNT_INT_EN; + evt = 0; + break; + case XSCALE_COUNTER0: + mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; + evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; + evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + raw_spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~mask; + val |= evt; + xscale1pmu_write_pmnc(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + if (XSCALE_PERFCTR_CCNT == event->config_base) { + if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return XSCALE_CYCLE_COUNTER; + } else { + if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) + return XSCALE_COUNTER1; + + if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) + return XSCALE_COUNTER0; + + return -EAGAIN; + } +} + +static void +xscale1pmu_start(void) +{ + unsigned long flags, val; + + raw_spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val |= XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale1pmu_stop(void) +{ + unsigned long flags, val; + + raw_spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static inline u32 +xscale1pmu_read_counter(int counter) +{ + u32 val = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); + break; + } + + return val; +} + +static inline void +xscale1pmu_write_counter(int counter, u32 val) +{ + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); + break; + } +} + +static const struct arm_pmu xscale1pmu = { + .id = ARM_PERF_PMU_ID_XSCALE1, + .name = "xscale1", + .handle_irq = xscale1pmu_handle_irq, + .enable = xscale1pmu_enable_event, + .disable = xscale1pmu_disable_event, + .read_counter = xscale1pmu_read_counter, + .write_counter = xscale1pmu_write_counter, + .get_event_idx = xscale1pmu_get_event_idx, + .start = xscale1pmu_start, + .stop = xscale1pmu_stop, + .cache_map = &xscale_perf_cache_map, + .event_map = &xscale_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +static const struct arm_pmu *__init xscale1pmu_init(void) +{ + return &xscale1pmu; +} + +#define XSCALE2_OVERFLOWED_MASK 0x01f +#define XSCALE2_CCOUNT_OVERFLOW 0x001 +#define XSCALE2_COUNT0_OVERFLOW 0x002 +#define XSCALE2_COUNT1_OVERFLOW 0x004 +#define XSCALE2_COUNT2_OVERFLOW 0x008 +#define XSCALE2_COUNT3_OVERFLOW 0x010 +#define XSCALE2_CCOUNT_INT_EN 0x001 +#define XSCALE2_COUNT0_INT_EN 0x002 +#define XSCALE2_COUNT1_INT_EN 0x004 +#define XSCALE2_COUNT2_INT_EN 0x008 +#define XSCALE2_COUNT3_INT_EN 0x010 +#define XSCALE2_COUNT0_EVT_SHFT 0 +#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) +#define XSCALE2_COUNT1_EVT_SHFT 8 +#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) +#define XSCALE2_COUNT2_EVT_SHFT 16 +#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) +#define XSCALE2_COUNT3_EVT_SHFT 24 +#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) + +static inline u32 +xscale2pmu_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); + /* bits 1-2 and 4-23 are read-unpredictable */ + return val & 0xff000009; +} + +static inline void +xscale2pmu_write_pmnc(u32 val) +{ + /* bits 4-23 are write-as-0, 24-31 are write ignored */ + val &= 0xf; + asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); +} + +static inline u32 +xscale2pmu_read_overflow_flags(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); + return val; +} + +static inline void +xscale2pmu_write_overflow_flags(u32 val) +{ + asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); +} + +static inline u32 +xscale2pmu_read_event_select(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); + return val; +} + +static inline void +xscale2pmu_write_event_select(u32 val) +{ + asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); +} + +static inline u32 +xscale2pmu_read_int_enable(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); + return val; +} + +static void +xscale2pmu_write_int_enable(u32 val) +{ + asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); +} + +static inline int +xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, + enum xscale_counters counter) +{ + int ret = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; + break; + case XSCALE_COUNTER0: + ret = of_flags & XSCALE2_COUNT0_OVERFLOW; + break; + case XSCALE_COUNTER1: + ret = of_flags & XSCALE2_COUNT1_OVERFLOW; + break; + case XSCALE_COUNTER2: + ret = of_flags & XSCALE2_COUNT2_OVERFLOW; + break; + case XSCALE_COUNTER3: + ret = of_flags & XSCALE2_COUNT3_OVERFLOW; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + } + + return ret; +} + +static irqreturn_t +xscale2pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc, of_flags; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* Disable the PMU. */ + pmnc = xscale2pmu_read_pmnc(); + xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); + + /* Check the overflow flag register. */ + of_flags = xscale2pmu_read_overflow_flags(); + if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) + return IRQ_NONE; + + /* Clear the overflow bits. */ + xscale2pmu_write_overflow_flags(of_flags); + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + irq_work_run(); + + /* + * Re-enable the PMU. + */ + pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(pmnc); + + return IRQ_HANDLED; +} + +static void +xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags, ien, evtsel; + + ien = xscale2pmu_read_int_enable(); + evtsel = xscale2pmu_read_event_select(); + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + ien |= XSCALE2_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + ien |= XSCALE2_COUNT0_INT_EN; + evtsel &= ~XSCALE2_COUNT0_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + ien |= XSCALE2_COUNT1_INT_EN; + evtsel &= ~XSCALE2_COUNT1_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; + break; + case XSCALE_COUNTER2: + ien |= XSCALE2_COUNT2_INT_EN; + evtsel &= ~XSCALE2_COUNT2_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; + break; + case XSCALE_COUNTER3: + ien |= XSCALE2_COUNT3_INT_EN; + evtsel &= ~XSCALE2_COUNT3_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + raw_spin_lock_irqsave(&pmu_lock, flags); + xscale2pmu_write_event_select(evtsel); + xscale2pmu_write_int_enable(ien); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags, ien, evtsel; + + ien = xscale2pmu_read_int_enable(); + evtsel = xscale2pmu_read_event_select(); + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + ien &= ~XSCALE2_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + ien &= ~XSCALE2_COUNT0_INT_EN; + evtsel &= ~XSCALE2_COUNT0_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + ien &= ~XSCALE2_COUNT1_INT_EN; + evtsel &= ~XSCALE2_COUNT1_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + break; + case XSCALE_COUNTER2: + ien &= ~XSCALE2_COUNT2_INT_EN; + evtsel &= ~XSCALE2_COUNT2_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + break; + case XSCALE_COUNTER3: + ien &= ~XSCALE2_COUNT3_INT_EN; + evtsel &= ~XSCALE2_COUNT3_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + raw_spin_lock_irqsave(&pmu_lock, flags); + xscale2pmu_write_event_select(evtsel); + xscale2pmu_write_int_enable(ien); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + int idx = xscale1pmu_get_event_idx(cpuc, event); + if (idx >= 0) + goto out; + + if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) + idx = XSCALE_COUNTER3; + else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) + idx = XSCALE_COUNTER2; +out: + return idx; +} + +static void +xscale2pmu_start(void) +{ + unsigned long flags, val; + + raw_spin_lock_irqsave(&pmu_lock, flags); + val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; + val |= XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale2pmu_stop(void) +{ + unsigned long flags, val; + + raw_spin_lock_irqsave(&pmu_lock, flags); + val = xscale2pmu_read_pmnc(); + val &= ~XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(val); + raw_spin_unlock_irqrestore(&pmu_lock, flags); +} + +static inline u32 +xscale2pmu_read_counter(int counter) +{ + u32 val = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER2: + asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER3: + asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); + break; + } + + return val; +} + +static inline void +xscale2pmu_write_counter(int counter, u32 val) +{ + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER2: + asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER3: + asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); + break; + } +} + +static const struct arm_pmu xscale2pmu = { + .id = ARM_PERF_PMU_ID_XSCALE2, + .name = "xscale2", + .handle_irq = xscale2pmu_handle_irq, + .enable = xscale2pmu_enable_event, + .disable = xscale2pmu_disable_event, + .read_counter = xscale2pmu_read_counter, + .write_counter = xscale2pmu_write_counter, + .get_event_idx = xscale2pmu_get_event_idx, + .start = xscale2pmu_start, + .stop = xscale2pmu_stop, + .cache_map = &xscale_perf_cache_map, + .event_map = &xscale_perf_map, + .raw_event_mask = 0xFF, + .num_events = 5, + .max_period = (1LLU << 32) - 1, +}; + +static const struct arm_pmu *__init xscale2pmu_init(void) +{ + return &xscale2pmu; +} +#else +static const struct arm_pmu *__init xscale1pmu_init(void) +{ + return NULL; +} + +static const struct arm_pmu *__init xscale2pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_XSCALE */ diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 3e97483..19c6816 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -1060,8 +1060,8 @@ static int ptrace_sethbpregs(struct task_struct *tsk, long num, goto out; if ((gen_type & implied_type) != gen_type) { - ret = -EINVAL; - goto out; + ret = -EINVAL; + goto out; } attr.bp_len = gen_len; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8c19595..bbca898 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -16,6 +16,7 @@ #include <linux/cache.h> #include <linux/profile.h> #include <linux/errno.h> +#include <linux/ftrace.h> #include <linux/mm.h> #include <linux/err.h> #include <linux/cpu.h> @@ -457,7 +458,7 @@ static void ipi_timer(void) } #ifdef CONFIG_LOCAL_TIMERS -asmlinkage void __exception do_local_timer(struct pt_regs *regs) +asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); int cpu = smp_processor_id(); @@ -544,7 +545,7 @@ static void ipi_cpu_stop(unsigned int cpu) * * Bit 0 - Inter-processor function call */ -asmlinkage void __exception do_IPI(struct pt_regs *regs) +asmlinkage void __exception_irq_entry do_IPI(struct pt_regs *regs) { unsigned int cpu = smp_processor_id(); struct ipi_data *ipi = &per_cpu(ipi_data, cpu); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index cead889..897c1a8 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -101,6 +101,7 @@ SECTIONS __exception_text_start = .; *(.exception.text) __exception_text_end = .; + IRQENTRY_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index 3b9a32a..a4ed390 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -9,6 +9,12 @@ config MACH_DOVE_DB Say 'Y' here if you want your kernel to support the Marvell DB-MV88AP510 Development Board. + config MACH_CM_A510 + bool "CompuLab CM-A510 Board" + help + Say 'Y' here if you want your kernel to support the + CompuLab CM-A510 Board. + endmenu endif diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index 7ab3be5..fa0f018 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,3 +1,4 @@ -obj-y += common.o addr-map.o irq.o pcie.o +obj-y += common.o addr-map.o irq.o pcie.o mpp.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o +obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c new file mode 100644 index 0000000..96e0e94 --- /dev/null +++ b/arch/arm/mach-dove/cm-a510.c @@ -0,0 +1,95 @@ +/* + * arch/arm/mach-dove/cm-a510.c + * + * Copyright (C) 2010 CompuLab, Ltd. + * Konstantin Sinyuk <kostyas@compulab.co.il> + * + * Based on Marvell DB-MV88AP510-BP Development Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/dove.h> + +#include "common.h" + +static struct mv643xx_eth_platform_data cm_a510_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, +}; + +static struct mv_sata_platform_data cm_a510_sata_data = { + .n_ports = 1, +}; + +/* + * SPI Devices: + * SPI0: 1M Flash Winbond w25q32bv + */ +static const struct flash_platform_data cm_a510_spi_flash_data = { + .type = "w25q32bv", +}; + +static struct spi_board_info __initdata cm_a510_spi_flash_info[] = { + { + .modalias = "m25p80", + .platform_data = &cm_a510_spi_flash_data, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static int __init cm_a510_pci_init(void) +{ + if (machine_is_cm_a510()) + dove_pcie_init(1, 1); + + return 0; +} + +subsys_initcall(cm_a510_pci_init); + +/* Board Init */ +static void __init cm_a510_init(void) +{ + /* + * Basic Dove setup. Needs to be called early. + */ + dove_init(); + + dove_ge00_init(&cm_a510_ge00_data); + dove_ehci0_init(); + dove_ehci1_init(); + dove_sata_init(&cm_a510_sata_data); + dove_sdio0_init(); + dove_sdio1_init(); + dove_spi0_init(); + dove_spi1_init(); + dove_uart0_init(); + dove_uart1_init(); + dove_i2c_init(); + spi_register_board_info(cm_a510_spi_flash_info, + ARRAY_SIZE(cm_a510_spi_flash_info)); +} + +MACHINE_START(CM_A510, "Compulab CM-A510 Board") + .boot_params = 0x00000100, + .init_machine = cm_a510_init, + .map_io = dove_map_io, + .init_irq = dove_init_irq, + .timer = &dove_timer, +MACHINE_END diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index f6a0839..27b4145 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -131,14 +131,21 @@ #define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014) #define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018) #define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) +#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400) #define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) #define DOVE_NAND_GPIO_EN (1 << 0) #define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40) - +#define DOVE_SPI_GPIO_SEL (1 << 5) +#define DOVE_UART1_GPIO_SEL (1 << 4) +#define DOVE_AU1_GPIO_SEL (1 << 3) +#define DOVE_CAM_GPIO_SEL (1 << 2) +#define DOVE_SD1_GPIO_SEL (1 << 1) +#define DOVE_SD0_GPIO_SEL (1 << 0) /* Power Management */ #define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000) +#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c) /* Real Time Clock */ #define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500) diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h index 0ee70ff..340bb7a 100644 --- a/arch/arm/mach-dove/include/mach/gpio.h +++ b/arch/arm/mach-dove/include/mach/gpio.h @@ -14,12 +14,14 @@ #include <plat/gpio.h> #include <asm-generic/gpio.h> /* cansleep wrappers */ -#define GPIO_MAX 64 +#define GPIO_MAX 72 #define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00) #define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20) -#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI) +#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : \ + ((pin < 64) ? GPIO_BASE_HI : \ + DOVE_GPIO2_VIRT_BASE)) #define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00) #define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04) diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c new file mode 100644 index 0000000..71db2bd --- /dev/null +++ b/arch/arm/mach-dove/mpp.c @@ -0,0 +1,212 @@ +/* + * arch/arm/mach-dove/mpp.c + * + * MPP functions for Marvell Dove SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/dove.h> + +#include "mpp.h" + +#define MPP_NR_REGS 4 +#define MPP_CTRL(i) ((i) == 3 ? \ + DOVE_MPP_CTRL4_VIRT_BASE : \ + DOVE_MPP_VIRT_BASE + (i) * 4) +#define PMU_SIG_REGS 2 +#define PMU_SIG_CTRL(i) (DOVE_PMU_SIG_CTRL + (i) * 4) + +struct dove_mpp_grp { + int start; + int end; +}; + +static struct dove_mpp_grp dove_mpp_grp[] = { + [MPP_24_39] = { + .start = 24, + .end = 39, + }, + [MPP_40_45] = { + .start = 40, + .end = 45, + }, + [MPP_46_51] = { + .start = 40, + .end = 45, + }, + [MPP_58_61] = { + .start = 58, + .end = 61, + }, + [MPP_62_63] = { + .start = 62, + .end = 63, + }, +}; + +static void dove_mpp_gpio_mode(int start, int end, int gpio_mode) +{ + int i; + + for (i = start; i <= end; i++) + orion_gpio_set_valid(i, gpio_mode); +} + +static void dove_mpp_dump_regs(void) +{ +#ifdef DEBUG + int i; + + pr_debug("MPP_CTRL regs:"); + for (i = 0; i < MPP_NR_REGS; i++) + printk(" %08x", readl(MPP_CTRL(i))); + printk("\n"); + + pr_debug("PMU_SIG_CTRL regs:"); + for (i = 0; i < PMU_SIG_REGS; i++) + printk(" %08x", readl(PMU_SIG_CTRL(i))); + printk("\n"); + + pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", readl(DOVE_PMU_MPP_GENERAL_CTRL)); + pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE)); +#endif +} + +static void dove_mpp_cfg_nfc(int sel) +{ + u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE); + + mpp_gen_cfg &= ~0x1; + mpp_gen_cfg |= sel; + writel(mpp_gen_cfg, DOVE_MPP_GENERAL_VIRT_BASE); + + dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK); +} + +static void dove_mpp_cfg_au1(int sel) +{ + u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); + u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1); + u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE); + u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2); + + mpp_ctrl4 &= ~(DOVE_AU1_GPIO_SEL); + ssp_ctrl1 &= ~(DOVE_SSP_ON_AU1); + mpp_gen_ctrl &= ~(DOVE_AU1_SPDIFO_GPIO_EN); + global_cfg_2 &= ~(DOVE_TWSI_OPTION3_GPIO); + + if (!sel || sel == 0x2) + dove_mpp_gpio_mode(52, 57, 0); + else + dove_mpp_gpio_mode(52, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK); + + if (sel & 0x1) { + global_cfg_2 |= DOVE_TWSI_OPTION3_GPIO; + dove_mpp_gpio_mode(56, 57, 0); + } + if (sel & 0x2) { + mpp_gen_ctrl |= DOVE_AU1_SPDIFO_GPIO_EN; + dove_mpp_gpio_mode(57, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK); + } + if (sel & 0x4) { + ssp_ctrl1 |= DOVE_SSP_ON_AU1; + dove_mpp_gpio_mode(52, 55, 0); + } + if (sel & 0x8) + mpp_ctrl4 |= DOVE_AU1_GPIO_SEL; + + writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE); + writel(ssp_ctrl1, DOVE_SSP_CTRL_STATUS_1); + writel(mpp_gen_ctrl, DOVE_MPP_GENERAL_VIRT_BASE); + writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2); +} + +static void dove_mpp_conf_grp(int num, int sel, u32 *mpp_ctrl) +{ + int start = dove_mpp_grp[num].start; + int end = dove_mpp_grp[num].end; + int gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0; + + *mpp_ctrl &= ~(0x1 << num); + *mpp_ctrl |= sel << num; + + dove_mpp_gpio_mode(start, end, gpio_mode); +} + +void __init dove_mpp_conf(unsigned int *mpp_list) +{ + u32 mpp_ctrl[MPP_NR_REGS]; + u32 pmu_mpp_ctrl = 0; + u32 pmu_sig_ctrl[PMU_SIG_REGS]; + int i; + + /* Initialize gpiolib. */ + orion_gpio_init(); + + for (i = 0; i < MPP_NR_REGS; i++) + mpp_ctrl[i] = readl(MPP_CTRL(i)); + + for (i = 0; i < PMU_SIG_REGS; i++) + pmu_sig_ctrl[i] = readl(PMU_SIG_CTRL(i)); + + pmu_mpp_ctrl = readl(DOVE_PMU_MPP_GENERAL_CTRL); + + dove_mpp_dump_regs(); + + for ( ; *mpp_list != MPP_END; mpp_list++) { + unsigned int num = MPP_NUM(*mpp_list); + unsigned int sel = MPP_SEL(*mpp_list); + int shift, gpio_mode; + + if (num > MPP_MAX) { + pr_err("dove: invalid MPP number (%u)\n", num); + continue; + } + + if (*mpp_list & MPP_NFC_MASK) { + dove_mpp_cfg_nfc(sel); + continue; + } + + if (*mpp_list & MPP_AU1_MASK) { + dove_mpp_cfg_au1(sel); + continue; + } + + if (*mpp_list & MPP_GRP_MASK) { + dove_mpp_conf_grp(num, sel, &mpp_ctrl[3]); + continue; + } + + shift = (num & 7) << 2; + if (*mpp_list & MPP_PMU_MASK) { + pmu_mpp_ctrl |= (0x1 << num); + pmu_sig_ctrl[num / 8] &= ~(0xf << shift); + pmu_sig_ctrl[num / 8] |= 0xf << shift; + gpio_mode = 0; + } else { + mpp_ctrl[num / 8] &= ~(0xf << shift); + mpp_ctrl[num / 8] |= sel << shift; + gpio_mode = GPIO_OUTPUT_OK | GPIO_INPUT_OK; + } + + orion_gpio_set_valid(num, gpio_mode); + } + + for (i = 0; i < MPP_NR_REGS; i++) + writel(mpp_ctrl[i], MPP_CTRL(i)); + + for (i = 0; i < PMU_SIG_REGS; i++) + writel(pmu_sig_ctrl[i], PMU_SIG_CTRL(i)); + + writel(pmu_mpp_ctrl, DOVE_PMU_MPP_GENERAL_CTRL); + + dove_mpp_dump_regs(); +} diff --git a/arch/arm/mach-dove/mpp.h b/arch/arm/mach-dove/mpp.h new file mode 100644 index 0000000..2a43ce4 --- /dev/null +++ b/arch/arm/mach-dove/mpp.h @@ -0,0 +1,220 @@ +#ifndef __ARCH_DOVE_MPP_CODED_H +#define __ARCH_DOVE_MPP_CODED_H + +#define MPP(_num, _mode, _pmu, _grp, _au1, _nfc) ( \ +/* MPP/group number */ ((_num) & 0xff) | \ +/* MPP select value */ (((_mode) & 0xf) << 8) | \ +/* MPP PMU */ ((!!