summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig6
-rw-r--r--arch/arm/mach-pxa/Kconfig29
-rw-r--r--arch/arm/mach-pxa/Makefile9
-rw-r--r--arch/arm/mach-pxa/generic.c8
-rw-r--r--arch/arm/mach-pxa/generic.h8
-rw-r--r--arch/arm/mach-pxa/irq.c2
-rw-r--r--arch/arm/mach-pxa/mfp.c235
-rw-r--r--arch/arm/mach-pxa/pxa300.c93
-rw-r--r--arch/arm/mach-pxa/pxa320.c88
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c216
-rw-r--r--arch/arm/mach-pxa/zylonite.c184
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c188
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c173
-rw-r--r--arch/arm/mm/Kconfig2
14 files changed, 1233 insertions, 8 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 691aae3..a25697b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -336,14 +336,14 @@ config ARCH_PNX4008
This enables support for Philips PNX4008 mobile platform.
config ARCH_PXA
- bool "PXA2xx-based"
+ bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
- Support for Intel's PXA2XX processor line.
+ Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_RPC
bool "RiscPC"
@@ -486,7 +486,7 @@ source arch/arm/mm/Kconfig
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3
- default y if PXA27x
+ default y if PXA27x || PXA3xx
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5ebec6d..e895188 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -1,6 +1,24 @@
if ARCH_PXA
-menu "Intel PXA2xx Implementations"
+menu "Intel PXA2xx/PXA3xx Implementations"
+
+if PXA3xx
+
+menu "Supported PXA3xx Processor Variants"
+
+config CPU_PXA300
+ bool "PXA300 (codename Monahans-L)"
+
+config CPU_PXA310
+ bool "PXA310 (codename Monahans-LV)"
+ select CPU_PXA300
+
+config CPU_PXA320
+ bool "PXA320 (codename Monahans-P)"
+
+endmenu
+
+endif
choice
prompt "Select target board"
@@ -41,6 +59,10 @@ config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
+config MACH_ZYLONITE
+ bool "PXA3xx Development Platform"
+ select PXA3xx
+
endchoice
if PXA_SHARPSL
@@ -130,6 +152,11 @@ config PXA27x
help
Select code specific to PXA27x variants
+config PXA3xx
+ bool
+ help
+ Select code specific to PXA3xx variants
+
config PXA_SHARP_C7xx
bool
select PXA_SSP
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 8970928..bfdd0c5 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -6,6 +6,9 @@
obj-y += clock.o generic.o irq.o dma.o time.o
obj-$(CONFIG_PXA25x) += pxa25x.o
obj-$(CONFIG_PXA27x) += pxa27x.o
+obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o
+obj-$(CONFIG_CPU_PXA300) += pxa300.o
+obj-$(CONFIG_CPU_PXA320) += pxa320.o
# Specific board support
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
@@ -20,6 +23,12 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+ifeq ($(CONFIG_MACH_ZYLONITE),y)
+ obj-y += zylonite.o
+ obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
+ obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
+endif
+
# Support for blinky lights
led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index eed95eaf..2263a84 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -51,8 +51,10 @@ unsigned int get_clk_frequency_khz(int info)
{
if (cpu_is_pxa21x() || cpu_is_pxa25x())
return pxa25x_get_clk_frequency_khz(info);
- else
+ else if (cpu_is_pxa27x())
return pxa27x_get_clk_frequency_khz(info);
+ else
+ return pxa3xx_get_clk_frequency_khz(info);
}
EXPORT_SYMBOL(get_clk_frequency_khz);
@@ -63,8 +65,10 @@ unsigned int get_memclk_frequency_10khz(void)
{
if (cpu_is_pxa21x() || cpu_is_pxa25x())
return pxa25x_get_memclk_frequency_10khz();
- else
+ else if (cpu_is_pxa27x())
return pxa27x_get_memclk_frequency_10khz();
+ else
+ return pxa3xx_get_memclk_frequency_10khz();
}
EXPORT_SYMBOL(get_memclk_frequency_10khz);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 2c4fe61..b30f240 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -18,6 +18,7 @@ extern void __init pxa_init_irq_gpio(int gpio_nr);
extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
extern void __init pxa27x_init_irq(void);
+extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
@@ -44,3 +45,10 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void);
#define pxa27x_get_memclk_frequency_10khz() (0)
#endif
+#ifdef CONFIG_PXA3xx
+extern unsigned pxa3xx_get_clk_frequency_khz(int);
+extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+#else
+#define pxa3xx_get_clk_frequency_khz(x) (0)
+#define pxa3xx_get_memclk_frequency_10khz() (0)
+#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 294cc67..07acb45 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -65,7 +65,7 @@ void __init pxa_init_irq_low(void)
}
}
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
/*
* This is for the second set of internal IRQs as found on the PXA27x.