(_pmu)) << 12) | \ +/* group flag */ ((!!(_grp)) << 13) | \ +/* AU1 flag */ ((!!(_au1)) << 14) | \ +/* NFCE flag */ ((!!(_nfc)) << 15)) + +#define MPP_MAX 71 + +#define MPP_NUM(x) ((x) & 0xff) +#define MPP_SEL(x) (((x) >> 8) & 0xf) + +#define MPP_PMU_MASK MPP(0, 0x0, 1, 0, 0, 0) +#define MPP_GRP_MASK MPP(0, 0x0, 0, 1, 0, 0) +#define MPP_AU1_MASK MPP(0, 0x0, 0, 0, 1, 0) +#define MPP_NFC_MASK MPP(0, 0x0, 0, 0, 0, 1) + +#define MPP_END MPP(0xff, 0xf, 1, 1, 1, 1) + +#define MPP_PMU_DRIVE_0 0x1 +#define MPP_PMU_DRIVE_1 0x2 +#define MPP_PMU_SDI 0x3 +#define MPP_PMU_CPU_PWRDWN 0x4 +#define MPP_PMU_STBY_PWRDWN 0x5 +#define MPP_PMU_CORE_PWR_GOOD 0x8 +#define MPP_PMU_BAT_FAULT 0xa +#define MPP_PMU_EXT0_WU 0xb +#define MPP_PMU_EXT1_WU 0xc +#define MPP_PMU_EXT2_WU 0xd +#define MPP_PMU_BLINK 0xe +#define MPP_PMU(_num, _mode) MPP((_num), MPP_PMU_##_mode, 1, 0, 0, 0) + +#define MPP_PIN(_num, _mode) MPP((_num), (_mode), 0, 0, 0, 0) +#define MPP_GRP(_grp, _mode) MPP((_grp), (_mode), 0, 1, 0, 0) +#define MPP_GRP_AU1(_mode) MPP(0, (_mode), 0, 0, 1, 0) +#define MPP_GRP_NFC(_mode) MPP(0, (_mode), 0, 0, 0, 1) + +#define MPP0_GPIO0 MPP_PIN(0, 0x0) +#define MPP0_UA2_RTSn MPP_PIN(0, 0x2) +#define MPP0_SDIO0_CD MPP_PIN(0, 0x3) +#define MPP0_LCD0_PWM MPP_PIN(0, 0xf) + +#define MPP1_GPIO1 MPP_PIN(1, 0x0) +#define MPP1_UA2_CTSn MPP_PIN(1, 0x2) +#define MPP1_SDIO0_WP MPP_PIN(1, 0x3) +#define MPP1_LCD1_PWM MPP_PIN(1, 0xf) + +#define MPP2_GPIO2 MPP_PIN(2, 0x0) +#define MPP2_SATA_PRESENT MPP_PIN(2, 0x1) +#define MPP2_UA2_TXD MPP_PIN(2, 0x2) +#define MPP2_SDIO0_BUS_POWER MPP_PIN(2, 0x3) +#define MPP2_UA_RTSn1 MPP_PIN(2, 0x4) + +#define MPP3_GPIO3 MPP_PIN(3, 0x0) +#define MPP3_SATA_ACT MPP_PIN(3, 0x1) +#define MPP3_UA2_RXD MPP_PIN(3, 0x2) +#define MPP3_SDIO0_LED_CTRL MPP_PIN(3, 0x3) +#define MPP3_UA_CTSn1 MPP_PIN(3, 0x4) +#define MPP3_SPI_LCD_CS1 MPP_PIN(3, 0xf) + +#define MPP4_GPIO4 MPP_PIN(4, 0x0) +#define MPP4_UA3_RTSn MPP_PIN(4, 0x2) +#define MPP4_SDIO1_CD MPP_PIN(4, 0x3) +#define MPP4_SPI_1_MISO MPP_PIN(4, 0x4) + +#define MPP5_GPIO5 MPP_PIN(5, 0x0) +#define MPP5_UA3_CTSn MPP_PIN(5, 0x2) +#define MPP5_SDIO1_WP MPP_PIN(5, 0x3) +#define MPP5_SPI_1_CS MPP_PIN(5, 0x4) + +#define MPP6_GPIO6 MPP_PIN(6, 0x0) +#define MPP6_UA3_TXD MPP_PIN(6, 0x2) +#define MPP6_SDIO1_BUS_POWER MPP_PIN(6, 0x3) +#define MPP6_SPI_1_MOSI MPP_PIN(6, 0x4) + +#define MPP7_GPIO7 MPP_PIN(7, 0x0) +#define MPP7_UA3_RXD MPP_PIN(7, 0x2) +#define MPP7_SDIO1_LED_CTRL MPP_PIN(7, 0x3) +#define MPP7_SPI_1_SCK MPP_PIN(7, 0x4) + +#define MPP8_GPIO8 MPP_PIN(8, 0x0) +#define MPP8_WD_RST_OUT MPP_PIN(8, 0x1) + +#define MPP9_GPIO9 MPP_PIN(9, 0x0) +#define MPP9_PEX1_CLKREQn MPP_PIN(9, 0x5) + +#define MPP10_GPIO10 MPP_PIN(10, 0x0) +#define MPP10_SSP_SCLK MPP_PIN(10, 0x5) + +#define MPP11_GPIO11 MPP_PIN(11, 0x0) +#define MPP11_SATA_PRESENT MPP_PIN(11, 0x1) +#define MPP11_SATA_ACT MPP_PIN(11, 0x2) +#define MPP11_SDIO0_LED_CTRL MPP_PIN(11, 0x3) +#define MPP11_SDIO1_LED_CTRL MPP_PIN(11, 0x4) +#define MPP11_PEX0_CLKREQn MPP_PIN(11, 0x5) + +#define MPP12_GPIO12 MPP_PIN(12, 0x0) +#define MPP12_SATA_ACT MPP_PIN(12, 0x1) +#define MPP12_UA2_RTSn MPP_PIN(12, 0x2) +#define MPP12_AD0_I2S_EXT_MCLK MPP_PIN(12, 0x3) +#define MPP12_SDIO1_CD MPP_PIN(12, 0x4) + +#define MPP13_GPIO13 MPP_PIN(13, 0x0) +#define MPP13_UA2_CTSn MPP_PIN(13, 0x2) +#define MPP13_AD1_I2S_EXT_MCLK MPP_PIN(13, 0x3) +#define MPP13_SDIO1WP MPP_PIN(13, 0x4) +#define MPP13_SSP_EXTCLK MPP_PIN(13, 0x5) + +#define MPP14_GPIO14 MPP_PIN(14, 0x0) +#define MPP14_UA2_TXD MPP_PIN(14, 0x2) +#define MPP14_SDIO1_BUS_POWER MPP_PIN(14, 0x4) +#define MPP14_SSP_RXD MPP_PIN(14, 0x5) + +#define MPP15_GPIO15 MPP_PIN(15, 0x0) +#define MPP15_UA2_RXD MPP_PIN(15, 0x2) +#define MPP15_SDIO1_LED_CTRL MPP_PIN(15, 0x4) +#define MPP15_SSP_SFRM MPP_PIN(15, 0x5) + +#define MPP16_GPIO16 MPP_PIN(16, 0x0) +#define MPP16_UA3_RTSn MPP_PIN(16, 0x2) +#define MPP16_SDIO0_CD MPP_PIN(16, 0x3) +#define MPP16_SPI_LCD_CS1 MPP_PIN(16, 0x4) +#define MPP16_AC97_SDATA_IN1 MPP_PIN(16, 0x5) + +#define MPP17_GPIO17 MPP_PIN(17, 0x0) +#define MPP17_AC97_SYSCLK_OUT MPP_PIN(17, 0x1) +#define MPP17_UA3_CTSn MPP_PIN(17, 0x2) +#define MPP17_SDIO0_WP MPP_PIN(17, 0x3) +#define MPP17_TW_SDA2 MPP_PIN(17, 0x4) +#define MPP17_AC97_SDATA_IN2 MPP_PIN(17, 0x5) + +#define MPP18_GPIO18 MPP_PIN(18, 0x0) +#define