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c
new file mode 100644
index 0000000..5cd3cad
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp.c
@@ -0,0 +1,235 @@
+/*
+ * linux/arch/arm/mach-pxa/mfp.c
+ *
+ * PXA3xx Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp.h>
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
+static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
+
+#define mfpr_readl(off) \
+ __raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val) \
+ __raw_writel(val, mfpr_mmio_base + (off))
+
+/*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
+
+static inline void __mfp_config(int pin, unsigned long val)
+{
+ unsigned long off = mfp_table[pin].mfpr_off;
+
+ mfp_table[pin].mfpr_val = val;
+ mfpr_writel(off, val);
+}
+
+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num)
+{
+ int i, pin;
+ unsigned long val, flags;
+ mfp_cfg_t *mfp_cfg = mfp_cfgs;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (i = 0; i < num; i++, mfp_cfg++) {
+ pin = MFP_CFG_PIN(*mfp_cfg);
+ val = MFP_CFG_VAL(*mfp_cfg);
+
+ BUG_ON(pin >= MFP_PIN_MAX);
+
+ __mfp_config(pin, val);
+ }
+
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long pxa3xx_mfp_read(int mfp)
+{
+ unsigned long val, flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ val = mfpr_readl(mfp_table[mfp].mfpr_off);
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+ return val;
+}
+
+void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ mfpr_writel(mfp_table[mfp].mfpr_off, val);
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ mfpr_off = mfp_table[mfp].mfpr_off;
+
+ mfpr_val = mfpr_readl(mfpr_off);
+ mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
+ mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
+ ((ds & 0x7) << MFPR_DRV_OFFSET));
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_rdh(int mfp, int rdh)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ mfpr_off = mfp_table[mfp].mfpr_off;
+
+ mfpr_val = mfpr_readl(mfpr_off);
+ mfpr_val &= ~MFPR_RDH_MASK;
+
+ if (likely(rdh))
+ mfpr_val |= (1u << MFPR_SS_OFFSET);
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_lpm(int mfp, int lpm)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ mfpr_off = mfp_table[mfp].mfpr_off;
+ mfpr_val = mfpr_readl(mfpr_off);
+ mfpr_val &= ~MFPR_LPM_MASK;
+
+ if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
+ if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
+ if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
+ if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
+ if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_pull(int mfp, int pull)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ mfpr_off = mfp_table[mfp].mfpr_off;
+ mfpr_val = mfpr_readl(mfpr_off);
+ mfpr_val &= ~MFPR_PULL_MASK;
+ mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_edge(int mfp, int edge)
+{
+ uint32_t mfpr_off, mfpr_val;
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ mfpr_off = mfp_table[mfp].mfpr_off;
+ mfpr_val = mfpr_readl(mfpr_off);
+
+ mfpr_val &= ~MFPR_EDGE_MASK;
+ mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
+ mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
+
+ mfpr_writel(mfpr_off, mfpr_val);
+ mfpr_sync();
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
+{
+ struct pxa3xx_mfp_addr_map *p;
+ unsigned long offset, flags;
+ int i;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (p = map; p->start != MFP_PIN_INVALID; p++) {
+ offset = p->offset;
+ i = p->start;
+
+ do {
+ mfp_table[i].mfpr_off = offset;
+ mfp_table[i].mfpr_val = 0;
+ offset += 4; i++;
+ } while ((i <= p->end) && (p->end != -1));
+ }
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init pxa3xx_init_mfp(void)
+{
+ memset(mfp_table, 0, sizeof(mfp_table));
+}
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
new file mode 100644
index 0000000..5363b13
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -0,0 +1,93 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa300.c
+ *
+ * Code specific to PXA300/PXA310
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp-pxa300.h>
+
+static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
+ MFP_ADDR_X(GPIO3, GPIO26, 0x027c),
+ MFP_ADDR_X(GPIO27, GPIO127, 0x0400),
+ MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec),
+
+ MFP_ADDR(nBE0, 0x0204),
+ MFP_ADDR(nBE1, 0x0208),
+
+ MFP_ADDR(nLUA, 0x0244),
+ MFP_ADDR(nLLA, 0x0254),
+
+ MFP_ADDR(DF_CLE_nOE, 0x0240),
+ MFP_ADDR(DF_nRE_nOE, 0x0200),
+ MFP_ADDR(DF_ALE_nWE, 0x020C),
+ MFP_ADDR(DF_INT_RnB, 0x00C8),
+ MFP_ADDR(DF_nCS0, 0x0248),
+ MFP_ADDR(DF_nCS1, 0x0278),
+ MFP_ADDR(DF_nWE, 0x00CC),
+
+ MFP_ADDR(DF_ADDR0, 0x0210),
+ MFP_ADDR(DF_ADDR1, 0x0214),
+ MFP_ADDR(DF_ADDR2, 0x0218),
+ MFP_ADDR(DF_ADDR3, 0x021C),
+
+ MFP_ADDR(DF_IO0, 0x0220),
+ MFP_ADDR(DF_IO1, 0x0228),
+ MFP_ADDR(DF_IO2, 0x0230),
+ MFP_ADDR(DF_IO3, 0x0238),
+ MFP_ADDR(DF_IO4, 0x0258),
+ MFP_ADDR(DF_IO5, 0x0260),
+ MFP_ADDR(DF_IO6, 0x0268),
+ MFP_ADDR(DF_IO7, 0x0270),
+ MFP_ADDR(DF_IO8, 0x0224),
+ MFP_ADDR(DF_IO9, 0x022C),
+ MFP_ADDR(DF_IO10, 0x0234),
+ MFP_ADDR(DF_IO11, 0x023C),
+ MFP_ADDR(DF_IO12, 0x025C),
+ MFP_ADDR(DF_IO13, 0x0264),
+ MFP_ADDR(DF_IO14, 0x026C),
+ MFP_ADDR(DF_IO15, 0x0274),
+
+ MFP_ADDR_END,
+};
+
+/* override pxa300 MFP register addresses */
+static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
+ MFP_ADDR_X(GPIO30, GPIO98, 0x0418),
+ MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
+
+ MFP_ADDR(ULPI_STP, 0x040C),
+ MFP_ADDR(ULPI_NXT, 0x0410),
+ MFP_ADDR(ULPI_DIR, 0x0414),
+
+ MFP_ADDR_END,
+};
+
+static int __init pxa300_init(void)
+{
+ if (cpu_is_pxa300() || cpu_is_pxa310()) {
+ pxa3xx_init_mfp();
+ pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+ }
+
+ if (cpu_is_pxa310())
+ pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+
+ return 0;
+}
+
+core_initcall(pxa300_init);
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
new file mode 100644
index 0000000..cd9eba5
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -0,0 +1,88 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa320.c
+ *
+ * Code specific to PXA320
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa320.h>
+
+static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
+ MFP_ADDR_X(GPIO5, GPIO26, 0x028C),
+ MFP_ADDR_X(GPIO27, GPIO62, 0x0400),
+ MFP_ADDR_X(GPIO63, GPIO73, 0x04B4),
+ MFP_ADDR_X(GPIO74, GPIO98, 0x04F0),
+ MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
+ MFP_ADDR_X(GPIO0_2, GPIO5_2, 0x0674),
+ MFP_ADDR_X(GPIO6_2, GPIO13_2, 0x0494),
+ MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0),
+
+ MFP_ADDR(nXCVREN, 0x0138),
+ MFP_ADDR(DF_CLE_nOE, 0x0204),
+ MFP_ADDR(DF_nADV1_ALE, 0x0208),
+ MFP_ADDR(DF_SCLK_S, 0x020C),
+ MFP_ADDR(DF_SCLK_E, 0x0210),
+ MFP_ADDR(nBE0, 0x0214),
+ MFP_ADDR(nBE1, 0x0218),
+ MFP_ADDR(DF_nADV2_ALE, 0x021C),
+ MFP_ADDR(DF_INT_RnB, 0x0220),
+ MFP_ADDR(DF_nCS0, 0x0224),
+ MFP_ADDR(DF_nCS1, 0x0228),
+ MFP_ADDR(DF_nWE, 0x022C),
+ MFP_ADDR(DF_nRE_nOE, 0x0230),
+ MFP_ADDR(nLUA, 0x0234),
+ MFP_ADDR(nLLA, 0x0238),
+ MFP_ADDR(DF_ADDR0, 0x023C),
+ MFP_ADDR(DF_ADDR1, 0x0240),
+ MFP_ADDR(DF_ADDR2, 0x0244),
+ MFP_ADDR(DF_ADDR3, 0x0248),
+ MFP_ADDR(DF_IO0, 0x024C),
+ MFP_ADDR(DF_IO8, 0x0250),
+ MFP_ADDR(DF_IO1, 0x0254),
+ MFP_ADDR(DF_IO9, 0x0258),
+ MFP_ADDR(DF_IO2, 0x025C),
+ MFP_ADDR(DF_IO10, 0x0260),
+ MFP_ADDR(DF_IO3, 0x0264),
+ MFP_ADDR(DF_IO11, 0x0268),
+ MFP_ADDR(DF_IO4, 0x026C),
+ MFP_ADDR(DF_IO12, 0x0270),
+ MFP_ADDR(DF_IO5, 0x0274),
+ MFP_ADDR(DF_IO13, 0x0278),
+ MFP_ADDR(DF_IO6, 0x027C),
+ MFP_ADDR(DF_IO14, 0x0280),
+ MFP_ADDR(DF_IO7, 0x0284),
+ MFP_ADDR(DF_IO15, 0x0288),
+
+ MFP_ADDR_END,
+};
+
+static void __init pxa320_init_mfp(void)
+{
+ pxa3xx_init_mfp();
+ pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+}
+
+static int __init pxa320_init(void)
+{