MPP18_UA3_TXD MPP_PIN(18, 0x2) +#define MPP18_SDIO0_BUS_POWER MPP_PIN(18, 0x3) +#define MPP18_LCD0_PWM MPP_PIN(18, 0x4) +#define MPP18_AC_SDATA_IN3 MPP_PIN(18, 0x5) + +#define MPP19_GPIO19 MPP_PIN(19, 0x0) +#define MPP19_UA3_RXD MPP_PIN(19, 0x2) +#define MPP19_SDIO0_LED_CTRL MPP_PIN(19, 0x3) +#define MPP19_TW_SCK2 MPP_PIN(19, 0x4) + +#define MPP20_GPIO20 MPP_PIN(20, 0x0) +#define MPP20_AC97_SYSCLK_OUT MPP_PIN(20, 0x1) +#define MPP20_SPI_LCD_MISO MPP_PIN(20, 0x2) +#define MPP20_SDIO1_CD MPP_PIN(20, 0x3) +#define MPP20_SDIO0_CD MPP_PIN(20, 0x5) +#define MPP20_SPI_1_MISO MPP_PIN(20, 0x6) + +#define MPP21_GPIO21 MPP_PIN(21, 0x0) +#define MPP21_UA1_RTSn MPP_PIN(21, 0x1) +#define MPP21_SPI_LCD_CS0 MPP_PIN(21, 0x2) +#define MPP21_SDIO1_WP MPP_PIN(21, 0x3) +#define MPP21_SSP_SFRM MPP_PIN(21, 0x4) +#define MPP21_SDIO0_WP MPP_PIN(21, 0x5) +#define MPP21_SPI_1_CS MPP_PIN(21, 0x6) + +#define MPP22_GPIO22 MPP_PIN(22, 0x0) +#define MPP22_UA1_CTSn MPP_PIN(22, 0x1) +#define MPP22_SPI_LCD_MOSI MPP_PIN(22, 0x2) +#define MPP22_SDIO1_BUS_POWER MPP_PIN(22, 0x3) +#define MPP22_SSP_TXD MPP_PIN(22, 0x4) +#define MPP22_SDIO0_BUS_POWER MPP_PIN(22, 0x5) +#define MPP22_SPI_1_MOSI MPP_PIN(22, 0x6) + +#define MPP23_GPIO23 MPP_PIN(23, 0x0) +#define MPP23_SPI_LCD_SCK MPP_PIN(23, 0x2) +#define MPP23_SDIO1_LED_CTRL MPP_PIN(23, 0x3) +#define MPP23_SSP_SCLK MPP_PIN(23, 0x4) +#define MPP23_SDIO0_LED_CTRL MPP_PIN(23, 0x5) +#define MPP23_SPI_1_SCK MPP_PIN(23, 0x6) + +/* for MPP groups _num is a group index */ +enum dove_mpp_grp_idx { + MPP_24_39 = 2, + MPP_40_45 = 0, + MPP_46_51 = 1, + MPP_58_61 = 5, + MPP_62_63 = 4, +}; + +#define MPP24_39_GPIO MPP_GRP(MPP_24_39, 0x1) +#define MPP24_39_CAM MPP_GRP(MPP_24_39, 0x0) + +#define MPP40_45_GPIO MPP_GRP(MPP_40_45, 0x1) +#define MPP40_45_SD0 MPP_GRP(MPP_40_45, 0x0) + +#define MPP46_51_GPIO MPP_GRP(MPP_46_51, 0x1) +#define MPP46_51_SD1 MPP_GRP(MPP_46_51, 0x0) + +#define MPP58_61_GPIO MPP_GRP(MPP_58_61, 0x1) +#define MPP58_61_SPI MPP_GRP(MPP_58_61, 0x0) + +#define MPP62_63_GPIO MPP_GRP(MPP_62_63, 0x1) +#define MPP62_63_UA1 MPP_GRP(MPP_62_63, 0x0) + +/* The MPP[64:71] control differs from other groups */ +#define MPP64_71_GPO MPP_GRP_NFC(0x1) +#define MPP64_71_NFC MPP_GRP_NFC(0x0) + +/* + * The MPP[52:57] functionality is encoded by 4 bits in different + * registers. The _num field in this case encodes those bits in + * correspodence with Table 135 of 88AP510 Functional specification + */ +#define MPP52_57_AU1 MPP_GRP_AU1(0x0) +#define MPP52_57_AU1_GPIO57 MPP_GRP_AU1(0x2) +#define MPP52_57_GPIO MPP_GRP_AU1(0xa) +#define MPP52_57_TW_GPIO MPP_GRP_AU1(0xb) +#define MPP52_57_AU1_SSP MPP_GRP_AU1(0xc) +#define MPP52_57_SSP_GPIO MPP_GRP_AU1(0xe) +#define MPP52_57_SSP_TW MPP_GRP_AU1(0xf) + +void dove_mpp_conf(unsigned int *mpp_list); + +#endif /* __ARCH_DOVE_MPP_CODED_H */ diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 3410633..7fc603b 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -45,18 +45,18 @@ config MACH_GURUPLUG Marvell GuruPlug Reference Board. config MACH_TS219 - bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS" + bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help Say 'Y' here if you want your kernel to support the - QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS - devices. + QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices. config MACH_TS41X - bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS" + bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" help Say 'Y' here if you want your kernel to support the - QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS - devices. + QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo + NAS devices. config MACH_DOCKSTAR bool "Seagate FreeAgent DockStar" diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 6710bd7..dc999c4 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -80,15 +80,19 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP11_UART0_RXD, MPP13_UART1_TXD, /* PIC controller */ MPP14_UART1_RXD, /* PIC controller */ - MPP15_GPIO, /* USB Copy button */ - MPP16_GPIO, /* Reset button */ + MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ + MPP16_GPIO, /* Reset button (on devices with 88F6281) */ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP37_GPIO, /* Reset button (on devices with 88F6282) */ + MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ 0 }; static void __init qnap_ts219_init(void) { + u32 dev, rev; + /* * Basic setup. Needs to be called early. */ @@ -100,6 +104,14 @@ static void __init qnap_ts219_init(void) qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) { + qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */ + qnap_ts219_buttons[1].gpio = 37; /* Reset button */ + qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + } + kirkwood_ge00_init(&qnap_ts219_ge00_data); kirkwood_sata_init(&qnap_ts219_sata_data); kirkwood_ehci_init(); diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 