+ if (cpu_is_pxa320())
+ pxa320_init_mfp();
+
+ return 0;
+}
+
+core_initcall(pxa320_init);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
new file mode 100644
index 0000000..39f0de8
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -0,0 +1,216 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-02: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/ssp.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+/* Crystal clock: 13MHz */
+#define BASE_CLK 13000000
+
+/* Ring Oscillator Clock: 60MHz */
+#define RO_CLK 60000000
+
+#define ACCR_D0CS (1 << 26)
+
+/* crystal frequency to static memory controller multiplier (SMCFS) */
+static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
+
+/* crystal frequency to HSIO bus frequency multiplier (HSS) */
+static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa3xx_get_clk_frequency_khz(int info)
+{
+ unsigned long acsr, xclkcfg;
+ unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
+
+ /* Read XCLKCFG register turbo bit */
+ __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+ t = xclkcfg & 0x1;
+
+ acsr = ACSR;
+
+ xl = acsr & 0x1f;
+ xn = (acsr >> 8) & 0x7;
+ hss = (acsr >> 14) & 0x3;
+
+ XL = xl * BASE_CLK;
+ XN = xn * XL;
+
+ ro = acsr & ACCR_D0CS;
+
+ CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
+ HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+ if (info) {
+ pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
+ RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
+ (ro) ? "" : "in");
+ pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
+ XL / 1000000, (XL % 1000000) / 10000, xl);
+ pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
+ XN / 1000000, (XN % 1000000) / 10000, xn,
+ (t) ? "" : "in");
+ pr_info("HSIO bus clock: %d.%02dMHz\n",
+ HSS / 1000000, (HSS % 1000000) / 10000);
+ }
+
+ return CLK;
+}
+
+/*
+ * Return the current static memory controller clock frequency
+ * in units of 10kHz
+ */
+unsigned int pxa3xx_get_memclk_frequency_10khz(void)
+{
+ unsigned long acsr;
+ unsigned int smcfs, clk = 0;
+
+ acsr = ACSR;
+
+ smcfs = (acsr >> 23) & 0x7;
+ clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK;
+
+ return (clk / 10000);
+}
+
+/*
+ * Return the current HSIO bus clock frequency
+ */
+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
+{
+ unsigned long acsr;
+ unsigned int hss, hsio_clk;
+
+ acsr = ACSR;
+
+ hss = (acsr >> 14) & 0x3;
+ hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+ return hsio_clk;
+}
+
+static void clk_pxa3xx_cken_enable(struct clk *clk)
+{
+ unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+ local_irq_disable();
+
+ if (clk->cken < 32)
+ CKENA |= mask;
+ else
+ CKENB |= mask;
+
+ local_irq_enable();
+}
+
+static void clk_pxa3xx_cken_disable(struct clk *clk)
+{
+ unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+ local_irq_disable();
+
+ if (clk->cken < 32)
+ CKENA &= ~mask;
+ else
+ CKENB &= ~mask;
+
+ local_irq_enable();
+}
+
+static const struct clkops clk_pxa3xx_hsio_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+ .getrate = clk_pxa3xx_hsio_getrate,
+};
+
+static struct clk pxa3xx_clks[] = {
+ INIT_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
+ INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
+
+ INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
+ INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
+ INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
+
+ INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev),
+ INIT_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev),
+};
+
+void __init pxa3xx_init_irq(void)
+{
+ /* enable CP6 access */
+ u32 value;
+ __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
+ value |= (1 << 6);
+ __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
+
+ pxa_init_irq_low();
+ pxa_init_irq_high();
+ pxa_init_irq_gpio(128);
+}
+
+/*
+ * device registration specific to PXA3xx.
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &pxa_device_mci,
+ &pxa_device_udc,
+ &pxa_device_fb,
+ &pxa_device_ffuart,
+ &pxa_device_btuart,
+ &pxa_device_stuart,
+ &pxa_device_i2c,
+ &pxa_device_i2s,
+ &pxa_device_ficp,
+ &pxa_device_rtc,
+};
+
+static int __init pxa3xx_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa3xx()) {
+ clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
+
+ if ((ret = pxa_init_dma(32)))
+ return ret;
+
+ return platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+ return 0;
+}
+
+subsys_initcall(pxa3xx_init);
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
new file mode 100644
index 0000000..3f18d76
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -0,0 +1,184 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite.c
+ *
+ * Support for the PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ * rewrite to align with latest kernel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/zylonite.h>
+
+#include "generic.h"
+
+int gpio_backlight;
+int gpio_eth_irq;
+
+int lcd_id;
+int lcd_orientation;
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = ZYLONITE_ETH_PHYS + 0x300,
+ .end = ZYLONITE_ETH_PHYS + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = -1, /* for run-time assignment */
+ .end = -1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
+static void zylonite_backlight_power(int on)
+{
+ gpio_set_value(gpio_backlight, on);
+}
+
+static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
+ .pixclock = 110000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 6,
+ .right_margin = 4,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 3,
+ .sync = FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
+ .pixclock = 50000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 0x9f,
+ .right_margin = 1,
+ .vsync_len = 44,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
+ .num_modes = 1,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_PCP,
+ .pxafb_backlight_power = zylonite_backlight_power,
+};
+
+static struct pxafb_mode_info sharp_ls037_modes[] = {
+ [0] = {
+ .pixclock = 158000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 39,
+ .right_margin = 39,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 3,
+ .sync = 0,
+ },
+ [1] = {
+ .pixclock = 39700,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 81,
+ .right_margin = 81,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 7,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info zylonite_sharp_lcd_info = {
+ .modes = sharp_ls037_modes,
+ .num_modes = 2,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_PCP | LCCR3_HSP | LCCR3_VSP,
+ .pxafb_backlight_power = zylonite_backlight_power,
+};
+
+static void __init zylonite_init_lcd(void)
+{
+ /* backlight GPIO: output, default on */
+ gpio_direction_output(gpio_backlight, 1);
+
+ if (lcd_id & 0x20) {
+ set_pxa_fb_info(&zylonite_sharp_lcd_info);
+ return;
+ }
+
+ /* legacy LCD panels, it would be handy here if LCD panel type can
+ * be decided at run-time
+ */
+ if (1)
+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
+ else
+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
+
+ set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+}
+#else
+static inline void zylonite_init_lcd(void) {}
+#endif
+
+static void __init zylonite_init(void)
+{
+ /* board-processor specific initialization */
+ zylonite_pxa300_init();
+ zylonite_pxa320_init();
+
+ /*
+ * Note: We depend that the bootloader set
+ * the correct value to MSC register for SMC91x.