3587a28..9a44029 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -119,6 +119,8 @@ static unsigned int qnap_ts41x_mpp_config[] __initdata = { static void __init qnap_ts41x_init(void) { + u32 dev, rev; + /* * Basic setup. Needs to be called early. */ @@ -130,8 +132,15 @@ static void __init qnap_ts41x_init(void) qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) { + qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1); + } kirkwood_ge00_init(&qnap_ts41x_ge00_data); kirkwood_ge01_init(&qnap_ts41x_ge01_data); + kirkwood_sata_init(&qnap_ts41x_sata_data); kirkwood_ehci_init(); platform_device_register(&qnap_ts41x_button_device); diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index dbbcfeb..31e5fd6 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -49,6 +49,8 @@ endchoice config MSM_SOC_REV_A bool +config ARCH_MSM_SCORPIONMP + bool config ARCH_MSM_ARM11 bool diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 788bdac..3eff399 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -65,7 +65,7 @@ */ #define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) #define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700) +#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1570) #define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000) #define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index c897e03..6604fc6 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -51,6 +51,13 @@ config MACH_LINKSTATION_PRO Buffalo Linkstation Pro/Live platform. Both v1 and v2 devices are supported. +config MACH_LINKSTATION_LSCHL + bool "Buffalo Linkstation Live v3 (LS-CHL)" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation Live v3 (LS-CHL) platform. + config MACH_LINKSTATION_MINI bool "Buffalo Linkstation Mini" select I2C_BOARDINFO diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index eb6eabc..7f18cda 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o +obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c new file mode 100644 index 0000000..20a9b66 --- /dev/null +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -0,0 +1,327 @@ +/* + * arch/arm/mach-orion5x/ls-chl-setup.c + * + * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/gpio-fan.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/ata_platform.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/system.h> +#include <mach/orion5x.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * Linkstation LS-CHL Info + ****************************************************************************/ + +/* + * 256K NOR flash Device bus boot chip select + */ + +#define LSCHL_NOR_BOOT_BASE 0xf4000000 +#define LSCHL_NOR_BOOT_SIZE SZ_256K + +/***************************************************************************** + * 256KB NOR Flash on BOOT Device + ****************************************************************************/ + +static struct physmap_flash_data lschl_nor_flash_data = { + .width = 1, +}; + +static struct resource lschl_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = LSCHL_NOR_BOOT_BASE, + .end = LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device lschl_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &lschl_nor_flash_data, + }, + .num_resources = 1, + .resource = &lschl_nor_flash_resource, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data lschl_eth_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * RTC 5C372a on I2C bus + ****************************************************************************/ + +static struct i2c_board_info __initdata lschl_i2c_rtc = { + I2C_BOARD_INFO("rs5c372a", 0x32), +}; + +/***************************************************************************** + * LEDs attached to GPIO + ****************************************************************************/ + +#define LSCHL_GPIO_LED_ALARM 2 +#define LSCHL_GPIO_LED_INFO 3 +#define LSCHL_GPIO_LED_FUNC 17 +#define LSCHL_GPIO_LED_PWR 0 + +static struct gpio_led lschl_led_pins[] = { + { + .name = "alarm:red", + .gpio = LSCHL_GPIO_LED_ALARM, + .active_low = 1, + }, { + .name = "info:amber", + .gpio = LSCHL_GPIO_LED_INFO, + .active_low = 1, + }, { + .name = "func:blue:top", + .gpio = LSCHL_GPIO_LED_FUNC, + .active_low = 1, + }, { + .name = "power:blue:bottom", + .gpio = LSCHL_GPIO_LED_PWR, + }, +}; + +static struct gpio_led_platform_data lschl_led_data = { + .leds = lschl_led_pins, + .num_leds = ARRAY_SIZE(lschl_led_pins), +}; + +static struct platform_device lschl_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &lschl_led_data, + }, +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data lschl_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * LS-CHL specific power off method: reboot + ****************************************************************************/ +/* + * On the LS-CHL, the shutdown process is following: + * - Userland monitors key events until the power