+ */
+ smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
+ smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq);
+ platform_device_register(&smc91x_device);
+
+ zylonite_init_lcd();
+}
+
+MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = zylonite_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
new file mode 100644
index 0000000..b5fbd2f
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -0,0 +1,188 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite_pxa300.c
+ *
+ * PXA300/PXA310 specific support code for the
+ * PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/zylonite.h>
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+/* PXA300/PXA310 common configurations */
+static mfp_cfg_t common_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+ GPIO76_LCD_VSYNC,
+ GPIO127_LCD_CS_N,
+
+ /* BTUART */
+ GPIO111_UART2_RTS,
+ GPIO112_UART2_RXD,
+ GPIO113_UART2_TXD,
+ GPIO114_UART2_CTS,
+
+ /* STUART */
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD,
+
+ /* AC97 */
+ GPIO23_AC97_nACRESET,
+ GPIO24_AC97_SYSCLK,
+ GPIO29_AC97_BITCLK,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+
+ /* Keypad */
+ GPIO107_KP_DKIN_0,
+ GPIO108_KP_DKIN_1,
+ GPIO115_KP_MKIN_0,
+ GPIO116_KP_MKIN_1,
+ GPIO117_KP_MKIN_2,
+ GPIO118_KP_MKIN_3,
+ GPIO119_KP_MKIN_4,
+ GPIO120_KP_MKIN_5,
+ GPIO2_2_KP_MKIN_6,
+ GPIO3_2_KP_MKIN_7,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO4_2_KP_MKOUT_5,
+ GPIO5_2_KP_MKOUT_6,
+ GPIO6_2_KP_MKOUT_7,
+};
+
+static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
+ /* FFUART */
+ GPIO30_UART1_RXD,
+ GPIO31_UART1_TXD,
+ GPIO32_UART1_CTS,
+ GPIO37_UART1_RTS,
+ GPIO33_UART1_DCD,
+ GPIO34_UART1_DSR,
+ GPIO35_UART1_RI,
+ GPIO36_UART1_DTR,
+
+ /* Ethernet */
+ GPIO2_nCS3,
+ GPIO99_GPIO,
+};
+
+static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
+ /* FFUART */
+ GPIO99_UART1_RXD,
+ GPIO100_UART1_TXD,
+ GPIO101_UART1_CTS,
+ GPIO106_UART1_RTS,
+
+ /* Ethernet */
+ GPIO2_nCS3,
+ GPIO102_GPIO,
+};
+
+#define NUM_LCD_DETECT_PINS 7
+
+static int lcd_detect_pins[] __initdata = {
+ MFP_PIN_GPIO71, /* LCD_LDD_17 - ORIENT */
+ MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
+ MFP_PIN_GPIO75, /* LCD_BIAS - LCDID[4] */
+ MFP_PIN_GPIO73, /* LCD_LCLK - LCDID[3] */
+ MFP_PIN_GPIO72, /* LCD_FCLK - LCDID[2] */
+ MFP_PIN_GPIO127,/* LCD_CS_N - LCDID[1] */
+ MFP_PIN_GPIO76, /* LCD_VSYNC - LCDID[0] */
+};
+
+static void __init zylonite_detect_lcd_panel(void)
+{
+ unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
+ int i, gpio, id = 0;
+
+ /* save the original MFP settings of these pins and configure
+ * them as GPIO Input, DS01X, Pull Neither, Edge Clear
+ */
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
+ pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
+ }
+
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ id = id << 1;
+ gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_direction_input(gpio);
+
+ if (gpio_get_value(gpio))
+ id = id | 0x1;
+ }
+
+ /* lcd id, flush out bit 1 */
+ lcd_id = id & 0x3d;
+
+ /* lcd orientation, portrait or landscape */
+ lcd_orientation = (id >> 6) & 0x1;
+
+ /* restore the original MFP settings */
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
+}
+
+void __init zylonite_pxa300_init(void)
+{
+ if (cpu_is_pxa300() || cpu_is_pxa310()) {
+ /* initialize MFP */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
+
+ /* detect LCD panel */
+ zylonite_detect_lcd_panel();
+
+ /* GPIO pin assignment */
+ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
+ }
+
+ if (cpu_is_pxa300()) {
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
+ }
+
+ if (cpu_is_pxa310()) {
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
+ }
+}
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
new file mode 100644
index 0000000..63cb36b
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -0,0 +1,173 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite_pxa320.c
+ *
+ * PXA320 specific support code for the
+ * PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mfp-pxa320.h>
+#include <asm/arch/zylonite.h>
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO6_2_LCD_LDD_0,
+ GPIO7_2_LCD_LDD_1,
+ GPIO8_2_LCD_LDD_2,
+ GPIO9_2_LCD_LDD_3,
+ GPIO10_2_LCD_LDD_4,
+ GPIO11_2_LCD_LDD_5,
+ GPIO12_2_LCD_LDD_6,
+ GPIO13_2_LCD_LDD_7,
+ GPIO63_LCD_LDD_8,
+ GPIO64_LCD_LDD_9,
+ GPIO65_LCD_LDD_10,
+ GPIO66_LCD_LDD_11,
+ GPIO67_LCD_LDD_12,
+ GPIO68_LCD_LDD_13,
+ GPIO69_LCD_LDD_14,
+ GPIO70_LCD_LDD_15,
+ GPIO71_LCD_LDD_16,
+ GPIO72_LCD_LDD_17,
+ GPIO73_LCD_CS_N,
+ GPIO74_LCD_VSYNC,
+ GPIO14_2_LCD_FCLK,
+ GPIO15_2_LCD_LCLK,
+ GPIO16_2_LCD_PCLK,
+ GPIO17_2_LCD_BIAS,
+
+ /* FFUART */
+ GPIO41_UART1_RXD,
+ GPIO42_UART1_TXD,
+ GPIO43_UART1_CTS,
+ GPIO44_UART1_DCD,
+ GPIO45_UART1_DSR,
+ GPIO46_UART1_RI,
+ GPIO47_UART1_DTR,
+ GPIO48_UART1_RTS,
+
+ /* AC97 */
+ GPIO34_AC97_SYSCLK,
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* Keypad */
+ GPIO105_KP_DKIN_0,
+ GPIO106_KP_DKIN_1,
+ GPIO113_KP_MKIN_0,
+ GPIO114_KP_MKIN_1,
+ GPIO115_KP_MKIN_2,
+ GPIO116_KP_MKIN_3,
+ GPIO117_KP_MKIN_4,
+ GPIO118_KP_MKIN_5,
+ GPIO119_KP_MKIN_6,
+ GPIO120_KP_MKIN_7,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO126_KP_MKOUT_5,
+ GPIO127_KP_MKOUT_6,
+ GPIO5_2_KP_MKOUT_7,
+
+ /* Ethernet */
+ GPIO4_nCS3,
+ GPIO90_GPIO,
+};
+
+#define NUM_LCD_DETECT_PINS 7
+
+static int lcd_detect_pins[] __initdata = {
+ MFP_PIN_GPIO72, /* LCD_LDD_17 - ORIENT */
+ MFP_PIN_GPIO71, /* LCD_LDD_16 - LCDID[5] */
+ MFP_PIN_GPIO17_2, /* LCD_BIAS - LCDID[4] */
+ MFP_PIN_GPIO15_2, /* LCD_LCLK - LCDID[3] */
+ MFP_PIN_GPIO14_2, /* LCD_FCLK - LCDID[2] */
+ MFP_PIN_GPIO73, /* LCD_CS_N - LCDID[1] */
+ MFP_PIN_GPIO74, /* LCD_VSYNC - LCDID[0] */
+ /*
+ * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
+ * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
+ */
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO17,
+};
+
+static int lcd_detect_mfpr[] __initdata = {
+ /* AF0, DS 1X, Pull Neither, Edge Clear */
+ 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
+ 0xc442, /* Backlight, Pull-Up, AF2 */
+ 0x8445, /* AF5 */
+ 0x8445, /* AF5 */
+};
+
+static void __init zylonite_detect_lcd_panel(void)
+{
+ unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
+ int i, gpio, id = 0;
+
+ /* save the original MFP settings of these pins and configure them
+ * as GPIO Input, DS01X, Pull Neither, Edge Clear
+ */
+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
+ pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
+ }
+
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ id = id << 1;
+ gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_direction_input(gpio);
+
+ if (gpio_get_value(gpio))
+ id = id | 0x1;
+ }
+
+ /* lcd id, flush out bit 1 */
+ lcd_id = id & 0x3d;
+
+ /* lcd orientation, portrait or landscape */
+ lcd_orientation = (id >> 6) & 0x1;
+
+ /* restore the original MFP settings */
+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
+}
+
+void __init zylonite_pxa320_init(void)
+{
+ if (cpu_is_pxa320()) {
+ /* initialize MFP */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+ /* detect LCD panel */
+ zylonite_detect_lcd_panel();
+
+ /* GPIO pin assignment */
+ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14);
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9);
+ }
+}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 4ca843e..7868f4d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -333,7 +333,7 @@ config CPU_XSCALE
# XScale Core Version 3
config CPU_XSC3
bool
- depends on ARCH_IXP23XX || ARCH_IOP13XX
+ depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx
default y
select CPU_32v5
select CPU_ABRT_EV5T
OpenPOWER on IntegriCloud