switch goes to off position + * - The board reboots + * - U-boot starts and goes into an idle mode waiting for the user + * to move the switch to ON position + * + */ + +static void lschl_power_off(void) +{ + arm_machine_restart('h', NULL); +} + +/***************************************************************************** + * General Setup + ****************************************************************************/ +#define LSCHL_GPIO_USB_POWER 9 +#define LSCHL_GPIO_AUTO_POWER 17 +#define LSCHL_GPIO_POWER 18 + +/**************************************************************************** + * GPIO Attached Keys + ****************************************************************************/ +#define LSCHL_GPIO_KEY_FUNC 15 +#define LSCHL_GPIO_KEY_POWER 8 +#define LSCHL_GPIO_KEY_AUTOPOWER 10 +#define LSCHL_SW_POWER 0x00 +#define LSCHL_SW_AUTOPOWER 0x01 +#define LSCHL_SW_FUNC 0x02 + +static struct gpio_keys_button lschl_buttons[] = { + { + .type = EV_SW, + .code = LSCHL_SW_POWER, + .gpio = LSCHL_GPIO_KEY_POWER, + .desc = "Power-on Switch", + .active_low = 1, + }, { + .type = EV_SW, + .code = LSCHL_SW_AUTOPOWER, + .gpio = LSCHL_GPIO_KEY_AUTOPOWER, + .desc = "Power-auto Switch", + .active_low = 1, + }, { + .type = EV_SW, + .code = LSCHL_SW_FUNC, + .gpio = LSCHL_GPIO_KEY_FUNC, + .desc = "Function Switch", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data lschl_button_data = { + .buttons = lschl_buttons, + .nbuttons = ARRAY_SIZE(lschl_buttons), +}; + +static struct platform_device lschl_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &lschl_button_data, + }, +}; + +#define LSCHL_GPIO_HDD_POWER 1 + +/**************************************************************************** + * GPIO Fan + ****************************************************************************/ + +#define LSCHL_GPIO_FAN_LOW 16 +#define LSCHL_GPIO_FAN_HIGH 14 +#define LSCHL_GPIO_FAN_LOCK 6 + +static struct gpio_fan_alarm lschl_alarm = { + .gpio = LSCHL_GPIO_FAN_LOCK, +}; + +static struct gpio_fan_speed lschl_speeds[] = { + { + .rpm = 0, + .ctrl_val = 3, + }, { + .rpm = 1500, + .ctrl_val = 2, + }, { + .rpm = 3250, + .ctrl_val = 1, + }, { + .rpm = 5000, + .ctrl_val = 0, + }, +}; + +static int lschl_gpio_list[] = { + LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW, +}; + +static struct gpio_fan_platform_data lschl_fan_data = { + .num_ctrl = ARRAY_SIZE(lschl_gpio_list), + .ctrl = lschl_gpio_list, + .alarm = &lschl_alarm, + .num_speed = ARRAY_SIZE(lschl_speeds), + .speed = lschl_speeds, +}; + +static struct platform_device lschl_fan_device = { + .name = "gpio-fan", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &lschl_fan_data, + }, +}; + +/**************************************************************************** + * GPIO Data + ****************************************************************************/ + +static struct orion5x_mpp_mode lschl_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* LED POWER */ + { 1, MPP_GPIO }, /* HDD POWER */ + { 2, MPP_GPIO }, /* LED ALARM */ + { 3, MPP_GPIO }, /* LED INFO */ + { 4, MPP_UNUSED }, + { 5, MPP_UNUSED }, + { 6, MPP_GPIO }, /* FAN LOCK */ + { 7, MPP_GPIO }, /* SW INIT */ + { 8, MPP_GPIO }, /* SW POWER */ + { 9, MPP_GPIO }, /* USB POWER */ + { 10, MPP_GPIO }, /* SW AUTO POWER */ + { 11, MPP_UNUSED }, + { 12, MPP_UNUSED }, + { 13, MPP_UNUSED }, + { 14, MPP_GPIO }, /* FAN HIGH */ + { 15, MPP_GPIO }, /* SW FUNC */ + { 16, MPP_GPIO }, /* FAN LOW */ + { 17, MPP_GPIO }, /* LED FUNC */ + { 18, MPP_UNUSED }, + { 19, MPP_UNUSED }, + { -1 }, +}; + +static void __init lschl_init(void) +{ + /* + * Setup basic Orion functions. Needs to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(lschl_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_ehci1_init(); + orion5x_eth_init(&lschl_eth_data); + orion5x_i2c_init(); + orion5x_sata_init(&lschl_sata_data); + orion5x_uart0_init(); + orion5x_xor_init(); + + orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE, + LSCHL_NOR_BOOT_SIZE); + platform_device_register(&lschl_nor_flash); + + platform_device_register(&lschl_leds); + + platform_device_register(&lschl_button_device); + + platform_device_register(&lschl_fan_device); + + i2c_register_board_info(0, &lschl_i2c_rtc, 1); + + /* usb power on */ + gpio_set_value(LSCHL_GPIO_USB_POWER, 1); + + /* register power-off method */ + pm_power_off = lschl_power_off; + + pr_info("%s: finished\n", __func__); +} + +MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") + /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */ + .boot_params = 0x00000100, + .init_machine = lschl_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c index 9768cf7..9696ddc 100644 --- a/arch/arm/plat-versatile/sched-clock.c +++ b/arch/arm/plat-versatile/sched-clock.c @@ -20,6 +20,7 @@ */ #include <linux/cnt32_to_63.h> #include <linux/io.h> +#include <linux/sched.h> #include <asm/div64.h> #include <mach/hardware.h> |
